I have a request with a small donation as a reward. I'm not rich, but I can reward with some beer money.
I have managed to somehow delete my build.prop file while rooted and then managed to un-root my device. Naturally, I rebooted.
My request is for anyone with a bit of extra time to modify zergRush so that it does not look to a build.prop file to verify the android version.
If there are any other ideas on how to root a bricked Fire without a build.prop file, be my guest.
My hope is that once I am able to re-root my device, I will be able to mount /system/ as writeable and then be able to push in a build.prop file. However, obviously, until that happens I cannot put in a build.prop file.
If you have any questions I pretty much let it all out on the "How to unblock your kindle" thread.
If no one is able to do this I would understand. This is obviously beyond my technical expertise but I do appreciate any efforts or even suggestions. Even if there's no attempts made here, it is still shocking how much help is given on this forum.
EDIT: I was able to get my hands on a valid system.img and then flashed the system.img to my system partition. Doing so corrected my build.prop and my device became bootable. Thanks for all the help.
Did it update to 6.2 while in the midst of your needing around?
what does your device do?
Does it show under adb devices?
ajq said:
Did it update to 6.2 while in the midst of your needing around?
Click to expand...
Click to collapse
I updated to 6.2 on Tuesday. I have followed the directions on the "UNBRICK your kindle" thread. I have done that successfully. However, because my build.prop is missing, I can no longer re-root using zergRush. I believe that fastboot as directed in that thread restores the kindle to factory settings. I'm not quite sure if factory settings is 6.2 or if it goes all the way back to 6.0.
death2all110 said:
what does your device do?
Does it show under adb devices?
Click to expand...
Click to collapse
This is the post I created in the "How to unbrick your kindle" thread. It should answer most questions. I can use adb shell on the device but I cannot mount anything and SU responds "permission denied".
----from the other thread----
I am in a similar situation and am trying to work through it. I thought I rooted my device but when I restarted it, it didn't fully load. I've successfully done all of the steps listed in the OP but am still suck in a black screen (it's lit...but it's black) loop.
I believe I have deleted my build.pop file but have a backup listend as build.prop.bak. However, the device is trying to load and is failing. I need to rename my build.prop.bak as the primary build.prop. I have tried to access SU through ADB but am getting "permission denied" almost as if my device wasn't rooted.
I have tried to mount system as RW but I am also getting permission denied.
Any advice. Here is my /system/
:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Admin>cd \KindleFireRoot\files
C:\KindleFireRoot\files>adb shell
adb server is out of date. killing...
* daemon started successfully *
$ cd /system/
cd /system/
$ ls -l
ls -l
drwxr-xr-x root root 1970-01-01 00:00 lost+found
drwxr-xr-x root root 2011-12-01 19:03 app
drwxr-xr-x root shell 2011-12-01 19:03 bin
drwxr-xr-x root root 2011-11-30 01:16 etc
drwxr-xr-x root root 2011-11-30 01:16 fonts
drwxr-xr-x root root 2011-11-30 01:16 framework
drwxr-xr-x root root 2011-11-30 01:16 lib
drwxr-xr-x root root 2011-11-30 01:16 media
drwxr-xr-x root root 2011-11-30 01:16 tts
drwxr-xr-x root root 2011-11-30 01:16 usr
drwxr-xr-x root shell 2011-11-30 01:16 vendor
drwxr-xr-x root shell 2011-12-01 19:03 xbin
-rw-r--r-- root root 2143 2008-08-01 12:00 build.prop.bak
$
EDIT: I have tried to re-root through the method provided as well as superoneclick root, but both have failed because no android system is being recognized. This may have to do with the lack of a proper build.prop on my device.
EDIT2: I figure the above might not be enough information so I will now post what I have done so far to get it bricked, and what I have already tried.
1. I tried the rooting method on rootkindlefire.com and it seemed successful. I then was able to set /system/ as RW via root explorer. I copied a modified build.prop file that is available in the android development forums. However, unfortunately, I believe I may have edited the name of this file or done something wrong in handling it accidentally. Regardless, I pasted this file in the /system/ folder and renamed my original build.prop file to build.prop.bak. I then restarted my kindle fire. Now, it shows the kindle fire screen for a second and then goes black entirely. It is still on (the screen is lit), but the screen is black. It then remains like this until I do a hard reset and then it repeats this process.
2. I have tried to access SU but have been unable to do so. I have been unable to mount system as RW using the instruction a page back. In both situations I get the "permission denied" response from the command line.
3. Everytime I try to root using the method provided in the OP, I get a message saying that it can't find android 2.2 or 2.3
4. I am unable to root again using super click for the same reason.
5. I have otherwise been able to follow all of the steps in the OP successfully, but to no avail. My screen goes black after it shows the kindle fire screen for a couple seconds.
6. Any suggestions would be very very helpful. From my amateur amount of knowledge, it seems to me that I don't have a build.prop in my /system/ but am unable to rename or access my build.prop.bak so that I can set it as the regular bootable build.prop. This is because, even though I thought I had it rooted, I am unable to set the /system/ directory as writable.
7. ANY SUGGESTIONS OR HELP WOULD BE GREAT!
Just as a disclaimer: I acknowledge I'm a moron for not verifying everything when I pushed in a build.prop file into my /system/ folder and restarted. No need to call me names
For those who know a bit more than me...
Would pushing the 6.2 update (or any of the downloadable firmware) to the kindleupdates folder in the sdcard and then rebooting fix my problem? I remember reading that the updates re-writes the build.prop which would fix my situation.
Of course, do you need root permissions to be able to write to the sdcard? I only ask this because I can not get the sdcard to actually show up on my desktop. I would need to push it via terminal or adb shell.
Anyone know if this would work?
I am beginning to realize that I may actually still have root, but since I can't boot up the phone, I can't fill out the superuser access dialog that usually comes up when a program tries to access superuser. I had root before I caused the build.prop problems, but figured that I had somehow lost it when I tried to access SU from ADB. Anyone know of a way to bypass this access dialog?
I checked the root status with OneClickRoot after OTA reported my KF was still rooted (just to be sure) and then re-installed Superuser and pushed the necessary Android APKs back to /system/app and it was working again.
damianarnold said:
I checked the root status with OneClickRoot after OTA reported my KF was still rooted (just to be sure) and then re-installed Superuser and pushed the necessary Android APKs back to /system/app and it was working again.
Click to expand...
Click to collapse
How did you re-install Superuser if you're not able to fully boot up the KF? To be clear, when I try to root with superoneclick it says i'm rooted (and if i try and continue it fails...) but whenever I type in adb shell and then su I get "permission denied."
ejrubin said:
How did you re-install Superuser if you're not able to fully boot up the KF? To be clear, when I try to root with superoneclick it says i'm rooted (and if i try and continue it fails...) but whenever I type in adb shell and then su I get "permission denied."
Click to expand...
Click to collapse
My Fire was fully booted up. Did you remove and reinstall Superuser?
damianarnold said:
My Fire was fully booted up. Did you remove and reinstall Superuser?
Click to expand...
Click to collapse
Don't think our KF were in the same state. I don't have a build.prop to boot my KF into so I can't manage superuser at all (I do, however, have a totally useless build.prop.bak that is sitting there in the directory. ) I have the superuser.apk in there so it seems as though I'm rooted but I still can't get into SU via adb.
Can't get Write access to /System or /SDCard
ejrubin said:
Don't think our KF were in the same state. I don't have a build.prop to boot my KF into so I can't manage superuser at all (I do, however, have a totally useless build.prop.bak that is sitting there in the directory. ) I have the superuser.apk in there so it seems as though I'm rooted but I still can't get into SU via adb.
Click to expand...
Click to collapse
Still having the exact same problem! Was able to get the build.prob.bak pulled from /system but can't rename it and push it back to hopefully get this working again.
I am starting to think I may have to send this KF back soon if I don't get it working again.
Any help anyone can provide would be great.
I'm thinking since we are able to get into fastboot, do any developers know if it is possible to push in a new system.img via fastboot? This would solve our build.prop problems no? Any developers know if this is possible?
I would like to compile zergRush myself, but I don't know how to compile Android binary.
It seems require linux to do so.
Can you adb push to the sdcard?
Sent from my DROID Pro using XDA App
JackpotClavin said:
Can you adb push to the sdcard?
Sent from my DROID Pro using XDA App
Click to expand...
Click to collapse
No , I think the sdcard is not yet mount. Tried cd sdcard and it's not possible.
Is it possible to mount it without root? Cause when we try to mount system folder it's permission denied.
And I'm afraid the system won't run the official update even the patch is inside the sdcard folder.
I think ejrubin's idea on how to fix our bricked kindle fire is completely right , we just need either one of the following :
1. A zergRush binary won't check the build.prop to let us run root and mount the system folder
2. Since we can get into fastboot, I think we need a correct update.zip or system.img to fix it. Any idea to build it from kindle's official update?
Well try "mount sdcard" in the shell. If you can push the update, you can idme bootmode into 0x5001 and it'll take the update in recovery mode
If that doesn't work I'll give a custom zerg a shot
Edit: I got it. If you wanna flash my clockwork build in fastboot and set the fastboot to boot into recovery, you can access your /system through recovery, I do it all the time
It'll be a fastboot flash recovery <the name of the recovery.img I'll post later when I get home>
From there you will have to:
Adb shell
Mount system
Mv /system/build.bak /system/build.prop
Sent from my DROID Pro using XDA App
JackpotClavin said:
Well try "mount sdcard" in the shell. If you can push the update, you can idme bootmode into 0x5001 and it'll take the update in recovery mode
If that doesn't work I'll give a custom zerg a shot
Edit: I got it. If you wanna flash my clockwork build in fastboot and set the fastboot to boot into recovery, you can access your /system through recovery, I do it all the time
It'll be a fastboot flash recovery <the name of the recovery.img I'll post later when I get home>
From there you will have to:
Adb shell
Mount system
Mv /system/build.bak /system/build.prop
Sent from my DROID Pro using XDA App
Click to expand...
Click to collapse
If i just type "mount sdcard" it cannot recognize the command.
if try to mount it with -t and mount it to other folder, it just say permission denied.
Of course I wanna flash your clockwork build!!
Would you mind to guide us with all the step when you're ready? Because I'm quite new to root android machine.
Really thanks for your help!!!!!!!!!!!!!!!!
Yeah **** sorry guys can this wait till tomorrow? Sorry I said tonight, I got side tracked tonight
Sent from my DROID Pro using XDA App
Related
Phone: Incredible 2, running Android 2.3.3 Stock Verizon ROM
S-OFF and Rooted : using revolutionary 0.4pre4
HBoot: 6.13.1002
Recovery: Revolutionary CWM 4.0.1.4
I'm having ROOT Access/SU problems. I need access to some files in the root/System/ directory and am unable to get r/w.
I s-off/rooted my Incredible 2 using the instructions on this tutorial http://forum.xda-developers.com/showthread.php?t=1219246 (The How To Root DInc2) and the instructions on the revolutionary.io website. (Essentially: Get S-Off via revolutionary> flash recovery CWM> flash su.2.3.6.3-efgh)
The revolutionary s-off process was successful and I got s-off.
I flashed Superuser su.2.3.6.3-efgh-signed.zip and seem to have Root. The binaries are upto date according to the app.
I have Titanium Backup, Root Check, BusyBox Installer installed. I had to install Busybox. All these apps run properly. I can wipe, backup, and install system app data via Titanium Backup. Root Check says I have root access and the correct Busybox location.
The Problem
I installed Root Explorer today and I am successfuly able to change from R/O to R/W and back on the root directory and on the SDCard. But when I go to the System directory I cannot change from R/O to R/W.
Tryed to connect to the Inc2 from my PC (winXP) via ADB. ADB Devices command shows my device. When in ADB Shell the default profile is $. When I type in SU I get back the message "SU: permission denied" I do not get a prompt from Superuser on the phone to give access.
(To see if the problem was in the steps I was doing I tried this on my rooted Incredible 1 and in Root Explorer I was successfully able to remount the System directory from R/O to R/W and back. But the same problem with ADB I have on both Inc1 and Inc2. (Inc1 was s-off/rooted with Unrevoked3/Unrevoked Forever, with su.2.3.6.1-ef-signed.zip.)
I'm not sure what went wrong where, since some of the root access is working. Any suggestions? Help?
Thanks,
that happen to me before. and the only way to change the r/o to r/w is going back to stock,if you have a stock back up rom you have to run that one,and then you can install the rom you want,and the you can change with root explorer s/o to r/w.if you dont have a stock back up you have to install the PG32IMG,and then you have to go to revolutionary and install the recovery.dont forget to turn off the fast boot.if you dont know how to do that,setting,power,and then uncheck the fast boot to off.
I dont think your binaries are up to date.
Try installing SuperUser 3.0 and report back - with updated binaries. The binaries should show at least verison 3.
I had issues to with the Root access that came with revolutionary and this worked for me.
You are on the right path though.
I'd like to try and avoid flashing the original Verizon ROM back on the phone. I'll leave that for last resort. There is stuff that I've done to the phone that I would rather not have to go through to do again.
In Superuser I tap on the 'check for binary updates', the respone after checking is that the 'su is up to date'. The version that I'm currently using su.2.3.6.3-efgh-signed.zip the files are modified in 2008 and 2011. So it seems to be upto date.
Is there a place I can download the latest version of Superuser 3.0?
The version of Superuser3.0 that I was able to find, when I open the zip file, shows all the files last modifed in 2008.
You wont have to flash back.
Follow my advice and install the new SuperUser on the market. It is 3.0.
Once in the application go to update binaries and update anyway.
Reboot and let us know how it works.
Those 2.3.6.3 binaries didnt work for me either. Now im fine after following my own advice.
Oh - and also - check to make sure that you have allowed specific permission for the application you are having issues with - within SuperUser.
You will be pleased to see that the new SuperUser can automatically grant Root to all of your apps...dangerous, but speeds things up.
@tinkbtrar. Thanks!
Ugrading to the latest Superuser 3.0 and updating the binaries did help! Still some problems, but making progress.
I can connect via adb shell and get SU privileges. # shows up! I think I now have r/w privilege on /system. Not sure, but I think I do. (I'm still learning adb shell and linux commands)
But I still cannot get Root Explorer on the phone to work properly. Same problem as before. I can get r/o and r/w on the root directory, but cannot get r/w on the System directory. The button turns green, but the nothing changes.
I can live with getting SU privileges in adb shell, but it would really be nice to get r/w on System in RootExplorer.
gunnyp said:
@tinkbtrar. Thanks!
Ugrading to the latest Superuser 3.0 and updating the binaries did help! Still some problems, but making progress.
I can connect via adb shell and get SU privileges. # shows up! I think I now have r/w privilege on /system. Not sure, but I think I do. (I'm still learning adb shell and linux commands)
But I still cannot get Root Explorer on the phone to work properly. Same problem as before. I can get r/o and r/w on the root directory, but cannot get r/w on the System directory. The button turns green, but the nothing changes.
I can live with getting SU privileges in adb shell, but it would really be nice to get r/w on System in RootExplorer.
Click to expand...
Click to collapse
Be sure to click thanks if you haven't already. Lol.
Try wiping data...force closing and uninstalling root explorer (thru manage applications...not CWR).
Should take care of it. And because you are rooted you should have full access to filesystem via adb already.
Sent from my Xoom using xda premium
try mount -t ext3 -o remount,rw /dev/block/mmcblk0p25 /system with adb. thatll remount /system as readwrite
Sent from my Incredible 2 using XDA App
@tincbtrar, gave you the thumps-up!
No go with Root Explorer yet.
I wiped data from CWM, uninstalled, and reinstalled Root Explorer, but still could not get r/w on the System directory using Rootexplorer.
Anyone, any ideas/suggestions?
gunnyp said:
@tincbtrar, gave you the thumps-up!
No go with Root Explorer yet.
I wiped data from CWM, uninstalled, and reinstalled Root Explorer, but still could not get r/w on the System directory using Rootexplorer.
Anyone, any ideas/suggestions?
Click to expand...
Click to collapse
trust me you will have to do what i said before in the second post...
gunnyp said:
@tincbtrar, gave you the thumps-up!
No go with Root Explorer yet.
I wiped data from CWM, uninstalled, and reinstalled Root Explorer, but still could not get r/w on the System directory using Rootexplorer.
Anyone, any ideas/suggestions?
Click to expand...
Click to collapse
You paid for Root Explorer. It doesn't work for you. I'd be bugging the developer since it's clearly not doing the job.
@android-incredible
yes, i looking more and more like i may have to flash my rom backup that i made right after s-off. let's see, since i can get su in adb shell i can get done what i need to so reflashing is not utmost urgent.
i'm not sure it's rootexplorer since i've not seen other posts with similar issue. if the flash of the rom backup does not do it, that may then point to rootexplorer. lets see...
Last night I tried to root a Fire (6.3.1) for the first time using KFU and briefly saw something flash by about a problem with check_rooted. Someone on the KFU thread mentioned this also. Does this mean the rooting process is incomplete?
Proceeding further, I attempted to install the optional apps and received permission denied errors when abd went to push the vending GoogleCalendarSyncAdapter and GoogleContactsSyncAdapter apk files to /system/app.
Reading further on the KFU thread, someone else suggested sideloading superuser. I did this and still was unable to manually push the files (following the batch file as a model to mount read/write, push the apps, then mount read-only).
The goal was to add access to Google Play to an otherwise stock 6.3.1 operating system. Short of loading a new rom, is there something else I might try?
SLOmtb said:
Last night I tried to root a Fire (6.3.1) for the first time using KFU and briefly saw something flash by about a problem with check_rooted. Someone on the KFU thread mentioned this also. Does this mean the rooting process is incomplete?
This is typically nothing to worry about. You will receive an error if the "check_rooted" folder didn't exist to begin with. Normal
Proceeding further, I attempted to install the optional apps and received permission denied errors when abd went to push the vending GoogleCalendarSyncAdapter and GoogleContactsSyncAdapter apk files to /system/app.
Reading further on the KFU thread, someone else suggested sideloading superuser. I did this and still was unable to manually push the files (following the batch file as a model to mount read/write, push the apps, then mount read-only).
Click to expand...
Click to collapse
The method for doing this is
Code:
adb root
adb remount
adb push ≤filename1≥ /system/app
adb push ≤filename2≥ /system/app
...when finished...
Code:
adb remount
adb kill-server
The goal was to add access to Google Play to an otherwise stock 6.3.1 operating system. Short of loading a new rom, is there something else I might try?
Click to expand...
Click to collapse
To make things simple, the MoDaCo rom has the exact same interface as stock, except it comes pre rooted with all of the Google apps and services already installed. No work is necessary.
Wow! I'll give it a try tonight. Thanks!
soupmagnet said:
The method for doing this is
Code:
adb root
adb remount
adb push ≤filename1≥ /system/app
adb push ≤filename2≥ /system/app
...when finished...
Code:
adb remount
adb kill-server
To make things simple, the MoDaCo rom has the exact same interface as stock, except it comes pre rooted with all of the Google apps and services already installed. No work is necessary.
Click to expand...
Click to collapse
Well, darn. I tried "adb root" and it says: "adbd cannot run as root in production builds." So I guess it isn't really rooted, after all.
Maybe the MoDaCo rom is the way to go, after all. Thanks, anyway!
adb devices
list of device attached
5A5A5A5A5A5A..... (NOT CORRECT)
adb shell
[email protected]
adb push flash_image /dev/
failed .... permission denied
adb push recovery.img /dev/
failed .... permission denied
what should I do ?
sabithpkcmnr said:
adb devices
list of device attached
5A5A5A5A5A5A..... (NOT CORRECT)
adb shell
[email protected]
adb push flash_image /dev/
failed .... permission denied
adb push recovery.img /dev/
failed .... permission denied
what should I do ?
Click to expand...
Click to collapse
The which system version?
Sent from my XT894 using Tapatalk
sd_shadow said:
The which system version?
Sent from my XT894 using Tapatalk
Click to expand...
Click to collapse
Thanks for interesting ,,
I am on leave for many days over my exam fear ..
any way , I am having Android 4.1.1 JB tablet
sabithpkcmnr said:
Thanks for interesting ,,
I am on leave for many days over my exam fear ..
any way , I am having Android 4.1.1 JB tablet
Click to expand...
Click to collapse
That's Android version, not system version
Sent from my XT907 using Tapatalk
I have rooted my HTC One X and want to copy files in /system/xbin folder. My phone shows S-ON. And Eclipse is not able to copy files to /system and adb push from shell is also not working. Is there a way I can copy files to /system/xbin?
I am running stock ROM.
My phone is NOT associated with any vendor.
adb remount
adb push filename /system/xbin
Sent from my HTC One X
You can also use es file explorer and go into the options tick up to root and the request root and then tick mount as r/w.
Then just move files as you will.
Sent from my HTC One X using XDA Premium HD app
realunited123 said:
adb remount
adb push filename /system/xbin
Sent from my HTC One X
Click to expand...
Click to collapse
The above way does not seem to work. Whenever I use adb remount(or adb mount) it says operation not permitted and I am trying to this from root privileges
My OS is :- Ubuntu 12.04
ADB(platform-tools) -> Rev 20
If you need anything more please ask me .
Additional Question
treebill said:
You can also use es file explorer and go into the options tick up to root and the request root and then tick mount as r/w.
Then just move files as you will.
Sent from my HTC One X using XDA Premium HD app
Click to expand...
Click to collapse
First of all thanx it worked. I think I will have to live with this way A ADB/Eclipse based would have been cool
Will the files moved from SDcard to phones root in anyway lose and privileges(like losing executable)? If yes, please suggest a way to restore it.
KillerTheLord said:
The above way does not seem to work. Whenever I use adb remount(or adb mount) it says operation not permitted and I am trying to this from root privileges
My OS is :- Ubuntu 12.04
ADB(platform-tools) -> Rev 20
If you need anything more please ask me .
Click to expand...
Click to collapse
When doing adb shell su do you get any toast notification on your phone? Or does it just say denied ?
Strange it works perfectly here Also are you using SuperSU or any other superuser app?
---------- Post added at 03:37 PM ---------- Previous post was at 03:36 PM ----------
KillerTheLord said:
First of all thanx it worked. I think I will have to live with this way A ADB/Eclipse based would have been cool
Will the files moved from SDcard to phones root in anyway lose and privileges(like losing executable)? If yes, please suggest a way to restore it.
Click to expand...
Click to collapse
Yes you need to change the permissions after moving from sdcard. Use Root Explorer(Long press on the file--> Change permissions)
realunited123 said:
When doing adb shell su do you get any toast notification on your phone? Or does it just say denied ?
Strange it works perfectly here Also are you using SuperSU or any other superuser app?
---------- Post added at 03:37 PM ---------- Previous post was at 03:36 PM ----------
Yes you need to change the permissions after moving from sdcard. Use Root Explorer(Long press on the file--> Change permissions)
Click to expand...
Click to collapse
I am using SuperSU as Super User App. And I think I am doing something wrong here. You mentioned about adb shell su. I think I might be wrong here. Here is how I tried to execute the command.
[email protected]: <path to platformtools> ./adb remount
remount failed: Operation not permitted
do I have to raise ADB shell to SU level. If yes, how?
KillerTheLord said:
I am using SuperSU as Super User App. And I think I am doing something wrong here. You mentioned about adb shell su. I think I might be wrong here. Here is how I tried to execute the command.
[email protected]: <path to platformtools> ./adb remount
remount failed: Operation not permitted
do I have to raise ADB shell to SU level. If yes, how?
Click to expand...
Click to collapse
Strange. Are you using the stock kernel ? If that is the case then it does not have insecure adbd (ro.secure=0) so remount will not work. Try a custom kernel.
Does adb has SU permissions from recovery ? Try booting into recovery, mounting the system partitions and try to push something from adb. Check the SuperSU app to update binary but that should not be a problem.
realunited123 said:
Strange. Are you using the stock kernel ? If that is the case then it does not have insecure adbd (ro.secure=0) so remount will not work. Try a custom kernel.
Does adb has SU permissions from recovery ? Try booting into recovery, mounting the system partitions and try to push something from adb. Check the SuperSU app to update binary but that should not be a problem.
Click to expand...
Click to collapse
Yes I have rooted the phone but the ROM is stock(I was thinking to put in CM9 Alpha).
About the second thing. I know how to boot my phone into recovery(Vol Down + Power -> From Screen -> Recovery(ClockwerkMod))
But about the rest I don't know.
Sorry about my annoying questions this is my first time I am dealing with rooting and stuff.
KillerTheLord said:
Yes I have rooted the phone but the ROM is stock(I was thinking to put in CM9 Alpha).
About the second thing. I know how to boot my phone into recovery(Vol Down + Power -> From Screen -> Recovery(ClockwerkMod))
But about the rest I don't know.
Sorry about my annoying questions this is my first time I am dealing with rooting and stuff.
Click to expand...
Click to collapse
I guess you are using stock kernel then. Try franco's or faux's kernel.
adb remount wont work from os on stock boot.img.
After rebooting into recovery go to mounts and storage-->mount /system and then push something from adb. See if that works.
KillerTheLord said:
Yes I have rooted the phone but the ROM is stock(I was thinking to put in CM9 Alpha).
About the second thing. I know how to boot my phone into recovery(Vol Down + Power -> From Screen -> Recovery(ClockwerkMod))
But about the rest I don't know.
Sorry about my annoying questions this is my first time I am dealing with rooting and stuff.
Click to expand...
Click to collapse
I think this app does exactly what you want :
http://forum.xda-developers.com/showthread.php?t=1687590
realunited123 said:
I guess you are using stock kernel then. Try franco's or faux's kernel.
adb remount wont work from os on stock boot.img.
After rebooting into recovery go to mounts and storage-->mount /system and then push something from adb. See if that works.
Click to expand...
Click to collapse
Well this didn't work either. I hope to switch to some other ROM in future(I hate HTC Sense ). But as of now Root Explorer did the job. I mounted my sdcard and copied files to it and used Root Explorer to move files to /system and then changed permissions.
Thanks for help it really made it easy .
make sure your path devs are oke for su.
in terminal run:
sudo su
adb kill-server
adb devices
you should see your HOX HTxxxxx nr.
and here you should be able to connect eclipse to HOX by adb.
NikMel said:
make sure your path devs are oke for su.
in terminal run:
sudo su
adb kill-server
adb devices
you should see your HOX HTxxxxx nr.
and here you should be able to connect eclipse to HOX by adb.
Click to expand...
Click to collapse
The problem was not accessing the device using ADB. The problem was I was not able to write to root system. ES Explorer and Root Explorer both did the job for me. I will be putting the final instructions for the process(detailed ones) soon.
Instructions onw how to copy files to root file system on HTC One X with S-ON
1) Unlock and Root your phone. Follow instructions below
http://www.youtube.com/watch?v=gIeq8Jx28cs
and then
http://www.youtube.com/watch?v=80lMHUgxwww
2) Install ES Explorer(File Manager) Link :- https://play.google.com/store/apps/details?id=com.estrongs.android.pop&hl=en
3) Connect device to computer(even if it is not recognized by ADB/Computer)
4) In Phone select Disk drive option. Now the phone's storage will be mounted on your computer as removable device.
5) Copy the files you want to send to phone's root system to any folder here.
6) Change phone's mode to charge only and wait for 2-3 secs(let phone remount sdcard)
7) Open ES Explorer and open menu(those 3 dots at bottom and select Settings)
8) Tick the following options
Up to Root
Root Explorer
Mount File System
9) A dialog box for permission will open Grant it.
10) Now copy files from /sdcard/<Folder where u put files> to where ever you want o copy files to.
11) Long press on file to change permissions and stuff.
Post here if you are stuck someone will surely help you.
I rooted my kindle fire using kindle fire utility 0.9.6 (after the rooting superuser wasn't installed on my kindle), downloaded twrp, flashed hashcode jelly bean ROM from this link
http://forum.xda-developers.com/showthread.php?t=1766829
and then flashed Superuser-3.1.3-x86-signed.zip which I downloaded from this link
http://androidsu.com/superuser/
but superuser won't work, when I check the root explorer in ES file explorer it tells me that this feature can't work on ur phone
Please I'm really dying out here
Someone Help Pleeeeeeeeeeeeeeeeeease !!!!!
You need the su binary installed as well. But with that being said, why don't you just install the Superuser.apk?
[Edit:] It's late and I'm not paying attention for some reason. Custom ROMs come pre-rooted and you have Jelly Bean installed. Perhaps there's a problem with ES File Explorer?
soupmagnet said:
You need the su binary installed as well. But with that being said, why don't you just install the Superuser.apk?
Click to expand...
Click to collapse
Thank you for replying so fast
how can I install su binary? and about the superuser.apk isn't that what i flashed into my device i have a superuser icon on my desktop but it just won't add any apps to its list.
Thanks again
At the Superuser website, there are three zip files. One is Superuser, one is the su binary, and the other should be both. Not that it matters at this point.
soupmagnet said:
At the Superuser website, there are three zip files. One is Superuser, one is the su binary, and the other should be both. Not that it matters at this point.
Click to expand...
Click to collapse
what do you mean by not that it matters at this point?
can't I just download the zip and flash it?
soupmagnet said:
You need the su binary installed as well. But with that being said, why don't you just install the Superuser.apk?
[Edit:] It's late and I'm not paying attention for some reason. Custom ROMs come pre-rooted and you have Jelly Bean installed. Perhaps there's a problem with ES File Explorer?
Click to expand...
Click to collapse
Maybe you missed this
soupmagnet said:
Maybe you missed this
Click to expand...
Click to collapse
I tried another app called copy paste it and when I try to use it this message appears:
"Your Phone does not appear to be rooted or has not been given root privileges. to use this application please provide root privileges to this applications"
what should I do?
[Edit] ok now i know my device is certainly not rooted i tried orbot, market enabler and market unlocker they all dispatch the same message your device isn't rooted.
can anyone tell me how to root it?
Scarfacew said:
I tried another app called copy paste it and when I try to use it this message appears:
"Your Phone does not appear to be rooted or has not been given root privileges. to use this application please provide root privileges to this applications"
what should I do?
[Edit] ok now i know my device is certainly not rooted i tried orbot, market enabler and market unlocker they all dispatch the same message your device isn't rooted.
can anyone tell me how to root it?
Click to expand...
Click to collapse
I too used the KFU to supposedly root my KF, but when I tried to install Titanium Backup, it gave me the same error message saying that my phone did not have root privileges... I wonder if there is something not installing correctly when using KFU...
"Root" consists of the su binary, which the system uses to give the user root permissions, and Superuser.apk, which keeps a database of what programs you allow to have those permissions. With "su" only, you will still have root permission, but only at the level of command line interface and your apps will not be allowed root permissions. Superuser.apk by itself is worthless. Custom ROMS come pre-rooted so the need to re-root is usually unnecessary unless something happens to one of the above mentioned programs. The only way to be sure if/which one is missing is in recovery via the command line because custom recovery will provide temporary root access.
Code:
adb shell ls /system/xbin
...look for su
Code:
adb shell ls /system/app
...look for Superuser.apk
Superuser can be installed from within the ROM using the .apk (at least in earlier versions it was possible), or in recovery using the command line or by flashing the signed .zip from the superuser website . The su binary can only be installed while in recovery.
Of course it all can be fixed by re-flashing your custom ROM.
It may also be necessary to rename the check-rooted executable, but only if you're running the stock Amazon software.
I think that pretty much covers it.
soupmagnet said:
"Root" consists of the su binary, which the system uses to give the user root permissions, and Superuser.apk, which keeps a database of what programs you allow to have those permissions. With "su" only, you will still have root permission, but only at the level of command line interface and your apps will not be allowed root permissions. Superuser.apk by itself is worthless. Custom ROMS come pre-rooted so the need to re-root is usually unnecessary unless something happens to one of the above mentioned programs. The only way to be sure if/which one is missing is in recovery via the command line because custom recovery will provide temporary root access.
Code:
adb shell ls /system/xbin
...look for su
Code:
adb shell ls /system/app
...look for Superuser.apk
Superuser can be installed from within the ROM using the .apk (at least in earlier versions it was possible), or in recovery using the command line or by flashing the signed .zip from the superuser website . The su binary can only be installed while in recovery.
Of course it all can be fixed by re-flashing your custom ROM.
It may also be necessary to rename the check-rooted executable, but only if you're running the stock Amazon software.
I think that pretty much covers it.
Click to expand...
Click to collapse
Ok now things are getting worse I tried to turn the wifi on and it didn't work, I tried to reboot and power off the tablet but it just won't work
{Edit} I want to know that by re-flashing the ROM is there a guarantee that those problems won't happen again.
One more thing is that I deleted the ROM from my kindle I can't transfer it from my laptop because the kindle hasn't been recognized after the jelly bean and I can't downloaded because wifi isn't working so what should I do
Thanks in advance
Scarfacew said:
Ok now things are getting worse I tried to turn the wifi on and it didn't work, I tried to reboot and power off the tablet but it just won't work
I want to know that by re-flashing the ROM is there a guarantee that those problems won't happen again.
Thanks in advance
Click to expand...
Click to collapse
There are never any guarantees when it comes to computers and system software, but the LIKELINESS is very high that the problem will be fixed.
soupmagnet said:
There are never any guarantees when it comes to computers and system software, but the LIKELINESS is very high that the problem will be fixed.
Click to expand...
Click to collapse
One more thing is that I deleted the ROM from my kindle I can't transfer it from my laptop because the kindle hasn't been recognized since I flashed the jelly bean and I can't downloaded because wifi isn't working so what should I do
Thanks in advance
Boot into recovery and "mount" your sdcard to USB. The computer should still recognize it.
soupmagnet said:
Boot into recovery and "mount" your sdcard to USB. The computer should still recognize it.
Click to expand...
Click to collapse
I re-flashed the Rom, wifi is working so I dl ES file explorer and checked Root explorer, but when superuser request popped, I clicked allow but it didn't work it gave me the same message, the new thing is that superuser app added es file explorer to its list but I still can't copy apps in the app/system file.
I know I bored you to death and I'm really thankful for ur help but I really need the root.
Scarfacew said:
I re-flashed the Rom, wifi is working so I dl ES file explorer and checked Root explorer, but when superuser request popped, I clicked allow but it didn't work it gave me the same message, the new thing is that superuser app added es file explorer to its list but I still can't copy apps in the app/system file.
I know I bored you to death and I'm really thankful for ur help but I really need the root.
Click to expand...
Click to collapse
Ok, well try a different ROM. If the problem persists then we can try to think of something.
I flashed the Alien droid ROM it's working fine till now but I need to know how to install an arabic keyboard please
Thanks
Ok, I have a dumb question, but from where do you run the DOS commands from? (ie. what directory?)..
c:\KFU?
Right-click on your KFU folder and select properties to find the folder's path. It may be different depending on wherever you've installed it.
soupmagnet said:
Right-click on your KFU folder and select properties to find the folder's path. It may be different depending on wherever you've installed it.
Click to expand...
Click to collapse
Thanks. but not sure i understand.
Here is what I'm attempting to do.. using the root method described here: http://forum.xda-developers.com/showthread.php?t=1638452 under "Getting to fastboot mode" there are a series of command line examples that seem to start with adb.... (ex. adb shell chmod 755 /data/local/tmp/fbmode).
Under Rooting the stock software, the first step command line is "adb shell mount system"
my question is from where do I start (directory) so that when I enter these commands they work?
Or are you saying that I need to fun all these from the KFU directory? (or KFU/tools) or some other directory..
I appreciate the help and feedback..
:h my::
Wherever adb is...Right-click on that folder to find it's path so you can "cd" or change directories to it. Alternatively, you can Shift + Right-click on that folder and select something like "Open command window here".
[HOW-TO] [GSM & CDMA] How to root without unlocking bootloader (for ITL41D to JRO03O)
As of Oct 10, 2012: Google has patched this vulnerability starting with JRO03U. That is to say, this works on versions of ICS and JB from ITL41D to JRO03O inclusive. It will not work for JRO03U or newer. (My previous guide found here only worked on Android versions 4.0.1 and 4.0.2, i.e., ITL41D/F and ICL53F.
Once you have root, you can use segv11's BootUnlocker app to unlock your bootloader without wiping anything. Easy as pie!
Disclaimer: I take no credit for this exploit or the implementation of it. All credit goes to Bin4ry and his team. I just isolated the parts required for the GNex, modified it slightly and eliminated the script.
So, it looks like Bin4ry (with the help of a couple of others) has managed to find a way to exploit a timing difference in the "adb restore" command. See source here. (Although this may be old news to some, I hadn't seen it before a few days ago.) This is more for informational purposes, as having a Nexus device, we are able to backup our data, unlock the bootloader and restore the backup, so this is guide is not really that useful for most, but you still have those users who are scared to unlock their bootloader. It is useful however, for those with a broken power button, as it allows them to unlock their bootloader without the power button.
How this works
The way this works is as follows: the "adb restore" command needs to be able to write to /data to restore a backup. Because of this, we can find a way to write something to /data while this is being done. Now, Android parses a file called /data/local.prop on boot. If the following line exists in local.prop, it will boot your device in emulator mode with root shell access: ro.kernel.qemu=1. So, if we can place a file called local.prop with the aforementioned line in /data, once your device boots, it will boot in emulator mode and the shell user has root access, so we now can mount the system partition as r/w.
So what does this all mean:
You can now root any version of ICS and JB released to-date without having to unlock your bootloader (and without losing your data).
Moreover, you should now be able to root your device even if your hardware buttons are not working.
Additionally, this allows those who have not received an OTA update and want to apply it without having an unlocked bootloader or root to do so by copying the OTA update to /cache from /sdcard.
Notes:
1) Please read the entire post before attempting this.
2) This does not wipe any of your data, but I take no responsibility if something happens and you lose your data. Maybe consider doing a backup as per this thread before attempting this.
3) This assumes that you have USB Debugging enable on your device (Settings > Developer Options > Enable USB Debugging) and the drivers for your device installed on your computer. For the drivers, I would recommend you remove all old drivers and install these. If you don't know how to install them, or are having issues, look here.
4) This obviously needs to be done over ADB, as you cannot run adb in a terminal emulator on-device. If you do not have ADB, I've attached it in the zip (Windows and Linux versions). Unzip all files.
Step-by-step:
1) Download the attached files to your computer and unzip them;
2) Open a command prompt in that same directory;
3) Copy the root files to your device:
adb push su /data/local/tmp/su
adb push Superuser.apk /data/local/tmp/Superuser.apk
4) Restore the fake "backup": adb restore fakebackup.ab Note: do not click restore on your device. Just enter the command into the command prompt on your PC and press the enter key.
5) Run the "exploit": adb shell "while ! ln -s /data/local.prop /data/data/com.android.settings/a/file99; do :; done" Note: when you enter this command, you should see your adb window flooded with errors -- this is what is supposed to happen.
6) Now that the "exploit" is running, click restore on your device.
7) Once it finishes, reboot your device: adb reboot Note: Do not try and use your device when it reboots. Running this exploit will reboot your device into emulator mode, so it will be laggy and the screen will flicker -- this is normal.
8) Once it is rebooted, open a shell: adb shell
Note: Once you do step 8, your should have a root shell, i.e., your prompt should be #, not $. If not, it did not work. Start again from step 4. (It may take a few tries for it to work. Thanks segv11.)
Now we can copy su and Superuser.apk to the correct spots to give us root.
9) Mount the system partition as r/w: mount -o remount,rw -t ext4 /dev/block/mmcblk0p1 /system
10) Copy su to /system: cat /data/local/tmp/su > /system/bin/su
11) Change permissions on su: chmod 06755 /system/bin/su
12) Symlink su to /xbin/su: ln -s /system/bin/su /system/xbin/su
13) Copy Superuser.apk to /system: cat /data/local/tmp/Superuser.apk > /system/app/Superuser.apk
14) Change permissions on Superuser.apk: chmod 0644 /system/app/Superuser.apk
15) Delete the file that the exploit created: rm /data/local.prop
16) Exit the ADB shell: exit (May have to type exit twice to get back to your command prompt.)
17) Type the following (not sure if this is needed for the GNex, but it shouldn't matter): adb shell "sync; sync; sync;"
18) Reboot: adb reboot
19) Done. You now should have root without having to unlock your bootloader. If you want to unlock now, you can without wiping anything. See segv11's app linked at the beginning of this post.
Note: If you still do not have root access after doing these steps, redo them and add this step between 10 and 11:
10b) Change the owner of su: chown 0.0 /system/bin/su (Thanks maxrfon.)
I've done all. It installs supersuser app but the phone is not really rooted and apps that requires it doesn't work
Lorenzo_9 said:
I've done all. It installs supersuser app but the phone is not really rooted and apps that requires it doesn't work
Click to expand...
Click to collapse
Did you try opening the Superuser app?
What happens when you open an app that requires root? Do you get the request for su access?
You can open the app but whith apps that requires root there are no requestes and they don't... Even using root checker you see that you're not rooted
Lorenzo_9 said:
You can open the app but whith apps that requires root there are no requestes and they don't... Even using root checker you see that you're not rooted
Click to expand...
Click to collapse
Re-run the entire procedure again (including pushing the su and Superuser.apk files). When I had done it, I used the latest version of su and Superuser.apk, but when I uploaded the files in the attachment in post #1, I used the files that Bin4ry had in his package, which I assume are older. Regardless, re-download the attachment in the first post and try it again.
efrant said:
Re-run the entire procedure again (including pushing the su and Superuser.apk files). When I had done it, I used the latest version of su and Superuser.apk, but when I uploaded the files in the attachment in post #1, I used the files that Bin4ry had in his package, which I assume are older. Regardless, re-download the attachment in the first post and try it again.
Click to expand...
Click to collapse
Ok I'll do it and then I'll report you what happens. So now have you updated su and superuser.apk?
Lorenzo_9 said:
Ok I'll do it and then I'll report you what happens. So now have you updated su and superuser.apk?
Click to expand...
Click to collapse
Yes, I put the latest versions in the zip in the first post.
I can confirm that this works, and also that step 10b was not needed for me. This is the first time I have not used a toolkit so if I can do it, anyone can.
Running a Verizon Galaxy Nexus, this allowed me to update to the leaked Jelly Bean OTA with a locked bootloader. I first flashed stock 4.0.4 and locked the bootloader. I then used the exploit to gain root access, allowing me to apply IMM76Q and JRO03O OTA updates via stock recovery. (Rebooting between updates.) Thank you for creating a guide that this newb could easily understand and follow.
serty4011 said:
I can confirm that this works, and also that step 10b was not needed for me. This is the first time I have not used a toolkit so if I can do it, anyone can.
Running a Verizon Galaxy Nexus, this allowed me to update to the leaked Jelly Bean OTA with a locked bootloader. I first flashed stock 4.0.4 and locked the bootloader. I then used the exploit to gain root access, allowing me to apply IMM76Q and JRO03O OTA updates via stock recovery. (Rebooting between updates.) Thank you for creating a guide that this newb could easily understand and follow.
Click to expand...
Click to collapse
Thanks for confirming that step was not needed.
Thanks!
Bookmarked for future reference :good:
does it work on nexus 7 ?
dacc said:
does it work on nexus 7 ?
Click to expand...
Click to collapse
Yes, it should.
thans for quick response
Works fine for my GNex, big thanks! How about putting it into a script for non-advanced users here?
wictor1992 said:
Works fine for my GNex, big thanks! How about putting it into a script for non-advanced users here?
Click to expand...
Click to collapse
Glad you got it working!
As for putting it into a script, I could but I'd rather not. As with most of the guides that I have written up, I purposely do not put things into a script so that people would actually go through all the steps and, by doing so, maybe get an understanding of what they are actually doing, and hopefully learn something in the process. If I would have packaged it up into a script, a lot of the less experienced users would not even try to go through the steps -- they would just use the script, and no one learns anything yet again. See here for some discussion on one-click scripts. Granted, blindly following a step-by-step is not much better, but I have tried to put comments and explanations throughout to facilitate learning. It's about the journey...
P.S.: I would appreciate it if no one else posts a script in this thread.
efrant said:
P.S.: I would appreciate it if no one else posts a script in this thread.
Click to expand...
Click to collapse
can i make a script that just puts in big text "STOP USING TOOLKITS AND 1 CLICKS"
Zepius said:
can i make a script that just puts in big text "STOP USING TOOLKITS AND 1 CLICKS"
Click to expand...
Click to collapse
LOL! Yes, sure, that's one script I don't mind being posted. LOL!
Heh, fair enough. I think I'm learning a bit about adb
One question: I can't replace system APKs by installing them, it tells me that there is a signature conflict. How can I fix that? I thought it shouldn't happen after rooting. (I'm trying to install the "international" velvet.apk).
wictor1992 said:
Heh, fair enough. I think I'm learning a bit about adb
One question: I can't replace system APKs by installing them, it tells me that there is a signature conflict. How can I fix that? I thought it shouldn't happen after rooting. (I'm trying to install the "international" velvet.apk).
Click to expand...
Click to collapse
Let's try to keep this thread on-topic please.
But to answer your question, don't install the apk. Using a file explorer that has root access, copy it to /system/app (after making sure that system is r/w) and make sure the permissions are set to match the other apks in that directory.
when running adb after running the command where i tell it to restore fake restore and then while the "exploit" is running ikeep getting , in cmd, link failed, no such file or directory, and it just keep doing that. is this normal or did i do something wrong.
efrant said:
Let's try to keep this thread on-topic please.
But to answer your question, don't install the apk. Using a file explorer that has root access, copy it to /system/app (after making sure that system is r/w) and make sure the permissions are set to match the other apks in that directory.
Click to expand...
Click to collapse