TPU case review Belkin - T-Mobile Samsung Galaxy S II SGH-T989

Hey guys,
I got another case and went ahead and wrote a review for you. Its a glossy black tpu case made by belkin..Its thin, slick and comfortable. an ok case overall
Belkin TPU case Galaxy s2 - YouTube

I picked this one up when I got my SGS2, and I'm really impressed with it myself.
I've used cheap TPU cases from eBay on my other phones before, which, while decent, had fitting issues and a lot of flash (excess plastic) around the outside edges.
This Belkin TPU case is tight fitting, very little flash (two little tabs I found and removed with an xacto knife), and feels really quality in my hand.

dmcnelly said:
I picked this one up when I got my SGS2, and I'm really impressed with it myself.
I've used cheap TPU cases from eBay on my other phones before, which, while decent, had fitting issues and a lot of flash (excess plastic) around the outside edges.
This Belkin TPU case is tight fitting, very little flash (two little tabs I found and removed with an xacto knife), and feels really quality in my hand.
Click to expand...
Click to collapse
Def better than a cheap tpu ebay one..those are awful lol. fitting of this case is great ..havent dont the xacto knife fix for it tho..Might try that out

Hows the grip on these?

Natureboy72 said:
Hows the grip on these?
Click to expand...
Click to collapse
Grip is decent.. Its tpu so the material itself even tho it looks pretty shinny still retains it grip. A matte finish will def be grippier however this case does it just fine

thanks for the review. the gloss just ruins the case for me. I ordered a TPU case on Ebay for $9 and it has matted back and a glossy edge. It also has very high rating on Amazon.
I also suckered in for the D30 at T-mobile store after reading many good reviews on it

I'm with you. I'm a matte case guy myself

Related

[Q] Best thin case for Captivate

What is the best thinnest case for the samsung captivate!
Don't know what your parameter for "thin" is but I found the TPU cases from ebay to be the best. I had tried a BodyGlove case and a generic silicone case but found them too thick (the silicone case looked ugly too IMO - dull & attracted too much lint). The TPU case I got from ebay has been great - glossy yet grippy. Adds about a mm top & bottom.
I have tried three different cases and found that thr "Body Glove" seems to be the one I end up using the most. It is very thin, tight fitting and feels good while holding the phone. There are really several good choices around. This is of course IMHO.
Sent from my SAMSUNG-SGH-I897 using XDA App
i use the bodyglove case with the diagonal lines on the back. my brother uses the sedio one that snaps in 2 and has the smooth body. the body glove is a little thinner and looks more stylish. both are around 15-20 dollars. i prefer the body glove one because of the back actually, just adds a little touch to an otherwise plain looking phone. both are nice because they dont pick up dust and lint like the cheapo 2 dollar ones. you can tell quality by the seams of the rubber and smell. you get what you pay for. if your phone is worth 400, why spend 2 dollars on a case right?
fastkx450 said:
What is the best thinnest case for the samsung captivate!
Click to expand...
Click to collapse
How much protection are you wanting exactly?
Just picked up the Body Glove yesterday. Really like it, doesn't collect dust and very thin. Good fit also.
http://www.amazon.com/gp/product/B003VQS43U/ref=oss_product
Cheap, looks good (can't really see the pattern except at a certain angle), protects great, and is the thinnest protective case I've seen.
Check these out. They are not as sticky as regular silicone skins and they are fairly thin + cheap.
http://cgi.ebay.com/WHITE-TPU-CASE-...137991?pt=PDA_Accessories&hash=item3cb26715c7
http://cgi.ebay.com/SMOKE-Crystal-S...139274?pt=PDA_Accessories&hash=item5d2d4f700a
http://cgi.ebay.com/BLACK-TPU-SKIN-...791504?pt=PDA_Accessories&hash=item415455ec90
http://cgi.ebay.com/ORANGE-TPU-SKIN...810059?pt=PDA_Accessories&hash=item19c287018b
6 for 11$
http://cgi.ebay.com/6-x-Color-TPU-G...296126?pt=PDA_Accessories&hash=item3f06a32a3e
http://cgi.ebay.com/2x-Tpu-Gel-Case...544565?pt=PDA_Accessories&hash=item5ade97c375
http://cgi.ebay.com/Red-TPU-Crystal...340454?pt=PDA_Accessories&hash=item19c2cc2266
Body Glove is pretty darn thin. I have one but I replaced it with the Otterbox Commuter, just to change things up. Commuter is a bit thicker but I don't mind it at all so I am sticking with it. I do recommend the Body Glove though. Good sleeve.
Plus one for body glove.
Its perfect. Smooth enough that it comes out of pocket easy, but grippy enuff that I can throw it on dashboard without it flying off with the first turn I make.
I also think it looks great, fits perfectly, and I can hold the phone without dropping it-which is the reason I wanted it in the first place
are you looking for a hard case or skin? body glove or a tpu skin is your best bet for the thinnest protection but if you want a hard case then check out Seidio innocase surface
I just got a Xmatrix case (I think its a knock off as its not rubberized anywhere) but the fit is great and gives you a near naked feel. Covers the back and adds a bit to the front edge so the screen does not touch a flat surface if you lay it face down.
MobileNick said:
Don't know what your parameter for "thin" is but I found the TPU cases from ebay to be the best. I had tried a BodyGlove case and a generic silicone case but found them too thick (the silicone case looked ugly too IMO - dull & attracted too much lint). The TPU case I got from ebay has been great - glossy yet grippy. Adds about a mm top & bottom.
Click to expand...
Click to collapse
I just ordered one of these today, sounds like a good one.
Amzer argyle for $4
Sent from my GT-I9000 using XDA App
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290487171195&ssPageName=STRK:MEWNX:IT
I just ordered this case - its the slimmest/nicest looking imho, I am currently using the otterbox defender case - which i like, its a bit on the bulky side, but does offer excellent protection - my only real complaint with it is that its a pain to get the the battery if needed - have to take the rubber off, then separate the case and remove the phone from it to gain access to the back cover...
jgc121 said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290487171195&ssPageName=STRK:MEWNX:IT
I just ordered this case - its the slimmest/nicest looking imho, I am currently using the otterbox defender case - which i like, its a bit on the bulky side, but does offer excellent protection - my only real complaint with it is that its a pain to get the the battery if needed - have to take the rubber off, then separate the case and remove the phone from it to gain access to the back cover...
Click to expand...
Click to collapse
Looks just like a TPU case which if you don't mind having a not as fancy case you can get the Amzer one on amazon for $5 shipped and the knockoff ones on ebay for about $3-4 shipped. But the case you linked to is one very nice looking case.
All nice looking cases. I may have to try the TPU out. Looks nice.
Sent from my SAMSUNG-SGH-I897 using XDA App
bay_wolf said:
http://www.amazon.com/gp/product/B003VQS43U/ref=oss_product
Cheap, looks good (can't really see the pattern except at a certain angle), protects great, and is the thinnest protective case I've seen.
Click to expand...
Click to collapse
+1
That Amzer case does it's job very well. It protects, looks good, thin and is subtle in a good way. The fact that it is now ~$6.00 makes it an absolute steal. I usually don't buy cheap stuff for my phone (or for anything for that matter) but this case performs like a $20 case.
Only issue I have with it is that mine seem to be less snug than it was when I first got it. I only take off my case when I have to do a battery pull so it's a bit surprising that it got loose so easily. I recently bought a Otterbox Commuter to replace this case because I was getting bored with it but I wouldn't say I changed because it was necessary; it was just cause I was bored and I found a good deal for it.
+1 for the xmatrix case. It's a hard case but very slim and is a good fit without any movement or shuffling. Plus, there is a minor lip on the front so you can rest it face down.
It snaps on in the back...just one piece.
Body glove for sure best slim streamline case
Sent from Serendipity 5.3 Captivate via XDA app

[Q] Rubber sort of case, non-stick material?

Hi,
My friend showed me his iPhone case, and it was some sort of hard-ish rubbery clear stuff that doesn't get caught when you slip it into your pocket, etc.
I can't remember the name of the material, but it felt really nice and I really hope there is a version of it for the sgs2. Anyone got any ideas?
Thanks
The sticky, "traditional" rubber material is silicone, AFAIK.
The "modern", non-sticky material is called TPU, an abbreviation for Thermoplastic polyurethane.
You should find plenty of those cases on eBay or other platforms.
cold_reading said:
The sticky, "traditional" rubber material is silicone, AFAIK.
The "modern", non-sticky material is called TPU, an abbreviation for Thermoplastic polyurethane.
You should find plenty of those cases on eBay or other platforms.
Click to expand...
Click to collapse
yes there are very cheap and good quality tpu cases, look for "s line" cases on ebay, are really well-made
I got this case for my S II and its nice. It fits perfectly and it feels nice.
And my S II is kinda safer now
http://www.ebay.com/itm/Blcak-Color...361850?pt=PDA_Accessories&hash=item3cc2bf68ba
Houselegend said:
I got this case for my S II and its nice. It fits perfectly and it feels nice.
And my S II is kinda safer now
http://www.ebay.com/itm/Blcak-Color...361850?pt=PDA_Accessories&hash=item3cc2bf68ba
Click to expand...
Click to collapse
Looks nice, But doesn't that make your slim SGS2 a bit thick ?
I recommend the Incipio NGP. One of the most solid cases I've ever used and not overpriced.
+1 for the Incipio NGP
Try this, very good case for S2
http://www.momax.net/en/Product_Show.aspx?ID=1475&T=1
My second case was a white TPU case on my black phone, looked really good but after a while started turning blue from the dye in my jeans haha. So I bought another cheap TPU case from amazon, this time a clear but smokey black, looked really nice on the phone and didn't change colour.
The material I was thinking of was polycarbonate. I could only find a few that apparently use the material, and ended up buying an SGP case (on ebay here). I think its also available at www.sgpstore.com, because the box it came in had that link on it.
It's quite durable imo, nice and thin, doesn't take away from the sexiness of the sgs2. Overall it is one of the better cases I have bought.
Edit: it looks like it's just a cheap chinese rip-off of the sgp ultra-thin case. Found it cheaper here. Oh well, I'm happy to pay $5 extra if it comes in 2 days

I can't decide... (yep another case thread)

I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Personally I like the Leather style flip cases, The one that doubles up as a wallet.
http://www.ebay.co.uk/itm/BLACK-WAL..._MobilePhonesCasesPouches&hash=item3374db7913
I would never pay more than £10 (delivered) for a case.
in terms of slimness i've basically narrowed it down to two giants.
1. sgp ultra thin
2. casemate barely there.
not sure which ones better but from what i can tell they're pretty much the same, both at a hefty 25 bucks.
anyways, i'm in the same boat as you. XD
not sure which case to get.
vipfreak said:
I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Click to expand...
Click to collapse
I have the rearth and it is very slim, the only down side it is a beeeoootch to take off (i have a dock/charger for the phone) and if you take it on and off a lot it cracks and the part closet to the usb port cover, nothing earth shattering it actually makes it much easier to take the case off - that and the sgp ultra clear and it is almost like having nothing on the phone at all.
I have used diztronic cases for the last year (for my SII and now my N7000). They are very similar to the boxweave case you posted.
http://www.amazon.com/Diztronic-Fle...0386413&sr=8-3&keywords=diztronic+galaxy+note
As you know TPU protects like a silicon case but doesn't stick in your pocket or collect lint and dust due to it not being "sticky" feeling. I recently sold my SII for over $300 after 8 months of daily use because my SII was in perfect condition as a result of being in a diztronic tpu case. No, I never dropped the phone on cement or anything but I dropped my SII on the carpet from 5+ feet and the phone was unchanged when I picked it up. Didn't pop out of case or battery, etc. Because the tpu cases have a 1/8 or so "lip" on the front they also allow the phone to be placed face down on flat surfaces. IMHO and experience, a good tpu case is all you need to fully protect your phone unless you work in construction or somehow expect to drop it on cement.
So, my vote goes to the boxweave or diztronic cases. BTW I got 2 diztronics for $14 from amazon, the black matte and smoke matte. Great deal!
^I'm actually thinking of getting a real cheap TPU case like that I can mod. My ideal case is a TPU Bumper, maybe the Boxwave Black out without the back part but have the vol and power buttons cut out. I guess it's just not feasible so far... ?
Anyway, Thanks for the input so far guys, keep it coming.
bumper TPU from Amazon
I'm actually thinking of getting a real cheap TPU case like that I can mod. My ideal case is a TPU Bumper, maybe the Boxwave Black out without the back part but have the vol and power buttons cut out. I guess it's just not feasible so far... ?
first post here,
I have one of these.
search amazon for bumper cases.
I'm not allowed to post urls.
I like it, I have it on right now. What I have is different from what's
in the pictures. No cutouts for the buttons and the other cutouts are not
as big. The covers of the buttons are pretty sensitive, unlike the covers
for the Boxwave type which I got from Hongkong for 2 bucks.
Check amazon out, they have a lot of cases.
I also have the elago Breathe case, I love them I have two.
I ended up taking my chances on this. I guess it's going to be as close as I get. Thanks everyone, I'll let you know how it is when I get it.
vipfreak said:
I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Click to expand...
Click to collapse
I have the 3 of them
Go for the Rearth Ringke Slim , is THE BEST OF ALL !!!
Hi all, I'm in a similar dilemma.
I've got a choice between these two:
https://www.gearzap.com/media/catalog/product/3/4/34484-2.jpg
and
http://www.ebay.co.uk/itm/HYBRID-SI...lePhonesCasesPouches&var=&hash=item416682f7b6
I know I should pick the Zenus, but would the inside bit that holds my phone scratch the outer bezel? And since the hybrid one has a silicon case THEN a hard outer shell I figured it would be good too. Any ideas?
Thanks!
I use a an SGP Ultra thin. Comfortable case. Considering the size of the phone the case is great. Merges with the Phone. +1 anytime.
I ordered this one http://www.ebay.co.uk/itm/160732471512?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649. It has a stand that works in both axis.
good
Nice

Best TPU style case?

Looking for the thinnest and best fitting TPU style case. So far, I know of the Incipio NGP, Diztronic and Cruzerlite. What do you guys recommend?
clankfu said:
Looking for the thinnest and best fitting TPU style case. So far, I know of the Incipio NGP, Diztronic and Cruzerlite. What do you guys recommend?
Click to expand...
Click to collapse
I'm using the Diztronic matte blue one. Fits really well and looks great, much better than the cheapo one I picked up on ebay :silly:
Hasn't anyone used all 3 of the cases I listed above for their S3 and can compare? Wondering which one's the thinnest.
In have the diztronic matte black and it's great. Its not too thick and has a decent grip to it. Some have said the cruzerlite tpu cases have a ribed side for grip.
+1 For Diztronic matte black. Thin, light, good fit, easy to remove, no finger prints, slides easily in and out pockets, provides "adequate" protection of all 4 side edges given its thickness and a light lid-bumper around the front edges of the screen helps keep the screen from touching flat surfaces when the SGS3 is placed face-down. Btw... it also looks good.
I have all 3 and I must say the THINNEST hands down is none of the above. Samsung actually makes the thinnest TPU case and also while its the thinnest it has covered flaps for the 3.5mm headphone jack and the micro usb charging port! While I love my clear matte back Diztronic case the Samsung one has it beat in terms of sheer thinness. It also has the least amount of lip so it doesn't lift the edges of a Zagg or other full screen protector. Just my 2 cents.
Sent from my Samsung Galaxy S™ III
The Body Glove tpu case is actually really thin on my S3 and its 20 bucks on Smartphonepedia.com. I hope this helps
Sent from my SGH-T999 using xda app-developers app
Have you tried Samsung brand Protective Case blue TPU case? This thing feels amazing, nice grip and covers headphone port and microUSB. I have tried several different TPU cases and this one hands down feel the best for me. ExpansyUSA is selling them for $12.99
http://www.expansys-usa.com/info.aspx?i=232352
http://www.samsung.com/us/mobile/cell-phones-accessories/EFC-1G6WBEGSTA
Sent from my GT-I9300 using Tapatalk 2
I find it lame that people review cases and use the terms "thin" and "slim" in term reviews... These terms are totally useless to me as they can mean drastically different things to different people. When I do case reviews I try to include measurements whenever possible.
Example, post #4 of my Igadgitz TPU case review:
http://forum.xda-developers.com/showthread.php?t=1762539
I think if more an more people start doing this, everyone will be better off.
zen0s said:
Have you tried Samsung brand Protective Case blue TPU case? This thing feels amazing, nice grip and covers headphone port and microUSB. I have tried several different TPU cases and this one hands down feel the best for me. ExpansyUSA is selling them for $12.99
http://www.expansys-usa.com/info.aspx?i=232352
http://www.samsung.com/us/mobile/cell-phones-accessories/EFC-1G6WBEGSTA
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Is that the only color they have?
clankfu said:
Is that the only color they have?
Click to expand...
Click to collapse
I don't know about on Expansys but on MobileFun.com it comes in clear too.
Sent from my Samsung Galaxy S™ III
Ended up ordering the Cruzerlite matte clear one and it should be here tomorrow. I'll probably end up trying out the Incipio translucent mercury too. I hear a lot of good things about Diztronic but not a fan of their color choices.
clankfu said:
Ended up ordering the Cruzerlite matte clear one and it should be here tomorrow. I'll probably end up trying out the Incipio translucent mercury too. I hear a lot of good things about Diztronic but not a fan of their color choices.
Click to expand...
Click to collapse
When you get both, will you perhaps do a side by side review of them for us? I like to hear what other people think about our stuff and how it stacks up against other cases.
Thanks
ScottyBrown said:
When you get both, will you perhaps do a side by side review of them for us? I like to hear what other people think about our stuff and how it stacks up against other cases.
Thanks
Click to expand...
Click to collapse
Will do.
The Mercury Pearl is by far the best fitting and looking TPU for the SGS3.
IMHO, YMMV...
i have a diztronic and the cruizerlite case. i like the cruizerlite better but thats mainly because it has the cool design all over it. the diz is just a plain cae. the diz is thinner than the cruizer but the cruizer has the ribbed sides so it grips better. they both fit about the same. the ridge on the front that touched the screen is a little thicker on the cruizer. i'd recommend either to anyone!
http://www.ebay.com/itm/Genuine-Sam...Case-Galaxy-S3-SIII-i9300-White-/130737661345
not splashproof but very thin..
I really like my mercury translucent Incipio NGP case. Only downside is that the covered power button is a little harder to click.
really like my matte black ditztronic
I want to try a Diztronic case but I don't like the color choices for my white S3.

Looking for a quality soft silicon gel case

Does anyone know of any company's making a quality soft silicon gel case? I purchased the Diztronic TPU case but I didn't like it one bit. It fit fine but it is way to slick and hard feeling. I like the feeling of a softer silicon more. The only silicon cases I can find are the cheap $3 on Ebay.
Any recommendations are appreciated.
jrwingate6 said:
Does anyone know of any company's making a quality soft silicon gel case? I purchased the Diztronic TPU case but I didn't like it one bit. It fit fine but it is way to slick and hard feeling. I like the feeling of a softer silicon more. The only silicon cases I can find are the cheap $3 on Ebay.
Any recommendations are appreciated.
Click to expand...
Click to collapse
http://www.amazon.com/gp/product/B008CNHRIA/ref=oh_details_o02_s00_i00
i have this.. and love it. just the right balance between grip and not-sticky. (the tire tread is a nice addition.)
EFC-1G6JBECSTD
I probably should have added that I am looking for a smooth matte finish with no gloss or texture.
bought 4 different colors from this guy.
http://www.ebay.com/itm/110913278731?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
all are nice and thick. all ports line up nice, seem like they will protect from a mild drop.
not really sure what your asking for here. silicone cases are all pretty much the same only real difference is thickness.
s0me guy said:
bought 4 different colors from this guy.
http://www.ebay.com/itm/110913278731?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
all are nice and thick. all ports line up nice, seem like they will protect from a mild drop.
not really sure what your asking for here. silicone cases are all pretty much the same only real difference is thickness.
Click to expand...
Click to collapse
and price. get the cheap ones on ebay, if you want a simple silicone case... because that is all they are: a blob of silicone.
s0me guy said:
bought 4 different colors from this guy.
http://www.ebay.com/itm/110913278731?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
all are nice and thick. all ports line up nice, seem like they will protect from a mild drop.
not really sure what your asking for here. silicone cases are all pretty much the same only real difference is thickness.
Click to expand...
Click to collapse
okay cool. Thanks. Basically what I'm asking for is a quality made silicon case that isn't to loose or has poorly cut ports. I've had ****ty silicon cases before that I couldn't even use because they were so loose.
You know how Diztronic makes a quality TPU case? Basically looking for a company that makes a quality silicon case.
i hear ya.
yea these cases are legit. all 4 fit the phones just the same. nice & snug, all ports line up good and pretty thick. ill take a mirror pic her in a sec. (no other camera righ tnow)
i had to use a second mirror to get some angles. i think i opened 40 different dimensions when i did it lol.

Categories

Resources