Develop Bugs

[Q] APN Settings for AT&T?

NOTE: I posted this in the General Section as well, but I realized that may have been the incorrect place to post my question, hence I am posting it here. Mods, feel free to delete that post in the General Section.
First off, I have a Desire Z (Bell Version) that I have rooted with stable version of CM 7.03.
I have been problems sending MMSes for a while now. I've looked up the various settings listed all over the Internet, but nothing has worked. I've tinkered and I rebooted the phone everytime I changed the APN settings.
Here's what's on my phone currently (this is after doing much tinkering from the various settings I've found on the Internet):
Name: AT&T
APN: wap.cingular
Proxy: Not Set
Port: 80
Username: [email protected]
Password: CINGULAR1
Server: Not Set
MMSC: http://mmsc.cingular.com
MMS Proxy: 69.209.11.32
MMS Port: 8080
MCC: 310
MNC: 410
Authentication Type: PAP or CHAP
APN Type: default,supl,mms
Now after deleting this APN and resetting to default, this is what I have:
Name: ATT
APN: wap.cingular
Proxy: Not Set
Port: Not Set
Username: [email protected]
Password: Not Set
Server: Not Set
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: Not Set
APN Type: default,supl,mms
After going to the default settings, I still can't send MMSes and it's driving me nuts.
Also, I noticed there's version 7.1 out. However, as far as I know, MMS supposedly works fine on the version I have and I do remember being able to send MMS in the past occasionally, so I don't know what's going on...
Anybody have any ideas?

Flash the latest nightly after a wipe. You could also try a third party texting app.
Sent from my HTC Vision using XDA Premium App

Apns

For my friends on att what are your apn settings?
Sent from my GT-N7100 using Tapatalk 2

try these
http://forum.jakar.co/android-hack/1344973587/

Thank you thank you thank you.
It amazes me how people just leave and never press thank button or at least say thank you to a useful post. Discouraging behavior.
Thanks my CA friend
---------- Post added 11th November 2012 at 12:02 AM ---------- Previous post was 10th November 2012 at 11:57 PM ----------
Just in case that outside link become invalid in the future, i'm RE-POSTING the settings in this thread. I believe xda will hold as a server more stably so we can come back and check. The traditional "phone" + "wap.cingular" worked for me.
ALL CREDITS GOES TO Jakar from Jakar.co
Thanks
AT&T 2G / 3G:
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
AT&T LTE:
Name: ATT PTA
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth: none
APN type: default,mms,supl,hipri
AT&T HSPA+ (requires PHONE and MMS):
Name: ATT MMS
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: -
Password: -
Server: -
MMSC: http://mmsc.cingular.com/
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: -
APN Type: mms,supl
APN Protocol: ipv4
Name: ATT PHONE
APN: phone
Proxy: -
Port: -
Username: -
Password: -
Server: -
MMSC: -
MMS Proxy: -
MMS Port: -
MCC: 310
MNC: 410
Authentication Type: -
APN Type: default,internet
APN Protocol: ipv4

Never mind. Dont post when your tired lol
Sent from my SGH-I717 using Tapatalk 2

[q] help! Urgent!

Hi, I'm in the United States, using AT&T on a telus branded galaxy s3
unlocked using the jelly bean unlocking trick...
trouble is, now it won't hold a call and will disconnect at random times
saying that i'm "out of network area"
It will reconnect to the network soon after (a second or two after my call disconnects)
but will repeatedly drop calls soon after...
I can't get a call going for more than a minute!
So I tried buying an unlock code from cellunlockers.net,
and got one.
But the problem is, I can't input the codes either...
It says connection error or invalid MMI code...
So i can't input any USSD codes...
So here are my questions:
What can I do to fix this issue?
Can I lock the phone again and undo the jelly bean unlock trick?
Thanks in advance!

I don't think it has anything to do with unlocking the phone, if your phone is locked you can't place a call. it has to do with the network you're on. Have you considered that you might actually be "out of network area"? Do you have the proper apn settings?

mrnovanova said:
I don't think it has anything to do with unlocking the phone bro, if your phone is locked you can't place a call. it has to do with the network you're on.
Click to expand...
Click to collapse
So what can I do to fix this problem?
Should I try getting a new sim card?

Do you have the proper apn settings?
How long has this been happening?
What Rom are you on? Stock?
What version?
We need more info to be able to help.

I just went into APN settings and
clicked set as default... is that not what I should have done?

What Rom are you on? Stock?
What version?
We need more info to be able to help.
Did setting apn as default Help? Try making a phone call.

I'm currently on stock rooted 4.1.1,
and this problem has been happening for
the month and a half or so i've had an AT&T sim card
in my galaxy s3...
Under APN settings, there's only one APN,
Cingular 410

You need to add the proper APN for AT&T. Just search for att apns and you'll find them here on XDA.

Unfortunately I have to get going. Please give as much info as you can. If you need help you're in the right place. There are tons of android savvy geeks at your fingertips. Good Luck!
---------- Post added at 09:09 PM ---------- Previous post was at 09:07 PM ----------
Speak of the Devil! Task650 is second to none in all things android. you're in good hands.
Ps Man Task. You're everywhere>
---------- Post added at 09:15 PM ---------- Previous post was at 09:09 PM ----------
Try this
http://forum.xda-developers.com/showthread.php?t=1851128 The 4g one.

mrnovanova said:
Unfortunately I have to get going. Please give as much info as you can. If you need help you're in the right place. There are tons of android savvy geeks at your fingertips. Good Luck!
---------- Post added at 09:09 PM ---------- Previous post was at 09:07 PM ----------
Speak of the Devil! Task650 is second to none in all things android. you're in good hands.
Ps Man Task. You're everywhere>
---------- Post added at 09:15 PM ---------- Previous post was at 09:09 PM ----------
Try this
http://forum.xda-developers.com/showthread.php?t=1851128 The 4g one.
Click to expand...
Click to collapse
I see everything and go everywhere on XDA.

http://forum.xda-developers.com/showthread.php?t=1791526
I found these settings, and I think it solved my calling problem...
but now i don't get data!
I have the 65$ gophone plan that includes 1gb of data, but now
when i try to access the internet sans wifi,
it can't connect....
Please help!!!

Michelle0987 said:
http://forum.xda-developers.com/showthread.php?t=1791526
I found these settings, and I think it solved my calling problem...
but now i don't get data!
I have the 65$ gophone plan that includes 1gb of data, but now
when i try to access the internet sans wifi,
it can't connect....
Please help!!!
Click to expand...
Click to collapse
Ok. So it seems as though you are not giving enough information for anyone to efficiently be able to help you. Please provide as much info as possible. You said you are on AT&T (Not the gophone plan). You need to find out what APNs that the gophone SIM uses so that you can enter those in the APN Settings.

I found apns that allow for data, but it's the default one
that kept cutting my voice... is there no apn that consolidates
the two into one?
the default APN is
Name: AT&T
APN: wap.cingular
proxy: none
port: none
username: [email protected]
password: CINGULAR1 (case sensitive)
Server: none
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
APN Type: none
and the one i'm using right now is:
Name: AT&T HSPA+
APN: phone
Proxy: Blank
Port: Blank
Username: blank
Password: blank
Server: blank
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms,hipri
APN protocol: leave as is
Bearer: leave as is

Michelle0987 said:
I found apns that allow for data, but it's the default one
that kept cutting my voice... is there no apn that consolidates
the two into one?
the default APN is
Name: AT&T
APN: wap.cingular
proxy: none
port: none
username: [email protected]
password: CINGULAR1 (case sensitive)
Server: none
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
APN Type: none
and the one i'm using right now is:
Name: AT&T HSPA+
APN: phone
Proxy: Blank
Port: Blank
Username: blank
Password: blank
Server: blank
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms,hipri
APN protocol: leave as is
Bearer: leave as is
Click to expand...
Click to collapse
You just told me you are on gophone? What are you on? A gophone plan or an AT&T plan? Like I stated before you need the APN settings for the type of plan you have. Try these for GOPHONE. You need to make two APNs and delete all other apns!!!
1st APN
Name: US - GoPhone Web
APN: wap.cingular
Proxy:
Port:
Username: [email protected]
Password: CINGULAR1
Server:
MMSC:
MMS Proxy:
MMS Port:
MMS Protocol: WAP 2.0
MCC:
MNC:
Authentication Type: PAP
APN Type: default, supl
2nd APN
PXT Messaging MMS:
Name: US - GoPhone MMS
APN: wap.cingular
Proxy:
Port:
Username: [email protected]
Password: CINGULAR1
Server:
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC:
MNC:
Authentication Type: PAP
APN Type: mms

I think that fixed it! thanks!

Michelle0987 said:
I think that fixed it! thanks!
Click to expand...
Click to collapse
Say it like you mean it girl! Hit the thanks button.
Sent from my SGH-I747 using XDA Premium HD app

It's still dropping calls! T.T
Are there any other APNs I can use or is there a way to input the unlock code
via a ussd code on this version of the galaxy s3? I think it might be a bad unlock...
or at least that's what the telus live chat support agent told me

Michelle0987 said:
It's still dropping calls! T.T
Are there any other APNs I can use or is there a way to input the unlock code
via a ussd code on this version of the galaxy s3? I think it might be a bad unlock...
or at least that's what the telus live chat support agent told me
Click to expand...
Click to collapse
is your IMEI intact? Dial *#06# and tell me if it's the same IMEI as the back of the battery or it's 0.

[How To][Guide] Att Apn List

This is a guide for changing your apn for throttling issues or trying to get a better signal.
Here's a list of the ATT APN list that I put together. I have tested these some work with everything DATA,LTE,MMS,VOICE, ETC. And some of them were request from other members here. So I just posted what was asked for into one location. If they work for you keep them if not, just delete and keep the ones you'll b using. NEVER DELETE THE STOCK APN JUST IN CASE!
If I run across any others I sure to add them here.
If anyone has any that I missed let me know and I'll add them to the list...
#1.Go into setting, then more setting, mobile networks, then pick Access point Names.
#2. In order to enter a new APN, hit the left menu key. Pick New APN, then enter your APN setting as listed below. After that hit Menu again then save! Then you can select that Apn, by hitting the dot next to the new apn
Everyone's results will vary, pending on location...
Thanks to @ShrekOpher
Found a new APN for VOLTE on AT&T. Works great on the Note 4.
Name: AT&T Nextgenphone
APN: nxtgenphone
Proxy/Port/Username/Password/Server: Not set
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,admin,mms,supl,hipri,internet
APN protocol: IPv4
APN roaming protocol: IPv4
APN enable/disable: APN enabled
Bearer: Unspecified
MVNO type: none
MVNO value: Not set
Default Galaxy Note2 Apn setting! This is what comes stock on the phone!
Name: ATT PHONE
APN: phone
Proxy: ~Not set~
Port: ~Not set~
Username: ~Not set~
Password: ~Not set~
Server: ~Not set~
MMSC:http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type:
APN type: default,mms,supl
Name: AT&T LTE
APN: pta
Proxy: ~Not set~
Port: 80
Username: ~Not set~
Password: ~Not set~
Server: ~Not set~
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type:
APN type: default,admin,fota,mms,supl,hipri,internet
Tried this one also and everything works fine but it seems like it stays on H and H+ more often.
Name: AT&T TEST 1
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: ~Not set~
Password: ~Not set~
Server: ~Not set~
MMSC: ~Not set~
MMS Proxy: ~Not set~
MMS Port: ~Not set~
MCC: 310
MNC: 410
Authentication type:
APN type: default,supl,agps,fota,dun
Now this one connects to the network but it defaults back to the stock apn after a few minutes. Not sure if its just my phone or not so that's why I posted it anyway. Because someone had asked for it..
Name: AT&T TEST 2
APN: broadband
Proxy: wireless.cingular.com
Port: 80
Username: ~Not set~
Password: ~Not set~
Server: ~Not set~
MMSC: ~Not set~
MMS Proxy: ~Not set~
MMS Port: ~Not set~
MCC: 310
MNC: 410
Authentication type: ~Not set~
APN type: tether
Same thing with this one as to Test 2. Connects but then defaults back to stock!
Name: AT&T TEST 3 MM
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: Not set
Password: Not set
Server: Not set
MMSC:http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: ~Not set~
APN type: mms,supl
Now this APN works just like the stock but may speed up your data, if your begin throttled from using to much DATA!
Name: AT&T TEST 4 HSDPA
APN: phone
Proxy: ~Not set~
Port: ~Not set~
Username: ~Not set~
Password: ~Not set~
Server: ~Not set~
MMSC: ~Not set~
MMS Proxy: ~Not set~
MMS Port: ~Not set~
MCC: 310
MNC: 410
Authentication type: ~Not set~
APN type: default,supl,agps,fota,dun
NO problems with this one either. Tested everything and all works great! Maybe a little faster pending on what area your in!
Name: AT&T TEST 5
APN: PTA
Proxy: ~Not set~
Port: ~Not set~
Username: ~Not set~
Password: ~Not set~
Server: ~Not set~
MMSC:http://mmsc.mobile.att.net
MMSC proxy: 66.209.11.32
MMS port: 8080
MCC: 310
MNC: 410
Authentication type: ~Not set~
APN type : default,supl,mms,hipri
For those on the straight talk plan...
Name: Straight Talk
Name: Straight Talk
APN: att.mvno
Proxy: not set
Port: not set
MMSC:http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Port: 80
APN type: default,supl,mms,hipri
Just trying to help out where I can

Other apn's
Let me know if these help you guys out. These are some other APN's I've came across so I added for who ever needs them!
What's here is T-Mobile stock, T-Mobile straight talk, NET 10/ST, Rogers Media, Rogers Canada, Telcel Mexico... Cricket Wireless
++++My T-Mobile APN's++++
Best
Name: T-Mobile US LTE
APN: fast.t-mobile.com
Proxy: 216.155.165.050
Port: 8080
Username: Not Set
Password: Not Set
Server: wap.voicestream.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
Mutimedia Proxy: 216.155.165.050
Multimedia Port: 8080
MCC: 310
MNC: 260
Auth Type: Not Set
APN Type: default,admin,mms,supl,dun,hipri (may be set default to internet+mms)
APN Protocol: IPv4 (6?)
APN Roaming: (same)
Bearer: Unspecified
MVNO type: None
MVNO value: Not Set
Secondary
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.155.165.050
Port: 8080
Username: Not Set
Password: Not Set
Server: epc.tmobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
Mutimedia Proxy: 216.155.165.050
Multimedia Port: 8080
MCC: 310
MNC: 260
Auth Type: Not Set
APN Type: default,admin,mms,supl,dun,hipri (may be set default to internet+mms)
APN Protocol: IPv4 (6?)
APN Roaming: (same)
Bearer: Unspecified
MVNO type: None
MVNO value: Not Set
Name: TMO ST
APN: wap.tracfone
Proxy: blank
Port: 8080
User name: leave blank
Password: leave blank
Server: leave blank
MMSC: http://mms.tracfone.com
MMS proxy. blank
MMS port. 8080
MCC:
MNC:
Authentication type:
APN type: default,supl,mms
Name: NET10 or ST
APN: att.mvno
Proxy: proxy.mvno.tracfone.com
Port: 80
User name: leave this field blank
Password: leave this field blank
Server: leave this field blank
MMSC: http://mmsc.cingular.com
MMS proxy: mms2.tracfone.com
MMS port: 80
MCC:
MNC:
Authentication type:
APN type:
Rogers Media
Name: Rogers M
APN: media.com
Proxy: 10.128.1.69
Port: 80
Username: media
Password: mda01
Server:
MMSC:
MMS Proxy:
MMS Port:
MCC: 310
MNC: 720
Authentication type: mms
APN type: mms
Rogers Canada
Name: Rogers
APN: rogers-core-appl1.apn
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: http://mms.grps.rogers.com
MMS proxy: 10.128.1.69
MMS port: 80
MCC: 302
MNC: 720
Authentication type: not set
APN type: not set
Telcel Mexico APN
Name: Telcel
APN: internet.itelcel.com
User: webgprs
Pass: webgprs2002
Cricket Wireless
Name: Internet
APN: ndo
Proxy: Not Set
Port: Not Set
Username: Not Set
Password: Not Set
Server: Not Set
MMSC: http://mmsc.aiowireless.net
MMS Proxy: proxy.aiowireless.net
MMS Port: 80
MCC: 310
MNC: 150

please any can put the APN for the company Called "Telcel" on Mexico ? thanks

Re: Att apn list
boni7010 said:
please any can put the APN for the company Called "Telcel" on Mexico ? thanks
Click to expand...
Click to collapse
I'll c what I can find for you..
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2

I tried the last one on the list, seem to work better compare to the stock. Average -98dBm on stock, now -93dBm on new APN :good:
Thank You

Re: Att apn list
pakxelaos said:
I tried the last one on the list, seem to work better compare to the stock. Average -98dBm on stock, now -93dBm on new APN :good:
Thank You
Click to expand...
Click to collapse
Your welcome..
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2

Re: AT&T APN LIST
Maybe I should put this in the development section. Because I'm not sure if everyone is getting to c it. Being that it was asked for so much. In and around the NOTE 2 threads! Think I should have asked a MOD to see if was ok to post into the development section???
But hopefully it helps who ever find it.
Just my 2¢
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2

Bajanman said:
Maybe I should put this in the development section. Because I'm not sure if everyone is getting to c it. Being that it was asked for so much. In and around the NOTE 2 threads! Think I should have asked a MOD to see if was ok to post into the development section???
But hopefully it helps who ever find it.
Just my 2¢
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
Ive used the second one. That one stays on H/H+ the entire time. Its the best way to switch between bands. I'll have to try the last one to see if it improves my signal any. Although compared to my last phone the signal is better on my note 2 than my Atrix HD although the Wi-FI isn't quite as strong than my AHD

Re: Att apn list
HAYDENB said:
Ive used the second one. That one stays on H/H+ the entire time. Its the best way to switch between bands. I'll have to try the last one to see if it improves my signal any. Although compared to my last phone the signal is better on my note 2 than my Atrix HD although the Wi-FI isn't quite as strong than my AHD
Click to expand...
Click to collapse
Glad to know that they helped. Yes I did notice that one did stay on H/H+... Yeah let me know if the other one helps you. Still searching for others for US! :beer:
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2

Re: Att apn list
Sent from my Nexus 4 using xda premium

Thanks for this! Just started getting throttled for the first time today and found this works great!

Re: Att apn list
Gr8Danes said:
Thanks for this! Just started getting throttled for the first time today and found this works great!
Click to expand...
Click to collapse
Your welcome!
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2

Re: Att apn list
Rogers canada?

Re: Att apn list
twanskys204 said:
Rogers canada?
Click to expand...
Click to collapse
Ok I'll get that up asap also!
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2

Re: Att apn list
twanskys204 said:
Rogers canada?
Click to expand...
Click to collapse
Rogers you asked for are up now! I'll send you a PM..
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2

Re: Att apn list
Let me know if those help you out. As far as speed and data! Lol
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2

Re: Att apn list
Thanks to the OP for posting this information. I needed the shipped AT&T APN after a flash to get my LTE working again. I've never been throttled.
Sent from my GT-N7105 using xda premium

Re: Att apn list
done12many2 said:
Thanks to the OP for posting this information. I needed the shipped AT&T APN after a flash to get my LTE working again. I've never been throttled.
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
Not a problem. Glad I can help!
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2

I've found using "AT&T TEST 5" settings to have the best DL/UL speeds out of all the APN settings, thanks

Re: Att apn list
lewster291 said:
I've found using "AT&T TEST 5" settings to have the best DL/UL speeds out of all the APN settings, thanks
Click to expand...
Click to collapse
Glad it helped! And your welcome
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2

APN Settings for MMS with Wifi On with 3rd Party Messengers

I posted this over at AC too. I had the issue of not being able to receive MMS with wifi on with any messenger except Hangouts and the stock Messaging app. I found out that I had to create a new APN but that only worked on LTE. These settings will work for LTE or HSPA/3G. It will allow the messaging app to automatically turn on mobile data and download the message. Not sure if it'll mess with wifi calling since I don't use it so YMMV. Since this is a new account the MMSC url had to be broken to post this so adjust as needed.
Name: T-MOBILE
APN: epc.t-mobile.com, fast.t-mobile.com
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: <Leave in Blank>
Password: <Leave in Blank>
Server: <Leave in Blank>
MMSC: http :// mms.msg.eng.t-mobile. com/mms/wapenc
MMS proxy: <Leave in Blank>
MMS port: <Leave in Blank>
MCC: 310
MNC: 260
Authentication type: <Leave in Blank>
APN type: default,supl,mms
APN Protocol: IPv4/IPv6
APN Roaming Protocol: IPv4/IPv6
Bearer: Unspecified

Well all was working well till I started toggling wifi calling to see how it would work then now the phone is saying my APN is invalid.

Jayslaw said:
Well all was working well till I started toggling wifi calling to see how it would work then now the phone is saying my APN is invalid.
Click to expand...
Click to collapse
Can you have two APN addresses in one profile? Don't think I've ever seen that before...
Sent from my HTC One_M8 using Tapatalk

That's what I thought too but I was just messing around with it and it worked. I got rid of the epc APN and it works again with just fast even if I have LTE off, but I'm not gonna mess with it again till after work.