Solotions , i found in Google groups :
Here is your solotion :
The workaround that worked for me was to open Settings -> Language & input -> Text-to-speech output -> Google TTS Engine -> Language and change from the default (???) to English.
Hope it will work for you !! Did for me !!
Related
I know XT9 has been a subject of many posts but...
I owe i-mate ultimate 8150. It does have XT9 as default - It's good.
Now...Because I'm polish - I wanted to add polish language to it.
I found the ldb and kdb files and just added them to the registry just like other languages that were already there.Unfortunately the phone doesn't switch to this language.
I modyfied/Added the following keys:
[ H K E Y _ L O C A L _ M A C H I N E \ S o f t w a r e \ T e g i c \ e T 9 \ I M E \ K D b F i l e s ]
" 0 6 1 5 " = " p l h p d . k d b "
[ H K E Y _ L O C A L _ M A C H I N E \ S o f t w a r e \ T e g i c \ e T 9 \ L d b F i l e s ]
" 0 1 1 5 " = " P L l s U N _ x t 9 . l d b "
[ H K E Y _ L O C A L _ M A C H I N E \ S o f t w a r e \ T e g i c \ e T 9 ]
" A v a i l a b l e L a n g u a g e s " = " 0 1 0 9 , 0 1 0 C , 0 1 1 0 , 0 1 0 7 , 0 1 0 A , 0 1 1 6 , 0 1 1 9 , 0 1 1 5 "
Everything just like other instructions on the net say although With 8150's XT9 - the registry for tegic files look a little bit different. - There is no mappings key and kdb files are binary - not text files.
I even tried to just add test Polish lang by copying english ldb and kdb into new (PLIsUN_xt9 and polish) filenames - no joy.
I'm beginning to think that XT9 on i-mate is specifically compiled and can only serve languages included by default.
So I thought I could get the T9 files from somebody else and replace the defaults.
xt9 on i-mate ultimate 8150 is installed from extended rom right after first turn on/restoring to factory settings.
Unfortunetly I couldn't find any cab that would include all necessary files.
So my questions is...Could someone please provide the files of XT9 - for let say HTC phone or maybe ASUS (including eT9ime.dll and impie.dll) as ZIP or CAB?
I know that going this route i'm gonna have to create the keyboard mappings for ultimate 8150 but I'm willing to do that as long as I know Polish ldb and other can work on this platform.
Alternatively - Has any one manged to successfully add non default language to his/hers i-mate ultimate 8150 ?
REGEDIT4
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\Bitmaps]
"0909"="eT9.SQR.English.bmp"
"090C"="eT9.SQR.French.bmp"
"0907"="eT9.SQR.German.bmp"
"0910"="eT9.SQR.Italian.bmp"
"090A"="eT9.SQR.Spanish.bmp"
"0919"="eT9.SQR.Russian.bmp"
"01FF"="eT9.SQR.Accented.bmp"
"04FF"="eT9.SQR.Symbol.bmp"
"02FF"="eT9.SQR.Emoticon.bmp"
"091D"="eT9.SQR.English.bmp"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\KdbFiles]
"0909"="eT9.SQR.English.kdb"
"090C"="eT9.SQR.French.kdb"
"0907"="eT9.SQR.German.kdb"
"0910"="eT9.SQR.Italian.kdb"
"090A"="eT9.SQR.Spanish.kdb"
"0919"="eT9.SQR.Russian.kdb"
"091D"="eT9.SQR.Swedish.kdb"
"01FF"="eT9.SQR.Accented.kdb"
"04FF"="eT9.SQR.Symbol.kdb"
"02FF"="eT9.SQR.Emoticon.kdb"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\LanguageKeyboardIDMapping]
"0109"="0909"
"010C"="090C"
"0107"="0907"
"0110"="0910"
"010A"="090A"
"0119"="0919"
"011D"="091D"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\IME\KdbFiles]
"0609"="enhpd.kdb"
"060C"="frhpd.kdb"
"0607"="dehpd.kdb"
"0610"="ithpd.kdb"
"060A"="eshpd.kdb"
"0619"="ruhpd.kdb"
"061D"="svhpd.kdb"
"07FF"="eT9.HQD.kdb"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Layout Text"="eT9 IME"
"Ime File"="\\windows\\eT9ime.dll"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010419]
"Layout Text"="eT9 IME"
"Ime File"="\\windows\\eT9ime.dll"
"Keyboard Layout"="00000409"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e001040C]
"Layout Text"="eT9 IME"
"Ime File"="\\windows\\eT9ime.dll"
"Keyboard Layout"="00000409"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010407]
"Layout Text"="eT9 IME"
"Ime File"="\\windows\\eT9ime.dll"
"Keyboard Layout"="00000409"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010410]
"Layout Text"="eT9 IME"
"Ime File"="\\windows\\eT9ime.dll"
"Keyboard Layout"="00000409"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e001040A]
"Layout Text"="eT9 IME"
"Ime File"="\\windows\\eT9ime.dll"
"Keyboard Layout"="00000409"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e001041D]
"Layout Text"="eT9 IME"
"Ime File"="\\windows\\eT9ime.dll"
"Keyboard Layout"="00000409"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip]
"DefaultInputModule"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\IME]
"DefaultInputModule"=dword:00000001
"KeyboadLayout"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\LdbFiles]
"0109"="ENlbUN_xt9s.ldb"
"010C"="FRlsUN_xt9s.ldb"
"0107"="DElsUN_xt9.ldb"
"0110"="ITlsUN.ldb"
"010A"="ESlsUN.ldb"
"0119"="RUlsUN_xt9.ldb"
"011D"="SVlsUN.ldb"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\InputModuleDlls]
"1"="eT9DisInput.dll"
"0"="eT9RegInput.dll"
[HKEY_CLASSES_ROOT\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}\IsSIPInputMethod]
@="1"
[HKEY_CLASSES_ROOT\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}\InprocServer32]
@="\\Windows\\eT9Sip.dll"
[HKEY_CLASSES_ROOT\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}\DefaultIcon]
@="\\Windows\\eT9Sip.dll"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9]
"PasswordTimeout"=dword:000002ee
"ResetDB"=dword:00000000
"SpellCorrectionMode"=dword:00000000
"Prediction"=dword:00000001
"AutoAppend"=dword:00000001
"AutoSubstitution"=dword:00000000
"WordCompletion"=dword:00000001
"MultitapWordCompletion"=dword:00000001
"DefaultLanguage"=dword:00000109
"AvailableLanguages"="0109,0119,010C,0107,0110,010A,011D"
"InstallFolder"="\\Windows"
"CustomClassNames"=multi_sz:"WCE_EDIT","JBED_TEXTFIELD","ALT:sbedit","WMOpera_EditEx","TJEDIT","nEdit","Opera_MainWndClass"
[HKEY_CLASSES_ROOT\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}]
"Desc"="XT9"
@="XT9"
[HKEY_LOCAL_MACHINE\SOFTWARE\ASUS\ControlPanel\eT9Settings]
"CMD"=""
"EXE"="\\Windows\\xT9Settings.exe"
"Group"=dword:00000001
"AutoMode"=dword:00000000
"DisplayName"="eT9 Settings"
fuul registry xT9 asus P526 but Polish no
eT9
Thanks.
I made some little progress with this issue.
It's still not what I need but better than nothing.
I have eT9 files from some HTC - so I replaced eT9ime.dll and others what resulted in being able to choose polish language from list of available langs. Could not choose others though .
Polish language worked but only with ldb file for qwerty keyboard so writing on the num pad keyboard was impossible - but hey - eT9 worked .
I had 12 key ldb from the same package I had the qwerty keyboard ldb but this file didn't work - only numbers.
At the moment I'm thinking of installing old T9 taken from asus p525 to check...as xT9 doesn't seem to work.
But hey - If anyone see some fundamental errors in my approach to get xT9 on this i-mate ultimate 8150 or has successfully installed other than default language on it - give me a shout by leaving a note here please .
Hi !
I'm a new french member !
I've got a problem with my Asus P527 and the XT9.
I can't use the T9, it's only typing numbers and I can't use the mode "abc" or "symbols". When I press the "*" touch, it doesn't change anything ...
I asked the Asus hotline, they told me to send them...
Is there any solution ?
I tried to modify the registry base and it doesn't work either ...
Thanks for your replies !...
xT9
If you get just the numbers - you screw something up.
Just do the FACTORY SETTINGS from Settings menu and you should get you xT9 back.
REMEMBER to backup all you apps and contacts before you do that as you will WIPE the device with factory settings program !
Thanks for your answer a.key !
I tried to reset to Factory Settings and right before reseting, the system ask to type "1234" and the t9 worked à that moment (in "abc" mode)!!! ...
But even with the factory settings, I can't use the T9 with SMS, notes, etc...
Do you have any idea of what could make it works?...
Now I can use the T9 in "abc" mode or in "symbols" mode but not in predictive mode ...
I've got another question : Is there any update wm6.1 in french version for the Asus P527 ?...
Default mode "abc":
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\IME]
"CarrierDefaultTextMode"=dword:00000000
Default mode "XT9":
"CarrierDefaultTextMode"=dword:00000001
Dear all,
Hello,
I am using IJBO and wants to set connection TELKOMFLASH (Indonesia) as a default connection.
How to set up step by step?
The network option is just CELLULAR LINE (GRPS)
but the IJBO can support UMTS 2100 (HSDPA) - 3G
how to set the CELLULAR LINE (3G, GPRS) like on Manila ROM (WM 6.1)
Thanks so much
CASE CLOSED
Thanks all
if you use the card hallo from Telkomsel, you can directly use telkomselflash directly from your pda, pda with you in the setting as follows:
start > setting > connection tab > tab add new modem connction > enter name connection ( telkomsel flash ) > select a modem ( celular line GPRS ) > acces point name ( internet )
sorry my bad english
regards
[email protected]
( indonesia )
nytto said:
if you use the card hallo from Telkomsel, you can directly use telkomselflash directly from your pda, pda with you in the setting as follows:
start > setting > connection tab > tab add new modem connction > enter name connection ( telkomsel flash ) > select a modem ( celular line GPRS ) > acces point name ( internet )
sorry my bad english
regards
[email protected]
( indonesia )
Click to expand...
Click to collapse
gmn dengan seeting proxynya? help donk..?
As you probably know HTC ezsip 2.1 disables native winmo SIP methods like handwriting and the native keyboard. Luckily you can reenable these via some regkeys.
First create the following dword value:
Code:
HKLM\Software\HTC\ezsip\
SIPMenuEnableMSSIP=1
Now go HKCR\CLSID\ and find the GUID of the SIP you want to enable:
Code:
Keyboard -> {42429667-ae04-11d0-a4f8-00aa00a749b9}
Block Recognizer -> {42429691-ae04-11d0-a4f8-00aa00a749b9}
Letter Recognizer -> {42429667-ae04-11d0-a4f8-00aa00a749b9}
Transcriber -> {F0034DD0-2AD4-11d1-9CB0-E84BE8000000}
Phone Pad -> {51A2CB38-154E-4C92-A625-A83871C99EC2}
then open the subkey IsSIPInputMethod and change the deafult value to 1
For example, if you want to enable the MS keyboard, make the following modification:
Code:
HKCR\CLSID\{42429667-ae04-11d0-a4f8-00aa00a749b9}\IsSIPInputMethod\
Default=1
Now you can copy and past in any application using ctrl+c and ctrl+v
mnet said:
As you probably know HTC ezsip 2.1 disables native winmo SIP methods like handwriting and the native keyboard. Luckily you can reenable these via some regkeys.
First create the following dword value:
Code:
HKLM\Software\HTC\ezsip\
SIPMenuEnableMSSIP=1
Now go HKCR\CLSID\ and find the GUID of the SIP you want to enable:
Code:
Keyboard -> {42429667-ae04-11d0-a4f8-00aa00a749b9}
Block Recognizer -> {42429691-ae04-11d0-a4f8-00aa00a749b9}
Letter Recognizer -> {42429667-ae04-11d0-a4f8-00aa00a749b9}
Transcriber -> {F0034DD0-2AD4-11d1-9CB0-E84BE8000000}
Phone Pad -> {51A2CB38-154E-4C92-A625-A83871C99EC2}
then open the subkey IsSIPInputMethod and change the deafult value to 1
For example, if you want to enable the MS keyboard, make the following modification:
Code:
HKCR\CLSID\{42429667-ae04-11d0-a4f8-00aa00a749b9}\IsSIPInputMethod\
Default=1
Now you can copy and past in any application using ctrl+c and ctrl+v
Click to expand...
Click to collapse
can any one make a cab file for this as i tried it all and never worked
this doesn't work for me either.
actually, it does. dunno what I did wrong earlier...
Brilliant, thanks!
A cab would be handy tho'
What I have for Letter recognizer :
42429690-ae04-11d0-a4f8-00aa00a749b9
hoss_n2 said:
can any one make a cab file for this as i tried it all and never worked
Click to expand...
Click to collapse
No cab, but I found the Keybord needs
HKCR\CLSID\{615623e0-a400-11d1-8910-0000f81ea21f}\IsSIPInputMethod\Default = 1
and if you want the bigger abc keys without 123, set
HKCR\CLSID\{615623e0-a400-11d1-8910-0000f81ea21f}\KPMode = 0
Regards
what is SemcCnapProvider & SemcSnpPlatformUtil & SemcSnpVideoPlayer & ServiceMenu
what is these apps , please someone give me some details
SemcCnapProvider.apk
SemcSnpPlatformUtil.apk
SemcSnpVideoPlayer.apk
ServiceMenu.apk
Service Menu = Menu you see when typing a code in dialer
Else = media relevant
1:
(setting) > (general) > (localtion') >c (memory)
2:
setting> (Display) > font type > more font download font rosemary no set
3:
stune: https://app.box.com/s/qo91x3st6n4paicaqntu
Font: https://app.box.com/s/5fq5yp9khk8zkg7d2vgo
open stune > auto conect
qua tab browser > mount > mmc > Others > [email protected]@[email protected]@__ > pb9jj... > Res > font > bạn thả font Rosemary ở trên vào
4(setting ) > (display) > font type> và set font Rosemary
Sr I bad English. thank all :victory:
You know that other languages than english aren't allowed on XDA?
Sent from my GT-I9500 using Tapatalk