Develop Bugs

Which hard case would you recommend?

I much prefer slim hard cases, typically seidio brand. I can't seem to find a good alternate. Quality is much more important to me than price. What do you guys suggest?

I'm on my fourth case and they all suck. One scratches the phone. One turns it off when I'm not looking. One fits too loosely, and one got all dirty the first day.
I'm going to buy this one next in silver. I like the fact that it looks like there's really no case and it got good reviews on the case mate site. I'll let you know how I like it if you want.
http://www.case-mate.com/Samsung-Ga...axy-S-T-Mobile-Vibrant-Barely-There-Cases.asp

I've been using my case-mate tough case ever since they came out with them, and I can't speak highly enough about the quality and fit.

mrsbelpit said:
I'm on my fourth case and they all suck. One scratches the phone. One turns it off when I'm not looking. One fits too loosely, and one got all dirty the first day.
I'm going to buy this one next in silver. I like the fact that it looks like there's really no case and it got good reviews on the case mate site. I'll let you know how I like it if you want.
http://www.case-mate.com/Samsung-Ga...axy-S-T-Mobile-Vibrant-Barely-There-Cases.asp
Click to expand...
Click to collapse
I tried this case in silver and sent it back. I found that it degraded my phone signal. Of course, AFTER I buy it I do some searching and find other complaints on the silver cases for various phones.

murse said:
I tried this case in silver and sent it back. I found that it degraded my phone signal. Of course, AFTER I buy it I do some searching and find other complaints on the silver cases for various phones.
Click to expand...
Click to collapse
I haven't noticed any issues with the silver barely there case that I just got. But as far as protection goes, probably not the best one for this thread's request.
I also have a tough case, which I highly recommend for anyone looking for a solid case for protection.

Case-mate tough case is great, as someone allready stated I cannot recommend it strongly enough. You won't find a better case for the money or more imo
Sent from my SGH-T959 using XDA App

What about the body glove case? I was looking at that one for a hard case. What do you guys think about it? Anyone use it?

I have a body glove case and frankly it leaves alot to be desired. The case easily doubles the thickness of the phone, and with out fail turns out my jean pockets every time I use it. I'm not sure if i got a bad case or what but the case does not seal properly all the way around the phone. I have had the misfortune of dropping my case from table height (appx 3ft high) and the body glove case did protect the phone wonderfully. I have the full black and chrome case, not the clear back shell. I am in the process of deciding on a different case and thus far I am heavily leaning towards the case-mate tough case.

Mesh case. Love it... every other case makes a thin phone too large.
Sent from my SGH-T959 using XDA App

shreddintyres said:
I have a body glove case and frankly it leaves alot to be desired. The case easily doubles the thickness of the phone, and with out fail turns out my jean pockets every time I use it. I'm not sure if i got a bad case or what but the case does not seal properly all the way around the phone. I have had the misfortune of dropping my case from table height (appx 3ft high) and the body glove case did protect the phone wonderfully. I have the full black and chrome case, not the clear back shell. I am in the process of deciding on a different case and thus far I am heavily leaning towards the case-mate tough case.
Click to expand...
Click to collapse
Hope that doesn't happen with the one I just ordered. But everything else you say about the case sounds great to me. I don't know how many times I have almost dropped the phone from it slipping out of my hands while pressing the volume or power buttons. Do the black Case-Mate cases have a rubberized feel to them?

My vote is for the bodyglove case. I have been through 4 cases and this far is my favorite. It protects gives the extra bulk and looks slick. It also has a kick stand which I use all the time.
Sent from my SGH-T959 using XDA App

Case Mate tough case for me. Silicone inside prevents scratches and tough plastic outside offers some protection from falls.
Sent from my SGH-T959 using XDA App

Here is a couple pics of the body glove in action. By the way it protects well I have dropped it a couple of times and the case comes apart instead of the phone breaking. I dont know how you wear your phone but I slide the phone in my pocket with the clip sticking out.

Trident Case for Samsung Vibrant
Got the TPU case, good fit, but feels cheap. Got the mesh case, looks decent but not much protection. Got tired of waiting for Otterbox. Almost got the CaseMate Toughcase but they only come in black or pink. Then I came across this last week. Check out the plugs and the buttons, even the back camera has clear cover over it. Liked the attention to details so pre-ordered it. According to the website, they're being shipped this Wednesday 11/17. Since I'm new, I can't post the link, here are some photos of the product. Just google Trident Cyclops Samsung Vibrant. Be sure to "Like" them on Facebook to save the $6.00 shipping. I wish ElementCase would make an ION3 or Liquid Carbon for Vibrant. I'm so sick of iphony and ipotty getting all the good cases.

Mokie8 said:
Got the TPU case, good fit, but feels cheap. Got the mesh case, looks decent but not much protection. Got tired of waiting for Otterbox. Almost got the CaseMate Toughcase but they only come in black or pink. Then I came across this last week. Check out the plugs and the buttons, even the back camera has clear cover over it. Liked the attention to details so pre-ordered it. According to the website, they're being shipped this Wednesday 11/17. Since I'm new, I can't post the link, here are some photos of the product. Just google Trident Cyclops Samsung Vibrant. Be sure to "Like" them on Facebook to save the $6.00 shipping. I wish ElementCase would make an ION3 or Liquid Carbon for Vibrant. I'm so sick of iphony and ipotty getting all the good cases.
Click to expand...
Click to collapse
Here is a link with a nice video to the case you mentioned:
http://www.youtube.com/watch?v=sJzBAR4P-R4

I have a case that I bought from daydeal.com, its a hybrid case made from hard plastic on the back and soft tpu on the sides, it pretty good.
Sent from my SGH-T959 using XDA App

I got my silver case mate barely there and it is awesome. I guess it is more of a looks than protection thing, but the front of the case is over the bezel so when the phone is face down there's still a gap. The silver is really good looking. Case mate also sent it the day I ordered, and I got it from GA to CA in 3 days.
murse said:
I tried this case in silver and sent it back. I found that it degraded my phone signal. Of course, AFTER I buy it I do some searching and find other complaints on the silver cases for various phones.
Click to expand...
Click to collapse
Are you sure it wasn't just a coincidence? The complaints were about the chrome, not the metallic silver. I haven't seen anything, and my phono widget says the signal is as strong as ever.

I really like this:
h tp://cgi. bay. om/ws/eBayISAPI.dll?ViewItem&item=370454207751&ssPageName=STRK:MEWNX:IT
- sorry - no outside links allowed on my xda account yet(?). You can figure out what shoud go in the spaces...
It's hard plastic with a rubbery feel. It's smooth enough to slide into my pocket and not pick up lint, but sticky enough that it can sit on my center armrest in the car without worrying about it sliding off.
There's also about a 1/16th inch high border around the screen that does a good job of keeping down any chance of a drop resulting in the screen touching anything the ground.

budney said:
Hope that doesn't happen with the one I just ordered. But everything else you say about the case sounds great to me. I don't know how many times I have almost dropped the phone from it slipping out of my hands while pressing the volume or power buttons. Do the black Case-Mate cases have a rubberized feel to them?
Click to expand...
Click to collapse
Figures!!! The upper left corner of the body glove case doesn't want to keep closed. I just sent an email to the seller for a refund. I'm thinking of just getting a extended battery with a rubberized back cover, and a new pouch to fit it.

Yea that's why I have the casemate now, hopefully you didn't order it on ebay there was this one seller that I bought it from and he would not repond to my messages about the case, also my bodyglove case won't stay closed at all anymore. I just think their quality control isn't all that great.
The tough case feels like abs plastic and is textured so it doesn't catch on pocket lining when you pull the phone out your pocket but it still feels good ib your hand and doesn't feel like its going to slout og your hands
Sent from my SGH-T959 using XDA App

Looking for the thinnest case?

I really like the Seidio cases and wondering if there is another really thin case?
Thanks

Barely There by Case-Mate. But doesn't really offer any protection from being dropped. Other than that I love it

cool
Just want something to keep the desk scuffs off, not worried about dropping
Thanks

That's the one. $13 at Newegg. Dropped my phone plenty of times no damage

http://www.myincipio.com/HTC-EVO-4G-Cases-Accessories/Incipio-HTC-EVO-4G-EDGE-Hard-Shell-Case.asp
I have this one, got it on ebay a little cheaper.

aeo 37 said:
Barely There by Case-Mate. But doesn't really offer any protection from being dropped. Other than that I love it
Click to expand...
Click to collapse
I agree, I love this case. Most people can't even tell my Evo has a case on it. I've been told many times that I was an idiot for having a "naked" phone. It's great to show these people that the phone is protected and then ask them, "who's the moron now!"

Yeah, for me I am not really worried about dropping the phone. I just wanted something that I can gently toss/ slide on the table and not have to worry about the camera lens scratching.
Even then I thought the Barely There case made the phone kind of wide. LOL. Now I just brought the Sprints Extended battery to make my phone last through the day and at the same time I can get ride of the wideness of the phone. It is now thicker but still easy to hold.

The best cases I have been able to find are the knockoff TPU Cases on eBay.
They are durable as all-hell (practically scratch proof) super thin and add very little bulk to the phone. They also protect the screen and camera with slightly raised lips. The side buttons are extremely responsive in these cases as well plus the cases are about $2.50 so they are a great value. If you get the black case, it will be difficult to tell that your phone is even in a case at all.
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150521797259&ssPageName=STRK:MEWAX:IT#ht_1396wt_813
shop.ebay.com/easytocart/m.html?_nkw=TPU&_sacat=0&_odkw=&_osacat=0&_trksid=p3911.c0.m270.l1313
Look for the cases that have the little red tag on the back, these are the best ones. There ones that come in bright transparent colors without the tag are thicker and the side buttons are harder to use with them.

Here are ones I sell for 10 bucks free shipping, you can get these of amazon or ebay but the ones I see are alright quality but hey search around
Sent from my PC36100 using XDA Premium App

Wrong thread sorry
Sent from my GT-P7510 using XDA Premium App

another vote for case matte barely there. I can say that i have dropped my phone from chest height before and the case holds up. Of course there is that 1 in a million drop but for the most part the case is solid and naked feeling

almightywhacko said:
The best cases I have been able to find are the knockoff TPU Cases on eBay.
They are durable as all-hell (practically scratch proof) super thin and add very little bulk to the phone. They also protect the screen and camera with slightly raised lips. The side buttons are extremely responsive in these cases as well plus the cases are about $2.50 so they are a great value. If you get the black case, it will be difficult to tell that your phone is even in a case at all.
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150521797259&ssPageName=STRK:MEWAX:IT#ht_1396wt_813
shop.ebay.com/easytocart/m.html?_nkw=TPU&_sacat=0&_odkw=&_osacat=0&_trksid=p3911.c0.m270.l1313
Look for the cases that have the little red tag on the back, these are the best ones. There ones that come in bright transparent colors without the tag are thicker and the side buttons are harder to use with them.
Click to expand...
Click to collapse
for 2 bucks, couldnt resist. thanks for the tip.

Go into the kitchen and get a piece of plastic wrap! Really thin and cheap!

Definately rock the tpu, they are thin, cheap, durable, not flimsy like the silicone models, and kind of grippy so they don't slide around much- in the car. You won't be disappointed.
Sent from my PC36100 using XDA App

*NEVERMIND*

Ringke, the best $16 I have ever spent and best case I have ever had.
http://www.rearthusa.com/EVO-4G_c_79.html

xlGmanlx said:
another vote for case matte barely there. I can say that i have dropped my phone from chest height before and the case holds up. Of course there is that 1 in a million drop but for the most part the case is solid and naked feeling
Click to expand...
Click to collapse
I vote for casemate barely there as well... I dropped my evo out of my SUV( like an idiot it was in my lap and I forgot) and it landed in the street and my screen was fine. I know a couple people who have had there screen shatter using the Innocase so I think it is more about luck on if your screen shatters or not. So I am just using the Phantom Skinz black carbon fiber Chromatics. if my screen breaks it breaks, that is my fault lol.

Seidio Innocase 2 Surface are somewhat thin and offer good protection. Bestbuy rebrands that case as the "Platinum Series"

+1 on casemate
I'd been through 4 or so cases before I settled on the Barely There case by Casemate.
Other cases were either lint magnets or actually damaged by phone with scuffing and scratching when I removed and put them back to get access to the battery or whatever.
There was no point in trying to keep it pristine anymore so I wanted to go naked with it, but the camera was still an issue. No case means the camera can get scratched since it's raised. So I found the Barely There case and it's the closest I can come to going naked but having some minimal protection for the body of the phone and also keeping the cam lens away from surfaces when I place it down.

I don't like the 2 piece hard shells, if you drop them you're usually done with the phone as they snap off

Rockin' a case, or running naked?

Was just wondering if you guys are or are not using a case, holster, ect. for your phone.
if your are using one if you could say which one and maybe some pros/cons, how you like it type of stuff.
I'm currently waiting on the otter box commuter to arrive, I had the incipio case much like the commuter and loved it but felt the commuter would add the extra protection I need.

Naked. I can't find a good case for my Dinc2 with ext battery.
Sent from my ADR6350 using XDA Premium App

Case. Really like the new kickstand Verizon case. Sits the phone up AND awesome holder for the finger when using it. Doesnt protect the whole phone though so Im going with the eBay Griffin Reveal look alike for now.

Boogersugar83 said:
Naked. I can't find a good case for my Dinc2 with ext battery.
Sent from my ADR6350 using XDA Premium App
Click to expand...
Click to collapse
Naked, for the same reason.

I'm going nude also. I roll with a naked Dinc2 because the slimness was one of the reasons I chose this phone, and since it is on my works company plan, if anything does happen to it I will get a new one no charge (to me that is, my company may get hit with a bill).

Has anybody tried the body glove for the Inc2.
Sent from my incredible 2 using XDA Premium App

Running naked. I don't like how cases bulk up the phone. Haven't run with a case for many years now across several devices without incident, and my devices have survived numerous drops.

I have the silicone one from the verizon store naked feels too slippery to me i'm afraid its going to slip out of my hand on the subway. Its doing pretty good. dropped it once on the stairs in the subway and its still fine. the only thing that bothers me is sometimes i have to take the case off to use the headphones jack. can anyone recommend another one? (i like silicone cause it lets me get a good grip on it. too afraid i'd drop it otherwise)

Anybody check out the TPU cases for this phone? I also admire the slimness of the DInc2 and was thinking about this as an alternative to both hard and silicone cases.
Cheap on Amazon too.
EDIT...nvm saw the TPU thread down below. Definitely getting one!

Using the Incipio two piece case half the time, the other half running naked just for the slimness of the phone

Naked.
Look at this phone. It's basically already wearing a case. I mean, I know accidents happen but I feel like this phone was designed to not need one.

I have the otterbox defender series and love it. Adds a lot of bulk if your not into that.
Would love to get there extended battery if they would get a case to fit it.
Sent 2 u via Incredible 2

thenickisme said:
Naked.
Look at this phone. It's basically already wearing a case. I mean, I know accidents happen but I feel like this phone was designed to not need one.
Click to expand...
Click to collapse
once you scratch that aluminum in the front though you will be sorry. even WITH a case I dropped my phone in between my dashboard in my car and my seat and it scratched the aluminum so I had a nice long scratch of the aluminum. sucks.

ACD168 said:
once you scratch that aluminum in the front though you will be sorry. even WITH a case I dropped my phone in between my dashboard in my car and my seat and it scratched the aluminum so I had a nice long scratch of the aluminum. sucks.
Click to expand...
Click to collapse
Aluminum? On the earpiece grill? That's the only part I can think of that you're referring to...

the whole front is aluminum from what i saw from the scratch. it sure isn't plastic..
the entire casing besides the back case,, give it a run with ur finger nail, once that starts chipping, or you scratch it you will see what i mean, i could be way off with the aluminum but it sure isnt plastic like inc1

ACD168 said:
the whole front is aluminum from what i saw from the scratch. it sure isn't plastic..
the entire casing besides the back case,, give it a run with ur finger nail, once that starts chipping, or you scratch it you will see what i mean, i could be way off with the aluminum but it sure isnt plastic like inc1
Click to expand...
Click to collapse
It is something close to aluminum or other soft metal, at least that's what I thought. I also scratched the edge of mine just taking off a mobi hard plastic case I bought. Didn't take much at all to make a scratch.
Now, the back is plastic but made to feel the same as the front but I'm pretty sure it's not.

mountaineerndixie said:
It is something close to aluminum or other soft metal, at least that's what I thought. I also scratched the edge of mine just taking off a mobi hard plastic case I bought. Didn't take much at all to make a scratch.
Now, the back is plastic but made to feel the same as the front but I'm pretty sure it's not.
Click to expand...
Click to collapse
I agree 100%.
if it's the hard gel case from verizon, I bought mine the day it came out, it was the only gel case they had, but they gave me a full refund as there was a Tech Bulliten out fromm what I read here on the forusms, no receipt or anything and it was a diff store and got my money back so I was happy, cmae home and ordered an ottterbox. sucks just from a case the potential for damage is there. hopefully in a few months we don't have a bunch of complaints about this. I returned my scratched device for a refurb. no charge. told them it happened with a case on it. they had no prblem with refurbing it.

Using a cheap TPU case off Amazon for now. Waiting to find that "perfect" case for my prem-case.
I wish they made these for the DInc2. I would pay big bucks for that.

TheAtheistReverend said:
Using a cheap TPU case off Amazon for now. Waiting to find that "perfect" case for my prem-case.
I wish they made these for the DInc2. I would pay big bucks for that.
Click to expand...
Click to collapse
wood? I wonder how well that would protect that. personally I would never put that on my phone. but it's cool. I am awaiting on the otter box commuter to arrive on Tuesday, and I can say from experience, that otter box is very well made cases, and come with a screen protector if you're into that.. I don't use them, but I will give pictures and a review once the case comes and I use it for a day or two. high quality case, can get it cheap on amazon, and great brand name, that isn't bulky. they also make a defender case, which isn't my style but looks like a truck could run over it and be fine lol.
links
commuter - LINK
defender - LINK

Yeah, I used the Seidio for my Eris, and I am considering it for my DInc2. Never been real hot on the Otterbox look, though I haven't seen one in person. I like my cases low profile and simple looking. Maybe I'll meet an Otterbox one day and fall in love.
I don't even care if the wood case broke the first time I dropped it. If I could find a good one I would rock that thing like hobos rock trench coats and buy another if it broke.
I wood pay more for the case than I would the phone.

Great case.

Just got this in the mail. It covers all of my buttons (volume rocker, and power) and leaves everything lined up perfectly for the plugs. It fits like a glove, and it has a perfect silicone feel to it. I paid 7.95, and the shipping was very fast. From CA to MI, I got it in 4 days with no extra shipping charges.
Link: http://www.ebay.com/itm/Silicone-So...se-Samsung-Epic-4G-Touch-Sprint-/190577624793
I would strongly recommend this case because it helps conserve your hardware buttons.
EDIT: I just realized the sale has ended, and I am sure people sell the same exact case. Just look around Ebay and Amazon.
Great alternative to the TPU cases everyone is talking about.
Sent from my Galaxy S II

Can you upload some pix of the case?
Sent from my SPH-D710 using XDA App

Yea I got one from ebay as well for..$5.95 I believe. It's not the best case but it fits like a glove and is raised above the screen and camera to prevent you from setting it down straight on them. It adds a little bit of width but truthfully this is just an In-between until the casemate barely there, and it's a cheap way to protect your phone until then!
Sent from my SPH-D710 using XDA App

Nyckrs said:
Can you upload some pix of the case?
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
Yeah man I will when I get a chance. I'm currently on my phone right now lol.
Sent from my Galaxy S II

the description says Anti Dust Silicone Material, do you get any lint/dust on the case? My last silicone case for the Evo4G is a dust magnet, it pretty much picks up all the pocket lint I've in my jeans.
thanks

Silicone can stretch, tear and become loose over time.
TPU does none of those and will always return to the original shape.

akak1997 said:
the description says Anti Dust Silicone Material, do you get any lint/dust on the case? My last silicone case for the Evo4G is a dust magnet, it pretty much picks up all the pocket lint I've in my jeans.
thanks
Click to expand...
Click to collapse
I honestly haven't had any problems, and I have had it in my pocket almost the entire day. No stretching, loose ends, I can't really verify it is anti-dust, because I have had the phone for a day lol. It feels great.
I'm glad I don't have to be paranoid of my phone all of the time now.
Sent from my Galaxy S II

BenKranged said:
Silicone can stretch, tear and become loose over time.
TPU does none of those and will always return to the original shape.
Click to expand...
Click to collapse
How would you know? You don't have the case?
I couldn't rip this case, unless I was literally trying to. And the case makes a "lip" over the screen, in case you want to set it on the table screen first. As far as stretching goes, I paid 8 dollars for an awesome case. If I need to replace it (2 years would be my guess), I will do so.
The great thing about Silicone, is that it looks clean and never gets scratches, looks cheap, and fits great on the phones.
Take my word for it or pay 24.99 at the Sprint store lol. The case didn't even cover the entire outside of my phone, and I broke the kickstands on it almost immediately. Complete garbage.
Sent from my Galaxy S II

Not a very good case... long term
In my experience, silicone cases are a temporary fix at best. I have bought several and always end up replacing them within a few weeks. But for the price, it's probably not a bad temp case until you find the best one for your needs. I ordered a TPU case for $9 and hope to get it today as I just got my phone from letstalk yesterday.

mrpickem said:
In my experience, silicone cases are a temporary fix at best. I have bought several and always end up replacing them within a few weeks. But for the price, it's probably not a bad temp case until you find the best one for your needs. I ordered a TPU case for $9 and hope to get it today as I just got my phone from letstalk yesterday.
Click to expand...
Click to collapse
Cool man let me know how you like it! I was so close to buying one, but they were out of stock.
Sent from my Galaxy S II

akak1997 said:
the description says Anti Dust Silicone Material, do you get any lint/dust on the case? My last silicone case for the Evo4G is a dust magnet, it pretty much picks up all the pocket lint I've in my jeans.
thanks
Click to expand...
Click to collapse
love mine feels like a rearth. dont think it will stretch feels great in the pocket. doesnt stick like others i have had with other phones. but feels great in the hand im in hot weather so i have sweaty hands from time to time. so the tpu get kinds slippery. this gel i like a lot. recommend def till you find what you like a hard case. or like me a case with a kickstand. and i found it for like 5 dollars on ebay or amazon.
remember now its from the accessory geeks on ebay.

HTC One Diztronic TPU Case Review

Beast of a case right here. Extremely thin, lightweight, and several different colors. I wouldn't expect anything less than that from Diztronic.
Amazon
Diztronic
If you guys have any questions about the case I would be happy to answer them. :good:

nice thanks !

Seems nice, but I can cover up this sexy phone with a case like that. I must be able to see it in it's glory. Lol I have pre-ordered a few Poetic Cases and will be in several weeks, they had issues at the factory the guy told me.

HotInEER said:
Seems nice, but I can cover up this sexy phone with a case like that. I must be able to see it in it's glory. Lol I have pre-ordered a few Poetic Cases and will be in several weeks, they had issues at the factory the guy told me.
Click to expand...
Click to collapse
Yeah the Poetic cases look great. I'll be picking some up soon and reviewing those as well.

Beast indeed.
I bought one back when they were branded TC for my Galaxy S2 as a holdover until Seidio started selling a case. It was one of the cheapest on Amazon at the time. A year and a half and many miraculous saves later I'm retiring the phone in near perfect condition. I'm definitely getting one for my One.

pokey9000 said:
Beast indeed.
I bought one back when they were branded TC for my Galaxy S2 as a holdover until Seidio started selling a case. It was one of the cheapest on Amazon at the time. A year and a half and many miraculous saves later I'm retiring the phone in near perfect condition. I'm definitely getting one for my One.
Click to expand...
Click to collapse
Yeah, I got my first one back when I had my Galaxy Nexus LTE. After being happily surprised I got both the hard shell and TPU for my Nexus 4 and will be using this one on my future HTC One. Hopefully sales are good enough for the TPU that they release a hard shell case.

That gray looks sexy for sure. Anyone know if it will yellow over time though? I sure want it but scared it will look ugly in a few months time.
Sent from my Nexus 4

Gja88 said:
That gray looks sexy for sure. Anyone know if it will yellow over time though? I sure want it but scared it will look ugly in a few months time.
Sent from my Nexus 4
Click to expand...
Click to collapse
I doubt it will grey over time. I've never had it happen to me on any case.

I ordered this case as well from amazon today. I can't help but notice the number of you guys posting from nexus 4 devices. I have only had the nexus 4 now for about 3 weeks yet I got the htc one today. I planned on returning it to bestbuy within my 14 day period to get the S4, but I will not part with this beast.

dxwilliams40 said:
I ordered this case as well from amazon today. I can't help but notice the number of you guys posting from nexus 4 devices. I have only had the nexus 4 now for about 3 weeks yet I got the htc one today. I planned on returning it to bestbuy within my 14 day period to get the S4, but I will not part with this beast.
Click to expand...
Click to collapse
Yeah I'm scared to make the switch to HTC and sense since I've had stock since the gnex lte but I've never owned an HTC device and I always thought sense looked nice. I've heard so many bad things about it that it has me worried, but I guess I've gotten bored of pure stock for a bit and its time to try something new. Either way I can't wait to try it out. Hopefully its worth it!
Sent from my Nexus 4

I got my Diztronic Gray TPU case today, and since I've been using the HHI (purchased from that $0.99 sale last week) I figured I'd share the differences having them both in hand.
As I said above, I had a Diztronic TPU on a previous phone and enjoyed it although it had a few flaws (excess molding flash around buttons, missing NC mic hole). Being a tightass I jumped on the cheap HHI case deal, figuring I'd take a chance on other manufacturers matching that same quality.
And I was rewarded for my cheapness with a cheap case. The HHI case has two big problems as far as I'm concerned. The cutout for the power button is pill shaped, following the contour of the button and projecting upwards away from the case. It doesn't leave much room for a finger to press, especially when trying to use your index finger when one-handing it. I remedied this with an X-Acto and a soldering iron to smooth the cut, opening up the button hole towards the back of the case. More troubling though is the fit around the front of the case. HHI managed to get the back of the case to fit the curves of the One nicely. However they didn't account for the bevel around the One's bezel. The side effect of this is that the corners don't stretch the front portion enough, leaving the sides to bow out a couple of mm at the center of each side. I don't think this would affect the function of the case in an impact, but at best it ruins the straight line aesthetic of this phone. One lesser annoyance is the molding seam that runs the entire perimeter, which isn't distracting to the touch but is very obvious against the transparent side pieces.
The HHI seems like it would be a functional case from the aspect of being protective: it covers the corners with shock absorbing TPU and protects the bezel where it counts. It goes in and out of pockets easily and the matte clear blends well with the color of the silver phone.
Today the Diztronic came in and the extra $11.51 proved well worth it. The Diztronic case fixes both of the issues I had with the HHI: the power button cutout is nearly flush with the button at the front and back, making it easy to push, and the front fits snug and stays straight along the edges. Like the HHI, the cutouts all line up ok, and while it doesn't make a functional difference the camera cutout is centered maybe 1mm too low. Unlike the HHI, the molding seams are small and in the corners. My previous TPU case experience was with a black case, so time will tell if I'll see this one turn yellow after a few months. If that happens (and supposedly it's inevitable with clear TPU) I'll buy the black version without hesitation.
TL;DR: The HHI and Diztronic TPU cases both do their jobs, but the Diztronic is well worth the extra money for the fit and finish.

Nxxx said:
Beast of a case right here. Extremely thin, lightweight, and several different colors. I wouldn't expect anything less than that from Diztronic.
Amazon
Diztronic
If you guys have any questions about the case I would be happy to answer them. :good:
Click to expand...
Click to collapse
SH*T. lol i just spent awhile putting a video together for these cases. hahaha
http://www.youtube.com/watch?v=czwrO4AWlQ0&feature=youtu.be

I don't like how the logo and branding has gradually gotten larger and larger as well as the price increase.

fightr said:
I don't like how the logo and branding has gradually gotten larger and larger as well as the price increase.
Click to expand...
Click to collapse
The logo is so small though... And it's only $11! Haha
Sent from my HTC One using xda premium

beforedenied said:
The logo is so small though... And it's only $11! Haha
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Haha 'tis is true but I remember I got my HTC One S case for approximately $7 or so but
nevertheless I am quite content with this case! I just recieved it today, so far so good. I was a little concerned that it would cover the camera a little as the cutout looks really tight and possibly even touches the lens but it actually doesn't affect the pictures which is fine for me!
Otherwise I'm liking it! I feel like it is definitely a little more protected than it would be naked but slim enough to not make much of a difference although I do miss the aluminum unibody feel a little..
Just to add, definitely not going to protect much from a crazy fall or anything but I already knew that when I decided to purchase it.

Purchased this case after seeing everyone's reviews here. Thanks everyone!