Video Review: Rearth Ringke Slim Case - Samsung Galaxy Nexus

Hey guys,
I got a video review of the Ringke Slim Case from Rearth. It's a slim well fitted case, it's a hard plastic glossy design and protects your phone from minor knocks and bumps. Feels great in the hand and also includes a screen protector which is very easy to apply and good quality. Watch the full video review below to see more. Also leave your comments below and tell me what you think.
Link to Rearth's website: http://goo.gl/fvzNB
Link to Video on youtube : http://goo.gl/vQdDj

Nice review.
Mine literally came in the mail 1 hour ago and I just put it on. Very nice minimalist case, Noble Black as in your review. After using my Incipio Silicrylic for five weeks, I see my phone is thin again! The Silicrylic was great for grip but it made the phone too damn big and thick, though I loved the Incipio's rubber buttons which were easy to find and use (even moreso than the bare buttons!).
As you mentioned the Slim is a fingerprint magnet but one wipe on your pants and they're gone, in the event you want to show somebody your phone. The port covers are a nice touch, and if you don't like them they can be removed. I haven't tried the screen protector, since I am using the one that came with my Incipio.
Grip is improved very slightly over the bare phone thanks to the side edges which only rise halfway. As I said in another thread, I didn't like the two competitor's cases, the Incipio Feather and Case Mate Barely There. Both of those cases offer slightly better grip with their matte finish but neither cover the corners, instead covering the sides. I believe corner, top and bottom protection is the most useful and the Ringke Slim fits the bill here. I only wish they had a cutout for the three side prongs in case a charger dock becomes available, though I suppose this can be filed or dremelled easily, since there isn't much material in the way.
Great case for everyday use.

ChrisAG said:
Nice review.
Mine literally came in the mail 1 hour ago and I just put it on. Very nice minimalist case, Noble Black as in your review. After using my Incipio Silicrylic for five weeks, I see my phone is thin again! The Silicrylic was great for grip but it made the phone too damn big and thick, though I loved the Incipio's rubber buttons which were easy to find and use (even moreso than the bare buttons!).
As you mentioned the Slim is a fingerprint magnet but one wipe on your pants and they're gone, in the event you want to show somebody your phone. The port covers are a nice touch, and if you don't like them they can be removed. I haven't tried the screen protector, since I am using the one that came with my Incipio.
Grip is improved very slightly over the bare phone thanks to the side edges which only rise halfway. As I said in another thread, I didn't like the two competitor's cases, the Incipio Feather and Case Mate Barely There. Both of those cases offer slightly better grip with their matte finish but neither cover the corners, instead covering the sides. I believe corner, top and bottom protection is the most useful and the Ringke Slim fits the bill here. I only wish they had a cutout for the three side prongs in case a charger dock becomes available, though I suppose this can be filed or dremelled easily, since there isn't much material in the way.
Great case for everyday use.
Click to expand...
Click to collapse
great to hear your thoughts on the case hope your enjoying it

Great review, very detailed. I think this will be my next case.

Related

TPU Case Review for I9100

I just got this case from eBay for around $5 USD and I am so impressed with it I had to write a quick review. I think the name brand is Fusion.
-The fit of the case is just perfect. Very snug.
-The thickness is just enough to protect the camera lens and screen without adding much bulk.
-The sides of the case have a nice texture to make it very easy to grip.
-The TPU material doesn't attract lint and is very easy to slide in and out of your pocket.
-All of the holes match up fine.
-The buttons on the sides of the phone are covered but in my opinion this makes the pressure required just right so you don't accidentally press them.
The only negative at all is that the hole for the headphone jack may be too small for some plugs. The Samsung headphones and my Bose headphones fit just fine though. (Update: My Bose speakers I had to trim a little plastic off of the audio cable but it fits fine now.)
Here is the eBay link if anybody wants one. This guy shipped one to me in 2 days in the US.
http://cgi.ebay.com/Clear-Fusion-Samsung-Galaxy-S2-i9100-TPU-COVER-CASE-/260780906673?pt=PDA_Accessories&hash=item3cb7c0d8b1
If you're willing to wait a few days more, you can get them for 2,5$ in Dealextreme.
I have exactly the same one, purchased for £2.95 off ebay in the UK, and I would agree with all the points outlined above.
bought two of them from Dealextreme, but in black color, best TPU
Do they make them in matte black?
I ordered a similar one from eBay on the 14th, and it arrived today. Fits pretty well and leaves a bit of a bumper around the display, adding a bit of protection.
bmstrong said:
Do they make them in matte black?
Click to expand...
Click to collapse
I believe I saw a matte black on Dealextreme. Most of the black ones I've seen are part matte, part glossy.
http://www.amazon.co.uk/SAMSUNG-GALAXY-SCREEN-PROTECTOR-ACCESSORIES/dp/B004WO6ISI/ref=sr_1_23?s=electronics&ie=UTF8&qid=1306245039&sr=1-23
The thickness is just enough to protect the camera lens and screen without adding much bulk.
Click to expand...
Click to collapse
Hard to tell from the image, but isnt that simply a hole in the case where they camera lense is, so offers no protection for the lens at all??
Its an impossible task trying to find a case that offers protection for the camera.. they are so hi spec and good quality these days, the last thing you want is muck or scratches on the optics.. surely a case designer can be innovative enough to design some sort of sliding cover....
I purchased the Black one as well. However, the glossy part scratches too easily. Handle with care.
Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.
Artius89 said:
Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.
Click to expand...
Click to collapse
It's true, that was my experience with this TPU case as well. Dust would pile up on the edges of the screen and under the TPU lining. I'd have to constantly take off the TPU case and wipe the screen to keep my SGS2 nice and pretty. With the official Samsung vent case i can simply wipe the screen clean in one go without taking off the case. Sure, the official case offers less protection, but it also preserves the form and weight of the phone quite well, whereas the TPU case adds significant weight and thickness to the phone in comparison.
I just got a few of these delivered from buyaccess. Delivered in a week and they fit like a glove. Nice ridge around the screen so it won't scratch if you put it face down and extra grip on the sides.
€2 each and free shipping you cannot go wrong. Link to the sellar if anybody wants it.
http://myworld.ebay.ie/buyaccess/?_trksid=p4340.l2559
i am using nillkin tpu case ,absolutely good awesome。I was driving motorbike in raining day.made my hand wet and glutinous 。then using my phone,that is feeling good。not like some case make your hand oily
http://www.ebay.co.uk/itm/150635443...43813&_sacat=See-All-Categories&_fvi=1&_rdc=1

[REVIEW][GS2 T989] Diztronic Matte Back Black *Rev 2* TPU Case

Diztronic Samsung Galaxy S2 T989 Matte Back Black *Rev 2* TPU Case Review
I have had this case for about a month now and I am writing this review as there doesn't appear to be any particular review of the case for our phone. *to view a larger image just click on the thumbnail*
Delivery/Packaging |9/10| & Pricing |8/10| :
I ordered the case from the Diztronic website so it was delivered from their main facilities. I live outside of the US so I had to choose the "USPS First Class Mail" method which was $2.50 CDN. The package arrived in my mail box close to 2 weeks, which was a longer wait than I hoped for but it was noted that international shipping would take 7-30 days. The package itself came in a grey plastic envelope with the shipping information labelled on it. Inside the package was the case wrapped in a clear plastic with the logo label and a cut piece of cardboard that was placed to help retain the shape of the envelope. When taking the case out of the plastic, there is an image of the phone printed on a piece of cardboard within the case to show what the case will look like on the phone. The packaging the case came in was more than secure enough to provide protection when being shipped (there were no tears or faults in the packaging at all).
The pricing and availability of the case will vary at the time you read this. Although, the cost for the case itself was a decent $10 for what you get, by far not the most affordable however. I used the discount code "XDA" to get an extra $0.99 off the order which was convenient. It would have been nice if they included a screen protector like they do with some of the other phone cases they offer.
Installation & Fit |10/10| :
Putting the T989 in to the case is extremely easy since it's a one piece, TPU style case, so there are no tools or attachments needed. My approach in putting on the case was by starting off with placing the top of the phone (where the headphone jack is) in the case since the top of the case has 'lip' that goes slightly over the top bezel compared to the bottom. Then I just pushed in the rest of the phone in the case making sure the sides of the case did not catch the buttons, which was not a problem at all, right until the bottom of the phone was securely in place.
The case itself is extremely slim and the fit is almost close to perfect, every side of the case is snug to the phone, however, note that I am using the case on top of the body skin I reviewed here. So for anyone who was wondering, yes, this case will work with a body skin applied on the phone. The case is so firm in fact that even the left and right sides of the case do not move as easily when sliding your fingers towards them moving outwards , however, this may change in time... I just haven't experienced it as of yet.
Build Quality |10/10| :
This particular case has a very premium feel, there is a certain weight added to the phone with the case on. It also may have to due with the matte back option I chose for the case. The feel of the matte texture finish is almost identical to the feel of the Razer gaming mouse I have (if you have used a Razer mouse, you would understand what I mean). It has a very paper-like characteristic yet is soft to touch. The matte finish is carried from the outside of the phone to the inside as well which adds to the overall quality of the case (it is also provides a softer surface for the phone compared to the raw plastic). The benefits of having the matte finish is that it is less prone to fingerprints, the downside is that if the matte part gets scratched it will be very noticeable. The matte finish is smooth making it easy to take the phone out of the pocket.
I'd like to mention however, the matte finish is not applied to the outer border/rim of the case as that part is left glossy. It appears as if the case was made with two pieces which may be the instance since the separation between the glossy/matte finish is symmetrical around the circumference of the case. I believe this was done because it is the area that would get worn out the quickest and it probably was easier to manufacture that way. In my opinion, I think the glossy rim for the case was a great idea, it definitely looks aesthetically better for the whole front of the phone. Also, the glossy finish offers a better grip to the case, since the matte finish may be too smooth to grip at times.
Now, when it comes to the cut-outs of the case, they are placed accordingly for every necessary part of the phone. The cutouts for the power button/volume-rocker is perfectly placed and provides a substantial amount of room which provide easy access for any finger size. The cutouts for the headphone jack and micro-USB port are evenly spaced out which leaves enough room for anything that you would like to connect. The headphone jack of my Shure earbuds which is somewhat wide, fit without a problem, at the same time the stock USB cable that came with the phone fits just as expected with the case on (I have provided pictures above with the cables attached below) . Regarding the USB cut-out it was noted that in revision 2 of the case they have enlarged the cutout to leave room for the bottom microphone (I have not experienced any call echo with the case on, even on the stock T989 ROM). The cutout for the top microphone is also precisely placed, there are no issues.
The back cutouts for the case are just as accurate as the cutouts on the side of the case. The camera cut-out does not obstruct the lens of the camera or the LED flash at all. I particularly like how close the cut-out for the rear speaker is, it's nicely placed at the same time it does not reduce the volume produced from the speaker. I'd also like to mention that the case somewhat lifts up the rear of the phone around the speaker area which lets some sound still leak out when the back of the phone is faced down. Lastly, for anyone who is wondering about the reception quality when using this case, I have found no issues during use which is expected since TPU isn't a material that interferes with radio signals.
Protection Quality |8/10| :
The most important part of any case is the protection it offers and this case in my opinion provides more than satisfactory protection for day to day use. Due to its slimness it may not have the drop protection that cases like the Otterbox offer, yet, the TPU material used is particularly good at protecting the phone from average height drops such as from a computer table to stomach height. The case is thick enough to protect the camera area as it lifts the glass part off the surface, this also applies to the front glass of the phone as the rim of the case provides about 1 mm of clearance when setting the phone down on it's front. The rim of the case is formed perfectly over the edge of the front right before the glass, so if you have a screen protector it will not lifted/bubble up.As for scratch protection goes, the case definitely prevents scratches to the back housing of the phone. The disadvantage with this case is that since there are cut-outs for the buttons, dust/sand particles can enter sides of the case which can cause scratches to the bezel of the phone (which is the major reason I bought a body skin to be used right underneath the case). If you are worried about scratches on the phone, the combination of the body skin with this case offers amazing scratch protection if you are willing to spend the money for it.
Overall |9/10| :
If you are looking for a sleek looking slim case to protect your T989, the Diztronic TPU case is definitely a great option! The build quality of this case is notably impressive and there's no questioning to why this case is somewhat pricey compared to the TPU alternatives on Ebay. You definitely get a premium case, particularly with its Matte back finish. As for protection goes, the case offers the best balance between protection and keeping the slim profile of the T989, the TPU qualities with this case is more than enough in protecting your phone from everyday drops. Overall, the Diztronic Matte Back Black *Rev 2* TPU case is definitely a product I recommend for any GS2 T989 user, there are enough noteworthy features that this case offers for you to get one if looking for a case.
I know the review is long, please read what's written under "Overall" if you do not want to read everything or just don't read it at all, lol. Hope this review will be of some use to people. Cheers!
I can agree with everything said here about this case. It's really nice and extremely comfortable! It's the first case I got a while back and it's the last one I'll need.
Great, authentic review
I also have this case and I agree with everything said here. It is a really good case.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
I bought about three cases before this'd one and love it!! Great review and well said I love mine
Sent from my Nexus 7 using XDA Premium HD app
Thanks for this. Diztronic has my heart when it comes to protecting my phone.
Didn't know how it would look on a black S2 though until now. So thank you again.
Sent from my SGH-T989 using Tapatalk 2
would you guys prefer the d30 case or this one?
mycars12 said:
would you guys prefer the d30 case or this one?
Click to expand...
Click to collapse
I've been running d30 for about a year and 1 month and the case isn't dirty or yellow (it's white) and it still stands today with the many falls
Sent from my 4.2.1 xLoud Paranoid Grouper with Motley Kernel
I have the same case and its the best case I have ever owned. I drop my phone quite a bit and phone/case still look perfect. Fits great on device, and has a nice non slippery feel that does not attract dust. My wife has the pink version and its the same quality but a little slicker, she really likes it too.
diztronic
I have the matte black diz rev 2. I bought my t989 at tmobile store and wanted titanium but was told they aren't made anymore. Now this was from corp office. So I got white. The diz covers it nice black with a little white showing fitting for ICS . I really don't care if it scratches it. I May buy New housing anyway!

[CASE] Acase Superleggera Pro vs Spigen Slim Armor

Acase Superleggera Pro
vs
Spigen Slim Armor
For Nexus 5​
Prologue:
Going to have a good ol' fashion case off here for the Nexus 5. At first I was excited, thinking that I would actually take measurements and pictures, but then I remembered that I'm too lazy for that kind of stuff. Therefore, this will only be a personal comparison with color-codie goodness. A little warning that already I'm biased towards Acase because I've used a superleggera pro for my iPhone 4s (never going back to Apple) and after two years of dropping, that phone looks like its brand new (with loads of finger prints :good: ). Besides the protection, I also just love the smooth feel of matte...
Summary:
Both cases have their advantages, but personally I went with Acase.
Main Points:
If you didn't know, both of these cases are supposedly dual-layered cases. This means that these cases have two pieces to their design. Whether that actually adds to the protection and shock absorption or not, I have no idea. What I do know is that psychologically, I feel like my phone has better protection.
Superleggera Pro:
Silicone Case with a Poly-carbonate shell
Nice smooth feel but super slippery.
Example: Case face down, back up. Try to slide your hand against the back. Barely any friction or resistance when sliding my hand across.
Good enough lift in the back to protect the camera but no extra corner stands like the Slim Armor for airflow. Great lift in the front as well.
[*]Clicky feedback when pressing volume and power buttons. You can press the power button without accidently pressing the volume buttons too.
(Note: See Slim Armor main points for details)
A little Acase branding on the bottom of the back of the case.
Slim Armor:
Hard TPU with a Poly-carbonate Shell
Nice smooth feel, making it a little slippery but not too slippery.
Example: Case face down, back up. Try to slide your hand against the back. I felt resistance from my hand sticking to the case.
[*]Nice lift in the back for airflow and nice lift in the front to protect the screen.
[*]Buttons lose their clicky feedback. Big problem for me. Also had some occasional issues with locking the screen since the amount of force needed to press the power button makes you also press the volume buttons if you have your finger there.
Spigen branding on the lower part of the back of the case and on the right side. Looks cooler than the Acase branding but who cares really.
Review:
To me. dual-layer means two different layers put together to make one great case. With the Slim Armor, I was expecting silicone plus the poly-carbonate like the Acase I was already used to. As far as silicon vs hard tpu for the base part of the case, I haven't read or seen anything that sets a clear winner.
With the positioning of the second layer of poly-carbonate Acase wins here. I mean when I drop my phone it hits the corners or at least near the corners more often than it lands perfectly on its side. With the Slim Armor, the hard shell poly-carbonate pretty much just covers the side and the corners are covered only by the hard tpu. Spigen claims that there are "air-pockets" in those corners in their advertising but I don't know how effective these "air-pockets" are. Anyway, If I wanted hard tpu to protect my corners, I'd just get a hard tpu case. The Acase has all around dual-layering except for the buttons and cut-outs like the headphone slot. With the Acase I feel I'm getting the true dual-layered protection I'm looking for where both the hard shell and the silicone cover the corners for that added and padded protection.
Button feedback is another pet-peeve/preference for me. Acase, since its silicone, has perfect feedback. Easy to press down and you feel and hear that click. Spigen, no feedback...at all. Thanks to hard tpu, its hard to press your buttons down. Now I'm not saying that its impossible to press the button down but the resistance of hard tpu not only kills your clicky feedback but it also can make you squeeze your phone hard enough to press the volume at the same time as the power button.
Both cases pick up on finger prints pretty easily. The Acase can also pick up on dust, lint, etc with its silicone. Personally, I can put up with this for a better feeling case. After a little back and forth case swapping, I realized that the Acase has more lift than the Slim armor in the front Due to the thickness of the silicone at that point. The case also wraps around the edges more (something I liked) without making my screen protector peel up at the edges.
Both cases have plenty of space for the micro-usb and speaker cut-outs. However, with most cases there are issues with the headphone port. My tiny apple headphone jacks fit perfectly for both cases, however my bulky (1 cm diameter) speaker jack only fit with the Acase. Since the Acase uses stretchy silicone, I could push the headphone in at the expense of stretching the silicone a little. With the Slim Armor, there was no way to get it in without taking off the case at the top. (I will note that its easier to take the top part of the Slim Armor off than it is to take the Superleggera Pro)
Width and length are the same for both cases, however the Acase is slightly thicker. For me, this means more protection at the cost of a barely noticeable additional thickness. Both cases feel great in the hand, I just felt like the Superleggera Pro had more pro's and a better feel than the Slim Armor.
Edit:
Just got a chance to test the Acase with a wireless charger (CHOETECH Stadium) and it works! The charger isn't that special, so I'm going to assume that most chargers should work with the Acase. I still recommend you conduct your own research on wireless chargers and compare it to the CHOETECH so you can confirm that whatever you buy will work as well. I'm not supporting CHOETECH in any way, just stating the charger I used to test the ability to wirelessly charge through the Acase.
Well said!
I also own both cases, and will vouch for everything ximaginex said. Personally, I feel the Acase provides a better level of protection than the Slim Armor because it has both silicone & polycarbonate protecting the corners vs. just TPU. The Acase is thicker, but feels better in your hands and the button response feels like using the phone bare.
Pro Tip: If you wish to remove the branding on the Acase, borrow a cotton ball and a dab of nail polish remover from your girlfriend. Lightly rub the lettering and it should come right off.
Kennypete said:
Well said!
I also own both cases, and will vouch for everything ximaginex said. Personally, I feel the Acase provides a better level of protection than the Slim Armor because it has both silicone & polycarbonate protecting the corners vs. just TPU. The Acase is thicker, but feels better in your hands and the button response feels like using the phone bare.
Pro Tip: If you wish to remove the branding on the Acase, borrow a cotton ball and a dab of nail polish remover from your girlfriend. Lightly rub the lettering and it should come right off.
Click to expand...
Click to collapse
The had no idea about the removal technique, thanks. Not sure if I want to do it or not though. The branding is like a classy tramp stamp for my phone, but having it smooth and clean might be pretty nice too.
Sent from my Nexus 5
So can you guys post pictures?
Sent from my Nexus 5 using Tapatalk
Clicky Feedback on spigen
I've got 2 different revisions of the spigen slim armor. as you can see the only difference is the way the pads for the keys are attached. The one with only one connection on the top side have a very big ce "clicky" feedback, the other one is very difficult to press. So you could try to cut the bottom connection and see if it gets better.
I also got the Acase case. One thing that bothers me is that the inner silicon layer is too soft, I wish it was tpu instead. The bottom lift of the phone is not reinforced high enough by the hard plastic shell, making the inner layer too loose.
I'd love to see an owner's picture of the Acase. ☺
derju said:
I've got 2 different revisions of the spigen slim armor. as you can see the only difference is the way the pads for the keys are attached. The one with only one connection on the top side have a very big ce "clicky" feedback, the other one is very difficult to press. So you could try to cut the bottom connection and see if it gets better.
Click to expand...
Click to collapse
Thanks for pointing that this out. I'll consider trying this and report back if it works.
Can someone post a picture of the acase? Considering getting one
Sent from my Nexus 5 using Tapatalk
[/URL][/IMG] Here's a pic. I'll try to upload some more, with the nexus 5 in it.
Great review... But holy hell that was a lot of Comic Sans! That font always make me think of this picture.
Just got my Acase today and it is much thicker than I imagined it would be... But the bulkiness is kind of nice and the phone still feels great in hand so far. I ordered mine from CTCstore on Amazon and it was listed as Slim Superleggera PRO but my packaging only says Superleggera PRO... I emailed the vendor for clarification but am wondering if the op is referencing the slim version or regular, or if they are actually the sane thing.
Here's a picture of mine.
http://i.imgur.com/JnMmuwm.jpg
http://i.imgur.com/QjUjN3M.jpg
That white Superleggera case looks great! Thanks for posting the pictures. :thumbup:
ktamondo said:
Here's a pic. I'll try to upload some more, with the nexus 5 in it.
Click to expand...
Click to collapse
Broken picture.
GHOSTIVVI said:
Can someone post a picture of the acase? Considering getting one
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Have you seen the amazon pictures?
To me I thought that the spigen slim armor felt like a dollar store product. Its fits OK but is just hard and cheap feeling. The volume buttons were sorta hard to push. I absolutely love my acase.
Sent from my Nexus 5 using Tapatalk
Fixed the broken picture.
Terrible. The only place that carries this is Amazon.com and they won't ship to Canada.
Brutal. Just brutal.
Sent from my Nexus 5 using Tapatalk
derju said:
I've got 2 different revisions of the spigen slim armor. as you can see the only difference is the way the pads for the keys are attached. The one with only one connection on the top side have a very big ce "clicky" feedback, the other one is very difficult to press. So you could try to cut the bottom connection and see if it gets better.
Click to expand...
Click to collapse
Is the power button the same design (only connected on one side) on the new revision? Spigen allegedly sent me the revised TPU but my buttons look the same as the original design. I actually cannot tell the difference between my original one and the new one. I think Spigen might have messed up and sent me the original revision as a replacement.
To keep this on topic, I also have both cases as well. I actually liked the functionality of the Superleggera best (clicky buttons, corner coverage, etc) but to me the look and quality of materials of the spigen were significantly better than the superleggera. See I would have said the superleggera was the generic cheepo case and the spigen was the high end case. Just shows how widely peoples opinions can vary on two identical items.
Waiting for more pics from you!
---------- Post added at 12:01 PM ---------- Previous post was at 11:57 AM ----------
ktamondo said:
[/URL][/IMG] Here's a pic. I'll try to upload some more, with the nexus 5 in it.
Click to expand...
Click to collapse
Waiting for more pics of this red case!

amCase Ultra Slim-Fit Case Review + Pictures

amCase Ultra Slim-Fit Case
There has been a lot of slim cases like the Rearth Ringke slim, spigen and others. The amCASE ultra slim is a bit different than the others.
First, its thin alright. Fits well and not much wiggle room when in the case. The back has a nice soft matte grip finish, No corner was sharp but a nice smooth rounding on all sides/corners. There is some lift ont he bezel around the phone so it lifts the phone just a bit to prevent scraching the glass on the front when setting it face down on a table.
The amCase differes in that there is no bezel by the buttons on the phone. While it makes it have even less protection than other slim cases; it makes it a lot easier to take it off and on. The Rearth slim I have has just a good fit but the buttons would always get caught when taking it off or on.
It doesn't add much protection on the bottom or sides which is nice to have complete free access to all the ports/seakers.
This is definitely not a case if you're clumsy with your phone but there to prevent the small drops or scratches. Very minimalistic and good construction witht he added bonus of the easiest to take on and off of the phone than other slim cases
This is my kind of case. I presently have the rearth slim. It's the only case for me, so far. This looks like a great option for those of us who like the more professional look vs the bling, bulky, rubber, two piece, colored type cases. I'll have to try one. Is the logo (boo hiss btw) raised or etched in any way or is it just printed?
Nexus5
almost bought this case, but reviewers had issues with the matte finish coming off after a week.
Please update your review after couple weeks on the fit and finish.
thanks
jbdan said:
This is my kind of case. I presently have the rearth slim. It's the only case for me, so far. This looks like a great option for those of us who like the more professional look vs the bling, bulky, rubber, two piece, colored type cases. I'll have to try one. Is the logo (boo hiss btw) raised or etched in any way or is it just printed?
Nexus5
Click to expand...
Click to collapse
just printed on. I'm sure it'll start rubbing off soon enough
I only used the amcase on my nexus 4. The first one I had was amazing. The second started peeling almost immediately.
I just received my new one for the nexus 5. It has a slippery soft feel that is really disappointing.
Sent from my Nexus 5 using Tapatalk
This guy has a video review of it and shows the case peeling pretty badly at all 4 corners.
http://www.youtube.com/watch?v=O8CB7i_ExSA

Case reviews: Rhinoshield CrashGuard & SolidSuit, Zeking Ultra Slim, Crave Slim Guard

Case reviews: Rhinoshield CrashGuard & SolidSuit, Zeking Ultra Slim, Crave Slim Guard
i've used a number of cases that you can easily purchase from amazon before including the spigen tough armor, spigen neo hybrid, spigen crystal shell, ringke fusion and the rhinoshield crashguard. I think the 2 most important aspects of a good phone case is reinforced corner protection and elevated front edge to protect the screen. When I got the pixel 2 XL, I started looking for a slim yet protective case and I ended up trying the 4 cases below. I used each case about 1-2 weeks and thought I'd share my thoughts. I did receive the Rhinoshield cases from the company for free but they are not involved with my write up in any way, shape or form.
The photos attached are in accordance to the order of which the cases are reviewed.
Rhinoshield CrashGuard bumper case:
This was my favorite case when I had my galaxy s7 and when I moved on to the LG G5 then G6, I was disappointed to find out that they don't make the CrashGuard for them.
From my experience using this case with the galaxy s7 (which I had for about a year before it was stolen...), this case simply works. I am not the best when it comes to handling my phone therefore it gets dropped a lot; this case really does the job well when it comes to impact protection while being minimalistic. During the past 2 weeks with the case, I've dropped my pixel 2 a few times from different heights, mostly from standing height and some from when I get out of the car and the case has been effective. According to Rhinoshield, their cases have a 11.5 ft impact resistance rating which supposedly far exceeds the " US MILITARY DROP TEST STANDARD".
Many others have commented on how slippery this case is. Well, it is and that's because Rhinoshield now coats the cases to make them more stain resistant. For me, personally, I don't mind as I find it easier to slide in and out of my pockets.
Some physical changes I've noticed is that the case fits A LOT more snug to the point where it is quite difficult for me to take the phone out of the case. That's an inconvenience for me as I fly a drone here and there and in order for the phone to fit into the remote controller I have to take the case off. Now I may have to buy a separate phone holder for the remote controller. Another change that's worth pointing out is that in my old s7 case, the raised lip on the back of the case was more pronounced at the corners and the top and bottom edges. This gave me more of a piece of mind since it is a bumper case and the back of the phone is exposed. However, it seems like they have eliminated that from their design of the new cases and I wish they kept that. Lastly, now you can change up the color of the power button but the colored buttons have to be purchased separately. The power button is very responsive but the volume rocker you'd have to press a little bit harder.
Other non-noticeable changes they've made since I had their case for the s7 is they now use a different material (fancy name 'ShockSpread Material') for their cases which is suppose to be lighter, thinner but just as protective and durable.
The case is friendly with their screen protectors, as well with the Sparin TPU screen protector that I got from amazon. In terms of skin, it will not work with the Dbrand precision fit skin but fine with standard fit. However, it will leave an indent on the standard fit skin as shown in photos.
Lastly, if you happen to have a Feiyu tech SPG-c gimbal, with the heaviest counterweights the phone with this case just barely works.
Rhinoshield SolidSuit
Overall, very similar to the CrashGuard bumper case.
I'll highlight the differences:
- compatible with the RhinoShield add-on lens
- of course, heavier and bulkier (heaviest of the 4)
- feels very solid because of the overall construction, as well the back is protected
- most of the finishing is the same as the CrashGuard, however the back of mine has the carbon fiber finishing which I guess made it less slippery
- volume rocker is much more responsive than the CrashGuard
- did not work at all with the Feiyu tech SPG-c gimbal
Zeking ultra slim TPU case from amazon canada
In my opinion, very good case. For less than $10, you get padded corner protection plus raised front edge without much added bulkiness; this is just as good as cases such as ones from Spigen or Ringke but for 1/3 or 1/2 the price.
It is made of TPU and I haven't had the case long enough to speak about yellow-ing, but the TPU feels decent not cheap. On the inside of the back of the case, there are these microdots and I can't understand their purpose. You can actually feel them when you brush you finger across. The side buttons are responsive, clicky. A really thoughtful and unique design is that along the sides of the case the TPU's texture is different and it allows for better grip (almost like there's a very smooth sandpaper strip). The advantage of this case in comparison to the two Rhinoshield cases above is that it does feel slimmer in hand.
When it comes to impact protection, it doesn't have that "over 11 ft of impact protection" that's marketed for the Rhinoshield cases, however the few times I dropped the phone in this case it was completely fine.
I did try to use this case with the Dbrand 'precise fit' skin. It will not work well with the skin if you have the tendency to take your phone in and out of the case. As i took my phone out, it lifted the skin that goes around the the corner on the side of the phone. On the other hand, the 'standard fit' skin did just fine. In terms of screen protectors, it is compatible with the Sparin TPU screen protector as well as the protectors from Rhinoshield.
Similar to the Rhinoshield CrashGuard, this barely worked with my Feiyu Tech SPG-c gimbal.
Crave Slim Guard from amazon canada
This case is very similar to the Ringke Fusion in a sense that both have the TPU bumper that goes around the case, and the clear polycarbonate back. This case, however, has a very pronounced elevated front lip to the point where it almost feels like the phone is sunken in inside the case. It's very good if you're looking for extra raised front protection, however when you're swiping left or right on the screen you will feel the edge more so than the other cases. It may help if the company just round off the raised edges a little bit more. A thoughtful part of their design is that they raised the back corners a tiny bit; my guess is they are there to raise the back a little bit so when you sit the phone on a flat surface it doesn't scratch up the polycarbonate back. All the buttons super responsive and clicky; probably the best buttons of the 4 cases. The phone does feel pretty slim in this case and I think even slimmer than the Zeking TPU case. I don't remember dropping my phone while using this case, but based on its construction it should do just as good as the Ringke Fusion case but definitely not as good as the other 3 cases above.
Overall I think this case is just as good as the Ringke Fusion if not better protection because of the pronounced elevated front edge. Keep in mind, from my experience using these cases with a polycarbonate back they will get scratched up over time and you will see more finger print smudges.
When it comes to compatibility with skin and screen protectors, it is the same as above.
Similar to the Rhinoshield CrashGuard and ZeKing ultra slim, this barely worked with the Feiyu Tech SPG-c gimbal.
Long review but hope this helps. I will start another post for my screen protectors review as well as a review of the add-on lens from RhinoShield.
Nice reviews! Kudos
My fav is the Zeking ultra slim TPU!
Not related to the topic, but can you tell me where you get the yellow skin for your Pixel? I'm interested in that yellow lock button.
allweknowisa said:
Not related to the topic, but can you tell me where you get the yellow skin for your Pixel? I'm interested in that yellow lock button.
Click to expand...
Click to collapse
from DBrand
see my review here
https://forum.xda-developers.com/pi...and-skins-review-hyperblack-titanium-t3780607
The yellow power button is from rhinoshield. you can purchase the colored buttons separately on their site and it's compatible with their cases.
Thanks for your detailed review. One thing is that I tried Ringke Fusion and Crave Slim Guard; I think Ringke Fusion does provide a bit more of FRONT lip, doesn't it?
drvalianto said:
Thanks for your detailed review. One thing is that I tried Ringke Fusion and Crave Slim Guard; I think Ringke Fusion does provide a bit more of FRONT lip, doesn't it?
Click to expand...
Click to collapse
I don't have the exact measurements and my experience with the ringke fusion is with the lg g6 case. To me it seems like the crave slim guard has a slightly more raised front lip than the ringke fusion but then i am not comparing apple to apple.
Update:
I stuck with my RhinoShield Crashguard and it has protected my phone... extremely well. I have lost count how many times I've dropped it face down, down the stairs, and more.... yep, a bit clumsy with phones.
I stayed at this villa in Bali, and it literally tumbled down these stairs from top to bottom..and my phone remains immaculate. (except when i was in Bali I decided to use it briefly without the case..and of course I dropped it..... )
Included photos of the case with the worst scratches and also...the staircase where it literally bounced its way down...

Categories

Resources