Sprint LTE frequency? - Samsung Epic 4G Touch

Does anyone know much about Sprint's LTE frequency? From what I understand it will operate at the 1900mhz frequency... But what exactly does that mean? Isn't the lower the frequency the the better? Would someone more knowledgeable be able to explain this? TIA!
Sent from my SPH-D710 using Tapatalk

Wimax is at 2500 mhz ....lte will begin at 1900 and then go to 800 when sprint gets rid of iden. From Nextel .... higher frequency was used because it takes less towers to get coverage but the 2500 doesn't penetrate very good ... the 1900 will work good and get much better later with 800 ...
Sent from my SPH-D710 using xda premium

Related

4G

So I know that we only get HSPA+ but at&t has 4g lte is it possible for this phone to get that signal by rooting it anyone heard anything about this or is this impossible
Sent from my SAMSUNG-SGH-I927 using XDA App
As far as I know, nope. The Tegra 2 doesn't support it.
If I were to unlock this phone could I get 4g speeds from a diffrent network?
Sent from my SAMSUNG-SGH-I927 using XDA App
Lte is in a limited market right now and will be for awhile
Sent from my SAMSUNG-SGH-I727 using xda premium
jayjayjoker2 said:
So I know that we only get HSPA+ but at&t has 4g lte is it possible for this phone to get that signal by rooting it anyone heard anything about this or is this impossible
Sent from my SAMSUNG-SGH-I927 using XDA App
Click to expand...
Click to collapse
According to GSMArena, the i927 utilizes the following frequencies:
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 850 / 1900 / 2100
I'd say that makes it a definite 'no' on the 4g...
HTH
L4T

Cellular frequency 1900mhz vs 800 vs 850 vs 1800

Can somebody point towards a good quick explanation of the benefits of each and how well the signal goes through building/walls etc.
Google, Wikipedia.
Sent from my SPH-D710 using xda premium
polska2180o said:
Can somebody point towards a good quick explanation of the benefits of each and how well the signal goes through building/walls etc.
Click to expand...
Click to collapse
Lower frequencies better signal... Higher frequencies easier to loose signal
Sent from my SPH-D710 using XDA
Admiral2145 said:
Lower frequencies better signal... Higher frequencies easier to loose signal
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Well there's this, but lower frequencies aren't without disadvantages.
The main advantage a higher frequency holds over a lower one is it's capacity; in a very rough explanation, it's able to hold more "stuff".
Higher frequencies are at an advantage in urban areas due to being able to accommodate a higher density of users. The catch is that tower placement needs to be denser in order to penetrate building well enough.
The best network would use a combination of both in high population areas, and primarily low frequency ones in rural areas (not a lot of people, but a lot of ground to cover).
Sent from my SPH-D710 using xda premium

How to view operating frequency?

So Sprint is partially launching its 800MHz network in September. I'm trying to find if it is actually up now. Does anyone know how to view the current frequency the phone is using? Thanks.
Sprint hasn't deployed 800 MHz anywhere on more than a few towers except in the Chicago market. Even in that market, it's unlikely for you to be close to a tower broadcasting that frequency.
But just for reference, dial ##DEBUG#, enter the code 777462, go to the first listing mentioning 1x, and look for the line labeled "Band". Most Sprint service is on band 1. Roaming can be either band 1 or 0. Sprint 800 MHz service is on band 10.
777462 is invalid
Sent from my SPH-L710 using xda app-developers app
wizky911 said:
777462 is invalid
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
The correct unlock code is 777468. (If that is too hard to remember, just enter SPRINT)
##debug# does nothing for me
Sent from my SPH-L710 using xda app-developers app
Correct me if I'm wrong but our phones will never see 800 MHz. The LTE radio it has, isn't built to pick up that frequency.
Sent from my SPH-L710 using xda premium
shook187 said:
Correct me if I'm wrong but our phones will never see 800 MHz. The LTE radio it has, isn't built to pick up that frequency.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
I believe that is correct for LTE. But the OP is writing about 1x service on 800 MHz.
I've been on 800 mhz here in NW Indiana for the past 2 or 3 weeks. I'm on the southeastern edge of the Chicago market. All the towers in my area are NV complete for 3G according to S4GRU's maps, and I can confirm that since I can see the RRUs mounted behind the antennas. I've seen 800 come and go a couple times, but it's been on solid here at my house for the past couple weeks. I live in the sticks, 5.2 miles exact from the tower (with LoS) i'm connecting to, and my signal went from around -92 to -97 dbm on 1900 to -83 to -88 dbm on 800 mhz. Significant increase.

[Q] HSPA+42

Hi everyone, I have a question regarding the HSPA+42 capabilities of the T889. Does it only get HSPA+42 on the AWS frequency or other frequencies as well?
Hi, i think t mobiles 1900Mhz is not 42 everywhere yet.Im getting 17 mbits at my home on 1700MHz and 7Mbits on 1900Mhz.But at some places speed and signal are better on 1900Mhz mostly in areas where hspa+ on 1700 is weak - thats only my opinion.So yes i think note 2 can reach 42 on every frequency compatible with hspa+
Who do I change AWS frequency?
Sent from my SGH-T889 using xda premium
*#2263#
Wcdma 1700 mhz only not gsm at 1700mhz right
Sent from my SGH-T889 using xda premium
jpeps3 said:
Wcdma 1700 mhz only not gsm at 1700mhz right
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
yes
does the phone automatically work on all the bands? or does it stick to a particular one? should i go through that menu and press all frequencies? thanks!
molesaied88 said:
does the phone automatically work on all the bands? or does it stick to a particular one? should i go through that menu and press all frequencies? thanks!
Click to expand...
Click to collapse
I think default for all 3g phones from t mobile is 1700.Even if you choose all frequencys the phone gets connected on 1700.
What are the defunct setting ??
Sent from my SGH-T889 using xda premium

Question about LTE

I've been doing some research on our device, and it appears that our device is configured to CDMA / LTE on the (1900 MHz spectrum). I hear that Soft banks deal to acquire Sprint will go threw July 10th and is expected to have the 800 mhz spectrum for LTE with more coverage & LTE through buildings. My question is can our phones be programmed to the 800 & 1900 band?
Sent from my LG-LS970 using xda premium
This is why I'm asking, Not sure if our chipset supports the 2500mhz and 800mhz spectrum, Or not. Noob question but I'm very curious as to see if our 2012 devices can support the 800 & 2500 band for mid 2013.
Sent from my LG-LS970 using xda premium

Categories

Resources