Develop Bugs

Snap-On Cover Hard Case

Has anyone got a hard case style, or this one > http://goo.gl/Omqv ?
I'm looking forward for more picture or review of any hard cases.

http://forum.xda-developers.com/showthread.php?t=730699

vuvsion said:
http://forum.xda-developers.com/showthread.php?t=730699
Click to expand...
Click to collapse
He isn't asking about the mesh case.

jrwingate6 said:
He isn't asking about the mesh case.
Click to expand...
Click to collapse
OP's header: Snap-On Cover Hard Case
Mesh case is hard plastic with perforated holes & snaps over the phone. Am I missing something?

vuvsion said:
OP's header: Snap-On Cover Hard Case
Mesh case is hard plastic with perforated holes & snaps over the phone. Am I missing something?
Click to expand...
Click to collapse
By the picture he provided I assumed he was looking for a 2 piece hard plastic case which covers the sides on the front as well.

jrwingate6 said:
By the picture he provided I assumed he was looking for a 2 piece hard plastic case which covers the sides on the front as well.
Click to expand...
Click to collapse
Then you should have at least linked to the Bodyglove topic, not the mesh. The mesh case is one piece.

keep an eye over at seidioonline.com I absolutely love ALL of their products.

vuvsion said:
http://forum.xda-developers.com/showthread.php?t=730699
Click to expand...
Click to collapse
Mesh case does look nice, but it left the top cover open.

DKYang said:
Then you should have at least linked to the Bodyglove topic, not the mesh. The mesh case is one piece.
Click to expand...
Click to collapse
I didn't link the Mesh Case!!

I would like a Longhorn Hard Rubberized case for now i just have an orange Jelly case.

jrwingate6 said:
I didn't link the Mesh Case!!
Click to expand...
Click to collapse
My bad, quoted the wrong person. oops.

[Q] Slimmest case?

I am looking to get the slimmest case possible for my Captivate. From the research I have done so far it looks like the BodyGlove TPU or the Innocase II Surface might be the best options. Can anyone who has some experience with these cases comment on how much bulk they add to the phone?
Thanks.

http://forum.xda-developers.com/showthread.php?t=767334
The cheap Ebay/Amazon silicone rubber cases are probably the thinnest.

What's wrong with a skin?
Sent from my SAMSUNG-SGH-I897 using XDA App

I use the Amzer Luxe Argyle style case. It's thinner than the Bodyglove. Only problem is the power button is a bit harder to push through the skin.

mfpmax said:
http://forum.xda-developers.com/showthread.php?t=767334
The cheap Ebay/Amazon silicone rubber cases are probably the thinnest.
Click to expand...
Click to collapse
Hmmm... I don't think those are very thin. In fact, from the very first post in the thread you you link to: "The case is pretty thick".

sublimaze said:
What's wrong with a skin?
Click to expand...
Click to collapse
I considered it, but I think I want a bit of impact protection. I will likely skin it underneath the case so I can use it without as well.

mr. grieves said:
Hmmm... I don't think those are very thin. In fact, from the very first post in the thread you you link to: "The case is pretty thick".
Click to expand...
Click to collapse
Yeah I was going by my previous silicone cases and I just got my Body Glove and that case in the mail and it is thicker than the Body Glove.

mfpmax said:
http://forum.xda-developers.com/showthread.php?t=767334
The cheap Ebay/Amazon silicone rubber cases are probably the thinnest.
Click to expand...
Click to collapse
Nope those are the thickest, the argyle one is the thinnest.
http://cgi.ebay.com/Clear-Argyle-Ru...ccessories&hash=item45f60185ac#ht_1528wt_1139
http://cgi.ebay.com/Smoked-Argyle-C...ccessories&hash=item230abccbbf#ht_2309wt_1139

peachpuff said:
Nope those are the thickest, the argyle one is the thinnest.
http://cgi.ebay.com/Clear-Argyle-Ru...ccessories&hash=item45f60185ac#ht_1528wt_1139
http://cgi.ebay.com/Smoked-Argyle-C...ccessories&hash=item230abccbbf#ht_2309wt_1139
Click to expand...
Click to collapse
I can tell you this case is worth buying. Fits perfectly. Feels good on your hand.

nissy86 said:
I can tell you this case is worth buying. Fits perfectly. Feels good on your hand.
Click to expand...
Click to collapse
Its like the body glove right? like just slide it in?

Just slide it in I just ordered the body glove one for ten bucks off eBay. Should be here ina few days
Sent from my SAMSUNG-SGH-I897 using XDA App

every thought of just grabbing a full body invisiblysheild kit?
the stuff was developed to protect the blades on helicopters
military grade screen protection all around.
no bulk no case no nothing. except film,

The Body Glove Mirage has been working great for me so far. Its quite thin

I just got my argyle case off ebay in the mail. I am thoroughly impressed in the quality and fit, very well worth it for the $8.53 I paid. I like it more than my body glove TPU case.
|Sent from my Samsung Captivate using Tapatalk Pro|

Belt Holster

Does anyone recommend a good belt case holster? I prefer a vertical one, and one big enough to fit in with a tpu case... any suggestions?
I am considering these...
http://www.amazon.com/Texture-Hybri...7GHG/ref=sr_1_4?ie=UTF8&qid=1328824221&sr=8-4
http://www.amazon.com/Seidio-HLSSEP...IRT6/ref=sr_1_1?ie=UTF8&qid=1328824221&sr=8-1
or this in case I want to use my TPU cover..
http://www.amazon.com/Premium-Leath...ZYRO/ref=sr_1_1?ie=UTF8&qid=1328824452&sr=8-1

I've heard the holster for the Seidio Surface case will hold a TPU case as well if it's slim enough. Very good holster BTW.
http://www.seidioonline.com/samsung-epic-4g-touch-surface-holster-p/hlsseptasc.htm
EDIT: Saw the link for the Seidio holster in your OP. I wouldn't go with that one because it is made for a phone with no case on it.

SuperSwagSauce said:
I've heard the holster for the Seidio Surface case will hold a TPU case as well if it's slim enough. Very good holster BTW.
Click to expand...
Click to collapse
I think I am leaning towards that one more.... the Seido.... can anyone give feedback on this?

Jess813 said:
I think I am leaning towards that one more.... the Seido.... can anyone give feedback on this?
Click to expand...
Click to collapse
Well I personally have one but the only case I can try with it is the Surface which is what it was made for lol Although if it's no different than most of the TPU cases on the market I'm sure it will fit fine.

SuperSwagSauce said:
Well I personally have one but the only case I can try with it is the Surface which is what it was made for lol Although if it's no different than most of the TPU cases on the market I'm sure it will fit fine.
Click to expand...
Click to collapse
Wait this is made for another case to be on the phone as well?
Sold! I am buying it NOW! Plus amazon has it for $16 with free shipping.( Prime)

Jess813 said:
Wait this is made for another case to be on the phone as well?
Sold! I am buying it NOW! Plus amazon has it for $16 with free shipping.( Prime)
Click to expand...
Click to collapse
Lol glad I could help!

Rugged protection?

I love the idea of minimal cases and whatnot but I at times need rugged tough protection.
Has anyone come across any rugged style protection for the One?
Thanks.

jkbane said:
I love the idea of minimal cases and whatnot but I at times need rugged tough protection.
Has anyone come across any rugged style protection for the One?
Thanks.
Click to expand...
Click to collapse
Nothing, nada, zilch.
Hopefully soon. No name Chinese cases usually pop up first. Hybrid, rugged or tough are search terms I'm using.

firemedic1343 said:
Nothing, nada, zilch.
Hopefully soon. No name Chinese cases usually pop up first. Hybrid, rugged or tough are search terms I'm using.
Click to expand...
Click to collapse
Yeah I've looked all over. Tpu is the toughest it gets right now. Not too mention hardly any are shipping at a decent speed. A lot of which I've seen can take about week's time or more.

jkbane said:
Yeah I've looked all over. Tpu is the toughest it gets right now. Not too mention hardly any are shipping at a decent speed. A lot of which I've seen can take about week's time or more.
Click to expand...
Click to collapse
I would love something from Ballistic or something waterproof.
I ordered an aluminum bumper from aliexpress for about $8. I also have a Nillkin glass screen protector ordered.

Been also looking for something more rugged even though I dont have the phone yet. Even the no name brands haven't come up with one till now :banghead:.

I'm just going with a cheap clear snapon from ebay for now until to hold me over till something more protective comes along

Still no sign of a rugged case yet?
Sent from my OnePlus One

These two cases might be the closest to rugged you're going to get in awhile until someone makes one.
http://www.amazon.com/TUDIA-Bumper-...F8&qid=1406599274&sr=8-9&keywords=oneplus+one
https://tpu-cases.com/index.php?main_page=product_info&cPath=104_105&products_id=396

Knight-Rider said:
These two cases might be the closest to rugged you're going to get in awhile until someone makes one.
http://www.amazon.com/TUDIA-Bumper-...F8&qid=1406599274&sr=8-9&keywords=oneplus+one
https://tpu-cases.com/index.php?main_page=product_info&cPath=104_105&products_id=396
Click to expand...
Click to collapse
I've searched here and the oneplus forums and obviously around ebay/amazon. I bought a diztronic tpu case to hold me over but looking to buy a otterbox like case as soon as they hit the market.

bluruld said:
I've searched here and the oneplus forums and obviously around ebay/amazon. I bought a diztronic tpu case to hold me over but looking to buy a otterbox like case as soon as they hit the market.
Click to expand...
Click to collapse
That may take a while. There hasn't even been any cheap Chinese knockoffs rugged cases made yet!

This is probably the best we get right now....
http://www.amazon.com/TUDIA-Bumper-...F8&qid=1407865561&sr=1-9&keywords=oneplus+one

TitoXx said:
This is probably the best we get right now....
http://www.amazon.com/TUDIA-Bumper-...F8&qid=1407865561&sr=1-9&keywords=oneplus+one
Click to expand...
Click to collapse
I bought both Tudia and Diztronic and kept the Tudia, I returned the Diztronic it just didn't feel right in the hands.

I hope one of these companies who make rugged cases do one for the OPO. I wouldn't mind some sort of rugged case. I typically use a very thin case however there are times where I would like the added protection.

i don't understand how you could count the tudia as a rugged case? looks like a normal tpu case!

toge64 said:
i don't understand how you could count the tudia as a rugged case? looks like a normal tpu case!
Click to expand...
Click to collapse
It's the most rugged you're going to get right now. It is thicker than the cruzerlite.

I have both the tudia and the cruzerlite. They both seem to offer the same amount of protection, but the tudia seems more slippery in the hand.
Sent from my One A0001 using Tapatalk

The fact that I'm not even seeing no-name cases like this:
http://www.ebay.com/itm/Rugged-Impact-Hybrid-Hard-Kickstand-Case-Cover-For-LG-Google-Nexus-5-D820-/141217693539?pt=US_Cell_Phone_PDA_Cases&var=&hash=item20e13aff63
is bugging me to no end! Even this is better than a TPU case and with the number of these in the Chinese market alone you'd figure SOMEONE could slap one together!

WA_Bob said:
The fact that I'm not even seeing no-name cases like this:
http://www.ebay.com/itm/Rugged-Impact-Hybrid-Hard-Kickstand-Case-Cover-For-LG-Google-Nexus-5-D820-/141217693539?pt=US_Cell_Phone_PDA_Cases&var=&hash=item20e13aff63
is bugging me to no end! Even this is better than a TPU case and with the number of these in the Chinese market alone you'd figure SOMEONE could slap one together!
Click to expand...
Click to collapse
I'd buy that case in a heart beat! Yea, I realized that when I didn't even see cases like the above from June till now that there were going to be slim pickings when it came to rugged protection.

WA_Bob said:
The fact that I'm not even seeing no-name cases like this:
http://www.ebay.com/itm/Rugged-Impact-Hybrid-Hard-Kickstand-Case-Cover-For-LG-Google-Nexus-5-D820-/141217693539?pt=US_Cell_Phone_PDA_Cases&var=&hash=item20e13aff63
is bugging me to no end! Even this is better than a TPU case and with the number of these in the Chinese market alone you'd figure SOMEONE could slap one together!
Click to expand...
Click to collapse
Jeez, that case would make the OPO almost as bulky as my nexus 7 in its gumbox case ?

timothydonohue said:
Jeez, that case would make the OPO almost as bulky as my nexus 7 in its gumbox case ?
Click to expand...
Click to collapse
Well, I wouldn't need a case like that all the time. But at my work work it would be very good to have!

Putting dbrand skin on top of a case

Hi all,
I really like minimalist case like MNML.
But, it is too slippery, even after some days of use.
So, I have been thinking to buy dbrand skin and put it on top of MNML case to help with the grip.
Do you think that would fit?
I know, you might ask why don't I use just dbrand skin? Only dbrand skin is too thin for my liking
Thanks

I did it a while ago.. Dbrand'ed my ringke case.. See this thread
https://forum.xda-developers.com/pixel-2-xl/accessories/dbrand-ed-powerjacket-case-t3701809

Nice, and that fit nicely there!
I have some doubts now because MNML case has bump on the camera ring. Probably that won't fit.

gogol said:
Nice, and that fit nicely there!
I have some doubts now because MNML case has bump on the camera ring. Probably that won't fit.
Click to expand...
Click to collapse
I put a skin on the MNML case. Fits perfectly. As for the fingerprint scanner, I heated up that section and then just pressed my finger down to form around the button. Looks like it was meant to be like that. No issues taking the case of either. I'll post some pics when I get home this evening.

Amjad.AbdulGhani said:
I did it a while ago.. Dbrand'ed my ringke case.. See this thread
https://forum.xda-developers.com/pixel-2-xl/accessories/dbrand-ed-powerjacket-case-t3701809
Click to expand...
Click to collapse
Well I'm sold

RoccoN4 said:
I put a skin on the MNML case. Fits perfectly. As for the fingerprint scanner, I heated up that section and then just pressed my finger down to form around the button. Looks like it was meant to be like that. No issues taking the case of either. I'll post some pics when I get home this evening.
Click to expand...
Click to collapse
Which skin? dbrand?
Thanks for your info and please if you can post some photos

gogol said:
Which skin? dbrand?
Thanks for your info and please if you can post some photos
Click to expand...
Click to collapse
Put the carbon one.

RoccoN4 said:
Put the carbon one.
Click to expand...
Click to collapse
Oh wow! Thanks
I think that's dbrand skin isn't it?
Does it has good grip?
MNML alone is too slippery.
I just ordered matte black dbrand skin.

gogol said:
Oh wow! Thanks
I think that's dbrand skin isn't it?
Does it has good grip?
MNML alone is too slippery.
I just ordered matte black dbrand skin.
Click to expand...
Click to collapse
I wouldn't say it adds a lot of grip but more then just the case.

That look like a cool idea will it work on clear Ringke or Spigen cases?

silesraf said:
That look like a cool idea will it work on clear Ringke or Spigen cases?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=74576609&postcount=2

i did it on my Diztronic case for my Nexus 6p. Worked great! Just have to take some time because obviously it wont fit exactly right.