Related
So far fresh users can't post in development forum, I make post here.
maybe moderators can move this topic...
This is custom recovery for Optimus Me P350 based on AmonRA-GNM 2.2.1
How to install:
1. Yes, you need to have root GingerBreak APK
2. Download zip file in attachment and unpack, you get 3 files:
- recovery-RA-pecan-2.2.1-GNM-drap.img
- flash_image
- md5sum
3. check md5sum
Code:
md5sum -c md5sum
4. copy .img file and flash_image to sdcard
Code:
adb push recovery-RA-pecan-2.2.1-GNM-drap.img /sdcard/
adb push flash_image /sdcard/
5. login, remount /system in rw mode and "install" flash_image util
Code:
adb shell
$ su
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
# cat /sdcard/flash_image > /system/bin/flash_image
# chmod 755 /system/bin/flash_image
# sync
6. and last but not least, flash it
RECOMMENDED
because there sometimes not enough virtual ram, it is recommended reboot phone before flashing
Code:
adb shell
$ su
# flash_image recovery /sdcard/recovery-RA-pecan-2.2.1-GNM-drap.img
# sync
7. reboot
Code:
# reboot recovery
Profit!
Update:
Now with custom recovery you can install customized linux kernel
Sources on Github
This is custom recovery for Micromax A60 based on AmonRA-GNM 2.2.1
DO NOT USE IT FOR LG P350
Is there a advantage to using this recovery over milks clockwork???? Or original recovery thunderdog?????
Sent from my LG-P500 using XDA Premium App running CM7 over clocked at 787
dislplin01 said:
Is there a advantage to using this recovery over milks clockwork???? Or original recovery thunderdog?????
787
Click to expand...
Click to collapse
No, you can't use it on P500 this is only for P350,
a post here because the is no forum for 350,
not yet ;-) I hope it comes in near future.
You did a great job mate. Finally,LG Optimus Me/Life(P350) is starting to get hacked.
thank you!!!
drapalyuk said:
No, you can't use it on P500 this is only for P350,
a post here because the is no forum for 350,
not yet ;-) I hope it comes in near future.
Click to expand...
Click to collapse
Good to know thanks
Sent from my LG-P500 using XDA Premium App running CM7 over clocked at 787
any custom roms for this device?
Pecamod for LG Optimus Me
Pecamod v0.5
FEATURES::
# Android 2.2.2 (V10F)
# root and BusyBox
# Deodex & Zipalign apks
# HW acceleration enabled + JIT enabled
# Heap size = 40MB
# Franciscofranco's tweaks applied on boot
# Script for SD-card
# Patch Hosts file
# Patch libsqlite.so
# Ad-hoc Wi-Fi
# New sound
# Front Honeycomb
megaupload . com/ ?d=J4L72S1K
Have you tried it? Is it good?
I from Russia. I make this ROM. This ROM is good....IMHO. Create backup and flash this rom)
I use p500 and my sister use p350..
She ask me for repair her optimus-me about memory drain, so i answered that nothing i can do for her phone.
So, Is this rom can help me?
Sent From a Long Time ago...
I can't register to the russian forum to get the recovery
EDIT: I got it. Thank you!
dislplin01 said:
Is there a advantage to using this recovery over milks clockwork???? Or original recovery thunderdog?????
Sent from my LG-P500 using XDA Premium App running CM7 over clocked at 787
Click to expand...
Click to collapse
lol
Sent from my... you know the rest.
method77 said:
I can't register to the russian forum to get the recovery
Click to expand...
Click to collapse
recovery in first message of this topic Custom Recovery AmonRA-GNM 2.2.1 for Optimus Me P350
drapalyuk said:
This is custom recovery for Micromax A60 based on AmonRA-GNM 2.2.1
DO NOT USE IT FOR LG P350
Click to expand...
Click to collapse
Well just now i have also tested it ant it works.
If you please let me know the fix it will be great, I am asking this because keys isn't matching as expected.
Also can you share the source code or the branch you have used?
Screenshots my ROM
help me i want to install recovery on P350
someone can give me tutorial how to use ADB on P350, it is same with P500??
or i can use Terminal-Emulator?
Please help me..
Sorry for my bad english.
ngage_me said:
Well just now i have also tested it ant it works.
If you please let me know the fix it will be great, I am asking this because keys isn't matching as expected.
Also can you share the source code or the branch you have used?
Click to expand...
Click to collapse
sure, i just need to clean up a lite bit remove tons of debug outputs
cupliz said:
someone can give me tutorial how to use ADB on P350, it is same with P500??
or i can use Terminal-Emulator?
Please help me..
Sorry for my bad english.
Click to expand...
Click to collapse
1. yes adb work similar for all android devices
2. and yes, you can use terminal emulator to execute commands
and just copy files to sd card in usual way
in our case we use adb to copy a files and for remote shell
some basic information about adb
Many of you seem to think that you have been abandonded by the developers moving to the GT-I9100, I do not think this is the case, but you have to remember that developing for a new phone is more fun
Anyway, some of you will already know about my insecure kernels for the GT-I9100, well since Gingerbread on the GT-I9000 I have also been using insecure kernels for my own personal use and have now decided to release them, since if you are like me and like to keep your phone as close to stock as possible they may be of some use to you.
If you like my work, maybe you would like to say thanks by buying me a beer
Insecure Kernels:-
GT-I9000_XWJVZ_insecure
GT-I9000_XWJW1_insecure
GT-I9000_XXJVP_insecure
GT-I9000_XXJVQ_insecure
GT-I9000_XXJVR_insecure
GT-I9000_XXJVS_insecure
GT-I9000_XXJVT_insecure
GT-I9000_XXJVU_insecure
GT-I9000_XXJW4_insecure
password = [email protected]
a quick method for rooting would be:-
Code:
adb remount
adb push busybox /system/xbin/
adb push su /system/xbin/
adb shell chown root.shell /system/xbin/busybox
adb shell chown root.shell /system/xbin/su
adb shell chmod 755 /system/xbin/busybox
adb shell chmod 4755 /system/xbin/su
adb shell /system/xbin/busybox --install -s /system/xbin
You need to make sure that busybox and su are in the same folder as you are typing the adb commands.
You could also push superuser.apk if you have it local:-
adb install superuser.apk
You can use these files to return to the stock kernel if you wish, you will still be rooted but adb will not be running as root on first login via shell.
Original Kernels:-
GT-I9000_XWJVZ_original
GT-I9000_XWJW1_original
GT-I9000_XXJVP_original
GT-I9000_XXJVQ_original
GT-I9000_XXJVR_original
GT-I9000_XXJVS_original
GT-I9000_XXJVT_original
GT-I9000_XXJVU_original
GT-I9000_XXJW4_original
Please DO NOT mirror any of my files, thank you.
I have used your 9100 insecure. Good work. I have also rated this thread a 5-star.
link to github repo for kernel source (most preferrably ^^) please !
what all did you change ?
thanks !
good work
10 chars
On JVS insecure kernel my WiFi connection keeps restarting when it's turned on, can you check it?
Bo$s said:
On JVS insecure kernel my WiFi connection keeps restarting when it's turned on, can you check it?
Click to expand...
Click to collapse
Mine is ok, maybe a bug in JVS makes an incompatibilty problem with your router? Try to flash the JVS original kernel and see if the problem still exists, you will still keep root.
Odia said:
Mine is ok, maybe a bug in JVS makes an incompatibilty problem with your router? Try to flash the JVS original kernel and see if the problem still exists, you will still keep root.
Click to expand...
Click to collapse
Same behavior on stock
Do i understand this correct?? From what i read u are using the kernel u use on your i9100 also on the i9000??? how is this possible?
Gvdn said:
Do i understand this correct?? From what i read u are using the kernel u use on your i9100 also on the i9000??? how is this possible?
Click to expand...
Click to collapse
No, he means that he has done the same work as on I9100.....
The kernels are not compatible!
simone201 said:
No, he means that he has done the same work as on I9100.....
The kernels are not compatible!
Click to expand...
Click to collapse
Lol ty was really going "WHAAAAAAAAT" when i read the OP. Maybe make it cleaer what u mean in the OP.
zacharias.maladroit said:
link to github repo for kernel source (most preferrably ^^) please !
what all did you change ?
thanks !
Click to expand...
Click to collapse
As you probably know, this is not only zach asking kindly or xda-rules. GPL licence, on which android kernel is based, clearly states to release updated source along with the build.
Developers are always welcome when they follow this. Bet you get help here to setup github.
Failing to comply usually ends in some banned/thread locked.
Sent from my GT-I9000 using XDA App
O-T said:
As you probably know, this is not only zach asking kindly or xda-rules. GPL licence, on which android kernel is based, clearly states to release updated source along with the build.
Developers are always welcome when they follow this. Bet you get help here to setup github.
Failing to comply usually ends in some banned/thread locked.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I hope he releases the sources soon....but it is also veeery simple to do an unsecured kernel!
Thanx works fine on JVS, but i needed to remove some stuff from /system/app
No space left....
Brotuck said:
Thanx works fine on JVS, but i needed to remove some stuff from /system/app
No space left....
Click to expand...
Click to collapse
Seems that JVR and JVS have no space left at all in /system folder...strange thing....
could you provide some link can opened in your country.
O-T said:
As you probably know, this is not only zach asking kindly or xda-rules. GPL licence, on which android kernel is based, clearly states to release updated source along with the build.
Developers are always welcome when they follow this. Bet you get help here to setup github.
Failing to comply usually ends in some banned/thread locked.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
The kernel is not compiled from sources, its only a 4 byte change which is injected to the stock kernel. That is the reason there is no source released, the Admins and Mods know this already and the reason this thread is still here alive and not locked.
and its the reason it works correctly with XXJVS.
Bo$s said:
Same behavior on stock
Click to expand...
Click to collapse
Thats bad, which router are you using? Have you tried rebooting the router?
simone201 said:
Seems that JVR and JVS have no space left at all in /system folder...strange thing....
Click to expand...
Click to collapse
Its true, I just remove the Aldiko eBook Reader from /system/app but of cause you can chose some other app you dont like
Gvdn said:
Do i understand this correct?? From what i read u are using the kernel u use on your i9100 also on the i9000??? how is this possible?
Click to expand...
Click to collapse
Sorry for the confusion, I hope the OP is now more clear.
Odia: Thank you for explaining your [KERNEL/MOD]
The kind-of-source is your HowTo in OP on how we can mod any kernel.
Sent from my GT-I9000 using XDA App
#compiled new cifs.ko, md4.ko, nls_utf8.ko for the new
IMM76I build
kernel number
3.0.8-gda6252b
attachment "cifs_gda6252b.zip"
------------------------------------------------------------------
hi there, i have compiled modules for CIFS to work on the stock 4.0.4 kernel.
kernel number must match "3.0.8-g034fec9"
in the attached zip,
here are the list of files.
cifs.ko
md4.ko
#above 2 are required to have it work
#here are native language support.
nls_utf8.ko
nls_cp932.ko
nls_cp936.ko
nls_cp950.ko
#above cp9xx are support for chinese characters.
nls_euc-jp.ko
#above is support for japanese letters.
thank you.
additional notes.
apparently you do not need any other native language support apart from utf8
the trick is, during the mounting process, you will need to specify the "iocharset=utf8" under options.
eg
"mount //192.168.15.123/a /home/b/c -t cifs -o username=d,password=e,uid=f,gid=g,iocharset=utf8"
for cifs manager, just put "iocharset=utf8" under the Options, and you should be able to see all different charsets.
do remember you will need to load the nls_utf8.ko
once you have the module install,
you can use cifs manager to manage your mounts.
(you can also set cifs manager to load this module for you).
Thanks, I'll give it a try later today.
soloxp said:
Thanks, I'll give it a try later today.
Click to expand...
Click to collapse
make sure that you have the correct stock kernel.
must match "3.0.8-g034fec9" else insmod will fail.
if anyone of you are running other version of kernel, i can try compile if for you as well, but let me know your kernel version.
do note, i have not tried compiling for other version, it might and might not work.
qwerp_ said:
must match "3.0.8-g034fec9" else insmod will fail.
if anyone of you are running other version of kernel, i can try compile if for you as well, but let me know your kernel version.
Click to expand...
Click to collapse
I've got the ICS 4.0.4 OTA update (IMM76D) to my Nexus S and it says "kernel 3.0.8-g6656123".
Any chance of getting a build for this one?
http :// dl.dropbox.com/u/11754796/imm74d.png
chrkad said:
I've got the ICS 4.0.4 OTA update (IMM76D) to my Nexus S and it says "kernel 3.0.8-g6656123".
Any chance of getting a build for this one?
http :// dl.dropbox.com/u/11754796/imm74d.png
Click to expand...
Click to collapse
here you go.
give it a try.
for stock Nexus S kernel "3.0.8-g6656123"
files included are
cifs.ko
md4.ko
nls_utf8.ko
Samba (CIFS) kernel modules for ICS 4.0.4 (IMM76D) kernel 3.0.8-g6656123.
qwerp_ said:
give it a try.
for stock Nexus S kernel "3.0.8-g6656123"
Click to expand...
Click to collapse
Thanks!
I confirm these work great on ICS 4.0.4 with "kernel 3.0.8-g6656123"
Awesome!
On my galaxy Nexus stock doestn work cifs manager said cannot access a needed shared library
Noob question, what is CIFS?
Enviado do meu Galaxy Nexus usando o Tapatalk
Guto ViP said:
Noob question, what is CIFS?
Click to expand...
Click to collapse
Common Internet File System, is another name for SMB (Server Message Block) also known as Samba. It's most commonly used in Microsoft Windows networks for providing shared network access to files, printers and other services.
These modules allows you to mount a shared directory from your windows computer, on your phone.
I use it to watch movies and play Mp3 on my phone, which is stored on my (windows) media server.
aplatas said:
On my galaxy Nexus stock doestn work cifs manager said cannot access a needed shared library
Click to expand...
Click to collapse
this is the shared library cifs manager is complaining about.
hence you need to download and insmod it.
note. you will need to be rooted to do this.
qwerp_ said:
this is the shared library cifs manager is complaining about.
hence you need to download and insmod it.
note. you will need to be rooted to do this.
Click to expand...
Click to collapse
I am root, now the module is loaded but When i mount cifs manager said the error No such file or directory this is extrange because On my old Nexus S works
aplatas said:
I am root, now the module is loaded but When i mount cifs manager said the error No such file or directory this is extrange because On my old Nexus S works
Click to expand...
Click to collapse
did you load both
cifs.ko and md4.ko
?
both is required to have it work.
qwerp_ said:
did you load both
cifs.ko and md4.ko
?
both is required to have it work.
Click to expand...
Click to collapse
Thanks, the problem it was that the md4.ko it wasn't loaded
qwerp_ said:
did you load both
cifs.ko and md4.ko
?
both is required to have it work.
Click to expand...
Click to collapse
thanks, works well.
Any idea how to get CIFS running on Galaxy Nexus 4.1.1?
funkdified said:
Any idea how to get CIFS running on Galaxy Nexus 4.1.1?
Click to expand...
Click to collapse
In case you didn't see [OP] created a new thread for 4.1.1 here
qwerp_ said:
make sure that you have the correct stock kernel.
must match "3.0.8-g034fec9" else insmod will fail.
if anyone of you are running other version of kernel, i can try compile if for you as well, but let me know your kernel version.
do note, i have not tried compiling for other version, it might and might not work.
Click to expand...
Click to collapse
Hello,
could you compile it for the kernel version 2.6.34.
( I have a Zenithink ZT 280 C91 with ICS 4.0.3)
regards
-janez
cifs help
Hi,
hoping you can help me out. i have an android tv box that id love to get cifs running on so i can use mount manager and download direct to my nas disk. could you possibly compile these modules for the following kernel???
$ cat /proc/versionLinux version 3.0.8 ([email protected]) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50)
) #8 PREEMPT Wed Sep 12 11:07:28 CST 2012
[email protected]:/ $
Thanks in advance for your help!!!
Today was released the source of the China version kernel
Can be downloaded here: http://consumer.huawei.com/cn/mobil...pport/downloads/detail/p6-u06-cn.htm?id=16381
Great new, but we need to support to unlock the bootloader
S34Qu4K3 said:
Today was released the source of the China version kernel
Can be downloaded here: http://consumer.huawei.com/cn/mobil...pport/downloads/detail/p6-u06-cn.htm?id=16381
Great new, but we need to support to unlock the bootloader
Click to expand...
Click to collapse
This is good, hopefully we can get some underclocking and some kernel governors on this beast of a phone
And most important, battery and wifi tweaks. There are the weakeness of this phone (i think)
Sent from my HUAWEI P6-U06 using xda app-developers app
S34Qu4K3 said:
Today was released the source of the China version kernel
Can be downloaded here: http://consumer.huawei.com/cn/mobil...pport/downloads/detail/p6-u06-cn.htm?id=16381
Great new, but we need to support to unlock the bootloader
Click to expand...
Click to collapse
Link is Dead
GuneetAtwal said:
Link is Dead
Click to expand...
Click to collapse
Here you got it, in my git repo: https://github.com/S34Qu4K3/P6-U06-JellyBean-Kernel-3.0.8---China-Version
S34Qu4K3 said:
Here you got it, in my git repo: https://github.com/S34Qu4K3/P6-U06-JellyBean-Kernel-3.0.8---China-Version
Click to expand...
Click to collapse
are you able to compile it ...?, how to get default device config file, adb pull /proc/config.gz gives file does not exists.
Latest Download Path : http://download-c.huawei.com/download/downloadCenter?downloadId=16381&siteCode=cn
Edit:
i am able to find default config for this kernel in this path :
/kernel/arch/arm/configs/hisi_k3v2oem1_defconfig
New modules CIFS/USB Ethernet
sreeramu said:
are you able to compile it ...?, how to get default device config file, adb pull /proc/config.gz gives file does not exists.
Latest Download Path : http://download-c.huawei.com/download/downloadCenter?downloadId=16381&siteCode=cn
Edit:
i am able to find default config for this kernel in this path :
/kernel/arch/arm/configs/hisi_k3v2oem1_defconfig
Click to expand...
Click to collapse
Thanks, got my Trendnet TU2-ET100 USB ethernet adapter working (modules attached)
And, CIFS support
oh, and ext3 filesystem also
Modules to be placed in /system/lib/modules are attached for kernel version 3.0.8-00788-g5d19ba2
build.prop
Nees to recompile for ext3 journaled
Is this the correct kernel for our tablet? I am looking to compile some usb network drivers and I need the correct source kernel. Has anyone compiled the source? Which one did you choose and why? Thanks.
US - Wifi version P600
http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=P600
Sent from my Galaxy Nexus using Tapatalk
Looks like its the whole stock rom, the kernel should be in there. Once i get a chance to jump on a pc ill explore around a bit more, but it should be in there.
Just curious, whatre you looking to do with the kernel? Sdcard swap?
Sent from my SGH-T889 using XDA Premium 4 mobile app
I am trying to compile drivers for my plugable USB network adapter. I am following this post here but I am having issues compiling the kernel.
http://forum.xda-developers.com/showthread.php?t=2131825
[Driver] Asix AX88772 kernel module (USB Ethernet)
Sent from my Galaxy Nexus using Tapatalk
pozer69 said:
I am trying to compile drivers for my plugable USB network adapter. I am following this post here but I am having issues compiling the kernel.
http://forum.xda-developers.com/showthread.php?t=2131825
[Driver] Asix AX88772 kernel module (USB Ethernet)
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Hello.
Have you selected the option by modules ("M") or built-in ("*")? Maybe you should begin by built-in compiling.
This way, it will prevent problems coming from read/write access rights and also insmod problems.
After flashing your boot.img, you just have to start at the lign "-Setup ethernet settings, if you want static address, for typical internet router at 192.168.1.1"
of http://forum.xda-developers.com/showthread.php?t=2131825
pozer69 said:
I am trying to compile drivers for my plugable USB network adapter. I am following this post here but I am having issues compiling the kernel.
http://forum.xda-developers.com/showthread.php?t=2131825
[Driver] Asix AX88772 kernel module (USB Ethernet)
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Hello.
I confirm: the compilation of the source coming from http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=SM-P600 gives a working ethernet over usb device.
Mine is an asix 88772 chip. It dowloads at 1Mo/s which is the max of my DSL router, but I am sure it can do better. 11,6 Mio/s on my PC, on LAN.
I used built in compilation of the modules. (*) in make menuconfig.
How to give acces to the browser to the eth0 because now I can only download with wget in a console?
Chopac said:
Hello.
I confirm: the compilation of the source coming from http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=SM-P600 gives a working ethernet over usb device.
Mine is an asix 88772 chip. It dowloads at 1Mo/s which is the max of my DSL router, but I am sure it can do better. 11,6 Mio/s on my PC, on LAN.
I used built in compilation of the modules. (*) in make menuconfig.
How to give acces to the browser to the eth0 because now I can only download with wget in a console?
Click to expand...
Click to collapse
Can you write up a "How to" or let me know what you did... I am receiving errors when I compile the kernel.
Sent from my Galaxy Nexus using Tapatalk
Chopac said:
Hello.
I confirm: the compilation of the source coming from http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=SM-P600 gives a working ethernet over usb device.
Mine is an asix 88772 chip. It dowloads at 1Mo/s which is the max of my DSL router, but I am sure it can do better. 11,6 Mio/s on my PC, on LAN.
I used built in compilation of the modules. (*) in make menuconfig.
How to give acces to the browser to the eth0 because now I can only download with wget in a console?
Click to expand...
Click to collapse
What did you use for "Physical address of main memory"
Sent from my SM-P600 using Tapatalk
pozer69 said:
What did you use for "Physical address of main memory"
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Where did you see that?
I never use that.
If you are at boot.img building, I use exactly the parameters given by unmkbootimg, except of course the names of the files.
I used the source from opensource . samsung . com, and get the latest firmware from sammobile.com to get the initial boot.img.
I followed the tutorial here: search google: pete.akeo.ie (will edit the link it in some posts)
Thanks to Pete.
The compilation errors came from a too recent arm-eabi. The 4.6 like in the tutorial is working good, contrary to 4.8, on my PC.
To flash the final boot.img, myboot.img, tar -cvf boot.tar myboot.img.
Then I used ODIN on M$, to flash boot.tar.
If you succeed to flash myboot.img with fastboot, tell me please how do you do.