Hi there,
since the release of cm 7.2 fxp104 my arc doesn't boot after flashing the new kernel with flashtools. If I flash back to kernel fxp103, everything works fine. With fxp105 it's just the same.
I don't now if I'm doing something wrong; I flashed new ROMs several times without any problems.
Thanx for your help.
macmeier said:
since the release of cm 7.2 fxp104 my arc doesn't boot after flashing the new kernel with flashtools.
Click to expand...
Click to collapse
You mean flashing the kernel using fastboot.
Have you flashed .42 firmware?
That's what I wanted to say, thx.
Yes, I'm using this firmware. And fxp103 is running fine.
Sent from my LT15i using XDA App
So you flash the new kernel, boot into recovery, wipe everything, flash ROM/gapps and then when you reboot it ends in a bootloop?
I flash the boot-file and after that my phone hangs up during booting. I'm not able to enter the recovery.
Sent from my LT15i using XDA App
But you press several times volume down?
Have you tried to reflash the kernel?
Yes, I did. I flashed a lot of ROMs in the past and I flashed the bootfiles for fxp104 and 105 without any notifications about errors. But when starting the phone I get a blackscreen and that's it. I can't even switch the device off. Flashing back to 103 is the only thing that works.
Sent from my LT15i using XDA App
Related
I'm not a complete noob but I haven't been able to install CM9 on my Play.
I have installed both other ICS ROMs but keep returning to stock with the DoomLord Kernel from my CWM backups.
I would also like to try CM9 but can't get it to boot.
I understand the need to flash a Kernel first and I see the main difference with CM9 is that the boot.img of the kernel is contained within the zip file rather than a separate download.
I'm successfully flashing this kernel (from Flashtool) but then the phone won't boot into CWM to flash the rest of the ROM.
What am I doing wrong?
Press the volume down button rather than the back button to enter recovery
Extract the kernel from the zip archive first
Flash the image
Wipe data/factory reset
Install ROM from SD
Install GAPPS zip (if you want)
Sorted
Flash tool should automatically boot you into recovery for the ROM install when you type "reboot"
Backup first though
Sent from my Xperia Play using xda premium
Which model of Xperia Play do you have, Christianedward?
Sent from my R800x using XDA
Cheers guys it sounds pretty much what I'm doing but I'll try again now FXP 112 is out.
I have a R800i by the way.
Baseband
I was already using Baseband 64 (Build 4.0.2.A.0.62) but the baseband linked to in the CM9 thread is to this "XperiaPlay_3.0.1.E.0.88_R800x.ftf" not what I have downloaded (and installed) "R800i_4.0.2.A.0.62__1253-4437_.ftf".
Maybe this is my problem?
Working now
Michealtbh said:
Press the volume down button rather than the back button to enter recovery
Click to expand...
Click to collapse
Its working now with FXP112
I sure I tried this as one of the other ICS ROMs use a Free Xperia Kernal.
I never even got the boot logo but I tried downloading FXP111 twice to make sure it wasn't corupt but all is well now the baseband differences were a red herring.
christianedward said:
Its working now with FXP112
I sure I tried this as one of the other ICS ROMs use a Free Xperia Kernal.
I never even got the boot logo but I tried downloading FXP111 twice to make sure it wasn't corupt but all is well now the baseband differences were a red herring.
Click to expand...
Click to collapse
Any way besides up.to where I can get fxp112? Damn side doesn't work for me
Sent from my Xperia Play using xda premium
You can register for free and you get a slightly better response, I could only get 1 download a day.
christianedward said:
You can register for free and you get a slightly better response, I could only get 1 download a day.
Click to expand...
Click to collapse
It only downloads a 9mb (roughly) file for me no matter what browser I use.
I've flashed MIUI v4 now anyway
Sent from my Xperia Play using xda premium
christianedward said:
I'm not a complete noob but I haven't been able to install CM9 on my Play.
I have installed both other ICS ROMs but keep returning to stock with the DoomLord Kernel from my CWM backups.
I would also like to try CM9 but can't get it to boot.
I understand the need to flash a Kernel first and I see the main difference with CM9 is that the boot.img of the kernel is contained within the zip file rather than a separate download.
I'm successfully flashing this kernel (from Flashtool) but then the phone won't boot into CWM to flash the rest of the ROM.
What am I doing wrong?
Click to expand...
Click to collapse
i think its only work with baseband 64 , its firmware 4.0.2.a.0.62.
Hi all,
I've just recently made the switch from CM9 FXP and Kieran's kernel. I decided to go back to a stock rom but with DoomKernel. I flashed both the .42 and the .62 but DoomKernel 12 fails to boot on both 2ghz and 1.6ghz. It just loads and then powers off. No blue light, nothing. I've used DK before in the past and I'm wondering why it's not working now. I even tried using the old DK v8 I had (that previously worked) and now the same problem, just a bootloop. Not sure what I'm doing wrong. Any help would be appreciated
Did you try flashing to totally stock incuding kernel first?
Sent from my R800x using XDA
DoomKernel 12 is broken and known to not boot. 11 works fine
Doomkernel v12 has error on boot, don't install it.
I recommend you to install v11.
Michealtbh said:
DoomKernel 12 is broken and known to not boot. 11 works fine
Click to expand...
Click to collapse
shocito said:
Doomkernel v12 has error on boot, don't install it.
I recommend you install v11.
Click to expand...
Click to collapse
The OP said he tried going back to an earlier known good version and still had trouble, so I don't think it's just a version issue. I believe I have read more than 1 post indicating that if you use DarkForest or DoomKernel and want to switch to the other, you need to switch to stock first. Not sure why, but hey! He's not working now so it's worth a shot.
Make sure you reboot in between and maybe pop in and out of recovery before the next step.
Sent from my R800x using XDA
Yes, I did flash stock kernel. It's ok now though. I used DoomKernel v11. Strange how v8 didn't boot but it's always worked. Oh well. Thanks for the help everyone
Hi all,
I have an LT15i. Has an unlocked bootloader. No problems using fastboot or flashtool. I have the latest DoomKernel installed. The current setup is attached.
I tried 3 different GB roms. These are:
-TeamXperia SE Tweaked
-T.e.a.m Stock Rom
-Arconium 8.2
No problems installing the zip files thru CWM but then I get boot loops.. EACH TIME!
I wipe all cache.. I do factory resets.. Try again.. No go.. still get loops..
Could someone please tell me if I am missing something? Thank you.
PS: And do you happen to know why I have both 5.0.2.7 and 5.0.2.8 cwm on my phone? If I press down on the volume locker it loads 5.0.2.8 and up loads 5.0.2.7.. is this normal behavior? One is touchscreen enabled, the other is not..
Did you also format system?
Sent from my LT18i using XDA
PrimaryMaster said:
Hi all,
I have an LT15i. Has an unlocked bootloader. No problems using fastboot or flashtool. I have the latest DoomKernel installed. The current setup is attached.
I tried 3 different GB roms. These are:
-TeamXperia SE Tweaked
-T.e.a.m Stock Rom
-Arconium 8.2
No problems installing the zip files thru CWM but then I get boot loops.. EACH TIME!
I wipe all cache.. I do factory resets.. Try again.. No go.. still get loops..
Could someone please tell me if I am missing something? Thank you.
PS: And do you happen to know why I have both 5.0.2.7 and 5.0.2.8 cwm on my phone? If I press down on the volume locker it loads 5.0.2.8 and up loads 5.0.2.7.. is this normal behavior? One is touchscreen enabled, the other is not..
Click to expand...
Click to collapse
You must check to have the proper kernel and ROM. GB Kernel will not work with ICS ROM and vice-versa.
There is no format option in CWM.. Which one are you talking about?
Yes there is on mounts!
Edit: but like okty2k said check if you have the right ROM and kernel!
Sent from my LT18i using XDA
Oh yes, sure.. I'll try formatting and let you know..
and about DoomKernel V22 and .62 GB rom.. wouldn't that work? If it won't then which kernel version should I use that has cwm?
PrimaryMaster said:
Oh yes, sure.. I'll try formatting and let you know..
and about DoomKernel V22 and .62 GB rom.. wouldn't that work? If it won't then which kernel version should I use that has cwm?
Click to expand...
Click to collapse
It should. Just to double check, try another kernel.
http://forum.xda-developers.com/showthread.php?t=1453760
p.s. why you don't move to ICS?
I was running ICS Alpha.. The phone lagged, touchscreen would stop working from time to time, force closes.. Got sick of it.. I just wanted my old system back..
Though I have not yet tried the official release of ICS.. Do you have an Arc running ICS? Are you happy with it, I mean the OS?
Dude 4.0.4 kicks ass!
Sent from my LT18i using XDA
Well that's good to know that it does
I guess DoomKernel V22 is intended for ICS because I did like you said and formatted system too this time. Still no joy..
Since none of the three GB roms are working, it must be a kernel-rom incompatibility thing..
I'll download ICS and give it a go.. Thanks for the help mates.. I'll let you know about the result
Cool! Let us know your feedback about 4.0.4!
Sent from my LT18i using XDA
I just installed JJ's Hybrid ROM. Been using it for the past 20 minutes..
My phone has never been snappier! I love how you can browse apps and widgets with previews.. Loving it already!
Let's see it after I install Launcher Pro though
I have a similar problem but I cannot accese to the recovery mode, my arc just loops and loops... can u tell me how to access recovery mode??
I already tried Power +back and many other combinatios and no response....
If you have a kernel with cwm then you should be pressing volume down button a couple of times while booting..
i have the ClockworkMod Recovery 5.0.2.6, while booting I press volume down and doesnt enter...
any other suggestion??
Vol up or down works for me. I would flash the cwm kernel again if I were in your shoes..
No good... volume buttons are useless... dunno the reason...
How can i flash de kernel, without being able to access recovery mode??
thxs for the replys
Look here: Namaste Guide
Hi there,
I definitely can't install any latest ROMs on my ARC (Ultimate HD 3.x, Zelly Cream,...) using CWM.
The latest ROM that doesn't hang during boot or just give black screen is Ultimate HD 2.0.3 (Ultimate HD MOD works either)!
- I've tried different kernels like Lupus, Fusion, RUSH as recommended in several threads but without any chance with latest ROMs...
- I've also tried re-download ROMs and kernels... No change.
- I've also tried rebooting without SD in case it sucks... No change.
For info I'm not noob, I use custom ROMS since HTC Legend...
I obviously erase /CACHE /DATA /SYSTEM /SD-EXT also dalvik and battery stats each time I install custom roms and always do clean install. No upgrade.
- My bootloader is unlocked,
- I've got one sd-ext partition,
Did I missed any new process that 100% require to use flashtool instead of CWM to flash latest ROMs? If so it suck
I don't really understand the issue this time except hardware failure but I don't have any issue of any kind with any previous ROM. No hang, no bootloop...
Any help would be very welcome
Thanks
Have you tried flashing original Stock. tft then flashing?
SevenD2 said:
Have you tried flashing original Stock. tft then flashing?
Click to expand...
Click to collapse
Hi,
Thanks for your reply.
Nope. Never had to do so for any ROM since the day I unlocked my bootloader. And it's a so sudden behavior...
Do you think it could work ? I mean is there any specific reason that it could solve the problem? Does the latest ROMs use some brand new drivers or something else that may require that?
I'll give a try because I've checked my baseband and I'm 70 while you're 83... Am I wrong or some ROM do change the baseband while some other don't ?
I did use flashtool but only to update the baseband. not for flashing custom rom... That may be the problem
I start feeling ashamed LOL !!!
yeah, try flashing the latest firmware / baseband first.
neo2k12 said:
yeah, try flashing the latest firmware / baseband first.
Click to expand...
Click to collapse
Flashing the latest ftf should include the baseband anyway so you shouldn't need to flash separately unless flashing something different.
Yeah I'm sure it will do the trick... I'm definitely noooooob to forgot that baseband stuff... T_T LOL
I'll confirm tonight.
Thanks everyone !
nop
Hi guys,
I've flashed the latest baseband (83) and it didn't change anything!
I've flashed RUSH kernel and install Viper Xperia V4 + modules + baseband 83 libs and it still hang at the same moment. with this ROM it freeze during the boot animation (4th times xperia logo appears if this detail can be useful).
RUSH works fine. Once again if I install Ultimate HD 2.0.3 I've got no issue at all...
I definitely don't understand what's going on...
Odp: Can't install any latest ROM and no I'm not noob !)
Did you flash LT15i ftf or LT18i ftf?
All new ROMs are getting more features and they are getting bigger in size. Arc allocates less space to /system - maybe that's the reason.
When I was on CM10 on LT15i firmware I had about 1MB free space on /system after clean install.
Try flashing LT18i ftf before flashing any custom ROM.
Sent from my Ultimate LT15i using xda app-developers app
michel_666 said:
Did you flash LT15i ftf or LT18i ftf?
All new ROMs are getting more features and they are getting bigger in size. Arc allocates less space to /system - maybe that's the reason.
When I was on CM10 on LT15i firmware I had about 1MB free space on /system after clean install.
Try flashing LT18i ftf before flashing any custom ROM.
Sent from my Ultimate LT15i using xda app-developers app
Click to expand...
Click to collapse
I flashed LT18i one from papayayoghurt
http://goo.im/devs/papayayoghurt/anzu/Basebands
Re: Can't install any latest ROM and no I'm not noob !)
So how did it go?
You okay now?
Sent from my Xperia Arc using xda app-developers app
No I'm not
Flashing LT18i baseband 83 + libs didn't change anything...
Re: Can't install any latest ROM and no I'm not noob !)
Okay.Try doing it this way.
Flash stock 0.587 ftf.
Fast boot kernel that you want.
I presume the ROM that you need is already on your sdcard.
Go into recovery.Wipe data then go to mount/storage- format/system.Then choose the ROM zip and flash.
Tell me what happens.
For now do not choose any other baseband.Just use stock 77 which is included in the stock ROM.
Sent from my Xperia Arc using Tapatalk 2
sandroidnz01 said:
Okay.Try doing it this way.
Flash stock 0.587 ftf.
Fast boot kernel that you want.
I presume the ROM that you need is already on your sdcard.
Go into recovery.Wipe data then go to mount/storage- format/system.Then choose the ROM zip and flash.
Tell me what happens.
For now do not choose any other baseband.Just use stock 77 which is included in the stock ROM.
Sent from my Xperia Arc using Tapatalk 2
Click to expand...
Click to collapse
Ok I'll do so! But I won't be able to do it before EOD Paris time.
Thanks for helping.
No luck...
I've reflashed stock 587.ftf, boot ok on stock at this point.
Then flashed Rush kernel, wiped everything as I used to do and flashed Viper V4...
It's still hanging at the very same point during boot animation! :silly:
Re: Can't install any latest ROM and no I'm not noob !)
im_bol2riz said:
No luck...
I've reflashed stock 587.ftf, boot ok on stock at this point.
Then flashed Rush kernel, wiped everything as I used to do and flashed Viper V4...
It's still hanging at the very same point during boot animation! :silly:
Click to expand...
Click to collapse
Try AOKP m1r3 rom with ArcFusioN4.4 kernel.
Sent from my Xperia Arc using xda app-developers app
sandroidnz01 said:
Try AOKP m1r3 rom with ArcFusioN4.4 kernel.
Sent from my Xperia Arc using xda app-developers app
Click to expand...
Click to collapse
It boots! Does this ring the bell regarding what's happening ?
I'll don"t really mind to give a try to this ROM but I would love to understand what goes wrong
Anyway a big thanks for helping.
Re: Can't install any latest ROM and no I'm not noob !)
Always consider evry custom ROMs instruction. Like in Viper thread, did you note the procedure in flashing the stock firmware?
Sent from my Xperia Arc S using Tapatalk 2
Re: Can't install any latest ROM and no I'm not noob !)
I am pretty sure that there was nothing wrong in all your attempts earlier.
Sometimes flashing a new rom takes a bit too long to boot up.
I do change roms very often but when I first started I had the very same problems that you faced.
We are so eager to use the newest rom that we do not give a chance for it to read the entire stuff that we've got in our device.
Sometimes first boot takes such a very long time.This is where we make our mistake.
We presume its not working.Or there's something wrong with the rom and a host of other things runs thru our head.
I for one was a impatient guy.Not so now.I just leave the phone alone after flashing.Use my secondary,much cheaper phone, till I feel I've given my arc ample time to sync completely with latest rom.
Sent from my Xperia Arc using xda app-developers app
sandroidnz01 said:
I am pretty sure that there was nothing wrong in all your attempts earlier.
Sometimes flashing a new rom takes a bit too long to boot up.
I do change roms very often but when I first started I had the very same problems that you faced.
We are so eager to use the newest rom that we do not give a chance for it to read the entire stuff that we've got in our device.
Sometimes first boot takes such a very long time.This is where we make our mistake.
We presume its not working.Or there's something wrong with the rom and a host of other things runs thru our head.
I for one was a impatient guy.Not so now.I just leave the phone alone after flashing.Use my secondary,much cheaper phone, till I feel I've given my arc ample time to sync completely with latest rom.
Sent from my Xperia Arc using xda app-developers app
Click to expand...
Click to collapse
coldmoonbeam said:
Always consider evry custom ROMs instruction. Like in Viper thread, did you note the procedure in flashing the stock firmware?
Sent from my Xperia Arc S using Tapatalk 2
Click to expand...
Click to collapse
No guys, I'm 100% sure that it sucks. No offense to you but as I've said on my first post I'm not that noob on flashing ROMS, rooting devices... Even if I've left some stuffs due to the time I didn't changed my baseband... Indeed I read each ROM instruction I know the basic rules of the forum. Anyway I either don't take any offense and I understand why you write that...
I did precise at what time the boot process hang but it definitelty goes onto boot loop whatever the recomended kernel has been flashed.
I've left my phone rebooting several times knowing that it won't stop nut just in case, I've also cleaned all caches just before first boot...
Honestly I felt ashamed enough having forget that baseband stuff to not double checked if I did something wrong
I gave another try to Viper ROM some times after successfully boot onto AOKP M1R3 and obtain the same hang and bootloop.
Thanks all :highfive:
Last status...
I managed to install "Xperia T ICS Rom V7.1.0 For Arc / Arc-S" which looks interesting therefore I think I'll keep it.
coldmoonbeam may be right regarding that stock ftf... I did retrieve one from other source and maybe it wasn't the right one compared to the one I've got from Xperia T ICS Rom thread...
I'll try to flash VIPER again now and post the result. Then close the thread.
SOLVED!
That ftf stuff was the problem. It works with the one I used to flash Xperia T ICS Rom.
Thanks all for your help :highfive::good:
Hi guys,as the title says i cannot flah rom.
Well i can flash them but every rom has problem,I tried PAC,CM,SlimBean nothing work(or if it works,no more than one day or 2)
CM gives me MD5 errors,slimBean UI keep crashing,PAC every time i try to flash something in recovery(after flashing the rom)keep rebooting and stays on loop.
I know i mentioned specific roms and whatnot but at this time i don't think it's rom related(or recovery,i tried 3 different recovery),the only thing working flawlessly is the stock rom with root.
You guys have some advice? i've had the phone for about 5 months now and i wanted to try out roms but apparently i can't.
Cheers
Dave
Did you wipe everything when you flash new ROM?
Sent from my LT28h using xda app-developers app
pharix said:
Did you wipe everything when you flash new ROM?
Sent from my LT28h using xda app-developers app
Click to expand...
Click to collapse
the first time with CM no because i followed a guide which didn't.
But with PAC and SlimBean yeah i wiped everything.
The first time with PAC recovery went bad(i guess)and didn't let me wipe or flash anything,i flashed a stock tft repeated the process,the flash worked but as i reboot and tried to flash the on screen button it gave me the same recovery error.
maybe i do something wrong,i came from an HTC desire HD and the whole process was easier and less problematic
Fastboot the opensemc kernel beta2 kernel and then try again. Some people were having problems with flashing and Rayman has fixed it in his kernel apparently
Sent from my 4.2.2 Xperia S via Tapatalk
Ben36 said:
Fastboot the opensemc kernel beta2 kernel and then try again. Some people were having problems with flashing and Rayman has fixed it in his kernel apparently
Sent from my 4.2.2 Xperia S via Tapatalk
Click to expand...
Click to collapse
yep. CM it's now good,i kept following a wrong guide apparently
thanks for the help!