Help me wave ii bloqued at samsung - Bada Software and Hacking General

bonsoir,
aprés flashage de mon wave2 il veut plus s'allumé il reste bloqué surla page samsung et ne s'eteint plus. et j'arrive plus a le reflashé.
after flashing wave II , blocked on the samsung page. And do not want any more flashe. he never finish his flash.

mouhmou1 said:
bonsoir,
aprés flashage de mon wave2 il veut plus s'allumé il reste bloqué surla page samsung et ne s'eteint plus. et j'arrive plus a le reflashé.
after flashing wave II , blocked on the samsung page. And do not want any more flashe. he never finish his flash.
Click to expand...
Click to collapse
I guess you flashed a 2.0 firmware. Try to flash a 1.2 fw as a full download then try the 2.0 again...

anghelyi said:
I guess you flashed a 2.0 firmware. Try to flash a 1.2 fw as a full download then try the 2.0 again...
Click to expand...
Click to collapse
hello
I her fell in love with 1.2 official but always similar. He finished not his flash
tanks

mouhmou1 said:
hello
I her fell in love with 1.2 official but always similar. He finished not his flash
tanks
Click to expand...
Click to collapse
I have no other idea...

Ensure that you don't forgot a step , that you have the lastest drivers for your PC and the last version of the flashing software.
Then try again and again... I don't see an other solution.
Maybe you are just unlucky but what you said doesn't sound good...

Related

[Q] Help needed to flash my diamond

Hi everyone, here is my problem. I have a diamond, and a few days ago i installed a custom rom called BsB. I'm happy with it but i wish to reinstall an official rom, direct from HTC. Everytime i try to install a rom, i have an error message, and the proccess fails. What can I do? And i wish to know which is the more recent official rom and where to download it? Thank you very much for any help, and long live this forum.
have you read the Mtty thread ? i think it will help you
tu dois effectuer un speciale formatage ( down vol- + ok la bouton ronde au milieu + reset ) et u reconmence l'instalation de neuveau de la room

[Q] [help]F240L to E986

Hi all,
I just received my LG Optimus G Pro from Singapore...
All is working but not 4G LTE...my phone is not recognize as complient to my network (France) even if it work on 2600MHz Frequency...
So i'd like to put an E986 .kzd file to be able to turn on my provider's 4G...
I have tried the R&d method, but I got "extract error" every time....even by re downloading .kdz...
I have tried by modifying "host" file too....
So, my question :
Is there a way to put in an E986 stock rom ?....or something else working in France on 2600MHz network
My phone is root and I got this informations about it :
LG-F240L
Android 4.4.2
Bande de base (band base) : M9615A-CEFWMAZM-2.0.1628
Noyau (kernel) : 3.4.0
Build : KOT49I.F240L20d
Logiciel (software) : F240L20d
Recovery : Android system recovery <3e>
KOT49I.F240L20d test-keys
Thank you for help
Hi all...
I have finally put E986 stock rom...I had forgotten to able USB Debug....
But now, I have a problem : no network !
So I'm looking for a solution for this issue...if someone coule help me....
TY
Could someone send baseband E986 and/or F240L for France plz...?
hi (salut)
moi aussi j ai un lg coreen et j aimerai faire comme toi car j ai le meme probleme pour la 4g.
t chez free ?
I think there is no solution for you. You have to buy the europe version.
There are 2 solutions for no network: 1. You flash back with kdz of f240l or 2. You install cwm on it and flash the baseband
Sent from my LG-E986 using xda app-developers app
tomi001 said:
I think there is no solution for you. You have to buy the europe version.
There are 2 solutions for no network: 1. You flash back with kdz of f240l or 2. You install cwm on it and flash the baseband
Sent from my LG-E986 using xda app-developers app
Click to expand...
Click to collapse
Hi,
Thank you for answer...
I'm looking for .kdz on android 4.1 to be able to s-off the phone to exctract modem.img...I am in 4.4 and I can't flash it without havin recovery....
Do you know where can I find an old .kdz for F240L phone ? Or modem.img for E986 LG phone ?
Ty
sambeck said:
hi (salut)
moi aussi j ai un lg coreen et j aimerai faire comme toi car j ai le meme probleme pour la 4g.
t chez free ?
Click to expand...
Click to collapse
Oui, chez Free....il est pas reconnu donc impossible d'activer la 4G....
Il faut root le phone mais surtout le rendre s-off....ce que j'ai réussi a faire en mettant la version francaise...mais plus de réseau...pour récupérer le fichier pour le réseau, il faut le prendre dans la version coréenne mais uniquement celle débloquée...
feuillearouler said:
Hi,
Thank you for answer...
I'm looking for .kdz on android 4.1 to be able to s-off the phone to exctract modem.img...I am in 4.4 and I can't flash it without havin recovery....
Do you know where can I find an old .kdz for F240L phone ? Or modem.img for E986 LG phone ?
Ty
Oui, chez Free....il est pas reconnu donc impossible d'activer la 4G....
Il faut root le phone mais surtout le rendre s-off....ce que j'ai réussi a faire en mettant la version francaise...mais plus de réseau...pour récupérer le fichier pour le réseau, il faut le prendre dans la version coréenne mais uniquement celle débloquée...
Click to expand...
Click to collapse
Here the kdz android 4.1.2 for f240l:
http://forum.xda-developers.com/showthread.php?t=2438088
Sent from my LG-E986 using xda app-developers app
I have tried your link....and my IMEI disappeared....my phone is not more recognize even by R&D tools....
I can't upgrade in normal mode...I test in download mode....hope my IMEI come back...
By the way if someone know how to put in IMEI or get an modem.zip from F240L....
Pfiou.....I was really affraid to have lost my phone....
But after reboot with last stock .kdz all is came back....
I'll wait for a s-off for android 4.4.2...as we can root but not install recovery....
Finally....
I have finally root, s-off and ROM my 4.4.2...
Simply downgrade to 4.1.2 with "LGT/LG U+(KOREA) V10Z LGF240L" you can find here : http://lg-phone-firmware.com/index.php?id_mod=25
Second, I root my phone with this method : http://forum.xda-developers.com/showthread.php?t=2362657&postcount=1
Third : s-off with Freegee (find it on play store)
Finally install CM11...
Finally root 4.4.2
This tread explain how to....
http://forum.xda-developers.com/showthread.php?t=2699067
I tried GomdoLight ( http://www.startpda.kr/zbxe/index.php?document_srl=3447999&listStyle=viewer&mid=pds_rom ) but it seems unable to work with 4.4.2...
So I'm looking for something to delete ALL korean app...and unused app
Ty

[Q] Galaxy Tab 3 10.1 P5210 No active WiFi

Friends I have a problem when I try to activate the Wifi, it does not. button returns. I have proven to Hard Reset, I updated Rom Official Kit Kat through android., Check if you have connected all internal connectors and nothing .... I can not find any help on Google ... no one has that problem ... It will be problem Factory ???? HELP
Lo siento, pero necesitas hablar ingles.
Sent from my ATRIX HD using XDA Free mobile app
bmatney is totally right forums rules dictate you need to use English.
@lacosoft you need to read forum rules. Stop been lazy, Use Google many claims it is your friend. Use this page=>]h__ps://translate.google.com/?hl=en&tab=TT
Here is the proper way. Use Google to translate and copy the English translation here. There is always the need to manually correct some words. Then if you feel you need write the Spanish version separately. I will suggest use quotation but not necessary.
Here is my English to Spanish translation, yes Google is not perfect but give you an Idea.
bmatney es reglas foros totalmente correctas dictan necesita usar Inglés.
lacosoft te recomiendo que leas las reglas del foro. Detener sido perezoso, Usar Google muchas reclamaciones que es tu amigo. Utilice esta página => h__ps://translate.google.com/?hl=en&tab=TT
Aquí está la manera adecuada. Utilice Google para traducir y copiar la traducción en Inglés aquí. Siempre existe la necesidad de corregir manualmente algunas palabras. Entonces, si usted siente que necesita escribir la versión en español por separado. Voy a sugerir el uso de presupuesto, pero no es necesario.
Click to expand...
Click to collapse
So do not be lacy when you get back translate the info and the Title.
================================================================================================
Here is your original Spanish Question translated with Googles
Title: Galaxy Tab3 10.1 P5210 Wifi would not turn on
Friends I have a problem when I try to activate the Wifi, it does not. button returns. I've done hard reset, Ya official Rom update Kit Kat through android., And verfique if you have internal connectors all connected and nothing .... I can not find any help on Google ... no one has that problem ... It will be problem Factory ???? HELP !!!!!
And yes RED are the mistake made by google but still understandably.
My Answer
This problem is showing up to many that has change to KK 4.4.2 using cellphone models TAB 3 7" and 8". It usually happens to them when they go back to 4.4.2. It is the first time I see some one with a P5210.
This is my personal opinion: "I believe KK-4.4.2 is worthless piece of garbage, that only create issues. And watch out it will get worst with new Future Android releases due to Google's intention in perform a Total SELinix Enforce."
What I will do if I am you?
I will download my exact P210 Stock Rom from Samsung or Sammobile , And Odin back to factory. Yes the one that the device came with. You should had written the info in some place. The fact is that most 4,2,2 P5210 Stock Rom should work. But since you have a BIG issue with wifi I will stick to my Original!
Now stop been lacy and use google to translate my English response.
PD. When I call you "lacy" is in a lovely manners, "cariñosamente""
Thanks for the respuesta.Yo and did the downgrade to 4.2.2. and still not responding. I did it through Odin, and nothing. Not if all 4.2.2 roms from different countries will be the same. But thanks for taking the time to answer.

Ascend P6 - Searching for the Best 2016 Custom ROM

Hello there,
i will update my old Ascend P6 from the original Stock ROM (B520 Original) to the latest best and "Security Fixed" Custom ROM.
The very bad is that Huawei doesn't support the P6 anymore and this is a big Shame! And thus the B520 Version has so many Security Issues!
Just 8 from 10 Security Issues are opened on this Android 4.4.2 Version. Because of this i just banned all Onlinebanking etc. Tools from the Phone
because with this Security Fails it's just an ordinary Operating System aka Winblows -.-
I read so many threads but what Version is the most accurate Custom ROM, fixed with all Security Issues ? I just don't need Android 5 because
this is a Fake for the Ascend P6 but i need a Version that is 95% Secure and stable.
Here are so many Threads about Custom ROMs but the most are still outdated (2014).
Please help me. Thanks
Right, I looked for a lot of ROM's to my Huawei P6 too.. I got a B709 Now and I think he is faster but ... just... but... the battery faster discharge than in B520 rom.... But B520 is slower than B709 (
Hi,
i know that Chinese Market ROM but there must be a good and actual Custom ROM something around with all that Bug and Security Fixes.
The P6 is slow with the B520 Firmware but the Cam and the IPS Display are good in my Eyes. What is with surdu_petru and so on ?
But i learned the Lession: I will never buy Huawei Phones. It is a big *shame* that a Quad Core and 2 GB RAM will be obsolete. I know that
the CPU is a Custom Prozessor from Huawei and the Kernel Coding is a Pain in the a** i noticed but someone must do a better Job with
a Custom ROM.
I wouln'd kick this Quad Core Phone with 2 GB RAM in the Trash because the Software is outdated.
Just got Samsung Galaxy J5 and gave my P6 to my wife.
Still think it is the awesome phone, but no new roms at all.
Maybe I should roll back to B520, if it is the most stable for P6.
Now I'm on B709 and noticed some weak mobile network signal.
Très bon pour la batterie
Bonjour vous tous et toutes,
J'ai installé celui-ci -> hwp6-U06-4.4.2-LightningKat_RC02, et la batterie est très endurante
Pol
Pol Lekhmer said:
Bonjour vous tous et toutes, J'ai installé celui-ci -> hwp6-U06-4.4.2-LightningKat_RC02, et la batterie est très endurante
Pol
Click to expand...
Click to collapse
Bonjour Pol, est-il celui-ci? [ROM][KK][P6-U06]LightningKat V1.03 12-05-14 Test version
GaT7 said:
Bonjour Pol, est-il celui-ci? [ROM][KK][P6-U06]LightningKat V1.03 12-05-14 Test version
Click to expand...
Click to collapse
Bonjour,
Non, ce n'est pas celui-là, c'est ici : Download LightningKat zip et télécharger celui en bas : https://mega.nz/#F!2ANigLaB!JeVVwVjf_ksRONmM4_VQag
hwp6-U06-4.4.2-LightingKat_RC02.zip
So the ascend p6 is dead at Developers here?
This Phone has 2gb of ram and a Quad Core.......
Is hydra rom good
Sent from my P6-U06 using XDA-Developers Legacy app
This one her is working ok for mee. https://www.androidfilehost.com/?fid=95887005526786242
trikker77 said:
This one here is working ok for me. https://www.androidfilehost.com/?fid=95887005526786242
Click to expand...
Click to collapse
It's excellent no doubt, but finding I cannot easily improve battery life because it doesn't seem to include an 'Ultra battery' or similar setting, like the official rom & customised roms based on the official have - please see enclosed pic.
B520 lollipop is official - Banking apps will work.
B126/B130 kitkat are the most stable and secure.

D852 Fido

Hello,
I have D852 from Fido (Quebec) that I really like and want to keep.
Until recently, it had stock MM and everything was fine.
I downgraded to LP 5.0.1 Telus that I downloaded from storagecow.eu (file name is TELUS D85220F_00.kdz) and managed to get it rooted.
I then tried to install TWRP and for whatever reason, it doesn't work.
I used ADB, AutoRec, Flashify, TWRP Official App, nothing works.
They all show that the installation is successful but when I try to boot to recovery (Quickboot, ADB, Power&Vol-), all I get is red/blue led flashes then I press Volume Down and the phone boots normally.
I really want to get TWRP on it so I can flash the latest Oreo on it.
Thank you in advance
flash with BELL D85220xx.kdz
root
install twrp AutoRec
Funjet said:
flash with BELL D85220xx.kdz
root
install twrp AutoRec
Click to expand...
Click to collapse
Hi Funjet,
Can you please point me to the download location of the correct files?
Thank you,
https://lg-firmwares.com/download-file/?fileId=6425
autorec twrp
https://mega.nz/#F!rtI1naZT!LJIKUVpv8fYjrvhpykA4_A!2o433RBZ
Funjet said:
https://lg-firmwares.com/download-file/?fileId=6425
autorec twrp
https://mega.nz/#F!rtI1naZT!LJIKUVpv8fYjrvhpykA4_A!2o433RBZ
Click to expand...
Click to collapse
Thank you Funjet, I'll try it later on today and report the results back.
I hope it'll work because in one of the many videos I watched, I saw someone using Kingroot 4.5.6 on MM.
Funjet said:
https://lg-firmwares.com/download-file/?fileId=6425
autorec twrp
https://mega.nz/#F!rtI1naZT!LJIKUVpv8fYjrvhpykA4_A!2o433RBZ
Click to expand...
Click to collapse
Hi Funjet,
I can't seem to be able to flash Bell_D85220k (currently have Telus_D85220f) or any other KDZ onto my phone.
I'm using the same LGUP that I used to downgrade from MM to LP, on the same computer, same USB cable and USB port and I keep getting an error after 9%.
The error message says "Error : [18: 3:35] Port Open is failed after DLOAD change."
I'm using LGUP 1.14 and the DLL Version is 0.3.19.15. Any idea what's wrong and how to fix it?
I would have included an image but don't see how to attach a file to a thread.
Thank you,
Try my LGUP...
peut-etre que !
Funjet said:
Try my LGUP...
peut-etre que !
Click to expand...
Click to collapse
Downloaded it! Thank you.
Tried it and it says Model - Unknown, COM Ports - [COM4, D85220f], which is the Telus KDZ I applied on it.
When I click Select, it says You have to select a known model, please.
What's missing, the right DLL?
Where are you at? Montreal? I am in Montreal.
Is there a way to communicate with you directly?
Thank you,
1- did you Enable USB debugging?
2- check usb driver
ps// i'm from Quebec and i speek french!
Funjet said:
1- did you Enable USB debugging?
2- check usb driver
ps// i'm from Quebec and i speek french!
Click to expand...
Click to collapse
Le débogage USB est activé et j'utilise le pilote LG Mobile.
Peut-être que je dois changer le pilote USB? Mais à quelle version?
Je vous remercie,
lb357 said:
Le débogage USB est activé et j'utilise le pilote LG Mobile.
Peut-être que je dois changer le pilote USB? Mais à quelle version?
Je vous remercie,
Click to expand...
Click to collapse
C'est ceci que j'utilise,
si ca ne fonctionne pas, le probleme est ailleurs!
Funjet said:
C'est ceci que j'utilise,
si ca ne fonctionne pas, le probleme est ailleurs!
Click to expand...
Click to collapse
Bonjour Funjet,
Merci pour le fichier.
J'ai essayé d'exécuter InstallUSB.exe et InstallUSB64.exe mais ils ne font rien sur mon ordinateur de Windows 10.
Est-ce une application portable ou doit-elle être installée? Si installé, comment?
Je vous remercie,
Funjet said:
1- did you Enable USB debugging?
2- check usb driver
ps// i'm from Quebec and i speek french!
Click to expand...
Click to collapse
Hello Funjet, I'm sorry, I have to post this one in English...
I think I finally figured out what I did! I extracted the laf.img file in order to get TWRP installed and since TWRP never installed, I now can't get into download mode.
The strange thing is that I have two laf.img files, one on my internal storage and one on my SDcard. The one in my internal storage is 16.5MB and the one on the SDcard is 32MB.
How do I know which one to install? Is there any difference at all? Could there be problems if I install the wrong one?
Thank you,

Categories

Resources