Related
The aluminum bumper from capdae looks nice. I like the black/gold especially, or maybe the all silver color. Has anyone tried it yet? I want to know how rigid it is, if it really is aluminum, and whether it is smooth and cool to the touch. Also wanted to know if the break where the two pieces snap together can be easily felt, and if the finish is good and smooth with no sharp or rough places. I've bought cheap snap-on hard cases and the break where they snap on was always rough and unpleasant.
Here's a video:
http://www.youtube.com/watch?v=kpNyO1AaOUg
Here's the same thing for the S2. It's easier to see the bumper.
http://www.youtube.com/watch?v=LRHvtTb4j-s
katamari201 said:
The aluminum bumper from capdae looks nice. I like the black/gold especially, or maybe the all silver color. Has anyone tried it yet? I want to know how rigid it is, if it really is aluminum, and whether it is smooth and cool to the touch. Also wanted to know if the break where the two pieces snap together can be easily felt, and if the finish is good and smooth with no sharp or rough places. I've bought cheap snap-on hard cases and the break where they snap on was always rough and unpleasant.
Here's a video:
http://www.youtube.com/watch?v=kpNyO1AaOUg
Here's the same thing for the S2. It's easier to see the bumper.
http://www.youtube.com/watch?v=LRHvtTb4j-s
Click to expand...
Click to collapse
I have one, it's pretty good! The frame itself is definitely aluminium (checked for solidity and sonorous...ity and confirm it's metal) Takes a little effort to snap it together, but once in place it's extremely solid with no flex whatsoever. The frame is also slightly raised at the back in each corner so the camera lens does not touch the "surface" when you put it down (something that was crucial to me and not clear from the pictures)
The only slight downside is that the metal is quite smooth so it's a little slippery compared to my previous leather case (unsurprising!) and the brushed effect is only average, would have preferred a "matte" effect but that's only a minor gripe.
As for sharp edges, the only edges I really notice are around the stylus gap but even these aren't particularly sharp, just 90° cuts.
This frame is definitely not going anywhere without the opening tool, that's for sure!
Why do people put these bumpers on their phones...I mean on a phone like the iPhone or S2 where it's small, I'd get it...but on a large phone like the Note....I just find it so fugly.
PoisonWolf said:
Why do people put these bumpers on their phones...I mean on a phone like the iPhone or S2 where it's small, I'd get it...but on a large phone like the Note....I just find it so fugly.
Click to expand...
Click to collapse
Considering it's up to them since they bought it..
Tell you what, you can buy me another Note and put whatever you want on it.
What kind of aluminum is it and how does it feel? Say in comparison to the iPad (abit rough but nice), iPad2/3 (a bit too smooth and not as rigid as first ipad), iPhone (stainless steel-ish), samsung phones like the s8500 wave and omnia 7 (brushed and too rough, not very rigid). I guess any household item or gadget to describe it would be nice. Would like to also know how much of a surface area increase does it provide over just the bare chrome trim, and whether it is easier and more comfortable to hold with it on. Holding it comfortably and securely is my main focus. Oh, also wanted to know whether there is any soft material in the inside, especially where it touches the front glass, to protect the phone from getting scratched by the frame.
katamari201 said:
What kind of aluminum is it and how does it feel? Say in comparison to the iPad (abit rough but nice), iPad2/3 (a bit too smooth and not as rigid as first ipad), iPhone (stainless steel-ish), samsung phones like the s8500 wave and omnia 7 (brushed and too rough, not very rigid). I guess any household item or gadget to describe it would be nice. Would like to also know how much of a surface area increase does it provide over just the bare chrome trim, and whether it is easier and more comfortable to hold with it on. Holding it comfortably and securely is my main focus. Oh, also wanted to know whether there is any soft material in the inside, especially where it touches the front glass, to protect the phone from getting scratched by the frame.
Click to expand...
Click to collapse
The only soft inside is on the back section in the four corners. The phone does not move around at all so there is no risk of scratching, which is also coupled with the fact that aluminium physically cannot scratch Gorilla Glass - in fact your screen will scratch the aluminium!
As for holding it, there is a certain degree of personal opinion involved. Some people would find the ridge on the back surface (the cutout of the frame where it meets the battery cover) uncomfortable, however I really like it because it provided a gripping point for your fingers when holding one handed a bit like the finger ridges on some digital cameras.
Size-wise, it only adds ~2mm on each side so not much of a difference.
The finish is brushed aluminium, so cannot be compared to any iDevice because they are all matte/sandblasted. The finish reminds me of the brushed aluminium of the Hyper Osiris PC case (mainly because I had one of these myself for a while) If you do a Google Images search and filter for large images you'll get a good view of the finish style. One thing for sure, it definitely does not flex when pushed anywhere!
capdase usually has good, reliable and cheaper cases for those on a budget i think in some you get a free screen gaurd too which is like killing two birds with one stone
nikethdesouza said:
capdase usually has good, reliable and cheaper cases for those on a budget i think in some you get a free screen gaurd too which is like killing two birds with one stone
Click to expand...
Click to collapse
Forgot to mention that bit, my Duo Frame came with a screen protector as well. Not applied it yet though!
I had this case on the HTC 8X in grey and it was easily one of the best cases I've ever had on any phone. The thinness, feel and texture was great.
As a first case for the HTC One I decided to buy this one but in black instead of grey to match with the light aluminum. It's a great case, it feels great, adds grip and the matte color is awesome. The grip and feeling on the back is superb. However, for that matte look, the black case texture/material is a little different than the one I had on the grey for the 8X.
It attracts finger prints and sweat or grease of your fingers. If it wasn't for this, this case would be perfect, at least for me.
If you don't live on a humid place or don't have have problems with finger prints, get this case by all means. Where I live it's almost 80%-95% humid all year so even if I don't have sweaty hands, it's inevitable that they get moist.
To sum up, it's a wonderful case, despite the problem with the smudges on the back. For that detail alone, it won't be for anyone as it would need to be cleaned two or three times a day to avoid the greasy/moist look on the back.
I do plan to get one in grey as the one I had on the 8X had an even better texture and feel and it didn't attract stains or finger prints at all. AT ALL. It was also a much of a darker grey that it showed on the pictures and I liked it even more when I got it.
For scratch protection, minimum bulk and great look and feel, this is a very good case.
View attachment 2097786 View attachment 2097787 View attachment 2097788 View attachment 2097789 View attachment 2097790
PS: I have a MEIFENG (Bear Motion) in grey and a black Nillkin case on the way. I will post about them when they get here.
WOW that looks amazing. never heard of this brand case i am going to have to pick one up. thanks for your review!!
My problem with the case is the open top and bottom.
djq said:
WOW that looks amazing. never heard of this brand case i am going to have to pick one up. thanks for your review!!
Click to expand...
Click to collapse
You are welcome. Incipio is a known brand but not in all countries, they make cases for almost every smartphone.
OGhoul said:
My problem with the case is the open top and bottom.
Click to expand...
Click to collapse
I like the open top and bottom because it adds to the lightweight of the case and allows the natural aluminum color to be displayed prominently. The accessibility of the USB port and the power button is great because there is nothing around them.
This kind of case is only for scratch protection but that's the kind I'm always looking for.
I've also recently purchased this case in black. I LOVE the look of this case and one of the main features I like is that it still manages to maintain the ultra slim look and feel of the HTC One. This case really does fit well and doesn't detract from the stellar good looks of the phone.
One thing I do look for in these slim cases is that if the top edge of the case is slightly raised above the glass. That's a positive for me as I do not use screen protectors. With the top edge of the case raised just a hair it makes it easier to put my phone face down without worrying about scratching the glass. The Incipio Feather does have this very slight edge thankfully.
The only downside so far is that I've had to return my first case due to cracks. The two top corners of the case started to show stress cracks for some reason. In fairness they could have already been there as the first case I bought was already opened at the store and could have been a previous return. I didn't really check it that closely. It could have also been from me being a little aggressive taking the phone out of the case once to show somebody how slim it was. It fits really well so I may have forced it a little too hard.
The store did replace the case as it was previously opened and I checked the new one pretty carefully so no issues so far with the replacement. I'll post back here if any cracks appear again. Just in case you get one, be careful removing or installing the case and you should be fine. If you want the ultimate in good looks, decent grip and scratch protection then you won't go far wrong with this one. If you're one of those folks that likes the big armoured cases then this one isn't for you and nothing to see here.
This case will give you some basic protection while still maintaining the look and feel of the phone. And admit it, the look and feel of the HTC One is at least half or more of the reason you bought this awesome phone in the first place! Cheers!
ajua said:
You are welcome. Incipio is a known brand but not in all countries, they make cases for almost every smartphone.
Click to expand...
Click to collapse
thats why i love this forum i learn something i may have never found out about
joudbren said:
I've also recently purchased this case in black. I LOVE the look of this case and one of the main features I like is that it still manages to maintain the ultra slim look and feel of the HTC One. This case really does fit well and doesn't detract from the stellar good looks of the phone.
One thing I do look for in these slim cases is that if the top edge of the case is slightly raised above the glass. That's a positive for me as I do not use screen protectors. With the top edge of the case raised just a hair it makes it easier to put my phone face down without worrying about scratching the glass. The Incipio Feather does have this very slight edge thankfully.
The only downside so far is that I've had to return my first case due to cracks. The two top corners of the case started to show stress cracks for some reason. In fairness they could have already been there as the first case I bought was already opened at the store and could have been a previous return. I didn't really check it that closely. It could have also been from me being a little aggressive taking the phone out of the case once to show somebody how slim it was. It fits really well so I may have forced it a little too hard.
The store did replace the case as it was previously opened and I checked the new one pretty carefully so no issues so far with the replacement. I'll post back here if any cracks appear again. Just in case you get one, be careful removing or installing the case and you should be fine. If you want the ultimate in good looks, decent grip and scratch protection then you won't go far wrong with this one. If you're one of those folks that likes the big armoured cases then this one isn't for you and nothing to see here.
This case will give you some basic protection while still maintaining the look and feel of the phone. And admit it, the look and feel of the HTC One is at least half or more of the reason you bought this awesome phone in the first place! Cheers!
Click to expand...
Click to collapse
I'm very careful with my phones and cases. I hope yours was only a detail you didn't see when you bought it.
How are you doing with the finger smudges on the back of this case? It's better than I initially thought but I still have to clean it often.
djq said:
thats why i love this forum i learn something i may have never found out about
Click to expand...
Click to collapse
Everyone is learning something on this forum all the time
Just something i've noticed since i bought this case. Both the small strips on the sides have cracked. The case is awesome and i really don't care but be for-warned if you are picky.
Tuppidsay said:
Just something i've noticed since i bought this case. Both the small strips on the sides have cracked. The case is awesome and i really don't care but be for-warned if you are picky.
Click to expand...
Click to collapse
You can contact Incipio about this. The case comes with a one year warranty and I'm sure they'd be willing to cover that and replace it.:good:
I've bought a few cases for the One and this is definitely my favorite, all the rest I enjoyed but missed the slim line feel. The incipio is the best of both worlds.
Sent from my HTC_PN071 using Tapatalk 4 Beta
Just ordered one of these.
I'm seeing a lot of reviews on Amazon with the lighter colored ones hazing up flash pictures. Seems to be a common thing with close cutouts for the LED. Black cases are going to be the best to avoid flash interference.
Got mine and yes it's definitely one of the most minmalist cases I've ever used. Be careful with this one as it doesn't afford much in the way of drop protection but you already knew that...
The lip over the screen is a bit shorter than I'd like, still need to be wary of setting it down screen down just in case.
However for those that prefer the naked feel but don't want to be paranoid of scratching the back when sitting on a table, you will like this!
Be wary the plastic cutout piece along the top where the volume rockers and usb charging port are quite thin and can break if stressed too hard when putting the case on and especially taking it off, just take you time and be gentle.
The black finish does show finger grease but is easily cleaned. The incipio dual is the same way. At least it doesn't scratch super easy like some of the smooth and glossy backs.
No case is perfect, that's why I have a drawer full of different cases!
I like the minimalist look, but does anyone know of any similar type 'snap on' cases that has a bigger lip over the corners/edges so that the screen is more protected?
My friend has this case in grey, and hers started peeling/chipping on the back after a few months of use. She contacted Incipio and they'll be sending her a new case which is good...
I picked up a case for my HTC One at best buy. It looks 100% identical except for the logo on the back of the case. Very nice case.
icepixie said:
I like the minimalist look, but does anyone know of any similar type 'snap on' cases that has a bigger lip over the corners/edges so that the screen is more protected?
My friend has this case in grey, and hers started peeling/chipping on the back after a few months of use. She contacted Incipio and they'll be sending her a new case which is good...
Click to expand...
Click to collapse
There is the Poetic Palette and Nillkin Hard Case/Shell. I can't say about the front lip for the screen as I don't own them but you can search for pictures and see if it is more prominent than the lip on the feather.
Looks nice and very slim!! :laugh:
Where can I find power bank wireless charger?
Where can I find power bank wireless charger?
I want to get one.How Can i get it
I dislike the way the edges of the phone are angled toward the front face - I'd much prefer them to be just flat and squared off to the front and back (like the iphone). Are there any cases that give you this feel - at least to some extent? It'd also be nice if it flattened out the "convexity" of the back too. Anything that might increase tactile feel/responsiveness of the standard buttons is a bonus.
I'm currently learning toward the Diztronic TPU case.
Any thoughts?
I have the diztronic and it's a good case, was my go-to case for the last little while. Because the material is not slippery and it's a slightly bulkier case, you don't notice the convexity of the back. The phone is pretty "stable" as a result when it's on a flat surface. Regarding the sides, it's a border of sorts with a small ridge in the case between the sides and the back. This will probably give you the feeling of the sides being squared off.
@Neon01 ... I'm sorry for asking this but why did you bought this phone if you do not like at all the construction ?
icepixie said:
I have the diztronic and it's a good case, was my go-to case for the last little while. Because the material is not slippery and it's a slightly bulkier case, you don't notice the convexity of the back. The phone is pretty "stable" as a result when it's on a flat surface. Regarding the sides, it's a border of sorts with a small ridge in the case between the sides and the back. This will probably give you the feeling of the sides being squared off.
Click to expand...
Click to collapse
Thanks, that sounds perfect.
ro_explorer said:
@Neon01 ... I'm sorry for asking this but why did you bought this phone if you do not like at all the construction ?
Click to expand...
Click to collapse
Who said I didn't like the construction? It's the only Android ever sold (from what I can tell) with iphone build quality (or better). I'm not enough of a fanboy of any product not to call out bad ergos when I feel them. The chamfered edges of the One are atrocious. I hated them on the One X, and I hate them on the One. They're angled the wrong way, IMO, but just squared off would be best. The back is not really as much of an ergo thing, but it gives the phone a weird thicker feel. It doesn't help that (with no case), when set down, the center of gravity is directly over the camera glass due to the convexity. These aspects aren't enough to drive me away from what I otherwise consider to be a phenomenal phone, but I'll try to minimize them where I can.
Well ... I find the ergonomics of the phone excellent and I have no complain about the angles of the edges .. on the contrary, I like the feel in the hand.
Check my post on page 190 second from the top, I have a case that has an flat back like you want. It does add some bulk because it builds up the edges to be flat but I love the case and feels great. Hope it helps!
http://forum.xda-developers.com/showthread.php?t=2171713&page=190
We got an Moto X last week and a 2nd one on Monday Sale..
We got a case for the 1st one but it covers up the MotoMaker design.
Like the clear back and the rubber sides.
Any thoughts or feed back?
http://www.motorola.com/us/Air-Jack...-Jacket-Grip-for-Moto-X-by-Power-Support.html
I got one yesterday and I really like it. The rubber on the sides seal up to the bezel really nice and it fits snug. Adds just enough grip to it feel secure holding it (I don't like slippery devices!)
My first case was the clear plastic shell by inCase and I wasn't a fan. The plastic felt really slick & had no grip, and held on to smudges FOREVER. The AirJacket's plastic is a lot easier to wipe clean.
That looks like a really nice case. Even with last week's 30% off though, I couldn't justify that much for a case.
I like the one I got, except for the orange color. Is this odd pastel orange. Good quality though
Sent from my XT1058 using Tapatalk
Thank you able to post any pics..?
On the Monday sale at 350 for the phone and 30% on the case its till an amazing price for a phone with a nice case!
My main issue with the case is that it is so hard to get on and off the phone
Sent from my XT1060 using xda app-developers app
wwr8bz said:
My main issue with the case is that it is so hard to get on and off the phone
Sent from my XT1060 using xda app-developers app
Click to expand...
Click to collapse
I found the trick to that.
When putting it on--but the bottom of the phone in first, then slide the top over.
Reverse this for taking it out of the case. (Start at bottom, go to top.)
Anyone know the difference between the InCase clear case and the Air Jacket Clear case? I ordered the Air Jacket one, but haven't seen any reviews except on the InCase one.
v3rn said:
Anyone know the difference between the InCase clear case and the Air Jacket Clear case? I ordered the Air Jacket one, but haven't seen any reviews except on the InCase one.
Click to expand...
Click to collapse
I have both of these cases. I ordered the clear InCase with my phone off of the Moto Maker. It fit the phone fairly snug, but it seemed to feel like cheap plastic to me. It would act like a magnet for skin oils and finger prints and then was nearly impossible to get completely clean again. The molding of the edges that grip the phone seems kind of funny, because if you look at it pretty straight on it looks like there are paint chips in the plastic or something. Getting it off the phone always felt impossible, too! The whole thing felt very poorly made.
The Air Jacket I just got is a whole other story. The plastic on the back feels a lot better and doesn't have as much of the issue with finger prints. The rubber on the sides is grippy but not enough to be distracting. I feel a lot more confident holding this phone in my hand as I walk down the street, mainly in that I don't think it might slip out of my hand on accident.
I got the orange Air Jacket to go with my phone's metallic orange accents. The orange on the case is a little brighter and more washed out, but I still think it looks nice. I have a couple photos of both cases attached. Sorry if you are interested in seeing the phone in the clear InCase! I am not motivated enough to go through the hassle of swapping them again!
Edit: My attached photos aren't working for me so I'm guessing its not working for anybody else. Here are some linked photos, instead.
http://files.h4xful.net/airjacket1.jpg
http://files.h4xful.net/airjacket2.jpg
http://files.h4xful.net/airjacket3.jpg
geeksunny said:
I have both of these cases. I ordered the clear InCase with my phone off of the Moto Maker. It fit the phone fairly snug, but it seemed to feel like cheap plastic to me. It would act like a magnet for skin oils and finger prints and then was nearly impossible to get completely clean again. The molding of the edges that grip the phone seems kind of funny, because if you look at it pretty straight on it looks like there are paint chips in the plastic or something. Getting it off the phone always felt impossible, too! The whole thing felt very poorly made.
The Air Jacket I just got is a whole other story. The plastic on the back feels a lot better and doesn't have as much of the issue with finger prints. The rubber on the sides is grippy but not enough to be distracting. I feel a lot more confident holding this phone in my hand as I walk down the street, mainly in that I don't think it might slip out of my hand on accident.
I got the orange Air Jacket to go with my phone's metallic orange accents. The orange on the case is a little brighter and more washed out, but I still think it looks nice. I have a couple photos of both cases attached. Sorry if you are interested in seeing the phone in the clear InCase! I am not motivated enough to go through the hassle of swapping them again!
Edit: My attached photos aren't working for me so I'm guessing its not working for anybody else. Here are some linked photos, instead.
http://files.h4xful.net/airjacket1.jpg
http://files.h4xful.net/airjacket2.jpg
http://files.h4xful.net/airjacket3.jpg
Click to expand...
Click to collapse
Thanks for the pictures and thoughts. I actually got the clear air jacket case. It doesn't have the rubber bumper, its similar to the incase clear, but supposedly has a self healing plastic. But if you like the clear plastic on the normal air jacket, its probably the same as on the case I ordered.
geeksunny said:
I have both of these cases. I ordered the clear InCase with my phone off of the Moto Maker. It fit the phone fairly snug, but it seemed to feel like cheap plastic to me. It would act like a magnet for skin oils and finger prints and then was nearly impossible to get completely clean again. The molding of the edges that grip the phone seems kind of funny, because if you look at it pretty straight on it looks like there are paint chips in the plastic or something. Getting it off the phone always felt impossible, too! The whole thing felt very poorly made.
The Air Jacket I just got is a whole other story. The plastic on the back feels a lot better and doesn't have as much of the issue with finger prints. The rubber on the sides is grippy but not enough to be distracting. I feel a lot more confident holding this phone in my hand as I walk down the street, mainly in that I don't think it might slip out of my hand on accident.
I got the orange Air Jacket to go with my phone's metallic orange accents. The orange on the case is a little brighter and more washed out, but I still think it looks nice. I have a couple photos of both cases attached. Sorry if you are interested in seeing the phone in the clear InCase! I am not motivated enough to go through the hassle of swapping them again!
Edit: My attached photos aren't working for me so I'm guessing its not working for anybody else. Here are some linked photos, instead.
http://files.h4xful.net/airjacket1.jpg
http://files.h4xful.net/airjacket2.jpg
http://files.h4xful.net/airjacket3.jpg
Click to expand...
Click to collapse
Nice, just to confirm cause in your pics it looks like it doesn't, but does this case hit the screen at all on the edges? I ask because I am curious if it would cause any screen protectors to lift on the corners like some TPU cases do because they hit the screen.
Thanks
The rubber does not extend past the bezels at all so you should never have that problem. In fact at the edge of the case you can see a tiny bit of the bezel.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Screen on table
Does the case make it so the screen no longer touches a table if you were to place it screen down? Thanks for the info
Raistlin1 said:
Nice, just to confirm cause in your pics it looks like it doesn't, but does this case hit the screen at all on the edges? I ask because I am curious if it would cause any screen protectors to lift on the corners like some TPU cases do because they hit the screen.
Thanks
Click to expand...
Click to collapse
What Jayrod already said on this is correct. You will still see a small sliver of the bezel.
lionman229 said:
Does the case make it so the screen no longer touches a table if you were to place it screen down? Thanks for the info
Click to expand...
Click to collapse
Yes, the case will lift the screen up away from the surface its sitting on. I usually place mine face down when I'm at my desk. No problems.
I ordered the Air Jacket Grip from Motorola and one of the anti-glare screen protectors. I think they both fit nicely on the Moto X. Does anyone know if there's a holster solution that works well with this case? I've been back and forth on all my phones between holsters and pocket carry. I was just wondering if Air Jacket made a holster for this case or if I'd have to go generic pouch.
I've been using my moto X with the air jacket case and the brilliant screen protector for about a week now. I'm really liking both. My biggest gripe about screen protectors was the way they felt. My previous ones felt too gummy and made it annoying to use so I would always rock the phone naked. The brilliant is as smooth as the glass. It does attract fingerprints and smudges but they wipe away easily enough.
Thank you..got the phone and the Air Jacket today and love the case!
It matches the Moto Maker Lime Yellow so great mix.
Real comfortable to use and good protection.
With the $350 purchase and 30% accessories it was great value vs the 1st Moto X I got at full price and returned for the difference!
Just put the Air Jacket Grip on my wife's and the regular Air Jacket on mine (they didn't have the color I wanted). Both cases fit very nicely, with minimal bulk, and don't appear to overlap the screen. They wrap just enough of the bezel to keep them firmly in place. Both models are super thin, lightweight, and follow the contours of the phone perfectly. Each has its pros/cons.
The Air Jacket Grip was fairly difficult to attach, and covers the buttons so if you're in love with your accent color, you'll lose some of it. This is offset by the fact that the transparent plastic "transmits" the color of the rubberized grips to all the visible edges of the plastic, so you pick up color accents all around your camera, speaker, and all the other cutouts. Kinda cool fiber-optic-like effect. The other obvious thing is the edge is grippier, but not nearly as much as I expected.
The regular Air Jacket has cutouts for all the buttons, so it doesn't hide the accent color, and is a breeze to attach. It covers much less of the front of the phone too than the grip version, because it doesn't wrap around the top or bottom of the phone. It's also extremely slippery.
Wade-0 said:
The regular Air Jacket has cutouts for all the buttons, so it doesn't hide the accent color, and is a breeze to attach. It covers much less of the front of the phone too than the grip version, because it doesn't wrap around the top or bottom of the phone. It's also extremely slippery.
Click to expand...
Click to collapse
I just received my regular Air jacket today and you're absolutely right about it being slippery. I'm glad they designed it to where I can still place my finger in the dimple though.
Got mine and fought like hell to install. Silver is not silver. More like white. Returning.
Also don't like how hard it is to push the buttons.
On to the next. (i have 5 total-mostly cheap one's from amazon)
Hey all. Ordered my Moto X :victory: but the ebony back is backordered until at least 2/11 So, at least I have time to figure out what accessories I want. Right now, I'm looking for an "unobtrusive" case/bumper.
With a really nice back, and custom accents, I don't want to cover either of them up. I was initially looking at bumpers so I can keep the back open (to show off the ebony) and the dimple exposed (because everyone seems to be obsessed with it). While there are plenty of those, they all seem to come with button covers. Why cover the buttons on a phone where the buttons have been customized?
Next, I figured I would look at some cases with clear backs. The only one I could find that was clear, and that left the dimple exposed, was the incase snap case (available on Motorola's site for too much damned money). On top of that, I know people with the case that don't like it (because it's too tight), or have read reviews indicating that the tightness ended up cracking the screen (an outlier, I'm sure).
I'd prefer to find a bumper with the buttons exposed. Failing that, I would like to find a case with a clear back, cutout for the dimple, and isn't ridiculously bulky and/or expensive. Any help would be appreciate, thanks.
I decided to go with a bumper for my Moto X and got this one: http://amzn.com/B00F2YEIXO
The downside to any bumper would be that it will cover the buttons, but the accent color around the camera will still be visible and the dimple will still be there.
This is the SUPCASE: http://amzn.com/B00E8GQHM2 It's similar to bumper but has a clear back and keeps the dimple
A few other cases I found:
http://amzn.com/B00EI7CX1A
http://amzn.com/B00F9KI9Z4
http://amzn.com/B00EWL5YYA
Hikikomori-Otaku said:
I decided to go with a bumper for my Moto X and got this one: http://amzn.com/B00F2YEIXO
The downside to any bumper would be that it will cover the buttons, but the accent color around the camera will still be visible and the dimple will still be there.
This is the SUPCASE: http://amzn.com/B00E8GQHM2 It's similar to bumper but has a clear back and keeps the dimple
A few other cases I found:
http://amzn.com/B00EI7CX1A
http://amzn.com/B00F9KI9Z4
http://amzn.com/B00EWL5YYA
Click to expand...
Click to collapse
Thanks. Yeah, I noticed that every single bumper has the buttons covered. I don't get that. I mean, they have cutouts for headphones, USB, SD card, etc. Why can't they leave a cutout for buttons? Doesn't make sense.
I was in your shoes back when I first got my moto x. I rejected the in case snap case for the same reason.
I ended up just using mine naked with a pouch. Still in perfect condition two months later. You will find that you can't beat the feel of a naked moto x. I am super protective and will put on a bumper if the situation calls for it though. So maybe going naked (at least situationally) is something you may want to consider although I know I never would have initially since I'm the protective type and it would kill me to see a scratch or crack on my phone.
I had a TPU case on mine for the longest time that had the buttons covered. I hated it because I couldn't always tell where the buttons were on the side.
I just received this new bumper case and so far I love it. EDIT: I just saw that someone already linked to it.
It does cover the buttons, but the way it is made, they are raised on the case and have a great feel when clicked. It does not cover the back at all. Also note that I have a zagg style protector on the back of the phone so I'm not worried about scratches on the back.
I have both the SupCase and this bumper (appears the same as the Amazon one and the other eBay one linked above) and I really like the cheapo bumper better than the SupCase. The button covers on the bumper actually have a better tactile feedback than the naked phone itself.
Can I ask why you don't want the buttons covered? Most of my cases on my Nexus 5 has the buttons exposed and I wasn't a fan of that (nor was I a fan of the cases with bad covers for the buttons - those suck too). IMHO, the cheap bumper I have has somehow managed to have a good implementation for the button covers! I'm not a huge fan of the SupCase's covers for the buttons.
Side note: The dimple on the wood backs aren't nearly as nice as the dimples on the plastic backs. It's much more subtle instead of being an obvious place to hold/balance/control your phone from. While it's there, it's not something to rave about. The dimple on the plastic backs, on the other hand, are nice. I'm a bit jealous, honestly. (I have an Ebony/black/black)
Jaxidian said:
Side note: The dimple on the wood backs aren't nearly as nice as the dimples on the plastic backs. It's much more subtle instead of being an obvious place to hold/balance/control your phone from. While it's there, it's not something to rave about. The dimple on the plastic backs, on the other hand, are nice. I'm a bit jealous, honestly. (I have an Ebony/black/black)
Click to expand...
Click to collapse
I like that the wood backed Moto X's have shallower/smoother dimple. I've held a "regular" black Moto X with the carbon back and I didn't like how the edges around the dimple felt. With the bamboo back I have, it's all smooth and my index fingers rests very nicely there.
Hikikomori-Otaku said:
I like that the wood backed Moto X's have shallower/smoother dimple. I've held a "regular" black Moto X with the carbon back and I didn't like how the edges around the dimple felt. With the bamboo back I have, it's all smooth and my index fingers rests very nicely there.
Click to expand...
Click to collapse
Very fair opinion! I guess my point wasn't (or shouldn't have been) so much that it's worse but moreso that it is definitely sublte yet quite different.
8_8 said:
I was in your shoes back when I first got my moto x. I rejected the in case snap case for the same reason.
I ended up just using mine naked with a pouch. Still in perfect condition two months later. You will find that you can't beat the feel of a naked moto x. I am super protective and will put on a bumper if the situation calls for it though. So maybe going naked (at least situationally) is something you may want to consider although I know I never would have initially since I'm the protective type and it would kill me to see a scratch or crack on my phone.
Click to expand...
Click to collapse
Well, I gave it my best try to go naked, but just couldn't do it. I saw a video of a guy taking a knife to the Moto X screen and not leaving any marks, so I decided to forgo my usual policy of slapping a Zagg InvisibleShield on everything. But, I forgot how "smudgy" these screens get without a protector. So, I just ordered a Ghost Glass tempered screen protector http://mimeusa.com/product/moto-x-ghost-glass-screen-protector/ I never tried tempered glass before (didn't even know it existed), but it sounds interesting.
The ebony wood back is also getting all fingerprinted-up, which was making me twitch. I found some good feedback in various posts on the Power Suppor Air Jacket Clear (not the Grip) http://www.powersupportintl.com/Air-Jacket-Clear-for-Moto-X-p/mmtx-71.htm It's supposed to be much better than the Incase Snap Case.
Jaxidian said:
I have both the SupCase and this bumper (appears the same as the Amazon one and the other eBay one linked above) and I really like the cheapo bumper better than the SupCase. The button covers on the bumper actually have a better tactile feedback than the naked phone itself.
Can I ask why you don't want the buttons covered? Most of my cases on my Nexus 5 has the buttons exposed and I wasn't a fan of that (nor was I a fan of the cases with bad covers for the buttons - those suck too). IMHO, the cheap bumper I have has somehow managed to have a good implementation for the button covers! I'm not a huge fan of the SupCase's covers for the buttons.
Side note: The dimple on the wood backs aren't nearly as nice as the dimples on the plastic backs. It's much more subtle instead of being an obvious place to hold/balance/control your phone from. While it's there, it's not something to rave about. The dimple on the plastic backs, on the other hand, are nice. I'm a bit jealous, honestly. (I have an Ebony/black/black)
Click to expand...
Click to collapse
I just wanted to keep my customized buttons exposed. I mean, why pay all this money for a customized phone and cover it up?
I bought the first one posted with the weird tab on it. although the buttons are covered, they are highly functional. I do agree that if you customized the accents / buttons you want to show them off, should be easy to cut the button covers out with an xacto knife (done this before on several TPU cases)
good luck!
byt3b0mb said:
I bought the first one posted with the weird tab on it. although the buttons are covered, they are highly functional. I do agree that if you customized the accents / buttons you want to show them off, should be easy to cut the button covers out with an xacto knife (done this before on several TPU cases)
good luck!
Click to expand...
Click to collapse
Do NOT cut the button covers, I've tried that and found that can NOT reach the buttons with my finger. The bumper is too thick. Lucky I bought 2 bumpers so I have another one to use.
yghrv said:
Do NOT cut the button covers, I've tried that and found that can NOT reach the buttons with my finger. The bumper is too thick. Lucky I bought 2 bumpers so I have another one to use.
Click to expand...
Click to collapse
you can cut the buttons out, but you have to cut them to match the curve of your finger, meaning that they would need to look like this
) for the left side and ( for the right side.
I just need something like this, but not with half assed cutting.