Hi all,
My XDA IIs works well before. But few days ago the Power button doesnt work properly, it can turn on the phone, hold to turn off the back light, but I can't use it to turn my phone screen off like before. Anyone has same problem ?
Can you see any part of the screen? It might just be that the backlight adjustments are set too low when the unit isn't cradled. You might be able to see the screen in daylight.. or maybe it was inside your home. I forgot where I was at when it happened to me. In anycase, if you can see a bit of images on your screen, go into the Backlight properties and change the setting to your liking.
Good luck..
The problem is i can just press the power button to turn off my phone BEFORE (the screen is completly off), and NOW it doesnt work at all ! When my phone was off, I can press the Power button to turn it on, or when I hold it for few seconds the back light will be turned off, but press once to turn off. I dont know why, if somthing wrong with the Power button it should be doesnt work at all, that's mean i cannot turn on my phone as well. But other functions of the Power button are still work well, except the 'Turn off' :roll:
power off doesn't work anymore
I have the same problem here. I can't use the power button to power off my qtek 9090!!
i can use the power button to turn my pda on and to switch the background light on and off - so the "hardware side" of the power button is working.
however, i can't use the power button to turn off the device. it's very annoying, because i can't put it in my pocket after finishing a call :-(
this should be some sort of a software problem - so i hard resetted my device (a couple of times) - but that didn't help!
can anyone help?
thanks,
lorenz
the ba doesn't turn off it is always on staand by mode. ->settings -> system -> button lock
this will stop any missed call because when the ba is in standby the power button is the only one to work
power on is no problem. i can't put my BA into standby mode. if i press the power button while the BA is turned on, nothing will happen. the screen will stay on, the background light stays on.
i have no way to put it into stand-by with the power button!
try this and see if it works. it's a software app that wil rest, shut down, and turn the screen off. just copy it to your BA temp directory and install it.
power button problem
nemchua
Is your problem solved ?
Because I have the same problem.
Power of switch doesn't work !!!
Any help would be welcome.
power button problem
Does anyone solve the problem???
Had the same problem...
I had the same problem going on for about two weeks or so...never changed anything and it went away all by itself.
The problem has not come back now in over 4 months.
Sure would love to know what the problem was tho...
Greetings,
Noddy
Power Off does not work
Add my name to people with this problem.
The only event I can link it to is this: I deleted my Motorola Bluetooth headset and installed a Logitech headset. I noticed the problem (can't turn OFF with POWER BUTTON) soon after that.
same problem for me ..... someone must know !!!!
I think it is a hardware problem. The contact is not making cleanly. Disassemble and spray time, perhaps.
It's a standard push switch, easy enough to replace, I occasionally list themon ebay but any phone repairier should have them in stock.
Richard
i had same problem yesterday afternoon, but it is ok now. recovered by himself
Write again in two weeks and let us know if it is still healthy. In my case, anintermittent problem became continuous.
Can't turn the screen on after pressing power button
I have a problem with my Bell Atrix. After pressing power button to lock the screen, i can't wake up the screen up by pressing that button again. Could anyone tell me how to fix it pls.
When I press the back button in the Contacts app another screen opens (this one identical to the first, except missing the "Contacts", "Groups", and "Activities" tabs), rather than exiting to the home screen as should be expected. Pressing the back button on this screen does nothing - the only way to exit the app is with the home button.
I have noticed that this does not happen with some ROMs - pressing the back button on the first screen simply exits the app without opening the second screen. Why does this happen, and is there a way to make the app always exit when pressing 'back'? I tried using the Contacts.apk from a ROM in which it works correctly in a ROM in which it does not, but nothing changes.
l1g3rz said:
When I press the back button in the Contacts app another screen opens (this one identical to the first, except missing the "Contacts", "Groups", and "Activities" tabs), rather than exiting to the home screen as should be expected. Pressing the back button on this screen does nothing - the only way to exit the app is with the home button.
I have noticed that this does not happen with some ROMs - pressing the back button on the first screen simply exits the app without opening the second screen. Why does this happen, and is there a way to make the app always exit when pressing 'back'? I tried using the Contacts.apk from a ROM in which it works correctly in a ROM in which it does not, but nothing changes.
Click to expand...
Click to collapse
Press and hold the Contacts icon until the Edit Dock Shortcut window appears. Select Change Shortcut and find Contacts under Applications. Select the icon you want. You must reboot the phone for this fix to work. After the reboot, Contacts will work normally with the ability to "Back Out" to the desktop.
Thanks, that worked perfectly.
I have disabled my HOME button following the tip in this thread:
http://forum.xda-developers.com/showthread.php?p=18473677#post18473677
Now the HOME button does nothing in most programs, but it acts as a SCROLL_TO_TOP button in my browser.
But it still keeps flashing - which is annoying when I'm reading in a darkened room.
I don't know why it flashes - maybe because there are unacknowledged notifications.
Is there any way to disable the flashing of the HOME button?
It flashes when you have an email notification. Just close that notification and it will stop flashing. But I really wish they provided an option to turn that off.
@jschall
If your A100 is rooted...
If you have something like RootExplorer...
Go to /system/lib/hw
Mount the dir as r/w
Now rename this file: lights.vangogh.so
to something like: lights.vangogh.so.bak
Reboot.
No more blinking notification light.
@donaldson:
Thank you for that tip. It worked, BUT...
while the home button no longer flashes, the screen is stuck at full brightness.
So, I renamed the file the way it was, I can live with the flashing HOME button.
Hi there,
I'm enjoying coolexe's ROM but I've discovered I can't turn my phone off.
Long press of the power button shows the menu with "Power off", "Hibernate", "Restart" etc. Selecting power off shows the first part of the shut down sequence (white htc screen, black screen, button lighting turns off).
Pressing the power button again (long press needed) does not boot the phone but shows pin entry screen first (ie, the phone did not shut down).
I first noticed this because over night my phone went to 0% battery while I thought it was turned off. The only way I've been able to shut it down properly is rebooting to recovery and powering down from there.
Its a minor problem but I'd be pleased to hear if someone can suggest a solution. The ROM is otherwise great!
Thanks
Jandles said:
Hi there,
I'm enjoying coolexe's ROM but I've discovered I can't turn my phone off.
Long press of the power button shows the menu with "Power off", "Hibernate", "Restart" etc. Selecting power off shows the first part of the shut down sequence (white htc screen, black screen, button lighting turns off).
Pressing the power button again (long press needed) does not boot the phone but shows pin entry screen first (ie, the phone did not shut down).
I first noticed this because over night my phone went to 0% battery while I thought it was turned off. The only way I've been able to shut it down properly is rebooting to recovery and powering down from there.
Its a minor problem but I'd be pleased to hear if someone can suggest a solution. The ROM is otherwise great!
Thanks
Click to expand...
Click to collapse
i don't use this rom, but i think sense 2.1 and above has fast boot feature
try: menu -> settings -> power, then make sure 'fast boot' is unticked
then when you power off the phone, it should properly be properly switched off instead of hibernating.
that worked - thanks!
(now I wish I'd figured that one out myself)
I recently had my Kindle melt down. I was adjusting the volume while listening to Pandora and I had an error that read "something/android/phone.apk has stopped"
After pressing OK the error window would appear again and then again. After rebooting it would appear at the lock screen. After pressing OK there is only about .5 seconds before it reappears - not even long enough for me to swipe to unlock the screen or hit the recovery button.
I had to restore a prior backup.
I heard that it was probably and app that was making a call to the phone.apk. Any ideas what apps might do this? It is apparently something that is starting at boot.
I really liked the SimpleCM9 ROM that I was using.
Thanks.