Does any one know if there is a pure carbon fiber case for S2 available? Search in google and almost everywhere and cant find. Not those carbon fiber look or skin, but a real carbon fiber case.
Is it really that hard to find one?
Given that there's no noticable weight advantage between CF and plastic on something that small, and the strength factor is a non-issue, there's probably not a lot of demand given the huge price an actual CF shell would cost.
A CF shell would probably have to be thicker than many alternatives (such as the genuine OEM case or the Casemate ones) due to the resin component.
Related
Looking for a leather pouch type case with the following features:
-Magnetic closure.
-No belt clips on the rear, this will be for sliding into my pocket only.
-Durable non glossy finish.
-Soft microfiber interior.
-Able to fit E4GT with Skinomi carbon fiber skin applied to it.
I had this one for my iPhone 4S and loved it:
http://www.monoprice.com/products/p...=10831&cs_id=1083111&p_id=8561&seq=1&format=2
I have looked everywhere for a similar case and can't find it. Any suggestions?
try this site. I haven't looked for the ET4G case on here yet, but some of these cases are pretty similar in size, so you may be able to get away with a different version of the SG2
I've had these cases for other phones and although they may be expensive, they are very durable. They are hand made , leather and have the microfiber interior. You can customize them too (belt clips, rings, pen holders, flaps, etc)
http://tuff-as-nuts.com/
Good Luck
Hi,
My friend showed me his iPhone case, and it was some sort of hard-ish rubbery clear stuff that doesn't get caught when you slip it into your pocket, etc.
I can't remember the name of the material, but it felt really nice and I really hope there is a version of it for the sgs2. Anyone got any ideas?
Thanks
The sticky, "traditional" rubber material is silicone, AFAIK.
The "modern", non-sticky material is called TPU, an abbreviation for Thermoplastic polyurethane.
You should find plenty of those cases on eBay or other platforms.
cold_reading said:
The sticky, "traditional" rubber material is silicone, AFAIK.
The "modern", non-sticky material is called TPU, an abbreviation for Thermoplastic polyurethane.
You should find plenty of those cases on eBay or other platforms.
Click to expand...
Click to collapse
yes there are very cheap and good quality tpu cases, look for "s line" cases on ebay, are really well-made
I got this case for my S II and its nice. It fits perfectly and it feels nice.
And my S II is kinda safer now
http://www.ebay.com/itm/Blcak-Color...361850?pt=PDA_Accessories&hash=item3cc2bf68ba
Houselegend said:
I got this case for my S II and its nice. It fits perfectly and it feels nice.
And my S II is kinda safer now
http://www.ebay.com/itm/Blcak-Color...361850?pt=PDA_Accessories&hash=item3cc2bf68ba
Click to expand...
Click to collapse
Looks nice, But doesn't that make your slim SGS2 a bit thick ?
I recommend the Incipio NGP. One of the most solid cases I've ever used and not overpriced.
+1 for the Incipio NGP
Try this, very good case for S2
http://www.momax.net/en/Product_Show.aspx?ID=1475&T=1
My second case was a white TPU case on my black phone, looked really good but after a while started turning blue from the dye in my jeans haha. So I bought another cheap TPU case from amazon, this time a clear but smokey black, looked really nice on the phone and didn't change colour.
The material I was thinking of was polycarbonate. I could only find a few that apparently use the material, and ended up buying an SGP case (on ebay here). I think its also available at www.sgpstore.com, because the box it came in had that link on it.
It's quite durable imo, nice and thin, doesn't take away from the sexiness of the sgs2. Overall it is one of the better cases I have bought.
Edit: it looks like it's just a cheap chinese rip-off of the sgp ultra-thin case. Found it cheaper here. Oh well, I'm happy to pay $5 extra if it comes in 2 days
I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Personally I like the Leather style flip cases, The one that doubles up as a wallet.
http://www.ebay.co.uk/itm/BLACK-WAL..._MobilePhonesCasesPouches&hash=item3374db7913
I would never pay more than £10 (delivered) for a case.
in terms of slimness i've basically narrowed it down to two giants.
1. sgp ultra thin
2. casemate barely there.
not sure which ones better but from what i can tell they're pretty much the same, both at a hefty 25 bucks.
anyways, i'm in the same boat as you. XD
not sure which case to get.
vipfreak said:
I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Click to expand...
Click to collapse
I have the rearth and it is very slim, the only down side it is a beeeoootch to take off (i have a dock/charger for the phone) and if you take it on and off a lot it cracks and the part closet to the usb port cover, nothing earth shattering it actually makes it much easier to take the case off - that and the sgp ultra clear and it is almost like having nothing on the phone at all.
I have used diztronic cases for the last year (for my SII and now my N7000). They are very similar to the boxweave case you posted.
http://www.amazon.com/Diztronic-Fle...0386413&sr=8-3&keywords=diztronic+galaxy+note
As you know TPU protects like a silicon case but doesn't stick in your pocket or collect lint and dust due to it not being "sticky" feeling. I recently sold my SII for over $300 after 8 months of daily use because my SII was in perfect condition as a result of being in a diztronic tpu case. No, I never dropped the phone on cement or anything but I dropped my SII on the carpet from 5+ feet and the phone was unchanged when I picked it up. Didn't pop out of case or battery, etc. Because the tpu cases have a 1/8 or so "lip" on the front they also allow the phone to be placed face down on flat surfaces. IMHO and experience, a good tpu case is all you need to fully protect your phone unless you work in construction or somehow expect to drop it on cement.
So, my vote goes to the boxweave or diztronic cases. BTW I got 2 diztronics for $14 from amazon, the black matte and smoke matte. Great deal!
^I'm actually thinking of getting a real cheap TPU case like that I can mod. My ideal case is a TPU Bumper, maybe the Boxwave Black out without the back part but have the vol and power buttons cut out. I guess it's just not feasible so far... ?
Anyway, Thanks for the input so far guys, keep it coming.
bumper TPU from Amazon
I'm actually thinking of getting a real cheap TPU case like that I can mod. My ideal case is a TPU Bumper, maybe the Boxwave Black out without the back part but have the vol and power buttons cut out. I guess it's just not feasible so far... ?
first post here,
I have one of these.
search amazon for bumper cases.
I'm not allowed to post urls.
I like it, I have it on right now. What I have is different from what's
in the pictures. No cutouts for the buttons and the other cutouts are not
as big. The covers of the buttons are pretty sensitive, unlike the covers
for the Boxwave type which I got from Hongkong for 2 bucks.
Check amazon out, they have a lot of cases.
I also have the elago Breathe case, I love them I have two.
I ended up taking my chances on this. I guess it's going to be as close as I get. Thanks everyone, I'll let you know how it is when I get it.
vipfreak said:
I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Click to expand...
Click to collapse
I have the 3 of them
Go for the Rearth Ringke Slim , is THE BEST OF ALL !!!
Hi all, I'm in a similar dilemma.
I've got a choice between these two:
https://www.gearzap.com/media/catalog/product/3/4/34484-2.jpg
and
http://www.ebay.co.uk/itm/HYBRID-SI...lePhonesCasesPouches&var=&hash=item416682f7b6
I know I should pick the Zenus, but would the inside bit that holds my phone scratch the outer bezel? And since the hybrid one has a silicon case THEN a hard outer shell I figured it would be good too. Any ideas?
Thanks!
I use a an SGP Ultra thin. Comfortable case. Considering the size of the phone the case is great. Merges with the Phone. +1 anytime.
I ordered this one http://www.ebay.co.uk/itm/160732471512?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649. It has a stand that works in both axis.
good
Nice
I just found a great case for my S3. Prior to this I'd used a cheap TPU case from eBay, the Case-Mate Tough Case, a Spigen case, and the Hyperion TPU Honeycomb case with extended battery. I'd pretty much settled on the Case-Mate Tough Case, but wasn't too pleased with solid black. When I saw this case online, it seemed too good to be true, but I ordered one anyway. The white TPU/black carbon fiber combination looked good and I liked the flared corners.
The only flaw I see with this case is that it doesn't fit quite as snugly as the Case-Mate Tough. It stays on better than the Spigen, but can't match the two-piece construction of the Case-Mate. It isn't loose, however, and the case seems to offer plenty of protection, especially with my Invisishield Extreme screen protector. In fact, I liked the case so much I got over my anguish at not having the financial werewithal (meaning $$$) to pre-order the S4.
Doesn't "Tiffany" look great in white?
It looks like a nice case... Although it's too bulky for my likings.
Sent from my SGH-T999 using Tapatalk 2
Hello. I wanted to ask what are your preffered cases for this device?
I'm currently looking for a waterproof/dustproof case, hopefully one with an integrated screen protector. But that's just me. What about you? What cases have you tried? What case do you have now? What are some of your favorites?
I'm a long time fan of Spigen. They make two cases for the Xperia 10 III, a black "rugged armor" case and a transparent "ultra hybrid" case. I have the transparent one, the buttons are very good and the cutouts for cables are very wide.
They also make a tempered glass screen protector, Spigen Glas.Tr but for some reason it seems availability varies by region. It's available on Amazon DE and in local shops in Eastern Europe (example) but not on Amazon UK or .com. I normally use the hinge method for applying the protector but the included applicator frame was pretty cool and it worked even faster.
My other usual choice for cases is Case-Mate, they also make high quality stuff, but unfortunately they don't support Sony phones.
So far I've only found one seemingly good rugged case; but no port covers and understandably, no screen protector.
https://www.amazon.com/dp/B091YQY2PR/?psc=1 <- This seems to be a somewhat generic one, as I saw another brand selling the exact same case
I used to like rugged cases (polycarbonate+tpu/silicone gel), but I'm now using a very slim aramide fiber one I found on AliExpress, I really love it (and it is real fiber not molded plastic)
I like the original Sony case that came with my device.
https://www.sony.com.hk/en/electronics/accessories/xqz-cbbt
However, I have no comparison to other cases and it's not waterproof/dustproof.
matmutant said:
I used to like rugged cases (polycarbonate+tpu/silicone gel), but I'm now using a very slim aramide fiber one I found on AliExpress, I really love it (and it is real fiber not molded plastic)
Click to expand...
Click to collapse
Do you happen to know their names? Or maybe links?
psychofaktory said:
I like the original Sony case that came with my device.
https://www.sony.com.hk/en/electronics/accessories/xqz-cbbt
However, I have no comparison to other cases and it's not waterproof/dustproof.
Click to expand...
Click to collapse
OEM case best case