just curious if there's an app or mod out there that allows you to dim the LED flash on this killer phone? i like using the flash when shooting video but it's so bright it makes it difficult to look into the camera without being temporarily blinded.
or am i being a wuss?
agreed
you aren't being a wuss. I was actually wondering this same thing. God forbid you shoot video at night - everyone hates you or goes blind...
You could go to anywhere you buy cameras and look for a diffuser. It would stop it from blinding you but you'd have to rig it to the phone. I've actually used a piece of scotch tape as a makeshift diffuser before and it worked beautifully. Just gotta be careful not to cover the lens.
Related
Hey Guys....thanks in advance for any replies...
Can anyone give me some tips on how to take decent pictures with the Evo? In most cases I am taking pictures in dimly lit restaurants or bars (no comments please, heh heh) and most of the time the pictures are completely washed out due to the flash coming on and lighting up the subjects faces like a Christmas tree.
Does anyone know if there are settings, other software or any other tips that can be used to help me take better pictures??
Thank you!
From the camera app,there is a tab on the left side in landscape mode. If you slide it open, choose settings, then brightness a slider will open. I've found that in dim to dark conditions, best results with flash on are with the brightness set to around -2.
Sent from my PC36100 using XDA App
Theres an old photographer's trick, not the most elegant of solutions but putting a piece of scotch tape over the flash will help diffuse the light and also get rid of the harsh shadows from the flash.
bluehaze said:
Theres an old photographer's trick, not the most elegant of solutions but putting a piece of scotch tape over the flash will help diffuse the light and also get rid of the harsh shadows from the flash.
Click to expand...
Click to collapse
Honestly this has started to cross my mind too. The two flashes 'sounds' like a good idea...but they are WAY TO HOT for a close up (within 6 feet or so). Now they did actually work pretty well at dusk for a test shot about 12 feet away. (So that should tell you they are too bright for close work)
I am thinking of maybe taping just one and testing.
But you could use scotch tape as posted, because the frosted look of the tape would help diffuse the light. (Remembering it will diminish ability to flash far away.)
Have to start treating this more like cameras now...they are going to require more than point and forget.
Idea
I asked the same question a few weeks ago - why doens't the EVO do light metering.
One though would be to use a LED application to turn on the LED light - maybe on low, and don't use the flash on the camera application? I know a pain to do (and a loss of coolness points) but might work?
if you really want to be photo savvy go to a photo store and get a sheet of diffusion gel, and just place a small cut out in between the flashes and the battery cover. also always shoot as low as you can go with the ISO, the problem with the EVO camera is that when in low light situations it switches to a high ISO, but it doesn't factor in the fact that the flash is going to go off, so when the flash goes off, the high ISO coupled with the strong flash means super overexposed picture. so either leave the camera at iso 100 or 200 and try shooting that way or try the diffusion i stated earlier.
the camera is just very badly coded. for instance what the camera should be doing is lighting the flash to focus, read exposure and compensate, then take the picture with the proper level flash. as it is now all it does is try to focus completely in the dark, then just flash the flash at full power while its taking the picture. it really is a terribly coded camera.
its like the people over at HTC basically just added the lcd's just to add them, i mean we already know that the LCD can be used at various levels of intensity...its a damn shame...
Are there no apps out that improve the cameras function? i figured there would be.
There's only one issue that I have with the Incredible, and having owned one since launch that's not too bad. In low light to no light the camera flash is too bright for close up shots. If there's any sort of reflective surface in the shot it always lights it up to the point you can barely make out what's in the picture.
So with that being said, has anyone ever seen or heard of an app or a way to dim the flash when taking a picture? I know that with the leaked 2.2 the included LED Flashlight app there are 3 different brightness levels, so obviously you can control the LEDS. Is it possible with the camera?
I second that... I have the same issues. THey should let you adjust it.
I read in a post somewhere where somebody put a piece of toilet paper over the flash to dim it. I've never tried it, but you can give it a shot if you want!
Regards!
I was applying my tempered glass screen protector and after everything was done, I did a thorough check to realize that my laser sensor has hairline scratches. Will it affect the focus or performance? It's my first LG phone..
Thank you in advance!
My laser appears to have a few tiny scratches as well.
Highly doubt it will hurt anything. My g3 laser was scratched up and it seemed fine.
I was thinking of polishing the plastic and applying a film protector to get it protected. Any idea if a film would affect the focus? Thank you for the reply.
Sent from my LG-H815 using XDA Free mobile app
Anyone got preventive measures to prevent laser focus plastic cover from getting scratches further? Mine is quite scratched up and I'm pretty annoyed by it. I believe it won't affect the focusing speed but it's a flagship phone from LG and yet such thing happens..
Sent from my LG-H815 using XDA Free mobile app
The laser cover is soft, cheap plastic. Nothing you can do about it. No, it won't affect the focusing unless you put a giant gash in it that will deflect the beam. Same thing was happening on the G3. Just be careful about it.
---------- Post added at 14:02 ---------- Previous post was at 14:02 ----------
brysonwong said:
Anyone got preventive measures to prevent laser focus plastic cover from getting scratches further? Mine is quite scratched up and I'm pretty annoyed by it. I believe it won't affect the focusing speed but it's a flagship phone from LG and yet such thing happens..
Sent from my LG-H815 using XDA Free mobile app
Click to expand...
Click to collapse
Polish it with ABS polishing compound, then put a drop of optical hard lacuqer on it. More trouble than it's worth, IMHO.
Although LG brands it as "laser" it's nothing more than a ray of infrared shot and measured after it bounces off obstacles. So unless the emitter/receptor is REALLY weak, there will be likely no effect on the focus.
Double that with the fact that the camera uses both the "laser" and phase detection to focus, if the "laser" fails to provide focus information the phase detection will do (slower).
Think of it that way: Do you care that much about the scratches on your TV's remote infrared emitter?
Don't worry, your "laser" is fine
AnteusFogg said:
Although LG brands it as "laser" it's nothing more than a ray of infrared shot and measured after it bounces off obstacles. So unless the emitter/receptor is REALLY weak, there will be likely no effect on the focus.
Double that with the fact that the camera uses both the "laser" and phase detection to focus, if the "laser" fails to provide focus information the phase detection will do (slower).
Think of it that way: Do you care that much about the scratches on your TV's remote infrared emitter?
Don't worry, your "laser" is fine
Click to expand...
Click to collapse
I don't think you really know what a laser actually is.
The whole point of the laser-assisted autofocus is to project a tightly focused, coherent beam of light shining in a single direction so that it reflects off the photo subject and nothing else. A non-laser IR diode projects light in a "cone" in all directions, which is useless for focusing the camera. It is a laser by all means, otherwise it would not work at all.
Scratching the cover might diffuse the beam slightly but only a major gash will actually impair it to the point of uselessness (since it will scatter the light in many directions).
Here's a more thorough explanation: http://www.androidauthority.com/lg-g3-laser-auto-focus-386896/
siraltus said:
I don't think you really know what a laser actually is.
The whole point of the laser-assisted autofocus is to project a tightly focused, coherent beam of light shining in a single direction so that it reflects off the photo subject and nothing else. A non-laser IR diode projects light in a "cone" in all directions, which is useless for focusing the camera. It is a laser by all means, otherwise it would not work at all.
Scratching the cover might diffuse the beam slightly but only a major gash will actually impair it to the point of uselessness (since it will scatter the light in many directions).
Here's a more thorough explanation: http://www.androidauthority.com/lg-g3-laser-auto-focus-386896/
Click to expand...
Click to collapse
I know very well what a laser is, thank you very much
http://www.anandtech.com/show/8062/a-closer-look-at-the-g3s-ir-laser-auto-focus-system
A "perfect" laser would be actually counter-productive, for unless you have a sort of "crosshair" on your viewfinder to mark the focusing point, you may very well have your phone focus on the tree behind your beautiful significant other, just because your subject is not in the laser's line of sight.
It is actually necessary for this concept to work that the beam is conic. Here, see this image from LG's own keynote: http://androidspin.com/wp-content/uploads/2014/05/LG-G3-Laser-Autofocus.png
If it was a super-focus laser, would they represent it as a conic, albeit very narrow, beam?
They don't need a "perfect" laser emitter to work out their concept. Granted, they need a narrow beam to avoid interference and allow an accurate measure of the scene being captured but a perfect laser beam (perfectly coherent, single direction light) would just do more harm than good. This is not used for sniper rifle or whatever, it's used for focusing on a scene.
Scratches will maybe deviate a portion of the beam a little but the majority of it, unless the window is completely buffed, will still serve its purpose. I'm strongly guessing that the way it works is: Send a burst, receive reflectionS (plural because there will be more than one) and apply some algorithm that'll define the most appropriate distance to focus on, based on the collection of durations from the receiver.
So I have a question on this topic. Since its supposed to be infrared, on a remote, you cant see anything being emitted unless you look at the emitters through a camera or something. When I have my camera on my G4 on, I can see a tiny red red light shining. Can anyone else actually see the red light being emitted? Just making sure mine's not defective.
rustypie said:
So I have a question on this topic. Since its supposed to be infrared, on a remote, you cant see anything being emitted unless you look at the emitters through a camera or something. When I have my camera on my G4 on, I can see a tiny red red light shining. Can anyone else actually see the red light being emitted? Just making sure mine's not defective.
Click to expand...
Click to collapse
I can see it too. Very much like you can see the IR emitter of your TV remote, except it's more focused here so even more noticable. Your device's fine
More on why we can "see" infrared in certain conditions even though it's out of the visible spectrum: http://phys.org/news/2014-12-human-eye-invisible-infrared.html
You'll notice that the "laser" is pulsing rapidly, which is the required condition to trick the eye into "seeing" the beam.
Okay, so I know no one likes the look of themselves when they catch glimpse of their face in selfie mode when you first open an app like Snapchat or front-facing cam is already activated when you go to take a pic etc, but, wow, I feel like a monster when I see how I look using the Note 7.
Arm fully stretched out and the pics/video look great, but why is it so disgustingly distorted up close? My head looks so long and weird. I know front-facing cams have always had a little distortion, but I've never experienced it this bad before (coming from 9 years of iPhones and brief flings with a Galaxy Note 1 and a LG G3).
Can anyone explain why? Will any of us have an ounce of self-esteem left after a few weeks of use?! lol
Sorry to say but you might just be ugly.
If i recall correctly there's a "beauty" setting that change the way your face looks, maybe it's on and you just don't like how it changes it ?
cadcamaro said:
Sorry to say but you might just be ugly.
Click to expand...
Click to collapse
You should be a comedian dude.
Shoubyy said:
If i recall correctly there's a "beauty" setting that change the way your face looks, maybe it's on and you just don't like how it changes it ?
Click to expand...
Click to collapse
Don't get me wrong, holding the phone with arm fully extended to take a selfie produces great results (with or without settings changed). I'm talking about when it's close to the face. The lens makes things look really out of shape. Never seen anything like it on a phone before.
musicconnect said:
You should be a comedian dude.
Don't get me wrong, holding the phone with arm fully extended to take a selfie produces great results (with or without settings changed). I'm talking about when it's close to the face. The lens makes things look really out of shape. Never seen anything like it on a phone before.
Click to expand...
Click to collapse
I think because it is a wide angle lens so the edges of the camera lens makes you look a little weird. That's less so the case with the portion of the image that's more centered. Is the entire image distorted or only the edge portion of it?
mines super wide to what im accustomed too. Looks silly
Try to put your face in the middle of the camera, not near the edges.... Everything near the edges will look a little distorted since the camera is spheric and the image is a square, so thats just a weird effect.
When you use other apps that take 4:3 pictures you won´t notice this distortion because you are not using the edges of the camera, it will only happen in 16:9 pictures.
Basically every phone nowadays. Every one wants a wider selfie camera but don't realize wide lenses have a big byproduct. DISTORTION.
EVERYONE WANTS A WIDE ANGEL CAMARA. NOT SURE YOU KNOW EVERYONE, but if that was true then every one is an dumb *as. Wide angel is for scenery to shoot landscape not to point at once face and look like a blower fish.
My phone is useless with this wide angel camera and the idiots at Google messed up since the camera app was supposed to correct the image but doesnt work. SO we should be asking for a recall and a refund, but we are so stupid that we just deal with it. THis is a defect people. I have go pro with wide angel camera and my face doesnt look like long or fat head. COMPLAIN PEOPLE AND GET A REPLACEMENT OR A YOUR MONEY BACK> I"m a professional photographer, so I'm telling you. You all got scammed
Is anyone having camera issues?
For whatever reason, when I try to take a photo of my dog, the face looks smeared. Roughly 80-90% of the time. While on my iphone it looks great...I'm kinda bummed out about this and wondering if this is either an issue with my unit, or if this is a common thing with Samsung.
Also, just for some more info, I've tried turning on/off hdr, scene optimizer, and whenever I am ready to take a picture, it looks stunning. Then I hit the shutter button, and it turns out like poop. Barely half the quality of what it looked like before I hit the shutter button.
Here are two pics to compare so you can see what I mean. If anyone has any info regarding this please let me know, thanks.
Samsung
Iphone
resetoriginal said:
Is anyone having camera issues?
For whatever reason, when I try to take a photo of my dog, the face looks smeared. Roughly 80-90% of the time. While on my iphone it looks great...I'm kinda bummed out about this and wondering if this is either an issue with my unit, or if this is a common thing with Samsung.
Also, just for some more info, I've tried turning on/off hdr, scene optimizer, and whenever I am ready to take a picture, it looks stunning. Then I hit the shutter button, and it turns out like poop. Barely half the quality of what it looked like before I hit the shutter button.
Here are two pics to compare so you can see what I mean. If anyone has any info regarding this please let me know, thanks.
Samsung
Iphone
Click to expand...
Click to collapse
I have always seen this happen on Samsung phones (S8, S9, and S10) when taking pictures in certain lighting situations. Especially inside when taking pictures of a rug or anything slightly fluffy. It is as if it is trying to apply the beauty mode to everything.
Try to get the AF to lock on to the animal's eyes.
A good pro cam can most times; it's a small but high contrast target.
-If you don't grab the eye(s) you lose the shot-
I haven't done any research how this cam's AF works; normally you would point focus AF although it may still target the hair as it's a high contrast target too.
There are a lot of high contrast targets in this shot, the dog's nose, that chair, the dog's hair and the floor boards. Try to limit potential AF targets by keeping the composure simpler and less cluttered with high contrast targets if you intend on capturing a face with the eyes in focus.
Getting closer to the subject makes an AF lock on the eye more likely. Try punching up the yellow focus/tracking square.
Worse with this cam's large aperture it makes for a shallow DOF which means a spot on focus is needed. The aperture setting is fixed so you can't stop it down to something reasonable like f/5.6 however this cam is sharpest at it's fixed aperture. Backing up therefore may help get more of the subject in focus. You need to learn to see through the camera's eye, as it sees rather than your eyes.
It is much more limited than the superb human visual system...
Manual focus is sometimes the only sure fire way to do it. In the pro mode it does have manual focus but lacks the smooth ring control of a good piece of glass found on stand alone cam systems.
A trade off... it's only a smartphone.
First, nice looking dog.
A couple of questions.
What were the lighting conditions?
Was your dog moving?
Sent from my SM-T727V using Tapatalk
Samsung applies way to much noise reduction destroying the details of a photo. This is why it appears like that. Also, there's nasty shutter lag with the stock cam...so you press the shutter to take the pic but it doesn't happen right away simply because hdr is always on no matter if you have the switch off or not. Basically Samsung have rendered there stock camera useless. Get the latest GCam port from arnova....all problems solved.