I just got my Captivate Glide and thought it needed a case. I ordered the "Hard SnapOn Phone Protector Cover Case FOR Samsung CAPTIVATE GLIDE i927 Smoke" on eBay for around $5.
The case itself is in two pieces. It attaches to the phone by having some edges clip to the phone. I like the design and it looks pretty good. The case fits well and the cutouts for the connectors/buttons/camera are decent. You always an option to leave the top piece off if you want.
You might have an issue with the hardware keyboard with the top piece on, because it pushes the usable area for the top key row back a little bit, but I didn't mind it much.
Overall, I'd recommend this one if you're looking for a plastic case. Now all I need is a screen protector.
Does that case increase grip? Shouldn't any screen protection for 4" screens work?
The back of the phone without the case has some texture to it. This case doesn't though, it's clear plastic. It will add some more millimeters around the phone so you might consider to have more grip in that way.
Yeah, I could look for any 4" protector, but I've seen ones that have the cutouts for the speaker and front facing camera.
Try the iFrogz sold with the AT&T logo. Wrote something about them at the Accessoires section. If you have a steady hand, I think they are very good.
The rubberized cases have a quite good grip. Also buyable at ebay or Amazon or other dealers.
For those interested, here is my OTTERBOX COMMUTER vs CASE MATE TOUGH comparison. I now own both of these cases and found some interesting differences.
OTTERBOX COMMUTER
+ Very solid case 9/10
+ Rubber has extra cushioning bumpers on corners to better protect against drops
+ Cutouts also have secure plugs to prevent dust and water from intrusion
+ top, bottom and sides have hard plastic protection over the rubber making a more secure fit all round.
+ Rubber is of a higher quality 8/10
- Sound quality of speaker phone is slightly affected by the raised plastic that sits closely around the speaker. Sound comes out a little louder and sharper but still sounds fine.
- Case can be quite difficult to remove because the plastic cover sits over all four sides and is very tight
- Plastic cover surface is very smooth and nicely designed but will be slippery with oily or sweaty hands
- Screen protector cutout is a little short near the top where the earphone is compared to other screen protectors I've used, but quality is fine, average.
- headphone and charging ports are a little smaller than I'd like but should fit most accessories.
- ON and VOLUME buttons are a bit difficult to press, quite like most TPU cases
- Having plastic covering on the front sides, it can be easily knocked off a table when sitting face-down, and back down is even worse.
CASE MATE TOUGH
+ Very solid case 8/10
+ headphone and earphone ports are a perfectly cut to fit all brands.
+ Very easy to remove with only sides covered by plastic cover
+ Plastic material has excellent grip on sides and back making it much more secure in the hand.
+ Plastic is less likely to show scratches over time
+ Quite easy to remove with only the sides cover the the plastic cover.
+ ON and VOLUME buttons are very easy and nice to press, with perfect feedback, almost a little 'too' easy actually.
+ The entire front is rubber, so when sitting face-down, it does not move and has a secure grip on surfaces, less likely to be knocked of a table etc
- Because the plastic cover only sits over the sides, the top and bottom have the rubber exposed and it could catch on things, such as removing from a tight pocket. not a huge deal in use.
- headphone and charging ports are open and exposed.
- rubber is a little thinner than the Otterbox's and more stretchy/flexible, though may not be a big deal in use/drops.
So in conclusion, I really like both cases for different reasons. At first impressions, the Commuter appears to be the better case due to it's port covers, more secure fit with plastic covering all sides and the extra protection given to the corners of the case.....BUT....
....the Tough case just feel better in the hand, more secure. While both are almost identical in size, thickness and weight, the Tough has a nicely textured hard surface (that looks like rubber in photos) and this is what I would call 'active' protection, compared to the passive protection on the Otterbox. What I mean is that the Commuter is more likely to slip out of the hand, but be better against drops, and the Tough case is less likely to slip out of your hands, but make be less effective against drops. Also with the Tough case having rubber all the way around on the front, it's rock solid when sitting face down on a table surface and less likely to be knocked off.
Also, if you like to change your case on a fairly regular basis, the Otterbox is not an easy case to remove. Not that difficult, but the Tough is about 3x easier. This is a big deal for me, and combined with the nice secure feel, the Case Mate Tough is the preferred case for me as a daily wearer. If there are days where I feel I may need some extra protection against, say rain, I may be a little more inclined to throw on the Otterbox Commuter.
Either way you can't go wrong as both are great cases.
leicashot, any chance of any piccies with the Galaxy in the commuter case ? I'm thinking of getting one for my shiny new precious !
Also, do you have a car holder of any type that fits with the commuter on it ?
Do provide pics of these two cases if possible...
Interesting! I always wanted to compared them, but I dont wanna buy those cases because I know i would never use them after.
abhifusion said:
Do provide pics of these two cases if possible...
Click to expand...
Click to collapse
Will try take some pics later today....
do these cases come with screen protectors or no?
My tough case did not come with a screen protector which is fine by me since I hate them. Bout all I can say is that I had the tough case on my sgs2 both of which I got when they came out (each respectively, the case followed by a week or two) and have no complaints about it. Phone lived through a few drops one of which was standing in the back of a pickup to unload stuff and it fell out of my pocket onto the pavement, some 6 or 7 feet I would guess. The phone was fine and the case showed no mark whatsoever. I have not had any issue with the rubber on the ends sticking to anything and it does not pick up lint. The phone is easy to get in and out of the case but still completely secure in it and wont come out unless you take it out. The case has no movement on the phone and feels solid. The texture on the case is just about perfect for grip and more has an undefineable "good" feel. The ports and all openings line up perfectly with the headphone and microusb ports being opened up a little extra to let larger based headphone jacks or usb cables fully insert to their base. Something I appreciate because I have some headphones that sometimes wont go in without trimming the case.
To be honest I only see one real downside to this case and its going to come down to preference. If you want your phone as slim as possible this case isn't for you. The lip around the top is probably near two millimeter by itself and while it fits like a glove you have the width of both the rubber and case across the bottom and sides. To someone like me its a win because I think modern phones are too thin and I would want to do something to bulk them up even if I didn't need the protection.
I considered the otterbox to try something new but did not. I have no beef with it and it seems like folks that have them like them but for me it was hard to get away from something I knew worked great and for which I had no gripes.
I have a Case Mate tough too and i realy like, i used it on all my phones i had.
Here are some pics http://www.case-mate.com/Samsung-Galaxy-S-III-Cases/Case-Mate-Samsung-Galaxy-S3-Tough-Cases.asp.
Never had the Otterbox but it looks clunkier and bigger, the Case Mate is a bit more elegant and has a good grip and feel.
Do any owners of either case use them in car holders at all ? If so any chance of pics in the car holder ? Also, does the case interfere with the operation of NFC at all ?
Hey guys,
I have the CaseMate Though since last week when i got my S3.
Before that I had the Otterbox Commuter on my DHD and I must say, I like the CaseMate much better. It may does not protect the ports as already said, but it does feel very good in my hand.
Car mounting is not a problem for me, I have an universal holder in which it will fit in easily
leicashot said:
Don't mean to be negative but I got the case today and it feels great except I'll be returning it. Why? Because the top front and bottom front of the case don't have hard plastic holding down the rubber lips, so they get caught and stretch in the pocket when retrieving. This over time may cause the rubber to tear or stretch too much cause it's very elastic and thin.
Whereas the Otterbox Commuter has the plastic sides cover top, bottom and both sides so that no rubber is loose, but held down tight. A much better product from my experience in the past and looking forward to having it when it arrives in the next week or so. This review will cover what I was talking about. http://www.youtube.com/watch?v=21Dxcyfm3Vg
UPDATE: See my review on both cases here. http://forum.xda-developers.com/showthread.php?p=27997216#post27997216
Click to expand...
Click to collapse
I read a negative point about Tough case from you in another thread. Didn't see it mentioned here.
So is this problem a big thing or can i go with Tough case?
I have the Otterbox Commuter case on my S3 and I love it!! I had a defender case on my Tbolt and it added weight and size to it. I did not like it for that reason. The commuter case for the S3 fits just right and doesnt take away from the size that much. I have to believe this is a must have case for some protection for your phone.
anyone know if the case mate tough fit the active holster because it does appear to be the same size as the commuter
What are the dimensions of the case mate tough.
Nice review! Have u ever used the incipio silicrylic? seems very much comparable to the Case-Mate Tough and I dont know which one to choose.. Heres a link http://www.amazon.com/Incipio-SA-302-Silicrylic-Silicone-Samsung/dp/B0085VAP38/ref=sr_1_2?s=wireless&ie=UTF8&qid=1353870767&sr=1-2&keywords=incipio+s3
Hi, just got my casemate tough for the galaxy s4. I've been using one with my galaxy s3 and am very pleasedwith it but, unfortunately the one for the s4 is a bit disappointing. Although the look is the same the lip around the screen isn't as deep and the rubber doesn't come over the metal border fully. The volume button only has the rubber over it without the plastic surrounding which makes it feel fragile. I'll be returning the case and have ordered an otterbox commuter, although I would've preferred the casemate. Hope it's helpful.
I have 2 brand new Otterbox Defender series warranty replacements for sale, a Grey on white and Black on black with clip holsters for sale. Looking to sell both for cheap in a bundle. Shoot me a PM if your interested.
Sent from my SM-N900P using Tapatalk 2
I recently recieved my second SPECK CandyShell Clear for my HTC 10 (I broke the first one by trying to mod it but that's a different story), so I took the chance to take some photos and give you a short review. Disclaimer: This review is neither sponsored, nor did I recieve any discount in order to write this review.
Pricing
I paid ~30 USDs at an online Android accessories retailer (used some available-to-all coupon that reduced the price by ~5 USDs).
The price is pretty hefty when compared to other HTC 10 cases except the original ice view ones.
Retail box
This case comes in the standard SPECK retail box, which looks nice IMHO and is very easy to open.
Build quality / Durability / Looks
Although it is made of plastic, this case definitely screams premium. The way it shimmers and feels in hand sets it apart from its competition.
Unlike the (now retired) Gem Shell I had for my One M9 and similar to the original CandyShells, this one has a two-layered construction: The outer layer is sturdy plastic while the inner one is soft rubber. Both layers are completely transparent (although the rubber has a very slight frozen look only notably when the case is not yet put on the phone).
SPECK promises that this case would resist UV yellowing and I can mostly confirm this: My first CandyShell Clear did not yellow for two month except the buttons. The buttons did yellow indeed but this did not affect the overall looks too much since the rest of the case stayed perfectly clear.
I had some CandyShell/GemShell/CandyShell Grip cases before and one of the very few downsides is that they were quite prone to scratches and looked worn after a couple of days. I was really astonished to see that SPECK made some serious improvements here: The first case had very few scratches after two month, none of 'em were obvious. No comparison to the elder cases where the gloss disappeared quickly due to the surface being covered by scratches all-over.
One nice detail is the SPECK logo. It is placed quite nicely to complement the HTC logo and not to interfere with it. But what it really makes it a stunner is how it is done. It is embossed in the rubber layer of the case in such way. that it appears to be embossed in the metal body of the phone. Nice idea, SPECK!
The only downside in this department is that this case adds some bulk. Not too much and nothing like UAG-like cases, but those who like their device as slim as possible might find it too bulky.
Protection
Protection is where this case really shines. The sturdy outer shell combined with the cushioning inner rubber layer keeps you covered in most drop situations. The front-side lip does not only protect the screen when putting it face to the table but is also thick enough to protect the screen while dropping on almost flat surfaces.
Fitting / Cutouts
This case sits like a glove. It is manufactured to fit the contours of the 10 like a perfect ten (pun intended). All cutouts are surrounded by rubber that will keep dust out of the case.
The small cutouts for the bottom-side and back-side microphone fit perfectly. The headphone jack cutout is big enough so that most headphones should fit into it. The camera cutout is quite big but this way, the flash should not interfere with the case (although I have not tested this). The bottom speaker cutout fits also well, same goes for the USB port cutout.
But the USB port cutout may be the biggest downside of this case: It is so tight that some cables won't fit. The original HTC charger cable, which comes with the 10 does. But my 3rd party cables with metal plugs did not fit and so won't any cables whose plugs are significantly bulkier than the rather slim plug of the original cable.
Remember that I told you, it was a different story that this is already my second CandyShell Clear? I broke the first one while extending the USB port cutout with a drill. Unfortunately, I did not spend enough attention and damaged the inner rubber layer which looked pretty ugly. So I replaced the damaged case with this new one and also replaced my cables with ones that provide slicker plugs. Quite some hassle but this case is definetly worth it.
In case you wonder which cables I was talking about: Aukey CB-CMD5 (pack of 5) will fit while Aukey CB-CMD2 (pack of 5) won't.
Liked this review? Do not forget to push the "thx" button!
Does the tpu on the front fit properly? The lip would get pushed in and down when I put the phone one and I couldn't get it to actually be a lip on the screen. I sent mine back. On the bright side speck has a very easy return process.
if you take a picture with the flash on, does the light bleed through the case?
aer0zer0 said:
if you take a picture with the flash on, does the light bleed through the case?
Click to expand...
Click to collapse
At least the flashlight does. Have not yet checked whether this affects photos. I'd assume so but I remember having read otherwise somewhere. As soon as I tested it, I will let you know.
TotallyAnxious said:
Does the tpu on the front fit properly? The lip would get pushed in and down when I put the phone one and I couldn't get it to actually be a lip on the screen. I sent mine back. On the bright side speck has a very easy return process.
Click to expand...
Click to collapse
This case is a tight fit indeed. It took me some patience to get the phone in while keeping the lid in place. Once the phone is in, it takes some force to remove it. Great for being sure that the phone won't slide out accidentally on drops. Not so great if you want to remove your phone frequently.
After seeing no choices for a regular bumper style case with a pen holder, I decided to get creative and made one for myself. I used this Poetic Turtle Skin case (I have it on all the tables in my house). Then I got these pen holder tabs.
Using an exacto knife I made a tiny cut in the top edge of the case, just barely long enough to equal the width of the pen holder loop. I had to do it slowly and repeatedly cut away until I made it through the thick rubbery material. I think this case will work the best for this because of the durable rubber material should continue to split. Then I pushed the loop through on the inside. I didn't try to adhere the inside tape to the case because the tablet will hold the tab in place, plus the snug fit of the loop through the rubber is pretty tight.
It's been working well and holding up great for me for the past 2 months. I've included some pictures so you can see what it looks like.
Hope this helps someone else out.
How does the tablet sit in the case with the mod? I tried the same thing with a more slim fit case and it prevented the edges of the case from covering the tablet at that spot due to the thickness of the sticky pad.
irieblue said:
How does the tablet sit in the case with the mod? I tried the same thing with a more slim fit case and it prevented the edges of the case from covering the tablet at that spot due to the thickness of the sticky pad.
Click to expand...
Click to collapse
It has worked out very well and there's no chance it will come out. There is a slight bump along the top edge but it's really negligible and doesn't bother me or my use of the tablet. It still covers the entire device and protects the edges.
Ok see
thats a nifty pen holder
Received my Spigen Hybrid case today. Hated it at first, but after some modifications I think it's a keeper.
My issue with the case was twofold:
1. It wouldn't stay on securely, even with the adhesive tabs Spigen put here and there around the inner frames.
2. The lefthand plastic border on front screen moves around, as it is not attached in any manner.
So, I got creative...
I used some clear window insulator tape (Scotch brand) and cut it in strips to add along the inner frame of both front and back of case. Also added one long strip to the front case left edge to keep it from moving around.
It's nice and snug now. You can notice the tape underneath the front frame border...I think I may try putting my dbrand skin over it, or perhaps I'll finagle something else along those lines so it can't be seen. (updated: yes vinyl worked to hide it)
The case is pretty light, definitely durable. Makes the phone chunkier for sure. I can live with it though.
**I also received my CaseMate (the T-Mobile one) today. Hated it. First of all, that rubber hinge cover drove me nuts! All floppy and bunched up while Fold is open. The screen protector on front case had paint overlap from the bezel that I needed to literally scrape off. I did MacGyver that one too...cut the hinge cover right the eff off. It's mediocre at best regardless.
***Added Pics of modified CaseMate Case - removed hinge cover, removed cheapo included screen protector, added same adhesive tape to make it snug and secure. I may actually prefer the feel of this case over the Spigen Hybrid!
****OK, added some vinyl to the Spigen. It covers up the tape perfectly...also covered the metal plate on back that I use for magnetic mounts at home and in car.