[Q] Screen won't sleep? Help! - myTouch 3G Slide Q&A, Help & Troubleshooting

I rooted my brother's slide a while back and installed a stock froyo based rom (I'm not sure which one). He had been having some minor issues with his phone (no big deal) and I had been planning to switch him over to cyanogenmod, but this morning his screen would not go to sleep no matter what he did. It just wakes up immediately. He suspects that the device is registering a push on the optical trackpad, because when he tried to restart the phone, it auto selects and sometimes confirms options for him in the popup menu. The trackpad wake seems to be preventing the phone from sleeping, but it could also be something else.
I thought the best course of action would be to install CM6 (he had the older clockwork recovery so I thought i'd put the stable 6.1 on there to walk him through the steps while I wasn't physically present to mess with his phone). The installation went perfectly, but the problem is persisting. If i'm not mistaken, cm6 comes with a custom kernel of its own so that's probably not the issue. Also, for some reason, when his phone wakes up after attempting to be locked, it now briefly shows the lock screen and jumps ahead to the recent apps screen (as if the home button has been long pressed).
This problem is baffling us. If any of you have any ideas what might be wrong I'd greatly appreciate it. Thanks guys.
EDIT: I thought it would be worth mentioning that in recovery, the trackpad function seems to be normal (according to him). He's several hundred miles away from me at the moment so I haven't seen the issue up close myself.

Related

[Q] Help needed for fixing quirky/malfunctioning software!

Hi folks, I've lurked here for quite a while and gotten some invaluable info; so first off thanks for all of the contributions from the gurus here!
Now, I have a pretty strange issue that I haven't been able to find an answer on anywhere. I'm hoping that someone can help me sort this.
The background story:
My wife has a MyTouch 3G Slide that I bought for her back in July. Last week she managed to drop it in some water. It DID NOT get fully submerged since the water was very shallow. However, it did get a slight amount of intrusion. She pulled the battery in a relatively quick amount of time and we let it sit in a bowl of rice to dry out for a couple days.
The current deal:
When I felt the phone was sufficiently dried after a few days, I fired it up. It took a very long time to get out of the MyTouch splash screen and loaded noticeably slower than normal. Once in, the phone functioned perfectly normal. Absolutely no issues at all with any functionality once you get past the security pattern.
However, whenever you put the phone to sleep, it does some funky stuff. The screen goes black for a second and then comes back on, ready for you to swipe down and then enter the security pattern again. Then it will go black again. Then it comes back on. It just continues to do this, never stopping. Sometimes it will go to the security pattern screen too.
So I figured this may have been some hardware issue since it was acting like someone was just repeatedly pressing the power button. First I wanted to try a simple reboot though. Upon rebooting, the phone would not get past the splash screen. It just froze there.
I pulled the phone apart to see if maybe there was some corrosion on the PCB from the water intrusion. Everything looked fine, but while I was in I did a little wipe-down with some alcohol, then I put it back together. After multiple attempts, I was able to get it to boot again. But the boot process was still VERY slow. Occasionally, it would boot into safe mode as well. But when it booted normally, everything would always function great once logged into the phone. This convinced me that it wasn't a hardware problem since the phone would not cut into sleep mode or anything when logged in. It worked perfectly fine. So I figured that maybe there was some sort of corruption that occurred in the software.
So I tried a hard reset. Didn't fix it.
Then I figured that maybe I needed to do a reflash. So I rooted the phone since the water plunge voided the warranty anyways. Once rooted, I flashed TeamFenix 1.7.1 successfully.
But the phone still only fully boots intermittently, and the boot process is still slow. It also has the same problem in sleep mode which is killing the battery fast since the screen is pretty much constantly on. But once in, the flashed ROM works perfectly just like the stock ROM.
Video of the condition:
Since I'm new, I'm not allowed to put any links in my post. But if you type in the string below after the YouTube url, you'll see a quick video I posted of the condition.
watch?v=dX55URtaRHo
So it seems that there is some crazy issue only upon bootup and when the phone is put to sleep. Can anything be done to fix this? Is there a way to locate and fix corrupted software? Any and all help is appreciated!
Sorry for the self bump. Any devs out there have any suggestions? I gotta get this thing sorted.
If its happening on both stock and teamfenix, I'm pretty sure it's a hardware issue. Flashing a rom completely replaces the software, so it doesn't sound like its that.
Sent from my T-Mobile myTouch 3G Slide using XDA App
It actually seems like a problem in the power button. Did you check the contacts for the power button? Repeatedly pressing the power button will first lock it initially and dim the screen. Press again, then it gives you the chance to unlock. Press again and it goes back to sleep. Wash rinse repeat...
Yes, I understand. But if it were an issue with the power button, when you logged into the phone, it would randomly put itself to sleep. It doesn't do that, it functions perfectly normal with no errors whatsoever when you are logged into the phone. This problem is only exhibited in sleep mode which would rule out a hardware issue with the power button.

[Q] SD Card causing Power Button to be Unresponsive?

So about a week ago or so I began, out of the blue, to have power button issues. The power button would turn my incredible on when it was off. It would wake it when it was asleep/screen off. After that it became hit and miss. When the screen was on it was highly unresponsive. Sometimes it took several presses to get it to turn off, sometimes I couldn't turn it off at all. Sometimes a tap would bring up the shut-down menu as if I had long-held it. Long holding it usually didn't work either. A few times I had to do a battery pull just to shut it off. I eventually downloaded quickboot and a screen lock widget just to get that functionality back. The last thing I remember downloading before this started happening was 'reddit is fun'. I uninstalled that after the problems, but to no avail.
Now lets go over what I was set up with. I have an amoled unit. I was at the time using CM7 Final and whatever kernel was included with it. Although I have used it a lot in the past, I didn't have setCPU installed or running this time. The only root-required thing I can remember running was autostarts. No changes were made to autostarts in the weeks leading up to the problem. I have used many roms; Frankenrom, Virtuous, Ruby, ShadowRom, IncDoes AOSP, The New Guy, Warm 2.2, Redemptive, SkyRaider, Evervolv, and several of the CM Nightlies. While using Redemptive my radio completely quit working across the board. Returning it to stock and then re-rooting fixed it. As far as I can remember I had only used SkyRaider, Evervolv, and the CM Nightlies up until I was using CM7 Final.
So after the problem started happening I decided easiest thing to do would be to try and flash a nightly over it. Tried that, didn't work. That was kind of a long shot, and I decided I might need a full wipe. Did the full wipe and installed the latest nightly. The problem persisted. I think I flashed the latest SkyRaider then, still had the problem. This was starting to seem kind of serious so I did another complete return to stock. I booted into the stock rom and used it for a bit, maybe a few hours, it seemed to work. Since things seemed back to normal I flashed the latest CM Nightly again. Seemed to work for a minute, then it was back to the same old problem.
Now around this point I, for reasons I can't remember, remove my 16 GB SD card and put the stock 2 GB one back in. I have SkyRaider on that and I flash it, it works perfectly. In fact it continues to work for a day or two. All this time my old 16 GB is sitting out on my desk. I eventually decide to clean it up, deleting a bunch of stuff I didn't need on there, and throwing it back in. After putting the 16 back in the problems creep back in. Here and there, then only working half of the time, then barely working at all.
About this time I come up with the idea that maybe something on the SD card, or the card itself, is causing this problem. Seems like a long shot, but I can't think of any other reason that would fit. I do not install apps to my SD card.
So I pull the SD card out. I was at work and I didn't have my old 2GB, so I just left the slot empty. It seemed to still be messed up, but over the course of the next hour or so it began to work correctly again.
Now I'm at home and I have deleted everything from my 16GB, and reformatted it completely. I'm about to flip it back in and see how things go.
The strange thing about this whole situation was that the problem didn't seem to just start and stop. It was as if it phased in and phased out over time, but always being caused by certain things. It seems organic if you know what I mean by that.
Feel free to tell me this is a really ridiculous idea. I think it might be. Is there something critical to the android system that could possibly be stored on the SD card?
Maybe its a hardware problem that's being affected by the weather in your area, because you can run android fine without an SD card. You would be surprised how the humidity affects electronics. This is just a crazy thought to a crazy problem lol
Wow, finally there is someone else out there with this problem.
Mine didnt have this problem till i flashed MIUI latest rom....but even after somehow making it into the recovery mode...i was able to restore my previous cm7 build...
BUT....the problem persists....
So I think I am going to pull out the 8gb sd card my friend gave me from his EVO 4g.
It annoying because sometimes i cant get into even hboot with power + volume down.
I know the volume buttons work because i can change volume on phone.
I can still see the power button still being pressed down, its not stuck or anything...it works 50/50
Can you give an update OP, please?
I also have an AMOLED Incredible..and dont want/can afford another phone...
have any of you opened up your phone to see if the button was still soldered to the board?
- i did and it is, same issue.

[Q] Screen Won't Lock

I'm having a rather odd problem with my wife's Slide. She was running an older CM7 rom and was having a problem getting the screen to lock. When you press the power button, it would act as if it is going to lock, the screen would go black, but then it brought up the recent programs. Simple problem I though... I downloaded CM7 and got ready to flash it, but over time her SD card has had things deleted and I wasn't able to get to recovery. I loaded the esprimg.zip onto her card thinking that was all I needed to load, but that forced us back to a stock ROM. No worries there, she doesn't care if she has an unrooted stock phone, or CM6 or 7, and I guess I will never have to hear her say the rooted ROM is ruining her phone.
So, now we are stock and the problem still exists. The screen will not lock when using the power button, nor will it lock when it times out. I put the pattern lock on, and still it will not lock, although it will load the pattern lock screen. I've rebooted a couple of times to no avail, and the phone is as stock as can be, no bells or whistles, no strange apps, actually the only market app on the phone is Words with Friends. Has anyone run across this issue, or know of maybe a third party screen lock app that I could try?

ICS Unlock screen / touch screen unresponsive - anyone see this?

Using the stock ROM for the Galaxy Nexus, Android 4.04 from Google, I'm finding this bug (which has been elsewhere reported, but not acted upon by Google) where the touch screen is unresponsive. You press the 'power' button, the 'slide to unlock' screen appears, but the touch screen doesn't respond to anything.
If I get a call while the phone is sleep, the same thing occurs - can't answer the phone.
I usually have to put the phone to sleep/wake it up 5, 6, or more times before the touch screen again becomes enabled in these situations.
Does anyone know why this happens? There has been much conjecture about this, but I have yet to see anyone say for sure why this would be happening. A disabled touchscreen at such a crucial point in a GUI is pretty horrific.
- Tim
was gonna make a new thread on this but since i found one with the exact same thing happened figured why waste space, but anyway this just happned to me running stock 4.0.4 cdma unrooted. was just charging my phone unlocked it to check twitter and the lock screen was completely unresponsive for whatever reason. I continued to turn the screen off and on several times and then just decided to pull my battery and it worked fine.
This is the first time its happened to me and its kinda troubling as I dont want this to be a recurring thing and was wondering if this continues to happen or its just some single random occurence?

[Q] My GS3 is going haywire and it's probably a hardware issue.

I am wondering if anyone ever encountered these kind of problems,
First of all i've been running cm10.2rc for the past month or so and was having no problem whatsoever. Then out of the blue last night, my screen started flicking on and off, then it'd reboot off for no reason. It goes into apps of widget for no apparent reason either. Even in recovery mode (recovery touch) it clicks options without me touching anything.
I've flashed a dirty/clean, Cm11 (don't like it came back to cm10).
It's as if my power button gets stuck.
I'm wondering if this is a common hardware issue that i could solve by changing a part myself off ebay or any kind of solution for this insane phone?
Thanks

Categories

Resources