Develop Bugs

MMS issues

Alright, I rooted my EVO using the unrEVOked 3.3 method. I also NAND unlocked it. But when I flash any rom/kernel/radio. I lose MMS. Now I can root the stock sprint setup and I can receive MMS, but ANY other rom I lose the ability to get incoming pics. I have tried 2.2 roms, 2.3.3 and 2.3.4 roms with the same result every time.
Any ideas?

Any ideas?

Well I'm not sure which roms you're running, but in the latest CM7 nightlies, its a known bug with the MMS issue; you can send them, but they won't receive; its getting worked on.
I suppose a work around for now would be to stay on that stock rom you were on, or notify the people that are sending them, and have mms [pic, song, ect] sent to an email account, in which you can download it from.

Thanks, I have tried 15 different roms in the past 2 days. Even ones that say MMS works. I'm just gonna stick on stock for now until I know for sure I can get a good running rom with at least MMS working.
Thank you

Hopefully it does get fixed, but no problem.

You could always revert to stock Ruu and see if that fixes anything. Also, try wiping everything before you flash, including boot and system.

You could try as someone above said, do a full wipe. In Amon RA do a full wipe: data: factory reset, data, cache, dalvik cache. Then use Caulkin's Format All (search for it you'll find it somewhere on here). Flash into a sense ROM, Kings UNleashed R5 is good. Then update profile and PRL & see if that works. I had a similar problem and did these steps and it worked again. Similarly, if you want to try an AOSP rom like CM7 or MIUI, do this in a sense rom before hand and then just wipe cache, dalvik cache, then flash new ROM and the profile and PRL will still be in tact.
Hope that helps.

[Q] No data CM9

I flashed the newest alpha build last night. I can connect to wifi with out a problem but as soon as I try to switch over to my Sprint connection all fails. The signal bars never turn blue to show connectivity.
I've tried to ODIN back to FC15, worked fine before I went to FC22. Tried updating PRL and data from settings, no dice. Not sure really what to be looking for when I access *#*#INFO#*#*.
Thanks for looking.

DizDroid said:
I flashed the newest alpha build last night. I can connect to wifi with out a problem but as soon as I try to switch over to my Sprint connection all fails. The signal bars never turn blue to show connectivity.
I've tried to ODIN back to FC15, worked fine before I went to FC22. Tried updating PRL and data from settings, no dice. Not sure really what to be looking for when I access *#*#INFO#*#*.
Thanks for looking.
Click to expand...
Click to collapse
Mine works fine, I would re-download CM9 and try a fresh install.

Doing so now, if that fails do you think going back to a stock leak, getting a connection would be the way to go next?

DizDroid said:
Doing so now, if that fails do you think going back to a stock leak, getting a connection would be the way to go next?
Click to expand...
Click to collapse
You could, but in all honesty it just sounds like u either had a bad download or a bad install. Make sure you wipe everything. This is how I installed it...
1.Mobile Odin el26 stock cwm kernel
2.Wipe data/cache/dalvik cache
3.Flash Calks Format ALL
4.Flash CM9
5.Flash Gapps
6.Flash FC22 modem
7.Reboot

jayo727 said:
You could, but in all honesty it just sounds like u either had a bad download or a bad install. Make sure you wipe everything. This is how I installed it...
1.Mobile Odin el26 stock cwm kernel
2.Wipe data/cache/dalvik cache
3.Flash Calks Format ALL
4.Flash CM9
5.Flash Gapps
6.Flash FC22 modem
7.Reboot
Click to expand...
Click to collapse
I installed that exact way too. I think I can rule out bad download because I used the same files on my other ET4G. No problems with it.
Only thing I did different was formatted the system before I wiped everything. Is there a problem with that?

When you use that file for Odin, it wipes your broadband which is your modem. So do what they said above and install Modem FC22

kyhassen said:
When you use that file for Odin, it wipes your broadband which is your modem. So do what they said above and install Modem FC22
Click to expand...
Click to collapse
When I use what file in ODIN, the EL26 recovery? Do or do I not need to mount system before install?

Just tried another fresh install. Redownloaded CM9, GApps, and the FC22 modem. Did not mount system this time. Still no dice.

[Q] Cannot boot GNex LTE after 4.1 issues..

I have been running 4.1 for about a week now, last night I had to reboot and after rebooting it wouldn't come back up. I had this issue previously and wiped Dalvik and it would boot, however, not this time. I've tried everything I can think of. Nandroid (4.0.4) restores fail on data, I've tried wiping data, cache, dalvik and trying to install a clean ROM (4.0 and 4.1) to no avail.
Any suggestions? I would really love to get my data off the phone before I have to delete absolutely everything. When I go into mount usb storage, I can't access the phone from my PC...

I flashed a rom and now my phone is just rebooting

I rooted my phone, downloaded the jedi mind trick rom and attempted to flash it. I deleted and format my phone in CWM and i installed the rom from an internal sdcard. Now it keeps resetting and wont turn on. What should I do now?

Have you tried jamison's cache wipe?
Sent from my HTC One using xda app-developers app

Im downloading the stock telus rom in an attempt just to start from the beginning. When I flash it I'll get back to you. I was rushing when I rooted it the first time I guess.

Okay so I've done that and have rooted it using the s2 toolkit. what steps should I take to ensure the jedi mind trick rom can be successfully flashed?

Okay I tried reflashing it again... Didn't work, I have the same problem. I did the factory settings, and wiped the cache and flashed the rom. I then went into advanced and cleared the Devac (sp) cache and fixed permissions. I rebooted and it didn't work. It starts, gets to about the loading circle graphic and just resets

I used Darkside super wipe and it worked for me...
ive done it like this.
flashed original stock rom via odin
Root via S2 toolkit
flash cmw with toolkit as above
and flash custom rom via s2 toolkit
and after that used darkside superwipe

thanks for the tip, I tried the darkside wipe but it still is happening.

I have the same exact thing. But for me it's different. It started with the PACman 22.0.1. Whenever I press the power button to turn on/off the screen, it would restart a couple of seconds later being stuck in an infinite reboot loop. Can't get into recovery mode (used TWRP 2.3.3.1 and 2.5). I somehow managed to revert back to stock which worked properly. Rooted and installed PACman 22.1.1 ROM and it's still stuck on a reboot loop.
I don't know if it's a hardware problem (wiring off power button to the circuit is damaged) or a software code that messed up the machine code in the circuit.

i had the same when i installed wrong kernel and radio...try it like this..instal stock
http://forum.xda-developers.com/showthread.php?t=1513359
and then try cwm recovery version from the s2 toolkit (try non touch ver.)
and then try flashing

try doing a factory reset, wipe cache and install rom. don't wipe cache or anything after that until after it boots. btw don't use cwm wipe cache, try the one that is stickied in development forum.

[Q] "gapps stopped" loop after CWM restore

Hi,
I was frustrated with the delay in T-Mobile's release of KitKat for the GSIII, so I decided to root my phone last night in order to try flashing CM11 on it. Rooted my phone with Towelroot, installed ROM Manager and CWM, and created backups on Kies and through CWM. Then I proceeded to do data wipe/factory reset, cache wipe, and /system format. Tried to flash CM11, but got a status 7 error.
I freaked out, so I decided to restore everything from the backup I'd created. Restoration seemed like a success, but now I get the error "Unfortunately, the process com.google.process.gapps has stopped" in an endless loop, and it prevents me and any apps from doing anything. I tried clearing dalvik cache in recovery, but the problem still persists. Read on a few threads that I should flash to stock firmware via Odin, but I'm currently on a macbook, so I can't install it.
tl;dr - Prepped to flash CM11, reached status 7 error, got freaked out, and did restore via CWM, only to get infinite loop of gapp crashes. No access to Odin or PC. Not hard bricked or soft bricked, but essentially useless phone. Help? );

if you can still get to recovery, download latest gapps and flash that

Did you factory reset before or after you restored your back up?

Yeah, I've tried flashing gapps--no avail.
And yeah, I did factory reset/data wipe, cache wipe, /system format 3x each before attempting to restore. Was that wrong? /:

Try to factory reset again

vvnn said:
Yeah, I've tried flashing gapps--no avail.
And yeah, I did factory reset/data wipe, cache wipe, /system format 3x each before attempting to restore. Was that wrong? /:
Click to expand...
Click to collapse
If I'm not mistaken, there is some device ID that will change each time you flash a new rom. It may be something to do with this ID not matching the one in the restored data. Purely a guess but seems logical to me.
Anyway, factory resetting will most likely solve this for you, but I wanted to add that except in certain circumstances, you shouldn't ever manually format /system. (and one format on any partition is sufficient. There shouldn't be any need to format multiple times). If you format /system, you are wiping the O/S off of your device. Then what happens if you have problems flashing a rom, or firmware? I've seen it happen many times and I often end up spending a couple of days working with them just to get the thing to boot up again!
When you flash a rom, the first thing it does is format /system. So there is just no need to do this manually. At least if the rom fails to flash (such as failing the assert checks), youll still have something to boot into. Hope this helps in the future!

I have had the exact same issue. I have a Samsung note 2 N7105. I rooted made a backup in CWM and flashed ditto n3/s5 rom made another backup in CWM. No issues. Got a bit cocky seen as it was my first time doing anything like that. My next adventure was to try a custom kernel (agni). This didn't go so well, so I tried to do a restorw to my working backup of ditto n3/s5 rom through CMW. restore went smoothly and the phone booted. once I opened the lock screen I got the gapps error as described. I had to do a factory reset to get the phone working and then re-flashed ditto n3/s3. I've since flashed other roms and when ever I try to do a restore, I get the issue described. Note I am using the latest CWM. I putting off flashing and trying any other ROMs because of this issue. I do love dn3/s5 but id love to try others. Anyone can help it would be appreciate.