Develop Bugs

XDA IIs Wifi and lockups

Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks

I have no problem at all with Netgear router. Try changing the connection speed setting in the router to the "b" mode only. Hopefully this can solve your problem.

No problems here either I'm afraid. I'm using a Draytek Vigor 2600VG at home and at work there are two of us with XDA IIs using a Linksys BEFDSR41W wireless router and no problems there either.
Sorry! :-(
Try a hard reset (gulp!) and see if you still have problems (Without anything else installed that might be inteferring) otherwise might be a faulty unit perhaps.
--Neil

I second what xanth said, I had the problem where wifi would not turn on, so I hard reset and installed each software back individually the problem was Calligrapher 7.3 did not like being in Storage or Storage Card only in Main memory (go figure)

efjay said:
Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks
Click to expand...
Click to collapse
I use the XDA IIs on a variety of wireless networks and experience problems with an alarming regularity. The most annoying is the fact that the top bar seems to loose functionality, when using wireless!!

I will actually add that I do seem to have problem with the "range" of WiFi.
I need to do more testing, but it doesn't seem to be more than 20m or so before have communication issues/timing out :-( Will have to find out what our walls are made of!!!

I have problems connecting sometimes. I regularly use three routers, Draytek, Buffalo and Belkin. The only time that it locks up is when using skype. The skype problem is a known issue with no cure.
Nigel

I am having a problem where my Siemens SX66 will loose connection to my Microsoft MN700 wireless AP on occasion. -It simply appears as if the Wifi radio shuts itself off.
Weird.....

Wifi has never worked for me. It simply doesn't work in the way nature intended.
The main problem (as far as I can tell) seems to be that it cannot get DNS or IP configuration settings from my router (Belkin 7630) automatically.
It can connect to my wireless network without any hassle, but that's about it. If I enter DNS and IP settings manually it works fine. But this is unworkable if you want to connect to another wireless network.
If I can't sort this out by next week I'm going to sell the unit on eBay. It's been nothing but a pain since I mistakenly bought it in December.
Wifi is a nightmare on this device! I'm going back to Nokia.

I am going to do a hard reset and test to see if i still get any freezes. Anyone know of any software i can use to backup my text messages?

WiFi
Hi guys,
Haven't had too many issues with WiFi over here - standard O2 Asia ROM (with the BT 3500 update).
I'm running a Netgear WG602 @ home with 64bit WEP and a Dlink AP2100 @ work with WPA-PSK. No connectivity problems at either location, both DHCP. It does however take a few minutes to connect, but this is on the odd occasion.
The only frustrating thing with the WiFi is that I have to soft-reset often to turn Wi-Fi on - any ideas? Hopefully O2 will fix this in the next ROM. Other than that, I've had the Nokia 9500, P900/800 and this is by far the best device for the power user.
Just me 2c!
Cheers
cK

Wifi is on all the time on my device, sometimes when I switch the device on while within range of an AP it does not connect. Often switching wifi off and then onn again causes it to connect. If this does not work then I can often go into the network dialogue section, and see the network marked as 'availble' but not connected (why it sometimes does not auto connect I dont know). Tapping connect usually cures. If that does not work then I too need to soft reset.
I hope like you that they fix this cause its damned anoying. I will be interested to see what the Benq P50 is like when its released. I shall get one from expansys to test and ship it back within the 7 days.
Nigel

As for those having problems with specific access points. It is not nessesarily the fault of the blue angel. It seems to me that none of the manufacturers of wireless kit understand the term 'standard' they all seem to have their own take on it, which is why kit from different manufacturers refuses to talk to each other. I am of the opinion that they do it in purpose to lock you into using their client cards with their AP's !!
Try it with some non Belkin kit and see what happens.
Nigel

Well i tried a hard reset and didnt install any apps and tried connecting to wifi again and still got a lockup and loss of connectivity. Im going to swap the router for another make and see what happens

Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.

Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.

XDA IIi and wifi
I just bought one of these and can't get it connected. I have a netgear wg602 access point. When I finally figured out how to set the IP manually (the 02 xda tech support said it can't be done - maybe they're right ;-)
I now have it saying it's connected, with right IP address. My DNS and gateway are set up for the wireless adapter in network adapters. The signal is average. The XDA says wifi is connected. The access point even says it's authenticated and associated - same as my other stations.
Only problem is, internet explorer doesn't find any web pages - says "The page you are looking for cannot be found" (works fine through GPRS)
Also, terminal services times out trying to connect to an internal IP address (to eliminate DNS as a problem)
So, anyone know how I troubleshoot network problems - it looks like a TCP/IP issue? Can't find ping or arp etc. I've also tried an IP address that I know works on the network.
thanks for any help
Dave

Hi
For ping, ipconfig and stuff, head to http://www.cam.com/windowsce.html
I have had multiple issues trying to get wifi working reliably. It still fails now, but there are a few tricks to get it working again. Most of my wifi issues have been due to regular use of three AP's [email protected] and [email protected] along with GPRS and VPN.
To start with I suggest setting all the ****e in connections (internet and home network to 'My ISP' then goto your wifi setup, network adapters, and tell it that the wireless card connects to the internet. Now, tap ok, and goto tools, network cards, tap the active connection (it must already be connected) and ensure that its set to internet.
Next soft reset the thing, and wait for it to connect to yr wifi. Now, use the ipconfig tool and ping tool from the above site to check that all is OK. Check that its got the default gateway right and a sensible LAN IP.
I have found on occasion that I can be connected via wifi, but that the device is still trying to talk using an old IP allocated by gprs which means nothing to my lan! IPconfig will show if all is OK.
Whoever wrote the whole of the networking system (and its terrible gui's) on windows mobile wants shooting. I usually have 2 VPN profiles setup under my work network. If I leave it set to that, and use wifi from my lan to connect to the internet all is fine. However if I try and access a local server, the damned thing starts trying to connect a vpn (it aint inteligent enough to work out that the IP I asked it to connect to is local).
I have been trying to find a setting for all this networking rubbish that allows me to do *everything* without reconfiguring each time - to no avail.
Another thing to note is that you cant send/receive MMS messages while wifi is connected (more stupidity), it tries to connect to the MMS server using the wifi connection, and the telco blocks it cause it wants to charge you for sending MMS over GPRS. Only solution is to disconnect wifi, send MMS then reconnect wifi!!!
Nigel

No problems with WiFi for me
Hmm I'm using an O2 Asia Rom as well.. and my wifi manager seems to automatically create "settings" for each AP it detects and I seem to have no problems connecting at all... been using WiFi around my house since the first day i got it..
i am using a Linksys Wireless 802.11b router..
btw I am new here.. finally able to register!
How's everybody doing?

Cannot turn off IEEE 802.1x
Has anyone had problems unchecking the 'IEEE 802.1x netwrok access control' checkbox???
I uncheck it, but then when I go back to the screen (click on the connection | then select 802.1x tab at the bottom) it has checked itself again!
The XDA IIs does not save the setting - it just keeps re checking itself 02 help have been no use - they sent me an instruction manual and it even says in one of the step 'uncheck IEEE check box'
Im am using a netgear wirelesss router and have also tried on a d-link
Sugestions - is anyone else having this problem??

[Q] Wifi connection

I just got my A7 Elocity and been trying to get it to reconize my Linksys wireless router I use in my home. SO far it is not reconizing it, my other tablet and wii does. It has done the scanning thing but still won't reconize it. Do I need to buy another wireless box? This one I got is several years old but has worked for everything except my wireless printer. Any help is appreciated.
Thanks, Brenda aka Mysterychi

Check how configured wireless network in your router.
- Don't use WEP keys - Android doesn't like it.
- Check wifi channel number - it must be not greater than 11
- Temporary try reconfigure your wifi-network to open mode (if it works, so add some security)

I purchased mine back on feb 1 I had same problem. My A7 was stuck in some kinda loop going back and forth from searching, authinticating, connected, and disconnecting the wifi. Once I did the firmware update from elocity it bingo no problems since. I think you need to just install the firmware from elocity support page.

I am using a wep key, no problem. Maybe i am just lucky

guycaballero said:
I am using a wep key, no problem. Maybe i am just lucky
Click to expand...
Click to collapse
What length of key?

As WEP is so easy to break, give a shot using WPA2. I'm using a Cisco Valet and my tabs connect beautifully. Usually just using g but the throughput is dandy.

Tethering network identification buggy on Windows 7

Hi,
each time I use tethering on my Windows 7 PC it recognizes the connection as new (happens with USB and WiFi). I plug in the phone (or enable WiFi tethering) and Windows asks if this is a private connection and calls it network (or AndroidAP on WiFi). I plug it off and on again - the same happens again, Windows calls it network 2 (or AndroidAP 2). Next time network 3 etc. And with every number increase it keeps asking me, if this is a private or public connection, which is kinda annoying. My device is a GSM GNex running Stock 4.0.4. This happened with my SGS too. Any suggestions?

Lol same exact thing happens to me, it bothers me a little but is not like it hurts or affects the performance so I havent look into try to fix it
Sent from my Galaxy Nexus using xda premium

Sounds like the issue is on your PC end. Try naming your Hotspot something unique and putting PW security on it.

thx, i am using a custom name and wpa2 (no effect) but i used "androidap" in the post so that users find this thread when they want to google the issue.
Edit: I am experiencing the same behavior on my Windows 7 netbook. I tried Ubuntu on my PC - no bug here (WiFi and USB).

That is a Windows 7 fail.

This is a Win 7 issue I believe because it happens when USB tethering all 3 of my Android powered phones. I had over 150 network connections in Windows, until I found the "Merge or Delete Networks" option and was able to delete them.
Now I don't USB tether anymore. I have a datastick, and I also have a Linksys WRT54G with DDWRT flashed on it. Normally I use the datastick, but whenever I do need to tether I just fire up the wifi hotspot on my phone, the router connects, and it provides my lan with internet access.

Semi-Solution
I was having the same thing. It's just annoying, but you can remove the extra networks.
Right click on the network icon in your system tray, select "Open Network and Sharing center", click on the icon of your network, and on the resulting window there is an option to merge or delete networks (bottom left).
From here you can at least remove a load of networks!

Win 7 & Android AP

I many a times use the wifi tethering to connect my Win7 laptop to connect to the internet. Running CM ROM.
Win7 connect to the AP right away, but shows 'Limited Connectivity'. Then it takes another minute or two before actually getting connected to the internet.
Connecting my Xoom to the same AP is instant. It seems like a Win7 issue.
Does anyone experience this issue?

hkk said:
I many a times use the wifi tethering to connect my Win7 laptop to connect to the internet. Running CM ROM.
Win7 connect to the AP right away, but shows 'Limited Connectivity'. Then it takes another minute or two before actually getting connected to the internet.
Connecting my Xoom to the same AP is instant. It seems like a Win7 issue.
Does anyone experience this issue?
Click to expand...
Click to collapse
I can't say that I've experienced this issue specifically, but I feel your pain. My guess would be an issue is with Windows 7. Try something different and see what happens. FoxFi is an easy to use WiFi tether. Worth a try if it fixes your issues.

Edit.

chrisgriner said:
I can't say that I've experienced this issue specifically, but I feel your pain. My guess would be an issue is with Windows 7. Try something different and see what happens. FoxFi is an easy to use WiFi tether. Worth a try if it fixes your issues.
Click to expand...
Click to collapse
Thanks chrisgriner. Tried FoxFi - doesn't work on JB. Looking thru the reviews, a few others also complained of it not working with JB.

hkk said:
I many a times use the wifi tethering to connect my Win7 laptop to connect to the internet. Running CM ROM.
Win7 connect to the AP right away, but shows 'Limited Connectivity'. Then it takes another minute or two before actually getting connected to the internet.
Connecting my Xoom to the same AP is instant. It seems like a Win7 issue.
Does anyone experience this issue?
Click to expand...
Click to collapse
I have had this same issue with my xoom and windows 7 laptop. My laptop always takes much longer to connect and catch up when connecting. Its probably something with how windows operates. I just deal with it.
Sent from my Galaxy Nexus using xda premium

1. Make sure to set a WPA2 password.
2. Make sure the Network type is set as PRIVATE/Home in Windows.
3. If all else fails, go to Control Panel > Network > Network Adapters and disable your wireless card/adapter and re-enable it.
Sent from my Galaxy Nexus using xda app-developers app

Smokeey said:
1. Make sure to set a WPA2 password.
2. Make sure the Network type is set as PRIVATE/Home in Windows.
3. If all else fails, go to Control Panel > Network > Network Adapters and disable your wireless card/adapter and re-enable it.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Thanks smokeey, those are my settings. Sometimes, when windows fails to get Internet connectivity, clicking on troubleshooter (which sometimes disables and re enables the wireless adapter) gets it going.

Update your wireless card drivers on your laptop.

[Q] Wifi Tethering Multiple Devices - Limited Connectivty

Does anyone else have problems with wifi tethering? It seems to happen for me with any rom, currently though using JellySlim_FullPower [HSD Project 4].
My problem is I start the wifi tethering from my Xperia S, then on my Windows 7 PC I can connect no problem at all and usually it works fine - The problem then is if I try and connect to the same hotspot with another device at the same (Xperia T / Nexus 7 2013). Within minutes of more than one device been connected to my Xperia S wifi hotspot all the connections drop, then on Windows 7 I get the Limited Connectivity and yellow exclamation mark.
To keep it simple, wifi tethering seems to work when only one device is connected to the hotspot, but it seems having multiple devices connected causes the connection to lose internet.
Has anyone else experienced this, have a solution maybe? I am wondering if there is a setting to allow x amount of connections at once or something
Thanks.

Ned_Flanders said:
Does anyone else have problems with wifi tethering? It seems to happen for me with any rom, currently though using JellySlim_FullPower [HSD Project 4].
My problem is I start the wifi tethering from my Xperia S, then on my Windows 7 PC I can connect no problem at all and usually it works fine - The problem then is if I try and connect to the same hotspot with another device at the same (Xperia T / Nexus 7 2013). Within minutes of more than one device been connected to my Xperia S wifi hotspot all the connections drop, then on Windows 7 I get the Limited Connectivity and yellow exclamation mark.
To keep it simple, wifi tethering seems to work when only one device is connected to the hotspot, but it seems having multiple devices connected causes the connection to lose internet.
Has anyone else experienced this, have a solution maybe? I am wondering if there is a setting to allow x amount of connections at once or something
Thanks.
Click to expand...
Click to collapse
.
I have same problem, looking solution also. Stock 6.2.B1.96 Android 4.1.2 + OC DoomKernel.
Also tryed tether internet by bluetooth, but not work.

Noo, not working...

Pepzki said:
Noo, not working...
Click to expand...
Click to collapse
The only thing I can do is connect phone to PC and use USB tethering for internet on PC, then to share with another device also use hotspot.
Again though, any more devices using the same hotspot drops all the connections. I cannot find a resolution.

**

Have you tryed with kitkat how tethering works?

Two months later and so many many wasted hours, looks like solution found! Luckyly by my self
Go to your pc wlan device properties and change from internet protocol verion propeties ip to automatic.
I hope this helps help someone else.
Strangely two other phone tethers ok even ip wasn´t automatic. Not sure when that setting was change. Or was it.