Related
I'm not sure if this is the right place to ask this, please excuse my ignorant.
I have an EVO that won't charge. I've read a lot from Google search results that this is a common problem among many users. However, the port seems to be working, because my computer will recognize the phone and storage when I plug it in. The charge led will come on, and the indicator on the phone will say that it's charging, but the phone is actually only discharging while plugged in. Eventually the led will turn itself off, and the phone stops telling me that it's charging when the battery is down to its last drop.
I hope that someone with similar problem can help me with fixing this, or if anyone cause tell me if it's possible to fix? I want to send it in to HTC since I think the phone is under warranty, even if I don't have the protection plan from Sprint? The problem is the touch glass is cracks, and I don't know if they'll fix the USB port without saying that I broke it and won't cover that under the warranty. I want to buy a new screen and replace the broken one, but if I open up the phone it would void the warranty as well...
So I'm stuck with a discharging phone, cracked screen, and having to carry around 3 separate batteries everyday, and I have no idea what step I need to take.
Please help?
Have you tried plugging it into another charger? It may just be the charger that is screwed up. If this behavior pattern is consistent across multiple chargers then you may want to talk to Sprint to see what options you have.
Concordium said:
Have you tried plugging it into another charger? It may just be the charger that is screwed up. If this behavior pattern is consistent across multiple chargers then you may want to talk to Sprint to see what options you have.
Click to expand...
Click to collapse
Doubt it's the charger as it was stated that the computer connection works - should get a bit of a charge from that. I agree that a Sprint visit is due.
Just went through this myself! Would plug my phone in before bed and wake up with the phone at 2% or so. Thought it was the battery- so i took my battery to have the sprint store check it, they did say it was bad. So i bought 2 batteries off ebay.
I got the batteries and still had the issue. So then I took my phone to the sprint store and had them check the micro-usb port. They said it was fine and they cleaned it out cause dirt/dust was in it. Still had the problem..
So I bought a new micro-usb cable of monoprice (still using the same wall charger) , and that solved the issue! Had a bad cable. Now my phone charges super quickly in matter of 4hrs.
It could still be the charger. The USB cable sends data and power through different pins. So a bad cable could still transfer data while not pushing a charge.
Sent from my PC36100
It's gotta be the port happen to mine and I was able to get it fix as long as the port was still attached to the motherboard, if its not attached then have to go thru the insurance.
EVO with Identity Crisis
I was able to connect to my computer and send data just fine with the old (broken) usb cable.
I've tried three different cable and a car charger, same result; they all say the phone is charging but it only gets discharged. USB/storage connection works. Last time the Sprint store said the battery is faulty, but I have 3 different ones and neither will get charged with the phone plugged in, an external charger will work.
kzn said:
I've tried three different cable and a car charger, same result; they all say the phone is charging but it only gets discharged. USB/storage connection works. Last time the Sprint store said the battery is faulty, but I have 3 different ones and neither will get charged with the phone plugged in, an external charger will work.
Click to expand...
Click to collapse
Definitely sounds like a port issue then. If you return to Sprint and review what you've done, as well as the result of your previous trip, then they should be able to take care of you. If they try to tell you it's the battery again just stand your ground. Good luck.
I had a similar issue. I tried everything. It wasn't until I found my HTC cable that it started charging again. I work in IT and tried cables from everything I could get my hands on (blackberries, external drives etc. ) The cable that came with my phone was the only thing that worked.
Sent from my PC36100 using XDA App
Had same issue except couldnt sync. Eventually couldnt charge at all...Had port replaced ans can charge all day but no sync still....sucks but at least I can charge.
mexigga said:
Had same issue except couldnt sync. Eventually couldnt charge at all...Had port replaced ans can charge all day but no sync still....sucks but at least I can charge.
Click to expand...
Click to collapse
If you replaced the port yourself, I would love to know how to do it!
Took the phone back to Sprint and they said there's nothing they can do. I don't have the protection plan so I couldn't even pay the $100 to get it replaced (although I probably wouldn't as I can upgrade my contract and get a new phone soon). They also told me that HTC wouldn't cover it under their warranty because the screen is cracked and they will blame that on me for misused. I tried to check the warranty policy on HTC, but the page is not even available. Does anyone have experience dealing with HTC? I bought a replacement screen, I'd like to replace the screen but don't want to open up the phone if there's a chance HTC will fix the USB port...
HTC EVO 4G Won't - Stopped Charging Battery Issue
Hey Guys,
Two nights ago I woke up to an EVO that was plugged in with a Cellet
extractable charging cord, as it is just about every night. But, the phone was
still showing that it was charging the battery, animation with lighting bolt,
at only 50% charged after about 6.5 hours of charging. Hmmm....
The latter after trying to charge in the coffee shop first with Cellet chord in the
wall then a portable 3500mah solar portable charger; the phone not seeming to
charge at or past 50% charged.
My EVO is rooted but still with the stock ROM and the gingerbread 2.3.3 OTA
update. The battery is a Seido 1750mah and SetCPU is at 245 - 998mhz. The
phone has only been rooted for a few weeks, but I don't see where rooting
would interfere with battery charging.
I've pulled the battery out, several times to no avail. Switched back to the
stock battery, same results. However, if the battery is less than 50% full
the phone will charge the battery to 25% or 50%, weird. If the battery is
at 75% or more full, the phone will top off the charge to a green LED at 100%,
sometimes. Sometimes it won't fully charge the battery. Weird.
I read different posts regarding poor USB chords so I pulled out the stock
micro USB to USB, a charge only chord I figured, and am trying to top
off the Seido battery, which it seems to be doing as it's now full green but
still charging as the animation shows the bolt in the battery and the LED
is still orange.
If put the batteries in the Seido wall charger, the thing the size of a deck
of cards, both batteries fully charge.
I also use Screen Off by Iwashi Soft. That app has worked pretty well with just
a little funkiness now and then. However, while plugged in, I hit the power
button, instead of the home button to turn on the home screen. The phone
wouldn't open to any screen nor would turn on or off. So I ended up
yanking the battery to turn it off then reinstalled battery and turned phone back
on. I don't know if that had any effect on the charging issue, but I took
the icon off the homescreen and am using the power button only, for now.
I don't think both batteries are faulty at the same time at this point. I
don't know if the screen off app caused some wake issue that interferes with
charging the battery.
I do know that when plugging in the phone to charge there's a bit of clunkiness
initially as the phone locks for a second before allowing use for screen or app
and that's always been the case since the gb update. Also, the LED doesn't
always turn green from amber when fully charged with the screen off until
you reboot or use the phone in some way while still plugged in. So there is
some kind of wake issue in the stock ROM. But the latter has never stopped
the battery from charging.
I do know that Plume, the twitter app, started acting clunky with not updating
in the background unless I opened the app at least once after a reboot. But
I don't know if the latter is a wake issue.
Battery still seems normal. Heavy normal use, lots of SMS, tweets, Pulse reading,
Dolphin browsing, I'll kill 50% or more of the battery in 4+ hours. Otherwise, the
phone mostly in standby with periodic email and twitter reads, the battery lasts
all day or more than 24 hours. But the latter rarely happens anymore because I'm
a user.
The battery just went full charge with the stock charging cable just now.
This morning, I woke up with a dead phone, auto shutoff even though it was
plugged in which I did after solitaire and before going to sleep; as a charging
test.
I don't know if it's the phone or the Cellet retractable cord or both that's
stopping the battery from fully charging normally and consistently. I'll need
to get another data-charge combo chord and do more testing; and a new ROM.
Any ideas anybody?
try a new rom and also try using the stock charger and usb cable. Check inside your usb port on your phone for dust as well. Also go into recovery and wipe your battery stats. In the wipe menu for amonRa and under advanced (maybe here, i dont use cwm on my phone) in clockworkmod. also wipe your dalvik-cache just to clear any issues you may have, restart and give it a test. good luck
I just bought a phone with a broken charger port. Broke clean off the board, so my next step is to try to get liquid solder and stick it to the board. Did you take ur phone apart to see if the port is lose?
So I used the stock USB charging chord. Sure enough, it charged the phone.
Then I tried the portable charger at the coffee shop, worked. So the Cellet retractable
chord obviously had a short or something damaged/shorted for the charging part of
the cable after a year + of use and abuse.
What I don't understand, and haven't researched, is why there are charge only
chords; the stock USB HTC chord charges the phone, but the PC won't recognize
the phone's Micro SD card or the phone as an external drive. I presume the duo use
chords have a data path as well as a charging path. And yes, I know to switch the
phone from charge only to disk drive. The Cellet chord would provide the PC with
recognition for the phone's drive.
Considering the latter, what I'm not sure of, and haven't researched, is why when
the phone stopped charging, the chord eventually stopped charging, the phone
status still showed it as charging; the amber LED light on and the battery icon
in charging animation with white bolt showing? I presume that the charging path
still triggered the charging status, except once when I turned the screen back
on the battery icon was not animated and the white bolt not showing so I unplugged
the chord then plugged it back in where the battery icon animation continued.
Fortunately, or not, this forum returned 600+ results for 'battery not charging' and after
sifting through a few, the charging chord was mentioned which prevented a Sprint trip
and me contacting Seido; thankfully.
So I think manufacturers and ROM/kernel developers should visit this issue as a chord
that actually is not charging, or charging at an absurdly low rate, should trigger some alert
and not show a battery icon animation that appears to be charging normally.
A few days ago, my Nexus stopped charging while turned on.
I noticed that it still charged when the phone was off. So, I started turning it off @ night to charge it.
Well now... for some reason when I plug the phone in while it's off, it shows me the charging animation (the battery filling up), but then all of a sudden it shows a battery with a bolt running through it (im assuming this means fully charged) and then it does the animation again.
Wtf is happening??
thanks guys.
bump..
iArtisan said:
bump..
Click to expand...
Click to collapse
It sounds like the 'Ghost charging' issue. See if the small pin in the Micro USB port is touching something. Look very carefully! If so, try to bend that pin slightly up just so it doesn't touch the surrounding.
If that doesn't help. Buy a replacement port for like 6 USD. Replacing it will take you at most 15 minutes including re-assembly.
Some people reported problems with using LED controller apps like light flow and flashlight apps, try uninstalling any that you may have and see if the problem is resolved, if not then what the guy above suggested seems to be the only solution
Sent from my Galaxy Nexus using xda premium
I had something like that before ... my mobile shows it is charging while not plugged in, sometimes it wakes up and sleeps many times repeatedly as if I'm plugging but and unplugging it again ... finally I found people talking about the problem and the solution was using the original cable for charging ... if not solved yet you can do what I did, clean the micro USB port using a small brush and the last thing you can do if not solved , you can left up the micro USB pin using a thing clip, and that's what solved the problem for me ..
Sent from my Galaxy Nexus using xda app-developers app
hmm... any more input from you guys?
I did a restore so there shouldn't be any apps keeping it from charging now.
tuk1maar said:
It sounds like the 'Ghost charging' issue. See if the small pin in the Micro USB port is touching something. Look very carefully! If so, try to bend that pin slightly up just so it doesn't touch the surrounding.
If that doesn't help. Buy a replacement port for like 6 USD. Replacing it will take you at most 15 minutes including re-assembly.
Click to expand...
Click to collapse
the small pin in the phone? The one that's horizontal? how would I bend it up?
iArtisan said:
the small pin in the phone? The one that's horizontal? how would I bend it up?
Click to expand...
Click to collapse
only bend it up if you can see it touches the surrounding. Bend it up with the smallest thing you can find that fits in there. BE CAREFULL! do not use force. You need to use little power to lift it up. I myself never had this issue but I did read alot posts related to this. And lifting the horizontal pin up solved it for most of the people that sufferd from this issue.
One question: Did you ever use any charger except for the standard Galaxy Nexus charger? (Including car chargers and such)
tuk1maar said:
only bend it up if you can see it touches the surrounding. Bend it up with the smallest thing you can find that fits in there. BE CAREFULL! do not use force. You need to use little power to lift it up. I myself never had this issue but I did read alot posts related to this. And lifting the horizontal pin up solved it for most of the people that sufferd from this issue.
One question: Did you ever use any charger except for the standard Galaxy Nexus charger? (Including car chargers and such)
Click to expand...
Click to collapse
no. never. If I mess up, will replacing the charging port resolve the issue?
Bending the pin up resolve the issue for me. The problem returns back after a charge and unplug perhaps pushing the pin back into wrong position. I uninstalled lightflow app, it had no effect.
I have ordered the replacement usb port, middle cover(the usb socket seems worn out). I will post an update
sitaramp said:
Bending the pin up resolve the issue for me. The problem returns back after a charge and unplug perhaps pushing the pin back into wrong position. I uninstalled lightflow app, it had no effect.
I have ordered the replacement usb port, middle cover(the usb socket seems worn out). I will post an update
Click to expand...
Click to collapse
please do.
I think I have the same problem. I tried bending the pin, removing LED apps, various combinations of unplugging, turning off etc., and I tried changing the USB PCB in the phone to no avail. I even tried different batteries. I have absolutely no clue what the issue is. This is doing my nut in.
ibm9001 said:
I think I have the same problem. I tried bending the pin, removing LED apps, various combinations of unplugging, turning off etc., and I tried changing the USB PCB in the phone to no avail. I even tried different batteries. I have absolutely no clue what the issue is. This is doing my nut in.
Click to expand...
Click to collapse
If you have rooted your phone.. wiping battery stats in recovery mode did the trick for me.. It happened to me atleast 2-3 times.. It's not a permanent solution but just a temporary measure..Im not sure what goes on. I've only had my Gnexus for 1 month and its happened like 3 times. Really3 sucks. Anyone know if it is software related? perhaps unrooting would do the trick??
It could also be a hardware problem, it's been reported before. Following is a guide to replace the USB and charging logic board on a Galaxy Nexus (the guide is for the CDMA version, but it's very similar to a GSM version): iFixit Guide You can order the parts for the GSM version here: Replacement part.
I just ordered one because my phone keeps doing the same stupid things: sometimes it charges, sometimes it doesn't, USB connection is completely erratic and it strangely enough always shows the loading icon when it's off and connected, but doesn't actually charge the battery. Tried wiping, reflashing, restoring, switching on and off, wiggling the cable, taking another cable, readjusting the position of the USB pins - to no avail. Now I'm trying replacing the board. Wish me luck!
zyrill said:
It could also be a hardware problem, it's been reported before. Following is a guide to replace the USB and charging logic board on a Galaxy Nexus (the guide is for the CDMA version, but it's very similar to a GSM version): iFixit Guide You can order the parts for the GSM version here: Replacement part.
I just ordered one because my phone keeps doing the same stupid things: sometimes it charges, sometimes it doesn't, USB connection is completely erratic and it strangely enough always shows the loading icon when it's off and connected, but doesn't actually charge the battery. Tried wiping, reflashing, restoring, switching on and off, wiggling the cable, taking another cable, readjusting the position of the USB pins - to no avail. Now I'm trying replacing the board. Wish me luck!
Click to expand...
Click to collapse
I wish you luckā¦ but I tried that and it didn't help, so don't get your hopes too high.
Sent from my Galaxy Nexus using xda app-developers app
My Nexus is also having the same problem. Bending the USB pins does the trick but it keep coming back.
Last night I had the same charging problem, so, I applied the same trick, but this time, it created a different problem. When I plugged the phone into my computer, it can be charged but is not recognized by Windows. Also, the headphone plug is acting funny. When a headphone is plugged, it is not detected and music still coming from the speaker. All these happened after I bent the USB pins, might be I applied too much force or might be the pins give up itself this time.
Anyhow, just order a replacement part and hope it will resolve all these problems.
I have fixed the mystery headphone problem, It was caused by the Wechat app that I have recently installed. Once I have unistalled that app, the headphone works properly.
Just waiting for the new charging port USB flex cable to resovled the "USB Deivce Not Recognized" problem.
I have a small question. Can I turn off the display backlight when the charger is connected ?How? That would be great temporary solution
I have read in other forums from people that have replaced the USB port with no results.
What I read and worked for me was to lift the small "tongue" inside the USB port towards the screen. As soon as I did it the charging animation disappear. This, of course, is most probably just a temporary fix and the problem will come back eventually. But at least it's stopped driving me crazy for a moment.
I tried plugging the charger and it charges normally, but it looks like the charger pushes the tongue back down so the "charging when not charging" problem re appeared. I pushed the tongue back up and "fixed" it again.
With this in mind one would think that changing the port would fix the problems but people have reported the opposite :/
BTW, I am using the original charger, although, I have used many other chargers with this phone
Hi,
I had the same problem of ghost charging, it started with phone not charging when connected to charger and then randomly showing charging...
Now discovered it causes vbus_tuna_otg wake lock in Bette battery stats and high system usage in setting> battery, basically not letting the phone go to deep sleep, causing battery drain.
Any way to fix this. ?
Sent from my Galaxy Nexus using Tapatalk 2
Recently successfully replaced the LCD screen on my Acer A100. Device worked fine for some time after that repair. Wanting to get a secondary charger for use at work I went to radio shack. Sales "tech" tried several different adapters, found one that fit inside he port, but wiggled. She plugged it in but device wasn't showing a charge. Decided to order one from online. At home the device still would not charge with its own charger. Thought maybe the charger was faulty. Ordered two more. Still the A100 turned off when charger plugged in. Figured tech had burned out the a/c port. Ordered and installed a new one. Still A100 turns off immediately when charger is plugged in. I have 3 chargers now - same results with all 3. Have now ordered a docking station to utilize (hopefully) charging ability through 40 pin connector.
If this connection creates same shut down am I looking at a battery replacement? AM sitting at 33% battery level now, device shut down completely.
Acer wants 199.00 prepaid to submit to them for repair - this is more than I paid for the device! Not really an expense I am willing to pay if all it needs is a battery. There is no erratic behavior , just immediate shutdown as soon as a charger is connected. Any ideas?
PocketFuzz said:
Recently successfully replaced the LCD screen on my Acer A100. Device worked fine for some time after that repair. Wanting to get a secondary charger for use at work I went to radio shack. Sales "tech" tried several different adapters, found one that fit inside he port, but wiggled. She plugged it in but device wasn't showing a charge. Decided to order one from online. At home the device still would not charge with its own charger. Thought maybe the charger was faulty. Ordered two more. Still the A100 turned off when charger plugged in. Figured tech had burned out the a/c port. Ordered and installed a new one. Still A100 turns off immediately when charger is plugged in. I have 3 chargers now - same results with all 3. Have now ordered a docking station to utilize (hopefully) charging ability through 40 pin connector.
If this connection creates same shut down am I looking at a battery replacement? AM sitting at 33% battery level now, device shut down completely.
Acer wants 199.00 prepaid to submit to them for repair - this is more than I paid for the device! Not really an expense I am willing to pay if all it needs is a battery. There is no erratic behavior , just immediate shutdown as soon as a charger is connected. Any ideas?
Click to expand...
Click to collapse
If its doing it on 3 chargers its sounding more like a board charging circuit issue. You could remove the battery and then see if it behaves normally, that'll be battery or board right there. Or if you have a multi meter test output at the battery connector.
Tapatalked from my HTC DNA - ReVolt
Tried connection without battery
pio_masaki said:
If its doing it on 3 chargers its sounding more like a board charging circuit issue. You could remove the battery and then see if it behaves normally, that'll be battery or board right there. Or if you have a multi meter test output at the battery connector.
Tapatalked from my HTC DNA - ReVolt
Click to expand...
Click to collapse
Don't have a multi meter. Tried connection via new docking station, got same response: device immediately shut off. Tried your suggestion, disconnected battery connected to docking station, got immediate shut off. Same with charger via a/c port. :crying: Mainboard is out? But Device responds and acts normal when in battery mode - or is this isolated to the charging circuit part of the main board?
Thanks for the suggestion!
PocketFuzz said:
Don't have a multi meter. Tried connection via new docking station, got same response: device immediately shut off. Tried your suggestion, disconnected battery connected to docking station, got immediate shut off. Same with charger via a/c port. :crying: Mainboard is out? But Device responds and acts normal when in battery mode - or is this isolated to the charging circuit part of the main board?
Thanks for the suggestion!
Click to expand...
Click to collapse
Sounds like its tripping on the charger circuit and cutting out, like a breaker tripping. IMO look carefully for any shorts on the boards, even something stupid like dog hair can cause strange things to happen. A good blasting with air wouldn't hurt either. It could even be the dock port as it does charge from there and is subject to debris also.
Tapatalked from my HTC DNA - ReVolt
one more try
pio_masaki said:
Sounds like its tripping on the charger circuit and cutting out, like a breaker tripping. IMO look carefully for any shorts on the boards, even something stupid like dog hair can cause strange things to happen. A good blasting with air wouldn't hurt either. It could even be the dock port as it does charge from there and is subject to debris also.
Tapatalked from my HTC DNA - ReVolt
Click to expand...
Click to collapse
Thanks again for more suggestions. Yup I have been over the board and all connections with a looking glass. Changed out the A/C dock port. My suspicion is that when the Radio Shack tech powered up the "Almost fits" adapter it blew whatever breaker the board has.
When I had it connected to the docking station with the battery disconnected, it powered on, then immediately shut off. So this definitely sounds like a "blown fuse". I completely disassembled and reassembled it again (except for the LCD screen) and checked all connections and plugs. Nothing visible to indicate a burnout or cross connection.
No odd smells either. Probably some teensy weensy transistor or resistor or something. I am not an electrician - just good at R & R.
Another visit to ebay and I am parting with 50 bucks for a "factory refurbished" motherboard. In the mean time, my beloved tablet will await further surgery. Will keep you posted. Board should be here by Saturday. I hope so - battery is down to 27%. Thanks again for weighing in!
PocketFuzz said:
Thanks again for more suggestions. Yup I have been over the board and all connections with a looking glass. Changed out the A/C dock port. My suspicion is that when the Radio Shack tech powered up the "Almost fits" adapter it blew whatever breaker the board has.
When I had it connected to the docking station with the battery disconnected, it powered on, then immediately shut off. So this definitely sounds like a "blown fuse". I completely disassembled and reassembled it again (except for the LCD screen) and checked all connections and plugs. Nothing visible to indicate a burnout or cross connection.
No odd smells either. Probably some teensy weensy transistor or resistor or something. I am not an electrician - just good at R & R.
Another visit to ebay and I am parting with 50 bucks for a "factory refurbished" motherboard. In the mean time, my beloved tablet will await further surgery. Will keep you posted. Board should be here by Saturday. I hope so - battery is down to 27%. Thanks again for weighing in!
Click to expand...
Click to collapse
To bad considering the crappy battery life so its not like you can charge some other way and swap the battery around.
Example, I have a bricked unit that charges but doesn't otherwise work, so I mean using my bricked board to charge it and the non charge board for use. The a100 isn't really a good setup for swapping around lol. I may actually be interested in that board now that I think about it...
Tapatalked from my HTC DNA - ReVolt
hmmm an idea for the brave
pio_masaki said:
To bad considering the crappy battery life so its not like you can charge some other way and swap the battery around.
Example, I have a bricked unit that charges but doesn't otherwise work, so I mean using my bricked board to charge it and the non charge board for use. The a100 isn't really a good setup for swapping around lol. I may actually be interested in that board now that I think about it...
Tapatalked from my HTC DNA - ReVolt
Click to expand...
Click to collapse
If I could figure out a way to charge the battery OTHER than through the board - I would! Which got me to thinking. One COULD get a second rear panel, cut a door in it, install teensy weensy hinges or create a hinge with cloth tape. then make some sort of extension cord for the battery charging cord, plug it in to the "external" charging board and refill the battery that way.
With a working board and the right know how, one could just extract the board, put it in a box and make a charger out of it too.
But that is just my brain rattling around ideas. :silly: Hopefully this new "refurbished" mother board will do the trick and I will learn my lesson and NEVER let a sales "tech" attempt trial adapters! at 10 minutes to 9pm tonight it was in Texas....
Until I CANNOT use it, I didn't realize how MUCH I used this little tablet!
now it blinks orange?
Oh fer cryin out loud! The motherboard has arrived, I have installed it. Can plug n the charger and drop it onto the docking station and now I get the same response for both charging options: Charge LED lights up orange solid for just about 60 seconds, then begins blinking. Device doesn't respond when power button is pushed UNLESS it is plugged in, and then it just sits at the "ACER" screen.led changes to blue.
OK, wait a minute, this is the third time I have turned it on while plugged in. Acer screen has moved to Android, Device has started. Battery icon showing a question mark. 23%
Turned off, turned back on, now battery shows only 3%????
Think I saw something on the forums about that. will go on a quest.
Finally charging again!
Shhh, don't want to disturb my device....
Found folks on other forums with similar issues of the Acer A100 tablet showing only 3% charge. I removed and inserted the charging pin several times, the device would show solid orange led for about one minute then start blinking. Turned the device on when charger plugged in, unlocked the screen, then with device still plugged in I shut it down completely. Removed charger. Plugged it back in and so far the led is staying at solid orange.
Please keep your fingers crossed for me! This has been quite the roller coaster ride of discovery. Will leave it be for overnight (what is left of the overnight). Then peek at it in the morning. With any luck at all it will have accepted a full charge and I will be greeted with a functioning device! I almost want to learn a new trade..
well now that is weird, got up this morning to a nice blue charge indicator. Yay! Unplugged charger, press on button, hold, hold, hold, hold, hold and device does not start up. Dang it! Plugged it back in, led went solid orange, then started blinking again! Pressed and held on button. Device came on. battery meter shows 3% and a question mark! HUH?
have device plugged in, settings of course show android version 3.2.1 for this motherboard. Guess I need to upgrade it to ICS maybe that will resolve this weird battery issue? Hope soemone here has ideas, feels like I am soooo close to resolving this.
I read the upper posts.
Now I want to share my experience regarding battery load sharing:
I have allso problems to charge the battery.
I have on my tab, for example, 40% of battery power.
I turn my tab off.
When i plugged the charging cable in it shows me the orange led for load.
After two hours or more i turned the tab on.
It shows me not more than 40% but only 37% or so.
So not loaded. This was a bad sign....
I dont no was happend.
I get a little bit nervous but when the tab not get power it doesnt work....
After two/three hours the battery was empty.
Now i can only start my tab while plugged the charging cabel in because the battery will not load.
I have tried several options to find a solution (disconnect the battery, install a new battery, etc. ....).
My solution was fairly straightforward:
I open the tab. Look where the power comes in.
Of the charging socket go four (two red and two black) cable to the motherboard and from the motherboard it goes seven (two red, two black and for me not so important three other coloured cabels) to the battery.
I organized four thin wire and soldered it from the charging socket directly to the battery (of course red to red black to black ).
The result:
When i plugged the charging cabel in while android is running i get no information to load and it shows me not to.
But when i turned the tab off and on again it shows me that it has the battery charged :fingers-crossed: .
After on night while the charger plugged in the battery is fully loaded!!
And of course i get the information in android the discharging of the battery but this is an normaly thing!
So, the problem to load the battery for me is solved .
I hope it helps a little bit for everyone!
frischeis said:
I read the upper posts.
Now I want to share my experience regarding battery load sharing:
I have allso problems to charge the battery.
I have on my tab, for example, 40% of battery power.
I turn my tab off.
When i plugged the charging cable in it shows me the orange led for load.
After two hours or more i turned the tab on.
It shows me not more than 40% but only 37% or so.
So not loaded. This was a bad sign....
I dont no was happend.
I get a little bit nervous but when the tab not get power it doesnt work....
After two/three hours the battery was empty.
Now i can only start my tab while plugged the charging cabel in because the battery will not load.
I have tried several options to find a solution (disconnect the battery, install a new battery, etc. ....).
My solution was fairly straightforward:
I open the tab. Look where the power comes in.
Of the charging socket go four (two red and two black) cable to the motherboard and from the motherboard it goes seven (two red, two black and for me not so important three other coloured cabels) to the battery.
I organized four thin wire and soldered it from the charging socket directly to the battery (of course red to red black to black ).
The result:
When i plugged the charging cabel in while android is running i get no information to load and it shows me not to.
But when i turned the tab off and on again it shows me that it has the battery charged :fingers-crossed: .
After on night while the charger plugged in the battery is fully loaded!!
And of course i get the information in android the discharging of the battery but this is an normaly thing!
So, the problem to load the battery for me is solved .
I hope it helps a little bit for everyone!
Click to expand...
Click to collapse
I really hope other isn't any voltage or amperage changes needed of that can blow that battery up real quick, plus it can't stop charging, you'll need to monitor that yourself.
Thanks for the info though, it does appear to be yet another somewhat common bug these have that can be addressed by a user if they feel the need to.
Tapatalked from my HTC DNA - ReVolt
Not switch the charger off when the battery is full?
I think the charger there is a shutdown would otherwise overload the battery, right?
Or do this the motherboard?
Anyway, for me the tab is fully working now and if the battery is broken, it is not a big expense to replace them .
frischeis said:
Not switch the charger off when the battery is full?
I think the charger there is a shutdown would otherwise overload the battery, right?
Or do this the motherboard?
Anyway, for me the tab is fully working now and if the battery is broken, it is not a big expense to replace them .
Click to expand...
Click to collapse
I was saying the board is in charge of cutting the battery charge off, not the charger itself so maybe keep an eye on it, its a good way for an explosion or fire.
Tapatalked from my HTC DNA - ReVolt
A100 tablet not charging still
Frischies is much braver than I am.
Wiring the battery direct to the charging port- I would definitely worry about burning up the battery or causing a fire - especially while charging when I sleep. I have had more than my fair share of run ins with fire.
The Motherboard I ordered arrived and I installed it. It was listed as "factory refurbished", but unfortunately will not accept a charge. I thought it had charged overnight at one point, but all it does is blink orange and the battery reads 3% or 0%. Turning the device off when plugged in and doing a reset has not helped. The vendor has been gracious to do a replacement, so I will follow that route until I get a working motherboard.
I have discovered that the docking station will be a welcome addition to my Acer tablet paraphernalia! Although this model docking station isn't the one that allows HDMI throughput, it still will be nice for music, and other media. A Bluetooth keyboard and the tablet will offer yet another computer tool!
First things first though, get the tablet to accept a charge - until then it is a really wide flat paper weight! I am getting VERY adept at opening the tablet and removing the internals!
It is working again! The motherboard sent was defective but vendor issued an RMA. Received the replacement yesterday, installed it last night. Charged over night and fully functional this morning! Ahhh it feels good to have my little buddy back again. Didn't realize how much I used it, until I couldn't use it! Thanks to all for the help.
Sent from my A100 using xda app-developers app
The other day I plugged in the Note 8 at night, all was fine. When I picked it up the next day, it was totally dead. There is no charging light. I have tried several chargers. I have tried holding down the power button for over a minute. I took the back off and pulled the battery and reinstalled it. Nothing. Tried multiple chargers (all of which are in working order and several that were used to charge this device previously)
Could this possibly be a bad battery? I would try replacing the battery if it seemed like a possibility, but I've never had a battery go instantly bad. It would make more sense if it just wasn't holding a charge but the charging light would still be on.
It's just out of warranty by a month. Anyone think it's worth spending the money on a new battery?
Thanks in advance for any wisdom
My 5110 does not have a removable battery, though I had two bad samsung USB charging cables, and went to Blackberry and Samsung cables. My second Samsung cable melted down and just about caused a fire at the tablet's connector.
gooberdude said:
My 5110 does not have a removable battery, though I had two bad samsung USB charging cables, and went to Blackberry and Samsung cables. My second Samsung cable melted down and just about caused a fire at the tablet's connector.
Click to expand...
Click to collapse
Thanks for your response. It's not officially removable, but it just involves removing the back and then 8 screws. I'm certain it's not a cable problem. I've tried most every cable and charger I have and they all work on other devices.
I guess I'm a little confused. Where is the charging light? There aren't any LED's on the 5110 and the charger doesn't have any either.
As mentioned, the Note 8's battery is not intended to be replacable, as other phone batteries are. It is doable, and would be my first attempt as it sounds like you've tried multiple chargers.
Beyond that, I doubt anyone here would be able to diagnose without seeing it personally.
Charging light
Eodmule said:
I guess I'm a little confused. Where is the charging light? There aren't any LED's on the 5110 and the charger doesn't have any either.
Click to expand...
Click to collapse
Ok, I have to admit it, I cannot actually remember what it looked like when powered off and charging (mainly because it is rarely powered off). Can someone tell me - Isn't there a battery symbol that displays in the middle of the screen? If so, even if the battery was totally honked, my uneducated guess is that it would still show the battery symbol perhaps with a yellow triangle.
If there is not supposed to be any charging indication at all, then my hopes are higher, because that's what I see.
Either way, I've got a battery on order, so I'll let you know what happens.
pro450 said:
Ok, I have to admit it, I cannot actually remember what it looked like when powered off and charging (mainly because it is rarely powered off). Can someone tell me - Isn't there a battery symbol that displays in the middle of the screen? If so, even if the battery was totally honked, my uneducated guess is that it would still show the battery symbol perhaps with a yellow triangle.
If there is not supposed to be any charging indication at all, then my hopes are higher, because that's what I see.
Either way, I've got a battery on order, so I'll let you know what happens.
Click to expand...
Click to collapse
The only battery indicators are on the screen. When it's powered off and charging you should see the battery in the center charging up. If the battery is hosed it'd be like no battery is in there at all, and on Samsung devices you won't see anything on the screen if no battery is present while power is plugged in.
My clients frequently have the microUSB port (charger port) go bad on tablets in general. If you've got a can of air, blow out the inside of that port (You can also use a compressed air line, but be a little more careful with that). You might also benefit by checking out the condition of the contact pins in there.
Other than that, try a different cable and a different USB charging brick. Try to use the original one that came with it, then try one that has an output of at least 1 amp (The one that came with mine was a 2 amp, but it charges alright with 1 amp). And check your outlet. It sounds stupid, but you never know.
I wanted to share this in case anyone ever experiences the same problem. I had my Note 4 since it was released in October and didn't have any issues until roughly a week ago. All of a sudden, the phone would not fast charge. Whenever connected to the fast charging adapter, it would detect it and charge, but it would not give the fast charge notification and would charge extremely slowly (8 hours to get a full charge from near empty). In addition, my PCs would no longer be able to access it and the phone would not give the MTP option menu when connected. I tried multiple cables, outlets, fast chargers, and batteries in addition to toggling the fast charge setting, wiping the cache, and performing a factory reset - but nothing helped. I finally called verizon and they sent me a new note 4 and everything was working again.....
Three days passed and the same exact issue occurred again on the replacement phone. This makes me believe that the Samsung charger I have has somehow deteriorated and is now breaking the usb connectivity on the phone. I contacted samsung and am getting a replacement for the charger and will have to get ANOTHER replacement phone from verizon (after they finish processing my first replacement).
So if anyone has a similar issue, I would suggest getting a new charger in addition to the phone replacement so you don't have to go through the entire process again. I could be wrong that the charger caused this, but I can't think of anything else besides the recent lollipop upgrade - but everything was working for several days on lollipop for both phones.
If anyone has ideas on how to fix this, please let me know. I can't return the second phone until the first one is processed so no fast charging or PC connection until then. Thanks
Having exactly the same issues. Let me know if you work it out.
maliciousintent said:
Having exactly the same issues. Let me know if you work it out.
Click to expand...
Click to collapse
Same Issues and I have three fast chargers so it is not the charger it is the phone or the 5.0 update.
Mine was not really even charging unless I turned the phone off. I called Verizon and they are sending me a replacement phone overnight. It would not connect to the computer either. I hope this is not a result of fast charging, if so they are gonna get a lot of phone calls
I also have another fast charger which wasn't working... I was thinking that my main charger was breaking the phones USB connectivity and fast charging, but if others are having the same problem then I am wondering if it is something related to the lollipop update. I am replacing the main charger and should have another replacement note 4 come Friday. If it happens again, then I think it points to the lollipop update since both phones had this issues days after lollipop was installed.
I'll let you guys know the outcome
Had the same issue. Used a different wire. Solved the problem. Any Micro USB that can transfer data, can use fast charge. If it's a "power only" cable, or if the data pins/wires are messed up, no fast charge.
graydiggy said:
Had the same issue. Used a different wire. Solved the problem. Any Micro USB that can transfer data, can use fast charge. If it's a "power only" cable, or if the data pins/wires are messed up, no fast charge.
Click to expand...
Click to collapse
Well the problem was that all the cables were working and then stopped. When I got the replacement phone they worked and then a few days later the same thing happened again. So something was causing the connection to break completely. I am hoping that the cause was the charger which I am replacing.
Word of advice: if it stops charging normally In ANY way. THROW AWAY THE CHARGER. I made the same mistake and my Note 4 literally lit on fire melting the lower 1/2 inch of my phone and completely melting the charger. It was so hot by the time I was able to yank the cord out both the phone and charger were melted and destroyed and I ended up with three fingers with minor burns. I am lucky it did not happen when I was sleeping with my infant nearby. I now charge my phone only in the day and on a granite counter in case of fire again.
It stopped fast charging. Then I used the charger again and got a message saying "Transferring power to high powered device" then wham 2" flames
Verizon kept claiming it couldnt happen and thought I used a aftermarket charger until I brought the phone and charger to a corporate store and they prompytly replaced both the phone and charger under factory warranty.
I have three samsung original fast chargers and none of them worked plus the fact that the phone could not be connected to any computer I have makes me think it was the phone. I got the new phone today so I guess time will tell. I just can't see three chargers and cables going bad all at the same time. I also did not take the 5.0 update on the new phone.
my replacement phone stopped fast charging and computer will not recognize it now. I used a different cable that was plugged into the fast charge module from Samsung. I guess that is what caused it. They are sending another phone but for C sake if a cable is the reason this happens surely there should be a fix without replacing the phone time after time.
I finally received the new phone from Verizon and I replaced all the cables I was using to make sure this doesn't happen again. Hopefully the charger was the culprit and the problem is over and done with. Hope no one else encounters this as it really was a pain to deal with.
I got my third phone Monday and so far so good. I had a car charger from Verizon plugged into an extender that had 4 plugs in it. When I unplugged my GPS from it I noticed it was very hot. The Verizon Charger was also hot even though nothing was plugged into it. This may have been what caused my issue. It could have overheated. I replaced it with a different brand and tested to make sure it stayed cool when anything was plugged in and have used it all week without issues. The only other thing could have been the USB cable I used the evening before the second phone stopped fast charging so I do not use it either. So if you use a car charger extender check to see if it gets hot when anything is plugged in. BUT, it is scary knowing something like this can kill the USB on this phone.
I have an external Hard-drive that would constantly disconnect and reconnect with the slightest movement of the cord connected to the computer. It even caused my H/D to get corrupted twice requiring re-formatting. But all I had to do to fix it was to squeeze the big connector on the cord a little and tighten it up. Just a thought.
It's been a week since I received my third phone and everything is working perfectly. I can only assume the charger was breaking it and I'm glad the issue is behind me.
So for anyone experiencing this, I suggest contacting Samsung to replace the charger before going to your cell provider to replace the phone
I'm having the same exact problem. My 2nd replacement phone is now doing the same thing as the first one. I have too many scenarios now though and I'm confused as to which it is. I have two Adaptive chargers.. Batteries, phone, or chargers...
As soon as I replaced the charger, I didn't have this issue again. I suggest sending your chargers back to Samsung (or whatever other brand you have) because one of them is breaking the phones
Sent from my Nexus 6 using Tapatalk
I would place my bet on a bad cable. With the higher voltages that fast charge uses going through the danger of arching and sparking is increased especially if there's a poor connection would fry or weld melt metal inside the connector. This could damage the USB port in the phone and cause the phone's USB port to have a bad connection. This bad USB port in the phone could fry the other cables as well leaving you wondering why everything went bad all at once
My phone will fast charge on my two vehicle chargers (at 1.5 amps and 2.1 amps), but refuses to change any faster than 500 mA on two separate fast charger bricks. The same bricks work fine for fast charging other phones, so it's my phone, not the charging hardware. I'm using the same cable(s) for all instances, which leads me to believe that something is wrong with how the phone interprets the "smart charging" signal on the bricks, or that the phone is sending the wrong charging signal.
I can still connect to a computer just fine, so my issue may be different.
Does anyone else have the issue with bricks but not with chargers without "smart charging" capabilities?
I've had this problem on stock 5.1.1, Jasmine rom 6.0.1, and now CM13. I full wiped everything when reinstalling, so either it's hardware, or an issue propigated through many roms. I've tried a few different kernels too, just to see if that was the problem.
I'm changing the battery tomorrow to check that possibility. Maybe I'll bend the contact a slight bit and see what happens (phone catches on fire)...
Hi guys
I have the same problem as you ,so what I have to do to solve this issue without replace the phone,
I have rooted 5.1.1 stock rom, If i flash full stock rom 5.1.1 does this help or what?
zediiiii said:
My phone will fast charge on my two vehicle chargers (at 1.5 amps and 2.1 amps), but refuses to change any faster than 500 mA on two separate fast charger bricks. The same bricks work fine for fast charging other phones, so it's my phone, not the charging hardware. I'm using the same cable(s) for all instances, which leads me to believe that something is wrong with how the phone interprets the "smart charging" signal on the bricks, or that the phone is sending the wrong charging signal.
I can still connect to a computer just fine, so my issue may be different.
Does anyone else have the issue with bricks but not with chargers without "smart charging" capabilities?
I've had this problem on stock 5.1.1, Jasmine rom 6.0.1, and now CM13. I full wiped everything when reinstalling, so either it's hardware, or an issue propigated through many roms. I've tried a few different kernels too, just to see if that was the problem.
I'm changing the battery tomorrow to check that possibility. Maybe I'll bend the contact a slight bit and see what happens (phone catches on fire)...
Click to expand...
Click to collapse
Turns out one out of the three new cables I bought didn't work, and my OEM cable didn't work for fast charging. Swapping for a good cable fixed the issue.