Related
hey.
i followed the guide for rooting my galaxy nexus.
driver installation was alright, and then i switched to fastboot mode (green android) and then the device manager didn't recognize my gn (unknown device).
tried uninstalling and then reinstalling, tried "updating" it with various rar files i found on this forum and ofcourse i tries pdanet.
none of them worked. it was always unknown device.
then i had no choice and i removed the battery to boot it normal.
suggestions? thnaks
After installation, plug in your phone, look at your system tray for the USB icon, click it. It should show a status of installing more drivers. This can take awhile, and for a lot of people it seems to fail the last step, Android 1.0 drivers. Open control panel, system, device manager. Look for a yellow error icon. Click that, choose to install drivers manually and locally. Then select 'choose from list', find Samsung.
That should get you back on track
Sent from my Galaxy Nexus Bugless Beast 4.0.3 lte +franco#5
Were you able to unlock the bootloader? If you didn't do this, don't go installing any driver... be very careful. If you install the wrong driver in device manager, you'll screw it up. I installed the wrong driver on my main computer and I couldn't get the device manager to even recognize the phone :| I couldn't locate the right driver either because once I installed the driver, it renamed it. It was a huge pain and the only way I got this to work was by using a different PC with the correct drivers.
I have found this to be the best instructions for unlocking the bootloader. Most importantly, it includes directions on how to gain access to adb on your phone properly. Take your time and follow the instructions exactly...
Dutchy18 said:
hey.
i followed the guide for rooting my galaxy nexus.
driver installation was alright, and then i switched to fastboot mode (green android) and then the device manager didn't recognize my gn (unknown device).
tried uninstalling and then reinstalling, tried "updating" it with various rar files i found on this forum and ofcourse i tries pdanet.
none of them worked. it was always unknown device.
then i had no choice and i removed the battery to boot it normal.
suggestions? thnaks
Click to expand...
Click to collapse
I had the same issue, install pdanet and your phone will be recognized when in fastboot
Sent from my Galaxy Nexus using xda premium
i followed one of the main guides on this forum.
it says to install the pdanet drivers and then boot to fastmode via the volume buttons.
once i got into fastboot, the device was unrecognizable.
when i was still in normal boot, the device was recognized and it was all right. and yeah i turned usb debugging on.
how can i unlock the bootloader without installing drivers?
thanks
Dutchy18 said:
i followed one of the main guides on this forum.
it says to install the pdanet drivers and then boot to fastmode via the volume buttons.
once i got into fastboot, the device was unrecognizable.
when i was still in normal boot, the device was recognized and it was all right. and yeah i turned usb debugging on.
how can i unlock the bootloader without installing drivers?
thanks
Click to expand...
Click to collapse
silly question, but after booting to fastboot, you are using the fastboot.exe, and not adb? if you type "fastboot devices" does anything show up?
no, nothing shows up.
and thats clearly because the driver is not installed correctly.. i see a yellow sign in device manager.
what am i doing wrong? only thing i was different from the guide is that instead of typing adb reboot bootloader, i got into fastboot by pressing the volume buttons.
Dutchy18 said:
no, nothing shows up.
and thats clearly because the driver is not installed correctly.. i see a yellow sign in device manager.
what am i doing wrong? only thing i was different from the guide is that instead of typing adb reboot bootloader, i got into fastboot by pressing the volume buttons.
Click to expand...
Click to collapse
click open that yellow unrecognized device...manually choose drivers (don't do auto), and select from the list, you'll see samsung, choose the driver
that should install android 1.0...alot of people have gotten this error.
edit: another thing to keep in mind is, after installing the drivers, and fixing the device in device manager, it can still take a little bit to initialize. in your system tray there should be a usb icon, open that to see when the drivers are done
I am in the same boat. I tried for hours on 2 different Windows 7 laptops (both 64bit). I am trying to get Yakju from one of the derivitives (without unlocking the device).
Steps taken:
- Dloaded Samsung USB driver 1.4.6 & Installed: Did not recongnize in explorer or Odin (even Odin did not show a thing)
- Dladed PDA Net A302x64: Did not recognize in explorer or Odin.
Both times the GN is in Device/Printers and listed as having Android 1.0 driver. I try to manually update, but cannot seem to find driver in list (as it just has Android 1.0 driver listed). Any suggestions?
i didnt even see the "Android 1.0".. just "unknown device" all along..
i also tried on a different computer.. same issue.
about manually installing the driver.. i tried pointing him to a manual driver package i got from this forum.. it said its the same driver..
when im searching for "samsung" on the list, i dont see a relevant driver.
Well, i've saw someone else on here who was having driver issues, who also had installed both samsung & pda drivers...
uninstall both.
fresh install ONLY the naked drivers directly off samsungs website (http://www.samsung.com/us/support/downloads/verizon-wireless/SCH-I515MSAVZW -- if you're verizon, if not, you can search there). Do the install. Plug the phone in, it will start to install its usual crap. this is the long part. then, it will fail like you saw before. in device manager, you'll see the unrecognized device. Open, it will ask you to find drivers, choose "Browse", "Let Me Pick From a List", "Samsung", and then pick the driver with the date 11/25/2011
check to see if there are any other unrecognized devices in device manager, just to be sure you got em all. at this point, plugging in your phone should show the USB connected icon in the system tray. do you see this? If you click it does it say "Eject MTP"?
Hiya everyone! Former Galaxy S2 user here, and now rocking this baby!
as it normally goes... i have a problem ( no **** sherlock ? )
I, for the fu** of me, can't install adb drivers on my pc, no matter what I try...
I'm using Win7 home premium.
Fastboot drivers install well and they always connect, but no matter what I try , the adb ones wont...
Tried mskip's GNEX toolkit method - didn't work
Tried 1wayjonnys universal naked driver - didn't work
Tried pdanet thingy - won't recognize phone - didn't work
Tired manually installing samsung drivers - didn't work
I'm kinda running out of options here, and my head is starting to hurt. Anyone got any clue of what I might be doing wrong ?
Uninstall the drivers you used, and use 1wayjonny's universal naked driver.
1) Download the driver and extract the files to a directory;
2) Boot your device normally, and plug it into your PC (using a good USB cable, like the one that came with your GNex);
3) Open device manager and find your device - it should have a yellow exclamation point beside it;
4) Right-click on it and select Update Driver, and select choose location (or whatever the option is to install it manually, not automatically);
5) Navigate to the folder where you extracted 1wayjonny's driver and select it.
6) Done.
Thanks, managed to do it prior to your reply, trying the naked drivers for tje third time and it worked
Sent from my Galaxy Nexus using XDA
Okay, this is the second time this error has popped up and it's starting to get on my nerves. Anytime I plug my phone into ANY USB port, and this is counting both 2.0 and 3.0 ports, I get the error bubble: Hardware ID Missing. Windows cannot identify the device plugged into the SAMSUNG Mobile USB Composite Device." Honestly, this is beyond irritating.
For one, I am not going to reinstall Windows 7. That's too much hassle for this. Second, ever since someone plugged their Droid into my USB cable so they could charge up their phone, this message started appearing. I tried to reinstall drivers (Samsung driver exe said it couldn't install), uninstall, disable, etc etc, but finally managed to get the damn computer to read it when I stuck it in the 3.0 USB port. Now, just 10 minutes ago, I plug the phone in, I get that error, on a 3.0 USB port.
So, now I have no idea what is going on, nor how to fix it. I've tried searching, but there are no answers. Or, the possible "solutions" don't even work even remotely close.
I could really use some help on this. And, again, please do not mention "Reinstall Windows". That's just too much of a hassle and I'm not going to do that.
You may not want to try this either but try a system restore
Sent from my SPH-L710...if some one helps you press the thanks button
Volknochi said:
Okay, this is the second time this error has popped up and it's starting to get on my nerves. Anytime I plug my phone into ANY USB port, and this is counting both 2.0 and 3.0 ports, I get the error bubble: Hardware ID Missing. Windows cannot identify the device plugged into the SAMSUNG Mobile USB Composite Device." Honestly, this is beyond irritating.
For one, I am not going to reinstall Windows 7. That's too much hassle for this. Second, ever since someone plugged their Droid into my USB cable so they could charge up their phone, this message started appearing. I tried to reinstall drivers (Samsung driver exe said it couldn't install), uninstall, disable, etc etc, but finally managed to get the damn computer to read it when I stuck it in the 3.0 USB port. Now, just 10 minutes ago, I plug the phone in, I get that error, on a 3.0 USB port.
So, now I have no idea what is going on, nor how to fix it. I've tried searching, but there are no answers. Or, the possible "solutions" don't even work even remotely close.
I could really use some help on this. And, again, please do not mention "Reinstall Windows". That's just too much of a hassle and I'm not going to do that.
Click to expand...
Click to collapse
I had the same issue what ended up fixing it for me was watching when I plugged the phone in after a clean driver install and stopping Windows from downloading and installing an updated driver. Dont know if its the same for you but that fixed it for me. I was really frustrated by it and found no help either.
probably an easy fix
definitely don't need to reinstall windows or do a restore. But just to be sure, you don't have kies installed right? Seems to cause problems.if there's no kies installed, go into the device manager and find your phone whatever it's listed as right click and uninstall. Check the little box that says, "delete the driver software for this device". do this for any devices relating to yours. Including the stuff under modems,ports,USB controllers.and tick that box that delete driver software for this device every time you uninstall something. Now, not saying it's necessary but wouldnt hurt, reboot the pc. Then with your phone unplugged, reinstall the Samsung drivers for the phone. Now to make sure windows doesn't DL its own drivers,disconnect from the internet and plug the phone back in. Should be all good.
I won't do a system restore, that won't do anything. Not to mention it would erase some programs that were installed (not related to phone). So, not doing that. Also, my computer will not automatically update any drivers or any thing else, as I have it set to manual mode.
And, I do not have Kies installed. It never worked for me properly, when it came to driver installation. I've done the "go into device manager" bit many times before, it still likes to play the "Hardware ID doesn't match" card. Drivers won't install either. I don't know what it is, but damn this is the most stubborn thing I've ever encountered.
i've post this in other forums today. what i do to get it working is i toggle USB debugging and try it out, then start toggling the ptp and mtp until it works. the combo that works for me is turn on debug, plug in computer, unplug, turn off debug, plug in. if it doesnt work then i toggle back and forth MTP and PTP. 5 tries at most, for me. Also, i did a nandroid back to my oem ICS that was 2 weeks old and just rooted. the problem is worse there. i'm using freegsmr6 with trinity kernel on Tmo. hope it helps.
Ditto
Yeah that whole "Hardware ID missing" was an irritating situation. This is what I recommend as far as making it work.
1. Plug in.
2. When you get the error message, I think its because of a conflict with the ADB interface. Go to Settings, Developer Options, and check off USB Debugging.
3. Plug in once again and it should work. If not, try toggling between Camera and MTP.
I have Windows 7 Ultimate and it works fine for me
I always get that error as well with my SGS 3. I have to reinstall Kies everytime it does that which is annoying.. ANyone has a permanent solution about this?
Fix for me was...
1-plug in phone. Get the hardware ID message. Leave phone plugged in.
2- open device manager. Click on. Android Phone and Uninstall Samsung Android ADB Interface. Also check the "delete software driver" when the dialog box shows.
3-still in device manager. Scroll down to Universal Serial Bus Controllers. Uninstall Samsung Mobile USB Composite Device.
4-unplug phone.
5-reboot pc.
6-install SAMSUNG USB drivers from their site or from here
http://www.epiccm.org/2012/06/cwm-recovery-on-all-sgs3-lte-variants.html?m=1
7-reboot or not. Plug in phone.
This worked for me and no issues for the last 6 days. YMMV..
this works!
stevounit said:
yeah that whole "hardware id missing" was an irritating situation. This is what i recommend as far as making it work.
1. Plug in.
2. When you get the error message, i think its because of a conflict with the adb interface. Go to settings, developer options, and check off usb debugging.
3. Plug in once again and it should work. If not, try toggling between camera and mtp.
I have windows 7 ultimate and it works fine for me :d
Click to expand...
Click to collapse
But why this problem now out of nowhere when everything worked fine before.
Sent from my SPH-L710 using xda app-developers app
Hardware ID missing - SOLVED!!
1. Uninstall any previous instance of Kies/USB driver
2. Download the latest Kies, specific to your S3.
3. Download Samsung USB drivers 1.4.6.0 (I've tried newer versions but they all failed)
4. REBOOT
5. Disconnect from internet (VERY IMPORTANT!!! - forcing Windows to install local drivers ONLY)
6. With the phone disconnected, install Kies + USB drivers downloaded in steps 2,3
7. Connect the phone and let Windows install the drivers.
8. Reestablish the internet connection.
I've done just that, I've connected my S3 to the PC several times, I've also rebooted twice and I've never seen that stupid message again - while of course everything works as expected.
:good::good:4 days later, several times rebooted (phone and PC), several connections with Kies and I have NEVER seen that error again - it works!!
UPDATE!! (Oct.11.2012)
After a few Kies updates and going through various ROM's:
- the procedure listed above works 100% but a few steps are just not needed (redundant) - see bellow
- the problem is mostly caused by Windows "forcefully" trying to install its own drivers, rather than allowing Samsung's suggested.
- Samsung's fault is providing "updated" drivers that don't always work (hence, use the suggested 1.4.6.0 drivers)
- Following EVERY Kies update, DISCONNECT from internet before plugging your phone (otherwise you'll have to go through this, AGAIN).
Some suggested here that plugging the phone into a different USB port (without disconnecting from internet) would be the culprit - which happens to be true, but as a mere effect, not the cause: every time an unknown device is plugged into a different USB port, Windows is trying to download/install the appropriate drivers if it doesn't recognize the hardware - and there you are again.
So, the simplified procedure becomes:
1. Not needed - leave Kies installed, as is - no harm at all
2. N/A
3. YES
4. Not (always) required
5. MUST
6. MUST
7. MUST
8. Yes
Furthermore, if still interested in connecting your I747(M) as UMS (USB mass storage) the solution presented here works. I tested it myself - read my comment on this post for the very few existing hiccups.
- while installing the USB mass storage device drivers you don't have to disconnect from the internet
Install Drivers
Have you tried just installing the drivers directly from Samsung? That is all I did when I had problems and it worked.
tyler1037 said:
Have you tried just installing the drivers directly from Samsung? That is all I did when I had problems and it worked.
Click to expand...
Click to collapse
For someone experiencing the "hardware ID missing" error, just reinstalling the drivers won't do anything. Like many others, I've been banging my head trying to solve this for quite some time; the suggested steps are truly a compilation of successful ideas and trials mingled with tons of frustration, coming from my own experience as well as from many different people and forums.
If, on the other hand, you had a different type of connectivity issues - without this error, then, yes, reinstalling the drivers is Samsung's recommendation.
billard412 said:
definitely don't need to reinstall windows or do a restore. But just to be sure, you don't have kies installed right? Seems to cause problems.if there's no kies installed, go into the device manager and find your phone whatever it's listed as right click and uninstall. Check the little box that says, "delete the driver software for this device". do this for any devices relating to yours. Including the stuff under modems,ports,USB controllers.and tick that box that delete driver software for this device every time you uninstall something. Now, not saying it's necessary but wouldnt hurt, reboot the pc. Then with your phone unplugged, reinstall the Samsung drivers for the phone. Now to make sure windows doesn't DL its own drivers,disconnect from the internet and plug the phone back in. Should be all good.
Click to expand...
Click to collapse
Just wanted to say thank you. Did this and the last 2 days, works everytime. I made sure that after the first time I plugged the phone in after doing all this, and the screen pops up asking what I wanted to do, made sure to check the box for "do this everytime" and then choose the view folder option or whatever that is.
Thank you again,
Whiteice
One thing I have tried which might help others - I had the Android Developers toolkit installed on my machine, which I've removed and I also removed the HTC Sync software which was for my old desire.
Rebooted, installed the SG Toolkit (can't remember which post I found it in) and then chose option one after selecting firmware to install drivers.
I cancelled the "Windows Updates" bit of the driver detection and it found the first item, and had "item disconnected" for the remaining three.
Unplugged and plugged back in and voila it works.
This worked for approx 5 mins and then stopped, however I did all the above with debugging on, debugging is now off and all seems well (touch wood). However looking at putting on a different kernal to expose storage as mass storage and also get around cifs issues.
Hope this helps someone.
nacos said:
1. Uninstall any previous instance of Kies/USB driver
2. Download the latest Kies, specific to your S3.
3. Download Samsung USB drivers 1.4.6.0 (I've tried newer versions but they all failed)
4. REBOOT
5. Disconnect from internet (VERY IMPORTANT!!! - forcing Windows to install local drivers ONLY)
6. With the phone disconnected, install Kies + USB drivers downloaded in steps 2,3
7. Connect the phone and let Windows install the drivers.
8. Reestablish the internet connection.
I've done just that, I've connected my S3 to the PC several times, I've also rebooted twice and I've never seen that stupid message again - while of course everything works as expected.
:good::good:4 days later, several times rebooted (phone and PC), several connections with Kies and I have NEVER seen that error again - it works!!
Click to expand...
Click to collapse
Thank you so much for this. This solution worked for me.
nacos said:
1. Uninstall any previous instance of Kies/USB driver
2. Download the latest Kies, specific to your S3.
3. Download Samsung USB drivers 1.4.6.0 (I've tried newer versions but they all failed)
4. REBOOT
5. Disconnect from internet (VERY IMPORTANT!!! - forcing Windows to install local drivers ONLY)
6. With the phone disconnected, install Kies + USB drivers downloaded in steps 2,3
7. Connect the phone and let Windows install the drivers.
8. Reestablish the internet connection.
I've done just that, I've connected my S3 to the PC several times, I've also rebooted twice and I've never seen that stupid message again - while of course everything works as expected.
:good::good:4 days later, several times rebooted (phone and PC), several connections with Kies and I have NEVER seen that error again - it works!!
Click to expand...
Click to collapse
Thanks for this i will try it tomorrow as still new to these tabs.
For moment i change to camera PTP and it pops up, so at least i can use it for now.
Will let you know how i get on.
Best wishes :good:
adamspud said:
One thing I have tried which might help others - I had the Android Developers toolkit installed on my machine, which I've removed and I also removed the HTC Sync software which was for my old desire.
Rebooted, installed the SG Toolkit (can't remember which post I found it in) and then chose option one after selecting firmware to install drivers.
I cancelled the "Windows Updates" bit of the driver detection and it found the first item, and had "item disconnected" for the remaining three.
Unplugged and plugged back in and voila it works.
This worked for approx 5 mins and then stopped, however I did all the above with debugging on, debugging is now off and all seems well (touch wood). However looking at putting on a different kernal to expose storage as mass storage and also get around cifs issues.
Hope this helps someone.
Click to expand...
Click to collapse
The Android Developers toolkit DOES install the USB drivers 1.4.6.0 - which seems to be the ONLY one that works, BUT the rest of the steps suggested in my previous post are needed in order to get rid of the problem - otherwise the fix is just temporary.
Re-loading OS drivers corrected issue.
tyler1037 said:
Have you tried just installing the drivers directly from Samsung? That is all I did when I had problems and it worked.
Click to expand...
Click to collapse
I removed the updates to Kies on my Note and uninstalled the Kies update on the PC which is what started this issue of the OS not recognizing the device and then a fresh driver load for my phone from the Samsung site. Worked Perfectly, Thanks!
Cowoholy
Let me say beforehand that I am a lifetime lurker. I would not be posting here if I hadn't already spent at least two days scouring the web for an answer.
My HTC Desire HD cannot connect to HTC Sync, but it can connect as a storage device, and can be seen by adb. Whenever it connects while in hboot/fastboot, it will flicker "USB" a few times before Windows tell me it's not recognized (Device failed enumeration code 43). This includes using the RUU wizard from HTC. That will just make it stick on "RUU" in the bootloader.
I have tried every driver download suggested on this site. I have switched USB cables three times (all htc cables). I have used two seperate computers (Windows 8 and Windows 8.1).
I'll admit I'm a nooby specifically to Androids. All I want to do is flash new ROMs/root my device. As far as I know this is step one, and I can't go any further until I've unlocked my bootloader.
EDIT: SOLVED
HTC Desire HD drivers really hates Windows 8 and 8.1. Installed Windows 7 32-bit and it worked just fine.
That error can be a pain in the ass. I have it as well. I believe disabling griver signature enforcement in win8 (it's your OS, isn't it?) should allow installing adb drivers, but I was too lazy to check it. As a workaround I instead flash the boot.img in bootloader by putting it to PD98IMG.zip
I can upload you a template, leave the txt in it and replace the boot.img with your desired one, choose store (none) compression level, then put the zip directly (don't use folders) in sd card
EDIT: I didn't fully read your post before. If you don't have S-OFF most probably you can't get away without adb drivers..
Turned off device signing. No effect.
Have you tried now manually installing drivers in device manager while the phone is in unrecognized state? Does it still say the drivers are incompatible?
If your OS is 64bit, you need these http://d-h.st/23V
I have those drivers. I installed them manually. I tried the updating the drivers through device manager and pointing them directly to the drivers folder I need, and Windows is insistent that not having ANY drivers installed is the best driver to have installed for my device.
I am getting a pop up saying that the device is failing to to start. It's not like other usb devices I might have plugged in and they just sit there in at least their correct category in device manager.
The part that ticks me off most, is that this exact problem on this exact model has been solved on three different forums, and each time the OP just said "nvm I fixed it" and never even bothered to explain how for the rest of us.
It's really hard not to curse right now.
in device manager update dialog goto
browse my computer --> let me pick --> have disk --> choose the .inf from the drivers path.
Ya, I had tried that too. None of them will work. It says the file I chose doesn't have compatible software for my device.
Once again, this only happens in the hboot/fastboot/RUU. Once the phone has loaded the OS it works totally completely fine, save for HTC Sync not seeing the phone and vice versa. I don't understand why some drivers would only work sometimes unless something is wrong with my bootloader, and if so, how do i fix it?
have you tried un-installing HTC SYNC?
SuperMechaCow said:
Once again, this only happens in the hboot/fastboot/RUU. Once the phone has loaded the OS it works totally completely fine, save for HTC Sync not seeing the phone and vice versa. I don't understand why some drivers would only work sometimes unless something is wrong with my bootloader, and if so, how do i fix it?
Click to expand...
Click to collapse
Nothing is wrong with your phone, same thing happens to me, I just thought disabling driver signing should fix it, like I said I was too lazy to check it since I found workaround for my needs.
TheJokah said:
have you tried un-installing HTC SYNC?
Click to expand...
Click to collapse
It is currently uninstalled.
@smoger:
I would try your workaround, but I' m not sure where to obtain the boot image I need. Also, I thought you could only change the S-Off if your bootloader was unlocked anyways?
Power down DHD and connect it to PC. I realized, my win7 was installing drivers, while phone was off.
Sent from my HTC Desire HD using xda app-developers app
ammo12 said:
Power down DHD and connect it to PC. I realized, my win7 was installing drivers, while phone was off.
Click to expand...
Click to collapse
It appears to be the same device/drivers when powered off or when in the Android environment. While in the bootloader, it shows as an unknown device.
I also noticed that only when I am trying to update via RUU, it says instead "Device Descriptor Request Failed"
SuperMechaCow said:
@smoger:
I would try your workaround, but I' m not sure where to obtain the boot image I need.
Click to expand...
Click to collapse
The boot.img is in the ROM-zip-file packed. But I think, if its a RUU it is called PD98...img
Try this, I know its from Samsung, but this installs fastboot drivers and drivers used for ADB access
https://www.dropbox.com/s/vqfuv8fifmrkkxt/SAMSUNG_USB_Driver_for_Mobile_Phones.zip
For the set of Google Drivers, go here too http://d-h.st/23V
My drivers list does not show the Google or HTC drivers like yours does after installing all the things in your links. In fact, that's the fourth time I've downloaded those Google/HTC Win7 64x drivers from people around the web. They are not in my drivers list after installing them via the INF files. I must be doing something wrong.
SuperMechaCow said:
My drivers list does not show the Google or HTC drivers like yours does after installing all the things in your links. In fact, that's the fourth time I've downloaded those Google/HTC Win7 64x drivers from people around the web. They are not in my drivers list after installing them via the INF files. I must be doing something wrong.
Click to expand...
Click to collapse
Did you browse to the folder where the manual driver files reside?
Sent from my Desire HD using Tapatalk 4
SuperMechaCow said:
Ya, I had tried that too. None of them will work. It says the file I chose doesn't have compatible software for my device.
Click to expand...
Click to collapse
SuperMechaCow said:
I have those drivers. I installed them manually. I tried the updating the drivers through device manager and pointing them directly to the drivers folder I need, and Windows is insistent that not having ANY drivers installed is the best driver to have installed for my device.
Click to expand...
Click to collapse
To be exact I have:
Tried HTC Sync
Tried HTC Drivers Installer
Tried to Automatically search for drivers
Tried to install drivers by using the inf Install option
Tried to manually select drivers by pointing to the folder the Win7 64x drivers were placed
Tried to manually install by picking out the exact inf files
Tried to install from device drivers list, were they were not listed
Tried these steps with driver signing turned off
Tried all of these steps with another PC
I still think the issue is related to the fact that it only has problems in the bootloader menu
Ok, like u know I had this issue. Now I randomly managed to fix it when I needed adb drivers for my new toy (Sanei tablet for 40$ lol)
The mistake I was making is that I was trying to install the drivers while device was in fastboot, but apparently you can get away with casual "My HTC" drivers which can be installed when DHD is booted into Android. It looks likethe phone is not being detected from bootloader (it doesn't like any of the drivers I had tried), but I can fully use ADB while it's in recovery or starting/trying to boot OS, so it should be enough for rooting/unlocking bootloader.
I remember with HTC Wildfire I had drivers package with seperate drivers for Android and fastboot, so I had to install different driver after rebooting to fastboot, but with these new drivers and win8 it doesn't work out this way.
Solved. Used Windows 7 32-bit. Windows 8.1 was the culprit.
Similar issue
SuperMechaCow said:
Solved. Used Windows 7 32-bit. Windows 8.1 was the culprit.
Click to expand...
Click to collapse
I am facing the same problem and I too have tried different methods like you did. Am using Windows 8.
Gotta try on Windows 7. Shall update if that solves my problem too.
I have recently root my samsung tab pro 8.4 wifi version. Everything seems to work well, except USB connection to my windows7 desktop. I installed the latest version of Samsung usb driver (download from Samsung's web site for my device). Whenever I connect it, media device mode, the "installing device driver software" icon spins for couple of minutes, then I got the error of "Device driver software was not successfully installed" . In the detail dialog window, it says "MTP USB Device" failed with a red cross. what did I do wrong? thanks.
I have tried several different USB 2 ports on my computers. Also I have Developer mode turned on, with or w/o USB debugging checked. Nothing seems to work. Also the camera mode doesn't work either.
Did you install kies 3 from samsung?, this should install all the drivers you need.
http://www.samsung.com/us/kies/
I tried with this version of kies from samsung's website, not working. Got the same failed to install device driver message.
In windows device mananger, it shows a MTP USB device with yellow "!" mark on it. If I try to update driver from here with the driver installed on my computer, it says I have the latest driver installed already.
dealcrack said:
I tried with this version of kies from samsung's website, not working. Got the same failed to install device driver message.
In windows device mananger, it shows a MTP USB device with yellow "!" mark on it. If I try to update driver from here with the driver installed on my computer, it says I have the latest driver installed already.
Click to expand...
Click to collapse
Try going to Device Manager in Windows, find the device, pick the option to select from the drivers on the computer, then pick the "USB MTP drivers" (generic, not Samsung) and see if that helps.
redpoint73 said:
Try going to Device Manager in Windows, find the device, pick the option to select from the drivers on the computer, then pick the "USB MTP drivers" (generic, not Samsung) and see if that helps.
Click to expand...
Click to collapse
thanks for your help. I tried your suggestion, and
I went to the Device Manager, and select the "MTP USB Device" with yellow "!" mark, choose this menu,
Update driver software->Browse my computer for driver software->let me pick from a list of device drivers on my computer
I see two drivers, however either works for my 8.4 pad. It says "This device cannot start (code 10)"
Also when I open the properties for this device in device manager, it shows its driver running is from Microsoft, driver version 6.1.7600.16385. Should be a driver from Samsung?
dealcrack said:
thanks for your help. I tried your suggestion, and
I went to the Device Manager, and select the "MTP USB Device" with yellow "!" mark, choose this menu,
Update driver software->Browse my computer for driver software->let me pick from a list of device drivers on my computer
I see two drivers, however either works for my 8.4 pad. It says "This device cannot start (code 10)"
Also when I open the properties for this device in device manager, it shows its driver running is from Microsoft, driver version 6.1.7600.16385. Should be a driver from Samsung?
Click to expand...
Click to collapse
Are you running stock TouchWiz ROM? Just to be sure.
Otherwise you could remove all your USB drivers related to Android and start from scratch with just the Sammy driver. I had to do that for my previous OnePlus One, it just wouldn't connect. It chose a wrong driver each time I hooked it up so I had to just remove those from the driver store and then make it choose another one. That was for ADB thought, but I guess it couldn't hurt to try anyways.
The reason I'm mentioning if you're on stock ROM is because this morning, on CM nightly 01-24 I had some troubles with my tablet being read by Windows, it was fixed in 26 so.. Just wanted to mention it.
CuraeL said:
Are you running stock TouchWiz ROM? Just to be sure.
Otherwise you could remove all your USB drivers related to Android and start from scratch with just the Sammy driver. I had to do that for my previous OnePlus One, it just wouldn't connect. It chose a wrong driver each time I hooked it up so I had to just remove those from the driver store and then make it choose another one. That was for ADB thought, but I guess it couldn't hurt to try anyways.
The reason I'm mentioning if you're on stock ROM is because this morning, on CM nightly 01-24 I had some troubles with my tablet being read by Windows, it was fixed in 26 so.. Just wanted to mention it.
Click to expand...
Click to collapse
Yes, I am on the stock TouchWiz ROM, but I rooted it following steps from one thread in this forum. Before rooting, I was able to connect. I do have a LG G3 phone connecting to the same computer successfully. Will this cause any problem? Will going to CM ROM solve my problem?
Also, can you tell me steps to remove all my USB drivers related to Android in Windows 7?
dealcrack said:
Yes, I am on the stock TouchWiz ROM, but I rooted it following steps from one thread in this forum. Before rooting, I was able to connect. I do have a LG G3 phone connecting to the same computer successfully. Will this cause any problem? Will going to CM ROM solve my problem?
Also, can you tell me steps to remove all my USB drivers related to Android in Windows 7?
Click to expand...
Click to collapse
It may work to install CM11 or CM12, BUT try this toolfirst (uploaded to my personal box account) Find all your mobile device drivers in this list and mark them and go to "File" and click "Uninstall marked drivers", restart your PC and plug in your tablet. Then try plugging in LG after so it gets drivers later. I'm not sure if it will work. But it should apply new drivers. If it doesn't work, uninstall the drivers one more time and download the Samsung drivers from 3rd party and install them and apply then manually to your tablet through Device Manager in Windows.
https://app.box.com/s/7njztz17hekfkpxbjk7h79xsctnmuptn
Anyways, try this first.
dealcrack said:
I do have a LG G3 phone connecting to the same computer successfully. Will this cause any problem?
Click to expand...
Click to collapse
Its always a possibility. I'd try to uninstall the LG drivers. You can always re-install later (if needed).
In a perfect world, the Sammy drivers would be what you want. But this is of course not a perfect world. I've had better luck using the "generic" Microsoft MTP USB drivers over the HTC drivers on my HTC devices.
CuraeL said:
It may work to install CM11 or CM12, BUT try this toolfirst (uploaded to my personal box account) Find all your mobile device drivers in this list and mark them and go to "File" and click "Uninstall marked drivers", restart your PC and plug in your tablet. Then try plugging in LG after so it gets drivers later. I'm not sure if it will work. But it should apply new drivers. If it doesn't work, uninstall the drivers one more time and download the Samsung drivers from 3rd party and install them and apply then manually to your tablet through Device Manager in Windows.
https://app.box.com/s/7njztz17hekfkpxbjk7h79xsctnmuptn
Anyways, try this first.
Click to expand...
Click to collapse
I download this tool, and remove all Samsung or Android related USB driver. Restart my computer and connect the pad it's not working. Then I uninstall the Samsung driver software, and all USB driver. Then restart and install a samsung driver from the thread about how to root my pad in this forum. Connect my pad, no luck. Still the same problem. I am about to give up.
redpoint73 said:
Its always a possibility. I'd try to uninstall the LG drivers. You can always re-install later (if needed).
In a perfect world, the Sammy drivers would be what you want. But this is of course not a perfect world. I've had better luck using the "generic" Microsoft MTP USB drivers over the HTC drivers on my HTC devices.
Click to expand...
Click to collapse
I uninstall my LG driver too, along with all Samsung/Android usb driver with the tool from previous reply. No luck, It still shows a MTP device with yellow "!" mark.
Just before I about to give it up, it connects to my another computer now, which is my main computer and it had trouble connecting to. All I did was restart my pad several time and odin twrp recovery to it. It connects after rebooting. No idea what cause this problem, but it works now. thank you for all your help.
dealcrack said:
Just before I about to give it up, it connects to my another computer now, which is my main computer and it had trouble connecting to. All I did was restart my pad several time and odin twrp recovery to it. It connects after rebooting. No idea what cause this problem, but it works now. thank you for all your help.
Click to expand...
Click to collapse
Glad you sorted it out, to some degree or other.
USB connectivity on Android devices is very tricky, at least on Windows (can't speak on other OSes). My HTC phone connects fine to my work laptop with the HTC drivers. On my home computer (also Win7) it frequently drops adb connection and I have to manually select the "generic" Microsoft drivers to make it work (and the HTC drivers never seemed to work completely right either). My Sammy Pro 8.4 seems to connect just fine to my home PC, however. So it seems its just a crap shoot what kind of connectivity you will get, really.