I recently flashed CM7.2 and now my GT-5660M won't boot up? Before I flashed it, I followed the instructions, which said to wipe data, and so I did!
My phone still won't boot up so I flash my phone again with the Particle android's ROM.
So then I try flashing CM7 again and still my phone is stuck at splash screen? Any help?
I'll edit this post to reply to your comments below:
----Edit---
@voetbalremco I'll try flashing from stock rom. I used ClockworkMod 5.0.2.6 Recovery
@felicee I did do those steps!?
-------------
What about flashing it from stock?? And you used the right clockworkmod version??
Sent from my GT-S5660 using xda premium
you'll have to do these steps:
boot into cwm manager, then
- wipe data
- wipe cache
- than go to advanced settings -> wipe dalvik cache
Related
ok i rooted my phone using the revolotion root and unrevoked where i had to enter my phones id to unlock the security and install superuser through recovery. i tried flashing red synergy rom from these forums its on first page of themes and phone just keeps boot looping ? i did perform wipe cache and wipe data before i did it ... now i used ot have droidx and when this happend i would just restore the phone with rsd lite how do i restore my evo4g?
Rnudles said:
ok i rooted my phone using the revolotion root and unrevoked where i had to enter my phones id to unlock the security and install superuser through recovery. i tried flashing red synergy rom from these forums its on first page of themes and phone just keeps boot looping ? i did perform wipe cache and wipe data before i did it ... now i used ot have droidx and when this happend i would just restore the phone with rsd lite how do i restore my evo4g?
Click to expand...
Click to collapse
Well before flashing the ROM did you create a back up?
And when ever your flashing a ROM your suppose to do a FULL WIPE not just cache and dalvik
no used to doing this on droidx and i would just start from scratch if a flash didnt go through good
i read you cant flash roms with unrevoked is that true ? i can also still get into clockwork recovery should i just try another rom ?
You can flash roms fine with revolutionary and the version of cwm it installs. Try booting to recovery wipe data cache and dalvik cache, reflash ROM and boot to system.
Sent from my PG86100 using XDA Premium App
i see wipe cache and wipe data were is wipe delvik cache ?
mikedavis120 said:
You can flash roms fine with revolutionary and the version of cwm it installs. Try booting to recovery wipe data cache and dalvik cache, reflash ROM and boot to system.
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
Beat me too it lol
Rnudles said:
i see wipe cache and wipe data were is wipe delvik cache ?
Click to expand...
Click to collapse
That's a amon ra option
Mikes gonna have to help you in this I know Nuthin about CWM
also to fix this should i flash a theme or custom rom and i found the delvik check whipe it was in advanced
Rnudles said:
also to fix this should i flash a theme or custom rom and i found the delvik check whipe it was in advanced
Click to expand...
Click to collapse
Flash the ROM first do the theme later
Which recovery are you on? If it's TWRP: Get Amon_ra and wipe BOOT: and System: then clear data then just flash rom. It will work. I promise.
Um, you need to have the ROM installed before you can flash a theme for that same ROM.
ALSO, I strongly recomend flashing AmonRA 2.3 to your phone before doing anything else.
If you are going to use Synergy, please follow the directions for partitioning the sd card. Simply copy your sd card stuff onto your computer, format the sdcard then partition it. Then you can copy everything back to the sd card from your puter. It will make life a whole lot easier and faster.
Sent from my PC36100 using XDA App
I rooted my I747 using the process here: http://forum.xda-developers.com/showthread.php?t=1739426
Once rooted, I made a nandroid backup.
I booted into Clockwork recovery mode, and performed these steps:
1. Wipe factory reset
2. Wipe cache
3. Wipe Dalvik cache
4. Format /system
5. Flashed ROM (install from zip)
6. Flashed GAPP
7. Restore/advance restore data
8. Reboot
After rebooting, the phone hangs on the splash screen. I've tried both the latest AOKP build and CM10 preview. I was able to restore my original backup.
I've checked numerous threads without any luck.
Don't do #7 and it should work.
Restoring data only works when flashing between similar roms. Aosp to aosp or touchwiz to touchwiz
Sent from my SAMSUNG-SGH-I747 using xda premium
Who told you to advance restore data?
Sent from my Motorola DynaTAC 8000X
That did it, but thanks. I was following the ROM and App tutorial in 10 minutes.
I've tried to install rom 3 different times but it keeps getting stuck on the boot logo for 15 min +. Can anyone help?
What recovery are you using? if using CWM remember to use tdj cache wipe after flashing the rom
Same issue different rom
i followed the 4.04 instructoins to root
did odin
superuser
and got the stock rom rooted
made a backup
then flashed cyanogenmod 9.1.0 stable
wiped data/factory reset
wiped cache partition then rebooted
i basically followed these instructions
http://forum.xda-developers.com/showthread.php?t=1514434
cyanogen mod bootloop ive wiped everything and still no luck
using CWM recovery 5.0.2.7
kinda stinks i could root but cant load any version of cyanogen even tried 9.0.0 and nothing im still looping
lostangelino said:
i followed the 4.04 instructoins to root
did odin
superuser
and got the stock rom rooted
made a backup
then flashed cyanogenmod 9.1.0 stable
wiped data/factory reset
wiped cache partition then rebooted
i basically followed these instructions
http://forum.xda-developers.com/showthread.php?t=1514434
cyanogen mod bootloop ive wiped everything and still no luck
using CWM recovery 5.0.2.7
kinda stinks i could root but cant load any version of cyanogen even tried 9.0.0 and nothing im still looping
Click to expand...
Click to collapse
Thats because you are using the stock recovery and on CM roms you need to use tdj super wipe cache after you flash the rom...
this is the instructions I use everytime I flash a rom
wipe factory reset 3 times
wipe cache 3 times
wipe dalvic
flash tdj super wipe
flash rom
flash gapps (if im flashing any aosp roms)
flash tdj cache wipe
reboot
I have a Galaxy S i9000 with darky v11 ROM which is in ICS.I tried to flashed it with JB rom of cm-10-20120906-NIGHTLY-galaxysmtd and it went into some sort of bootloop..(it goes to start and then CWM appears then samsung logo and then CM9 logo appears again and again) I did wipe cache, wipe data and dalvik cache first before flashing the CM10.
the situation lasted for about 15 mins and I realized that something is wrong.
I have no choice now but to take out the battery and enter recovery and then I make a restore, my current restore point is Darky v10.4.2 but the CMW is stucked to restoring boot
what should I do to fix this problem?
any help from you guys will be appreciated thanks.
This thread gave me cancer.
Sent from my GT-I9000 using xda app-developers app
DanielSanchez said:
This thread gave me cancer.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
lol
Jayfunk said:
I have a Galaxy S i9000 with darky v11 ROM which is in ICS.I tried to flashed it with JB rom of cm-10-20120906-NIGHTLY-galaxysmtd and it went into some sort of bootloop..(it goes to start and then CWM appears then samsung logo and then CM9 logo appears again and again) I did wipe cache, wipe data and dalvik cache first before flashing the CM10.
the situation lasted for about 15 mins and I realized that something is wrong.
I have no choice now but to take out the battery and enter recovery and then I make a restore, my current restore point is Darky v10.4.2 but the CMW is stucked to restoring boot
what should I do to fix this problem?
any help from you guys will be appreciated thanks.
Click to expand...
Click to collapse
I had the same issue. And I fixed it by manually getting into CMW by three button combo
Steps done..
1. Flash gb stock
2. Root it
3. Do factory wipe/clear cache/clear dalvik. Install cm 9 and go to CWM byt three button combo.
4. Do factory wipe/clear cache/clear dalvikInstall cm 10.. after selecting installation file I had a boot loop.
5. Did 3 button combo and got to CWM recovery and did actory wipe/clear cache/clear dalvik and selected cm 10 and second time it went fine.
6. Install gapps after finishing cm 10 install and do factory wipe/clear cache/clear dalvik cache
All working good now...
Kool stuff guys..any change log? Screenshots?
Thanks again for this amazing info
Sent from my GT-I9000 using Tapatalk 2
flash kernel with odin and reflash the rom
FIX and explanation how to go back and forth between CM9 and CM10 nandroid backups:
Same thing happens to me when I switch from CM9 to CM10 . I start flashing CM10 and about half the installation the phone goes into loop with cwm-samsung logo and so forth . I just pull the battery out and then I enter CWM again, wipe everything again and I flash CM10 again and gapps. The installation will succeed this time and the phone will boot. I think this happens because the partition method is being changed.
If you are on CM10 or an JB rom and want to restore CM9 or ICS nandroid backup, first wipe everything, flash the CM9 or ICS rom , let it boot and then go into recovery and wipe everything and then restore the ICS nandroid backup.
If you are on CM9 or an ICS rom and want to restore CM10 or JB nandroid backup, first wipe everything, flash the CM10 or JB rom , let it boot and then go into recovery and wipe everything and then restore the JB nandroid backup.
YOU NEED TO DO THESE STEPS BECAUSE ICS AND JB HAVE DIFFERENT PARTITION METHODS AND JUST RESTORING NANDROID WILL NOT CHANGE IT.
Close and delete this thread please this is development section.
This is the first time i flash my phone to move to the darkside.
T989 running ClockworkMod Recovery 6.0.1.5 , Flashed with DARKSIDE.SUPER.WIPE_EXT4 / CM10 Stable. After complete the flash and stuck on the CM splash screen.
After read the CM10 Thread, that mentioned i should not use the dakrside wipe.
1 - I can boot into CWM mode
2 - Cache and dalvik cache cannot wipe Any suggest that i should proceed next or thats bricked????
3 - If restore, the USB keep prompt error
Thanks
fireharuka said:
This is the first time i flash my phone to move to the darkside.
T989 running ClockworkMod Recovery 6.0.1.5 , Flashed with DARKSIDE.SUPER.WIPE_EXT4 / CM10 Stable. After complete the flash and stuck on the CM splash screen.
After read the CM10 Thread, that mentioned i should not use the dakrside wipe.
1 - I can boot into CWM mode
2 - Cache and dalvik cache cannot wipe Any suggest that i should proceed next or thats bricked????
3 - If restore, the USB keep prompt error
Thanks
Click to expand...
Click to collapse
Your phones fine
If you can get into recovery. wipe data, wipe factory reset, wipe dalvik wipe cache. Flash cm10. Flash gapps. Reboot.
If you can't wipe anything in recovery and it freezes up. Your recovery is broken and you have to reflash it via Odin. Then go back and do what I said above
NEVER USE DARKSIDE SCRIPTS WITH CWM 6.XXXXXX OR TWRP 2.2.XXXXXXX OR 2.3XXXXX
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Sorry for newbie question, when i reflash via odin. Do i process in the phone mode or CWM mode? please advise
garth719 said:
Your phones fine
If you can get into recovery. wipe data, wipe factory reset, wipe dalvik wipe cache. Flash cm10. Flash gapps. Reboot.
If you can't wipe anything in recovery and it freezes up. Your recovery is broken and you have to reflash it via Odin. Then go back and do what I said above
NEVER USE DARKSIDE SCRIPTS WITH CWM 6.XXXXXX OR TWRP 2.2.XXXXXXX OR 2.3XXXXX
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
fireharuka said:
Sorry for newbie question, when i reflash via odin. Do i process in the phone mode or CWM mode? please advise
Click to expand...
Click to collapse
I don't know what your saying. https://www.youtube.com/watch?v=Tcffczu-0qA&feature=youtube_gdata_player. Watch this video. Download the files specified but the only files you will actually need are the Odin app and "Hercules.tar.cwm file. The only steps youd actually need to follow start at 3:50 and end at 6:27. This method will reinstall cwm version 5.0.xxxxx. As usual hold up down power to get into recovery mode. Use dark side super wipe and reinstall ROM and gapps then dark side cache wipe. since it IS the older cwm version 5.0.xxxx you do need the scripts. Once everything looks good and you decide to upgrade your recovery DONT use the scripts anymore. The newer recoveries do the work for the scripts
Edit:
Unlike the video explains you want to enter download mode before connecting your phone to Odin. I think to get into download mode you hold volume up / down then plug USB from pc into phone.. All at the same time
Sent from my SAMSUNG-SGH-T989 using xda app-developers app