The device acts as if it is being charged.
Steps I have taken so far:
-uninstalled T-mo Samsung mobile drivers and reinstalled
-deleted (uninstalled) ALL recognized USB devices via USB deview
-tried to connect without Samsung drivers installed and all USB devices uninstalled
-tried to connect with Samsung drivers installed and all USB devices uninstalled
-tried to connect without Samsung drivers and other devices installed
-tried to connect using safe mode, both with drivers installed and not
---**these are both trying with the current one provided on Samsung's site (1.5.14.0) and with the one found here on XDA from 25apr2013 (1.5.23.0)
-tried to connect using different USB ports
-tried to connect using a different USB port on a different USB controller altogether
The kicker:
Device is recognized instantly... on my laptop.
This means:
-It is not the USB cable I am using (even though I have tried 3 different cables altogether regardless, including the one that came with the phone)
-It is not the device itself
Possible: Windows issue? Last time this happened was long ago when I had gotten a MyTouch 3G Slide. I eventually just reinstalled Windows since I had been meaning to then. I don't want to do it now though because I have too many things installed on here to start a fresh install... but I suppose if nothing else works, that's what I'll have to do.
Before that though, I would love to hear any other suggestions from anyone here.
Some time the fault cud be the cable itself... I had same issue months ago my original samsung UsB cables didn't worked... It olwyz show the msg UsB not recognized... Then I tried with a different UsB cable (i had a Nokia UsB cable) and it worked...
Try it...
Cheers!!!
Sent from battery killer Jellybean GT-I9100 :-\
rjsmer said:
Some time the fault cud be the cable itself... I had same issue months ago my original samsung UsB cables didn't worked... It olwyz show the msg UsB not recognized... Then I tried with a different UsB cable (i had a Nokia UsB cable) and it worked...
Try it...
Cheers!!!
Sent from battery killer Jellybean GT-I9100 :-\
Click to expand...
Click to collapse
As stated, I have tried to use two other USB cables aside from just the one that came in the package.
Since all cables work on the laptop, but not this computer, I have pretty much singled it out to be a windows or a driver issue. :\
What are the specs of your desktop and the specs of your laptop? You claim it is a windows issue so I assume your laptop (that recognizes the phone) is not windows? Do you have Kies on the PC? If so, try to uninstall it completely and then install the individual drivers. Also, maybe just try updating Kies. You wouldn't need to install it, just download to your PC should work. As far as that goes, does Kies recognize the phone when plugged in at all? Does ODIN recognize the phone when plugged in? Maybe some of this will help you to find out if it is a driver issue or not. Good luck.
scott14719 said:
What are the specs of your desktop and the specs of your laptop? You claim it is a windows issue so I assume your laptop (that recognizes the phone) is not windows? Do you have Kies on the PC? If so, try to uninstall it completely and then install the individual drivers. Also, maybe just try updating Kies. You wouldn't need to install it, just download to your PC should work. As far as that goes, does Kies recognize the phone when plugged in at all? Does ODIN recognize the phone when plugged in? Maybe some of this will help you to find out if it is a driver issue or not. Good luck.
Click to expand...
Click to collapse
PC is i7 920, 12GB DDR3, Intel x58
Laptop is i5 2430M, 6GB DDR3, Sandy Bridge
Both are Win7 Pro, neither have Kies (I always just downloaded the drivers themselves) but I'm downloading it now to give it a try. As of now, nothing recognizes the phone on PC.
Kies method didn't work either
I did "Troubleshoot connection error", which I guess reinstalled the driver, but it still didn't work.
Getting ready to dig out that Win7 Pro CD at this point... :\
Shuurei said:
Kies method didn't work either
I did "Troubleshoot connection error", which I guess reinstalled the driver, but it still didn't work.
Getting ready to dig out that Win7 Pro CD at this point... :\
Click to expand...
Click to collapse
Samsung Kies isn't yet compatible with the sgh-m919. Samsung rep told me soon last night
Have you unlocked developer options yet and checked usb debugging? That might be your problem....
SBERG117 said:
Have you unlocked developer options yet and checked usb debugging? That might be your problem....
Click to expand...
Click to collapse
Enabling dev options and USB debugging was the first thing I did once I turned on the phone. Tried it both with and without, still not recognized either way. Still recognized on laptop.
I've also reinstalled windows altogether, since that fixed my issue last time around, but it's no good this time still. Clean install, formatted. No good. Previous steps from first post also taken, still no good. Tried the PDAnet method as well, no good.
At this point I am wondering if it might be an x58 issue, which would really suck, but it's the only thing I can think of given all the steps I have taken.
Okay... so what's the trick on getting Windows 7 x64 to recognize this device in Download Mode?
I have enabled USB Debugging. Tried several different ports on my Maximus V Extreme motherboard. I have tried using the PDANet drivers. Nothing works.Windows will prompt me with the "Device Driver software was not successfully installed" message. Anyone know a trick?
EDIT: FIGURED IT OUT. The last Android device I owned was the Galaxy S2. Now, back then it was understood that one should avoid Kies like the plague. However, in this case, it solved my problem. It installed all necessary drivers and I was able to communicate with ODIN. Cheers.
x58 issue
luckyduck69 said:
Okay... so what's the trick on getting Windows 7 x64 to recognize this device in Download Mode?
I have enabled USB Debugging. Tried several different ports on my Maximus V Extreme motherboard. I have tried using the PDANet drivers. Nothing works.Windows will prompt me with the "Device Driver software was not successfully installed" message. Anyone know a trick?
EDIT: FIGURED IT OUT. The last Android device I owned was the Galaxy S2. Now, back then it was understood that one should avoid Kies like the plague. However, in this case, it solved my problem. It installed all necessary drivers and I was able to communicate with ODIN. Cheers.
Click to expand...
Click to collapse
I might have pinpointed the issue!
I tried Kies again, uninstalled, reinstalled, updated. No go. I did Kies by air and got a connection! So It's gotta be something with the USB.
Although I thought it was weird, I think it might be an x58 issue, I decided to pursue that anyways.
I found out that USB issues are common with x58 (per this forum: http://www.evga.com/forums/tm.aspx?m=159610 ) and will be trying a fix located here: http://www.evga.com/forums/tm.aspx?m=442244&mpage=1
I'll report back once I try this out. Hopefully it fixes it.
If not, I just ordered another USB 3.0 controller (completely unrelated, it doesn't need to be USB 3.0, just a different controller altogether, but USB 3.0 is backwards compatible anyways. I just needed one for blackmagic) which was PCI-e x1 (still dependent on x58, so it wouldn't have mattered, check diagram on fix link), which I WAS going to install in my PCI-e x1 slot, but that would have not worked! Going to install in a PCI-e x16 and hope for the best.
I'll reply back once I test that out too.
Confirmed x58 and S4/general USB connectivity issues
Shuurei said:
I might have pinpointed the issue!
I tried Kies again, uninstalled, reinstalled, updated. No go. I did Kies by air and got a connection! So It's gotta be something with the USB.
Although I thought it was weird, I think it might be an x58 issue, I decided to pursue that anyways.
I found out that USB issues are common with x58 (per this forum: http://www.evga.com/forums/tm.aspx?m=159610 ) and will be trying a fix located here: http://www.evga.com/forums/tm.aspx?m=442244&mpage=1
I'll report back once I try this out. Hopefully it fixes it.
If not, I just ordered another USB 3.0 controller (completely unrelated, it doesn't need to be USB 3.0, just a different controller altogether, but USB 3.0 is backwards compatible anyways. I just needed one for blackmagic) which was PCI-e x1 (still dependent on x58, so it wouldn't have mattered, check diagram on fix link), which I WAS going to install in my PCI-e x1 slot, but that would have not worked! Going to install in a PCI-e x16 and hope for the best.
I'll reply back once I test that out too.
Click to expand...
Click to collapse
In case anyone was wondering or stumbles upon this later, I have a few updates.
I got the USB controller today and plugged it into the PCI-e x16 slot, plugged in the S4 and it worked completely fine.
I also contacted EVGA about the issue and will get an RMA, so perhaps it's just a faulty unit. However, this seems rather common (refer to previous linked threads) in x58 chips.
I imagine it has something to do with power distribution with the controller, which is why upping the ICH voltage fixes it for some people. The USB controller is powered via 4pin, not dependent on Southbridge. I guess the S4 has higher voltage(?) requirements for it to be recognized. It seems rather strange since my other devices are still recognized, but well, that's what I managed to come up with.
Cheers.
Shuurei said:
In case anyone was wondering or stumbles upon this later, I have a few updates.
I got the USB controller today and plugged it into the PCI-e x16 slot, plugged in the S4 and it worked completely fine.
I also contacted EVGA about the issue and will get an RMA, so perhaps it's just a faulty unit. However, this seems rather common (refer to previous linked threads) in x58 chips.
I imagine it has something to do with power distribution with the controller, which is why upping the ICH voltage fixes it for some people. The USB controller is powered via 4pin, not dependent on Southbridge. I guess the S4 has higher voltage(?) requirements for it to be recognized. It seems rather strange since my other devices are still recognized, but well, that's what I managed to come up with.
Cheers.
Click to expand...
Click to collapse
Here's my craziness.
USB connection was working yesterday. Today, it is not.
I have uninstalled/reinstalled the Samsung Windows drivers/Kies
I have even adjusted my southbridge voltage to 1.2V in my BIOS
Still, no joy.
Curiously, when I boot the phone into download/ODIN mode and connect it, ODIN recognizes the connection. Reboot back into normal mode, and no USB connection is recognized. It is not showing up in my Device Manager as an unrecognized device. It just doesn't know it is there (unless phone is in download mode).
UPDATE: Solved. I had installed this ROM (http://forum.xda-developers.com/showthread.php?t=2261013). Reading back over the thread, it provided instructions for re-enabling the USB recognition of the phone. Had to re-enable the developer options and reset USB debugging. Makes sense now.
HI
I'm facing this issue today, I've tried two different laptops, both have Windows 7 x64 installed. I've tried every USB port on the two machines, I've tried with three different cables, I've downloaded and installed every USB driver there is. no use!
I'm out of options here and I can't think where to look further.
any help please?
shuurei said:
the device acts as if it is being charged.
Steps i have taken so far:
-uninstalled t-mo samsung mobile drivers and reinstalled
-deleted (uninstalled) all recognized usb devices via usb deview
-tried to connect without samsung drivers installed and all usb devices uninstalled
-tried to connect with samsung drivers installed and all usb devices uninstalled
-tried to connect without samsung drivers and other devices installed
-tried to connect using safe mode, both with drivers installed and not
---**these are both trying with the current one provided on samsung's site (1.5.14.0) and with the one found here on xda from 25apr2013 (1.5.23.0)
-tried to connect using different usb ports
-tried to connect using a different usb port on a different usb controller altogether
the kicker:
Device is recognized instantly... On my laptop.
This means:
-it is not the usb cable i am using (even though i have tried 3 different cables altogether regardless, including the one that came with the phone)
-it is not the device itself
possible: Windows issue? Last time this happened was long ago when i had gotten a mytouch 3g slide. I eventually just reinstalled windows since i had been meaning to then. I don't want to do it now though because i have too many things installed on here to start a fresh install... But i suppose if nothing else works, that's what i'll have to do.
Before that though, i would love to hear any other suggestions from anyone here.
Click to expand...
Click to collapse
很想帮你啊 可是英文水平比较拙计
ok so now I'm guessing it is not windows, I tried on another machine with Windows Vista and got the same error.
any thoughts, anyone?
Did a factory reset for the phone
no it works!
don't know why
I just picked up this phone a couple days ago and last night tried to get the USB to work with no luck. I've tried everything I can think of. It does work in PTP mode but not MTP mode. I was able to use odin to on it though, so I was able to root it.
I've tried both in linux and on windows xp. I've never had an issue with any phone on linux and have installed/removed drivers numerous times on XP.
Tried 3 different cables, Factory reset with and without USB installed, tried pretty much everything I could find while googling similar problems (removing old registry entries, installed media player, etc)
I have adb installed on my linux box and even with debugging enabled I can't even get adb to connect to the phone.
Definitely something strange going on. Maybe I'll switch to cm10.1 to see if that makes a difference
I cant get my computer (windows 7) to connect with the phone when the phone is on, and was hoping some one might have found a fix.
This might fix it...
Shuurei said:
The device acts as if it is being charged.
Steps I have taken so far:
-uninstalled T-mo Samsung mobile drivers and reinstalled
-deleted (uninstalled) ALL recognized USB devices via USB deview
-tried to connect without Samsung drivers installed and all USB devices uninstalled
-tried to connect with Samsung drivers installed and all USB devices uninstalled
-tried to connect without Samsung drivers and other devices installed
-tried to connect using safe mode, both with drivers installed and not
---**these are both trying with the current one provided on Samsung's site (1.5.14.0) and with the one found here on XDA from 25apr2013 (1.5.23.0)
-tried to connect using different USB ports
-tried to connect using a different USB port on a different USB controller altogether
The kicker:
Device is recognized instantly... on my laptop.
This means:
-It is not the USB cable I am using (even though I have tried 3 different cables altogether regardless, including the one that came with the phone)
-It is not the device itself
Possible: Windows issue? Last time this happened was long ago when I had gotten a MyTouch 3G Slide. I eventually just reinstalled Windows since I had been meaning to then. I don't want to do it now though because I have too many things installed on here to start a fresh install... but I suppose if nothing else works, that's what I'll have to do.
Before that though, I would love to hear any other suggestions from anyone here.
Click to expand...
Click to collapse
Here's a link with a list of things to try what you may not have tried to fix your problems.
A small number of devices I have worked on have a weird thing, that the first time I plug the cable into the computer, it connects but won't show up on the screen. unplugging the USB cable from the machine for maybe 3 seconds, and reinserting makes the connection work... go figure! :>)
Aloha and Good Luck!
http://forum.xda-developers.com/showthread.php?p=32906335#post32906335
Been trying to root my phone so I can move to a custom ROM, and when installing the latest version of HTC Sync on my computer the installer returned the error that the HTC Drivers weren't installed. HTC Sync installed anyway, but, of course, it was no good to me on its own without the drivers. I then found an installer for just the drivers on their own, but that returned the "error applying transforms" message and failed to install.
I googled for solutions to this and tried to follow some which suggested editing the registry, but none of them worked. So as a last ditch attempt, I tried the old HTC Sync installer on my phone's SD card, which surprisingly worked without a hitch, installing both the drivers and Sync just fine!
My question is: is it safe to try to root and reflash my phone using the older version of Sync and the drivers? And, if not, does anyone have a solution to the problem of the latest drivers failing to install under Windows 7?
As a side-question, the wiki mentions that you have to use the original USB cable that came with the phone for this process, but I lost it long ago. Using the cable that came with my Pre 3. Does it reeaaaaally matter?
Older drivers are fine, the phone is not the newest anyway.
Send me the installer you tried to use and I will test.
Usb to Micro USB cable is USB to micro usb cable. Does not matter. I have used cables with Samsung, Motorola, HTC label and it did not make any difference whatsoever.
There are vendor special cables, but those are usually for debug / deployment / repair. But the usb chargers are all the same.
Hey thanks for the reply, the installer I tried was the latest one on HTC's support site. It seems a lot of people are having problems installing it so I'm not too concerned. I'm also pretty sure the older drivers will be fine, after all they were probably the latest when the flashing guide on the wiki was written!
Illidan Pornrage said:
Usb to Micro USB cable is USB to micro usb cable. Does not matter. I have used cables with Samsung, Motorola, HTC label and it did not make any difference whatsoever.
There are vendor special cables, but those are usually for debug / deployment / repair. But the usb chargers are all the same.
Click to expand...
Click to collapse
Yeah, thought it would be ok, and was pretty surprised that this guide said it had to be the vendor-specific cable. Just thought I'd check just in case though. Thanks!
So my phone was mounting fine on my pc, and then all of a sudden it wasn't. My Nexus 7 still mounts properly and accepts developer commands, but the m8 won't (yes developer settings is on).
I tried wiping and flashing a rom clean and it still doesn't work, charges fine though. Any advice?
Subscribed
I'm having the same issue. Stock non rooted and it will not connect. I have tried it on other computers cables ports everything.
Art2Fly said:
So my phone was mounting fine on my pc, and then all of a sudden it wasn't. My Nexus 7 still mounts properly and accepts developer commands, but the m8 won't (yes developer settings is on).
I tried wiping and flashing a rom clean and it still doesn't work, charges fine though. Any advice?
Click to expand...
Click to collapse
You might try a different cord.
Open Device Manager in Windows and then plug the phone in. Do you see it in the list with a little yellow triangle? Do you see Android USB Devices listed?
OP after literally messing with various driver files, 8 usb ports and 2 laptops, I dug out my old box of cables and found a taped up, on its last limb OEM HTC EVO 4g (not lte the original) cable. This thing has been through the ringer. But its exactly what It needed. I figured with the 3 cable I had already tried this wasn't the issue, but have you tried using an OEM cable? I guess that is all that works. Good Luck
beamer1341 said:
OP after literally messing with various driver files, 8 usb ports and 2 laptops, I dug out my old box of cables and found a taped up, on its last limb OEM HTC EVO 4g (not lte the original) cable. This thing has been through the ringer. But its exactly what It needed. I figured with the 3 cable I had already tried this wasn't the issue, but have you tried using an OEM cable? I guess that is all that works. Good Luck
Click to expand...
Click to collapse
Still trying to get it to work, have tried 4 cables myself. I might just end up having to return the phone.... Fastboot works in bootloader
Art2Fly said:
Still trying to get it to work, have tried 4 cables myself. I might just end up having to return the phone.... Fastboot works in bootloader
Click to expand...
Click to collapse
Uninstall all HTC drivers and HTC Sync. Then connect the phone. DO NOT choose the option to automatically install any drivers.
Open Device Manager, find the phone. Select the option to manually pick the driver, and select the generic MTP device driver.
This is what worked for me, after countless attempts at re-installing various HTC drivers, different cables and ports, etc.
Bump. Still looking for answer to this. I have RUU'ed both to Sense and Google Phone editions and the problem still persists, the phone does not detect its connected to a computer and change to mtp accordingly. Only way I was able to get the RUU in there was through fastboot, which is again the only time I can access the phone through usb. Adb is no luck in either android or recovery.
Art2Fly said:
Bump. Still looking for answer to this. I have RUU'ed both to Sense and Google Phone editions and the problem still persists, the phone does not detect its connected to a computer and change to mtp accordingly. Only way I was able to get the RUU in there was through fastboot, which is again the only time I can access the phone through usb. Adb is no luck in either android or recovery.
Click to expand...
Click to collapse
Have you tried revoking the USB debugging authorization and then accepting the RSA fingerprint key again when connecting to PC?
Obviously it can't be an USB cable problem if you can connect to it in bootloader mode and use fastboot commands.
To clarify, the phone just charges when connected, it does not detect that it is connected to PC so debugging doesn't even trigger, neither does mtp. I don't even get the slow charging notification
Does it do the same when you plug it in and reboot the computer to "pick up" during boot up process? Or if you run a live CD? I never had an issue like that with my phone but I did have a similar problem with the USB external blu ray drive I bought some time ago. The pc just didn't detect it at all not on any of the ports until I rebooted my PC with the drive already plugged it and for some reason it picked it up. <Not a solution as I don't know what caused it to not be detected in the first place but still...
Not sure if it's an issue with the device(Phone for you, blu ray drive for me) or if it's a problem with the PC even though other things might still work for you as it definitely did for me(phone, headset, mouse, keyboard, usb extender + all the external hard-drives connected to it)...
Problem exists in all computers, Mac, pc, linux
Did you try what I suggest in Post #6 above?
This worked for me when I had the same issue. adb and fastboot would work, but it would not mount MTP.
And just in the last day or 2 I helped someone else with the same issue and fix.
The phone doesn't show up in device manager.
Have you modify the Kernel? (Applying some settings for example)
I browsed over the web for this issue and found some people with the same problems. They solved by removing the settings applied on the kernel or flashing a new one.
I've flashed various kernels and ruu, still same result
Still looking for help
I was trying to transfer some files to my phone through a USB cable today, but the phone was not recognized by the PC at all (Even though it was working a week or so ago). I had some issues before with the cable needing to be still in a certain position or it would disconnect from the PC, so I tried using another USB cable which didn't work either (I tested both USB cables with another device, and both cables were working and the other device was recognized by the PC).
I also updated the USB drivers on my PC with the official drivers on the ASUS support page, and tried putting my phone in fastboot and recovery mode, but both were still not being recognized by my computer. My phone still charges properly, but I am wondering if the USB port got damaged somehow so that it can't connect to a PC anymore?
pyroshroom said:
I was trying to transfer some files to my phone through a USB cable today, but the phone was not recognized by the PC at all (Even though it was working a week or so ago). I had some issues before with the cable needing to be still in a certain position or it would disconnect from the PC, so I tried using another USB cable which didn't work either (I tested both USB cables with another device, and both cables were working and the other device was recognized by the PC).
I also updated the USB drivers on my PC with the official drivers on the ASUS support page, and tried putting my phone in fastboot and recovery mode, but both were still not being recognized by my computer. My phone still charges properly, but I am wondering if the USB port got damaged somehow so that it can't connect to a PC anymore?
Click to expand...
Click to collapse
uninstall and reinstall the drivers. Ensure that phone is not connected during the process.
also have you upgraded your pc os ? if yes then its a little cumbersome to get the same working...
i changed from stock to cm, it is showing well now ... using RR now
Is your phone encrypted? If so you need to unlock in order for your pc to recognize it.
Thank you both of you for the help, unfortunately, my phone was not encrypted so there was no need to unlock in order for it to be detected. Uninstalling and reinstalling the drivers didn't work, and my PC was already on windows 10 since a few months ago. I would also prefer sticking to the stock ROM for this phone for now since they keep coming out with updates.
In addition, I tried using a USB OTG cable to see if the phone could detect the USB drive and my phone couldn't (it has worked before, and my old Galaxy Nexus could still detect it). I also tried plugging my dualshock 3 into the phone, and it also couldn't be detected (also had worked before).
It looks like it's actually a hardware issue and my only option is to RMA it now. I'll have to do it at a time when I don't need my phone as much or when I am not as busy.
PS: In case anyone else has this issue in the future, quick charging also no longer works
zenfone2 I also experienced that, and I have tried several ways, but remains unchanged. I was dizzy today :crying: