Develop Bugs

[DEV][02/May/2015]unOFFICIAL TWRP|v2.8.6.1

Introduction:
---------------------
Team Win Recovery Project 2.X, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. It’s a fully touch driven user interface – no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Phone look:
---------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Notice:
---------------------
The attached recovery images were compiled from TWRP's open source.
They were only tested on a European version of the HTC-HD2 powered by cLK bootloader.
The performance on devices powered by MAGLDR bootloader should be considered untested.
Disclaimer:
---------------------
As usual, use at your own risk. TeamWin, arif-ali or kokotas is not responsible for anything bad that may occur from using twrp2.
Nobody appointed me to compile TWRP for HD2. I'm not TeamWin's member. It just happened...
If anyone else is willing to do it and probably do it better I will be glad to step aside,​
Key Features:
---------------------
* Ability to save custom recovery settings
* Touchscreen driven with real buttons and drag-to-scroll
* XML-based GUI that allows full customization of the layout – true theming!
* Settings are saved to the sdcard and persist through reboots
* Ability to choose which partitions to back up and which to restore
* Ability to choose to compress backups – now with pigz (multi-core processor support for faster compression times)
* Basic file manager (copy, move, delete, and chmod any file)
* OpenRecoveryScript scripting engine
* On-screen keyboard in recovery! -- supports long press, backspace repeat, and swipe left deletes everything left of the cursor
* ADB sideload functionality from AOSP
* Pseudo-terminal emulator
* Ability to backup large partitions (size>4GB) by splitting the backup archive.
Mainline TWRP Change-Log:
---------------------
Follow up the changes in mainline project at TeamWin's page : http://www.teamw.in/project/twrp2.
HD2's TWRP Change-Log:
---------------------
Initial TWRP versions
List of changes
TWRP v2.4.0.0.r1 @ 2013.01.17
Compiled version based on mainline code (v2.4.0.0Alpha).
Fix boot partition's filesystem for MAGLDR's backup&restore to work.
Fix getting fs-type from a partition created with a label.
Fix the name of the backup sub-folder(htcleo instead of 0s).
TWRP v2.4.4.0 @ 2013.04.03
Compiled version based on mainline code (v2.4.4.0).
Fix boot partition's filesystem for MAGLDR's backup&restore to work.
Fix the name of the backup sub-folder(htcleo instead of 0s).
TWRP v2.5.0.0 @ 2013.04.10
Compiled version based on mainline code (v2.5.0.0).
NOTE: Compiled unmodified source code refused to boot! So I had to change a little bit more this time, just to get it to boot up.
Fix boot partition's filesystem for MAGLDR's backup&restore to work.
Fix the name of the backup sub-folder(htcleo instead of 0s).
TWRP v2.6.0.0 @ 2013.07.09
Compiled version based on mainline code (v2.6.0.0).
Fix boot partition's filesystem for MAGLDR's backup&restore to work.
Fix the name of the backup sub-folder(htcleo instead of 0s).
TWRP v2.6.1.0 @ 2013.08.31
Compiled version based on mainline code (v2.6.1.0).
Fix boot partition's filesystem for MAGLDR's backup&restore to work.
Fix the name of the backup sub-folder(htcleo instead of 0s).
TWRP v2.6.3.0 @ 2013.09.14
Compiled version based on mainline code (v2.6.3.0).
Fix boot partition's filesystem for MAGLDR's backup&restore to work.
Fix the name of the backup sub-folder(htcleo instead of 0s).
TWRP v2.8.6.0 @ 2015.04.30
Compiled version based on mainline code (v2.8.6.0).
Fix boot partition's filesystem for MAGLDR's backup&restore to work.
Fix the name of the backup sub-folder(htcleo instead of 0s).
Fix some ui bugs in the default theme.
TWRP v2.8.6.1 @ 2015.05.02
It is version 2.8.6 with a quick fix over a bug in the default theme engine that was causing an error during each boot.
Installation:
---------------------
Make sure you have adb and fastboot working. Please don't ask here questions about this - a simple web search will be enough to help you.
Make sure that the size of the 'recovery' partition is enough for the image to fit.
Make sure the name of the recovery *.img file is the one you use in the commands or in flash.cfg
[cLK/MAGLDR]
Flashing the zip file from Recovery
Download zip file to your computer and copy to /sdcard.
Reboot phone into recovery.
Select to install the zip file from your /sdcard.
Reboot Phone into recovery as normal.
[cLK/MAGLDR]
Flashing the *.img file while booted in Android
Download the recovery file to your computer.
If it is a zip file, extract the *.img.
(Win) Open the folder you have the recovery, do a [Shift+RightClick] and select "Open command window here".
(Lnx) Open the folder you have the recovery, RigthClick and select "Open in Terminal".
Execute the commands:
Code:
adb push recovery-leo.img /sdcard/recovery-leo.img
adb shell erase_image recovery
adb shell flash_image recovery /sdcard/recovery-leo.img
Reboot Phone into recovery as normal.
[cLK]
Flashing the *.img file while in fastboot mode(cLK menu)
Download the recovery file to your computer.
If it is a zip file, extract the *.img.
(Win) Open the folder you have the recovery, do a [Shift+RightClick] and select "Open command window here".
(Lnx) Open the folder you have the recovery, RigthClick and select "Open in Terminal".
Reboot phone into cLK menu (fastboot mode).
Execute the commands:
Code:
fastboot erase recovery
fastboot flash recovery recovery-leo.img
fastboot oem boot-recovery
[MAGLDR]
Flashing the *.img file while in USB Flasher mode(using DAF.exe)
WARNING!!! This will erase your current Rom on NAND too!
Download the recovery file to your computer.
If it is a zip file, extract the *.img.
Open the folder you have the recovery and place DAF.exe and flash.cfg in that same folder.
Edit flash.cfg according to required recovery partition size:
Make sure the .img file has the name that flash.cfg specifies!!
i.e. If the *.img file is named recovery-leo.img and min-required-size = 6MB then the flash.cfg could be:
Code:
misc ya 1M
[U]recovery rrecov|ro|nospr 6M recovery-leo.img[/U]
boot yboot|ro 5M
system ya 150M
cache ya 2M
userdata ya|asize|hr allsize
Check out the info about flash.cfg.
Connect the device to the computer via usb, enter MAGLDR and select USB Flasher option.
Right click on DAF.exe and select Run as Administrator.
Click [NEXT] when asked and wait to finish.
Download:
---------------------
HD2_TWRP_2.8.6.1.zip
md5: 93972887cfd3e017d16a09a74900496d
Info: You need to have a recovery partition at least 9 MB to fit the img
HD2_SD_TWRP_2.8.6.1.zip
Info: Extract to the root of your SD Card
Old Releases:
---------------------
HD2_TWRP_2.8.6.0.zip
md5: 882aaa25d9ff17613c64efe53c127d3a
HD2_SD_TWRP_2.8.6.0.zip
HD2_TWRP_2.6.3.0.zip
md5: 53c9522dbaa5ab465874258c01758143
HD2_SD_TWRP_2.6.3.0.zip
HD2_TWRP_2.6.1.0.zip
md5: d66519b22d219865d741389013ea034f
HD2_SD_TWRP_2.6.1.0.zip
HD2_TWRP_2.6.0.0.zip
md5: 185e6b34699e4cdb176780695e9e06aa
HD2_SD_TWRP_2.6.0.0.zip
HD2_TWRP_2.5.0.0.zip
md5: 9604cb28b3e91047abdc3a63d5b827df
HD2_SD_TWRP_2.5.0.0.zip
HD2_TWRP_2.4.4.0.zip
md5: b24bdf020b8ea3222c92df0644c88203
HD2_SD_TWRP_2.4.4.0.zip
HD2_TWRP_2.4.0.0_r1.zip
md5: 8bd2b557442c5af73d38f9e7a054b67a
HD2_SD_TWRP_2.4.0.0.r1.zip
HD2_TWRP_2.3.2.3.img
md5: ad8d1909d54c440f9b79eacad31910b9
recovery-twrp-leo-2.0.0RC0.1.img
md5: 6279a726b19a4ff2fccfe592e23b2e48
recovery-twrp-leo-2.0.0RC0.img
md5: e12fc48a863e4a2984d7fcf3b2cad50a
recovery-twrp-leo-1.1.1-3.img
md5: 6198e06b7ca85379e16acde4d9a19752
recovery-twrp-leo-1.1.1-2.img
md5: 52c51eee07c50a928341b22c3e2a60b6
recovery-twrp-leo-1.1.1-1.img
md5: 4801f88e0d2a62b5a1c3d168a4116d0d
recovery-twrp-leo-1.1.1.img
md5: 7fa63b205facf64bd69d805acf34ae8c
recovery-twrp-leo-1.1.0-2.img
md5: 8bd05c6b1e25bd8cf410e308bed23fe5
recovery-twrp-leo-1.1.0.img
md5: 449b06b28f73e996a33e06c047b51b98
Special Thanks to:
---------------------
* Core twrp 2 development team: agrabren, Dees_Troy, ViViDboarder, and AssassinsLament
* Toastcfh – for his underappreciated dedication to the community
* s0up and kevank for their hard work on the web side of things.
* The rest of Team Win: shift, onicrom, netarchy, kevank, myndwire, bigbiff, dkelle4, shinzul, spiicytuna, and eyeballer
* Amon_RA - for his great Recovery
* Koush - for his dedication to the community and ClockworkMod
* For all the help with devices and testing Akmzero, arif-ali, Evil_DevNull, gus6464, Jesusice, Pyrostic, [R], and Rootzwiki
* As always thank you to the Team's supporters and the Android Community.

[22 Dec 2011][RECOVERY] Team Win Recovery Project (twrp) v2.0.0RC0.1
Original OP

FAQ
FAQ from TWRP team is here
Q: Does Rom Manager work with this
A: No
Q: Will you be providing support for Rom Manager
A: Maybe, when I have time, or if Team View release it before me
Q: Does it work with MAGLDR
A: Yes, use AD recovery
Q: Does this mean we cannot easily install ROMs
A: Yes, but the code for that may be added at later date, this is Work In Porgress
Q: Will reboot to Recovery work as normal
A: Yes
Q: Does Off-mode charging still work
A: Yes, same as CWM on cLK. it will charge when off, but pressing the power button while charging will not turn the phone on
Q: I got "failed with error: -1"
A: make sure the recovery size is 5M, anything below that is not supported, You can check this by running adb cat "/proc/mtd | grep recovery"

Changelog
ChangeLog
---------------------
2011-12-22 - v2.0.0RC0.1
Fix issues with wiping data on MTD devices (thanks Dees_Troy)
2011-12-18 - v2.0.0RC0
Initial release of twrp 2
Full GUI touchscreen with buttons and XML engine
Fixed sdcard free space checking
Fixed bugs with MD5 zip file checking
Now check more places for a serial number
Too many fixes versus twrp 1.1.1 to list
2011-10-11 - v1.1.1-3
Fix sd-ext issues (no longer use auto FS, and use ext3)
2011-10-08 - v1.1.1-2
Fix sd-ext restore issue
Fix issue with SD repartition and the send button again
2011-10-08 - v1.1.1
fixed fix permissions bug
fixed md5 checking for zip install
2011-10-07 - v1.1.0-2
Changed the select key from power to call button
2011-10-07 - v1.1.0-1
Changed buttons so that it works with the HD2
HD2 Initial Release
2011-10-05 - v1.1.0
brand new nandroid process with more error checking and supports ext3/ext4 types of devices
sdcard partitioning is available for devices with a sdcard (courtesy of koush from CWM source)
can choose multiple zips before flashing and they will flash in the order chosen
files & folders are sorted case insensitive
added option to sort zips by file date instead of file name
can apply themes and change time zones without rebooting for instant gratification
saved settings will now persist through version changes
added myn's warm theme with color codes courtesy of myn
added option to wipe system, data, and cache with rm -rf during a nandroid restore to maintain existing file system settings like block size
added options for automatic md5 checking of zips
twrp spam off by default which makes nandroids up to 10x faster
2011-08-05 - v1.0.3
Added timezones that should cover everyone
Added twrp spam feature (twrp settings)
Added fix permissions (advanced menu)
Added wipe cache and dalvik into Flash Zip menu
Added copy recovery.log to /sdcard (advanced menu)
Added output spam/no spam to restores
Added mke2s prebuilt to /sbin
Fixed SD-EXT issues, (no partition SD-EXT features yet)
Fixed EFS partition issues
Changed the way we do backups on mtd devices, which should fix any boot partition issues (we suggest making new backups if you have an mtd device, EVO4G,NS,NS4G,etc)
2011-07-31 - v1.0.2
Fixed SD-EXT issues
Added Format SD-EXT into format menu
Removed GAPPS support, CM7 automatically backsup and restores if you already have GAPPS installed. If you don't, just flash GAPPS zip
Fixed issue where when flashing a rom, rebooting brings you back to recovery. Auto reboot after successful flash should work great now!
Rearranged the format menu
2011-07-30 - v1.0.1
Initial release

Since I had Already started with the ports for the Recovery Themes...
This is the Link to New Thread.
Sory for Any Inconvenience this has caused you Arif...

Please Visit New Thread Here...
If you See any New themes that you would like me to Port please feel free to post on the Thread Linked Above...

tobiascrystal said:
No kidding, you are super fast! In your experience would you say that this has anything over cwm that you have learned getting it to work for us?
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
It is customizable and has touchscreen capabilities.

wow very nice new features compared to clockworkmod...
Just installed few minutes ago, as far as I can tell, it seems all is working fine!
I might have a "small" request, is it possible to map the buttons just like in cwm? I didn't like the idea of using the end button that much...
---------- Post added at 01:51 AM ---------- Previous post was at 01:49 AM ----------
Ultimaex said:
It is customizable and has touchscreen capabilities.
Click to expand...
Click to collapse
Not just yet! This is 1.xx version based, the one you're refering with ts capabilities is 2.x based...

Kool... Now users will have a choice for more than one recovery on leo too... Al thanks to you cheers
And button customization would be good... I hate using the end key.. I fearing... My touch screen might get spoilt again ...
Sent from my HTC HD2 using XDA App

Seems to work great. I did a backup and restore and all went well thumbs up
Sent from my HTC Runnymede using XDA App

So right off the bat I'm impressed with the compression....does it allow us to produce our own zips? I'd like to rename my backups based on the rom they backed up instead of just a date/timestamp.

Nice........

Definitely a thing to look in future
Hope all the bugs are resolved soon
EDIT: - Thanked & RATED 5 STAR (All I can do as of now )

i don't understand how can i install this, becouse this is not zip file. Can you help me please

you install through adb. if you dont know what that is, do a search. there are many FAQ's about it. I would recommend doing plenty of research on it before diving right in.

if someone can do some pictures for me that would be great, as I don't have a camera, or a second phone which has a good quality camera
thanks

How's about battery charging, like clk?

huhjun said:
How's about battery charging, like clk?
Click to expand...
Click to collapse
It's the same as CWM
Edit: Added to FAQ

arif-ali said:
if someone can do some pictures for me that would be great, as I don't have a camera, or a second phone which has a good quality camera
thanks
Click to expand...
Click to collapse
Here you go with some phot... Not so high quality though... If you need better.. Tell me I will upload photos taken from my handy cam ... And what vabout changing end call button to call button
http://db.tt/afg0Szat
Sent from my HTC HD2 using XDA App

i got "failed with error: -1"

[TOUCHCOVERY] 4EXT Recovery Touch v1.0.0.6 RC 2

Proudly presenting:
4EXT Recovery Touch
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
brand new user interface: "4EXT UI"
touchscreen only
extremely fast
much more useful features than the already feature-packed 4EXT Recovery Classic v2.2.7 RC5 (see 2nd post)
optionally save space by configuring recovery to exclude /cache from backups
you can configure recovery to save even more space by excluding dalvik-cache from backups
calculates real space needed to complete a backup to save you from troubles
detects your local time zone
-> correct time is used for backups you start from within recovery
allows you to change md5sum check behaviour
displays and updates your current battery level in real time
scrollable texthistory (drag down the statusbar)
built-in interactivity (yes/no questions) for updater-scripts
built-in screenshot functionality
extensive theming capabilities!
nearly ALL YOU SEE is changeable.
"worker bar": create your own custom animations, there are (nearly) no limits! Use any shapes/sizes/animations et.c.
extra low cpu needed for that: absolutely no negative impact on backup/restore speed.
async UI rendering for optimal performance for the "heavy tasks" like backup/restore
backups even faster than with usual recoveries.
.. explore the new interface to see more
includes all features of 4EXT Recovery Classic
​
INFO: ​
For App and Rom devs:​
Make use of the Recovery Interface Api provided by the (free and paid) 4EXT Recovery Apps to push updates/mods/addons for auto installation.
Very easy to use and to integrate into Apps or even shell scripts.
Please check 3rd post.​
Info regarding 4EXT Recovery Touch and its yesno feature, or any interactive installer scripts you might already use, please see 3rd post.​
​
Themes for 4EXT Recovery Touch:
Official 4EXT Recovery Themes Index & Discussion Thread
​
Download​
All downloads are available through 4EXT Recovery Updater.
It's free, no ads, no tracking, no nothing, don't worry
..and of course via 4EXT Recovery Control
This ensures that your downloads are ok by automatically verifying md5sums and that known issues and changelogs are easily accessible
When you install or download a recovery via the app it makes sure that your recovery config is correctly set up.
It allows to automatically setup your time zone for recovery.
You can use it to get notified about updates regarding your recovery version
You can configure it to get notified in case any critical bugs have been discovered of the recovery version you currently have installed.
It allows me to update known issues/changelogs immediately and to quickly pull a newly released version if there were reports about critical bugs
You can also use it to just download a recovery.zip containing the image. The download will be automatically verified for correct md5sums!
​
By default the app also saves the recovery.img you flash on your sdcard,
so you can use it to flash the recovery via fastboot in case you need to do that one day.
If you somehow lost those files, there's a direct download for a version you can flash via fastboot.
4EXT Recovery Control
Free version: Recovery Updater
Fully featured: Recovery Control
For a list of its many features, visit www.4ext.net
Some examples :
Very easy to use, but also includes an extensive set of features available via "advanced mode"
Comfortable configure all settings of recovery
Calculate the space needed to create a new full or advanced backup
So you can make sure the backup will succeed before even rebooting into recovery.
Advanced Backups: While you are selecting / deselecting partitions, it will display and update the currently needed space to complete that custom backup set.​
Identifies and adds your romname so you don't need to type so much when chosing a meaningful name for your backup
When you restore a backup, the app does the md5sum check instead of the recovery
This ensures that you know whether the restore process will succeed before even rebooting into recovery​
Flash as many zip files you want in one go
Automatically calculate and display the md5sums of all zip files you are going to flash
Check your backups' health to ensure they will restore later when you need them, by verifying their md5sums!
Optionally, but highly not recommended:
If md5sums don't match but you really need that backup badly, you might want to restore it anyway.
You can you this app to fix the md5sums of a given backup​
As an example, the following is possible to do in just one session:
Restore a backup, set to create a backup / advanced backup before the restore,
format all partitions with a file system of your choice before the restore process starts,
flash additional zip files afterwards, fix permissions and select to stay inside recovery or to reboot automatically once all actions are complete.​
Much, much more! See www.4ext.net
Big thanks to craacK for a lot of great icons!
​
Thanks:​
Big thanks to DolphiCom for all the graphics, the worker bar and a whole lot of great ideas and to the many great testers who spent all day/night testing, reporting bugs, making suggestions, helping with decisions:
Jotha, craacK, Patrics83, Euphorie, Mike1986, Whiskey103, ptr_hamilton, Lizard, TheUntouchable
Big thanks to Jotha and Whiskey103 for testing the themes features creating and their first themes for 4EXT Recovery Touch.
Also Big thanks to all the donators to 4EXT Recovery and everyone who has bought 4EXT Recovery Control! Without you I wouldn't be able to spend as much time with the project:
SO A HUGE THANK YOU!​
FRANKIE-BOY, SYRAKUS, FISHA21, ZJXPOT, ZEEKIZ, A USER, PHILOS64, STEVEATHOME, PREACHER65, BEN_PYETT, HAWST, ANIT77, ULTRA DROID, PTR_HAMILTON, BEANBEAN50, SEBASTIAAN15 and LOVEBOATCAPTAIN
Of course BIG THANKS to KOUSH for ClockworkModRecovery!
Without him, 4EXT Recovery wouldn't exist!​
Thanks a lot to the following users for initial testing for specific devices :
PTR_HAMILTON, SEBASTIAAN15, THEUNTOUCHABLE, BMONSTER, ANDREIGHERGHE, PRESTON74, MADKAI, YASIR, PLAYPETEPP
IPERZAMPEM0, THESHAWTY, JBBANDOS, GREGFERNS and INCREDULOUS
Special thanks to Invasion2 and Stlouie65 for spending at least 10 hours of their time helping me debug a really nasty issue on the myTouch 4G!
Also thanks for obtaining calibration values for the touchscreen:
Wolfepakt
Jaibar
Jayallen1980
Stlouie65
Invasion2
PacerguyDon
Ben_Pyett
Dargocitfer
Darknessrise1234
Lizard
Azazel71
​Kernel: official HTC kernel sources.

Features of 4EXT Recovery Classic:
(Use 4EXT Recovery Control or Recovery Updater for complete Changelogs and Known issues!)
not all features may be relevant for all devices
Displays additional information:
Identifies your current rom and displays its name
Current filesystems on your partitions
Free space remaining of all of your volumes
Current battery charge level
Backup | Restore:
Correctly calculates free space needed to complete a backup ( version > 2.2.6 RC4 )
Tar backups (can be switched on or off)
Complete CWMR5 compatibility
All Backups you create will be named after your currently installed Rom for easier identification.
Never unwillingly get "downgraded" to EXT3 again
Always restores backups using the file systems you HAD on your partitions at the time of creation!
-> all partitions formatted with ext4 at that time, will be restored to ext4. The same is true for ext3.​
You can manually change any existing Backup to ext4 or ext3
-> so that after a restore, all partitions and up with the file system you wanted!​
Advanced Backup: backup only a single partition
Convert any of your partitions to EXT4 or EXT3 without data loss.
Formatting:
When you wipe or format it will always use the same file system you currently have.
-> but you can change that​
When you format ext4 it will always create an aligned file system
Correctly identifies unformatted sd-ext partitions
-> if it finds one it displays a warning and suggests you may format them by visiting the 4EXT menu​
Filesystem check and repair option in advanced menu
Partitioning:
Alignment check of your partitions
Full support for up to 2 sd-ext partitions + swap (Backup/restore/format/convert, fsck, et.c.)
(RE-) Partition your sdcard for sd-ext without removing your fat32 partition.
All partitions created with 4EXTRecovery will be perfectly aligned to 4k
Installing:
Integrated md5sum checking option
Menus:
Most popular menu items rearranged
Format menu
Power Menu + option to reboot into bootloader
Changed Advanced Restore: first select what you want to restore, then select the backup
-> Useful for restoring from "Advanced Backups"​
4ext.prop:
Configuration file on your sdcard where you can set options to be used by 4EXTRecovery
Change all settings conveniently with 4EXT Recovery Control
Many more options to come
Share your settings / themes by packing your config into a flashable theme
Other stuff:
USB Storage Autostart (must be switched on)
Mount usb storage exposes all partitions on your sdcard to the os (not just fat32)
-> you could even partition your sdcard from your PC while connected via USB​
Switch haptic feedback on/off
Button backlights
​

Recovery Interface Api for Apps and Scripts​
Both: free and paid 4EXT apps now provide a very easy to use interface you can use to access 4EXT Recovery from within your shell scripts or apps.
Features:
wipe cache
wipe dalvik
wipe data / factory reset
install multiple zips at once
backup
If you are interested, please download this zip file with examples​
How to make use of 4EXT Recovery Touch from within updater-scripts:​
Since Beta 1.0.0.3 Beta 4 you can do the following:
identify whether the user is running 4EXT Recovery Touch or not (to use or not to use the following commands)
make use of the native yes/no dialogue (confirm / cancel buttons)
prevent recovery from redrawing the screen ( in case you need to use your own 3rd party interactive binary )
​
To identify 4EXT Recovery Touch:
Code:
if getprop("ext.edition") == "ng" then
<your code>
endif;
To use the native confirm dialogues:
Code:
ui_print("4ext: show_yesno"); # <-- recovery will pause your script and display "yes / no" buttons.
run_program("/sbin/sleep", "2"); # <-- for safety since the above is executed asynchronous
#check the return value by calling:
if getprop("ext.confirm") == "yes" then
<yourcode>
endif;
To prevent recovery from redrawing the screen ( if you want to use an external binary that needs to occupy the screen and get the focus )
Code:
ui_print("4ext: disable_scrn_update");
# don't forget to enable it again after your yesno binary or graphical installer is finished, by calling:
ui_print("4ext: enable_scrn_update"); #otherwise the recovery will appear to be frozen as it won't update the screen anymore.

I have the full version 4EXT. You make great job.
Thanks.

Am looking forward to checking out the hard work Just reading over the change log,have you managed to include an option for Wipe_Efs script?

Amazing!
Wow, simply amazing!! A touch based recovery. Cant believe it.
Dont really love the new Colors, but i trust you, that theming will be back soon.
Then we will have nice to control and beautiful looking recovery!
Have the paid version btw.

Awesome! Getting it right now!
---------- Post added at 03:51 PM ---------- Previous post was at 03:33 PM ----------
weird Recovery control didn't want to update I had to go through the my apps on the market vs the actual page for 4ext recovery control. weird, but i got it working all right!

Thank you all very much
IharpI said:
Wow, simply amazing!! A touch based recovery. Cant believe it.
Dont really love the new Colors, but i trust you, that theming will be back soon.
Then we will have nice to control and beautiful looking recovery!
Have the paid version btw.
Click to expand...
Click to collapse
Thanks
It's already completely customizable, just not via the app yet. This will be added of course as soon as possible!
In the meantime you can change all the colours by editing the file theme.prop on your sdcard inside the folder 4ext.
There will also be complete themes shortly. I think the first ones for the display resolution of your device are already available..
Need to gather the links..

Wow max, wow. This is truly epic. Awesome work buddy
Sent from my HTC Desire S using Tapatalk

I have the paid version too

Just bought the Market version Any word about the EFS wipe integration?
Edit: just gave this a try. The UI is very intuitive and works well! If I may give one suggestion, perhaps the confirmation messages that slide down from the top could show up a bit faster.

c00ller said:
Just bought the Market version Any word about the EFS wipe integration?
Click to expand...
Click to collapse
It's already there; check the wipe menu in the recovery section
Sent from my HTC Vision using XDA App

Congrats on your new release Madmaxx82. This new UI is top shelf. Love it!
thx for all your hard work on this.....

OriginalGabriel said:
It's already there; check the wipe menu in the recovery section
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I would actually prefer it in the wipe menu in recovery and not from within the rom app.

Thanks for the new 4EXT recovery version, absolutely love the new UI. 4EXT has been my go to recovery since it has been released. Think its time for me to make the jump to the paid version.

Thank you all soo much for that amazing feedback
Need to get some sleep now, but will answer any questions/posts tomorrow!

All I can say is "wow" this is mind blastingly awesome!
Sent from my HTC Vision using xda premium

Mind = Blown
I've been using 4EXT for quite a while, but this update is amazing! Thank you for all the hard work that you put into this recovery.
Sent from R2's G2

Just flashed the new touch version and I have to say that you did a great job. Can't wait to see what future releases bring us.

I'll be jumping on this recovery bandwagon soon, looks too good to pass up. She's ICS ready correct?
Sent from my T-mobile G2 using Tapatalk

[RECOVERY][Xperia S] DooMRecovery (CWM-based recovery){GB}[Rel:v05]{Dt:21/MAY}

------[ UPDATE ]-------
DooMRecovery v05 released! changelog here
------[ UPDATE ]-------
DooMRecovery for Sony Xperia S is based on ClockworkMod recovery source (GB 5.0.2.x).
Credits and special thanks to Koush and everyone else involved in Cyanogenmod project!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(the video is a bit older one from my Xperia Play but gives u an idea how it will work on device)​
[ info ]
firstly i want to thank all the users of this community who donated the device to me! thanks everyone!
so friends i present to u DooMRecovery! its based on CWM 5.0.2.x sources... i have done some additions which i feel makes the recovery a lot smarter... i am still working on the recovery and will be actively maintaining it, so there will be updates as and when i get things working/add new features...
Touch capabilities are added by my teammate (Team UtterChaos) Napstar....
For posting BUGS/issues related to my kernel post them in kernel thread:
http://forum.xda-developers.com/showthread.php?t=1557452
For posting BUGS/issues related to my recovery post them in recovery thread:
http://forum.xda-developers.com/showthread.php?t=1594828
For general discussion regarding my kernel/recovery OR if u want to request for new features, post them in discussion thread:
http://forum.xda-developers.com/showthread.php?t=1596041
RECOVERY IS CURRENTLY AVAILABLE AS PART OF DooMKernel & Advanced Stock Kernel
THE RECOVERY IS STILL WORK IN PROGRESS AND I AM WORKING TO IMPROVE IT!!!
THE RECOVERY IS COMPATIBLE WITH ROM MANAGER!
Start the ROM Manager APP
Click on Menu
Select Manual Flash Override
Click OK at the next prompt
Confirm phone model as "LT26i"
Confirm version as "ClockworkMod 3.x+"
Click OK at the next prompt
thats it ROM Manager is now configured to use this recovery
[ disabled for this device ]
Advanced Menu -> Partition SDcard
[ credits / special thanks ]
Koush - for the brilliant work & coding on CWM recovery
Napstar - for doing most of the work on Touch capabilities for CWM recovery (not fully implemented it)
Frosty666 for the Vibration triggers
FreeXperia Team (Bin4ry & jerpelea) - for tooo many things!!
[ features ]
added a new menu "More Options"
AROMA File Manager is NOW directly accessible via this new menu
current ROM details can be retrieved via this new menu
fixed some internal sdcard (/emmc) related bugs
fixed advanced backup option
fixed this bug
fixed display of "build timestamp" and battery level
some more changes in font color to make it more readable
replaced background with my old favorite (thanks to Soheil)
implemented detection of internal sdcard as /emmc (if required)
slight changes in font color to make it more readable
now features larger XHDPI fonts (thanks to koush)
replaced the bottom "on-screen navigation buttons" with bigger buttons
fixed SDCARD mounting to PC as mass-storage
now recovery can backup/restore kernels and users can flash kernels (kernel.elf)
FULL TOUCH interface
swipe gesture support!!! - the hotspot for this is across full screen
swipe left to GO BACK/ Scroll UP
swipe right to Scroll Down
Honeycomb themed
haptic feedback
incase the recovery "hangs" or incase some unwanted event starts u can press the POWER button to restart the recovery (the device wont reboot, only recovery will restart)
shows current time (time when the recovery was entered/started)
shows the current battery percentage (CURRENTLY BUGGY)
uses new Roboto FONT (from latest CWM repo)
new "select update.zip menu": it will give u a new option - "show file details" - which will display the size (in bytes) and the MD5SUM of the selected file
when any update.zip is selected its complete file name will now be displayed (right at the top) and full path to that file will be printed before flashing begins
added prompt to display the "backup folder name" when user starts restoring a backup
added a warning and option to abort backup if space on sdcard is < 150 MB
removed Wipe cache partition from main menu (u can format /cache from "Mounts & Storage" menu)
removed those tons of "No"s
add confirmation to "backup" option in Nandroid menu... it used to keep getting pressed by mistake and start making backups immediately... now it will ask u before starting backup
replaced "reboot system now" with new menu "reboot options"... now with this new menu u can:
reboot sytem
reboot into recovery
reboot into fastboot mode
Power Off
added "advanced backup" menu (based on amit.bagaria implementations for his CF-Root kernel for SGS-SL)
now u can selectively choose which partitions to backup
its like a toggle
once u have finished choosing which partitions u want just click on "perform backup" and only those partitions will be backed up!!!
revamped layout for recovery menu (to improve navigation) [renamed few options and changed their order]
changed "wipe data/factory reset" option to just "factory reset", and detailed the partitions which will be wiped
changed text of most menus to fit the new honeycomb inspired design
the Nandroid backups & restore now show/displays which files were used to restore/what the backup is called (folder name)
[ known bugs ]
all backups are done get time stamp of year 1970 dont know why this happens but i am trying to sort it out some how
the recovery sometimes hangs - just press power button it will restart recovery without rebooting device
there are some graphics glitches
backups created with v01 recovery might give errors while restoring using v02 recovery... work around is posted here
if you encounter any other bugs/issues DO LET ME KNOW ASAP by posting them in THIS THREAD
[ requirements ]
UNLOCKED BOOTLOADER
fastboot binaries
[ how to install? ]
The recovery in integrated into the kernel! so when u flash the kernel it will contain the recovery!
[ how to enter recovery? ]
the recovery entry key is VOLUME UP button... so when you see the bootlogo watch out for the following notification which will tell u when u press the entry key (VOL UP):
the LED will turn BLUE
the device will vibrate for short duration
the bottom strip will be illuminated
if u press the entry key within this timeframe of the notifications (3 seconds) the device will enter into recovery
[ how to use recovery? ]
hardware keys
VOL UP/VOL DOWN key to move Up/Down in menu
HOME key to SELECT item
BACK key to GO BACK
OR
On-screen Navigation buttons
OR
Full Touch capibility!
[ donations ]
if u feel that this work has helped u OR u think that the work i put into making this is worthy of donations, then click on the following link for buying me some coffee/beer/etc
PAYPAL DONATION LINK
ENJOY!!

DooMRecovery v01 released!
details, changelog at first post!!!
DooMRecovery is currently available ONLY as a part of DooMKernel!
please test out and let me know if u have any bugs/issues in THIS THREAD...
for general discussions use the following thread:
http://forum.xda-developers.com/showthread.php?t=1596041

I have just made an very old recovery backup as it says
Current Time:
12:03:27 GMT Mon 23 Feb 1970
but it feels good to have recory backup back again, thanks.

Hi Doom,
One quick question - is it possible to disable vibration in the recovery?

harfot said:
I have just made an very old recovery backup as it says
Current Time:
12:03:27 GMT Mon 23 Feb 1970
but it feels good to have recory backup back again, thanks.
Click to expand...
Click to collapse
ya i know
its like back to the future
kazuni said:
Hi Doom,
One quick question - is it possible to disable vibration in the recovery?
Click to expand...
Click to collapse
nope i have implemented it as a feature so its easier to check if the "touch response" was registered...

@DooMLoRD
Have you considered to get your CWM based recovery actually on CWM ROM Manager?
Auto Installation would be sweet for something like this for allready rooted users. and much easier to update aswell.
Might be a consideration. I would certainly donate for that to happen. ;D

Just flashed this. Runs good, su works as expected, overclocking is good to have, but I'll probably stick to default or even underclock a bit.
Sent from my LT26i using XDA
Edit: wrong thread, derp.

How about make console runs in recovery mode? With console, we can browse and delete apps in recovery!
The OpenRecovery for Motorola Milestone has this feature!
Thank!

juzz|NOR said:
@DooMLoRD
Have you considered to get your CWM based recovery actually on CWM ROM Manager?
Auto Installation would be sweet for something like this for allready rooted users. and much easier to update aswell.
Might be a consideration. I would certainly donate for that to happen. ;D
Click to expand...
Click to collapse
we dont have dedicated recovery partition... so we cant use any app to flash it...
also only officially supported devices get official CWM from ROM Manager (its limited only to releases by Koush)...
K900 said:
Just flashed this. Runs good, su works as expected, overclocking is good to have, but I'll probably stick to default or even underclock a bit.
Sent from my LT26i using XDA
Edit: wrong thread, derp.
Click to expand...
Click to collapse
yes even i underclock to max 1Ghz
keunhuvac said:
How about make console runs in recovery mode? With console, we can browse and delete apps in recovery!
The OpenRecovery for Motorola Milestone has this feature!
Thank!
Click to expand...
Click to collapse
interesting can u share some details?
PLEASE KEEP THIS THREAD FOR REPORTING ISSUES/BUGS
FOR GENERAL DISCUSSION/FEATURE REQUEST USE THIS THREAD

DooMLoRD said:
we dont have dedicated recovery partition... so we cant use any app to flash it...
also only officially supported devices get official CWM from ROM Manager (its limited only to releases by Koush)...
Click to expand...
Click to collapse
Something I came up with the other day: maybe put the recovery fs in a separate file? Then we can change the ramdisk to either load android normally or mount the recovery image like a ramdisk and boot it. This way any kernel (as long as it supports this method) can coexist with any recovery. Also means we could probably use recovery to flash kernels because it runs from RAM so there's no risk of breaking the recovery.
Sent from my Transformer TF101 using XDA

__ delete

K900 said:
Something I came up with the other day: maybe put the recovery fs in a separate file? Then we can change the ramdisk to either load android normally or mount the recovery image like a ramdisk and boot it. This way any kernel (as long as it supports this method) can coexist with any recovery. Also means we could probably use recovery to flash kernels because it runs from RAM so there's no risk of breaking the recovery.
Sent from my Transformer TF101 using XDA
Click to expand...
Click to collapse
we already did those things for X10, ARC... point is where will u keep the recovery file? if u keep it on /system then its not a true recovery as formatting /system will remove it... and in case of "bad flash" u will be left with no access to recovery...
so we have done the next best thing... integrated recovery into kernel... we use this for all xperia devices...

If I install the recovery with ROM Manager, also install automatically the Kernel?
Are there any requirements to install it?
Thank you!!

treoking said:
If I install the recovery with ROM Manager, also install automatically the Kernel?
Are there any requirements to install it?
Thank you!!
Click to expand...
Click to collapse
installing recovery from ROM Manager is ONLY supported for devices which have dedicated recovery partition and the ones which officially supported by Koush...
only way to get recovery is to flash kernel containing recovery via fastboot

DooMLoRD said:
we already did those things for X10, ARC... point is where will u keep the recovery file? if u keep it on /system then its not a true recovery as formatting /system will remove it... and in case of "bad flash" u will be left with no access to recovery...
so we have done the next best thing... integrated recovery into kernel... we use this for all xperia devices...
Click to expand...
Click to collapse
The idea is to keep the recovery on /boot, but make it possible to run a custom image from /system.
Sent from my Transformer TF101 using XDA

K900 said:
The idea is to keep the recovery on /boot, but make it possible to run a custom image from /system.
Sent from my Transformer TF101 using XDA
Click to expand...
Click to collapse
/boot is the kernel partition, which is not accessible... so essentially its going to be in kernel ramdisk

DooMLoRD said:
/boot is the kernel partition, which is not accessible... so essentially its going to be in kernel ramdisk
Click to expand...
Click to collapse
That's what I meant. I still getting used to the Xperias' internals after three years of HTC/Samsung
Sent from my Transformer TF101 using XDA

K900 said:
That's what I meant. I still getting used to the Xperias' internals after three years of HTC/Samsung
Sent from my Transformer TF101 using XDA
Click to expand...
Click to collapse
hehe...
Xperia are a bit of a pain in the a**...
anyways u all will be happy to know that we can finally flash kernels from recovery/OS to boot partition of this device (Xperia S)...
i have tested and it works well!!

Creating a new file called .hidenandroidprogress in the clockworkmod folder should speed up the nandroid backups eg:
/sdcard/clockworkmod/.hidenandroidprogress
-smc

DooMLoRD said:
hehe...
Xperia are a bit of a pain in the a**...
anyways u all will be happy to know that we can finally flash kernels from recovery/OS to boot partition of this device (Xperia S)...
i have tested and it works well!!
Click to expand...
Click to collapse
Great news Also HTCs can sometimes be even more pain, especially locked ones
Sent from my Transformer TF101 using XDA

[Recovery][a5][CWM Advanced Edition] PhilZ Touch Recovery [v6.48.4] [22/7/2014]

* * * * * * * * * * * * * * * * * * * * * * * * *
PhilZ Touch 6 Recovery
CWM Advanced Edition 6.x
* * * * * * * * * * * * * * * * * * * * * * * * *
​
Support clockworkmod developement
​
>> Downloads and How to Install in POST 2<<​>> Special Features Guide in POST 3<<​>> Changelogs in POST 4<<​
Main thread here: http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch Features: Read POST 2 for instructions to use special functions like aroma and ors support
Main menu and PhilZ Settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GUI Preferences: all is applied live (no reboot). Up to 14 menu height settings, scroll sensitivity, touch accuracy...
27 color settings + 5 alpha transparency levels for every GUI element
Change background image with a custom png (of your device resolution), a solid color (27 presets) or revert to original cwm image
User configurable touch gestures (feel free to request for new actions)
Setup your time-zone + 30mn offset, super wipe option to install a new ROM
Backup and Restore any partition in a complete freedom, include modem (.img + .bin) and efs (.img + .tar)
Custom backups can also be restored by original CWM Advanced Restore Menu
TWRP Backup and Restore Support + md5 + single/multivolume format
Support multi-cpu compression, md5 check toggle and custom .android_secure path
Choose ors backup volume target
Flash multiple zip files in a raw
Aroma File Manager + Terminal Emulator: launch with a gesture action (double tap is default)
Full Wipe to Install a new ROM (sdcard is preserved)
Free Browse Mode to install zip files: select a default folder to start with and browse up to the root
Enjoy, and do not hesitate to post feedbacks and comments
Credits
Koush for having created and maintaining cwm
Cyanogenmod for making all this possible
Tallustus from Team Skyfire for his great support over IRC: MAJOR CREDITS
Dees_Troy from TWRP team for pigz source and many great ideas in their recovery + source for backups compatibility
Patrics83 and HTC One X xda community for their big help in debugging the touch events input code
Chenglu for his great unpack / repack tool
kbc-developers for the base semi-touch code and much more
[email protected] for his great job / support
McKael for his invaluable support in fixing for Nexus 4
sk8erwitskil for his recovery source, a great place to start learning
amarullz for bringing Aroma File Manager
shoe63 for his testing and great help in porting to the N7000
Tectas and zscomp for their great support in porting to i9300, but not forgetting rulala and störte
wanam for compiling kernels for N71xx and i317M to fix boot delay for custom kernels
dr.ketan for his precious help in porting to the N7000 & N7100 (I don't own one) and all the support in threads
The_Steph: for his major help in debugging for n7100.
a3955269 for providing an updated port of TWRP to i9100
adishakthi, ttav and kolmanb for the time they took to debug touch UI for tablets (N8xxx/P31xx)
jeboo for all his feedback about fixing bootloops...
utkanos for his great and kind support over IRC
gweedo767 @ #Koush for sharing his touch code source (not used)
myfluxi for his xxRecovery source in fixing dual usb mount
RM57380 for the tip to grab pictures: fb2png
Chainfire for his support (stock recovery flash) and all his work for the Android community
superatmos and Dharam_Maniar for their great guides on unpacking/building custom kernels
XDA:DevDB Information
PhilZ Touch Recovery, Tool/Utility for the HTC Desire 816
Contributors
v_superuser, Grarak
Version Information
Status: Beta
Beta Release Date: 2014-07-22
Created 2014-07-22
Last Updated 2014-07-23

Downloads and Instructions
Downloads​
Get the latest recovery image from here -
Android File Host - http://www.androidfilehost.com/?w=files&flid=16920
Goo.im - https://goo.im/devs/philz_touch/CWM_Advanced_Edition/a5/
How To Install​
Run these commands in fastboot -
Code:
fastboot flash recovery recovery.img
For support, join support channel on IRC, #htca5​

Reserved
PhilZ Touch 6 Guide!​It is based on Koush clockworkmod 6.x to which I added many features and a full reliable touch interface
Version 5 brings mainly a true touch and scroll interface with a much more optimized and portable touch source
How to select your .android_secure path
In Custom Backup and Restore operations, you can select the target/source for android.secure or disable it
In stock backup/restore operations, include those started with ROM Manager, you can also force a target/source for .android_secure
basically, recovery will check first external storage for a .android_secure folder. If it doesn't find it, it will look in internal storage
If you want for example .android_secure to be in internal sd, just delete .android_secure folder from external sd and ensure there is a .android_secure folder in internal sd
for external sd, just ensure there is a .android_secure folder in it. It will be chosen what ever is the internal sd state
Custom Backup and Restore menu
This is one of the most powerful features of this recovery.
It is made completely open source code, built from sratch. Just keep credits headers and give proper credit if you use them
You can select which partitions you want to backup or restore
You can choose your .android_secure source and target or even disable it
You can set it to reboot directly after job is done
backups will go under the folder clockworkmod/custom_backup
TWRP backups go under stock TWRP/BACKUPS/device_id folder and will be automatically recognized by TWRP
Custom Restore Menu allows you to restore from any of the stock clockworkmod/backup folder, the custom_backup or the TWRP backups
If your backup folder was moved to /sdcard/0/clockworkmod after installing Android 4.2, you can go through the Custom Restore process. When it prompts you to browse sdcards, it should show an additional menu to offer you to browse Android 4.2 folder (/sdcard/0). The additional menu is shown only if recovery detects a /sdcard/0/clockworkmod folder on /data/media devices
efs is backed up under clockworkmod/custom_backup/.efs_backup
modem.bin files can be named any_thing.bin and must go under clockworkmod/custom_backup/.modem_bin
if you enable compression and disable md5, your backups will no more be recognized by stock cwm builds. Otherwise, all stock and custom backups are backward compatible with stock cwm (except special partitions like preload, recovery, modem and efs which stock cwm doesn't support)
Open Recovery Script Support (ORS): revised and adapted from original sk8erwitskil source
On start, recovery looks automatically for /cache/recovery/openrecoveryscript installed by goomanager or any tasker. If it finds it, it is run and phone will reboot
You can also add custom ors scripts you edit your self:
When pressing the ors menu, it will look at default locations for your custom scripts:
clockworkmod/ors first in external_sd, then in internal sd. Put your custom scripts there with file extension .ors
That way you can access your jobs (flash, wipe, backup, restore...) instantly
If no scripts are found in default folder, you get option to browse both sdcards for a custom location
To learn how to write ors scripts to automate your backup/restore/wipe/flash tasks, read here, it is very easy: http://wiki.rootzwiki.com/OpenRecoveryScript
Give Goomanager a try
All backup and restore options are supported except special partitions 1, 2 and 3 (could add modem, efs and preload linked to them later)
/preload will be included with /system if you enabled the /preload option in Misc Nandroid Settings
you have an extra here: you can set the target volume for ors backups under Misc Nandroid Settings menu
Aroma File Manager Support *Adapted from amarullz and sk8erwitskil
You get here the possibility to browse your phone with root access in a friendly GUI file browser, while being in recovery
You even now get a terminal emulator to run in recovery
Download Aroma File Manager from its Home Page
Get the 1.80 version and name the file aromafm.zip
Put the aromafm.zip in clockworkmod/.aromafm/aromafm.zip in external or internal sdcards
In recovery, tap the Aroma File Manager menu or double tap any part of the screen outside menus
It will launch the file manager automatically
Double tap gesture linked to Aroma File Manager can be altered in the GUI Settings menu
Touch GUI Preferences:
This is another unique feature of this recovery and is built from scratch
You can toggle through 4 touch modes:
Full Touch: menus are validated by touching them. I added extra checks to make it robust to validation by error while scrolling. After scrolling, your first touch will only highlight touched menu instead of validate it. If a delay of 1 sec passed, it will validate immeadiately on touch
Double Tap: menus are highlighted on first touch. To validate action, you need to double tap the same menu
Semi Touch: the classic semi-touch interface I enhanced. Menus are selected/highlighted on first touch. You can scroll by swiping up/down, but no validation on touch.
Disable Touch: touch code completely disabled. You have all gui options left, but only hardware keys
When Full Touch mode is selected, it will automatically set recommended menu height, touch accuracy and scroll sensitivity. You can alter them later if you want
Scroll sensitivity controls scrolling on swipe up/down. Lower values are the most sensitive. Adjust this based on selected menu height
Touch accuracy: increase it if your touch gestures are not well accounted for
Config files are saved in /data/philz-touch/philz-touch_5.ini file.
You can do a backup of your settings file, it will go under /sdcard/clockworkmod/philz-touch.ini.bak
You can choose to be prompted to restore your settings whenever they are wiped while you have a backup. You can also set recovery to auto-restore them when needed. This check is done when you reboot to main system from within recovery
There are many gesture actions that you can setup at your wish (some default actions are setup by default)
Long press/move is the bad equivalent to a long press gesture action: just that after one sec of touch, slightly move your finger or change the pressure surface without actually lifting it
Your screen should auto-dim automatically after one minute and turn off after 3 mn. You can change those time settings. Just touch the screen to reset brightness and turn it on
All GUI parts can be customized: menu hight, text colors, menu colors, selection colors, background color and icon, menu seprators, battery and clock, header text...
To setup a custom background image: put a png image with your device resolution in a folder clockworkmod/custom_res
You can take screen shots from recovery display by the slide left gesture (change it at your wish). Pics captures will go under clockworkmod/screen_shots folder. External storage will be always used first. If no external storage is found, internal storage is used. You can take up to 999 pics before it resets to 1
Setup Free Browse Mode and Multi-zip Installer:
Free Browse Mode:
You can setup a default folder from where the Install Zip menu will start
From within your set default folder, you can now browse backward up to the root file system to install a zip file
Multi-zip Installer menu:
Lets you select multiple zip files to flash at the same time
The zip files must go into a subfolder under: "clockworkmod/multi_flash"
At least one subfolder with your zip files must be created. You can create as many subfolders as you want
exp: clockworkmod/multi_flash/NEAT_ROM_files
Easy Log View and Pause on Logs:
In Easy Log View mode, your logs will have a smaller size to better fit the screen. This will be completely revised in upcoming v5 though
Pause on Logs: when enabled, after flashing a zip file or doing a nandroid job, you will be prompted for a key to return to menu display. That way, logs are kept in full screen. Obviously, no pause will be performed on boot scripts and multi-zip operations

Full Change History
6.48.4 (06.07.2014)
- merge multi stage install packages support from AOSP
- CWM 6.0.5.0
6.48.1 (30.06.2014)
- add option to directly parse time_daemon data files
- refresh current time in menu header after time daemon fixes
- fix first passkey prompt screen did not show proper background under some circumstances
- libtouch_gui 1.30
6.47.7 (25.06.2014)
- preserve background icon user settings after sideload, install zip and wipe actions
- use real fstype instead of auto in /etc/fstab when converting between ext4 <-> f2fs using extra.fstab
- libtouch_gui 1.29
- LG G2 variants: enable performance mode in recovery (device tree)
- HTC One Mini (m4): enable f2fs and exfat kernel support
- Galaxy S5 LTE (klte): enable backup/restore of /efs, /modemst1 and /modemst2 partitions
6.47.6 (24.06.2014)
- recovery lock: support use of virtual / capacitive keys as pass key
- libtouch_gui 1.28
6.47.4 (23.06.2014)
- fix adb was disabled when no recovery lock passkey was setup
- Galaxy S3 D2 variants: enable f2fs support
6.47.3 (20.06.2014)
- add recovery lock with passkey on start
- better extra partitions support in custom nandroid operations
- fix segfault during shell nandroid backup/restore commands
- enable progress display during "adb shell nandroid backup/restore" commands
- enhance and fix bugs of progress display during install/nandroid... operations
- nandroid restore: fix progress bar animation when md5 verify is enabled
- nandroid md5: fix progress bar was not reset for each file
- nandroid md5: fix .android_secure md5 sum was never generated or checked
this could cause md5 check to fail under some circumstances
- limit logging to console in adb shell nandroid and mount commands
- fix detection of real fstype (pointer to in the scope char array bug)
- merge: "Only chmod backup/blobs directory if it exists"
- merge: "Enable cmdline nandroid backup of vold volumes"
- disable useless sd-ext warnings and errors
- merge loki updates
- f2fs <-> ext4 conversion: support fs_options2 through extra.fstab before dropping to bare minimal options
- clean up code
- libtouch_gui 1.26
6.43.8 (02.06.2014)
- fix recursive path creation bug for /data/media/0
- f2fs: do not try f2fs recovery.fstab mount options on an ext4 partition
- f2fs: do not redefine default recovery ext4 mount options when migrating from an f2fs recovery.fstab
- f2fs: error message when converting unsupported file systems
- fix Galaxy Mega variant background resolution
6.43.5 (01.06.2014)
- default to /data/media/0 unless we define BOARD_HAS_NO_MULTIUSER_SUPPORT
- use lstat to check if file exists
6.43.4 (01.06.2014)
- fix text print colour could persist after md5 check
6.43.3 (31.05.2014)
- fix f2fs conversion of /data on /data/media devices
- allow ext4 <-> f2fs backup data migration in nandroid
- cleanup code
6.43.0 (30.05.2014)
- nandroid backup: fix 'media' exception:
In CWM, a bug present from the begining was preventing any path/file named media from backup on /data/media devices
This fix will only exclude /data/media path and not other media files/folders
6.42.9 (30.05.2014)
- default again to libtar for backup/restore
6.42.7 (30.05.2014)
default to busybox tar:
- use busybox tar by default as it now supports selinux context backup/restore
- unify libtar and busybox tar options (-p for selinux context)
- remove now deprecated external selinux container code
6.42.5 (30.05.2014)
- f2fs: recreate /etc/fstab after ext4/f2fs conversion for proper use of system mount command
- comment useless dead code
6.42.4 (30.05.2014)
- f2fs: fix nandroid restore to f2fs partitions
- f2fs: support format extra storage to f2fs (vold patch needed)
- f2fs: support switching between f2fs/ext4 (needs f2fs in kernel modules), thanks @KumaJaya
- f2fs: reload volume table after f2fs/ext4 conversion (no reboot needed after conversion)
- f2fs: do not format whole /data when not expected on /data/media devices
- f2fs: allow /data f2fs/ext4 conversion for non data_media devices
6.41.8 (26.05.2014)
Preserve recovery settings after a wipe
- on settings change, create a second copy of recovery settings on primary storage (/sdcard)
- on recovery exit, always copy recovery settings to sdcard if no copy is present
- after a wipe, on recovery exit, try to restore settings from the copy on primary storage
- fix save/restore settings menu labels
- libtouch_gui 1.22
6.41.6 (12.05.2014)
- update exfat to dorimanx 1.2.9 latest sources
- fix compile error when enabling BOARD_RECOVERY_USE_BBTAR
- repo sync latest sources
- Galaxy Tab Pro 8.4 WiFi SM-T320 (mondrianwifi)
- HTC M7 variants: use new cm kernel with exfat sources
- HTC M8 variants: use new unified recovery
6.41.5 (11.05.2014)
- libtouch_gui 1.21: auto detect BRIGHTNESS_SYS_FILE path if it is not set during compile
* search for the file in most common locations
* if found, save it to recovery settings ini file to be called on next recovery starts
* else, disable adjust brightness function to avoid error logs on recovery start
- fix various compiler warnings and errors
- enhance pre-compile setup
- dedupe: merge clean up code from @xiaolu
- merge: fix restorecon_from_file potential crash from @xiaolu (only for BOARD_RECOVERY_USE_BBTAR)
- fix 240x320 images
- merge "cwm: Honor recovery variant "
- merge "cwm: Remove hardcoded paths"
- merge "Keep 'show log' on screen until user dismisses it"
- create /data/media directory after internal storage is wiped
prevents denial to read/write from internal storage under some circumstances
- open source touch_gui library
- update licence files
6.40.1 (03.05.2014)
- proper libtar implementation: support backup/restore of selinux context inside archive
- dedupe: support backup/restore of selinux context by @Chenglu
- libtouch_gui 1.20: support custom key files (BOARD_CUSTOM_RECOVERY_KEYMAPPING)

Thanks for great work!
could u make it for HTC E8? i have the partions but dont know how to compile a rec...thanks

Great man, was always a fan of cwm but abandon this due to the lacking of touch capabilities..
---------- Post added at 11:51 AM ---------- Previous post was at 11:50 AM ----------
One question, does this recovery support off-line charging?

Can you elaborate how to install
Kindly let me know what is fastboot.
How to open fastboot?
Sorry, I never use HTC before.

Can u make a flashable zip plzz?
Sent from my HTC D816w using XDA Premium 4 mobile app

Not sure if I got it right...I tried to access the /etc directory to replace the platform.xml file, but i only found 4 files inside. I have already mounted /system before launching aroma so...am i missing anything?
Can't use TWRP cuz its not supported on my 816 (touch screen doesn't work). Mine is a single sim 4g malaysian model.
Never mind, got it to work after a few tries... lol, finally i can get camera-fv to work now.
Other than that...looks great. be careful on the touches...the go back key is way too close to the to the rest of the format options
p/s: not very sure what happened...after flashing this in, i got the tampered word in my fastboot screen. Previously with earlier versions of cwm, it only has the unlocked word. not sure what will actually trigger the tampered word.

Battery incorrect
hi ! I flashed this recovery . I find the battery number is incorrect . the number show 100% under normal boot ,but the number become 50% only when entering recovery .
If anyone know what happen ?

It says Android is upgrading and keeps rebooting,please help.

[MOD][15-NOV-2016] MultiROM 33 + TWRP_3.0.2-6_MultiROM_Edition_2016-11-15 [TestBuild]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You use this tool at your own risk!!
I have tried to put as many safeguards as I can,
but I cannot be held accountable for any soft-bricks, hard-bricks, loss of data and/or information,
or anything else going wrong.​
Introduction
MultiROM is one-of-a-kind multi-boot mod for HTC 10. It can boot any Android ROM as well as other systems like Ubuntu Touch, Plasma Active, Bohdi Linux or WebOS port. Besides booting from device's internal memory, MultiROM can boot from USB drive connected to the device via OTG cable. The main part of MultiROM is a boot manager, which appears every time your device starts and lets you choose ROM to boot. You can see how it looks on the left image below and in gallery. ROMs are installed and managed via modified TWRP recovery. You can use standard ZIP files to install secondary Android ROMs, daily prebuilt image files to install Ubuntu Touch and MultiROM even has its own installer system, which can be used to ship other Linux-based systems.
Features:
* Multiboot any number of Android ROMs
* Restore nandroid backup as secondary ROM
* Use for example Ubuntu Touch or Desktop alongside with Android, without the need of device formatting
* Boot from USB drive attached via OTG cable
​
Warning!
It _is_ dangerous. This whole thing is basically one giant hack - none of these systems are made with multibooting in mind. It is messing with boot sector and data partition. It is no longer messing with data partition or boot sector (actually the no-kexec workaround is messing with your boot sector), but it is possible that something goes wrong and you will have to flash factory images again.
Make backups. Always.​
Now seriously: HTC 10 Warnings!
Beware of Dragons, Goblins, Gremlins and lingering primary_boot.img(RIP)
Due to lack of kexec-hardboot kernel support, I am messing with your boot partition!​
Since we lack kernels with kexec-hardboot patch, I'm using a workaround to bypass that restriction, and although tested successfully on the HTC One M7, M8, M9, and HTC 10, as well as several other devices I'm not involved with, things can still go wrong, since I'm directly flashing your boot partition.
I have yet to see any negative effect of that, and version 4 of the no-kexec workaround is much more robust, you should still be aware that I'm "temp-flashing" your real boot partition.
If you are in doubt, either ask, or avoid it completely; MultiROM has always been a huge hack to begin with, and this is even more of a hack.
Always have a backup ready. Possibly even RUU! ... I have not had to, I have also not encountered any loss whatsoever, but better be safe!
Current problems on the HTC 10
* OTG is untested and unsupported at the moment
* exFAT partitions are not supported currently
^^ those haven't worked for quite a while, so it's not really HTC 10 specific
Encrypted devices: Your secondary ROMs do not know your device is encrypted, do not (again: do not) try to encrypt your device while booted into a secondary ROM.​
Secure boot (ie require Password/Pattern/PIN on boot): Thanks to @Captain_Throwback who found out, that under certain circumstances (yet to be determined), your primary (possibly secondary as well) may loose the ability unlock your LockScreen using your Password/Pattern/PIN.
The same thing has been observed in TWRP restores, and although your password is correct and does decrypt your device, it breaks at the lockscreen for some reason.
I recommend you disable Password/Pattern/PIN on boot until / IF the issue is resolved, but in case you do find yourself in that situation, please go ahead and follow the instruction posted in the TWRP thread:
10. After I restored my Data backup and boot back to Android, I'm entering the correct PIN/password, but it's telling me the password is wrong. What happened, and how do I fix it?
It appears that sometimes after restoring a backup of Data where security was enabled (such as a PIN or password lock), the device does not recognize the correct password. There are two ways to avoid this issue:
Disable security in Android before making a backup of data.
After restoring Data, while still in TWRP, use the TWRP File Manager to navigate to /data/system and delete all the locksettings.* files (such as locksettings.db, etc). When you reboot, the password will be gone.
​
Please bear in mind, that some ROMs (particularly Sense based ROMs), will take a long time to boot up, well above 10minutes, so patience!​
Installation
Not supported at this time: 1. Via MultiROM Manager app
This is the easiest way to install everything MultiROM needs. Install the app and select MultiROM and recovery on the Install/Update card. If the Status card says Kernel: doesn't have kexec-hardboot patch! in red letters, you have to install also patched kernel - either select one on the Install/Update card or get some 3rd-party kernel here on XDA. You are chosing kernel for your primary ROM, not any of your (future) secondary ROMs, so select the version accordingly.
Press "Install" on the Install/Update card to start the installation.
​
2. Manual installation
MultiROM has 3 parts (well, it should, but in this case it only has 2) you need to install:
Modified recovery (TWRP_3.x.x-x_multirom_pme_YYYYDDMM-pp.img) - download the IMG file from second post and use
TWRP itself to flash newer TWRP to recovery partition:
TWRP->Install-> select Images -> TWRP_3.x.x-x_multirom_pme_YYYYDDMM-pp.img -> to Recovery -> Reboot to Recovery
.
or
.
"fastboot flash recovery TWRP_3.x.x-x_multirom_pme_YYYYDDMM-pp.img"
(in download mode, for example)
Code:
C:ADBADB_10>adb reboot download
C:ADBADB_10>fastboot devices
FAxxxxxxxxxx fastboot
C:ADBADB_10>fastboot flash recovery TWRP_3.0.2-6_multirom_pme_20160917-02.img
target reported max download size of 800000000 bytes
sending 'recovery' (25700 KB)...
OKAY [ 2.001s]
writing 'recovery'...
(bootloader) HOSD CL#761759
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 2.872s]
finished. total time: 4.878s
C:ADBADB_10>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.004s]
finished. total time: 0.005s
MultiROM (multirom-YYYYMMDD-vXXd-UNOFFICIAL-pme.zip) - download the ZIP file from second post and flash it in the MultiROM Recovery.
.
.
Patched kernel - You can use either one of the stock ones in second post or third-party kernels which include the patch, you can see list in the second post. Download the ZIP file and flash it in recovery.
We don't have a patched kernel, so I'm using a workaround.
You current rom will not be erased by the installation.
Download links are in the third post.​
Adding ROMs
1. Android
Go to recovery, enter the MultiROM section of TWRP (by clicking the icon in to top right corner) -> Add ROM. Select the ROM's zip file and confirm. As for the space, clean installation of stock 4.2 after first boot (with dalvik cache generated and connected to google account) takes 676mb of space.​
2. Ubuntu Touch this is NOT SUPPORTED
Use the MultiROM Manager app to install Ubuntu Touch.
Ubuntu Touch is in development - MultiROM will have to be updated to keep up with future changes in Ubuntu, so there's a good chance this method stops working after a while and I'll have to fix it.
Using USB drive
During installation, recovery lets you select install location. Plug in the USB drive, wait a while and press "refresh" so that it shows partitions on the USB drive. You just select the location (extX, NTFS and FAT32 partitions are supported) and proceed with the installation.
If you wanna use other than default FAT32 partition, just format it in PC. If you don't know how/don't know where to find out how, you probably should not try installing MultiROM.
If you are installing to NTFS or FAT32 partition, recovery asks you to set image size for all the partitions - this cannot be easilly changed afterward, so choose carefully. FAT32 is limited to maximum of 4095MB per image - it is limitation of the filesystem, I can do nothing about that.
Installation to USB drives takes a bit longer, because the flash drive is (usually) slower and it needs to create the images, so installation of Ubuntu to 4Gb image on my pretty fast USB drive takes about 20 minutes.
Enumerating USB drive can take a while in MultiROM menu, so when you press the "USB" button in MultiROM, wait a while (max. 30-45s) until it searches the USB drive. It does it by itself, no need to press something, just wait.​
Updating/changing ROMs
1. Primary ROM (Internal)
Flash ROM's ZIP file as usual, do factory reset if needed (it won't erase secondary ROMs)
Go to the MultiROM section of TWRP (by clicking the icon in to top right corner) and do Inject curr. boot sector.
2. Secondary Android ROMs
If you want to change the ROM, delete it and add new one. To update ROM, follow these steps:
Go to the MultiROM section of TWRP (by clicking the icon in to top right corner) -> List ROMs and select the ROM you want to update.
Select "Flash ZIP" and flash ROM's ZIP file.
In some cases, you might need to flash patched kernel - get corresponding patched kernel version from second post and flash it to the secondary ROM sama way you flashed ROM's ZIP file.
Explanation of recovery menus
Main menu
- Add ROM - add ROM to boot
- List ROMs - list installed ROMs and manage them
- Inject boot.img file - When you download for example kernel, which is distrubuted as whole boot.img (eg. franco kernel), you have to use this option on it, otherwise you would lose MultiROM.
- Inject curr. boot sector - Use this option if MultiROM does not show up on boot, for example after kernel installation.
- Settings - well, settings.
Manage ROM
- Rename, delete - I believe these are obvious
- Flash ZIP (only Android ROMs) - flash ZIP to the ROM, for example gapps
- Add/replace boot.img - replaces boot.img used by this ROM, this is more like developer option.
- Re-patch init - this is available only for ubuntu. Use it when ubuntu cannot find root partition, ie. after apt-get upgrade which changed the init script.​
Screenshots
Special Thanks
@Tasssadar: Original author of MultiROM.
@Captain_Throwback: For testing, giving me a hard time, and warning you guys about the secure boot (ie require Password/Pattern/PIN on boot) issue.
zhuowei: For the fake properties idea.
Source code
MultiROM - https://github.com/Tasssadar/multirom (branch master)
Modified TWRP - https://github.com/Tasssadar/Team-Win-Recovery-Project (branch master)
Device files - ....
Everything is here:
https://github.com/multirom-htc
https://github.com/nkk71​
XDA:DevDB Information
MultiROM, Tool/Utility for the HTC 10
Contributors
nkk71
Version Information
Status: Stable
Current Stable Version: 33testbuild
Stable Release Date: 2016-11-15
Created 2016-09-18
Last Updated 2016-11-15

FAQ and other notes
HTC 10 - Peculiarities / Bugs
There are no kexec-hardboot kernels for the HTC 10, so you need to have the no-kexec-workaround enabled. Please refer to post 4 for details.
.
A few notes about enabled adb in MultiROM boot menu: having adb enabled in MultiROM boot menu (TWRP->MultiROM->Settings->Enable ADB) may interfere with the ROMs "connection" (MTP, etc), possibly even prevent the ROM from booting (rarely, but I've seen it happen). Since this option is usually only used for debugging, I recommend to keep this option disabled.
.
Secure boot (ie require Password/Pattern/PIN on boot): Thanks to Captain_Throwback who found out, that under certain circumstances (yet to be determined), your primary (possibly secondary as well) may loose the ability unlock your LockScreen using your Password/Pattern/PIN.
The same thing has been observed in TWRP restores, and although your password is correct and does decrypt your device, it breaks at the lockscreen for some reason.
I recommend you disable Password/Pattern/PIN on boot until / IF the issue is resolved, but in case you do find yourself in that situation, please go ahead and follow the instruction posted in the TWRP thread:
10. After I restored my Data backup and boot back to Android, I'm entering the correct PIN/password, but it's telling me the password is wrong. What happened, and how do I fix it?
It appears that sometimes after restoring a backup of Data where security was enabled (such as a PIN or password lock), the device does not recognize the correct password. There are two ways to avoid this issue:
Disable security in Android before making a backup of data.
After restoring Data, while still in TWRP, use the TWRP File Manager to navigate to /data/system and delete all the locksettings.* files (such as locksettings.db, etc). When you reboot, the password will be gone.
​
Something not working, or you need help debugging
Please provide the following information:
a detailed explanation of the problem
.
the recovery.log (found in /tmp/recovery.log or by copying it to the sdcard and then copying it to PC)
.
the logs from /sdcard/multirom-klogs (zip those up, before uploading). that option needs to be enabled in TWRP->MultiROM->Settings
.
the link to the thread and name of file (+ which version) you are having problems with
.
due to the large size of some of these ROMs, I may not have time to download and test them, so please also upload the updater-script (found in ROM.ZIP under /META-INF/com/google/android/)
Supported File Systems for secondary ROMs
Currently only the following partitions can boot secondary ROMs:
Internal Storage
.
An external sdcard, properly partitioned with an ext4 partition (see below)
Partitioning your External SD Card
Warning: You will loose all information on your external sdcard!!
There is no way of retrieving that information, so copy everything to your PC before proceeding!!
In order to make a decent assessment of the size of your ext4 partition, below is a small table of some of the ROMs I've installed to my ext4 partition:
Code:
[U][B]2.5G BeanStalk-6.20-20160905-pm[/B][/U]
1.1G BeanStalk-6.20-20160905-pm/data
1.3G BeanStalk-6.20-20160905-pm/system
[U][B]1.4G cm-13.0-20160915-UNOFFICIA[/B][/U]
396M cm-13.0-20160915-UNOFFICIA/data
960M cm-13.0-20160915-UNOFFICIA/system
[U][B]3.8G ice-2.1.1_PERFUME_UHL_M60_[/B][/U]
1.7G ice-2.1.1_PERFUME_UHL_M60_/data
2.0G ice-2.1.1_PERFUME_UHL_M60_/system
[B][U]4.0G Viper10_3.1.0[/U][/B]
1.8G Viper10_3.1.0/data
2.1G Viper10_3.1.0/system
Please bear in mind, those installs have none or very few extra downloaded apps, which would also be using the data partition; if you need a reference for comparison, you can select Backup in TWRP, which will show you the size of your current /data partition (this excludes "Internal Storage")... mine is about 8GB !
FYI: I'm using a 200GB sdcard, and have it setup with a 30GB ext4 partition... but that's just me
Step 1: Partitioning
TWRP Main Menu
-> Advanced
-> Partition SD Card
-> selected Micro SDCard
Set the EXT Size to the size of your choice
Set Swap Size to zero
Set File System to ext4
-> swipe to proceed with repartitioning
go back to the main menu.
Example Screenshots:
TWRP Main Screen
Select Advanced
Select Partition SD Card, Micro SDCard is selected, press OK
Set the EXT Size to the size of your choice
Set Swap Size to zero
Set File System to ext4
then swipe to begin
Partitioning complete
Step 2 (optional, but recommended): Changing the first partition to exFAT
The repartitioning in step 1, has formatted your card with two partitions, the first one (used by ROMs as external storage) being FAT32 formatted. Since FAT32 has certain limitations, in particular the 4GB file size limit, it's recommended to reformat it as exFAT.
TWRP
-> Wipe
-> Advanced Wipe
-> select external_sd or Micro SDCard (whichever is shown in the menu)
-> Repair or Change File System
-> Change File System
-> select exFAT
-> swipe to reformat the first partition to exFAT
Example Screenshots:
Wipe Menu, select Advanced Wipe
Advanced Wipe Menu:
select external_sd or Micro SDCard (whichever is shown in the menu)
and click Repair or Change File System
Select Change File System
Select exFAT
Swipe to reformat to exFAT
Formatting complete
​
Device encryption
Since v32, MultiROM supports encryption on this device (it has to be added for each device separately). It works only with Android-based secondary ROMs and the secondary ROMs don't know the device is encrypted, so they would allow you to encrypt the device again - do not do that. If you're using password, pin or pattern for the encryption, MultiROM will ask you for the password on boot. If you're booting the primary ROM, then Android will ask you for the password _again_ - unfortunately, there is no way for me to pass the "unencrypted" status to Android. If you're booting secondary ROM, MultiROM will ask you for the password again after the reboot - that's because I have to unencrypt the /data partition after the ROM's kernel is loaded.
I could omit the second password prompt when booting secondary ROM by temporarily saving the password somewhere, but that's obviously unsafe. So is using encryption with unlocked device though, so I might add this later.​About security
In order to make multi-booting possible, MultiROM has to sacrifice some security measures. Firstly, on secondary Android ROMs, /system is not mounted read-only. While there are other things preventing malicious software from messing with /system, this might potentialy make it easier for such software to attack that system.​
What do the ROMs share?
All ROMs are separate, except /sdcard, which is shared between all Android ROMs.​
How many ROMs can I have?/Where are the ROMs stored?
You can have as many ROMs as you can fit in your /sdcard. All the ROMs are stored in /sdcard/multirom/roms or on an USB drive. This folder is unaccessible in Android, to prevent mediascanner from scanning it. You can either in recovery, or obtain root and go to /data/media/0/multirom/roms.​
The menu with all the ROMs won't show up during boot, how to fix it?
Either re-flash the MultiROM zip or go to recovery, Advanced -> MultiROM -> Inject curr. boot sector.
The reason for this is that something rewrote your boot.img, which happens for example when you flash a kernel. MultiROM's boot menu is part of the boot image, so it has to be added into it again.​
My secondary ROM(s) no longer boot up, after I flashed a new primary ROM / Kernel / boot.img, and the MultiROM menu (as mentioned above) no longer appears
Please issue a restorecon on the particular ROM:
TWRP -> MultiROM -> select ROM in question -> Run Restorecon
Technical explanation
Usually most init.rc scripts will run a restorecon_recursive on /data and /mnt(also cache, but that's not too important for us)
Code:
restorecon_recursive /data
restorecon_recursive /mnt
this will supposedly restore file contexts (permissions if you prefer the older term) on all your data partitions, it will however break all your secondary ROMs as their system partition actually lives there, but the "permissions" have been overwritten to make it look like just normal data.
This is also why so many Android 7 (Nougat) MultiROM people (in other threads) are having so much trouble, as the file_contexts format has changed, and that hasn't been updated for the new format yet.​

Downloads
Current Test Builds
All Current Test Builds can be found on androidfilehost under MultiROM TEST BUILDS
You should be using these, not the ones mentioned below!
Definition of Test Builds: These are stable builds which I have and am using (and testing). They contain the most up to date fixes as mentioned in the changelog under <tba>.
The main reason I'm calling them "Test Builds", is because they have not gone through extensive testing as what I would usually do for a "release version". I think most people would call them release versions, but I tend to be more conservative.
.
The second reason, they get uploaded to AFH instead of directly here, is two fold:
I'm maintaining the M7, M8, M9 and HTC 10 MultiROM versions, and uploading to AFH is easier and faster for me.
Updating the actual threads and posts, is too time consuming every time I want to push an update.
1. Main downloads
Modified recovery (based on TWRP): TWRP_3.0.2-6_multirom_pme_20160920-04.img
MultiROM Main ZIP: multirom-20160920-v33b-UNOFFICIAL-pme.zip
Not supported at this time MultiROM Manager Android app: Google Play or link to APK
AndroidFileHost (mirror & old versions): https://www.androidfilehost.com/?w=files&flid=114470
​
2. third-party kernels with kexec-hardboot patch
None exist at the moment, hence the use of the workaround.​
3. Uninstaller
MultiROM uninstaller: multirom_uninstaller
Flash this ZIP file to remove MultiROM from your device. It will erase all secondary ROMs. If you don't want MultiROM menus in recovery, re-flash [RECOVERY][pme] TWRP touch recovery, but it is not needed - those menus don't do anything if MultiROM is not installed.​
Changelog
MultiROM Managar App:
Code:
2016-11-11 MultiROM Manager App[-debug] version
=====================
* Add support for external storage
(allows listing, manipulating, and booting secondary ROMs on external storage)
* Highlight currently running ROM first
(also disallow deletion of it)
* Show ROMs in order of location (Current, then Internal, etc.)
* Allow duplicate ROM names if on separate partition
* Fix Widget
* Support for HTC 10 (pme)
* Support for HTC One M9 (hima)
* Support for HTC One M8
* Support for HTC One M7 (m7univ)
MultiROM:
Code:
2017-10-27 MultiROM v33
=====================
* New 'System Partition Mode' ROMs ([URL="https://github.com/nkk71/multirom/commit/dfb1a294ab55374b80bb6f14c2422850610c986d"]technical details[/URL])
* Android 8.0 compatibility
* Fix sdcardfs gid derivation ([URL="https://github.com/nkk71/multirom/commit/e0b749567f4ad976a5aabcdbd944f44f9c68b399"]technical details[/URL])
* vold_decrypt (Decryption on the HTC One M9 and HTC 10)
* trampoline511 (aka trampolineMk2)
* New default icons for Android ROMs when not set in app
* Code fixes and cleanups
2016-11-15 MultiROM v33
=====================
* Preliminary support for Android 7 (Nougat)
* Add support functions for MultiROM Manager App
(allows listing, manipulating, and booting secondary ROMs on external storage)
* Update no-kexec to version 4.1
+ changes to second boot detection
+ no-kexec versioning to allow auto-updating when needed
+ code cleanup
* Reboot to recovery on failed data partition mount
(avoids potentially being stuck in bootloop)
* Add reboot to recovery button on decryption screen when in second boot
* Code fixes
MultiROM v33b
=====================
* Fix [possible] boot img truncation when used in daisy-
chaining [older] systemless SuperSU, [B][U]and[/U][/B] rebooting
directly from AROMA Installer (info to follow later)
* Fixed mr_init_devices for certain devices (better fix will follow)
* Fix the auto-boot issue to properly fall back to primary
when secondary is deleted
MultiROM v33a
=====================
* Initial port for the HTC 10 (pme)
* Updated no-kexec to version 4
* autoboot: "Use last booted ROM" now works with external ROMs
previous changelogs are in M7/M8/M9 threads
i'll consolidate at some point hopefully
Recoveries:
Code:
2017-10-27
=====================
* Fully merged with official TWRP 7.1 branch
* New 'System Partition Mode' ROMs ([URL="https://github.com/nkk71/multirom/commit/dfb1a294ab55374b80bb6f14c2422850610c986d"]technical details[/URL])
* Android 8.0 compatibility
* Auto detect possible use of legacy props
* vold_decrypt (HTC decryption on the M9 and 10)
* Install from backup using a System_Image
* libbootimg: Updated to support AnyKernel2
* Fixes for some boot.img patchers
* Block mount/unmount of secondary partitions
* Use own loop devices to avoid conflicts with other installers
* Code fixes and cleanups
2016-11-15 (33e)
=====================
* Fix restorecon for secondary ROMs
* Rebased on android-7.0 branch
* Preliminary support for Android 7 (Nougat)
* Fix no-kexec restore primary_boot.img on devices
with PIN/Pattern/Password encryption
* Fix flashing of certain gapps zip's which are
missing the updater-script file
[STRIKE]* Add warning on failed injection[/STRIKE]
* Minor code cleanup
2016-09-20 (33b)
=====================
* Fix some installer scripts using certain mount/unmount commands
* Wake up screen before starting flash (fixes AROMA installer issues)
* Changed fstab so external ext4 won't get wiped with a factory reset
2016-09-17 (33a)
=====================
* initial port for the HTC 10 (pme)
* Based on TWRP 3.0.2 android-6.0 tree & branch
* Includes official TWRP commits up to Aug 23, 2016
previous changelogs are in M7/M8/M9 threads
i'll consolidate at some point hopefully

No-kexec workaround (version 4)
As of this version you need to manually enable the no-kexec workaround.
Actually, depending on the developer, (s)he may have already enabled it. Nonetheless, you can still choose to override the settings:
Go to TWRP -> MultiROM -> Settings
and enable the No-KEXEC workaround option
once you do you'll also have the option for ADVanced settings, please see below for a detailed description, though in most cases the default should suffice.​
Explanation of the no-kexec workaround advanced options
(the Info page is supposed to provide the same information as here, but I haven't added that yet)
1- Use no-kexec only when needed
This should be the default for most users, the other options are more intended for advanced uses (kernel debugging, and such).
If MultiROM detects a kexec-hardboot enabled kernel in primary slot, it will use the standard kexec method to boot the secondary. If on the other hand it does not detect that the kernel supports kexec-hardboot then it will use the workaround.​
2- ... but also ask for confirmation before booting
Same as option 1 above, but in addition you will be presented with a confirmation message, if the workaround is about to be used:
3- Ask whether to kexec or use no-kexec on booting
If the kernel in primary slot does support kexec-hardboot'ing then you will be presented with a choice of which method to use
If the kernel does not support kexec-hardboot then you'll be informed as in option 2 above​
4- Always force using no-kexec workaround
Forces the no-kexec workaround to be used, even if the kernel in primary slot has kexec-hardboot support​
Options 2 and 3, always present the user with a GUI confirmation, whereas option 1 and 4 will act as instructed without prompting the user.​
Visual feedback provided by the Booting... card
Regular kexec-hardboot boot
Booting using no-kexec-workaround
​
How does all this work, etc
The workaround:
MultiROM TWRP recovery works, and is able to flash ROMs to secondary
MultiROM in essence works (in particular, able to change the mount points during bootup)
what does not work is being able to use the secondary ROM's kernel (due to the lack of kexec-hardboot kernel and tools)
So how do we deal with booting any ROM if we can't use the proper kernel for the ROM?
Easy :
Upon selection of the ROM during MultiROM boot menu, we do the following:
"flash" secondary boot.img to primary partition slot
initiate a full reboot (secondary boot.img is in primary slot)
let the ROM auto-boot up on second boot
The good part:
It works.
.
Every secondary ROM has a boot.img file we can easily access to use the workaround; when you flash a ROM in MultiROM TWRP, not only are the "virtual" system, data, and cache partitions created, but also the boot.img.
The secondary ROMs' boot.img will be found /data/media/0/multirom/<name of rom>/boot.img or if it's on your external ext4 in the appropriate rom folder
We use that file and flash it to primary real boot partition and then upon second boot, the correct boot.img is in place for the correct ROM.
The bad part:
Unlike secondary ROMs, the primary ROM does not have a boot.img file... since it is the primary ROM, the boot.img should always be in the real boot partition, since MultiROM expects the primary kernel to have kexec-hardboot capability, but it does not, so I just go ahead and mess with your primary boot partition.
Since we have no "boot.img" file for the primary, my workaround makes a backup of the boot partition and names it primary_boot.img
In version 4 of the workaround, this backup is created and used only when booting a secondary ROM. When a secondary ROM is selected it's boot.img is flashed to primary slot, upon booting into the secondary ROM, the primary_boot.img is restored.
Long story short: the difference between kexec and no-kexec-workaround
Usual kexec-hardboot MultiROM
Select secondary ROM
MultiROM detects a boot.img
MultiROM reads the secondary boot.img into memory
MultiROM initiates a kexec second boot but into the secondary boot.img from above
MultiROM continues
No-kexec-workaround MultiROM
Select secondary ROM
MultiROM detects a boot.img
MultiROM flashes the secondary boot.img into the primary boot partition
MultiROM initiates a normal second boot but with the secondary boot.img in the real boot partition
MultiROM restores the primary_boot.img and continues as usual
so the difference is in point 3... whereas normal kexec'ing loads the secondary boot.img into memory and goes from there, the workaround, actually flashes it to the real primary boot partition... and continues normally from there
Devices using the no-kexec-workaround successfully
MultiROM threads for:
HTC One M7
HTC One M8
HTC One M9
.
Moto G 2015 by GtrCraft
Moto X Play by GtrCraft
OnePlus One (starting here) by KINGbabasula
OnePlus 3 by martinusbe
OnePlus X by martinusbe
Sony Xperia Z5 by Myself5
Sony Xperia L by STRYDER~007
Sony Xperia SP by Adrian DC
Xiaomi Redmi 2 by premaca
Wileyfox Swift by @beroid
.
(possibly Samsung Note 4, unsure if that was continued or not)
Others; unofficial builds? (if you are, kindly let me know, and I'll add you to the list)

reserved for @Captain_Throwback

Oops

files are in the download section, the posts need some editing, bug gonna be a bit busy tomorrow
so enjoy

Ok,ok,you will say that im noob,but i flashed both files,flash the RR ROM,but the multirom menu doesnt show and it boots me directly to primary rom

azZA_09 said:
Ok,ok,you will say that im noob,but i flashed both files,flash the RR ROM,but the multirom menu doesnt show and it boots me directly to primary rom
Click to expand...
Click to collapse
That's not a "bug report"
Please provide detailed information, and logs... BTW, I didnt add the advanced kernel logging feature "by mistake", it's so you can get "easier" logs... but if those exist, then you still need to pull a kmsg
Code:
adb pull /sys/fs/pstore/console-ramoops
No boot menu, normally means that trampoline (if it's in the above log), wasnt able to mount data... or it's not even there

nkk71 said:
That's not a "bug report"
Please provide detailed information, and logs... BTW, I didnt add the advanced kernel logging feature "by mistake", it's so you can get "easier" logs... but if those exist, then you still need to pull a kmsg
Code:
adb pull /sys/fs/pstore/console-ramoops
No boot menu, normally means that trampoline (if it's in the above log), wasnt able to mount data... or it's not even there
Click to expand...
Click to collapse
Sorry dude,Im at work atm and I think too slow ). I will provide logs tomorrow,but maybe somebosy can provide them since then. Once again,great job and im sure you will fix every problem

azZA_09 said:
Sorry dude,Im at work atm and I think too slow ). I will provide logs tomorrow,but maybe somebosy can provide them since then. Once again,great job and im sure you will fix every problem
Click to expand...
Click to collapse
open a terminal emulator on your phone, and
Code:
cat /sys/fs/pstore/console-ramoops | grep tramp
then you'll see if trampoline is even in there

nkk71 said:
open a terminal emulator on your phone, and
Code:
cat /sys/fs/pstore/console-ramoops | grep tramp
then you'll see if trampoline is even in there
Click to expand...
Click to collapse
It shows only the # after that

Download links are not working.

azZA_09 said:
It shows only the # after that
Click to expand...
Click to collapse
then probably the log is way after trampoline & multirom, so you need to enable "kernel logging"... I didnt add that by mistake

http://forum.xda-developers.com/devdb/project/?id=17079#downloads
Tab isn't showing up for me, but that link should work.

jsaxon2 said:
Download links are not working.
Click to expand...
Click to collapse
They're supposed to be here
If you can't access them, I've uploaded them to AFH as well

Got it installed and booted up cm13 as secondary. Working good so far. Thanks for this. I'm back on Viper running from primary.

jsaxon2 said:
Got it installed and booted up cm13 as secondary. Working good so far. Thanks for this. I'm back on Viper running from primary.
Click to expand...
Click to collapse
hmm is that a complaint? ... sounds rather positive, so i'm unsure. i usually only hear complaints
Well, if it's not, thanks for reporting back :good:
I currently have an old version of Viper10 as primary / daily
and as secondaries:
ice-2.1.1_PERFUME_UHL_M60_SENSE80GP_HTC_Europe_1.90.401.3
BeanStalk-6.20-20160905-pme
cm-13.0-20160915-UNOFFICIAL-pme
and some other weird stuff

nkk71 said:
hmm is that a complaint? ... sounds rather positive, so i'm unsure. i usually only hear complaints
Well, if it's not, thanks for reporting back :good:
I currently have an old version of Viper10 as primary / daily
and as secondaries:
ice-2.1.1_PERFUME_UHL_M60_SENSE80GP_HTC_Europe_1.90.401.3
cm-13.0-20160915-UNOFFICIAL-pme
and some other weird stuff
Click to expand...
Click to collapse
Lol, not a complaint, it's a compliment. You have done excellent work. Just wanted to report that it is working. I'm too tired to mess with it anymore, but awesome that I can test CM builds and get right back to my daily driver.
Job well done.

jsaxon2 said:
Lol, not a complaint, it's a compliment. You have done excellent work. Just wanted to report that it is working. I'm too tired to mess with it anymore, but awesome that I can test CM builds and get right back to my daily driver.
Job well done.
Click to expand...
Click to collapse
Thank you, I do enjoy positive feedback, Hope you enjoy it
as well as comments, thoughts and ideas.
@ all, If something is wrong, please be as descriptive as possible... please no "it doesn't work" posts.