Related
When i make a call the call is immediately interrupted (after a short *bleep). Getting called works though.
I have done a full-wipe and using:
- LeeDrOiD V2.3.4 BETA 4 R2
- Radio_12.28e.60.140f_26.04.02.17_M2_SF - HTC WWE 1.72.405.3 R2
After some simple tests i found that wifi was interrupting the call. When disabling wifi i can make calls again.
I think i have the corresponding logfile (using adb logcat).
I am aware that the rom i am using is still a beta, but since i haven't (yet) found any other user having the same issues i decided to create this question thread. Who can give me some advice to fix this problem? Thanks!
When wifi is on, but not connected to a wifi-network i can make phone calls. Only when connected to a wifi-network, the call immediately gets disconnected after a short bleep.
Found only a single user having simular issues, only he runs on another ROM:
http://code.google.com/p/cyanogenmod/issues/detail?id=2732
E-mailed this person but we both came to the conclusion his problem was different and solved by a ROM update.
Attached is the logcat output. Three lines got my attention:
Code:
D/CallNotifier( 7167): - onDisconnect: cause = ERROR_UNSPECIFIED, incoming = false, date = 1300277007142
D/CallNotifier( 7167): - DisconnectCause is ERROR_UNSPECIFIED: play TONE_CALL_ENDED!
D/InCallScreen( 7167): onDisconnect: incoming: false state: DISCONNECTED post dial state: NOT_STARTED, cause=ERROR_UNSPECIFIED
Full-wiping again and installing LeeDrOid again didn't fix the problem. Installing CoreDroid V4 didn't fix the problem either.
Anyone got some advice how to fix this problem on the Gingerbread beta releases?
Just letting you guys know my issue is resolved, maybe it will help anyone later on experiencing same issues.
I found out not only disabling wifi will make outgoing calls work again, also changing the network settings from 'gsm / wcdma automatic' to 'only gsm' and reverting back again temporarily fixed the problem (outgoing calls were allowed again while wifi was enabled).
I Just flashed a new radio: Radio_12.41.60.19_26.06.04.14_M_Test - HTC Ace Gingerbread S Generic 2.16.0.0
Now everything is working as it should be! I thought it wouldn't be the radio as the issue was solved on an older rom with the same radio.
Edit: The problem persists. At first it seemed to work, but later on the problem came back. It looks like the Gingerbread beta contains a bug, but strange enough not effecting much people... Comparing the dmesg log with a dmesg log of a successful call pointed out that the next few logs are missing on a interrupted call:
Code:
[10894.955902] wds: 0020 @ 01
[10894.956024] qmi: wds: got handle 0x02a73d58
[10894.956542] wds: 0022 @ ff
[10894.956665] qmi: wds: CONNECTED
[10894.957977] wds: 002d @ 01
[10894.958068] qmi: got network profile
[10894.959259] rmnet_open()
Can anyone figure this out?
Isn't there anyone that can help me find out what is wrong or how to troubleshoot this furthermore? Can someone help me analyze the log files. The last thing i want to do is revert to stock and send the phone back for repair . Please advice!
I think it is a kernell/radio issue....
Yes it really looks like a kernell thing, now running excellent on LeeDroiD HD 2.2.2 with LeeDroiD's kernel 2.2.8 using radio 12.28e.60.140fU_26.04.02.17_M2. Still find it strange i am one of few experiencing it. That's the only thing that makes me uncertain about this being a kernell issue, as others should then have experienced simular problems wouldn't they?
I think i will just have to wait for a new (major) kernell release of GB.
Hey,
I am using CM7 and get this issue as well.
Sometimes when I call people all I get is a beep and it disconnects.
Switching to 2g works for me but that is not a good solution imo.
Wish I could get this fixed.
I am glad to see I'm not on my own on this one! 2g isn't a fix for me either, its a not-so-pleasant workaround. Temporarily disabling wifi was a faster workaround, maybe this works for you too. I went back to 2.2.1 because of this problem, maybe you should too.
Please keep me updated!
I always have wifi off when out and about.
Did you get stock rom or something? Post a link to the rom please.
I am just about to try cm7 rc3 - out today.
I installed RUU_Ace_HTC_WWE_1.32.405.6_Radio_12.28b.60.140e_26 .03.02.26_M_release_155891_signed.exe from http://forum.xda-developers.com/showthread.php?t=824357
After that i gained root and ENG S-OFF again, did a full-wipe and installed LeeDroiD HD 2.2.2 with LeeDroiD's kernel 2.2.8 (http://forum.xda-developers.com/showthread.php?t=842802) followed by radio 12.28e.60.140fU_26.04.02.17_M2 (http://forum.xda-developers.com/showthread.php?t=877295)
So what do you think I should do?
Go back to stock and stick with it?
That depends... I am no expert on this as I am on the same boat as you are. If this is disturbing you as much as it disturbed me you could give the ROM I am now using a go, that's LeeDroiD HD 2.2.2.
Sent from my Desire HD using XDA Premium App
Well I am using CM7 rc3 for now with the latest radio.
I have also changed to GSM auto (PRL).
Will report back tomorrow.
did you set up an voip-account with your cellphone?
I am imagining a scenario like this: voip-Account set up and the option "use internet calls" set to "for every call" (may be called differently, my rom is set to german).
Now, if you enable Wifi, your phone would try to connect to your voip provider and if that fails for whatever reason you should be getting error messages...
If you have your phone sync your settings through you google account, that would explain the error reappearing after full wipe, new radio software and even on a new rom. Flashing a 2.2 rom would make the issue disappear though, as 2.2 doesn't support voip...
Thanks for your reply! Unfortunately this was not the case. There weren't any SIP-accounts configured. I also tested this by not configuring any synchronization accounts after fully wiping and installing a Gingerbread ROM.
Sent from my Desire HD using XDA Premium App
HamsterHam said:
Well I am using CM7 rc3 for now with the latest radio.
I have also changed to GSM auto (PRL).
Will report back tomorrow.
Click to expand...
Click to collapse
Yesterday-evening i installed CyanogenMod 7.0.0-DesireHD and I did not have any issues. After that i installed CoreDroid HD GB 2.3.3 V5.1 but with that rom the problem came back. How did it go for you, you didn't report back.
So does anyone know what the similarities and differences between those two roms are? Both are running on Android 2.3.3 (Gingerbread). CM is No-Sense while CoreDroid is Sense. Are both using the same kernel? Could a difference in drivers be causing our problem? How can i find the drivers that are being used?
Have u checked your apn settings? I had to manually enter proxy and port after cm7 stable install for my phone to work.
Sent from my DHD
Yes, checked those too. At the moment happily using CM-7 without any problems, so as long i stick with this rom everything is fine. Not really a solution but at the moment very happy with this ROM.
I have tried the Kitkat ROM of Evervolv and I want to report my experience.
You can find the ROM here:
http://nikez.nu/Download.php?getFile=dlc/ev_bravo-4.0.0p2-turba.zip
I found the ROM very reliable. No crash no reboot no SOD. There are 2 main bug:
1) The hotspot doesn't work.
To fix this problem is sufficient to replace the file hostapd and hostapd_cli with those in this ZIP:
http://forum.xda-developers.com/attachment.php?attachmentid=2434441&d=1386246859
as reported here:
http://forum.xda-developers.com/showpost.php?p=48161953&postcount=128
2) The browser has flickering screen. You can disable it from Settings->Apps->All->Browser and try another browser. I use Opera because is lightweight and usable. Try it out: https://play.google.com/store/apps/details?id=com.opera.browser
Without a2sd the system is very fast and fluent. If you want to use it would suggest to use at least a Class 10 sd card otherwise the app loading and even the screen unlock can take more than 5 seconds.
If you want to install a2sd DO NOT put the dalvik cache on the sd card unless you have a very fast sd card. Otherwise this will slow down your phone. I've installed 15 / 20 app and I have about 30 MB left on the internal storage, so I think this is enough. To install app data only to sd card install the script in this way:
a2sd install
N
Y
Y
There is a feature that i liked of the previous Evervolv JB and was the home screen rotation. In this ROM there isn't such feature. In my opinion is very frustrating to have the screen rotated back to the portrait mode when in landscape mode i press the home key. To enable home screen rotation I installed Nova Launcher app and enabled screen rotation by: Nova Settings -> Look and feel -> Screen Orientation -> Auto Rotate
Thank you again to the Evervolv Team.
It's 2 week that I installed this ROM and still no problems.
The olny thing I noticed sometime is a delay in the screen power on when you want to hang up a call. The screen remains black for 3-4 seconds and then if you press the power button again it work. I think this could depend on the number of the apps opened on the phone indeed this doesn't happen every time.
VPN - Another Kitkat bug with evervolv?
Hi,
currently I'm running the ev nightly-2013-12-15. Since yesterday I tried to activate a VPN connection into my home lan (connected with an AVM Router). It does NOT work. While the "internal" VPN Software does not tell me some interesting information a second try with VPNCilla shows:
--- cut here ---
Error on establish:
command '693 interface fwmark rule add tun0'
failed with '400 693 Failed to add fwmark rule (File exists)'
Possible reason: invalid server parameter or TUN device unavailable
---cut here ---
With this error message I find in google some information about a VPN problem in 4.4. BUT: my wife's brand new nexus 5 with Kitkat connects without trouble immediately with the same login data.
So what's the problem with ev here?
Any ideas?
Thanks in advance
I have never tested VPN with android though I had problems getting hotspot to work. I had to substitute the hostapd and hostapd_cli file to fix the problem (I posted how to achieve it in the previous post).
Have you tried the turba release ? Maybe the problem is related to a nightly bug.
However It is true that the Nexus 5 has a 4.4 too but the kernel version is different. The evervolv version run with the 2.6.37 kernel version because probably the driver (or kernel modules) of the HTC desire are not available for the new kernel version 3.x.x that is the version used for Nexus 5 and other official release.
So different hardware and software can lead to different behavior of the software.
The only thing that come into my mind is to try with a shell (adb shell) to manually create a VPN connection to see what specific errors are showed up.
I think this is a great rom, which runs very smoothly.
I have currently installed the ev_bravo-nightly-2014.01.22-squished.zip from yesterday on my desire.
But I have a problem using Wifi connection. At first it worked, but now Wifi wont turn on. It also says MAC-Adress is unavailable. What I have done was to delete the app2sd script from init.d and to install Int2ExtV2 (runs perfectly). I don't know if this can cause the interference? I have not made any other changes.
It would be great if anybody knew, how to fix it.
I have not tried connecting to a VPN so far.
ProDC
Hi,
I'm running Nikez's 4.0.0p2 version and it's great! No JB rom is such stable and fast. For me, there are no bugs, but I don't use hotspot feature. Is it worth to upgrade to nightly versions? I'll maybe wait until Nikez releases next version with stable 3.0 kernel .
Do MMS work?
Sent from my HTC Desire using xda app-developers app
I haven't already tried the new nightly but I guess that it is not as stable as the 4.0.0p2. I prefer stable ROMs because I use my Desire daily. This is the most stable and faster ROM I found among Evervolv ROMs. So I would suggest you to keep the 4.0.0p2 unless you have a blocking problem with this ROM.
SemaiCZE said:
Hi,
I'm running Nikez's 4.0.0p2 version and it's great! No JB rom is such stable and fast. For me, there are no bugs, but I don't use hotspot feature. Is it worth to upgrade to nightly versions? I'll maybe wait until Nikez releases next version with stable 3.0 kernel .
Click to expand...
Click to collapse
For quimbexa :
I've tried two times but the screen only show "SENDING...". I waited for 2 hour and then i deleted the messages. So this feature could be buggy.
Why do you need this feature ? Using whatsapp or similar app it's faster and cheapest than using MMS today.
Prodc said:
I think this is a great rom, which runs very smoothly.
I have currently installed the ev_bravo-nightly-2014.01.22-squished.zip from yesterday on my desire.
But I have a problem using Wifi connection. At first it worked, but now Wifi wont turn on. It also says MAC-Adress is unavailable. What I have done was to delete the app2sd script from init.d and to install Int2ExtV2 (runs perfectly). I don't know if this can cause the interference? I have not made any other changes.
It would be great if anybody knew, how to fix it.
I have not tried connecting to a VPN so far.
ProDC
Click to expand...
Click to collapse
Are these nightlies KitKat or ...?
---------- Post added at 05:01 PM ---------- Previous post was at 04:06 PM ----------
vixx1978 said:
Are these nightlies KitKat or ...?
Click to expand...
Click to collapse
Just installed it, yup, it's KitKat
Before I start posting, I would like to make the following points very clear:
[*]I'm a NOOB when it comes to complex programming knowledge.
[*]In no way, I'm trying to raise a finger on the developers of the ROMs and Kernels.
[*]Here I'm stating only the bugs I came across when I tested the ROMs.
The purpose of posting it here is Two-fold:
So that developers can notice it and provide a quick and effective solution.
It can act as a guide for other noobs who can decide which custom ROM to install.
NOTE: THE TEST DEVICE USED IS: SAMSUNG GALAXY Y PRO DUOS (INDIAN FIRMWARE: B5512DDXWLG1, BASEBAND: B5512DDLG1) RUNNING ON STOCK KERNEL AS WELL AS ON COMPACT KERNEL BY @Deadly.
This particular Model has 2 suggested custom ROM:
Hatyon ROM by @arbayong: The link for the thread is here: http://forum.xda-developers.com/showthread.php?t=1915354
Carbom ROM by @acermedo: The link for the thread is here: http://forum.xda-developers.com/showthread.php?t=2471144
The details and the issues have been discussed in the following posts.
Hatyon ROM Issues with B5512 (Baseband: B5512DDLG1)
ISSUES WITH HATYON ROM 1.0 by @arbayong / 1.1
Before we proceed with discussing the issues with Hatyon ROM by @arbayong, lets first get familiar with the ROM:
Here is the link for the Thread of the ROM: http://forum.xda-developers.com/showthread.php?t=1915354
Test Device Details:
Model: Samsung Galaxy Y Pro Duos (GT-B5512)
Baseband: B5512DDLG1
Kernel: [email protected] #8/ Stock Kernel (2.6.35.7 [email protected] #1)
Though, It has not been long since I have started testing the Custom ROM, The initial stages have led to the following bug:
Unable to update Google Play Services and other Google apps. Google Play Services is necessary for the recent versions of many Google apps like Hangout, Gmail, YouTube etc. On updating Google Play Services via Play Store, it shows the error message "Package File is Invalid. Please uninstall the app and try again." On uninstalling the app using Link2sd and reinstalling it, it shows the error "Google Play Services is not supported by the current ROM in your device. Kindly contact the manufacturer for assistance." Please provide an immediate and detailed solution to this problem as the age-old versions of Gmail, Gtalk, YouTube is simply not tolerable.
Wi-Fi and Bluetooth do not work simultaneously. If Wi-Fi is switched on, Bluetooth wont work until Wi-Fi is switched off and phone is restarted. Similarly if Bluetooth is switched on, Wi-Fi wont work till Bluetooth is switched off and phone is restarted.
I REQUEST OTHER USERS ALSO TO STATE ANY BUGS/ ERRORS THAT HAVE BEEN DISCOVERED.
Carbon ROM Issues with B5512 (Baseband: B5512DDLG1)
ISSUES WITH Carbon ROM by @acermedo
Before we proceed with discussing the issues with Carbon ROM by @acermedo, lets first get familiar with the ROM:
Here is the link for the Thread of the ROM: http://forum.xda-developers.com/showthread.php?t=2471144
Test Device Details:
Model: Samsung Galaxy Y Pro Duos (GT-B5512)
Baseband: B5512DDLG1
Kernel: [email protected] #8/ Stock Kernel (2.6.35.7 [email protected] #1)
I could not spend much time with this ROM either, however, the initial stages revealed a couple of errors:
Wifi and Bluetooth do not work simultaneously. If Wi-Fi is on, Bluetooth wont switch on till Wi-Fi is switched off and phone is restarted. Similarly, Wi-Fi wont switch on till Bluetooth is switched off and phone is restarted.
Proximity sensor, Accelerometer and some other sensors do not function normally (or rather do not function at all).
Version 1.4 bricks the phone.
Please provide an immediate solution to the above issues.
I REQUEST OTHER USERS ALSO TO POST ANY BUGS/ERRORS IN THIS ROM
rishi.broto said:
ISSUES WITH HATYON ROM 1.0 by @arbayong / 1.1
Before we proceed with discussing the issues with Hatyon ROM by @arbayong, lets first get familiar with the ROM:
Here is the link for the Thread of the ROM: http://forum.xda-developers.com/showthread.php?t=1915354
Test Device Details:
Model: Samsung Galaxy Y Pro Duos (GT-B5512)
Baseband: B5512DDLG1
Kernel: [email protected] #8/ Stock Kernel (2.6.35.7 [email protected] #1)
Though, It has not been long since I have started testing the Custom ROM, The initial stages have led to the following bug:
Unable to update Google Play Services and other Google apps. Google Play Services is necessary for the recent versions of many Google apps like Hangout, Gmail, YouTube etc. On updating Google Play Services via Play Store, it shows the error message "Package File is Invalid. Please uninstall the app and try again." On uninstalling the app using Link2sd and reinstalling it, it shows the error "Google Play Services is not supported by the current ROM in your device. Kindly contact the manufacturer for assistance." Please provide an immediate and detailed solution to this problem as the age-old versions of Gmail, Gtalk, YouTube is simply not tolerable.
Wi-Fi and Bluetooth do not work simultaneously. If Wi-Fi is switched on, Bluetooth wont work until Wi-Fi is switched off and phone is restarted. Similarly if Bluetooth is switched on, Wi-Fi wont work till Bluetooth is switched off and phone is restarted.
I REQUEST OTHER USERS ALSO TO STATE ANY BUGS/ ERRORS THAT HAVE BEEN DISCOVERED.
Click to expand...
Click to collapse
i stopped using hatyonRom about 18 months ago and so do not have the phone to investigate the issues raised. but seeing as wifi and bluetooh cannot be used concurrently in both custom roms, i postulate that it might be an issue with gb and not necessarily the custom roms. you didn't also tell us if both wifi and bluetooth work normally on stock rom.
i am pretty sure you misquoted the baseband for hatyonrom. check my signature to be sure.
on the issue of updates, those issues seemed not to exist at the time of development so i recommend you create a patch for it yourself. simply go to stock rom. update all the apps you need new versions for, make a nandroid backup and from the backup copy the updated ups and adb push them or make a flashable zip for the rom. you can share with others. lol
dsixda kitchen could be used to make the patch.:laugh::laugh::laugh::laugh::laugh:
rishi.broto said:
ISSUES WITH Carbon ROM by @acermedo
Before we proceed with discussing the issues with Carbon ROM by @acermedo, lets first get familiar with the ROM:
Here is the link for the Thread of the ROM: http://forum.xda-developers.com/showthread.php?t=2471144
Test Device Details:
Model: Samsung Galaxy Y Pro Duos (GT-B5512)
Baseband: B5512DDLG1
Kernel: [email protected] #8/ Stock Kernel (2.6.35.7 [email protected] #1)
I could not spend much time with this ROM either, however, the initial stages revealed a couple of errors:
Wifi and Bluetooth do not work simultaneously. If Wi-Fi is on, Bluetooth wont switch on till Wi-Fi is switched off and phone is restarted. Similarly, Wi-Fi wont switch on till Bluetooth is switched off and phone is restarted.
Proximity sensor, Accelerometer and some other sensors do not function normally (or rather do not function at all).
Version 1.4 bricks the phone.
Please provide an immediate solution to the above issues.
I REQUEST OTHER USERS ALSO TO POST ANY BUGS/ERRORS IN THIS ROM
Click to expand...
Click to collapse
I m using carbon v1.4 flashed it 3 times didnt brick my phone even once.
well abt the other issues they must provide smthng constructive-update
---------- Post added at 03:20 PM ---------- Previous post was at 03:16 PM ----------
Well after testing both roms-
I rate-
Carbon rom-8/10
hatyon rom-6/10
Will be grateful if they make a good update!
Hello,
I detected the following systematic problems of cm9..11
1.) Skype cannot be started at all. It does not even react on a click of its icon. And no error message appears.
2.) the akku load status is shown incorrect during load process. E.g. after 4 hours load it shows 37% instead of true 100% (which is shown after reboot).
3.) The wonderful app 'lgCamera' runs very slow and jerky. This was fine in Android 2.x versions.
4.) the FM radio app for the WFS radio tuner (no internet radio!). How can I find it (and flash it into the system folder as a system app)?
I suppose that everybody can confirm my problems!?...
Are those already known by the development team? Cause I wonder that they are not fixed in ALL CyanogenMod versions yet!
Will there be a chance to expect their fix soon?...
5.) Furtheron I have big compatibility problems when flashing cm9..cm11 ROMs and others. Error message: "cannot load volume /misc. Can't partition non-vfat: /storage (vfat)". For nearly each ROM I have to change the recovery. Currently I change between the following recoverys (one of them allways works):
twrp-2.2.2.0, twrp-2.7.1.0, Phil-Z 6.43.7, cwm-5.0.2.8, cwm-6.0.5.3. Nobody else having that problem?...
Is there any recovery version that can read all 'formats' of zip files?...
Will there be compatibiliy at least at the backup files between all of them?...
Thank you VERY much for a quick help!
1.) not compatible anymore, say Thanks to Skype
2.) This is probably problem with battery not reading voltage correct anymore on charger (happens) for me on all roms even stock. (After 100000 of flashes and almost 3years old down sucked battery
3) ics and up isn't made for this phone, slow downs and other incompatibility can happen.
4) There is a solution called spiritfm(free) Google it, you will find the xda thread.
5) twrp 2.2.2.0 and cwm 5 is working on all ROMs beside newer kk builds (needs recovery compiled with TLS support, newest ones available)
Greetings Kevin
Hallo Kevin,
I am so glad that you answer! Thank you very much!!
to 1.) Yes, I realised meanwhile that Skype 4 ist still running fine. So the reason why the new Skype 5 version does not work on Wildfire S (or even on all CM versions of all devices??) you don't know!?...
to 2.) So this is a general Andrid 4.x problem of Wildfire S device only?... (cause e.g. on Galaxy S4 stock (of my girl-friend) it works fine!...
to 4.) Thank you. I installed this free version '0918fr.apk' but I get the error message (su rights confirmed): "Error: No FM accessible. SU: 0 Fm:BC2 SU:0 Bt:3 Ht:0 Mo:BCU". It does not seem to be compatible although I have read everywhere that it should work. Is this maybe antoo old version? Or what can be the reason?...
to 5.) So I used newer version 'cwm-6.0.5.3' and 'twrp-2.7.1.0', as I mentioned, but then these versions do not support older version than KK. E.g. 'CronMod-INT2EXT+_signed.zip'. This is the problem. Any solution?...
Is TLS ment as 'Thread-local storage'?...
Another short request:
a) Video recording with cm11 on Wildfire S works now without any patch. But if I record a video longer than about 5 seconds and I want to watch it directly after having stopped recording (timeframe about 7 seconds) then the camera app crashes. Can you confirm that on Wildfire S? What can be the reason?...
If Olivier's camera patch will help here as well I have not tested yet...
b) Management of Launcher and App screen is somehow circumstancial or not even possible. This is why the option 'Homescreen' is missing in 'Personalization' ('cm-11-20140816-Nightly') although the related screenshots of cm11 in XDA show this option!! E.g. App icons cannot be sorted alphabetically or cannot be manually moved within the screen. Or the home panel is the most left one instead of the middle one. Etc.
Any reason why the option 'Homescreen' was deleted (in XDA cm11 screenshots for Wildfire S still show it!! S. http://forum.xda-developers.com/showthread.php?t=2735775 )?...
c) CM11 OTA update suggests me 'cm-11.0.0-RC9' as the first in the list. Is this really more actual than the installed 'cm-11-20140816-Nightly' (version 11.0-20140816) ?...
d) In this version the Email system app is missing. Why?
Any zip to flash it anywhere? Or do I have to use one of the market?...
e) No warm reboot option available anymore in cm versions?...
Thanks for your help again, Kevin!
Many greetings, Falk
to 5.) I could solve that problem meanwhile by myself. I downloaded a modified version of cwm 6.0.5.3 here:
http://click.xda-developers.com/api...5.0] - Post #52 - XDA Forum&txt=the new build
But I still do not know what was modified! You?...
6.) you forgot the ever present mobile data bug at least for cm9 and cm10. Which no1 evens bothers to mention
Beeefalo said:
6.) you forgot the ever present mobile data bug at least for cm9 and cm10. Which no1 evens bothers to mention
Click to expand...
Click to collapse
Because it does not exist? I never faced any bug like that.
aWFSuser said:
Because it does not exist? I never faced any bug like that.
Click to expand...
Click to collapse
oh, its super present .
It was a "common" problem in cm9, cm10 based roms, at least judging from the various threads dating back to 2013. And as I discovered yesterday its also present in CM11 RC9 for me.
Occurence of the bug is very random and seems to be bound to certain providers which makes it hard to debug/fix i guess.
Sadly, from what I've read "deal with it and toggle airplane mode when you need mobile data" or "install cm7" are the ways to handle this bug.
cheers
Beefalo
Q&A for [ROM][4.4.4][KTU84Q][SlimKat - Hercules][OFFICIAL+Weeklies]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4][KTU84Q][SlimKat - Hercules][OFFICIAL+Weeklies]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
BEEN LOOKING For SO LONG!!
NoSpamDan said:
SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
SlimKat is the project name for SlimRoms based on Android 4.4 and offers the following original features:
The Real Dark Slim
Full system-wide dark interfaces. - If you like it smooth and classy.
Custom Shortcuts. Everywhere.
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - We've got you covered.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticions, etc. - You'll be tapping away to your heart's content.
SlimCenter
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
Camera Features
Trueview, Smart Capture. - Capture life moments with ease.
Important links:
slimroms.net - The official webpage where you will find everything you need to know about SlimRoms.
Slim Downloads - Download the ROM, GApps and other Addons.
Installation instructions - Follow these steps to the letter if you're about to install SlimRoms on your device.
Latest Changelog - Read here if you want information on changes in latest build.
FAQ - The most frequently asked questions with answers.
Kernel Source - The source of your device's kernel.
See Post #2 for Known Issues and Installation Notes.
Get in touch! - Contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Forum
Special thanks to (in no particular order):
The Slim Team
CyanogenMod
prbassplayer
wantowan2
kintwofan
Disclaimer: SlimRoms are not responsible for any damages to your device.
Click to expand...
Click to collapse
helllo,
will this work for mine??
Heres is my Phones info.
SGH-T989
Android Version
2.3.6
Baseband Version
T989UVLDH
Kernel version
2.6.35.11-1209942
Build Number
GINGERBREAD.UVLDH
mono956 said:
helllo,
will this work for mine??
Heres is my Phones info.
SGH-T989
Android Version
2.3.6
Baseband Version
T989UVLDH
Kernel version
2.6.35.11-1209942
Build Number
GINGERBREAD.UVLDH
Click to expand...
Click to collapse
Absolutely should work, however, you have some homework to do in order to ensure success. You will need a new recovery, new radio and might need to jump to ICS first, not sure. One other thing I would recommend is turning on your GPS and getting a GPS lock before rebooting to flash a new radio, recovery and ROM if coming from GingerBread as you are...
Head on over to Vincom's 1-Stop Sticky Thread, which contains information all about the SGH-i727 Skyrocket, and the T-Mobile Dev Thread. The Hercules is almost identical and hardware, and most Skyrocket ROMs should work on both, with maybe one issue of screen orientation (turned 90 degrees).
There are radio links in the OP of my SlimKat Hercules thread.
Read up in those threads, and then find a newer recovery and radio that you need need to proceed.
Thank to Slimrom
I'm very happy to keep my old pal (T989) on working everyday with Slimrom.
I change from CM11 to Slimkat build 7 serveral months agos.
I flashed by zip with CWM, it was working but couldn't reboot by default, dark screen and no response anything. I think it was my fault.
Then I restored and flashed it again with Rom Manager, it's successful.
With mini gapps pack, Rom (build 7) works like a charm. Then I disabled some google services for better RAM and speed (for example Hangout is kinda heavy)
Herein is some point that I think could make it better:
There is no option to change launcher ( Nova launcher by default)
There is no option to change/customize clock widget on LockScreen (DashClock Widget by default)
Recent Apps function: didn't show the latest using app on the list (when my current screen is homescreen).
Recent Apps function: Couldn't access to previous app (Close App error)
Step to reproduce: If you're using App A, then App B, you try to access App A via Recent Apps function. Then error message "Close App" will be display. But luckily I've found my own way to resolve, just change to random App C, then back to App A as usual (a little bit unconvenience but it was not a problem)
Notification couldn't updated by user behavior. For example, I have notification for new message on Viber, then i access Viber to check a new message ( do not touch on Notification ), so this notification will be remained for a long time ( until I touch on it for re-read)
I couln't tested with build 8 due to camera error ( couldn't handle camcorder function, couldn't focus) but I'm really happy with the build 7.
Thank you.
Can't hear or make calls after flashing
Installed the stable Slimkat for t989 I can't hear any dialing sound or anything when somebody calls me :/ back to stock
4xxxxL said:
Installed the stable Slimkat for t989 I can't hear any dialing sound or anything when somebody calls me :/ back to stock
Click to expand...
Click to collapse
Stable version 8? No such issues have been reported. Bugreport?
One Skyrocket user has reported the inability to receive casks in WEEKLY version 8.12.1. He went back to weekly version 8.10 and incoming calls are working. These phones share a lot of source code.
It must be caused by something merged since the 8.12.1 WEEKLY.
Read post 2 in the main thread for how to submit a Slim bugreport to help fix this.
Sent from my OnePlus One BACON using Tapatalk
yep
NoSpamDan said:
Stable version 8? No such issues have been reported. Bugreport?
One Skyrocket user has reported the inability to receive casks in WEEKLY version 8.12.1. He went back to weekly version 8.10 and incoming calls are working. These phones share a lot of source code.
It must be caused by something merged since the 8.12.1 WEEKLY.
Read post 2 for how to submit a Slim bugreport to help fix this.
Sent from my OnePlus One BACON using Tapatalk
Click to expand...
Click to collapse
Yes. 8.0 stable release from the site slim-hercules-4-4-4-build-8-0-official-6919
as for the bug report I panicked since I needed the phone in working state withing an hour so I flashed the stock firmware back so not much help from me now . But yeah I called a phone in the household and phone was making a call its just I couldn't hear the dialing tone and when the second person picked up it was dead silence on my side.
This is not he first time I had this issue previously I tried cyanogenmod 10.2.0 stable and had the same issue out of nowhere after month of working just fine
Thanks for the feedback. Full wipe, including /data wipe or factory reset?
bacsidien94 said:
Herein is some point that I think could make it better:
There is no option to change launcher ( Nova launcher by default)
Click to expand...
Click to collapse
All you have to do is install another launcher, then press the home key and select your preferred one and select "Always"...
There is no option to change/customize clock widget on LockScreen (DashClock Widget by default)
Click to expand...
Click to collapse
You have to allow lock screen widgets, then drag it off the screen and add what you want.
Recent Apps function: didn't show the latest using app on the list (when my current screen is homescreen).
Recent Apps function: Couldn't access to previous app (Close App error)
Step to reproduce: If you're using App A, then App B, you try to access App A via Recent Apps function. Then error message "Close App" will be display. But luckily I've found my own way to resolve, just change to random App C, then back to App A as usual (a little bit unconvenience but it was not a problem)
Click to expand...
Click to collapse
To many possibilities without a bugreport...
Notification couldn't updated by user behavior. For example, I have notification for new message on Viber, then i access Viber to check a new message ( do not touch on Notification ), so this notification will be remained for a long time ( until I touch on it for re-read)
Click to expand...
Click to collapse
What other apps do this? Tapatalk does this for me on CM11S with my OnePlus One even. Probably an app issue.
I couln't tested with build 8 due to camera error ( couldn't handle camcorder function, couldn't focus) but I'm really happy with the build 7.
Click to expand...
Click to collapse
Full wipe. Camera is fine on Build 8.
Everyone, PLEASE, if you have issues, refer to post 2 IN THE MAIN TOPIC for instructions on submitting a Slim bugreport in a new thread on the SlimROMs support forum!
Sent from my OnePlus One BACON using Tapatalk
---------- Post added at 10:15 PM ---------- Previous post was at 10:10 PM ----------
4xxxxL said:
Yes. 8.0 stable release from the site slim-hercules-4-4-4-build-8-0-official-6919
as for the bug report I panicked since I needed the phone in working state withing an hour so I flashed the stock firmware back so not much help from me now . But yeah I called a phone in the household and phone was making a call its just I couldn't hear the dialing tone and when the second person picked up it was dead silence on my side.
This is not he first time I had this issue previously I tried cyanogenmod 10.2.0 stable and had the same issue out of nowhere after month of working just fine
Click to expand...
Click to collapse
No problem. Sounds like a radio issue though or dirty flash.
Sent from my OnePlus One BACON using Tapatalk
I'm using the build by Dan that fixed calling, and I'm getting a huge memory leak problem. The Base System process would start using 100 MB to 200 MB of my RAM, while hogging a part of my CPU at all times. I was watching a video earlier and noticed my CPU usage jumped to 100% and the available RAM started going around 200 MB before the system killed my on-screen system stats display (Cool Tool). I didn't have any other apps running and nothing was being updated at that moment. The video started getting choppy and my phone froze soon after. If you need a log from me, I'll be happy to provide one.
dennis96411 said:
I'm using the build by Dan that fixed calling, and I'm getting a huge memory leak problem. The Base System process would start using 100 MB to 200 MB of my RAM, while hogging a part of my CPU at all times. I was watching a video earlier and noticed my CPU usage jumped to 100% and the available RAM started going around 200 MB before the system killed my on-screen system stats display (Cool Tool). I didn't have any other apps running and nothing was being updated at that moment. The video started getting choppy and my phone froze soon after. If you need a log from me, I'll be happy to provide one.
Click to expand...
Click to collapse
Have you tried the 8.16 weekly from the Slim site, or the test build I posted? Either way, there shouldn't have been any changes (that I made, at least) which would cause such a memory leak...
Clean flash? What GApps version? What app were you using to watch video? YouTube has had some intermittent issues, and I have also heard of recent Google Play Services issues...
If you can start a new thread in the Slim Hercules forum and post a good description with a Slim bugreport, it may be helpful. See Post 2 of the main thread for more details on helping to squash any bugs.
After I installed the rom, the slim gapps, and supersu, my phone did not boot up and did not even show a bootanimation. I tried going into recovery to restore a backup but it would not enter recovery mode. There would just be gentle vibrations and then a black screen. I was using TWRP v2.8.4.0. I would prefer to avoid the hassle of flashing through odin. Please help, thank you.
berZerk7 said:
After I installed the rom, the slim gapps, and supersu, my phone did not boot up and did not even show a bootanimation. I tried going into recovery to restore a backup but it would not enter recovery mode. There would just be gentle vibrations and then a black screen. I was using TWRP v2.8.4.0. I would prefer to avoid the hassle of flashing through odin. Please help, thank you.
Click to expand...
Click to collapse
Can you get to download mode? With phone off, hold both Vol Up & Vol Dn while plugging a computer USB cable in.
Sounds like a bad flash, bad download, recovery issue, or possible h/w problem. The fact that you can't get to recovery suggests a recovery or h/w issue to me.
Does the below work for Recovery mode?
Press and hold Vol Up, Vol Dn and Power for 2 seconds, then release Power but continue holding Vol Up & Vol Dn until recovery loads.
Sent from my OnePlus One BACON using Tapatalk