Hello!
I have rooted my Archos G9 (thanks to all who made this possible). I want to try to make the adhoc wifi work. Unfortunately, It would not work, although I've tried several instructions.
My question is therefore: Does anyone know of a way to make the adhoc wifi work on the Arcos G9?
Thanks in advance Peppi
Have you rooted?
If yes, try an app that does it from the market
Sent from my ARCHOS 80G9 using xda premium
view this WiFi Ad Hoc enabler on android market
Hello!
Thank you for the answers. In the marker I found this:
ZT-180 Adhoc switcher; When I launch the application, asks me the "Super User" if I want to give her root-right, when I said yes, says the Superuser you are given su-right, but the application says: the tablet is not Rooted.
and this: WiFi Ad Hoc enabler;
This application aborts with an error message.
The tablet is Rooted and set rw, I can copy system files in the terminal, move, rename, what I want, and also runs the Rootexplorer.
Maybe I can just not use the programs will not. If someone can help me I would be very grateful.
Thank you Peppi
I can not try these programs that I lent the tablet to my brother. but in the past I have tried a couple of programs (rooted firmaware). at most I could see the ad-hoc wifi, but there was no way to connect. maybe it depends on the wifi chip. for the moment I can not use "connectify" on winzoz :-( ciao
peppippank said:
Hello!
Thank you for the answers. In the marker I found this:
ZT-180 Adhoc switcher; When I launch the application, asks me the "Super User" if I want to give her root-right, when I said yes, says the Superuser you are given su-right, but the application says: the tablet is not Rooted.
and this: WiFi Ad Hoc enabler;
This application aborts with an error message.
The tablet is Rooted and set rw, I can copy system files in the terminal, move, rename, what I want, and also runs the Rootexplorer.
Maybe I can just not use the programs will not. If someone can help me I would be very grateful.
Thank you Peppi
Click to expand...
Click to collapse
I have the same problem, I know I'm rooted, so I'm not sure why it thinks I'm not
Yesterday I tried WiFi Ad Hoc enabler 1.8. it broke the wifi completely! Luckily, it makes a system's files backup before, then one can restore the original files. ciao
I have the same problem over here...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is there any possibility to access to adhoc wifi (in my case its via joikuspot on symbian)?
I had the same issue connecting my tablet to my phone. I ended up using 'pdanet tablet' on my g9 and foxfi on my android phone to get on the internet. It uses a Bluetooth or WiFi connection and is not adhoc but it does the job. I know it's not what was asked but it is a workaround. Hope this info helps.
Sent from my x10i using dixperia 8 + tapatalk :-D
Related
I recently purchased an AR Drone from Parrot, and am trying to connect it to my EVO (rooted, running MikFroyo 4.5). It seems that the EVO cannot recognize the ad-hoc network that the Drone broadcasts. Is there a ROM or kernel that I could use to allow it to detect an ad hoc wifi network?
I'd rather not apply an infrastructure patch to my brand new drone, instead just messing with the phone I mess with all the time. Any help is much appreciated. Thanks in advance!
Answered my own question
Well, I just answered my own question, and figured I'd share with everyone else. I just tested this at my local Brookstone store (I'm friends with the store manager) and was able to fly theirs as well as my own.
From what I've done, the process to make any ROM Ad-Hoc compatible is pretty simple, although you do need adb.
First step, go into a command window, and with your phone connected to your computer run "adb shell wpa_supplicant -v".
This will spit out some information regarding the wpa security measures in place on your particular ROM. What we are looking for is the set of numbers it shows.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
See where it says 0.5.11? That's what we want. It could also show 0.6.xx. Either way, that determines which of these zip files you should flash onto your phone. After it is flashed, your phone will be able to recognize and connect to Ad-Hoc networks, they will be displayed in the WiFi setting menu as (*)NETWORK_NAME.
If you are showing a 0.5.xx number download the file "wpa_adhoc-signed.zip"
If you are showing a 0.6.xx number download the file "wpa6_adhoc-signed.zip"
Last second notes: This works on ALL phones and ALL ROMs, you do need to check the wpa_supplicant data on each phone and ROM, it is usually different per unique setup. Also, the app I used to fly the Parrot AR.Drone is free, it is called AR.Pro Lite and is on the Android Market for any phones that are already Ad-Hoc capable or enabled.
That should be it, go out and see the (more) complete world of WiFi, and enjoy your new toy if you so wish!
http://www.brookstone.com/ipod-acce...er.html?bkiid=electronics|mn_flash|652479p|s2
Ad-Hoc Network Detection
After Installation my WiFi did not working... :/
WIFI turninng on .... ERROR
Afternoon all
I've bit the buillet and finally picked up a SGN and I must admit im blown away
I do have 1 niggly little issue though, I cant seem to get the damn MTP to work on my Office PC (XP 32bit waaaay underpowered) and all for the sake of getting a ROM on there
Managed to use the Gnex tools to Unlock the BL, root and Flash CWM but I cant seem to copy any files over to the "SD Card" keeps bringing up and error saying;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when it tries to install the MTP drivers, regardless of USB Debugging being enabled or disabled
and I cant mount the USB in CWM either, brings up an error like 'e:Unable to opem UMS lunfile (No such file or directory)'
Having had a poke around I cant seem to find a solid 'yes do this' or 'No your boned'
any help is muchos appreciato!
This is because the Galaxy Nexus doesn't support UMS mode anymore, since it no longer has a partition exclusively for media, so it can't mount it. MTP or PTP is what is used to transfer files via usb now.
Try see if there's any 3rd party programs that let you use MTP, Google provided one for download for linux and mac iirc.
If your PC doesn't support MTP try Airdroid from the market. It gives you access to your phone over a wifi connection using your browser.
Dang! Looks like (since this PC is naff) Ill be transfering the .zips to my SGN tonight on my Mac, ah well it be rite lol
Thank You!
I was able to plug and play on my XP machine.
Also, cwr doesn't support mounting yet on the gnexus.
Sent from my Galaxy Nexus using XDA App
Wifi Explorer is nice too. That's what I use to transfer between devices.
LTE EX Galaxy Nexus - 4.0.3 AOSP
Asus Transformer - Revolver OC/UV
Hey guys.
I'm looking for a faster way to transfer files from my PC to my GNex. MTP is way too slow (2.5 gigs is looking to take about 3 hours) and I don't have the patience.
Is there a good wifi transfer app to do this for me? I am not good with networking, so easy would be good. I bought "wifi file transfer" from the market and it works good for single files. I need something that will do my whole internal SD in a single shot.
Halp?
Airdroid or ftpserver
rudeguy said:
Hey guys.
I'm looking for a faster way to transfer files from my PC to my GNex. MTP is way too slow (2.5 gigs is looking to take about 3 hours) and I don't have the patience.
Is there a good wifi transfer app to do this for me? I am not good with networking, so easy would be good. I bought "wifi file transfer" from the market and it works good for single files. I need something that will do my whole internal SD in a single shot.
Halp?
Click to expand...
Click to collapse
I am not sure that a WiFi transfer will be faster than using a wired transfer method. Try pulling the data using ADB
ahmadallica said:
I am not sure that a WiFi transfer will be faster than using a wired transfer method. Try pulling the data using ADB
Click to expand...
Click to collapse
I suck at adb
what command would I use? adb pull wholedamnthing?
rudeguy said:
I suck at adb
what command would I use? adb pull wholedamnthing?
Click to expand...
Click to collapse
Something like that, yes
Sent from my i9250
rudeguy said:
I suck at adb
what command would I use? adb pull wholedamnthing?
Click to expand...
Click to collapse
Check the last post here
https://play.google.com/store/apps/details?id=ch.ctrox.filepush
http://forum.xda-developers.com/showthread.php?t=1724143
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I use it all the time .
Hello guys
I rooted my tab s 10.5 LTE version yesterday. Everything worked good, root was there, SU also, so that's nice.
After that, I downloaded xposed frameworke and added de XSecure (that xposed can work with private mode) and i changed the platform.xml.
I tried to open private mode, than it says that it can't connect or it isn't activeted (something like this). So I can't access the private mode anymore.
Anyone else having this problems? Or maybe a solution for it?
Thank you for help! :highfive:
Tkkg1994 said:
Hello guys
I rooted my tab s 10.5 LTE version yesterday. Everything worked good, root was there, SU also, so that's nice.
After that, I downloaded xposed frameworke and added de XSecure (that xposed can work with private mode) and i changed the platform.xml.
I tried to open private mode, than it says that it can't connect or it isn't activeted (something like this). So I can't access the private mode anymore.
Anyone else having this problems? Or maybe a solution for it?
Thank you for help! :highfive:
Click to expand...
Click to collapse
Meh. Probably no solution for it. Might be caused by root from what I heard ?
[Old question, but now is answered!]
-DUHA
DUHAsianSKILLZ said:
Meh. Probably no solution for it. Might be caused by root from what I heard ?
[Old question, but now is answered!]
-DUHA
Click to expand...
Click to collapse
You are my hero man ??
Just because it is fixed in the latest ironrom?
Tkkg1994 said:
Hello guys
I rooted my tab s 10.5 LTE version yesterday. Everything worked good, root was there, SU also, so that's nice.
After that, I downloaded xposed frameworke and added de XSecure (that xposed can work with private mode) and i changed the platform.xml.
I tried to open private mode, than it says that it can't connect or it isn't activeted (something like this). So I can't access the private mode anymore.
Anyone else having this problems? Or maybe a solution for it?
Thank you for help! :highfive:
Click to expand...
Click to collapse
Here :highfive:
Skip typing - hit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
instead..
Hello.
I've never been up to date with modifications of all the FireTV Sticks, but recently found here some threads and bad things that OS updates bring/block and I'd like to ask for advice.
My device is as on the screenshot, OS version 5.2.8.4 and with an information in settings, that the update has been downloaded and to be installed when device idle. I disconnected it from power source and seek what are my options and what You'd do to make the best out of this Stick.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is awesome, but is there anything for FireTV Stick II ?
https://www.reddit.com/r/fireTV/comments/kl1y7z
Would this LeanBack and TVLaunchX work or should I go for WolfLanucher/LauncherManager?
1. I'd like to install a launcher (Wolf?) to speed things up. Is this possible with this OS or should I downgrade?
2. can I still disable OTA updates and stay on this OS version, or should I downgrade?
3. I dont use voice input, don't mind rooting
4. I mainly use the Stick with Kodi
5. I bought a OTG 3xUSB cable and it would be awesome if I could connect a 200GB HDD 2,5" but it doesnt work both because insufficient power supply (doesnt boot when connected) and I read that it needs to be FAT32 formatted. Can I somehow bypass that FAT32?
6. doesn't matter if FAT32 or NTFS, can I somehow share this HDD connected to FireTV via my Wi-Fi, to upload media from my PC to that hard disk?
If you have knowledge about any single thing above, pls share your thoughts or links. Thanks!
2. Exact moment with solution plus website. Also a solution, if the update has been downloaded and awaits install
https://www.techdoctoruk.com/block-updates-on-amazon-devices-new-method/
5. This gut explains it. At least 2A power supply and FAT32 is a must
https://www.reddit.com/r/firetvstick/comments/bimiwc/_/enbxqgu
6. Usefull info here. Running samba share only on rooted ROM as it requieres blocked ports. Migrating files should be easy with a FTP server that can be easly started with EsFileExplorer
https://www.reddit.com/r/fireTV/comments/4jjyi4
The file size limit of 4GB really bothers me with FAT32. I'll look for other solution but I'm against running my PC as a server. Will look if my router can handle file sharing