Related
So I just got another new case.
I got it from eBay seller augustonline for $3.89 w/ free shipping.
http://cgi.ebay.com/Black-Rubber-Ha...000-GALAXY-S-/150475142893?pt=PDA_Accessories
This is similar to the mesh snap-on case that others have posted about. It's a single piece that snaps on to the back of the phone. The material is hard plastic but it has a bit of a rubberized feel which provides just a little grip.
The fit is perfect. And, unlike the mesh case, it does not have the awkward cutout for the TV antenna that the Korean cases have.
As others have pointed out with this type of case, it does not provide full protection for all sides. I was also concerned about this, but found that it wraps around the edges just enough to protect the face of the phone. So, if you place it face-down the phone doesn't touch. Also, the corners are protected but the top and bottom are exposed.
It's a solid color with no branding so if you really like the Galaxy S logo, you won't be able to see it with this case.
All in all, this is a nice case and if you like this type of case, I would definitely recommend it. It fits well, has a nice clean look to it, and is less than $5. I think this will be my daily driver for a while (or until some positive reviews of the SGP Slider case start coming in).
Sweet as I was wondering whether the fit would be good or not, so thats good news
Can't wait for my orange one to get here!
Cool good to know it fits perfectly i ordered a green one of these almost two weeks ago i should be receiving it any day now
The case isn't bad for $4 (or the $8 I paid from a US seller), but don't expect it to hold up for very long. The rubberized texture is wearing off after less than a week.
newstoneage said:
The case isn't bad for $4 (or the $8 I paid from a US seller), but don't expect it to hold up for very long. The rubberized texture is wearing off after less than a week.
Click to expand...
Click to collapse
I was just thinking about updating this post when I saw your reply. I noticed this morning that the rubberized coating is coming off on the corners of the case. It's not very noticeable at the moment, but I imagine it will start to peel off everywhere in the not so distant future.
For me the case is temporary until SGP gets their stuff together, but I don't think I would recommend this case to anyone that is looking for long-term protection.
that looks pretty gnarly. I have the snap on two piece case from T-Mobile. With the chrome bezel and rubbery back. Once I get bored of it I'll have to try that one.
Sent from my SGH-T959 using XDA App
Love this case so far. Especially with my custom logo! =D
There is no player on the warriors with the number 89. That's just the number I like personally.
I don't think this can be compared to mesh case. The quality of the korean mesh case is awesome. That is why it is like 20 bucks.
Sent from my SGH-T959 using XDA App
Can someone recommend a cheap case for around $10? I've been running the Captivate naked but I think it's about time I consider getting some protection for it. The reason why I've been running it naked for so long is because I don't like the added bulk and heft they bring. However, nothing is perfect in this world and I'd rather suffer from added bulk and heft than risk scratching my Captivate. Of course the slimmer and lighter they are, the better. It'd be great if I can also access the buttons easily.
Doing a quick search, I've come across Otterbox Impact for $7.50 + shipping on Amazon, or I can get a Body Glove for $7.95 + shipping. Or I can just get those cheap silicone cases, but they can get dirt in pretty easily. My friend has a silicone case for his iPod Touch and it looks nasty if you don't keep it clean.
With all the threads on cases, you felt the need to start this one? The Body Glove is probably the simplest and best case out there in your price range.
Between those two get the otterbox. It feels much nicer in the hand and slides in and out of the l
Pocket much easier
Sent from my SAMSUNG-SGH-I897 using XDA App
Go to ebay and look for Captivate Argyle skin, if you are into argyle, They are 3-5$
insaneturbo13 said:
Between those two get the otterbox. It feels much nicer in the hand and slides in and out of the l
Pocket much easier
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
There's someone in the Body Glove Mirage thread with the exact opposite opinion. I guess these kinds of things vary from person to person
Miami_Son said:
With all the threads on cases, you felt the need to start this one? The Body Glove is probably the simplest and best case out there in your price range.
Click to expand...
Click to collapse
Yes because they all look so bulky and hefty (from pictures and reviews) anyways, and well, there's a reason why I kept my phone naked for so long. Don't want it bulky and heavy.
@Others. Thanks. I'll take a look.
I have an Ebay gel case, it's an amzer copy and adds very little bulk, and slides in and out of my pocket fine.. plus no plastic snaps to break when removing it.
FWIW, I got the Otterbox Impact through Amazon as well and am really happy with it. I checked out the Body Glove case and didn't like it, but as said everyone has their own opinions.
joeybear23 said:
I have an Ebay gel case, it's an amzer copy and adds very little bulk, and slides in and out of my pocket fine.. plus no plastic snaps to break when removing it.
Click to expand...
Click to collapse
I'd do this: the super-cheap TPU cases actually provide better protection them most expensive ones. TPU, not silicone.
s44 said:
I'd do this: the super-cheap TPU cases actually provide better protection them most expensive ones. TPU, not silicone.
Click to expand...
Click to collapse
I have a TPU case, and while it seems to add protection and is resistant against dirt, it is not resistant at all against grime and fingerprints. I swear the thing has layers and layers of fingerprints on it.
I ordered the Body Glove case and hope it doesn't have the same issues.
What's TPU...? Got link?
geokilla said:
What's TPU...? Got link?
Click to expand...
Click to collapse
Link to what TPU is: http://en.wikipedia.org/wiki/Thermoplastic_polyurethanes
Link to my case: http://www.futureshop.ca/en-CA/prod...spx?path=058fdee11e321fc183e7b257d44d6561en02
Auridran said:
Link to what TPU is: http://en.wikipedia.org/wiki/Thermoplastic_polyurethanes
Link to my case: http://www.futureshop.ca/en-CA/prod...spx?path=058fdee11e321fc183e7b257d44d6561en02
Click to expand...
Click to collapse
So TPU is like silicone but better? Reading that Wiki page reminded me of chemistry, which I did not do well on.
Argh $20 at FS. Might as well get Otterbox. I remember seeing some of the Otterbox cases, there's a plastic thing like silicone, which I guess is TPU and then there's a hard plastic for the back. Technically I can use it without the hard plastic, which would remove some bulk and weight I guess.
geokilla said:
So TPU is like silicone but better? Reading that Wiki page reminded me of chemistry, which I did not do well on.
Argh $20 at FS. Might as well get Otterbox. I remember seeing some of the Otterbox cases, there's a plastic thing like silicone, which I guess is TPU and then there's a hard plastic for the back. Technically I can use it without the hard plastic, which would remove some bulk and weight I guess.
Click to expand...
Click to collapse
Yeah, even for employees the case is like $12.
Amazon and eBay have TPU cases for <$5 shipped (US, anyway). They're pretty much all from the same Chinese factories, so it won't much matter...
The Body Glove is TPU with some texturing.
joeybear23 said:
I have an Ebay gel case, it's an amzer copy and adds very little bulk, and slides in and out of my pocket fine.. plus no plastic snaps to break when removing it.
Click to expand...
Click to collapse
I'm going to have to agree with this guy.
I have THIS and it is waaaay better than I would have given it credit for, if I hadn't bought it on recommendation from someone I trusted.
It is lightweight, no clips, protects the edges, is not bulky, does not show fingerprints, and is nearly see through in a smoky sort of way, but you still see the diamond pattern just enough to make it look like a $30 case.
I really cannot recommend it enough.
I've had mine for about 3 months now and if I ever lose it, there would be no other option for a replacement. I'm only buying this version as long as I have a Captivate.
For what it's worth, I also bought THIS because it was so damn cheap.......and it's flimsy, feels cheap, and gets fingerprints on it while collecting lint as well.
Stick with the Amzer, if you're not impressed with it, then there's no pleasing you.
evoic said:
I'm going to have to agree with this guy.
I have THIS and it is waaaay better than I would have given it credit from, if I hadn't bought it on recommendation from someone I trusted.
Click to expand...
Click to collapse
This is TPU. The one you didn't like is silicone. See what I mean?
Dude, this is what you want:
http://cgi.ebay.com/Smoke-TPU-Skin-...539794?pt=PDA_Accessories&hash=item20b50de392
2.95 shipped
This is what I have for my Captivate and I really like it. It is not too bulky, does not have a belt clip, is much sturdier than a silicone case (I personally like it better than my brother's Body Glove case), and I have not had any issues with dirt getting inside the case: http://cgi.ebay.com/Black-TPU-Skin-...294862?pt=PDA_Accessories&hash=item2c58ea0d4e
I bought mine as part of a $9.99 accessory package, which included a wall charger, car charger, USB cable, and the TPU case.
Cases are such a personal preference - some people like bigger heftier cases that provide maximum protection, whereas other people like more minimal cases that offer some protection but don't detract from the form factor of the phone. In my case, I fall within the latter category. When I used an iPhone, I usually opted for the Incipio Feather, the Griffin Reveal, or a simple skin (from Best Skins Ever or Invisible Shield).
Overall, I am very happy with the TPU case.
Thanks guys. I think I'll go with the cheap TPU that joeybear linked, but in a different colour and design. Maybe I'll buy a Otterbox Impact as well if I have to buy something from Amazon (HTC Desire screen protector and case)
Edit: Gg. The link by joeybear and JOLiu doesn't ship to Canada. Now I gotta spend more on Amazon or buy from other eBay shops, which is a lot more expensive and who knows how good the product from them is.
http://www.ebay.com/itm/TPU-Cases-S...s=63&clkid=5450595014366325529#ht_2001wt_1139
i think this is the best tpu case i have ever gotten for any of my phones.
TPU cases usually cover the buttons and make it very difficult to press buttons, or may be slightly too big for the phone so its not a snug fit.
This case that i got for the phone fits it perfectly, no loose sides, its tight just like how a condom should be
PROS, buttons are cut out, and its matte, great feel, fits perfectly
CONS, 10 bucks for a tpu case?? >:[ being that usually they're $2-5!
buy it! im happy with the case check it out!
I second this; it's a nice case (I don't have any experience with other cases, though). I got it from Amazon.com for around $6.
I will also second that, great case, I also have the trident aegis which is great when I am at work, other wise I change to this case when I am at home.
yep...great case still one of my favorites
Agree! this case is amazing. I also have the D30 from T-mobile store. Both are very good. But the D30 offers more protection.
I have this case as well. I got it on amazon for $11
Fits very well, all buttons are easily accessible. I also bought an Xtremeguard screen protector (screen, back, and 4 sides) but with this case the back and sides are superfluous. Smarter shopping and you could probably get a screenprotector + this TPU case for about $12 and get great protection for your phone.
i agree, this is the best tpu case ive ever owned or used. its cut outs for the buttons make it feel like the case isnt even there and its super thin and fits great. i got mine for 11 on amazon but i got the smoked clear one. here is some pics if it helps anyone out. just make sure u get the Revision 2 one. because i guess the first cases they made blocked the mic at the bottom. u can see in my pics that mine isnt blocked because its the Revision 2 version which they fixed that issue
Save a couple of bucks:
http://forum.xda-developers.com/showthread.php?t=1385705&highlight=tpu
vw671 said:
Save a couple of bucks:
http://forum.xda-developers.com/showthread.php?t=1385705&highlight=tpu
Click to expand...
Click to collapse
it's glossy though. me no like gloss
androidtoy09 said:
it's glossy though. me no like gloss
Click to expand...
Click to collapse
lol same here. mine isnt glossy, which is why i like it. plus the gloss makes the phone feel slippery in the hand lol
s10shane said:
lol same here. mine isnt glossy, which is why i like it. plus the gloss makes the phone feel slippery in the hand lol
Click to expand...
Click to collapse
It's actually not slippery at all. There is a bit of tacky-ness to it from the TPU material.
Just got this last week from Amazon and it's amazing. Definitely the best one hands down.
Which one to choose? which one to get? which one is better? Well i get messages all day everyday in regards of this. So I said..ima make a comparison video
Here u ll see the things I like from each case and the fitment as well
enjoy
http://youtu.be/EFGpC0KBjN4
I ordered myself the matte black tpu from Diztronic.
kch ugh
Nice quick review!
I gave both of these cases a fair go. Both of them I ran with for a week. I've decided to stick with my Diztronic TPU. Honestly. both cases are great.
Both cases are easy the slip in and out of pocket. Although slightly thicker, the Cruzerlite is still very slim. Does feel like it would offer a bit more protection in a fall. Since I have never dropped a phone my deciding factor, which might seem stupid to some people, is that the clear Cruzerlite case would get dust buildup from pocket lint and you'd visually be able to see it at the edges of the case. That can easily be fixed by purchasing a non-transparent Cruzerlite case.
The Diztronic case, my only problem with is most of the case fairly slick. What gives me a good grip on the phone is the rim of the case where you put the phone through. It's a different plastic finish from the rest of the case which is much easier to grip with your fingers. I kind of prefer it that way.
Just my opinion on these two.
DarkManX4lf said:
I ordered myself the matte black tpu from Diztronic.
Click to expand...
Click to collapse
thats my favorite diztronic color
SmokeRob said:
Nice quick review!
I gave both of these cases a fair go. Both of them I ran with for a week. I've decided to stick with my Diztronic TPU. Honestly. both cases are great.
Both cases are easy the slip in and out of pocket. Although slightly thicker, the Cruzerlite is still very slim. Does feel like it would offer a bit more protection in a fall. Since I have never dropped a phone my deciding factor, which might seem stupid to some people, is that the clear Cruzerlite case would get dust buildup from pocket lint and you'd visually be able to see it at the edges of the case. That can easily be fixed by purchasing a non-transparent Cruzerlite case.
The Diztronic case, my only problem with is most of the case fairly slick. What gives me a good grip on the phone is the rim of the case where you put the phone through. It's a different plastic finish from the rest of the case which is much easier to grip with your fingers. I kind of prefer it that way.
Just my opinion on these two.
Click to expand...
Click to collapse
Agreed. I think this cases are so similar but so different at the same time. Best part is that buying one of each won't hurt your pocket at all
Sent from my SGH-T999 using xda premium
I'll add my 2 cents even though I can't do an apples to apples comparison. I was never a fan of protective cases, I never used them with my Samsung Fascinate in the 2 years that it was my primary device. That was until the screen broke on my 3 month old SGS3.
While Samsung was repairing my phone, I did some research and decided on a Diztronic matte dark blue case. It's a great quality product. The TPU material is thin but pretty stiff and the fit on the phone is tight, removing the case causes the battery cover to get unsnapped 90% of the time. The cutouts are perfectly positioned (although I would actually prefer covered lock/power and volume buttons, read on). The matte finish actually makes the cover a little more slippery both in hand and when sitting on other surfaces, but I perfer the way the case looks. Also the case has a solid company behind it, when my case arrived, I noticed it the color was actually back and not dark blue. I emailed customer service at Diztronic and they let me know that their latest batch of dark blue covers were in fact darker than earlier batches. They sent me one from an earlier batch at no cost.
In the meantime, I acquired a CruzerLite gloss black case for my Fascinate. The TPU material is a little bit thicker and more flexible than the Diztronic. The case also fit looser than the Diztronic although there is no risk that the cover will fall off when being removed from a pocket like silicon cases. The lock/power and volume buttons are covered (raised and appears to be the same thickness as the rest of the case), but I had no issue using them. The cutouts are in the right places, but there is an extra cutout on the case on the side that does seem to have any reason for being there (maybe another phone shaped like the Fascinate has a use for it). The gloss finish is pretty sticky, especially when the phone is sitting on something smooth. I had no concerns leaving the phone sitting on the leather passenger seat in my car when driving. I would rate this case one step below Diztronic in terms of overall quailty, but will keep on using it as my Fascinate is now being used as a game system for my kids.
I also wound up buying a no-name TPU case (from Amazon) for a Pantech Burst I recently bought (from eBay). While the overall quality of the case leaves something to be desired compared to either the Diztronic or CruzerLite, it does have one feature I wish both the Diztronic and CruzerLite cases had. The lock/power and volume button on the case is covered, but the material in those locations is both raised and significantly thinner than the rest of the cover. IMHO this is the way to go for these buttons.
Hope this helps folks figure out which case to get.
I just got the Diztronic yesterday and I am quite pleased. Nice fit, nice feel, nice look. I even used the screen protector that came with it and it's not half bad.
Just dropping my 2 cents. The diztronic for the matte/clear model.. it gets rather dirty easily so if you happen to get your hands dirty regularly and need to use the phone. Just know the clear will start to change color.
arctic84 said:
Just dropping my 2 cents. The diztronic for the matte/clear model.. it gets rather dirty easily so if you happen to get your hands dirty regularly and need to use the phone. Just know the clear will start to change color.
Click to expand...
Click to collapse
Agree with this 100%. I used the case for 3 months then threw it away cause it got so dirty and ugly.
So after seeing pictures of it for a while and finally seeing peoples reviews for the case i finally bought the infinity white case. I already had a couple of ebay cases while i was waiting to get something a little more "premium" so i pulled the trigger on the Neo Hybrid. I received it today and have to say it is not what i expected.I already knew about the buttons being too sensitive and the case being more purple than blue so no surprises there, but being advertised as a tpu case i thought this would fit the phone much more tightly the way every tpu case ive ever bought off of ebay for $2 has felt. the tpu portion of the case was either made too large or from a different kind of material because it feels loose on the phone to me. the bumper that goes around the case is meant to keep the tpu tight to the phone, and perhaps add another layer of protection but it tpu along the front of the screen feels very loose and is even a bit sharp to the touch because of its square shape. this is the case i had been using for the past month and i loved the feel, but not so much the look of it. I actually couldnt decide which color i wanted and bought the orange one as well a couple of days ago and it looks like ill be sending them both back in favor of my $4 ebay case.
http://www.ebay.com/itm/Black-PC-TP...670415?pt=PDA_Accessories&hash=item1e6f7fe08f
Just a quick question, did you get the Neo Hybrid Lumi or the Color?
it was the color series with the purple/blue case and white bumper frame, now i have an orange lumi on order and i can only assume it is going to have the same feel to it. way more bummed about how loose the case feels and the way the rim around the screen is really jagged feeling and not rounded at all.
I've got an orange Lumi coming in today, I'll post anything if it disappoints. They looks so damn good in the pictures, especially with the white GS3. I just had to pull the trigger
King Shady said:
I've got an orange Lumi coming in today, I'll post anything if it disappoints. They looks so damn good in the pictures, especially with the white GS3. I just had to pull the trigger
Click to expand...
Click to collapse
the case looks nice but be ready not to use it or modify it so the buttons work. I already emailed them and sent pics in. The little bumpers are way to high so it causes the sensitivity to go through the roof
I don't have one yet but I am very disappointed in the colour selection. How can you not have a black/black like all the others before it? The old ones never sagged on me so I personally want a black/black with the good old silicon and polycarbonate frame.
Don't see it happening though.
SGP products suck in terms of "fit", I had an ultra thin air for my SII, the worst case ever, since then I decided not to purchase sgp again.
Case Mate for the win!!! Very recommended!!! Great quality and fit!!!
Sent from my GT-I9300 using XDA Premium HD app
misha25 said:
the case looks nice but be ready not to use it or modify it so the buttons work. I already emailed them and sent pics in. The little bumpers are way to high so it causes the sensitivity to go through the roof
Click to expand...
Click to collapse
I emailed them about the button issue too. They seem to know about it and said I'm getting an updated version of the Color in mid-August.
lsv-1 said:
SGP products suck in terms of "fit", I had an ultra thin air for my SII, the worst case ever, since then I decided not to purchase sgp again.
Case Mate for the win!!! Very recommended!!! Great quality and fit!!!
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
I ordered their leather pouch because I seriously loved their screen protectors. The pouch was so tight I had to use a razor blade to cut the seams to remove my phone. The pull tab broke off as I was trying to remove my phone with it.
i think theres something to be said for mass producing cases. all the generic ebay tpu cases seem to fit perfect, havent had an issue yet. they all fit nice and snug, cutouts are perfect, the buttons arent as tactile and clicky as more expensive cases but theyre still easy to press
I agree with the OP, I got the neo hybrid lumi in green and I think that this case just feels cheaply made, this is definitely not worth paying $26. My cheap tpu case I got off eBay for 3 bucks is 100 times better than this. The camera cut off holes for this aren't even properly aligned and the case does not fit the phone very well. And also with the issue with the buttons. I highly suggest that no one should buy this case. It's a terrible case and cheaply made and over priced. I'm disappointed with the way this case turned out. I put a bad review on SGPs website to warn other buyers but they would not even post my review. Screw you SGP lol
Sent from my SGH-T999 using xda app-developers app
Was waiting for a review like this... really unsure if to order it.
How bulky is it in comparison to the Incipio Sillicrylic? I can't decide between the two.
Yonatanl2 said:
Was waiting for a review like this... really unsure if to order it.
How bulky is it in comparison to the Incipio Sillicrylic? I can't decide between the two.
Click to expand...
Click to collapse
I highly suggest you go with the incipio case. The Sgp case is not worth it.
Sent from my SGH-T999 using xda app-developers app
Hey Angie have you had any other cases for your gs3? If you notice while the case is on the phone the bit that runs around the edge of the screen can be moved very easily. The band is what makes the case stick to the phone and difficult to take off. My dislike is with the actual tpu case. Which is much more flimsy and soft than most tpu cases
no the band is the only thing that fits the phone well, im referring to the bit on tpu that sticks out past the band around the edge of the front glass, if you nudge it at all its very lose and also is very angular and uncomfortable to touch
angie4u said:
that is so weird because i have no issues with the cameras and holes not aligning with the cutouts, as you can see from the pictures. And the fit is very snug. This is my first SGP case purchase so did I just get lucky? I haven't use the Incipio so I cant compare the two but in terms of bulkiness, I don't find this to be bulky at all. it's very thin and sleek. However, if you are looking for something that's very durable, this might not be the case for you.
Click to expand...
Click to collapse
Yeah I think you did get lucky, because the cut out on mine was not even centered like how it is with yours. The holes on mine came down more to where the camera, lights and speakers are. And in the front, the top part of the tpu covered the silver bezel but hardly covered the bottom part. Close enough to where it looks like the tpu was sagging. I was so pissed that I literally wanted to cover the case in gasoline and burn it for how ****ty, it was lol. I honestly think that the feel of the case just feels so cheap. I have a few other tpu cases I purchased on eBay at a much cheaper price that felt more of a high quality than that piece of crap that sgp made lol. But alas, I returned it back to sgp with an e-mail stating that they did a piss poor job with the case lol.
Sent from my SGH-T999 using xda app-developers app
I guess I'm another of the lucky ones. My cutouts fit perfect, and I have no issues (besides the whole oversensitive buttons issue) but I can relate to the whole "looseness" thing.
As far as TPU cases go, the NeoHyb is definitely not cut to be "tight-fitting" like the some of the other TPU cases I've seen. Without the band, the TPU base IS loose fitting.
With the plastic band though, the entire assembly is tight enough that any attempts to pull it off usually takes the battery cover along with it.
Also, the TPU is more pliable and softer then most other TPU cases I've seen, which makes the "loose" feeling even worse, but I take it it's made that way for better impact absorption.
It's definitely not soft and stretchy like silicone though, which I hate.
So, is the NeoHybrid a perfect case? No. The plastic band is too thin, too slippery. The TPU back is not rough enough. The buttons don't really work without modifications. The TPU rim around the screen, as the OP said, feels "sharp" enough out of the box to be slightly uncomfortable.
Yet, for some God forsaken reason, I like the bloody bugger and I think 20 odd dollars is a fair price for it - considering I've dropped the phone a couple of times already and the case has been doing what it's paid for with aplomb.
YMMV though.
I DO have the Incipio Faxion - another TPU/Polycarb hybrid case I've seen out there - on order though, and plan to do a comparo as soon as it arrives.
Considering I got both at around the same price, it should be an interesting comparison.
I think people are being unreasonable here. This case isn't supposed to be as hard as other TPU cases. That is why there is a polycarbonate hard frame. The whole design philosophy of the Neohybrid is super soft inside with hard shell structural support. I am glad they went for the silicon feel.
The capdase soft jacket feels basically like silicon for anyone going for that type of case. The modello is quite hard by the way. Almost as rigid as a hard snap on shell.
Tomatoes8 said:
I think people are being unreasonable here. This case isn't supposed to be as hard as other TPU cases. That is why there is a polycarbonate hard frame. The whole design philosophy of the Neohybrid is super soft inside with hard shell structural support. I am glad they went for the silicon feel.
The capdase soft jacket feels basically like silicon for anyone going for that type of case. The modello is quite hard by the way. Almost as rigid as a hard snap on shell.
Click to expand...
Click to collapse
Doesn't feel super soft to me.
Sent from my SGH-T999 using xda app-developers app
angie4u said:
did you check if the reseller was selling genuine SGP product? because i almost got a GLAS.t screen protector from a site that was selling it like.. $8 cheaper than SGP but I wasn't sure so I emailed them.. they told me they were fake. maybe it was poorer quality because it was imitation.. but it boggles my mind why anyone would want to imitate $30 items...
Click to expand...
Click to collapse
I ordered it straight from SGP when they were doing the pre orders. So I'm pretty sure it's genuine unless they're lying and are just making some fake products. They gave me my money back though so it's all good. I'm pretty sure those cheap imitations probably turned out better than their genuine product lol.
Sent from my SGH-T999 using xda app-developers app