Develop Bugs

[MOD]Lower Auto-Brightness levels to save battery XFJVA

I modded the values in the framework-res.apk/res/values/arrays.xml to lower the auto brightness settings using apk tool which hopefully should save battery
this is the values i used
Code:
<integer-array name="config_autoBrightnessLcdBacklightValues">
<item>5</item>
<item>30</item>
<item>70</item>
<item>130</item>
<item>255</item>
</integer-array>
the low value is when your in low light and the high value is when your in sunlight default samsung is
Code:
<integer-array name="config_autoBrightnessLcdBacklightValues">
<item>32</item>
<item>69</item>
<item>118</item>
<item>177</item>
<item>255</item>
</integer-array>
this only works for XFJVA i don't have time to change it for jvt hope this helps people save battery
DOWNLOAD LINK
http://www.multiupload.com/5AL40WN0VC

Can someone else port this to JVT?

[MOD] XWJW1 CRT SIP 3G Autobrightness tweak

I have Modded the framework.apk to give crt and cif over 3g by editing the bools.xml file.
i modded the file in framework-res.apk/res/values/arrays.xml to give lower brightness much lower than samsung default
Samsung default
Code:
<integer-array name="config_autoBrightnessLcdBacklightValues">
<item>32</item>
<item>69</item>
<item>118</item>
<item>177</item>
<item>255</item>
</integer-array>
My version
Code:
<integer-array name="config_autoBrightnessLcdBacklightValues">
<item>5</item>
<item>30</item>
<item>70</item>
<item>130</item>
<item>255</item>
</integer-array>
it should give much better battery life on auto brightness and to get the best out of it use a kernel which has light sensor polling set to 1s
download framework.apk file and use adb or root explorer to install to system/framework
Download Link http://www.multiupload.com/CNAV8G3J68
for some reason this brightness tweak does not work on stock, cfroot or talon kernel but works on semaphore.
before applying this tweak I would get 2 hours and 30 minutes display time with the tweak I can get 3 hours and 30 minutes

Cannot see such folder "framework-res.apk/res/values"

decompile with apktool than can you find this

[TWEAKS][ICS] ICS/CM9 performance tweaks! [UPDATED]

************************************************
IF THE LINES ARE NOT ALREADY IN BUILD.PROP, JUST ADD THEM TO THE END OF THE FILE
************************************************
So i found these in the net.
I have applied them in latest Fuzz's build and it is very smooth!!
Here are just a couple of tweaks to smoothen one's UI experience in Android 4.0 Ice Cream Sandwich. (Remember these changes won't apply without a reboot and you will need a rooted device).
Improve UI frame rate and touch response:
Code:
windowsmgr.max_events_per_sec=240
Disable kernel error logging:
Code:
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
Get rid of CPU rendering:
1. Navigate to /system/lib/egl/
2. Open the file named "egl.cfg"
3. Delete the first line. It should say "0 0 android" or something similar
4. Go back into the egl folder and delete libGLES_android.so
What this does is remove the entire soft-rendering pathway from the OS.
Enable tile rendering:
Tile rendering is a more efficient form of GPU composition, and boosts performance since each frame is split into tiles.
Code:
debug.enabletr=true
Improve Scrolling FPS:
Code:
ro.max.fling_velocity=6000
Signal Tweaks:
Code:
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=5
Network Speed tweaks:
Code:
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
Disable bootanimation for faster boot:
Code:
debug.sf.nobootanimation=1

i have only read permission bt not write...what should i do in this case
and d commands u said are not there in build.prop
i m using cm9 kangs by fuzz

you should use root file browser, e.g Root Explorer, and press mount as r/w on the top right corner.
then long press on build.prop file and select open in text editor
then add the lines to build.prop file, save and reboot

Solid explorer is another root explorer that's free and has an inbuilt text editor
Sent from my MB525

@OP, what were the specific values you used for scrolling fps and UI frame rate on your device

I found another thread on xda a stock/beta thread dealing with xperia and there were a few more tweaks.will post the link when I get to my PC.however that one had the values for deep sleepand performance.so far I am enjoying it.very fast and snappy.no boot loops nothing:thumbup:
Sent from my MB526 using xda premium

hsrars-d said:
you should use root file browser, e.g Root Explorer, and press mount as r/w on the top right corner.
then long press on build.prop file and select open in text editor
then add the lines to build.prop file, save and reboot
Click to expand...
Click to collapse
I just copied the file using drop box edited it on my PC and again synced it with my phone.just used ROM toolbox pro to set permissions
Sent from my MB526 using xda premium

syllogyking said:
@OP, what were the specific values you used for scrolling fps and UI frame rate on your device
Click to expand...
Click to collapse
windowsmgr.max_events_per_sec=240
ro.max.fling_velocity=6000
Sent from my MB525 using xda premium

http://androidforums.com/triumph-all-things-root/495620-build-prop-performance-tweaks-updated-04-14-2012-a.html
http://www.s3forums.com/forum/galaxy-s3-hacking-mods/474-list-some-build-prop-tweaks.html#post8158

Cleaned OP and added some more stuff

Not working
Tried adding to end of prop file but no effect. Should i leave a space after the last entry i.e.
**********(last entry)
winowdsmgr_****
or
**********(last entry)
windowsmgr_****
obviously what a typed above is a quick example not what I typed into build prop.
Thanks.

Tile rendering makes all my launchers crash even Trebuchet. The only option then left is to restore.

GigahurtzUK said:
Tried adding to end of prop file but no effect. Should i leave a space after the last entry i.e.
**********(last entry)
winowdsmgr_****
or
**********(last entry)
windowsmgr_****
obviously what a typed above is a quick example not what I typed into build prop.
Thanks.
Click to expand...
Click to collapse
I added it with no space, above the line that reads #end of build.prop
like this :
some_line
added_line
# end build properties
And you may not feel any difference, latest build is just fine without these tweaks, just added them before HWA builds came out

these are the ones i put in build.prop, and the phone feels smoother and more responsive now.
Code:
windowsmgr.max_events_per_sec=240
debug.enabletr=true
ro.min.fling_velocity=8000
ro.max.fling_velocity=12000
persist.sys.ui.hw=1
ro.media.enc.jpeg.quality=90
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
persist.sys.purgeable_assets=1
video.accelerate.hw=1
ro.ril.disable.power.collapse=1
pm.sleep_mode=1
ro.HOME_APP_ADJ=1
#modified lines:
#dalvik.vm.dexopt-flags=m=v,o=y
#ro.telephony.call_ring.delay=0
#hwui.whitelist=0
#hwui.blacklist=
#wifi.supplicant_scan_interval=120
sent from my cm9 defy...

Disabling the boot animation didn't work for me :/
I'm using a custom boot animation located in
/system/media/bootanimation.zip
My build.prop has it as my last entry:
http://pastebin.com/raw.php?i=EsLRbFNn

How can i use the Linaro tweaks?

Bleak3993 said:
How can i use the Linaro tweaks?
Click to expand...
Click to collapse
I'm wondering the same
btw, the bootanimation trick didn't work for me!

hsrars-d said:
************************************************
IF THE LINES ARE NOT ALREADY IN BUILD.PROP, JUST ADD THEM TO THE END OF THE FILE
************************************************
So i found these in the net.
I have applied them in latest Fuzz's build and it is very smooth!!
Here are just a couple of tweaks to smoothen one's UI experience in Android 4.0 Ice Cream Sandwich. (Remember these changes won't apply without a reboot and you will need a rooted device).
Improve UI frame rate and touch response:
Code:
windowsmgr.max_events_per_sec=240
Disable kernel error logging:
Code:
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
Get rid of CPU rendering:
1. Navigate to /system/lib/egl/
2. Open the file named "egl.cfg"
3. Delete the first line. It should say "0 0 android" or something similar
4. Go back into the egl folder and delete libGLES_android.so
What this does is remove the entire soft-rendering pathway from the OS.
Enable tile rendering:
Tile rendering is a more efficient form of GPU composition, and boosts performance since each frame is split into tiles.
Code:
debug.enabletr=true
Improve Scrolling FPS:
Code:
ro.max.fling_velocity=6000
Signal Tweaks:
Code:
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=5
Network Speed tweaks:
Code:
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
Disable bootanimation for faster boot:
Code:
debug.sf.nobootanimation=1
Click to expand...
Click to collapse
Using above fixes I get an error unfortunately trebuchet has stopped and can't operate my phone.
any ideas?

[Guide][MOD] Network Traffic 4.x to 5.x (turn on/off, color, Display unit and more)

Today i came here with new Tut
This tut includes
Status bar traffic monitor
Disable
Outgoing
Incoming
Outgoing and Incoming
Color style
Display unit
Bits per second
Bytes per second
update interval
500 ms
1000 ms
1500 ms
2000 ms
Auto hide
Inactivity threshold
Before going to tutorial First you need to have these mods (If you already had these mods then go to post #2
Color picker settings by @05Gurpreet
and Seekbar Preferences by me
Thanks to carbon rom

mod [settings/systemui]
First you need Deodexed SystemUI.apk and Settings.apk
Lets first start with SystemUI.apk
1. Decompile the SystemUI.apk
2. Open res\values\dimens.xml and add these below codes
Code:
<dimen name="net_traffic_single_text_size">12.0dip</dimen>
<dimen name="net_traffic_multi_text_size">9.0dip</dimen>
<dimen name="network_stats_text_size">10.0dip</dimen>
3. then open res\values\id.xml and these below code
Code:
<item type="id" name="networkTraffic">false</item>
4. then open res\values\status_bar.xml
look for
Code:
<include layout="@layout/system_icons" />
Add this code above it
Code:
<com.android.systemui.statusbar.policy.NetworkTraffic android:id="@+id/networkTraffic" android:layout_width="wrap_content" android:layout_height="fill_parent" android:singleLine="false" />
5. Download this View attachment SystemUI.zip and merge them
6. Compile it and decompile then open smali/com/android/systemui.statusbar/policy/NetworkTraffic.smali
7. After replace the public ids ( by comparing one i gave in zip
8. after compared and replace... compile the app and replace in system
Now time for settings.apk
1. Decompile the settings.apk
2. open settings.apk/res/values/arrays.xml and this below code
Code:
<string-array name="show_network_traffic_state_entries">
<item>@string/show_network_traffic_disable</item>
<item>@string/show_network_traffic_up</item>
<item>@string/show_network_traffic_down</item>
<item>@string/show_network_traffic_all</item>
</string-array>
<string-array name="show_network_traffic_state_values">
<item>0</item>
<item>1</item>
<item>2</item>
<item>3</item>
</string-array>
<string-array name="show_network_traffic_unit_entries">
<item>@string/show_network_traffic_bit</item>
<item>@string/show_network_traffic_byte</item>
</string-array>
<string-array name="show_network_traffic_unit_values">
<item>0</item>
<item>1</item>
</string-array>
<string-array name="show_network_traffic_frequency_entries">
<item>@string/show_network_traffic_500</item>
<item>@string/show_network_traffic_1000</item>
<item>@string/show_network_traffic_1500</item>
<item>@string/show_network_traffic_2000</item>
</string-array>
<string-array name="show_network_traffic_frequency_values">
<item>500</item>
<item>1000</item>
<item>1500</item>
<item>2000</item>
</string-array>
3. now open settings.apk/res/values/strings.xml and add these codes
Code:
<string name="default_string">Default</string>
<string name="network_traffic_summary">Enable various network traffic options in statusbar</string>
<string name="network_traffic_title">Network traffic</string>
<string name="show_network_traffic_state">Status bar traffic monitor</string>
<string name="show_network_traffic_unit">Display unit</string>
<string name="show_network_traffic_frequency">Update interval</string>
<string name="show_network_traffic_disable">Disabled</string>
<string name="show_network_traffic_up">Outgoing</string>
<string name="show_network_traffic_down">Incoming</string>
<string name="show_network_traffic_all">Outgoing and incoming</string>
<string name="show_network_traffic_bit">Bits per second</string>
<string name="show_network_traffic_byte">Bytes per second</string>
<string name="show_network_traffic_500">500 ms</string>
<string name="show_network_traffic_1000">1000 ms</string>
<string name="show_network_traffic_1500">1500 ms</string>
<string name="show_network_traffic_2000">2000 ms</string>
<string name="network_traffic_autohide">Auto hide</string>
<string name="network_traffic_autohide_summary">Hide the traffic monitor when there is no activity</string>
<string name="network_traffic_autohide_threshold">Inactivity threshold</string>
<string name="network_traffic_color_style">Color style</string>
<string name="network_traffic_color_reset">Reset color</string>
<string name="network_traffic_color_reset_message">Reset network traffic color to default?</string>
4. now open settings.apk/res/values/attrs.xml and add these codes
Code:
<attr name="unitsLeft" format="reference|string" />
<attr name="min" format="float" />
<attr name="unitsRight" format="reference|string" />
5. Add this to any of your xml
for example i had add to my personal settings (res/xm/rstatusbar.xml)
you can add in display_settings.xml or as you wish
Code:
<PreferenceScreen android:title="@string/network_traffic_title" android:key="network_traffic_state " android:summary="@string/network_traffic_summary" android:fragment="com.android.settings.rz.NetworkTraffic" />
6. download this View attachment Settings.zip and merge to your settings
7. compile and decompile so you will get ids
8. open smali/com/android/settings/rz/NetworkTraffic.smali
9. compare the public ids to my one and replace yours
10. after that compile and replace the settings.apk
Best way to compare the Public ids go here shared by @iedafarha
Oh god finally you did it
Don't forget to mention me in your thread. If you tried my tut

venkat kamesh said:
8. compare the public ids to my one and replace yours
9. after that compile and replace the settings.apk
Oh god finally you did it
Don't forget to mention me in your thread. If you tried my tut
Click to expand...
Click to collapse
Awesome guide mate :good:, for compare the public ids , its easier to use public_id port
Try it ..

Good mode bro Tnx man

iedafarha said:
Awesome guide mate :good:, for compare the public ids , its easier to use public_id port
Try it ..
Click to expand...
Click to collapse
tnx bro you save my time alot

Nimadroid said:
tnx bro you save my time alot
Click to expand...
Click to collapse
welcome for editing xml especially for custom xml , this tools very usefull , xml validator
so save your time when recompile apk without error.
xml validato Application made with Mono 2.0, compatible with .Net Framework 2.0. It allows to load and modify xml, xsd and xsl docs and perform theirs validation, also using an embedded browser. Also, it allows to apply xsl to xml and to validate xml with xsd

Need Fix
Can you help me to fix it for me? Cause try and try but it always can't open Network Traffic menu on settings
I attach my apk
Sorry for my bad english
Thanks for help :angel:
Sloved.
I think you miss something for Public ID on NetworkTraffic.smali
For this publicID :
PHP:
<public type="integer" name="maskUp"
<public type="integer" name="maskDown"
<public type="integer" name="maskUnit"
<public type="integer" name="maskPeriod"
Keep Rockin :highfive:

iedafarha said:
welcome for editing xml especially for custom xml , this tools very usefull , xml validator
so save your time when recompile apk without error.
xml validato Application made with Mono 2.0, compatible with .Net Framework 2.0. It allows to load and modify xml, xsd and xsl docs and perform theirs validation, also using an embedded browser. Also, it allows to apply xsl to xml and to validate xml with xsd
Click to expand...
Click to collapse
ohhhh yeaaa
worked like chrm...

venkat kamesh said:
6. Compile it and decompile then open smali/com/android/systemui.statusbar/policy/NetworkTraffic.smali
Click to expand...
Click to collapse
i dont have networktraffic smali in my folder. can you mod my apk for me

uday94 said:
i dont have networktraffic smali in my folder. can you mod my apk for me
Click to expand...
Click to collapse
You don't have Networktraffic smali in ur folder because u did not follow the instructions in OP. This tutorial works perfectly.. Just try again. Read the full tutorial one time or two time then try..

venkat kamesh said:
Today i came here with new Tut
Click to expand...
Click to collapse
everything worked fine . but whenever i open network traffic option in settings it force closes.

uday94 said:
everything worked fine . but whenever i open network traffic option in settings it force closes.
Click to expand...
Click to collapse
Re check ids..

I used public id port app to change ids. There were some missing ids while editing.

uday94 said:
I used public id port app to change ids. There were some missing ids while editing.
Click to expand...
Click to collapse
There u go.. Try manual way. Find each ids and try again like me..

uday94 said:
I used public id port app to change ids. There were some missing ids while editing.
Click to expand...
Click to collapse
Download the compare_settings_systemui.zip http://forum.xda-developers.com/showthread.php?p=64516025
Decompile and check what you need (if the míssed public id is a attr= search into values/attr.xml and copy the línes you have míssed to your files and follow That way)

Who mod files for m2 2303?

djborek said:
Who mod files for m2 2303?
Click to expand...
Click to collapse
Tutorials is for learning my friend.. Just try it..

I dont know how do it.

djborek said:
I dont know how do it.
Click to expand...
Click to collapse
I made it from z5 style files

Pls send me on my PM files for 2303.

[Guide][Lp-MM-N]Adv Rom control in to stock Settings

hello guys
After long day
i got free time
Today i am going to share Adv Rom control to Settings Integration....
Posting tuts and making settings for them ..... argh.........!
Wasting my time
So i am going to Share you This Easy Preferences.....!
Easy to work with and Easy to use .. thanks to @daxgirl for such a great work... thank you
Using that i had my personal changes to work in built settings and updated color picker and few
Ok lets start on integration of Rom control v1 to your Stock settings ( tested on my Kryptonian Roms )
so here guys, all you need
- Super User Mod ( MM/N, LP )
- Deodexed Stock settings
- Apktools ( i used apktool 2.x )
- and Patience
1. Decompile your Settings.apk
2. Now download this View attachment Settings.apk.zip
3. Extract them and Merge to Stock settings
4. Open Androidmanifest.xml and add these Persmissions
Code:
<uses-permission android:name="android.permission.FORCE_STOP_PACKAGES" />
5. In Settings.apk/res/values/arrays.xml add this
Code:
<string-array name="dashboard_switches_entries">
<item>Switches off</item>
<item>Switches on</item>
</string-array>
<string-array name="dashboard_switches_values">
<item>0</item>
<item>1</item>
</string-array>
<string-array name="dashboard_columns_entries">
<item>One</item>
<item>Two</item>
<item>Three</item>
</string-array>
<string-array name="dashboard_columns_values">
<item>1</item>
<item>2</item>
<item>3</item>
</string-array>
6. In Settings.apk/res/values/attrs.xml add these
Code:
<attr name="colorPrimary" format="color" />
<attr name="colorPrimaryDark" format="color" />
<attr name="colorAccent" format="color" />
<declare-styleable name="ThumbnailListPreference">
<attr name="drawableArray" format="reference" />
<attr name="entryList" format="reference" />
<attr name="entryValuesList" format="reference" />
<attr name="entryDefault" format="string" />
</declare-styleable>
<attr name="switchClass" format="string" />
7. Open Settings.apk/res/values/colors.xml
add these
Code:
<color name="colorAccent">#ffff4081</color>
<color name="colorPrimary">#ff3f51b5</color>
<color name="colorPrimaryDark">#ff303f9f</color>
8. Open Settings.apk/res/values/dimens.xml
add this
Code:
<dimen name="button_size">30.0dip</dimen>
9. Open settings.apk/res/values/string.xml
add these
Code:
<string name="ok">OK</string>
<string name="app_reboot_required_title">App Reboot Required</string>
<string name="app_reboot_required_message">%1$s reboot is required for the changes to take effect.\n\nReboot now?</string>
<string name="dialog_color_picker">Color Picker</string>
<string name="press_color_to_apply">Press on Color to apply</string>
<string name="hex">Hex:</string>
<string name="hex_hint">\#ff000000</string>
Save and Close all
Continued in Next post

Final
Continuation
10. open settings.apk/res/xml/dashboard_categories.xml
add this Any where you like ( i had added under personal header setting )
If under Personal Header then follow this
Find this
Code:
<dashboard-category android:id="@+id/personal_section" android:title="@string/header_category_personal" android:key="@string/category_key_personal">
Below that add this
Code:
<dashboard-tile android:id="@+id/kryp_control" android:title="Kryptonian Menu" android:fragment="com.android.settings.kryp.krypton" />
If you want to add any logo then add this ( Example ) android:icon="@drawable/ic_settings_krypton"
it look like this
Code:
<dashboard-tile [COLOR="red"]android:icon="@drawable/ic_settings_krypton"[/COLOR] android:id="@+id/kryp_control" android:title="Kryptonian Menu" android:fragment="com.android.settings.kryp.krypton" />
and then place the icon in drawable folder in name of ic_settings_krypton and done...!
Now compile and Decompile ... now open
Settings.apk\smali\com\android\settings\kryp\krypton.smali
in that change the public id
Code:
<public type="xml" name="[COLOR="red"]krypton_settings[/COLOR]" id="[COLOR="red"]0x7f080089[/COLOR]" />
Done....!
Compile and Replace with your settings and test
And how this works will be explained in next post
Done Forget to mention me if you use my work

Adding more Preference xml layouts
Apologize for my explanation
The Krypton.smali is linked with krypton_settings.xml where it acts as Dashboard Header over settings part
example.smali is a preferenceScreen Fragments which is linked to kryp_example.xml
So handlerpreferences can be run trough the example.smali fragment
How to add more Preference settings in krypton Dashboard preference
1. copy the example.smali and paste in it with different name like.. displaysettings.smali
2. Open that displaysetting.smali and replace all example to displaysettings
3. the same way create a xml ( kryp_example / kryp_displaysettings )
4. Now in displaysetting.smali change kryp_example to kryp_displaysettings and save
and in krypton_settings.xml add this
add this
Code:
<PreferenceScreen android:id="@+id/example_control" android:title="Basic" android:summary="example of basic pref" android:fragment="com.android.settings.kryp.settings.[COLOR="Red"]displaysettings[/COLOR] " />
So in this Way you can add as many you like to have
How Preferences Work:-
Here The Complete mod work on Key preferences
android:key
android:title = write your title
android:defaultValue = it can be "true" (on) "false" (off) / "1" (on) "0" (off) by default
android:summary = summary msg never change on action.. static msg shown
android:summaryOn = summary msg below shown when status is enabled
android:summaryOff = summary msg below shown when status is disabled
android:icon="@null" will show no icon , if its android:icon="@drawable/ic_settings_krypton" then add an icon in drawable in name of ic_settings_krypton.
android:max="24" will end max to 24 from 1
android:min="2" will start from 1 till max given
unitsRight="" units may be dp/ dip / sec Right meant will Show on right side of seek bar pref
unitsLeft="" units may be dp/ dip / sec Right meant will Show on left side of seek bar pref
Switch preference
Code:
<SwitchPreference android:title="Title" android:key="[COLOR="Red"]Main_key[/COLOR]" android:defaultValue="[COLOR="red"]true[/COLOR]" android:summaryOn="Shown" android:summaryOff="Hidden" />
CheckBox Preference
Code:
<CheckBoxPreference android:title="Title" android:key="[COLOR="Red"]Main_key[/COLOR]" android:defaultValue="false" android:summaryOn="Shown" android:summaryOff="Hidden" />
SeekBar Preference
Code:
<com.android.settings.kryp.settings.prefs.SeekBarPreference android:max="24" android:title="Title" android:key="[COLOR="Red"]Main_key[/COLOR]" android:defaultValue="1" min="1" unitsRight="" />
ListPreferences
Code:
<com.android.settings.kryp.settings.prefs.MyListPreference android:entries="@array/entries" android:title="Title" android:key="[COLOR="Red"]Main_key[/COLOR]" android:defaultValue="8" android:dialogTitle="Dialog title" android:entryValues="@array/values" />
ColorPreferences color Hex code ff737373 change as you need
Code:
<com.android.settings.kryp.settings.prefs.ColorPickerPreference android:title="Title" android:key="[COLOR="Red"]Main_key[/COLOR]" android:defaultValue="\#ff737373" alphaSlider="true" />
EditText Preferences
Code:
<com.android.settings.kryp.settings.prefs..MyEditTextPreference android:defaultValue="simpletext" android:key="[COLOR="Red"]Main_key[/COLOR]" android:title="Title" />
ohppppppppppppp.... done.!
Have fun guys

Nice tut bro. It would be more awesome if you add some screenshots of the advanced rom control settings.

nitesh9 said:
Nice tut bro. It would be more awesome if you add some screenshots of the advanced rom control settings.
Click to expand...
Click to collapse
+1
Verstuurd vanaf mijn F8331 met Tapatalk

nitesh9 said:
Nice tut bro. It would be more awesome if you add some screenshots of the advanced rom control settings.
Click to expand...
Click to collapse
Pandemic said:
+1
Verstuurd vanaf mijn F8331 met Tapatalk
Click to expand...
Click to collapse
Its a complete Customized from your part bro
So it vary from device to device
Only so i havent gave any SS
If you want to see How my settings look like
Then Check These Screen shots
https://forum.xda-developers.com/showpost.php?p=68806751&postcount=2

Wow looks nice, status bar its great

When I decompile settings, and try to recompile, it doesnt work. I dont get a log, or anything! It just keeps on recompiling. Any ideas? I have used every version of apktool I could get my hands on.
Thanks

venkat kamesh said:
hello guys
After long day
i got free time
Today i am going to share Adv Rom control to Settings Integration....
Click to expand...
Click to collapse
great work.... :good:
i got succeeded on this

@venkat kamesh bro i want to make this but in android 7 ( on xperia z5 ) , there is no " dashboard_categories.xml " in " settings.apk/res/xml "
would you please tell me that correct xml name?
i searched a lot but couldnt found
thanks a lot

Hamidreza2010 said:
@venkat kamesh bro i want to make this but in android 7 ( on xperia z5 ) , there is no " dashboard_categories.xml " in " settings.apk/res/xml "
would you please tell me that correct xml name?
i searched a lot but couldnt found
thanks a lot
Click to expand...
Click to collapse
Now adding a tile with nougat you need to add with androidmanifest.xml
No more dashboard_category.xml bro from nougat
If you want edit androidmanifest.xml then you need superusermod bro hmm

venkat kamesh said:
Now adding a tile with nougat you need to add with androidmanifest.xml
No more dashboard_category.xml bro from nougat
If you want edit androidmanifest.xml then you need superusermod bro hmm
Click to expand...
Click to collapse
bro i have supersuer mod
but please tell me how can i do final part ?
https://forum.xda-developers.com/showpost.php?p=70574874&postcount=2
i mean part 10
wait for your help or please update second post.thanks

venkat kamesh said:
Now adding a tile with nougat you need to add with androidmanifest.xml
No more dashboard_category.xml bro from nougat
If you want edit androidmanifest.xml then you need superusermod bro hmm
Click to expand...
Click to collapse
@Hamidreza2010
What Venkat is saying is you need to add new tile on the android-manifest.xml file
it is the project manifest file for any standard android app.
Decompiling an apk would also decompile the manifest file in plain english.
you can look at the file with notepad++ and see that there are many activities and permissions and other primitive android class's objects are being manifested so that the delvik VM can know which class can run their objects and which cant.
Maybe a new tile needs to be mentioned [initialized] there somehow to add it 
 @venkat kamesh can explain the rest i think

@venkat kamesh PLEASE UPDATE FIRST PAGE
i want make this for android N
but second post has my problem
thanks

Hamidreza2010 said:
@venkat kamesh PLEASE UPDATE FIRST PAGE
i want make this for android N
but second post has my problem
thanks
Click to expand...
Click to collapse
What problem? You can do this on N

panzerox123 said:
What problem? You can do this on N
Click to expand...
Click to collapse
in android N there is no dashboard_category.xml and we should add into androidmanifest.xml
but i dont know where of androidmanifest.xml
for this i tell please update

Hamidreza2010 said:
in android N there is no dashboard_category.xml and we should add into androidmanifest.xml
but i dont know where of androidmanifest.xml
for this i tell please update
Click to expand...
Click to collapse
That I'm not sure of, sorry... I'm still on marshmallow unfortunately...

@venkat kamesh bro would you please give me your time for 5 min?
just please update final part for android N
i did some steps but cant do it in final part ( i want to make it in android 7 for z5 )
https://forum.xda-developers.com/showpost.php?p=70956230&postcount=10
thanks

Hamidreza2010 said:
@venkat kamesh bro would you please give me your time for 5 min?
just please update final part for android N
i did some steps but cant do it in final part ( i want to make it in android 7 for z5 )
https://forum.xda-developers.com/showpost.php?p=70956230&postcount=10
thanks
Click to expand...
Click to collapse
Sorry for late reply
Presently I don't have z5 or nougat
Once I get it.. I will update it bro
Sent from my C6902 using XDA-Developers Legacy app

venkat kamesh said:
Sorry for late reply
Presently I don't have z5 or nougat
Once I get it.. I will update it bro
Sent from my C6902 using XDA-Developers Legacy app
Click to expand...
Click to collapse
OK bro Thanks
Remember to you later
Have a nice day bro