Alcantara fit bag..... rubbish! - Samsung Galaxy Nexus

After paying £20 for this I was excited for it to arrive. I shouldn't have been. Positives are it fits well. That's about it. It is so awkward to get the phone in and out I actually don't think I will use it as I feel more likely to drop it now! Also, I expected it to keep the screen clean but it comes out still dirty and finger prints all over it still. I still have to clean the screen with the outside of the fit bag as the inside doesn't seem to clean the screen when pulled out. When I put my phone in top first I lost signal so have to put it in bottom first, I presume the antenna is at the top?
Very disappointed.
Sent from my Galaxy Nexus using Tapatalk

Matcarroll said:
After paying £20 for this I was excited for it to arrive. I shouldn't have been. Positives are it fits well. That's about it. It is so awkward to get the phone in and out I actually don't think I will use it as I feel more likely to drop it now! Also, I expected it to keep the screen clean but it comes out still dirty and finger prints all over it still. I still have to clean the screen with the outside of the fit bag as the inside doesn't seem to clean the screen when pulled out. When I put my phone in top first I lost signal so have to put it in bottom first, I presume the antenna is at the top?
Very disappointed.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
damn that's a shame
And the antenna is at the bottom (3G/EDGE/WiFi). The GPS antenna is at the top.

Don't suppose you know where the wifi antenna is do you?
Sent from my Galaxy Nexus using Tapatalk

Sorry, see what you said now. Strange that as if I put upside down in case I lose wifi and better signal to been top facing up! Would have thought it would have been the other way round if antenna is at the bottom.
Sent from my Galaxy Nexus using Tapatalk

yea, I agree that's weird. Plus I don't see how alcantara can cause any kind of interference.
Curiously, how are you verifying this?
I should be getting mine by the end of the week (ordered last week), I'll let you know if mine suffers from the same issue

To be fair, its a very untechnical observation, just by my battery stats screen. Also, I always have a bad signal at work and was suffering with the volume bug and 2g/3g reception problem so it could also be something to do with this as I only got the update last night.
With reference to the fitbag I have found after half a days use, the phone goes in and out much easier when putting the top in first and leaving the fatter end facing out. The case has slackened off a little and is better now. It does clean the screen a little but doesn't clean finger prints.
Sent from my Galaxy Nexus using Tapatalk

Whats the material itself like? Pics please! I'm still waiting for my suede one, bit worried now!

Matcarroll said:
the phone goes in and out much easier when putting the top in first and leaving the fatter end facing out.
Click to expand...
Click to collapse
Since the "fat end" is the one that has the USB, headphone jack, antenna, and speakers, it wouldn't make sense to insert it any other way, really...
Anyway, I'm interested in getting this pouch as well, so please do let us know what you think after a few more days use

Here's some pics of my pure suede one. I'm liking it so far. Seems to have a fair amount of give to get it in and out, but is tight enough that it doesn't slide out by itself.
BTW pics taken with my Nexus, and the flash makes the white dust light up, a bit like a UV light does in a night club! Normally it looks black and you can't see all that dust.

really can't belive that some leather is the problem of your signal loss.
if the singnal is so poor that you loss it with a case, you can't complain the case for it.

kam187 said:
Here's some pics of my pure suede one. I'm liking it so far. Seems to have a fair amount of give to get it in and out, but is tight enough that it doesn't slide out by itself.
BTW pics taken with my Nexus, and the flash makes the white dust light up, a bit like a UV light does in a night club! Normally it looks black and you can't see all that dust.
Click to expand...
Click to collapse
damn that looks nice.. maybe I should have gotten the suede one. Bah, well I'm still waiting on my alcantara one

kwazi said:
damn that looks nice.. maybe I should have gotten the suede one. Bah, well I'm still waiting on my alcantara one
Click to expand...
Click to collapse
I bought the nappa one and it is really cool. Really well made and feels premium.

Does the top of the phone stick out for you all with this case? I just got my fitbag and the top of the phone sticks out...

outsidah said:
Does the top of the phone stick out for you all with this case? I just got my fitbag and the top of the phone sticks out...
Click to expand...
Click to collapse
Anyone? Bump

Mine fits perfectly. The end of the phone ends just halfway into the lip right at the end of the case - the bit where the leather is folder over underneath and double thickness.
Maybe you were sent the wrong one? I'm sure if you email them they might just send you another one and let you keep that one.

Related

Phantom Skinz Chromatics Black CF..PHOTOS!!!

Hey guys...got the PhantomSkin Chromatic kit in the mail today and decided to install it this morning. The package was very impressive. Included was the Chromatic kit and 2 free screen savers. I was currently using the black OEM gel case with the dinky screen protector. I first put on the screen protector follwing the instructions given. The install was a breeze! Coming from a ZAGG shield, I was very impressed with this screen protector. The screen was clear with little to minimal orange peel! I then started with the Chromatic Install. The battery cover went on smooth. The next thing I did was the camera part. I noticed even though I was pressing down hard and hitting it with the dryer, the sides would pop up! The MT4G has alot of rounded corners so this really concerned me. I went ahead with the bottom part and the sides. Nothing was holding, I dont know if it was the weather or what...I started peeling it off to return the product but decided to look read up here alittle bit. Thanks to member "methodz" who installed this also, I found a new way to install it. I just put on piece by piece, but instead of using the dryer, he recommended a lighter!!! After hearing this, the install was cake..everything stuck on like a glove. I dont recommend this product unless you have the black version as there are many gaps! I love the CF look and it feels great, I am going to keep this setup and match it with the OEM holster till a Otterbox series comes out. Sorry for the big pics, but I wanted everyone to see the detail and the gaps. Hope this helps anybody who was thinking of installing this kit! On to the pics!!!
-Merwin
FYI: I aligned the battery cover after these pictures were taken.
SET #2
Man that looks good.Also looks like a lot of work to get perfectly lined up and stuck down.How much was that?
I'm gonna make out resident screen protector application expert put mine on! It should be here soon
Sent from my HTC Glacier using XDA App
the back of my phone looks like that, but i didn't use the side pieces, just the 3 main pieces on the back.
That looks really good, but I don't think I'd have the patience to line all those pieces up perfectly. What's it going to be like when/if you ever decide to remove them off the phone?
I checked out that site after getting my MT4G, and can't you choose what design you want for your phone? It didn't even show a picture of what it would look like after selecting the one for the MT4G.
Nice photos BTW!
sykokiller said:
Man that looks good.Also looks like a lot of work to get perfectly lined up and stuck down.How much was that?
Click to expand...
Click to collapse
It looks difficult but really easy. It was easy to align. The kit cost $29.99 but there is a 30% off coupon on their site. You get the Chromatic kit plus two free screen protectors for $20.96 shipped to your door!
ESKIMOn00b said:
I'm gonna make out resident screen protector application expert put mine on! It should be here soon
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
HAHAHAH! This my first time! Tell you what..you root my phone and I'll lay this down for you LOL!
methodz said:
the back of my phone looks like that, but i didn't use the side pieces, just the 3 main pieces on the back.
Click to expand...
Click to collapse
Looks good methodz! Your lighter post saved me!
dustrho said:
That looks really good, but I don't think I'd have the patience to line all those pieces up perfectly. What's it going to be like when/if you ever decide to remove them off the phone?
I checked out that site after getting my MT4G, and can't you choose what design you want for your phone? It didn't even show a picture of what it would look like after selecting the one for the MT4G.
Nice photos BTW!
Click to expand...
Click to collapse
Thanks! I used by DSLR and bounced the flash so you can get an idea of the CF pattern and tried to get as much detail as possible. The install was easy bro! Also I peeled off some of the stuff i slightly heated and it came off without residue!
Looks good, but it would concern me that the silver bezel is still exposed to possible scratching/damage in the event of a drop. Is there any way to protect that with a skinz type of system like this?
Also, you were able to peel off some without residue, but does anyone have experience trying to get this kind of thing off after a few months?
How exactly to use the lighter???
I am unpacking now...
QUEDRO said:
How exactly to use the lighter???
I am unpacking now...
Click to expand...
Click to collapse
Just get close to the parts that arent sticking well and run it back and forth maybe like 3 timess to give it a little heat. Dont let the flame touch the CF. Get your thumb afterwards and stroke it into place LOL! GL on the install!
Geezz....I already messed up the screen shield.....DUNNO this instruction says soap, but id doesn't workout....
I see kinda wave-y pattern....is it normal?
Ain't for me this job...I'm pissed now
PS: redid it, look ok now, not perfect job though......Scared to apply the CF skin.
yes, this phone has a lot curve, Even Zagg was hard to put on the phone. but I manage to get zagg stick in to the phone now.
If it doesn't work, I can send it back for replacement. I hope you guy can send your Phantom skinz back too if you mess it up.
QUEDRO said:
How exactly to use the lighter???
I am unpacking now...
Click to expand...
Click to collapse
haha, i guess i'm daring... i stuck the skin on first and lit the actual CF areas. just don't light it for too long or you can damage something, just a split second or a few passes. you will find some of the skin doesn't stick too well if it is cold out so you will have to heat it. the instructions say use a blow dryer but i used a lighter instead.
I did it! And actually I am very impressed with my results on CF skin! Was easy and trick with the lighter worked fantastic! Very pleased! Looks and feels great!
Thank you guyz!
Looks nice! I would warn people you will feel the edges of the skin when you hold the phone. I used that on an iPhone and removed it after getting tired of feeling the edges of the skin.
Lakeshow423 said:
HAHAHAH! This my first time! Tell you what..you root my phone and I'll lay this down for you LOL!
Click to expand...
Click to collapse
thats kinda how it works out... i work at radioshack and im the one resident geek... i root all the phones, hack wii's, xbox, ps3... one of the guys is really good at applying screen protectors and such. when mine gets here i'll take it to him and have him put it on... then im sure we'll go use that lighter for something else...
SugarMouth said:
Looks nice! I would warn people you will feel the edges of the skin when you hold the phone. I used that on an iPhone and removed it after getting tired of feeling the edges of the skin.
Click to expand...
Click to collapse
Neah, I barely feel anything. It really depends, I guess, on the shape of the phone. Maybe iPhone is not well suited for this, but mine feels smooth and nice.
I warmed up really well the edges with the lighter when I applied the skin, so it set tight.
QUEDRO said:
Geezz....I already messed up the screen shield.....DUNNO this instruction says soap, but id doesn't workout....
I see kinda wave-y pattern....is it normal?
Ain't for me this job...I'm pissed now
PS: redid it, look ok now, not perfect job though......Scared to apply the CF skin.
Click to expand...
Click to collapse
Just a note for others: the screen protector will show artifacts and other random blobs that may look like smudges when its fresh. This should go away within 48 hours as it completely dries. Just relax and be patient, the world wasn't built in a day.
AFAIK all of these types of protectors (zagg, bse, ps)recommend putting the phone down for 24hrs after application.... to ensure it sticks, and to allow the solution to dry
Sent from my HTC Glacier using XDA App
As soon as you squeeze out most of the water it will work fine for usage. At least with the phantom skinz.
Sent from my HTC Glacier using XDA App

[Q] metal evo case

http://www.boxwave.com/products/armorcase/armor-case-htc-evo-4g_3934.htm
anyone tried this case? theres at least one other thats similar (looks exactly the same http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000989&products_id=30835). looked up some videos on youtube and looks like its fitting kinda loose, like theres a gap between top of case and phone.
Weak signal
I had one on a htc ppc a long time ago and the metal case kind of made my signal weak, but definetly a stong case.
I have one and it works great. The gap between the case and the phone is actually the padding that acts as a shock absorber. I would recommended a Monaco case eBay, it's the same thing check it out.
Thanks for the info people.
Another question, I keep my phone in my pocket all the time. Does the latch or hinges ever get colaught on anything? Looks like it could. That would definitely be a downer.
Sent from my PC36100 using XDA App
rudyrude432 said:
The gap between the case and the phone is actually the padding that acts as a shock absorber.
Click to expand...
Click to collapse
Makes sense. I was about to say putting metal around your phone would probably make it damage more easily...
The latch doesn't get caught on clothing. Not unless your wearing one of those christmas sweaters with the big knit lol.
rudyrude432 said:
The latch doesn't get caught on clothing. Not unless your wearing one of those christmas sweaters with the big knit lol.
Click to expand...
Click to collapse
Hahaha haven't had one of those since I was 6 (ninja turtles FTW!). Sweetness, looks like I found my next case then.
Thanks for all the help! XD
Sent from my PC36100 using XDA App
GoodandEVO.net did a review on that case a while ago, it was not a positive one.
Not a problem my friend.
Link to GoodandEVO.net review
http://www.goodandevo.net/2010/08/review-pdair-aluminum-case-for-htc-evo-4g.html
To sum it up they didn't like how it looked so it got a bad review. Also they expected super thin mental to not bend. Can anybody confirm lower signal quality?
Drewmungus said:
Link to GoodandEVO.net review
http://www.goodandevo.net/2010/08/review-pdair-aluminum-case-for-htc-evo-4g.html
To sum it up they didn't like how it looked so it got a bad review. Also they expected super thin mental to not bend. Can anybody confirm lower signal quality?
Click to expand...
Click to collapse
got the case yesterday (monaco, black). i haven't noticed any signal loss at all. phone heats up a little faster but i was kinda expecting it.
overall i really love this case. it does add some bulk to the phone but i don't mind at all. kinda feels like it beefs it up some.
Glad you decided to pull the trigger on the case. It's not as bad as these guys make it out to be, is it? Enjoy!
I pulled the trigger one of these when I saw this thread. I like the look and feel of it, but it does have some problems. The main problem I have with it is that it somehow interferes with the antennas in the phone and it absolutely kills me reception/signal strength. I don't have good reception in the building I work in......2 bars is the standard. If I leave my phone inside this case, it drops to 0-1 bars. Within a second of removing it from the case, it goes back up to 2 bars. It doesn't seem to interfere with a WiFi signal, though.
The other thing I don't like is that the latch is fairly easy to open.
With that said, the same day I got it my 2 y/o was playing one of her games the phone and she dropped it onto the concrete The case did its job. However, the impact did cause the door to swing open, but nothing happened to my phone.
I'm not sure if I want to keep it or not. With the slow data services I've been getting since the end of last year, I don't want anything that's going to slow down my phone even more.
Lol... Metal cases on cellphones... Might look cool but not the brightest idea ever, lol

Does your backing plate have any "give"?

mines has a bit of in and out "give" when i press on it. especially right underneath where the camera juts out.
i cant tell if thats the way its meant to be or not. i've not noticed it up until now, but it seems odd. its flush with the back of the device all over, except underneath the camera, where its kind of slack
anybody elses like this?
mine is. Its not a big deal. Thats the closest to a physical flaw and i dont even consider it that.
Sent from my Galaxy Nexus using xda premium
yeah, i figured
i just never remembered it doing that for the last week and i was worried i'd broken a clip inside or something
Yes, around where the camera is at on the left side! =)
Mine has it too
Not on mine...my cover is snug.
Slight creaky-ness to it around the edge, just below and to the right of the camera!
There are two types of back covers. One with the Google and Samsung words written Dully. One Bright. The bright one has none of that push in and out feel. The dully written one does. That's my experience with the backcovers....
mine is snug no movement
Sent from my Galaxy Nexus using Tapatalk
Hmmm interesting
Sent from my Galaxy Nexus using XDA App
mines seems like it has just a lil tiny bit of give.. maybe the extended battery at verizon will fit?
BiGMERF said:
mines seems like it has just a lil tiny bit of give.. maybe the extended battery at verizon will fit?
Click to expand...
Click to collapse
Not on an HSPA+ version. They are two totally different shaped batteries.

The water proof thread

So to kick it off, I've got two "pouches" that are supposed to be watertight. I haven't checked if they are actually water proof, but I can say something about the fit (or misfit).
1. Had the Hagløfs Watatait for the S1. Plastic made it impossible to insert the phone. I had to use a metallic case on the phone to get it in the pouch.
The S3 have the same problem. Its slightly less "clingy", but edges on phone get stuck before fully inserted. There is no room for a phone with case.
2. Got the Overboard case from mobilefun. S3 slides nicely into the pouch. Locking feels safe enough, to the point of being over-engineered. The clear plastic window is slightly small, making it hard to pull down the notification menu. Also a bit fiddly to find the power and volume buttons.
Its also a very tight fit. I suspect its made for the iphone, with room for protection for that phone. Any case that offer enough protection for the S3 make it too big for this pouch.
So anyone else have a watertight pouch case they want to share with the rest of us?
I'm a biker, after much trial and error I found the Northcore surfing cases and bought one for my old phone (Desire). Got my S3 today and while tight it does fit the bare phone with no problems and leaves it easily operable. I usually have the phone strapped to my left forearm and have some capacitive thread stitched into the index finger of the right glove and a bluetooth headset for sound. Add in Tasker to deal with automation and it makes the phone really easy to use.
This is the beastie:
CLICKY
I'm hoping Liquidpel will be available for this device. http://www.liquipel.com/
Basically they coat the entire phone + internals with hydrophobic material, that way even when water gets into the phone, it remains working.
I used a waterproof pouch when I was on my last cruise. Put my epic touch in it and went snorkeling for hours with it in my pocket. It was under water the whole time, no leaks. I bought it from Amazon.com.
Sent from my SPH-D710 using xda premium
tarmacsurfer said:
I'm a biker, after much trial and error I found the Northcore surfing cases and bought one for my old phone (Desire). Got my S3 today and while tight it does fit the bare phone with no problems and leaves it easily operable. I usually have the phone strapped to my left forearm and have some capacitive thread stitched into the index finger of the right glove and a bluetooth headset for sound. Add in Tasker to deal with automation and it makes the phone really easy to use.
This is the beastie:
CLICKY
Click to expand...
Click to collapse
The tight fit is a problem, to be ideal, it should be room for something like Otterbox defender or Ballistic-whatever-its-name-was. A drop in one of the pouches with bare phone is nearly as bad as a drop of the bare phone, and SIII doesn't take a lot of abuse on its own.
So looking for something with a bit more room, that still have decent opening to operate the screen.
I suspect you'll have problems finding anything that big, the S3 isn't a small handset to start with and by the time it's cased up it doubles the bulk.
Good luck :good:
If your looking for waterproof bag i have been using a type of waterproof ziplock for years. its called Aloksak. I have swam across rivers a few time and my gear in it is always dry.
Its certified waterproof to 60 metres and tested by the Navy Diving Unit.
I got mine through amazon and there are alot of sizes some even can fit a rifle. I have some that are really beat up scratches and stretch marks from sharp object and they are not even leaking.
Screen is 100% usable and its dirt cheap.
I am looking for a decent water proof case myself. I have ran across the drycase from drycase.com and have contacted them in an attempt to verify that the s3 will fit in the standard case without having to get the tablet sized one.
It does not offer drop protection however they say its rated to 100 feet (30 meters) so i should be able to take this on a 40 foot reef dive.
I really want to get rid of my camera housing as its for an old sony 5mp camera that barely works anymore.
Drycase
I just received my Drycase from Amazon. So far here are my thoughts on it with the S3. I have never owned a waterproof case like this before so perhaps some of these issues are common to cases like this. Keep in mind I have only had the case for a couple hours so these are just my initial impressions.
1. It is a little difficult to get the phone into and out of the case. It sticks to the plastic sides of the case.
2. Although the Drycase sales rep told me that the S3 would fit in the case and it does for the most part, it is hard to get it far enough into the case so that you can connect the headphone adapter and still have it be out of the way of the top black flap and closing mechanism.
3. Once the phone is in the case and the air is pumped out, the plastic sides of the case fit pretty tight to the body of the phone. This is nice as it makes the screen easy to see, however it also makes the volume and power buttons on the sides of the case difficult to press. I was trying to use the case to take underwater photos and video and because you can not use the touch screen when underwater I mapped the volume down button to the camera shutter, but it was difficult to press this button when the phone was in the case.
4. When the headphone/microphone jack inside the bag is connected to the phone any sound you record with a video will not be recorded since I assume the internal microphone is disconnected. So if you want sound with video you would need to either not plug in the internal cable or connect an external mic. Not a big deal for shooting underwater but if you are going to be moving between above and below water you may want to just leave this cable disconnected.
Anyone seen or tried this pouch?
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=271017216379
I like that it has both an armband and lanyard.
komugi said:
I'm hoping Liquidpel will be available for this device. http://www.liquipel.com/
Basically they coat the entire phone + internals with hydrophobic material, that way even when water gets into the phone, it remains working.
Click to expand...
Click to collapse
That's super cool. If you look they do have it for the s3.
Sent from my SCH-I535 using xda app-developers app
unique77 said:
That's super cool. If you look they do have it for the s3.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I've seen this before. Some people swear by it.
I have this
http://www.amazon.com/gp/product/B004QWY644/ref=oh_details_o04_s00_i00
and this
http://www.amazon.com/gp/product/B008D532ZO/ref=oh_details_o00_s00_i00
works great!!
I have been able to swim around in the pool, go underwater and still hear my music, can make calls too, need to keep the mic out of the water, otherwise they cant here you.
Also , FYI, when you are under water, you cant use the phone well, it just wont pick up your print.
I have decided to start surfing and never go anywhere unless I have my phone and headphones. I have been debating on ordering this. http://pages.ebay.com/link/?nav=item.view&id=350585644786 I think music might help with the frustration of learning.
Sent from my SPH-L710 using xda premium
crzy619 said:
I have decided to start surfing and never go anywhere unless I have my phone and headphones. I have been debating on ordering this. http://pages.ebay.com/link/?nav=item.view&id=350585644786 I think music might help with the frustration of learning.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
yea, I got something like that, the H2O headphones are nice because they have a Mic on them, and the bag has compression clips on snapps, I love mine!
eatonjb said:
I have this
http://www.amazon.com/gp/product/B004QWY644/ref=oh_details_o04_s00_i00
and this
http://www.amazon.com/gp/product/B008D532ZO/ref=oh_details_o00_s00_i00
works great!!
I have been able to swim around in the pool, go underwater and still hear my music, can make calls too, need to keep the mic out of the water, otherwise they cant here you.
Also , FYI, when you are under water, you cant use the phone well, it just wont pick up your print.
Click to expand...
Click to collapse
How do you get the headphone line out of the OB pouch? The one with integrated headphone jack looks interesting. Maybe the Note-sized pouch is big enough for a S3 with a Ballistics case. Worth a try?
I forgot what its called but I seen a website that will take apart your phone and water proof the components so you don't have to have a waterproof case on. Just take the bare phone swimming with you n you're good
Sent from my SCH-I535 using Tapatalk 2
---------- Post added at 10:21 AM ---------- Previous post was at 10:21 AM ----------
I remember the starting price for it is like $60 or $70 tho
Sent from my SCH-I535 using Tapatalk 2
xXJay_RXx said:
I forgot what its called but I seen a website that will take apart your phone and water proof the components so you don't have to have a waterproof case on. Just take the bare phone swimming with you n you're good
Sent from my SCH-I535 using Tapatalk 2
---------- Post added at 10:21 AM ---------- Previous post was at 10:21 AM ----------
I remember the starting price for it is like $60 or $70 tho
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I know where you saw it: a couple posts up in this thread..
scarrmrcc said:
I know where you saw it: a couple posts up in this thread..
Click to expand...
Click to collapse
Wow sorry lmao I thought it was a different thread. I guess I shouldn't be typing responses when I'm extremely tired -.-
Sent from my SCH-I535 using Tapatalk 2
Snuble said:
How do you get the headphone line out of the OB pouch? The one with integrated headphone jack looks interesting. Maybe the Note-sized pouch is big enough for a S3 with a Ballistics case. Worth a try?
Click to expand...
Click to collapse
THERE IS A wire on the inside that connects to the external one. I'musing it now
== Yea.. I tapped that!

aluminum & carbon fiber luxury case

Just stumbled upon this on ebay already ordered mine will upload pics as soon as i get it.
i got the black back and silver frame
http://www.ebay.com/itm/Luxury-Alum...Cell_Phone_PDA_Cases&var=&hash=item3f2750f1db
Look nice. Waiting for your review.
Sent from my HTC One using xda app-developers app
so i kept a lookout and found another one from the same company. really nice cases here
http://www.ebay.com/itm/Luxury-Delu...Cell_Phone_PDA_Cases&var=&hash=item2ec94ad39a
johnnyboyya said:
Just stumbled upon this on ebay already ordered mine will upload pics as soon as i get it.
i got the black back and silver frame
http://www.ebay.com/itm/Luxury-Alum...Cell_Phone_PDA_Cases&var=&hash=item3f2750f1db
Click to expand...
Click to collapse
Got this case in all silver and all black. Both look very girly with the studs on the side. It's a nice case, but it was way too flashy.
deliciousj said:
Got this case in all silver and all black. Both look very girly with the studs on the side. It's a nice case, but it was way too flashy.
Click to expand...
Click to collapse
Does it affects the phone signal ?
2 things:
1) Phone signal. Both CF and AL are NOT RF transparent.
2) IR blaster. It's covered.
That is all.
Dam, i thought it might but i really liked the look of it can u up a pic or 2?
Sent from my One using xda app-developers app
johnnyboyya said:
Dam, i thought it might but i really liked the look of it can u up a pic or 2?
Click to expand...
Click to collapse
This in theory. I don't have the case. All I'm saying is, unless the people who designed this case are absolute genii, this case is either a) going to have signal issues or b) be made out of materials other than just CF and AL.
Just recieved mine today, the red with black back, im not keen as it makes the phone look quite big, reception wise i didnt keep it on long enough to fully tell, but it did knock a bar off my reception, also ir/power button is metal so ir blaster will not work with case on.
Sent from my HTC One using xda premium
jadaress1 said:
Just recieved mine today, the red with black back, im not keen as it makes the phone look quite big, reception wise i didnt keep it on long enough to fully tell, but it did knock a bar off my reception, also ir/power button is metal so ir blaster will not work with case on.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Damn I was about to buy this case too, good thing I checked xda first =\
well reception sucks
HiddenSanctum said:
Damn I was about to buy this case too, good thing I checked xda first =\
Click to expand...
Click to collapse
good thing you didn't buy it, it looks amazing the bad things are,
its incredibly bulky and very bad reception
i usually had 1-2 bars at home not good reception but something.
NOW i have completely no reception. I'm not using this case. it is completely horrible for me.
I even researched online where the antenna of the phone is and the whole back is an antenna, but because of the case all the antennas are touching each other.
Like this phone has the same issue as the iphone 4 (bad grip) signal issue. not complaining i love the phone more then any other phone out there. just with it had better reception or i had better reception at home
http://www.youtube.com/watch?v=f6cqP7rm58g
johnnyboyya said:
good thing you didn't buy it, it looks amazing the bad things are,
its incredibly bulky and very bad reception
i usually had 1-2 bars at home not good reception but something.
NOW i have completely no reception. I'm not using this case. it is completely horrible for me.
I even researched online where the antenna of the phone is and the whole back is an antenna, but because of the case all the antennas are touching each other.
Like this phone has the same issue as the iphone 4 (bad grip) signal issue. not complaining i love the phone more then any other phone out there. just with it had better reception or i had better reception at home
http://www.youtube.com/watch?v=f6cqP7rm58g
Click to expand...
Click to collapse
Its all because of the metal body...sadly we can't defy Physics
Looks fancy! Wait for review too.
johnnyboyya said:
Just stumbled upon this on ebay already ordered mine will upload pics as soon as i get it.
i got the black back and silver frame
http://www.ebay.com/itm/Luxury-Alum...Cell_Phone_PDA_Cases&var=&hash=item3f2750f1db
Click to expand...
Click to collapse
The back cover look too shiny for me, but look forward to seeing your review on metal bumper.
I had some ebay bucks so I grabbed one I will post some pics when i get it and post a review.
DO NOT BUY THIS CASE! I just got mine and it just feels cheap, the "carbon fiber" backing is not good, but I would say the worst part is the chrome sides, if they just left it all one color and didn't have the "bling" studs on the case it would be much better. Also doesn't help as soon as I out it on just for kick my reception tanked. Stay far away, I'm glad I just spend some spare eBay bucks on it and not any money.
Thanks for that I was just about to buy one as well.
In addition to the signal issue and the IR blaster being covered, there may be a third problem -- the noise-cancellation microphone hole on the right upper corner of the back is covered by the case. This will very likely affect the clarity of voice, as the noise cancellation mechanism is impaired.

Categories

Resources