I apologize if this has already been covered but I looked around and couldnt find it and a friend told me they knew someone trying to get it off their phone who bricked their phone trying to so if anyone has done this successfuly
Sent from my SPH-D710 using xda premium
Digglez said:
I apologize if this has already been covered but I looked around and couldnt find it and a friend told me they knew someone trying to get it off their phone who bricked their phone trying to so if anyone has done this successfuly
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Yes, go to the development thread. Both EK02 and EL29 were officially released so both are full modems you can flash through either odin or cwm.
beserker15 said:
Both EK02 and EL29 were officially released so both are full modems you can flash through either odin or cwm.
Click to expand...
Click to collapse
To be more accurate, both were "unofficially" released, so we have the full modems which can be flashed in odin or cwm. When they are "officially" released as OTA updates, we usually only get the patch modems, which won't work in ODIN.
There are links to all the modems (flashable in CWM) in my signature. You need to have a kernel EK02 or newer to flash full modems in CWM else it will hang. If you need an ODIN flashable modem, they are in the 2nd post of each of the respective ODIN links in my signature.
So I should just find a tar and pit for one of those and flash that through odin ? I heard that with eg31 you are unable to change it by flashing through odin and that an ota update was the,only way to really get it off
Sent from my SPH-D710 using xda premium
Digglez said:
So I should just find a tar and pit for one of those and flash that through odin ? I heard that with eg31 you are unable to change it by flashing through odin and that an ota update was the,only way to really get it off
Click to expand...
Click to collapse
If you look at the 2nd post of all the ODIN links in my signature, it will have a link for the ODIN download and the individual tar files for modem, kernel, and ROM. In your case, if you just want the modem, just download the modem. The way I set it up, you ALWAYS use the PDA button for all the downloads. Don't use any other button in ODIN.
What you are reading with EG31 is old information. When EG31 first came out, we didn't have any FULL modems from Samsung/Sprint, so that's why once you had EG31, you couldn't go to any other version, not because you were prevented from doing so, but rather we didn't have any other modems available to flash in ODIN.
Now that we have all the modems, you can go to any modem you want in ODIN. In CWM you can do it also as long as your kernel is EK02 or newer.
Thank you very much that made my day
Sent from my SPH-D710 using xda premium
thanks guys it worked i went with the ek02 nodata mobile odin , it was a little scary cause it hung up on the modem.bin for about 2 minutes but sure enough all went well , thanks guys !
Related
For those that flashed the full EL13 tar and can't use a usb reset jig to erase the download count, flash this through the PDA option in Odin
E4GT Sbl EG31
You sir, are on fire.
Thanks for this, will try when I get home or maybe we can use it with MobileOdin?
curious... is there a issue with the new modem??
No, not related to modem. They ported over their bootloader changes from GSM which don't allow Odin flash count reset.
It is overkill, but the EG30 factory reset tar sticky will also give you back a bootloader which will allow USB jig to reset flash count.
For those that don't work what did you do to get the ! and what setup are you on. Because I was on ek02, flashed calk's el13 rom, flashed the el13 modem, flashed my el13 aio, flashed the stock el13 kernel, odined the stock ek02 kernel with cwm to get cwm mod back, flashed roque el13 kernel and used the jig to reset the counter. No issue at all. I am about to odin the EL13 kernel to see if the jig will work in that scenario.
Awesome I was just thinking about this issue this morning, and was going to ask how to get the old bootloader back. But I'm interested in finding out how crawrj's bootloader didn't seem to change in the steps he took.
Sent from my SPH-D710 using Tapatalk
Just odined rogue el13 and got the !. Used my jig and no !. So it is working fine for me. Only possible difference is the AIO mod but I don't see how that would make a difference.
crawrj said:
For those that don't work what did you do to get the ! and what setup are you on. Because I was on ek02, flashed calk's el13 rom, flashed the el13 modem, flashed my el13 aio, flashed the stock el13 kernel, odined the stock ek02 kernel with cwm to get cwm mod back, flashed roque el13 kernel and used the jig to reset the counter. No issue at all. I am about to odin the EL13 kernel to see if the jig will work in that scenario.
Click to expand...
Click to collapse
If you didn't flash the leaked ODIN tar from sammobile.com (the one with the password to unzip) then you can flash until you are blue in the face and still not have the "privilege" of having a bootloader which doesn't honor the jig.
None of the flashes you described touched the bootloader. You are only flashing modems, kernels, and ROMs.
sfhub said:
If you didn't flash the leaked ODIN tar from sammobile.com (the one with the password to unzip) then you can flash until you are blue in the face and still not have the "privilege" of having a bootloader which doesn't honor the jig.
None of the flashes you described touched the bootloader. You are only flashing modems, kernels, and ROMs.
Click to expand...
Click to collapse
Awesome. Glad I avoided that.
Sent from my SPH-D710 using xda premium
sfhub said:
If you didn't flash the leaked ODIN tar from sammobile.com (the one with the password to unzip) then you can flash until you are blue in the face and still not have the "privilege" of having a bootloader which doesn't honor the jig.
None of the flashes you described touched the bootloader. You are only flashing modems, kernels, and ROMs.
Click to expand...
Click to collapse
Right on. I suspected it was the Odin TAR directly from Samfirmware. Maybe the OP should be updated to make this distinction Calkulin? Could stop people from unnecessary flashes if they don't read the contents of this thread beyond the OP.
you can hard brick your device if you flash an sbl and its interupted, or if you flash one not for the phone. I don't recommend anyone flashing it unless the absolutely need to..
Calk, yousosexy.
Thank you for your amazing work.
Thanks for the file. Flashed with Odin and my USB Jig worked as advertised. Got a new phone this week.
Thanks and keep it up calk. great job!
Calkulin said:
For those that flashed the full EL13 tar and can't use a usb reset jig to erase the download count, flash this through the PDA option in Odin
E4GT Sbl EG31
Click to expand...
Click to collapse
Do you also have a copy of the new boot loader as well? I heard its ok to flash it back after you reset the triangle. Someone else suggested it in another SGSII forum.
Missing Triangle
I went to Caulk's Beta 2 and my yellow triangle has disappeared -- is there a way to check my counter now?
To see the counter just boot in download mode. And to get out of there hold down the power button
Sent from my SPH-D710 using xda premium
If you're on ICS based rom get "Triangle Away" off the Google Play Market. You don't need a jig with this app just root and an ICS rom.
Sent from my SPH-D710 using Tapatalk
pyrostic said:
If you're on ICS based rom get "Triangle Away" off the Google Play Market. You don't need a jig with this app just root and an ICS rom.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
I actually do not have the triangle but in my odin download mode, I see a flash count of 2. Do you know or anyone know if the app will reset that? If not, where's a good place to buy a usb jig to reset my counter...?
Nevermind my question... I checked out the app description and it says that it does reset the odin count. Not only that... I didn't realize that app started from XDA and is offered for free vs the 1.99 cost of the app.
http://forum.xda-developers.com/showthread.php?t=1494114
---------- Post added at 07:23 PM ---------- Previous post was at 06:50 PM ----------
confirmed... ran the app and it reset my counters. this only works on ICS builds... so don't try it on any GB roms... fyi. ty pyrostic
There is now a CWM update.zip to flash the EK02 modem on top of ANY existing modem WITHOUT needing to revert to EG30 first.
Serial flashers rejoice!
update-modem-EK02-FULL-CWM.zip
IMPORTANT: Only EK02 kernels and higher support FULL modem flashes (which these are). Earlier kernels only support PATCH modem flashes. That means you need to be on EK02+CWM or EL13+CWM to run these CWM modem flashes. It has nothing to do with the modems themselves, it has to do with the kernels. If you try to flash FULL modem flashes in earlier kernels it will just hang for a long time and timeout. If you press-and-hold the power button while it is hung (wait 2 minutes before doing that), it'll reboot the phone and you will be on your old modem.
Testing was done using chris41g's EK02+CWM, and EL13+CWM stock repacked kernels (these are the ones installed by the Auto Root Thread) but should work on any stock-derived EK02/EL13-based kernels. Recompiled kernels may or may not work, weren't tested.
I also created CWM update.zip's for EG30, EG31, EK02, and EL13.
They are available in the Resource Section #a13 (2nd post) of the Auto Root Thread and also in my signature.
I've also updated the Wiki DB.
Enjoy!
I am confused. How was this accomplished with only a delta?
Sent from my SPH-D710 using Tapatalk
Damn...I could have used this earlier today to get back to EK02 from EL13. Great work man, this will definitely be helpful.
Sent from The Restaurant at the End of the Universe while drinking a Pan-Galactic Gargle Blaster
Update aborted on me. Still on EG31
Sent from my SPH-D710 using XDA App
RaSanGo said:
Update aborted on me. Still on EG31
Click to expand...
Click to collapse
Which kernel are you using? Are you using CWM? It needs to flash in CWM, not stock recovery.
Just to test your scenario out, I was running
EK02 Modem, EL13+CWM Kernel, EG30 ROM
I booted into CWM recovery and installed EG31 Modem using the first post.
Rebooted the phone, went to menu->about phone, verified EG31 Modem (EL13+CWM Kernel, EG30 ROM)
I ran a speed test over 3G then enabled WiFi and ran a speed test on that. Both were normal.
I then booted into CWM recovery again, and installed the EK02 Modem using the first post.
Rebooted the phone, went to menu->about phone, verified EK02 Modem (EL13+CWM Kernel, EG30 ROM)
Again ran a speed test over 3G then enabled WiFi and ran a speed test on that. Both were normal.
As an aside, with all 4 modems (EG30, EG31, EK02, and EL13) sitting on the /sdcard as full CWM updaters, switching modems has become a breeze. Takes on avg 2.5 minutes including flash and reboot time to switch to any of the modems.
sfhub said:
Which kernel are you using? Are you using CWM? It needs to flash in CWM, not stock recovery.
Click to expand...
Click to collapse
EG31+CWM. Hangs for about 10 minutes then gives a generic error ending in Status 7
Sent from my SPH-D710 using XDA App
RaSanGo said:
EG31+CWM
Click to expand...
Click to collapse
I'll leave my ROM alone since it doesn't affect the flash.
I will go and test your scenario right now.
So you have EG31+CWM *chris41g repack* Kernel and EG31 Modem, correct?
And the current operation that is failing for you is flashing to EK02 modem using the first post?
sfhub said:
I'll leave my ROM alone since it doesn't affect the flash.
I will go and test your scenario right now.
So you have EG31+CWM *chris41g repack* Kernel and EG31 Modem, correct?
And the current operation that is failing for you is flashing to EK02 modem using the first post?
Click to expand...
Click to collapse
Exactly
Sent from my SPH-D710 using XDA App
Starting with EK02 Modem, EL13+CWM Kernel, and EG30 ROM, I downloaded the e4gtauto-sfx.exe packaged from the Auto Root thread in my signature.
I started the Auto Root, Chose Option C (install BootImg), and Option C (EG31+CWM), let phone reboot, went to settings->about phone, verified EG31 Kernel (EG30-CL435803 ie EG30-Rev5).
I now have EK02 Modem, EG31+CWM Kernel, EG30 ROM.
I reboot into CWM and flash EG31 Modem from my signature, here it hangs trying to flash EG31.
That was the kernel I didn't test since I'm never on EG31. Figures that is the one that hangs.
Apparently it doesn't have anything to do with the EK02 modem flash. It won't flash EG31 or EG30 either.
I went back and tested EG30 since I realize I had only tested a patch upgrade from EG30. Now it makes sense. Neither EG30 nor EG31 (built 1 day apart) kernels support FULL modem flashes. They only support PATCH modem flashes. EK02 and EL13 kernels support both FULL and PATCH modem flashes.
My suggestion is to install either EK02+CWM or EL13+CWM from the Auto Root thread in my signature. Then you can flash any of the modems any of the time.
Thanks for the detailed break down. Coming from an OG Evo, things used to be much easier lol
Sent from my SPH-D710 using XDA App
RaSanGo said:
Thanks for the detailed break down. Coming from an OG Evo, things used to be much easier lol
Click to expand...
Click to collapse
Did the Evo support flashing full modems from CWM? I never had one so don't know.
On other platforms I had only seen patch updates also so when Samsung was supporting full updates I was thinking they were pretty on top of things. Apparently they just recently became the cool kids on the block and before they were like the other kids.
You can of course flash the FULL modems over ODIN w/o issues similar to RUU flashes on HTC.
Everything has it's caveats, if you flashed bad radios on the Evo you could potentially lose the phone's WiMax keys, making 4G unusable. ODIN is definitely a blessing for Samsung phones though. The phone is ALMOST unbrickable with Odin.
Sent from my SPH-D710 using XDA App
worked great for me, coming from E31, now able to run E13,
really appreciate it
Do you have to be running Chris's repacked kernel to use this? Does it work with the Rogue kernel and their recovery or you need to flash the stock repack? I am on EL13 and just wanted to know in case I want to roll back unless EK02 modem will flash over EL13 with a problem anyway....
[email protected] said:
Do you have to be running Chris's repacked kernel to use this? Does it work with the Rogue kernel and their recovery or you need to flash the stock repack? I am on EL13 and just wanted to know in case I want to roll back unless EK02 modem will flash over EL13 with a problem anyway....
Click to expand...
Click to collapse
I don't remember the Rogue naming conventions, there was one with a custom kernel and the other with stock repacked. The stock repacked should work as long as it is an EK02 or EL13-based kernel. The custom one may or may not, I don't know, wasn't tested.
Why is this in general?
Sent from my SPH-D710 using xda premium
Real nice now i can switch between ek02 and el13 within minutes
Sent from my SPH-D710 using XDA App
locoboi187 said:
Why is this in general?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
This is General because it is discussion and not a Q&A.
This should be sticky or Wiki if it isn't already. Much thanks sfhub
Sent from my Epic 4G Touch
so i wanted to get to el30 so i flashed to stock to update to ei22 then flash the el30 update.zip
since i started rooting me epic ive had the di18 .tar and always use it to flash to stock
ive done this before and always update normally
but this time it updated to ec05 and now it says im up to date
i have done nothinggg so far
just odined to di18 (as i always doo)
and then updated to ec05
usually the ei22 msg shows up but its not
anyone know what i can do..? is there a flashable ei22 update somewhere..? ive looked but cant find
anyone know how i can get my phone to ota update? ive tried rebooting and updating everything else but android keeps saying its up to date but i know its lying to mee lol
There is a el30 flashable around here don't remember exactly but you should find the ec05.tar not the di18.... try that and you should be prompted to update to ei22 and then to el30
http://forum.xda-developers.com/showthread.php?t=1457734
Here's where you'll find the el30.zip but you need to beon stock ei22
Sent from my SPH-D700 using xda premium
Biggoron said:
There is a el30 flashable around here don't remember exactly but you should find the ec05.tar not the di18.... try that and you should be prompted to update to ei22 and then to el30
http://forum.xda-developers.com/showthread.php?t=1457734
Here's where you'll find the el30.zip but you need to beon stock ei22
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
thanks for the link but ya i already have that file i was trying to get to stock ei22 but my phone wont update to it and i cant find any update.zip for ei22 since i need the actual stock ones
and ive looked for a ec04 tar but couldnt find that either so i just use my di18 one lol
it never does this tho it usually keeps updating till ei22 idk y its stuck on ec05
Find where it says download this tar: it will give you the ec05 tar
http://forum.xda-developers.com/showthread.php?t=1052813
Sent from my SPH-D700 using xda premium
Biggoron said:
Find where it says download this tar: it will give you the ec05 tar
http://forum.xda-developers.com/showthread.php?t=1052813
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
thank you very muchhh
ill flash it and see if i get ei22
it still will work over ec05 right? it shouldnt make a difference?
Biggoron said:
Find where it says download this tar: it will give you the ec05 tar
http://forum.xda-developers.com/showthread.php?t=1052813
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
This^^^^^^^ everyone who uses this tar gets the prompt to update so it should still work.
Otherwise the update zip is linked with qbking's video here:
http://www.youtube.com/watch?v=7H6k-WNcpcA
That will get you to EI22 from stock EC05.
kennyglass123 said:
This^^^^^^^ everyone who uses this tar gets the prompt to update so it should still work.
Otherwise the update zip is linked with qbking's video here:
http://www.youtube.com/watch?v=7H6k-WNcpcA
That will get you to EI22 from stock EC05.
Click to expand...
Click to collapse
thank youu as well
im using odin to flash thaat file
its almost doneif it doesnt give me the update ill deffinately use the update.zip for it
ok so i flashed the ec05 tar and still didnt get the update im gonna use the update.zip file and see what happens
nvm lol i sent the ei22 update.zip to my phone then b4 going to recovery i checked the android updates and it was there so thank you guys for ur help this stuff will be useful to me in the future
I hope hoping to get some discussion going regarding Mobile Odin and how it's working for people on our device.
So far, I've exclusively used it to flash kernels, but has anyone successfully flashed a full TAR with it yet? More specifically, has that full TAR also flashed your modem? I tried flashing a modem.bin file last night using MO, and while it went through the whole process in a way that appeared to be normal, upon reboot baseband was unchanged. I've read about others experiencing the same thing.
According to Chainfire regarding the modem.bin issue ...
Chainfire said:
This maybe a problem specific to CDMA devices... I'm not sure yet though.
Click to expand...
Click to collapse
I also read about some kernel panic mode reports when trying to use MO to flash the latest FC05 TAR.
So if you've used Mobile Odin, please share your successes and or failures. It's obviously a great tool but I'd like to identify where it's working and where it may not, for our device specifically.
I have used it going from ics back to GB ....but have only been flashing eg30 stock tar and then el26 cwm kernel .....then I boot into recovery and flash cm 7 if going to aokp or whatever ....I have tried fc05 & fb27 modem and they don't work it goes to like it is flashing it but finishes real quick like 10 seconds .... And normal Odin takes like a minute or more to flash modem...
Sent from my SPH-D710 using xda premium
I have been using to flash kernels and modems up until FC05. For some reason it will no longer flash modems, like said, it goes through the motions.
Ah, just remembered, used it to flash 27 tar, whole ROM. Flashed modem/kernel/system no issues. Even used it to open that .tar and just flash the modem or kernel once or twice.
The only thing that scares me about MOdin is getting a force close during a flash and hosing my phone.
phatmanxxl said:
The only thing that scares me about MOdin is getting a force close during a flash and hosing my phone.
Click to expand...
Click to collapse
I don't think that's possible. It seems to get the files ready then actually does the flashing on the reboot, as some kind of preboot flash function. When I flash a modem for example, upon reboot a Mobile Odin screen comes up and does stuff then the phone's OS boots.
Sent from my SPH-D710 using Tapatalk
How do you get a recovery after using mobile Odin to flash something like a EL29 tar?
It burns when I Tapatalk....
Beejis said:
How do you get a recovery after using mobile Odin to flash something like a EL29 tar?
It burns when I Tapatalk....
Click to expand...
Click to collapse
After you mobile Odin el29
All the Tars after ek02 are pre rooted .... Install mobile Odin and flash a kernel with cwm ....
Sent from my SPH-D710 using xda premium
Beejis said:
How do you get a recovery after using mobile Odin to flash something like a EL29 tar?
It burns when I Tapatalk....
Click to expand...
Click to collapse
I just flash a repack tar, well have for ics
Can you mix kernels? Like a FB repackaged kernel with a FC ROM?
phatmanxxl said:
Can you mix kernels? Like a FB repackaged kernel with a FC ROM?
Click to expand...
Click to collapse
As long as its ics and only ics ....GB kernels won't work and vice versa
Sent from my SPH-D710 using xda premium
jfcooley said:
I have been using to flash kernels and modems up until FC05. For some reason it will no longer flash modems, like said, it goes through the motions.
Ah, just remembered, used it to flash 27 tar, whole ROM. Flashed modem/kernel/system no issues. Even used it to open that .tar and just flash the modem or kernel once or twice.
Click to expand...
Click to collapse
Hmmm. So it sounds like you can flash a modem as a piece out of a TAR image, but not from a modem.bin file. I've tried the modem.bins for EL29, FC21 and FC27 all with the same result, which is no change.
You can pick parts out of a .tar.
I've had no luck with .bin files either.
Epix4G said:
I have used it going from ics back to GB ....but have only been flashing eg30 stock tar and then el26 cwm kernel .....then I boot into recovery and flash cm 7 if going to aokp or whatever ....I have tried fc05 & fb27 modem and they don't work it goes to like it is flashing it but finishes real quick like 10 seconds .... And normal Odin takes like a minute or more to flash modem...
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Could you link to the pre-rooted EG30 Tar you have? I downloaded this one: http://forum.xda-developers.com/showthread.php?p=20089082#post20089082
and not sure if its pre-rooted. So when I flashed it via Mobile Odin I played it safe and just manually re-rooted via my Mac. I should have just checked to see if it was, but it didn't hit me at the time that a simple terminal command would confirm.
It would be nice to learn how to package things up to flash with mo and avoid recovery all together. Not even sure where to begin on that one.
jfcooley said:
You can pick parts out of a .tar.
I've had no luck with .bin files either.
Click to expand...
Click to collapse
Indeed, but you need to be EXTREMELY careful, like even more so than you do when modifying a .zip file.
.md5, .tar, etc. -- those are risky business to tamper with, unless you can repackage it and sign it correctly after adjusting, removing, and what have you.
Sent from the last remaining Prime; Leader of the Autopads.
Reignzone said:
Indeed, but you need to be EXTREMELY careful, like even more so than you do when modifying a .zip file.
.md5, .tar, etc. -- those are risky business to tamper with, unless you can repackage it and sign it correctly after adjusting, removing, and what have you.
Sent from the last remaining Prime; Leader of the Autopads.
Click to expand...
Click to collapse
I don't think this what he means by "pick parts out of a .tar". I think he means Mobile Odin can select only certain partition elements of a TAR, like just the modem for example. Please correct me if my assumption is wrong.
Sent from my HTC EVO View via Tapatalk
srkmagnus said:
Could you link to the pre-rooted EG30 Tar you have? I downloaded this one: http://forum.xda-developers.com/showthread.php?p=20089082#post20089082
and not sure if its pre-rooted. So when I flashed it via Mobile Odin I played it safe and just manually re-rooted via my Mac. I should have just checked to see if it was, but it didn't hit me at the time that a simple terminal command would confirm.
Click to expand...
Click to collapse
I don't have a pre rooted one ...mobile Odin pro has persistent root .....when you flash it stays rooted and mobile Odin stays installed and ready to flash kernel
Sent from my SPH-D710 using xda premium
Have been using MO Pro with epic success lately going from my DD blazer setup to my ICS test roms.
Sent from my SPH-D710 using xda premium
Dchibro said:
I don't think this what he means by "pick parts out of a .tar". I think he means Mobile Odin can select only certain partition elements of a TAR, like just the modem for example. Please correct me if my assumption is wrong.
Sent from my HTC EVO View via Tapatalk
Click to expand...
Click to collapse
Yes, that's what I meant. Have opened to flash kernel. You just Deselect the modem or system or whatever you don't want.
Epix4G said:
I don't have a pre rooted one ...mobile Odin pro has persistent root .....when you flash it stays rooted and mobile Odin stays installed and ready to flash kernel
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Got it. I knew Pro offers that functionality but thought maybe there was another Tar file that I didn't see. I planned on purchasing Pro to support the developer and will be doing it sooner, rather than later now
Thanks!
Is there any instruction anywhere for flashing fb07 modem from ICS CM9? Sorry I searched but couldn't find any instructions. Should I Odin el26 first? I want to be very cautious to prevent bricking.
Thanks a lot.
kalbear said:
Is there any instruction anywhere for flashing fb07 modem from ICS CM9? Sorry I searched but couldn't find any instructions. Should I Odin el26 first? I want to be very cautious to prevent bricking.
Thanks a lot.
Click to expand...
Click to collapse
If you're just trying to flash the modem, you can download it from calkulin's FB07 thread and flash through Odin. Doesn't matter which ROM you're on.
http://www.buildarom.com/E4GT/Modems/E4GT_Modem_FC07.tar
Here.
kalbear said:
Is there any instruction anywhere for flashing fb07 modem from ICS CM9? Sorry I searched but couldn't find any instructions. Should I Odin el26 first? I want to be very cautious to prevent bricking.
Thanks a lot.
Click to expand...
Click to collapse
You can flash a modem via the cwm included with CM9. I've done this many times, no need to wipe anything
Sent from my SPH-D710 using Tapatalk
Cool...thanks for the help
That answered my question too, might try it on mobile Odin as well.
Sent from my SPH-D710 using xda premium
JasonK75 said:
That answered my question too, might try it on mobile Odin as well.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I've had issues with flashing modem's via Mobile Odin. The first time the process went through "successfully" to find out that the baseband version never changed. The second time my phone froze forcing a battery pull and going into recovery manually ultimately for the same result as the first try. (TAR files were verified download correctly)
PC Odin worked like a charm, the first time.