Bumper Case for SGS2 with Extended 2000mah battery? - Galaxy S II Accessories

I'm looking for a simple rubber or silicone bumper case to go around my SGS2 with the extended battery.
From what I've read the two pricey options are the SGP Neo Hybrid Ex (which "stretches" after a while) and the Walnutt (which costs an arm and a leg to ship from Korea).
Does anybody know of any others? Something cheap and cheerful would do fine - it's for grip as much as anything.
(This a wonderful forum by the way - I've found many answers here to questions that had been bugging the heck out of me!)

There is already a list right in this section:
http://forum.xda-developers.com/showthread.php?t=1274045

Kaze105 said:
There is already a list right in this section:
http://forum.xda-developers.com/showthread.php?t=1274045
Click to expand...
Click to collapse
Hi.
Thanks very much for the reply. Yes, I'm aware of that thread but I think it focuses on full cases including back protection as opposed to purely a bumper around the edges (i.e. similar to the iphone bumper). Apologies if I did not make that clear in the original post.
I find a bumper case to be the most convenient for me by far as I really only want it for extra grip when picking up the phone or pulling it out of a pocket.
In order to be a good XDA citizen I'll post the question in that thread instead.

there are metal bumper like sweet armor or akiba or something which might affect signal and gps, expensive as well
serch "9100 metal bumper" on ebay
if it has to be rubber plastic bumper neo hybrid ex or walnutt or no name walnutt fakes or sgp linear without installing the back cover fit well
Sent from my GT-I9100 using Tapatalk

been using walnutt bumper for quite some time.. volume and power buttons are easier to press with the bumper on.. excellent bumper case i must say.. though had to import one from korea via GMarket..
#ItsMoreFunWithTheGalaxyS2

Yeah... feck it, I just ordered a Walnutt. Yes, it's expensive but everything I read about it is uniformly excellent. I could spend days looking for another one so well done Mr. Walnutt you've just made a sale to Ireland

Related

Recommend Cheap Case For Around $10

Can someone recommend a cheap case for around $10? I've been running the Captivate naked but I think it's about time I consider getting some protection for it. The reason why I've been running it naked for so long is because I don't like the added bulk and heft they bring. However, nothing is perfect in this world and I'd rather suffer from added bulk and heft than risk scratching my Captivate. Of course the slimmer and lighter they are, the better. It'd be great if I can also access the buttons easily.
Doing a quick search, I've come across Otterbox Impact for $7.50 + shipping on Amazon, or I can get a Body Glove for $7.95 + shipping. Or I can just get those cheap silicone cases, but they can get dirt in pretty easily. My friend has a silicone case for his iPod Touch and it looks nasty if you don't keep it clean.
With all the threads on cases, you felt the need to start this one? The Body Glove is probably the simplest and best case out there in your price range.
Between those two get the otterbox. It feels much nicer in the hand and slides in and out of the l
Pocket much easier
Sent from my SAMSUNG-SGH-I897 using XDA App
Go to ebay and look for Captivate Argyle skin, if you are into argyle, They are 3-5$
insaneturbo13 said:
Between those two get the otterbox. It feels much nicer in the hand and slides in and out of the l
Pocket much easier
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
There's someone in the Body Glove Mirage thread with the exact opposite opinion. I guess these kinds of things vary from person to person
Miami_Son said:
With all the threads on cases, you felt the need to start this one? The Body Glove is probably the simplest and best case out there in your price range.
Click to expand...
Click to collapse
Yes because they all look so bulky and hefty (from pictures and reviews) anyways, and well, there's a reason why I kept my phone naked for so long. Don't want it bulky and heavy.
@Others. Thanks. I'll take a look.
I have an Ebay gel case, it's an amzer copy and adds very little bulk, and slides in and out of my pocket fine.. plus no plastic snaps to break when removing it.
FWIW, I got the Otterbox Impact through Amazon as well and am really happy with it. I checked out the Body Glove case and didn't like it, but as said everyone has their own opinions.
joeybear23 said:
I have an Ebay gel case, it's an amzer copy and adds very little bulk, and slides in and out of my pocket fine.. plus no plastic snaps to break when removing it.
Click to expand...
Click to collapse
I'd do this: the super-cheap TPU cases actually provide better protection them most expensive ones. TPU, not silicone.
s44 said:
I'd do this: the super-cheap TPU cases actually provide better protection them most expensive ones. TPU, not silicone.
Click to expand...
Click to collapse
I have a TPU case, and while it seems to add protection and is resistant against dirt, it is not resistant at all against grime and fingerprints. I swear the thing has layers and layers of fingerprints on it.
I ordered the Body Glove case and hope it doesn't have the same issues.
What's TPU...? Got link?
geokilla said:
What's TPU...? Got link?
Click to expand...
Click to collapse
Link to what TPU is: http://en.wikipedia.org/wiki/Thermoplastic_polyurethanes
Link to my case: http://www.futureshop.ca/en-CA/prod...spx?path=058fdee11e321fc183e7b257d44d6561en02
Auridran said:
Link to what TPU is: http://en.wikipedia.org/wiki/Thermoplastic_polyurethanes
Link to my case: http://www.futureshop.ca/en-CA/prod...spx?path=058fdee11e321fc183e7b257d44d6561en02
Click to expand...
Click to collapse
So TPU is like silicone but better? Reading that Wiki page reminded me of chemistry, which I did not do well on.
Argh $20 at FS. Might as well get Otterbox. I remember seeing some of the Otterbox cases, there's a plastic thing like silicone, which I guess is TPU and then there's a hard plastic for the back. Technically I can use it without the hard plastic, which would remove some bulk and weight I guess.
geokilla said:
So TPU is like silicone but better? Reading that Wiki page reminded me of chemistry, which I did not do well on.
Argh $20 at FS. Might as well get Otterbox. I remember seeing some of the Otterbox cases, there's a plastic thing like silicone, which I guess is TPU and then there's a hard plastic for the back. Technically I can use it without the hard plastic, which would remove some bulk and weight I guess.
Click to expand...
Click to collapse
Yeah, even for employees the case is like $12.
Amazon and eBay have TPU cases for <$5 shipped (US, anyway). They're pretty much all from the same Chinese factories, so it won't much matter...
The Body Glove is TPU with some texturing.
joeybear23 said:
I have an Ebay gel case, it's an amzer copy and adds very little bulk, and slides in and out of my pocket fine.. plus no plastic snaps to break when removing it.
Click to expand...
Click to collapse
I'm going to have to agree with this guy.
I have THIS and it is waaaay better than I would have given it credit for, if I hadn't bought it on recommendation from someone I trusted.
It is lightweight, no clips, protects the edges, is not bulky, does not show fingerprints, and is nearly see through in a smoky sort of way, but you still see the diamond pattern just enough to make it look like a $30 case.
I really cannot recommend it enough.
I've had mine for about 3 months now and if I ever lose it, there would be no other option for a replacement. I'm only buying this version as long as I have a Captivate.
For what it's worth, I also bought THIS because it was so damn cheap.......and it's flimsy, feels cheap, and gets fingerprints on it while collecting lint as well.
Stick with the Amzer, if you're not impressed with it, then there's no pleasing you.
evoic said:
I'm going to have to agree with this guy.
I have THIS and it is waaaay better than I would have given it credit from, if I hadn't bought it on recommendation from someone I trusted.
Click to expand...
Click to collapse
This is TPU. The one you didn't like is silicone. See what I mean?
Dude, this is what you want:
http://cgi.ebay.com/Smoke-TPU-Skin-...539794?pt=PDA_Accessories&hash=item20b50de392
2.95 shipped
This is what I have for my Captivate and I really like it. It is not too bulky, does not have a belt clip, is much sturdier than a silicone case (I personally like it better than my brother's Body Glove case), and I have not had any issues with dirt getting inside the case: http://cgi.ebay.com/Black-TPU-Skin-...294862?pt=PDA_Accessories&hash=item2c58ea0d4e
I bought mine as part of a $9.99 accessory package, which included a wall charger, car charger, USB cable, and the TPU case.
Cases are such a personal preference - some people like bigger heftier cases that provide maximum protection, whereas other people like more minimal cases that offer some protection but don't detract from the form factor of the phone. In my case, I fall within the latter category. When I used an iPhone, I usually opted for the Incipio Feather, the Griffin Reveal, or a simple skin (from Best Skins Ever or Invisible Shield).
Overall, I am very happy with the TPU case.
Thanks guys. I think I'll go with the cheap TPU that joeybear linked, but in a different colour and design. Maybe I'll buy a Otterbox Impact as well if I have to buy something from Amazon (HTC Desire screen protector and case)
Edit: Gg. The link by joeybear and JOLiu doesn't ship to Canada. Now I gotta spend more on Amazon or buy from other eBay shops, which is a lot more expensive and who knows how good the product from them is.

[Q] Top 3 cases?

Had this question in my post in General and while I got some great answers to the other questions but so far nothing on this one. Figured I would make a separate topic specifically about this and see what it comes up with.
What would you all think are the top 3 case options that are available?
I personally like the SGP ultra slider for the i9000 but it fits on the vibrant. I will post pictures up tomorrow.
I'm really liking the Case-Mate Barely There. It doesn't bulk up the phone like most of the cases out there.
It all depends on what youre looking for in a case.
If its protection:
Otterbox Commuter
Case-mate Tough Case
Trident Cyclops Case
This works just great for me. Brought 5 of them for the price....just in case. Been using the the first one I put on since I got the vibe in October when it was released. At the time it was only $.98!
http://www.amazon.com/Black-Rubber-...TUTC/ref=sr_1_1?ie=UTF8&qid=1298131944&sr=8-1
As well as these:
http://www.amazon.com/SGH-T959-Prot...uaranteed/dp/B003ZNNC8G/ref=pd_bxgy_cps_img_b
MINUS Stl said:
I'm really liking the Case-Mate Barely There. It doesn't bulk up the phone like most of the cases out there.
Click to expand...
Click to collapse
I second that!
Does the Barely There case come out much in the front to help protect the screen from a front face drop? It is hard to tell in the video on their site. What do you think?
Thanks.
I have the Korean anycall mesh case and I really like it. My only complaint is the"Galaxy S" on the back is gold instead of chrome to match the trim on the phone.
Since it's OEM, it fits nice and doesn't add much bulk. It also adds a nice feel with the holes and the plastic material.
mgerard said:
Does the Barely There case come out much in the front to help protect the screen from a front face drop? It is hard to tell in the video on their site. What do you think?
Thanks.
Click to expand...
Click to collapse
Not really, if you want a good case to protect your phone from drops you want a bit bulkier case like the Trident Cyclops or the CaseMate Tough Case. I personally use the Casemate Tough Case and couldn't be happier.
+1 on the mesh case
Sent from my SGH-T959 using XDA App
I think one of the most popular cases is the "hybrid tpu case". The is a larger thread about it in this section. I love the case, it provides awesome protection and a good heft to the phone.

Walnutt-like bumper without antenna cutout?

Good evening, dear forum readers!
I'm looking for a bumper case for my Galaxy S2, similar to that of the iPhone. (without covering the back) I know the Walnutt cases, which really looking great, but the antenna cutout is bothering me... I just think it is really unnecessary. So I was looking for a bumper case without that cutout, I searched eBay for this and only found fake walnutt-like cases. (Does anybody have experience with those cases, what quality do they have?) Do you know a seller who offers bumper cases without an antenna cutout?
Thanks for your help in advance!
Maybe go for the SGP Neo Hybrid EX. That is pretty minimal.
I have the Walnutt bumper case in 2 black and its awesome. I swapped to it from Neo Hybrid.
The cutout doesn't bother me at all ;-)
Sent from my GT-I9100
troffers said:
Maybe go for the SGP Neo Hybrid EX. That is pretty minimal.
I have the Walnutt bumper case in 2 black and its awesome. I swapped to it from Neo Hybrid.
The cutout doesn't bother me at all ;-)
Sent from my GT-I9100
Click to expand...
Click to collapse
I strongly recommend the OP not to buy the SGP Neo Hybrid EX, I´ve had it for a month and half and the silicone is already loosde due to the heat.
I might get one of those TAURUS bumpers, I like more the Akiba ones but they are so expensive
I've considered both SGP Neo Hybrid EX and the Walnutt bumper, and I like the Walnutt ones more because of the colour combination and the Walnutt-tag. But I tend to drop my phones a lot, guess I'm a "bit" clumsy. I'm afraid that the upper right cutout will leave that corner unprotected. Maybe a full-silicone-case would be a better solution for me?
alstrike said:
I strongly recommend the OP not to buy the SGP Neo Hybrid EX, I´ve had it for a month and half and the silicone is already loosde due to the heat.
I might get one of those TAURUS bumpers, I like more the Akiba ones but they are so expensive
Click to expand...
Click to collapse
Eh? How does the EX become loose from heat? I thought only the regular neo hybrid was plagued by that.
@victorlht88
Very good, quite tight. Much better fit than the neo hybrid.
Sent from my GT-I9100

I can't decide... (yep another case thread)

I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Personally I like the Leather style flip cases, The one that doubles up as a wallet.
http://www.ebay.co.uk/itm/BLACK-WAL..._MobilePhonesCasesPouches&hash=item3374db7913
I would never pay more than £10 (delivered) for a case.
in terms of slimness i've basically narrowed it down to two giants.
1. sgp ultra thin
2. casemate barely there.
not sure which ones better but from what i can tell they're pretty much the same, both at a hefty 25 bucks.
anyways, i'm in the same boat as you. XD
not sure which case to get.
vipfreak said:
I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Click to expand...
Click to collapse
I have the rearth and it is very slim, the only down side it is a beeeoootch to take off (i have a dock/charger for the phone) and if you take it on and off a lot it cracks and the part closet to the usb port cover, nothing earth shattering it actually makes it much easier to take the case off - that and the sgp ultra clear and it is almost like having nothing on the phone at all.
I have used diztronic cases for the last year (for my SII and now my N7000). They are very similar to the boxweave case you posted.
http://www.amazon.com/Diztronic-Fle...0386413&sr=8-3&keywords=diztronic+galaxy+note
As you know TPU protects like a silicon case but doesn't stick in your pocket or collect lint and dust due to it not being "sticky" feeling. I recently sold my SII for over $300 after 8 months of daily use because my SII was in perfect condition as a result of being in a diztronic tpu case. No, I never dropped the phone on cement or anything but I dropped my SII on the carpet from 5+ feet and the phone was unchanged when I picked it up. Didn't pop out of case or battery, etc. Because the tpu cases have a 1/8 or so "lip" on the front they also allow the phone to be placed face down on flat surfaces. IMHO and experience, a good tpu case is all you need to fully protect your phone unless you work in construction or somehow expect to drop it on cement.
So, my vote goes to the boxweave or diztronic cases. BTW I got 2 diztronics for $14 from amazon, the black matte and smoke matte. Great deal!
^I'm actually thinking of getting a real cheap TPU case like that I can mod. My ideal case is a TPU Bumper, maybe the Boxwave Black out without the back part but have the vol and power buttons cut out. I guess it's just not feasible so far... ?
Anyway, Thanks for the input so far guys, keep it coming.
bumper TPU from Amazon
I'm actually thinking of getting a real cheap TPU case like that I can mod. My ideal case is a TPU Bumper, maybe the Boxwave Black out without the back part but have the vol and power buttons cut out. I guess it's just not feasible so far... ?
first post here,
I have one of these.
search amazon for bumper cases.
I'm not allowed to post urls.
I like it, I have it on right now. What I have is different from what's
in the pictures. No cutouts for the buttons and the other cutouts are not
as big. The covers of the buttons are pretty sensitive, unlike the covers
for the Boxwave type which I got from Hongkong for 2 bucks.
Check amazon out, they have a lot of cases.
I also have the elago Breathe case, I love them I have two.
I ended up taking my chances on this. I guess it's going to be as close as I get. Thanks everyone, I'll let you know how it is when I get it.
vipfreak said:
I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Click to expand...
Click to collapse
I have the 3 of them
Go for the Rearth Ringke Slim , is THE BEST OF ALL !!!
Hi all, I'm in a similar dilemma.
I've got a choice between these two:
https://www.gearzap.com/media/catalog/product/3/4/34484-2.jpg
and
http://www.ebay.co.uk/itm/HYBRID-SI...lePhonesCasesPouches&var=&hash=item416682f7b6
I know I should pick the Zenus, but would the inside bit that holds my phone scratch the outer bezel? And since the hybrid one has a silicon case THEN a hard outer shell I figured it would be good too. Any ideas?
Thanks!
I use a an SGP Ultra thin. Comfortable case. Considering the size of the phone the case is great. Merges with the Phone. +1 anytime.
I ordered this one http://www.ebay.co.uk/itm/160732471512?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649. It has a stand that works in both axis.
good
Nice

Disappointed with my SGP Spigen Neo Hybrid Case

So after seeing pictures of it for a while and finally seeing peoples reviews for the case i finally bought the infinity white case. I already had a couple of ebay cases while i was waiting to get something a little more "premium" so i pulled the trigger on the Neo Hybrid. I received it today and have to say it is not what i expected.I already knew about the buttons being too sensitive and the case being more purple than blue so no surprises there, but being advertised as a tpu case i thought this would fit the phone much more tightly the way every tpu case ive ever bought off of ebay for $2 has felt. the tpu portion of the case was either made too large or from a different kind of material because it feels loose on the phone to me. the bumper that goes around the case is meant to keep the tpu tight to the phone, and perhaps add another layer of protection but it tpu along the front of the screen feels very loose and is even a bit sharp to the touch because of its square shape. this is the case i had been using for the past month and i loved the feel, but not so much the look of it. I actually couldnt decide which color i wanted and bought the orange one as well a couple of days ago and it looks like ill be sending them both back in favor of my $4 ebay case.
http://www.ebay.com/itm/Black-PC-TP...670415?pt=PDA_Accessories&hash=item1e6f7fe08f
Just a quick question, did you get the Neo Hybrid Lumi or the Color?
it was the color series with the purple/blue case and white bumper frame, now i have an orange lumi on order and i can only assume it is going to have the same feel to it. way more bummed about how loose the case feels and the way the rim around the screen is really jagged feeling and not rounded at all.
I've got an orange Lumi coming in today, I'll post anything if it disappoints. They looks so damn good in the pictures, especially with the white GS3. I just had to pull the trigger
King Shady said:
I've got an orange Lumi coming in today, I'll post anything if it disappoints. They looks so damn good in the pictures, especially with the white GS3. I just had to pull the trigger
Click to expand...
Click to collapse
the case looks nice but be ready not to use it or modify it so the buttons work. I already emailed them and sent pics in. The little bumpers are way to high so it causes the sensitivity to go through the roof
I don't have one yet but I am very disappointed in the colour selection. How can you not have a black/black like all the others before it? The old ones never sagged on me so I personally want a black/black with the good old silicon and polycarbonate frame.
Don't see it happening though.
SGP products suck in terms of "fit", I had an ultra thin air for my SII, the worst case ever, since then I decided not to purchase sgp again.
Case Mate for the win!!! Very recommended!!! Great quality and fit!!!
Sent from my GT-I9300 using XDA Premium HD app
misha25 said:
the case looks nice but be ready not to use it or modify it so the buttons work. I already emailed them and sent pics in. The little bumpers are way to high so it causes the sensitivity to go through the roof
Click to expand...
Click to collapse
I emailed them about the button issue too. They seem to know about it and said I'm getting an updated version of the Color in mid-August.
lsv-1 said:
SGP products suck in terms of "fit", I had an ultra thin air for my SII, the worst case ever, since then I decided not to purchase sgp again.
Case Mate for the win!!! Very recommended!!! Great quality and fit!!!
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
I ordered their leather pouch because I seriously loved their screen protectors. The pouch was so tight I had to use a razor blade to cut the seams to remove my phone. The pull tab broke off as I was trying to remove my phone with it.
i think theres something to be said for mass producing cases. all the generic ebay tpu cases seem to fit perfect, havent had an issue yet. they all fit nice and snug, cutouts are perfect, the buttons arent as tactile and clicky as more expensive cases but theyre still easy to press
I agree with the OP, I got the neo hybrid lumi in green and I think that this case just feels cheaply made, this is definitely not worth paying $26. My cheap tpu case I got off eBay for 3 bucks is 100 times better than this. The camera cut off holes for this aren't even properly aligned and the case does not fit the phone very well. And also with the issue with the buttons. I highly suggest that no one should buy this case. It's a terrible case and cheaply made and over priced. I'm disappointed with the way this case turned out. I put a bad review on SGPs website to warn other buyers but they would not even post my review. Screw you SGP lol
Sent from my SGH-T999 using xda app-developers app
Was waiting for a review like this... really unsure if to order it.
How bulky is it in comparison to the Incipio Sillicrylic? I can't decide between the two.
Yonatanl2 said:
Was waiting for a review like this... really unsure if to order it.
How bulky is it in comparison to the Incipio Sillicrylic? I can't decide between the two.
Click to expand...
Click to collapse
I highly suggest you go with the incipio case. The Sgp case is not worth it.
Sent from my SGH-T999 using xda app-developers app
Hey Angie have you had any other cases for your gs3? If you notice while the case is on the phone the bit that runs around the edge of the screen can be moved very easily. The band is what makes the case stick to the phone and difficult to take off. My dislike is with the actual tpu case. Which is much more flimsy and soft than most tpu cases
no the band is the only thing that fits the phone well, im referring to the bit on tpu that sticks out past the band around the edge of the front glass, if you nudge it at all its very lose and also is very angular and uncomfortable to touch
angie4u said:
that is so weird because i have no issues with the cameras and holes not aligning with the cutouts, as you can see from the pictures. And the fit is very snug. This is my first SGP case purchase so did I just get lucky? I haven't use the Incipio so I cant compare the two but in terms of bulkiness, I don't find this to be bulky at all. it's very thin and sleek. However, if you are looking for something that's very durable, this might not be the case for you.
Click to expand...
Click to collapse
Yeah I think you did get lucky, because the cut out on mine was not even centered like how it is with yours. The holes on mine came down more to where the camera, lights and speakers are. And in the front, the top part of the tpu covered the silver bezel but hardly covered the bottom part. Close enough to where it looks like the tpu was sagging. I was so pissed that I literally wanted to cover the case in gasoline and burn it for how ****ty, it was lol. I honestly think that the feel of the case just feels so cheap. I have a few other tpu cases I purchased on eBay at a much cheaper price that felt more of a high quality than that piece of crap that sgp made lol. But alas, I returned it back to sgp with an e-mail stating that they did a piss poor job with the case lol.
Sent from my SGH-T999 using xda app-developers app
I guess I'm another of the lucky ones. My cutouts fit perfect, and I have no issues (besides the whole oversensitive buttons issue) but I can relate to the whole "looseness" thing.
As far as TPU cases go, the NeoHyb is definitely not cut to be "tight-fitting" like the some of the other TPU cases I've seen. Without the band, the TPU base IS loose fitting.
With the plastic band though, the entire assembly is tight enough that any attempts to pull it off usually takes the battery cover along with it.
Also, the TPU is more pliable and softer then most other TPU cases I've seen, which makes the "loose" feeling even worse, but I take it it's made that way for better impact absorption.
It's definitely not soft and stretchy like silicone though, which I hate.
So, is the NeoHybrid a perfect case? No. The plastic band is too thin, too slippery. The TPU back is not rough enough. The buttons don't really work without modifications. The TPU rim around the screen, as the OP said, feels "sharp" enough out of the box to be slightly uncomfortable.
Yet, for some God forsaken reason, I like the bloody bugger and I think 20 odd dollars is a fair price for it - considering I've dropped the phone a couple of times already and the case has been doing what it's paid for with aplomb.
YMMV though.
I DO have the Incipio Faxion - another TPU/Polycarb hybrid case I've seen out there - on order though, and plan to do a comparo as soon as it arrives.
Considering I got both at around the same price, it should be an interesting comparison.
I think people are being unreasonable here. This case isn't supposed to be as hard as other TPU cases. That is why there is a polycarbonate hard frame. The whole design philosophy of the Neohybrid is super soft inside with hard shell structural support. I am glad they went for the silicon feel.
The capdase soft jacket feels basically like silicon for anyone going for that type of case. The modello is quite hard by the way. Almost as rigid as a hard snap on shell.
Tomatoes8 said:
I think people are being unreasonable here. This case isn't supposed to be as hard as other TPU cases. That is why there is a polycarbonate hard frame. The whole design philosophy of the Neohybrid is super soft inside with hard shell structural support. I am glad they went for the silicon feel.
The capdase soft jacket feels basically like silicon for anyone going for that type of case. The modello is quite hard by the way. Almost as rigid as a hard snap on shell.
Click to expand...
Click to collapse
Doesn't feel super soft to me.
Sent from my SGH-T999 using xda app-developers app
angie4u said:
did you check if the reseller was selling genuine SGP product? because i almost got a GLAS.t screen protector from a site that was selling it like.. $8 cheaper than SGP but I wasn't sure so I emailed them.. they told me they were fake. maybe it was poorer quality because it was imitation.. but it boggles my mind why anyone would want to imitate $30 items...
Click to expand...
Click to collapse
I ordered it straight from SGP when they were doing the pre orders. So I'm pretty sure it's genuine unless they're lying and are just making some fake products. They gave me my money back though so it's all good. I'm pretty sure those cheap imitations probably turned out better than their genuine product lol.
Sent from my SGH-T999 using xda app-developers app

Categories

Resources