Develop Bugs

What not to do so you dont brick your epic 4G,LISTEN OR REGRET IT!

Take it from me, i hard bricked my epic touch 2days ago,and even a service repair center couldnt odin flash the stock tar, instead put a new motherboard in after a few helpful posts with ideas, from some generous members here, still no luck, but beware if you do u will gey lots of laughs and lots of your an idiot!
#1 if u play with rom zips make sure you realy read the process first clearly.
#2 if you plan to flash any tar make sure you have the eg30.tar for stock epic touch 4g,it can be found at acs website its i believe 430mb file put it into pda on odin with kies drivers installed.
#3 Do not use any tar that u suspect is from another carrier or phone instabrick,do not flash a GSM TAR OVER THIS PHONE ,that is what i did,i got a botched renamed gti9100 tar for an atat phone and flashed it and it will cause u too loose all usb recognition for good when u flash a gsm rom on a cdma device.
#4 Lastly for those that are in a similiar situation,with no usb recognition to odin after trying everything godly possible, take it to a service repair center kindly say u did a bad kies update and now this just act stupid , theyll try to flash firmware wont get usb connection and theyll replace ur motherboard in 10 min. No charge providing u have insurance on device.
This is for all the newbies who have already screwed up there phone.
Enjoy hope this was helpfull info.
Like to give a thanks to
Epix4g and chunology for at least tryin to help me in my experience.

I wonder if the jig helps in that situation, its supposed to.

reply..
Yes and no, the jig allows for three things ,reset binary count to 0, remove yellow triangle and force phone into download mode.
In certain brick instances which there are many kinds , a jig would only get u into dload mode, the brick that i had gotten was so far gone i actually lost any chance of getting usb function back without that your hopeless, this happened because i flashed a gsm rom on a cdma phone ,which moreless patched the usb functionality because the gsm.firmware ona cdma phone wasnt corresponding with one another . Nothing could ever be done besides changing the entire motherboard
Wasnt done on purpose i got a bad tar file for a [email protected] galaxy s , that was renamed eg30.tar, i didnt know this till phone booted up as a gt i9100

I have a jig but I don't plan on testing your theory. If I had my phone under normal circumstances I would be happy to try your theory because I could just go to a store for the fix, in my situation I would be stuck.

A jig is different from jtag there is a guy that says he can fix its on another board gs2 ?maybe
Sent from my SPH-D710 using xda premium

You guys are lucky...
Mine is so fried that the /data is inaccessible no matter what who does and Sprint, the kind souls that they are, is claiming that I don't have insurance (I guess not, considering I requested 5 months ago and their records indicate my phone was only activated on 4/2) and have to pay full boat.
HA! They screwed themselves. By claiming that my phone was only activated on 4/2 they have shoved me back into Sprint's replacement parameters AND the auto qualify for insurance. Option number 1 and... presto, free BRAND NEW phone. I'm lucky too I guess. While posting this reply I got completely taken care of.

[Q] believed soft brick and more

OK for start i rooted my gs2 and installed cm9 update-cm-9-20120416-SNAPSHOT-epic4gtouch-alpha3-signed. this loaded and was running just fine. but then I noticed when trying to install update-cm-9-20120512-NIGHTLY-galaxys2-signed i had lost my cwm recovery and decided to investigate and experiment.(got an answer on bold issue) (bad Idea) So then I re flashed cwm recovery and loaded cm9 5/12 it loaded but i had no data/WiFi so i booted back into cwm recovery and formatted everything (i think this is were i messed up). I can still get into down loader but now my computer and Odin wont recognize when I connect my phone. I can get into cwm recovery but it cant mount my SD card and says there is nothing in internal storage. I have uninstalled kies and all Samsung related drivers/software. rebooted computer, reinstalled kies and software and still nothing.Any help would be great and any more information needed I will do my best.
So now, that is about everything I can think of. So I guess my main question would be How do I get my phone and computer to talk to each other again and most of all get it back up and running.
Also just for the record im not a complete noob I was a ROM addict with my transform. and I have searched forum after forum and have had no luck finding the info i need. which is why i am creating a new post.

yeehaw1130 said:
OK for start i rooted my gs2 and installed cm9 update-cm-9-20120416-SNAPSHOT-epic4gtouch-alpha3-signed. this loaded and was running just fine. but then I noticed when trying to install update-cm-9-20120512-NIGHTLY-galaxys2-signed i had lost my cwm recovery and decided to investigate and experiment.(got an answer on bold issue) (bad Idea) So then I re flashed cwm recovery and loaded cm9 5/12 it loaded but i had no data/WiFi so i booted back into cwm recovery and formatted everything (i think this is were i messed up). I can still get into down loader but now my computer and Odin wont recognize when I connect my phone. I can get into cwm recovery but it cant mount my SD card and says there is nothing in internal storage. I have uninstalled kies and all Samsung related drivers/software. rebooted computer, reinstalled kies and software and still nothing.Any help would be great and any more information needed I will do my best.
So now, that is about everything I can think of. So I guess my main question would be How do I get my phone and computer to talk to each other again and most of all get it back up and running.
Also just for the record im not a complete noob I was a ROM addict with my transform. and I have searched forum after forum and have had no luck finding the info i need. which is why i am creating a new post.
Click to expand...
Click to collapse
First question, which version of CWM were you using?
Second question, when you say that your computer didn't respond is it just not reading as an extra drive? If you have your sound on does the computer make the new hardware detected ding sound?

Looks like you flashed the intl version galaxy s2 cm9, this phone is usually listed as e4gt or epic touch in rom files not galaxy 2 so more than likely your USB is corrupted and no longer will be recognized by your PC which makes your phone FUBAR
Sent from my SPH-D710 using xda premium

thanks for the speedy response. I am using cwm 5.5.0.4 and No noise at all. The computer ain't regerstering that i plugged any device in via usb. I tryed different cords and nothing. I did try different usb devices to ensure it wasnt my usb and they worked just fine. it was working not a problem then what ever i did to my phone it stopped. My internal storage says there are no files. dont remember if i mentioned that before.

yeehaw1130 said:
thanks for the speedy response. I am using cwm 5.5.0.4 and No noise at all. The computer ain't regerstering that i plugged any device in via usb. I tryed different cords and nothing. I did try different usb devices to ensure it wasnt my usb and they worked just fine. it was working not a problem then what ever i did to my phone it stopped. My internal storage says there are no files. dont remember if i mentioned that before.
Click to expand...
Click to collapse
K. Unfortunately it is a hard brick. You will probably need to look at getting a JTAG service. Other than that it's pretty much gone.
Sorry!

Yup you flashed a rom for the intl gs2, next time read a little more carefully anything with gs2 or galaxy s2 is not for the epic touch. 2 completely different devices and anything for the galaxy s2 will Bork the epic touch. Jtag is your only hope, and I'm pretty sure it can fix your version of a brick since it can still boot. I wouldn't try doing anything else cuz if you get the blue light of death there is no hope aside from getting it replaced at that point. Mobile tech videos website will have more info on jtag for you, it'll cost around $50
Sent from my SPH-D710 using xda premium

thank you I will go drop it in a bucket of water and get insurance claim on it. thank you for the help

Just take it to Sprint and play dumb! Seems like a lot of folks are getting them replaced for free or 35 bucks tops.

I can try that to I actually tried zapping it with a 6.5mill volt tazer with a wire ran in through usb port but didnt work haha. Only issue I see is you can still boot to recovery and download and recovery is cwm recovery. I was trying to figure out how to just fry the motherboard and then play dumb.

yeehaw1130 said:
thank you I will go drop it in a bucket of water and get insurance claim on it. thank you for the help
Click to expand...
Click to collapse
Jtag is cheaper than ins deductible and if they can't fix it the refund your money so I'd give it a shot first
Sent from my SPH-D710 using xda premium

I would not drop it in a bucket of water!!! When you take it to sprint the first thing they do is check for water damage. They know because there are stickers on the inside of the phone that change colors when they come in contact with water. Trust me, I know.

Tutorial: How to use KIES Emergency Firmware Recovery (EFR)

Edit Nov 28 2013: GN3 Owners PLEASE READ!
As of the new update the ATT Galaxy note 3(possibly all carriers) IS NOT compatable with KIES EFR!
This includes KIES 2.XX and KIES 3! What does this mean?
If you took the MJ5 update you will no longer be able to use the KIES Emergency Firmware Updater.
Please complain to Samsung, locking the bootloader is one thing but no EFR??
Would you get on ship with no life boats or life preservers??
Seriously uncool of Samsung to do this.
-end of edit
/rant
So its come to my attention a lot of new guys are getting stuck soft brick, bootloop, borked recovery etc.
So .... I made this tutorial for everyone.
Please: dont flame or post useless comments.
Its great for you Odin is easy, but I made this for people who want a hassle free easy way to recover their phone.
This is also imo the fastest and easiest way back to true stock w/o a "modified"
Some people have reported a flash count of 1 but idk I always went back to 0.
If you are new, have no rooting, rom flashing or w/e experience, imo you should NOT be using odin until you have completely read up on it. I mean hey some of you super geniuses have no probs but when I see posters who have no clue about usb drivers or even how to use kies, im confused why you would want to venture to odin? 500 $ is a very expensive brick.
Ok so unsure about odin or just new and now you just borked your brand new phone?
First things first:
Can you get into dl mode.
Dont worry about recovery mode because it doesnt matter for this. This works with corrupted recovery as well.
For now lets just say download mode is achieved one way only:
Press : vol down power and home key all at the same time. Release quickly when you see the screen come up. Takes practice some times.
:thumbup: This method will remove "modified" status from your phone! :thumbup:
:beer:
Ok ready? You want step by step you got it.
If this doesnt work you are doing it wrong, so try again. Even with Odin you may have to try several times, its the nature of android.
If you can get into DL mode you CAN 100% recover your device.
If it doesnt work or you get an error, you are doing this wrong. I am pretty sure this is for ALL Samsung phones but I can only confirm this for my gs3 and note2.
Keep in mind: I corrupted my recovery on my gs3 several times and this still worked. I will assume the same for my note 2.
Download kies from samsung.com
Follow the prompts but no need to install the stupid codecs.
When you are done, (dont forget hit "yes" to dl current usb drivers)
ON your computer "run as administrator" the kies icon.
make sure you are connected to the internet.
Kies will automatically check for updates and proper usb drivers.
No need to install "myfree codecs" hit no on that.
every thing else hit yes
Step one:
Run kies as administrator as I said And do all the usb updates, kies updates
but leave the codec thing alone.
Step by step instructions just follow the pics in order:
1.Kies opens asks about update
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.
3.Dont worry about this
4. Now in top left corner hit "tools" tab. Ignore everything else
5. After clicking tools tab click the emergency fimrware recover choice as described below
6. For now ignore this button. YOu might need it later but ignore it for now
7.
8.Well last step. Hit emergency recovery ( the "ok" button wont be there )
this will probably take 20 to 30 min total. The EFR will let you know if its succesfull or fail.
IF it fails try using the method I said to ignore. Its the same thing just an extra step of in putting your phones exact model number.
Heres some xtra links: (Thanks to Bajanman for finding these btw!)
http://www.sammobile.com/firmwares/1/
http://www.sammobile.com/kies/
http://m.samsung.com/us/support/

Nice help guide for noobs.
Good guide freak :thumbup:
Might want to go back and check some of your words tho. Lot of them misspelled... lol
Side note: All my years with Sammy I've never used Kies with any of my phone's!!
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2

yeah yeah yeah

Nice tut freakboy i just hope I dont need to use it someday I subscribed anyways who know flashing games always full of surprises.
Sent from my SAMSUNG-SGH-I317 using xda premium

Please HELP
i have an at&t galaxy note 2 was rooted got OTA update now no signal and when i go to mobile networks (under settings) it says insert sim card so i am trying to do it your way and i have updated everything (drivers and kies) and when i try to connect to kies it says my device isn't supported by kies and there is no phone model in the white box to use the "emergency recovery using recovery code" is there a place to get this code?
Please help

Well first off there shouldnt be a need to use the kies efr with just an ota.
You can select your phone model manually.
Can I ask...did you install a recovery and make a bu after you rooted ?
im not familiar with these newer ota probs, I remember on my dx ota was no biggie due to rootkeeper. Its strange that a stock rooted phone gets borked with an ota.
Can you get into recovery?
Can you get into dl mode?
Im subscribed to this thread so ill try n help out
Edit: are you using this method because you are unfamiliar with odin?

i did install CWM recovery
i don't remember making a back up but i am sure i did
i can NOT get to recovery
i can get to dl mode
i am familiar with odin but i am on my work computer as i don't have internet at home at the moment so i cant run searches as it trips the big brother software here and i would get in trouble the phone seems to work fine other then it doesn't recognize the sim card and no recovery mode
but if i could find a stock rom i could just flash with odin

That may also be your problem.
Are you running kies as admin?
Sorry if these sound like stupid questions.
But 8f you dont have admin privies kies may not work.
Regardless there is a drop down for you to manually choose your phone.
You do have usb debugging?
A corrupted recovery should not affect your ability to use kies.
Your jobs software could be blocking it.

Also you do realise you cannot take ota with custom recovery?
Thats why your phone is borked.

i do realize it now lol but i didnt even think about it when it happened
yes running kies as admin
no to usb debugging don't event remember how to get to usb debugging but if it is in settings under mobile networks i cant get there it just says insert sim card

Justvto be sure this is an sgh-i317 correct?
Try doing the upgrade first that may give you the code.
First make sure you have usb debugging
Home>Settings> developers options> make sure usb debugging is checked.
Also since it sounds like your recovery is corrupted do not do a factory reset.

Ok so try this:
Make sure you have latest drivers from samsung for YOUR device.
Make sure kies is the latest version.
Make sure antivirus is off orvput kies in the whitelist/allowed.
Turning off is better.
Go to dl mode on phone .
Sincevkies is already running go to thetop menu :
tools> emergency firmware recovery
You should get a drop down list of devices. If this is an att phone and not another carrier model ported to att, you should choose sgh-i317 (att galaxy note 2). You shouldnt need a number thats only if you try to upgrade and it fails ( as I mentioned you may want to try upgrade first to trick the que to give you a number)
Post back.

+1
Sent from my SGH-I317M using xda premium

freakboy13 said:
Ok so try this:
Make sure you have latest drivers from samsung for YOUR device.
Make sure kies is the latest version.
Make sure antivirus is off orvput kies in the whitelist/allowed.
Turning off is better.
Go to dl mode on phone .
Sincevkies is already running go to thetop menu :
tools> emergency firmware recovery
You should get a drop down list of devices. If this is an att phone and not another carrier model ported to att, you should choose sgh-i317 (att galaxy note 2). You shouldnt need a number thats only if you try to upgrade and it fails ( as I mentioned you may want to try upgrade first to trick the que to give you a number)
Post back.
Click to expand...
Click to collapse
thanks so much for all your help there is no drop down box on my version of kies however i found stock firmware some where else and it is working now again thanks so much

mrnewspaper said:
thanks so much for all your help there is no drop down box on my version of kies however i found stock firmware some where else and it is working now again thanks so much
Click to expand...
Click to collapse
Nice job! Isnt it great figuring things out yourself?
Love hearing happy endings!
Now... go into recovery and :
Make a backup/boot img .
:thumbup:

Hello,
I am trying to fix my Korean Note 1. It is not being listed in the list of devices. I have it in D/L mode but it isn't listed. Can I use the code and, if so, what is the right code?

activepassive said:
Hello,
I am trying to fix my Korean Note 1. It is not being listed in the list of devices. I have it in D/L mode but it isn't listed. Can I use the code and, if so, what is the right code?
Click to expand...
Click to collapse
Hmmm not that familiar with note 1 or international version but ill assume its the same?
If you are not listed in the database you may want to try using odin.
The code needs to be generated by kies.
Is kies recognizing your phone?
I may be mistakwn but isnt their a kies for your country or some thing like that?
Have you submited this question in your forum?
Edit: I found this I hope it helps you!
http://forum.xda-developers.com/showthread.php?t=1740367
sent from my T.A.R.T.I.S
(Time And Relative Tarts In Space)

so this will restore my phone to stock and will instal stock recovery and reset my flash counter and modified status? no need for tiangle away and unroot??

i tried doing exactly what was in the OP and it's now stuck at 0% at restoring. It's given me an error message a few times before and i tried again but it still stays at 0%. I tried doing it with the button you said not to click and running as admin.
Now i've got two problems, one is the phone not getting out of this mode and 2 is it not even giving me an error message meaning i can't try again since it's still busy restoring.
What can i do now? Should i just pull the plug out of it and try again? Will this not break anything?
What should i do now OP?
further info:
model: galaxy S3 GT-19300
i've had it rooted using CF-root and i did a firmware update to trigger emergency recovery mode.
I got into emergency recovery mode on purpose but expected to get out of it...
---------- Post added at 08:03 PM ---------- Previous post was at 07:10 PM ----------
Hooray! it's now actually installing it and i didn't mistake it for downloading this time. I switched USB ports and now it works apparently.
Also something people that do this in the future should know: if you unplug the cable, it just gives you the error message saying that it couldn't find it which shouldn't cause any trouble. BUT only do this once it is stuck at 0%.

Possibly stupid question..
Having rooted the Note 2 att with mr skips toolbox, I then noticed a few days later the modified status.. So due to concern for warranty being voided, I'd like to return to stock: ( Heres the stupid question part).. I did install stock recovery via same toolbox, But How do I tell if it is stock vs twrp? I dont see where/how to check if it succeeded. Next- Why wont factory reset work to clear the flash counter, modified status to normal with full wipe? and as much as I admire mr Cortex method to full wipe ( 10 min process..) is that repetitive process of wiping, triangle away,unroot, reroot etc..necessary? I had a rooted samsung epic 4g touch before this note 2 and All I did to return phone to stock firmware for trade in was factory reset! yes- it was Not jellybean, was Gingerbread android.
Perhaps someone or some devs can explain this bit of mystery to me, and perhaps others... who are in search of a more direct and straightforward reset without complicating the steps. I will probably reroot and run a custom rom after warranty runs out.. but for now..stock again.

[Q] How To Root Samsung Galaxy SPH-D700 Epic 4G Using A Macbook Pro OS 10.8.4

Hey everybody,
I've researched this topic for days and I'm not coming up with any good solutions here.
Essentially, I am trying to figure out what the best firmware as of current date that runs really well on the Samsung Galaxy SPH-D700 Epic 4G.
I'm on 2.3.6 currently and from what I know the latest firmware for Android is 4.3 Jellybean. Is Jellybean available for the SPH-D700? If so, does it run well? If not, what's the next best alternative?
How do I root this phone using a Macbook Pro? I've read about "Wine", "Wine Bottler", "Heimleter" ( I don't think that's how it's spelled but I'm sure some of you know what I am talking about )
From what I have read, Wine doesn't seem like it's going to be very effective. Heim is more of a manual root which I could do but there isn't really a straight forward set of directions. The directions I've found have been written by many different sources and neither of them are the same.
If anybody has suggestions, I would greatly appreciate some. This will be the officially the 2nd phone I've ever rooted, the first being an HTC Hero and my 2nd droid phone ever owned.

DarkXShadowX21 said:
Hey everybody,
I've researched this topic for days and I'm not coming up with any good solutions here.
Essentially, I am trying to figure out what the best firmware as of current date that runs really well on the Samsung Galaxy SPH-D700 Epic 4G.
I'm on 2.3.6 currently and from what I know the latest firmware for Android is 4.3 Jellybean. Is Jellybean available for the SPH-D700? If so, does it run well? If not, what's the next best alternative?
How do I root this phone using a Macbook Pro? I've read about "Wine", "Wine Bottler", "Heimleter" ( I don't think that's how it's spelled but I'm sure some of you know what I am talking about )
From what I have read, Wine doesn't seem like it's going to be very effective. Heim is more of a manual root which I could do but there isn't really a straight forward set of directions. The directions I've found have been written by many different sources and neither of them are the same.
If anybody has suggestions, I would greatly appreciate some. This will be the officially the 2nd phone I've ever rooted, the first being an HTC Hero and my 2nd droid phone ever owned.
Click to expand...
Click to collapse
v4.3 isn't released yet, that I'm aware of, but v4.2.2 is released and stable (mostly).
For most yes it does run well, but for me JB roms and my list of apps installed leaves ~3-9MB of RAM remaining. So that causes crazy lag and is incredibly annoying. You basically have to try it out yourself with your apps and decide if it'll work for your needs.
You can use Odin (in Windows via bootcamp), or Heimdall (in Linux and possible OSX).

nikon120 said:
v4.3 isn't released yet, that I'm aware of, but v4.2.2 is released and stable (mostly).
For most yes it does run well, but for me JB roms and my list of apps installed leaves ~3-9MB of RAM remaining. So that causes crazy lag and is incredibly annoying. You basically have to try it out yourself with your apps and decide if it'll work for your needs.
You can use Odin (in Windows via bootcamp), or Heimdall (in Linux and possible OSX).
Click to expand...
Click to collapse
I don't have a Windows via bootcamp. I deleted that from my Mac last year. Is 4.2.2 available for the Epic 4G?
Do you have any good sources for how to root the Epic 4G from 2.3.6 to 4.2.2? It's been quite a long time since I've rooted. Thanks.
I would like to get my phone to be all set up with this.
http://forum.xda-developers.com/showthread.php?t=2131117

Well rooting or flashing a custom rooted rom is easy, if you can use Odin in Windows. I'm not familiar with Heimdall enough to give you a tutorial.
I posted this in a thread halfway down page 1 of Q/A:
nikon120 said:
TWRP: Flashes through CWM; OR you can pull the recovery.bin file from the zip file and flash that in Odin.
Root:
Power down device
Open keyboard, press and hold both the 1 key and power button. This places the phone into download mode.
Plug the device into your computer, and most likely drivers will install. Allow that to finish before proceeding.
Within Odin, wait until you see COM and a port number appear. That means your phone is recognized.
Next, uncheck all boxes on the left side, including auto-reboot.
Place the victory_8G_100528.pit file in the PIT box. Place CWM v5.0.2.7 .bin/.tar/.md5 file in the PDA box.
Click start and will complete relatively quickly.
Disconnect the phone from USB and pull the battery out.
Replace battery.
Press and hold Vol down, Camera and Power buttons until the capacitative lights light up, then release. This will place you in recovery mode.
From there you will boot into CWM, where you can flash whatever you want (custom rom or a compatible kernel for FC09 & SuperSU) off the SD card. So place those files prior to doing all the above.
Keep in mind, that if you want to remain on stock FC09, but rooted, you will need to flash a custom kernel. The stock kernel will replace CWM with stock recovery every time. That is why in the list above you must disable auto-reboot and battery pull.
All files are in my devhost, in my signature. If not, then they expired and I can reupload them if notified.
Click to expand...
Click to collapse
Just flash Avatar rom from your SD card when booted into CWM v5.0.2.7. Typically when coming from stock, you will be rebooted into a newer version of CWM that is MTD compatible and have to go through the same flashing steps as you just performed to flash Avatar. If you are still on the same CWM version (5.0.2.7), then you need to manually flash either TWRP (2.6.0.0 is current) or CWM (6.0.3.2 is current) before attempting to flash Avatar again.

Unfortuantely, Odin doesn't work for mac. Wine/Wine Bottler is extremely unpredictable. All I need is a way to root my Sph-D700 using the latest version of Mac OS without Windows via dualboot.
Heimdall seems to be the best solution but to be honest, I don't quite understand the procedure. I tried to do it earlier and I didn't have any luck. Since I'm posting this from my phone currently, I'll post the sources I tried in a bit when I jump back on the computer.
Here are the sources I have been trying to use:
http://wiki.cyanogenmod.org/w/Install_CM_for_epicmtd
http://www.glassechidna.com.au/products/heimdall/
http://www.youtube.com/watch?feature=player_embedded&v=1ILk3Dlo9Gg
Here are the steps I've tried taking.
1st Step: I download DRockStar's ClockworkMod Recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2nd Step:
I download Heimdall Suite 1.4RC1 Command-line Binary:
Place the libusb-1.0.0.dylib library from the zip inside /opt/local/lib on the machine.
I don't know where this folder is on my Mac. I've searched for it and it doesn't exist and it also doesn't specify where I should create it if necessary.
Building From Source: The source code for the Heimdall Suite is available on Github. For more details about how to compile the Heimdall Suite, please refer to the README provided on Github or refer to the instructions to Install and compile Heimdall.
I don't quite understand how to do this earlier. I'm pretty familiar with xCode since I am being taught how to use it from my University. Even with that being said, I'm still not understanding exactly how to build it from the source. I read through the read me and it seems a bit more advanced than what I know how to do. Even with following instructions, it's very confusing to follow.
Booting the phone into download mode is a given to me.
This doesn't relate to me since I am using a Mac.
Number 4: Place DRockStar's ClockworkMod Recovery file into the Heimdall directory.
I'm not sure exactly what this is asking to be honest.
Putting phone into download mode....
Here's what I type into Terminal. I've tried with and without Sudo and I always get the same error.
Also, Heimdall version 1.40 doesn't even recognize my device.
I also tried selecting the Avatar zip from the sd card from going into "Apply update from sdcard" and I got the following error.
This is where I am basically stuck at. I'm not sure what else to do honestly.

DarkXShadowX21 said:
This is the tar file I downloaded:
Zedomax Epic Touch Kernal v3.
Click to expand...
Click to collapse
Don't use that file. It's for the D710, aka Epic Touch.
Sent from my Nexus 7 using Tapatalk 2

nikon120 said:
Don't use that file. It's for the D710, aka Epic Touch.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Which file should I be using? I updated my last post with a bunch on information by the way.

To anyone else following this, I have responded on the Github issue:
https://github.com/Benjamin-Dobell/Heimdall/issues/149

DarkXShadowX21 said:
Hey everybody,
I've researched this topic for days and I'm not coming up with any good solutions here.
Essentially, I am trying to figure out what the best firmware as of current date that runs really well on the Samsung Galaxy SPH-D700 Epic 4G.
I'm on 2.3.6 currently and from what I know the latest firmware for Android is 4.3 Jellybean. Is Jellybean available for the SPH-D700? If so, does it run well? If not, what's the next best alternative?
How do I root this phone using a Macbook Pro? I've read about "Wine", "Wine Bottler", "Heimleter" ( I don't think that's how it's spelled but I'm sure some of you know what I am talking about )
From what I have read, Wine doesn't seem like it's going to be very effective. Heim is more of a manual root which I could do but there isn't really a straight forward set of directions. The directions I've found have been written by many different sources and neither of them are the same.
If anybody has suggestions, I would greatly appreciate some. This will be the officially the 2nd phone I've ever rooted, the first being an HTC Hero and my 2nd droid phone ever owned.
Click to expand...
Click to collapse
Have you tried using heimdall and the instructions found here?

Firmware for SM-T807P

Would anyone happen to know where I can get the firmware for the Sprint variant of the Galaxy tab S 10.5? I have the "Firmware Upgrade Encountered an Error issue" after attempting to root with CF Auto Root. Kies 3 says it doesn't support the tablet, Sammobile doesn't have it and im pretty sure I don't want to contact Samsung quite yet. Thanks in advance.

Yes sammobile doesnt have firmware yet for snapdragon version

I just found out this tablet just came out to sprint. Which caused cf auto root to fail. Which could also mean it isn't on Sam mobile yet.

Is this a common thing? Does sammobile rarely get them for the Snapdragon variants?

Not sure, when the tab s wifi one came out there was already roms for them.

BDA_Rival said:
Would anyone happen to know where I can get the firmware for the Sprint variant of the Galaxy tab S 10.5? I have the "Firmware Upgrade Encountered an Error issue" after attempting to root with CF Auto Root. Kies 3 says it doesn't support the tablet, Sammobile doesn't have it and im pretty sure I don't want to contact Samsung quite yet. Thanks in advance.
Click to expand...
Click to collapse
well...since u have already tried the worse thing possible which is to flash a fule meant for an exynos device on a qualcom chipset then u might as well try this suggestion since it cant really make things worse at this point & just MIGHT actually work. Instead of using the our cfautoroot attempt to use the tab pro SM-T525 cfautoroot (link below)...i just saw that someone suggested that in another thread but dont know if u have had chance to try it yet. Also....as @edan1979 suggested chainfire is pretty good about creating new root packages if u can get him the files that he requests. If u do get this thing rooted with the file below then please pos back because i have a few files i need from your device if its not too much trouble...thx in advacnce
http://download.chainfire.eu/393/CF-Root/CF-Auto-Root/CF-Auto-Root-picassolte-picassoltexx-smt525.zip
^TAB 10.1 LTE SM-T525 CFAUTOROOT (same chipset except for screen...just might be the magic fix)
on a related note....i have aso been searching for the new qualcom/carrier branded firmware files & culdnt find them on sammobile either so if someone finds the one for sprint or the att/verizon version (SM-T707) then please let me know.
@DUHAsianSKILLZ
Just to be clear...i saw in the other thread that u said the wifi root method worked so i'm wondering what version of the device do u actually own?
@BDA_Rival
Thats actually why i suggested trying the other method...at this point your tablet could POTENTIALLY already be bricked & flashing the file i suggested is not only harmless but COULD even bring your tab back from the dead because theres no telling how long it will be before the firmware files are available. Worse case u can return it to sprint & say it failed during an over the air upgrade...i would definitely try the link i added NOT for the root but as an attempt to revive the tablet

I dont even care about root at this point, id rather have my tablet boot up to the stock OS. And I'd rather not fully brick it.

@THEDEVIOUS1 in the other thread I didn't know he had a sprint LTE tab s. I own a WiFi version of the tab s 10.5 inch. Sorry for any confusion.

THEDEVIOUS1 said:
Thats actually why i suggested trying the other method...at this point your tablet could POTENTIALLY already be bricked & flashing the file i suggested is not only harmless but COULD even bring your tab back from the dead because theres no telling how long it will be before the firmware files are available. Worse case u can return it to sprint & say it failed during an over the air upgrade...i would definitely try the link i added NOT for the root but as an attempt to revive the tablet
Click to expand...
Click to collapse
so i tried this because why not, already went to a service center and they acted like theyve never seen my issue. before i tried this, i had the binary status saying custom and the kox counter said 0. i flashed this, it was successful finally and my knox counter is at 1 which is fine. it tries to boot up unlike before but restarts saying "Could not normal boot" but i atleast see the splash screen. one question i guess i have is what would happen if i flashed the firmware for th the sm-t525? not that im seriously contemplating but if its the closest, chipset wise, would it work? i dont really care about cellular signal and if i brick it, im probably better off calling sprint with a completely bricked tablet that they wouldnt know was once rooted than one that says custom binary and the knox counter set off.

Well at least that's an improvement...the Odin firmware file will most likely NOT flash due to security checks so the only real hope u have right now is to try the 525 cwm or twrp and & see if it will boot into recovery. If it actually works then u could attempt one of their custom roms (would probably remove the boot.mg first) or maybe even cm11 for the tab pro (would have to delete the assert lines in the updater script so it would even flash). U can also try the a qualcom note 3 custom recovery (if they work will probably have resolution issues) or the 10.1 note 2014 ones which has the same chipset and resolution also

THEDEVIOUS1 said:
Well at least that's an improvement...the Odin firmware file will most likely NOT flash due to security checks so the only real hope u have right now is to try the 525 cwm or twrp and & see if it will boot into recovery. If it actually works then u could attempt one of their custom roms (would probably remove the boot.mg first) or maybe even cm11 for the tab pro (would have to delete the assert lines in the updater script so it would even flash). U can also try the a qualcom note 3 custom recovery (if they work will probably have resolution issues) or the 10.1 note 2014 ones which has the same chipset and resolution also
Click to expand...
Click to collapse
do radios matter though? would it brick because im flashing a verizon rom and those use different radios, or would it be better to flash a wifi rom? i dont really care if i have mobile data, i only use wifi. if i flash a 525 twrp, it wouldnt disable odin mode, would it?

BDA_Rival said:
do radios matter though? would it brick because im flashing a verizon rom and those use different radios, or would it be better to flash a wifi rom? i dont really care if i have mobile data, i only use wifi. if i flash a 525 twrp, it wouldnt disable odin mode, would it?
Click to expand...
Click to collapse
I'm assuming Odin mode & download mode are the same thing so the answer is yes IF it works u would be able to do the key combination and boot directly into recovery from Odin mode...I would NOT flash the radio although it shouldn't harm anything but what we really want right now is to leave as much of the original file system in place as possible & the only thing that technically should be different at this point is the recovery partition. The wifi versions are exynos devices so NO do NOT flash those because that's how we ended up here in the first place...just follow my last reply & since I don't like to waste posts if u respond needing more help just check back here for a mention of your username

THEDEVIOUS1 said:
I'm assuming Odin mode & download mode are the same thing so the answer is yes IF it works u would be able to do the key combination and boot directly into recovery from Odin mode...I would NOT flash the radio although it shouldn't harm anything but what we really want right now is to leave as much of the original file system in place as possible & the only thing that technically should be different at this point is the recovery partition. The wifi versions are exynos devices so NO do NOT flash those because that's how we ended up here in the first place...just follow my last reply & since I don't like to waste posts if u respond needing more help just check back here for a mention of your username
Click to expand...
Click to collapse
so im not sure i understood the last part of your message about wasting posts but i figured youd want to hear this. So i download the TWRP for the SM-P905 (note pro 12.2) and after i flashed it through odin, the tablet restarted and booted all the way up. I dont get how the hell this worked but flashing TWRP fixed my OS not booting. I also went to settings to check my device status and it says custom. i want to install super su but i dont know if TWRP stuck for sure or not and i cant get TWRP to boot, it keeps taking me to download mode. any ideas? id like to make a back up in case something dumb happens.
Edit: Got into recovery by holding home button, volume up button, and power but it says "Recovery booting, Recovery is not SEANDROID ENFORCING", not too sure what that means. heres the weird part. after it shows that, the screen starts turning gold within a matter of 15 seconds.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ever seen that before?

BDA_Rival said:
so im not sure i understood the last part of your message about wasting posts but i figured youd want to hear this. So i download the TWRP for the SM-P905 (note pro 12.2) and after i flashed it through odin, the tablet restarted and booted all the way up. I dont get how the hell this worked but flashing TWRP fixed my OS not booting. I also went to settings to check my device status and it says custom. i want to install super su but i dont know if TWRP stuck for sure or not and i cant get TWRP to boot, it keeps taking me to download mode. any ideas? id like to make a back up in case something dumb happens.
Click to expand...
Click to collapse
Sorry but the last part wasn't that serious...I just don't like to run my post count up. ok...that's great news which confirms what I thought since all the cf root really does is flash an altered stock recovery, install root then flash stock back. So...what I would try at this point is to go ahead & install supersu & hope that it detects the su file (it technically should) & if/when it requests u to upgrade the file choose NORMAL method NOT twrp/cwm which will attempt to finalize the root WITHOUT needing to boot into twrp. I would try to avoid that because even if it stuck there may be problems with the fact that it is from another device and will potentially screw the partitions up worse.....I know this is not the best bet for a backup but I would avoid recovery until u can find the proper Sprint Odin firmware for your device & instead just useb titanium to backup up your apps, system settings, & whatever else u can with it for the time being. At this point I would just be satisfied with the fact that u now have a working device & wait to do anything further until u get the correct software to fully fix it...well I'm glad u were able to get it going and IF u in fact have real root then can i get a HUGE favor? I need the keyguard.apk as well the framework-res.apk & twframework-res.apk with the corresponding odex files of course (i wouldn't mind having systemui & both framework jars if possible also)...if u can't do it , don't know how or it's just too much trouble then don't worry about it but i just thought I'd ask since I've been trying to find snap versions these files
@BDA_Rival
U edited your post before I could finish my reply but long story short just leave recovery alone for right now...what u are seeing is most likely due to the different types of screens between the 12.2 & 10.5 so the display driver is causing that problem. No problem on the assistance...that's were all supposed to be here for
Just thought I'd throw this out there since u seem to be able to find your way back home now but maybe if u try the cfautoroot for the P905 12.2 note pro then MAYBE that will root it...just thinking out loud though
http://forum.xda-developers.com/showthread.php?t=1980683&page=24
^NOTE PRO 12.2 LTE P905 CFAUTOROOT (see post #235...just in case u get the guts to try it again good luck)

THEDEVIOUS1 said:
Sorry but the last part wasn't that serious...I just don't like to run my post count up. ok...that's great news which confirms what I thought since all the cf root really does is flash an altered stock recovery, install root then flash stock back. So...what I would try at this point is to go ahead & install supersu & hope that it detects the su file (it technically should) & if/when it requests u to upgrade the file choose NORMAL method NOT twrp/cwm which will attempt to finalize the root WITHOUT needing to boot into twrp. I would try to avoid that because even if it stuck there may be problems with the fact that it is from another device and will potentially screw the partitions up worse.....I know this is not the best bet for a backup but I would avoid recovery until u can find the proper Sprint Odin firmware for your device & instead just useb titanium to backup up your apps, system settings, & whatever else u can with it for the time being. At this point I would just be satisfied with the fact that u now have a working device & wait to do anything further until u get the correct software to fully fix it...well I'm glad u were able to get it going and IF u in fact have real root then can i get a HUGE favor? I need the keyguard.apk as well the framework-res.apk & twframework-res.apk with the corresponding odex files of course (i wouldn't mind having systemui & both framework jars if possible also)...if u can't do it , don't know how or it's just too much trouble then don't worry about it but i just thought I'd ask since I've been trying to find snap versions these files
Click to expand...
Click to collapse
so i tried root checker, it said no root, i tried installing super su, said no root as well. i guess even though my device status says custom, im not actually rooted i went ahead and tried that CF Autoroot you suggested earlier in Odin and it gave me a boot loop so i flashed TWRP again and now its booting all the way. still says im not rooted so i just dont think its gonna work. If it did, i would have gotten that stuff for you for all your help. thanks for helping out.