Hi,
The HTC Explorer has a Adreno 200 GPU such as the Desire. Maybe we can use their lib for ICS ? Also with the same GPU, on gingerbread, it gets 800 in 3d score with Antutu benchmark... Why ? Maybe it has a boosted Adreno 200 ?
because it has lower resolution
cartmanotfat said:
Why ? Maybe it has a boosted Adreno 200 ?
Click to expand...
Click to collapse
It has lower ppi screen.
Sent from my HTC Desire using Tapatalk
it has also lower dots per inch
But if it get ICS, can we use their lib ?
cartmanotfat said:
But if it get ICS, can we use their lib ?
Click to expand...
Click to collapse
If you wanna brick your phone , yes .
Herpderp Adreno + Tegra.
Related
Hello, i trying play GTA III on my ZTE Blade (CM7, no OC), but its lags...
Is any chance to Version for LOW-Devices ? with graphics downgraded etc.
Thanks, and sorry for my bad ENG...
mmm273 said:
Hello, i trying play GTA III on my ZTE Blade (CM7, no OC), but its lags...
Is any chance to Version for LOW-Devices ? with graphics downgraded etc.
Thanks, and sorry for my bad ENG...
Click to expand...
Click to collapse
have u tried it with chainfire
no... but this mobile have only 600Mhz CPU and Chainfire need 1ghz+ ...
i dont think its work
mmm273 said:
no... but this mobile have only 600Mhz CPU and Chainfire need 1ghz+ ...
i dont think its work
Click to expand...
Click to collapse
no its not necessary i m using it gangster MV used to be slow but after using it and OC 729 it has improved a lot.try it gameplay might improve.
Go to andropalace.blogspot.com they have it modiefied for lower end phones
Sent from my HTC_A510c using xda premium
cpie20 said:
Go to andropalace.blogspot.com they have it modiefied for lower end phones
Sent from my HTC_A510c using xda premium
Click to expand...
Click to collapse
they have just modified it for qvga and hvga resolution not any gameplay improvement to remind you blade have a wvga screen but the game runs slow
I tried Chainfire - still lags
Tried another ROM - still lags
Tried tweak with delete "audio" folde - still lags ( less )
Tried OC to 704 Mhz - still lags
Nothing Work !!!! Still dont playable ....
I hope for graphics downgraded version ...
cpie20 said:
Go to andropalace.blogspot.com they have it modiefied for lower end phones
Sent from my HTC_A510c using xda premium
Click to expand...
Click to collapse
Thanks for the link!
GTA 3 RIP works on my Blade with cpu OC to 710 mhz. Quit lagging but playable.
Try Elite Movil 2.3.5 s2 + ChainFire + PoverVR
ill try RIP version , performace incerased but still not playable /for me/ ...
sqbo- Know skype name - kllr007 - ? but I think I know you !!
ROM Elite Movile 2.3.5 s2
youtube.com/watch?v=Pez66I-4s1U&feature=colike
I'm playnig this with chainfire + OC to 748MHz with gingerSF r3 = almost no lagging whatsoever
Can one of you post links to all files needed to run Gangstar?
Sent from my Blade using XDA app
karthiknr said:
Can one of you post links to all files needed to run Gangstar?
Sent from my Blade using XDA app
Click to expand...
Click to collapse
actually west coast huddle runs smooth but Miami still lags a lot(even at 806 OC)
saaransh9 said:
actually west coast huddle runs smooth but Miami still lags a lot(even at 806 OC)
Click to expand...
Click to collapse
806MHz?? You shouldn't overclock so much, 748MHz is max if you dont want to kill your phone.
Try to delete sounds and use chainfire, it should add some fps
EvilBrains said:
806MHz?? You shouldn't overclock so much, 748MHz is max if you dont want to kill your phone.
Try to delete sounds and use chainfire, it should add some fps
Click to expand...
Click to collapse
i did try chainfire but there was no big difference i will try deleting sound files.
saaransh9 said:
i did try chainfire but there was no big difference i will try deleting sound files.
Click to expand...
Click to collapse
I think you might find a stripped version of data for weaker phones on the internet, that should work even better
hi all, trust you are doing fine. i recently flashed a CM7 rom, (yey ! noob ) and would like to overclock my device.. Do i need to install app like CPU master or SET cpu or it would be better just to use the CM7 settings then -> performance to overclock. hope you guys could help me out..
Thank in advance
Okay... after getting your answer what was the need to post again?
Sent from my HTC Wildfire using xda premium
He asked what was better...
I think it's better to overclock via CM settings, but for any other ROM you must use SetCPU or simmilar apps to overclock
tin_95 said:
He asked what was better...
I think it's better to overclock via CM settings, but for any other ROM you must use SetCPU or simmilar apps to overclock
Click to expand...
Click to collapse
check out android development post of his.. That is the same as this one and I had already answered to this one there...
Sent from my HTC Wildfire using xda premium
.xxx. said:
Okay... after getting your answer what was the need to post again?
Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
because maybe I'm on the wrong area hehe,
Sir, please help me here. This is why i'm asking this question because i can't overclock my wildfire, after i set it with maximum to 768 mhz and minimum to 710 mhz, playing fruit ninja is still all laggy.
here's some specs of my phone:
HTC wildfire
CM7 stable (7.1.0.1-buzz)
Android version: 2.3.7
Kernel: [email protected] #1
S-off with revolutionary
thanks in advance sir
tin_95 said:
He asked what was better...
I think it's better to overclock via CM settings, but for any other ROM you must use SetCPU or simmilar apps to overclock
Click to expand...
Click to collapse
thanks for your info sir and noted on this one
19iceman32 said:
hi all, trust you are doing fine. i recently flashed a CM7 rom, (yey ! noob ) and would like to overclock my device.. Do i need to install app like CPU master or SET cpu or it would be better just to use the CM7 settings then -> performance to overclock. hope you guys could help me out..
Thank in advance
Click to expand...
Click to collapse
hello dude... I will give u the clear idea...
u can use both Set CPU or Inbuilt setting in CM...... but the difference is that "set cpu" or any other similar tools will have the option of making profiles... that is the only advantage, so u can go for anyone thats not a problem, but i suggest SETCPU..
And u cannot overclock above 691Mhz in cm 7.1.0.1... if u do so, then it will stuck up.. so i use max - 672 & min - 2XX... with "on demand" profile in SETCPU.. It runs quite smoothly.....
All the best...
balaedge said:
And u cannot overclock above 691Mhz in cm 7.1.0.1... if u do so, then it will stuck up.. so i use max - 672 & min - 2XX... with "on demand" profile in SETCPU.. It runs quite smoothly.....
All the best...
Click to expand...
Click to collapse
Just because you can't doesn't mean others can't, I run perfect at 788 and know others do too.
Its the tolerance of your CPU which determines how fast you can o/c not the rom.
Sent from my HTC Wildfire using xda premium
oh if it is true sorry for that... but here we 3 people using that rom in htc wildfire, cant o/c above 691... and also a friend of mine who had same problem as above, but he can able to o/c at 768Mhz in a different rom (not cm 7.1.0.1 as we used).. think its rooted wildfire with android 2.2..
balaedge said:
oh if it is true sorry for that... but here we 3 people using that rom in htc wildfire, cant o/c above 691... and also a friend of mine who had same problem as above, but he can able to o/c at 768Mhz in a different rom (not cm 7.1.0.1 as we used).. think its rooted wildfire with android 2.2..
Click to expand...
Click to collapse
Scratch is totally correct.stable Overclocking is totally CPU dependent and doesn't matter which rom ur using. Now you might not be able to o/c some roms due to the KERNEL!!!
I can overclock also to 768 but seems my phone works best at 633.
balaedge said:
hello dude... I will give u the clear idea...
u can use both Set CPU or Inbuilt setting in CM...... but the difference is that "set cpu" or any other similar tools will have the option of making profiles... that is the only advantage, so u can go for anyone thats not a problem, but i suggest SETCPU..
And u cannot overclock above 691Mhz in cm 7.1.0.1... if u do so, then it will stuck up.. so i use max - 672 & min - 2XX... with "on demand" profile in SETCPU.. It runs quite smoothly.....
All the best...
Click to expand...
Click to collapse
sir thank you for your given info.
Scratch0805 said:
Just because you can't doesn't mean others can't, I run perfect at 788 and know others do too.
Its the tolerance of your CPU which determines how fast you can o/c not the rom.
Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
i'm a little bit confused.. @[email protected]
which is which sir ? do i need to flash another kernel ?
No....... just leave the kernel alone, the chances of you being able to o/c anymore than you can already are slim + you probably wouldn't even notice the difference in speed anyway.
Also fruit ninja doesn't work for me either, its probably because we have no gpu.
Sent from my HTC Wildfire using xda premium
what would be the best and safe clock speed for one v
1024mhz
Hit thanks if I helped u!!!
1.5 with smartass and bfq
Sent from my One V
I usually leave it at 1.2 with SmartAssV2 and SIO.
gskishan004 said:
what would be the best and safe clock speed for one v
Click to expand...
Click to collapse
Depends on the ROM. Right now I'm on SlimBean and I can keep it low at 1 mHz and It plays game like a charm. However on other roms I had to run at 1.5 to get games to work.
I m on CM10 1200 MHz is enough for average use but if u play games like high graphical interference I switch to smartassv2 and 1401 MHz
Games run like wow
Always deadline
Don't use performance governor too much . As I have seen it written somewhere its bad for ur processor ..
Sent from my One V using xda app-developers app
hey guys recently i have noticed something while benchmarking.....my max cpu frequency is locked at 1.3 ghz...i use xm 305 with arhd 21 and if i set my max freq to 1.5 ghz with performance governor on so it should clock my cpu to 1.5 ghz regardless what i do right????but my cpu is still displayed to be at 1.3 ghz(its displaying in trickster app info page)
i tried setting min freq to 1.5 ghz and it is still clocked at 1.3 ghz???
because of that i am kinda lagging in vice city and getting a little low score in benchmarking....
so should i reflash the kernel??or use different app?
Turn power saving off
Sent from my HTC One X using xda app-developers app
Stefan0vic said:
Turn power saving off
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
it is off -_-...still turned on and off again and my phone is still at 1.3 ghz -.-
aseferfan said:
it is off -_-...still turned on and off again and my phone is still at 1.3 ghz -.-
Click to expand...
Click to collapse
if you use Set-Cpu see if u have some Profile on that cap cpu at 1.3Ghz
It's XM305 that is at fault. On ARHD21 and XM305 I, and others, have frequency locked at 1.3GHz.
XMister isn't available until September I think when he should return.
Change kernel and all should be well.
Tigerlight said:
It's XM305 that is at fault. On ARHD21 and XM305 I, and others, have frequency locked at 1.3GHz.
XMister isn't available until September I think when he should return.
Change kernel and all should be well.
Click to expand...
Click to collapse
ah,thought so.......
so i guess all xm version have this problem?or is there a version which doesnt have this...?
also your using trip's kernel...is this the thread?
http://forum.xda-developers.com/showthread.php?t=2307051
gonna try trips kernel
aseferfan said:
ah,thought so.......
so i guess all xm version have this problem?or is there a version which doesnt have this...?
also your using trip's kernel...is this the thread?
http://forum.xda-developers.com/showthread.php?t=2307051
gonna try trips kernel
Click to expand...
Click to collapse
No, not all of them do. I know for a FACT #285 works fine because I was using that before #305.
I tested #303 and #304 and they had the same issue.
Beyond that I don't know.
I tested Trip's NEXT Tegra 4, very nice and fast, but found the battery usage a little high and it's a little light on features, no S2W or LP OC for example.
ATM I am using n3okernel v44 and very happy with it.
Tigerlight said:
No, not all of them do. I know for a FACT #285 works fine because I was using that before #305.
I tested #303 and #304 and they had the same issue.
Beyond that I don't know.
I tested Trip's NEXT Tegra 4, very nice and fast, but found the battery usage a little high and it's a little light on features, no S2W or LP OC for example.
ATM I am using n3okernel v44 and very happy with it.
Click to expand...
Click to collapse
ah,thanks for the info :good:
guess i will try n3o's ncx and trip kernel
aseferfan said:
ah,thanks for the info :good:
guess i will try n3o's ncx and trip kernel
Click to expand...
Click to collapse
Try trickster mod to change the cpu speed.
Sent from my HTC One X using xda app-developers app
treebill said:
Try trickster mod to change the cpu speed.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Trickster, SetCPU, fauxClock, System Tuner, they will all let you SET max CPU speed to 1.5GHz but there is something in the kernel clock-locking some CPU's at 1.3GHz and until XMister returns...
Hello everybody!
Have anyone overclocked gpu on xperia s? I want to know how phone working and is any problems with it? I don't want to burn my motherboard.
Sent from my LT26i using xda premium
I've overclocked mine using Trinity's kernel without any problems
Sent from my Xperia Slow LT26i
You need a unlocked bootloader
And a custom kernel
I recomend
Trinity kernel for general performance
Forzaferrarileo for a great balance
And doomkernel for stability and balance
Sent from my LT26i using XDA Premium 4 mobile app
I use DooMKerneL and kernel tuner app to overclock gpu to upto 320Mhz.. and yeah, you need to have bootloader unlocked..
Sent from my LT26i using xda app-developers app
mnashfaq said:
I use DooMKerneL and kernel tuner app to overclock gpu to upto 320Mhz.. and yeah, you need to have bootloader unlocked..
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
can u post here a diffrence between stock mhz and oc-ed one?? Im curious how much power does that give
Im ising pureslim 4.4 now so no oc for me now but just asking ;p
200mhz 2d
266mhz 3d
As oposed to
266mhz 2d
320mhz 3d
With an OC your ui will become smoother and games will lag less
Also some benchmarking apps prove that you can beat a samsung galaxy s3
Sent from my LT26i using XDA Premium 4 mobile app
UlvarinPL said:
can u post here a diffrence between stock mhz and oc-ed one?? Im curious how much power does that give
Im ising pureslim 4.4 now so no oc for me now but just asking ;p
Click to expand...
Click to collapse
There you go.. say thanks to envious_data.. couldn't have explained it better.. Normally the clock for,
2D - 200Mhz
3D - 266Mhz
But we can overclock gpu to obtain,
2D - 266Mhz
3D - 320Mhz
Phone will run with no lag at all.. And it's super smooth.. I haven't tested it's effect on the battery yet though.. I don't actually use it much.. Unless if I want to play Asphalt 8 without lag..
Hope you understood..
Thank me if I helped..
mnashfaq said:
There you go.. say thanks to envious_data.. couldn't have explained it better.. Normally the clock for,
2D - 200Mhz
3D - 266Mhz
But we can overclock gpu to obtain,
2D - 266Mhz
3D - 320Mhz
Phone will run with no lag at all.. And it's super smooth.. I haven't tested it's effect on the battery yet though.. I don't actually use it much.. Unless if I want to play Asphalt 8 without lag..
Hope you understood..
Thank me if I helped..
Click to expand...
Click to collapse
the effect on battery is almost un noticable,
this is because its a small change (as oposed to a cpu oc (much higher frequencys and higher voltages required)
xperia s uses gpu and cpu to display
and finaly most kernels with a gpu oc usualy have a gpu undervolt meaning per frequency step it uses less power as oposed to stock
<(｀^´)> knowing is good!!!
Sent from my LT26i using XDA Premium 4 mobile app
Envious_Data said:
the effect on battery is almost un noticable,
this is because its a small change (as oposed to a cpu oc (much higher frequencys and higher voltages required)
xperia s uses gpu and cpu to display
and finaly most kernels with a gpu oc usualy have a gpu undervolt meaning per frequency step it uses less power as oposed to stock
<(｀^´)> knowing is good!!!
Sent from my LT26i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I get this problem sometimes.. My 2D gpu frequencies cannot be changed.. it might be because of mp-decision but isn't DooMKerneL supposed to have its own mp-decision? if i cant get past this problem, can you give me a link to the latest trinity kernel for Xperia S..? If its not asking for too much..
mnashfaq said:
I get this problem sometimes.. My 2D gpu frequencies cannot be changed.. it might be because of mp-decision but isn't DooMKerneL supposed to have its own mp-decision? if i cant get past this problem, can you give me a link to the latest trinity kernel for Xperia S..? If its not asking for too much..
Click to expand...
Click to collapse
doomkernel doesent have 2d overclock
doomkernel used the stock mpdecision
also no need for a 2d oc unless you dont like laggy opengl based games