Related
I just downloaded the 2.2.1 Froyo 34.4.9 update.zip and am really anxious to give it a try. I'm kinda new at this, I have a rooted Defy (Superoneclick method) and I did root and flash a custom ROM on my CliqXT (adb push method) and have both working good. So, I'm not completely dumb to this stuff but I read in a couple of the thread posts that some people have had issues with 3G and WiFi after installing this update. I do believe that troubleshooting that stuff might be a bit over my head so I'm just wondering if this has been an on going issue or if its rare? If I follow the posted instructions correctly do I have a good chance at ending up with a trouble free version of Foyo? FYI...My Defy is Rooted (factory ROM) 2.1 update1 with Blur Version 3.6.36 and I have a Nandroid backup.
I wasnt sure where to post my previous question since I found the info in the Dev's forums, but I guess because I haven't posted at least 10 times I wasn't allowed to post my question in the Dev's thread I got the .zip from. Funny because I saw a post from someone that didnt even know what "root of the sd card" was but they're allowed to post in that thread. Not trying to offend anyone just making an observation. New to this site so I'm just learning the rules.
I dont think you should be so anxious I upgraded today and the only issue was that it was initially a bit slow but after a few minutes everything was zipping along perfectly.. My 3g is just fine and my Wifi as well. I was able to reroot using superoneclick (update undoes root), and overclock using milestone-overclock app.
I was getting near a near 1000 quadrant score at stock b4 overclocking and got in the 1400's after overclocking to 1200mhz @80.
If you follow the directions it should work no prob.. Welcome to froyo
Those problems you mentioned only apply to the leaked FroYo SBF files. And it only affects those that flash the SBFs to phones that are not specific to that SBF.
I flashed the leaked FroYo for T-Mo USA on my T-Mo USA Defy and had no problems.
You should be fine with the official update.
If you can, please make a nandroid after you update and post it here...
Thanks!
realityrat said:
I wasnt sure where to post my previous question since I found the info in the Dev's forums, but I guess because I haven't posted at least 10 times I wasn't allowed to post my question in the Dev's thread I got the .zip from. Funny because I saw a post from someone that didnt even know what "root of the sd card" was but they're allowed to post in that thread. Not trying to offend anyone just making an observation. New to this site so I'm just learning the rules.
Click to expand...
Click to collapse
Are common folk getting the update today?
hah2110 said:
Are common folk getting the update today?
Click to expand...
Click to collapse
On the Moto forum an Admin is asking for any issues discovered by those who have updated to 2.2. Not sure if this means they're still trying to sort it.
https://supportforums.motorola.com/message/335597#335597
"Common Folks?" Wow, I hope that wasnt supposed to be some kind of insult. You should remember something, its us "common folks" that have the clean Nandroid backups the Dev's seem to be needing, its us "Common Folks" that flash the custom ROMS and donate to the Dev's in appreciation for their hard work. But if us "common folk" aren't welcome here then I can leave because the last time I checked I was able to root and install custom ROMS on both of my phones without your help. Not bad for "common folk"
Lol you took my comment way out of context. I'm not a dev. I don't even have a defy. I'm about intermediate android when it comes to roms, flashing, etc.
I simply meant that, until now, you needed to root, install custom os, etc to get froyo.
realityrat said:
"Common Folks?" Wow, I hope that wasnt supposed to be some kind of insult. You should remember something, its us "common folks" that have the clean Nandroid backups the Dev's seem to be needing, its us "Common Folks" that flash the custom ROMS and donate to the Dev's in appreciation for their hard work. But if us "common folk" aren't welcome here then I can leave because the last time I checked I was able to root and install custom ROMS on both of my phones without your help. Not bad for "common folk"
Click to expand...
Click to collapse
Sent from my Nexus S using Tapatalk
Ok, sorry about that. The official OTA 2.2 release was done for a limited time a month or so ago (supportforums.motorola.com/thread/44255?start=0&tstart=0). I have a rooted Defy with custom recovery and download the update.zip from the Dev's forum. Sorry if I wasnt clear about that.
Hi! So what about that nandroid?
realityrat said:
Ok, sorry about that. The official OTA 2.2 release was done for a limited time a month or so ago (supportforums.motorola.com/thread/44255?start=0&tstart=0). I have a rooted Defy with custom recovery and download the update.zip from the Dev's forum. Sorry if I wasnt clear about that.
Click to expand...
Click to collapse
I havent installed the OS yet. I got a little more research to do but once I do it I'll be happy to provide the Nandroid. I have a couple questions about the current status of my SD card that I wanna look into first. Hopefully i'll be running Froyo in the next day or so and will provide the Nandroid ASAP.
I would like to know if I have Clockwork Recovery installed, can I still flash the official rom using the Update.zip file on SD card? Thanks.
Just want to be clear on the Nandroid backup. Are you asking me to make the backup right after flashing new OS before anything else gets installed? Basically a stock Defy running Froyo? If you give me details on what you're wanting it'll help alot with my learning process and it'll help make sure that you get what you're looking for. And does a Nandroid backup contain all info thats on SD card?
Yes, a Nandroid right after you update so that none of your data is on there and everything is stock.
Nope, the contents of the SD Card are not included when you make a Nandroid...
Thank you, your help is appreciated!
realityrat said:
Just want to be clear on the Nandroid backup. Are you asking me to make the backup right after flashing new OS before anything else gets installed? Basically a stock Defy running Froyo? If you give me details on what you're wanting it'll help alot with my learning process and it'll help make sure that you get what you're looking for. And does a Nandroid backup contain all info thats on SD card?
Click to expand...
Click to collapse
Beach_Head said:
Yes, a Nandroid right after you update so that none of your data is on there and everything is stock.
Nope, the contents of the SD Card are not included when you make a Nandroid...
Thank you, your help is appreciated!
Click to expand...
Click to collapse
Do you have any suggestions as to how to backup? I rooted the official (beta) tmous 2.2 with superoneclick (Z4 didn't work), and tried to install tenfars recovery module, however, it won't work with this rom. Is there another one that you suggest to use?
Try this one: kb7sqi's Recovery
Also, have you tried disabling USB Debugging before booting to recovery on Tenfar's Recovery?
You'll have to do that for it to work. The same goes for kb7sqi's Recovery.
Nasty bug or something...
darule_2011 said:
Do you have any suggestions as to how to backup? I rooted the official (beta) tmous 2.2 with superoneclick (Z4 didn't work), and tried to install tenfars recovery module, however, it won't work with this rom. Is there another one that you suggest to use?
Click to expand...
Click to collapse
this version doesn't work on this rom either...and the updated version was pulled.
Replied to your PM.
You can use Tenfar's and even kb7's old one. They both work.
You just need to disable USB Debugging before rebooting to recovery...
darule_2011 said:
this version doesn't work on this rom either...and the updated version was pulled.
Click to expand...
Click to collapse
Thanks Beach Head...got it running...will post soon.
Fantastic!
I'll be waiting...
darule_2011 said:
Thanks Beach Head...got it running...will post soon.
Click to expand...
Click to collapse
Anyway to root Bell Samsung Galaxy S2 LTE???
I cannot find anything on google or in this forums.
Thanks!!!
yea me either ive been searching for a couple weeks now.... it sucks
Rooting i757M
Am also still looking how to root this thing. The Skyrocket HD is merely the same phone, branded on AT&T carrier and this article made it clear that the phone has been silently put to the side, in favor of the coming S3. (phonesreview.co.uk/2012/05/10/samsung-galaxy-s3-buries-att-sii-skyrocket-hd).
That is, even on samsung online personal profile page, you can even find the SGH-i757M in the list of phone version, to add in your owner's page.
If anyone of you manage to root the phone, thanks to let me know.
Correction: The SGH-i757M can be found in the BAR model section on Samsung profile page and not under Smartphone. Hmm... weird categorization. Are those bar phones not smartphones? Oh, they are mini tablets.
Here is one.
Do you have any procedure to use that files? I just don't want to brick my phone
There's no any special procedure other than flash it with Odin
There're many tutorials about it here and there like that for example.
rxulan said:
Here is one.
Click to expand...
Click to collapse
Has this been tested and confirmed to work? I don't have the device yet but this may make my decision to buy one.
dsixda, well, all I can say is that I flashed it personally (into E120L though) and it worked (including root).
rxulan said:
dsixda, well, all I can say is that I flashed it personally (into E120L though) and it worked (including root).
Click to expand...
Click to collapse
Hey that is great news. I wonder if the CWM for the E120L is compatible then?
I wonder if this works to root the device, as I've read it worked for the Asian versions of the GS2 HD:
http://forum.xda-developers.com/showthread.php?t=1321582
dsixda, I guess it won't be too hard for you to check that as you're recognized developer
You can download the stock I757M firmware with the CheckFus using advanced tab (or using cli only version) with the following data:
Model: SGH-I757M
Product code: SGH-I757ZKMBMC
HIDSWVER: I757MUGLCA/I757MOYCLCA/I757MUGLCA/I757MUGLCA
Yes, I'll try all that as soon as I get my device Always nice to have the stock Odin firmware so that I don't need to dump everything beforehand in case something goes wrong.
Thank you again
Just FYI, the stock firmware is now available at sammobile.com. Grab an account and search for SGH-I757M. The download is much faster than using CheckFus.
Dsixda! So happy your getting this Device, I also want to say thank-you for your Kitchen you created!! Amasing work. Used it all the time with my Evo 3d.
Just got the Samsung Galaxy s2 hd lte with the Bell network, Do you have any plans to incorporate this into your Kitchen??
Also is there any easy Root anyone knows of yet that doesn't involve Odin? Like superoneclick...etc
markdexter said:
Dsixda! So happy your getting this Device, I also want to say thank-you for your Kitchen you created!! Amasing work. Used it all the time with my Evo 3d.
Just got the Samsung Galaxy s2 hd lte with the Bell network, Do you have any plans to incorporate this into your Kitchen??
Also is there any easy Root anyone knows of yet that doesn't involve Odin? Like superoneclick...etc
Click to expand...
Click to collapse
Try the Zergrush method which I linked in the previous page.
I haven't decided 100% whether to get it, as I still love my original S2. But if I get it I will incorporate it into the kitchen, once we figure out the custom recovery method.
I'm assuming any of the Tengrak GS2 HD recovery images (Odin .tar) will work, as long as you don't flash the associated Tegrak kernel for the ES120L/S/K?
You can always flash the stock firmware above in case you mess up.
Tried the Zergrush method, I had no luck. Oh well no big deal for now
markdexter said:
Tried the Zergrush method, I had no luck. Oh well no big deal for now
Click to expand...
Click to collapse
Or flash the first link provided by rxulan in page 1. It's the stock ROM but the system.img has superuser injected in it.
And/or Google for the Tegrak custom recovery in Xda. Just flash one of those recovery.tar meant for the HD, but not the kernel.
ODIN ?
rxulan said:
There's no any special procedure other than flash it with Odin
There're many tutorials about it here and there like that for example.
Click to expand...
Click to collapse
ODIN does not recognise .img or .ext4 files. I understand those are recovery files that CWD can restore but your device should already have been rooted. This is exactly the purpose of this thread, rooting the device first of all. This have been difficult for us to find the right .md5 files to use in ODIN. The device we're trying to root, SGH-i757M.
@ezechias
Odin doesn't recognize the files inside the rooted tar archive (the one linked on page 1), but you can flash them as a tar.md5, which you already know is a preferred format. There are guides online on how to convert it to tar.md5, you can Google it or I can post it later.
First, try to flash the TAR file as is; if it doesn't work then convert to tar.md5, then flash it.
Anyways, it's strange that nobody wants to be the lab rat to test the rooted TAR or the custom recovery that we have already discussed. We have the emergency stock ROM to fall back on if anything goes wrong. Looks like I'll have to purchase this device soon and try it out myself I already have all the files and stock firmware downloaded and ready to go
ICS for E120 K/L/S has been released.
I'm sure the same will happen with I757M pretty soon
****Seems like we're getting alot of new users thanks to the price cut on our phones, and while we have an amazing amount of information available it seems that it's overwhelming for new users and they end up posting questions that are answered already in stickies, etc, just because they don't know where to start, hopefully this guide will cut down on that.... please feel free to suggest things that should be added or any changes I should make to make this better and more complete, or if you think this is redundant and a waste of time feel free to flame me, you won't hurt my feelings, just trying to give back to the community, make things easier for new users, and cut down on "how do i..." posts that have been answered elsewhere...thanks!****
Welcome To the Epic 4g Touch
As a new user its probably overwhelming trying to figure out where to start since this is a relativity mature device, most of the existing users are well versed in the more basic tasks, and we have SO MUCH info all over the boards here, this guide should help you get started....
1. The 1st thing you'll probably want to do is root. If you're coming from an HTC device or are new to android you're probably not familiar with Odin. Odin is Samsung's in house recovery tool that leaked a few years ago. It lets you flash rom's via usb connected to a PC. Odin is PC only, if you use linux or mac the easiest way to get root would be to use a PC, however there is a cross platform tool, Heimdall, that allows you to flash on OSX/Linux... Going forward in this guide though I will only be referring to using 1-click Odin's on PC's as i feel this is what the vast majority of people will be using...
- You'll want to first go to Sfhub's stickied thread in the dev section, Sfhub has been kind enough to make rooted 1 click Odin images for us, so especially if you're coming from a HTC device you'll be amazed how easy these phones are to root...(found here http://forum.xda-developers.com/showthread.php?t=1342728)
- As of today (07/09/12) if you buy an E4GT it'll come with the EL29 gingerbread system, this ( http://forum.xda-developers.com/showthread.php?t=1433101 ) is the appropriate Odin 1 Click for you to get root, again, thanks Sfhub
7/12/12 edit: Sprint is pushing the OTA to ICS as of today. It is build FF18, the rooted odin one click can be found in yet another thread by Sfhub here ( http://forum.xda-developers.com/showthread.php?t=1721229)... as the emmc bug seems not to have been addressed in the kernel I will leave the rest of the post unaltered for now until most roms have been updated to a kernel built from source with the code that triggers the bug removed. Until then, as stated later, some ICS recoveries are considered safe (Agats), but it never hurts to take a few extra minuets when flashing to totally avoid the risk of bricking
7/26/12 EDIT:
ICS flashing is now safe AS LONG AS YOU ARE ON ONE OF AGAT63 OR chris41g's SAFE KERNELS, these are built from source and have the offending mmc_cap_erase code removed/disabled. The kernel repo is found here (http://forum.xda-developers.com/showthread.php?t=1662295) you can mobileODIN the tar's or flash the zip's via cwm
- You can refer to Garwynn's Official ICS OTA update thread for more information on the update (http://forum.xda-developers.com/showthread.php?t=1765953)
-After running the 1 Click Odin for your device you'll want to go back to the main thread ( http://forum.xda-developers.com/showthread.php?t=1342728 ) and download the auto root tool and choose option C to install Clockworkmod recovery- a custom recovery that will allow you to flash roms and make nandroid backups- on your phone. Dev VeNuM has posted a very detailed guide explaining what clockworkmod is and how to use it, which is stickied and can be found here ( http://forum.xda-developers.com/showthread.php?t=1587607 )
- I'm not providing detailed instructions as those are included in the linked to threads... should you find the directions difficult to follow user qbking77 has made really great informative videos, linked to in the directions, detailing the aforementioned processes that should help clarify things further for you.
2. You now have a rooted gingerbread system with custom recovery. You can safely flash any Gingerbread roms from recovery, following the directions posted with the rom of your choice. If you want to flash ICS roms however, you have some more reading to do, as this phone can be bricked if you do not follow directions....
- The Epic 4g Touch has a bug in it's emmc controller that can cause the /data partition to become inaccessible/unrecoverable sometimes thanks to the wipe process when flashing from ICS recoveries... DO NOT FLASH FROM ICS RECOVERIES!!!! (7/26/12 edit: OLD, you can now flash from ICS as long as you are on a safe kernel, safe kernels can be found in the repo linked to earlier this post)
7/11/12 edit: In the FF18 source Garwynn has confirmed the presence of the offending code that triggers the emmc bug (http://forum.xda-developers.com/showpost.php?p=28609341&postcount=32) meaning that it will eventually be safe to flash from ICS as long as the offending code is removed by the dev of the kernel/rom...
- Please see this (http://forum.xda-developers.com/showthread.php?t=1525495) thread by xST4T1K which details how NOT to brick your device... It is slightly out of date but still very relevant... if you want a more technical understanding of what this emmc bug is and why this is happening you can see Sfhub's thread in general related to it (http://forum.xda-developers.com/showthread.php?t=1644364 ). The OP contains all of the information that our users have been able to figure out about this bug... Be sure to thank these people, as their hard work has made it exponentially safer for all of us to flash ICS roms on our phones...
-Every ICS rom will have a flashing guide in it's dev thread, its HIGHLY suggested you read and reread the guide for the rom you want to flash and follow it EXACTLY, taking the extra time upfront to fully understand what you're about to do will save you alot of trouble going forward.
-Put simply though you will always want to ODIN or Mobile ODIN (mobile Odin is an app made by the dev chainfire, available in the play store, that allows you to preform Odin flashes from your phone without using a PC) the el26 Gingerbread kernel/recovery and flash any ICS roms from that. NEVER FLASH FROM AN ICS RECOVERY, THAT IS HOW BRICKS ARE MADE!!!! Also do NOT use Rom Manager or Touch recovery!!!! (7/26/12 edit: also now outdated, as long as you are on a safe kernel you can just flash via cwm in ICS, no need to ODIN back to EL26)
3. Additional Information...
-modems, there are a variety of modems available for the E4GT, and all can be found in the modem repo ( http://forum.xda-developers.com/showthread.php?t=1764210 ). Every phone responds differently to different modems and you may want to try some new ones if you are dissatisfied with the current one you have.
- Jelly Bean... Please do not post asking "Is Jelly Bean available for this phone!1!!!!!" / "when i get jellybean!!!1!!11!!"... we have some awesome dev's for this and there are quite a few working on it currently. It is currently booting with some issues, but should be ready to use as a daily in the coming weeks. DO NOT post asking where to find current builds, dev's will post in the development section once they feel its ready for release, same goes for CM10
- qbking77 has posted videos of reviews and install guides for most of the roms around here. If you find the install directions confusing watch the appropriate video and see if that helps you at all, he does a very good job of walking you through it... Also his reviews are quite helpful as well if you're not sure if you want to flash or not... Please consult these as opposed to starting a thread asking "should i flash XXXX?? is it good?" these things are a matter of personal preference... Also pretty much everything around here these days is good enough to use as a daily driver, all roms will have a working/not working section... refer to that, if everything you use is marked as working and the rom is not labeled "alpha build HIGHLY unstable, etc..." chances are it'll work for you well day to day and does not warrant starting a thread asking if its good enough to use as a daily driver...
- Stock roms/stock leaks are labeled as EL29, FF18, etc... all this represents is the date Samsung compiled the rom... the 1st letter represents the year (E=2011 F=2012) and the second represents the month (January=A all the way through December=L) and the number is the date. Modems follow the same naming scheme. The modems available are not limited to the "matching" rom in any way, ANY modem can be used with ANY rom (thanks to kingdazy for clarification on how the Samsung naming scheme works!)
7/26/12 EDIT:
It's been brought to my attention that we have a lot of people posting asking how to return to stock GB for whatever reason... all that you need to do is ODIN EL29, sfhub's one-click can be found here, its all you need ( http://forum.xda-developers.com/showthread.php?t=1433101 )
Also if you took the OTA and want root you can just ODIN the FF18 rooted one-click, found here ( http://forum.xda-developers.com/showthread.php?t=1721229 )
IF you need to get rid of the yellow triangle on the bootscreen in order to return your phone to sprint/it annoys you or whatever you need to download chainfire's app "triangle away" from the play store, its requires ICS and its like $1.99, buy it even if you don't need it, dude deserves the money for his awesome work on android devices... If you're still on GB you'll need a usb jig
~I will be adding more info to this over the next few days, but I figured this was enough to get started on, again any suggestions or additions are welcome and encouraged! the easier we make it for new users to get started the fewer times we'll all have to answer the same questions over and over again... If i referred to your work without crediting it I assure you it was accidental and if you notify me of my mistake I will make sure to edit the post accordingly to credit you, again thanks for any input!~
will be editing this to bring it current and for style this weekend, overdue for an update
This is very nice.. I wish I read something like this when I first got my phone months back, I had to take pieces of information from "here and there" and put it all together.. It can be overwhelming but it's not impossible to the new users
MiguelHogue said:
This is very nice.. I wish I read something like this when I first got my phone months back, I had to take pieces of information from "here and there" and put it all together.. It can be overwhelming but it's not impossible to the new users
Click to expand...
Click to collapse
thanks for your input! i'd actually thank you but have used up my 8 already today! I thought this would be useful as I've been seeing a lot of the same questions all over the place recently which are already answered in various threads, and there are some really good highly detailed guides out there as well, but we're kind of lacking in something that brings them all together in a noob friendly manner, like if you've never had a Samsung phone before its not immediately obvious that you need to start with sfhub's Odin thread since you're all like WTF is a ODIN?!? same with is it safe to flash xxxx from xxxx... those of us that have been around know the drill by now, and i guess it is kind of elaborate vs flashing on most phones, but its bothersome to have to reply to the same question over and over again, so hopefully this helps make it easier... like i said i will continue to add to this and welcome suggestions, again thanks for your input!
Thank you for this excellent guide. I'm a dev coming from the 3D and was about as lost as one can be, and this was a massive help to me. I appreciate it. :good:
No problem man, that's why I took the time to write it, have fun with the phone, its awesome... jet life till the next life
Sent from my SPH-D710 using xda app-developers app
great post, OP!
perhaps you might consider a concise explanation of build designations/dates (fdxx ffxx, ect) vs modem, and how they are related but not exclusive?
i struggled with that my first few days...
kingdazy said:
great post, OP!
perhaps you might consider a concise explanation of build designations/dates (fdxx ffxx, ect) vs modem, and how they are related but not exclusive?
i struggled with that my first few days...
Click to expand...
Click to collapse
I will edit to add that in later today, thanks for the suggestion!
cp320703 said:
No problem man, that's why I took the time to write it, have fun with the phone, its awesome... jet life till the next life
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
You already know man.
Outstanding write up cp320703 !
Thanks to everyone on this site, all guides were done so well I didn't have any questions and I rooted my phone and installed a custom rom and modem very easily. Thanks to all who made this possible. I was tired of waiting for ICS from sprint, so thank you all very much.
Rafter_Man said:
Thanks to everyone on this site, all guides were done so well I didn't have any questions and I rooted my phone and installed a custom rom and modem very easily. Thanks to all who made this possible. I was tired of waiting for ICS from sprint, so thank you all very much.
Click to expand...
Click to collapse
Thanks op.
Thanks for this guide, it has been really helpful. I have had htc phones before, but this is my first Samsung. Just a little bit different.
Great guide, I'm coming over from my evo 4g and was a little worried about rooting my touch. This guide takes away the doubt I had.
Sent from my PC36100 using xda premium
thanks
BigSmoke53 said:
Great guide, I'm coming over from my evo 4g and was a little worried about rooting my touch. This guide takes away the doubt I had.
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
thanks for your guide and information; already I do some of the tested Roms and every I test i love it
---------- Post added at 12:47 AM ---------- Previous post was at 12:42 AM ----------
thanks for your guide and information; already I do some of the tested Roms and every I test i love it
Thanks my friend sextape recommended me this place as soon as I got the Epic ..
labelexpired said:
Thanks my friend sextape recommended me this place as soon as I got the Epic ..
Click to expand...
Click to collapse
Ah I See You Finally Came Thru Here Glad To See Ya, People On This Forum Are Great Dude!
Okay, first off thanks for the guide. However for some of us senior posters coming from HTC phones there still could be a clearer clarifications.
You say dont flash from ICS recoveries. That is confusing some of us that are not rookies. I understand much different then HTC phones Samsung has the recovery in the kernal. So are you saying not to flash from the built in phone recovery to another ICS build?
From what I gather and please correct me if I am wrong. If you have a custom agat kernal from 2.1 up you can flash betweeen FF!8 official rom or from custom rom to rom as long as you use ODIN to do it? Or is is ODIN MOBILE only do do it as long as you dont attempt thru stock recovery?
How about if your on stock FF18 kernal. Can you still use ODIN safely to go from ICS rom to rom? Should you always use either SFHUBS or Caulikins format program first?
Sorry to sound stupid but the verbage is new to some of us from other phones.
Thanks a bunch!
iceshark said:
Okay, first off thanks for the guide. However for some of us senior posters coming from HTC phones there still could be a clearer clarifications.
You say dont flash from ICS recoveries. That is confusing some of us that are not rookies. I understand much different then HTC phones Samsung has the recovery in the kernal. So are you saying not to flash from the built in phone recovery to another ICS build?
From what I gather and please correct me if I am wrong. If you have a custom agat kernal from 2.1 up you can flash betweeen FF!8 official rom or from custom rom to rom as long as you use ODIN to do it? Or is is ODIN MOBILE only do do it as long as you dont attempt thru stock recovery?
How about if your on stock FF18 kernal. Can you still use ODIN safely to go from ICS rom to rom? Should you always use either SFHUBS or Caulikins format program first?
Sorry to sound stupid but the verbage is new to some of us from other phones.
Thanks a bunch!
Click to expand...
Click to collapse
sorry just saw this post, ODIN is always safe, and now that the emmc bug is understood most all of the kernels in the repo are safe as well, a bit of code just needed removed from stock to make them so. Odin and cwm are two means to the same end for the most part, however outside of official leaks you won't really be flashing roms via ODIN. Basically if you are on stock ff18 rooted you would want to ODIN a safe kernel, then you would be good to flash roms via cwm going forward
Sent from my SPH-D710 using xda app-developers app
cp320703 said:
sorry just saw this post, ODIN is always safe, and now that the emmc bug is understood most all of the kernels in the repo are safe as well, a bit of code just needed removed from stock to make them so. Odin and cwm are two means to the same end for the most part, however outside of official leaks you won't really be flashing roms via ODIN. Basically if you are on stock ff18 rooted you would want to ODIN a safe kernel, then you would be good to flash roms via cwm going forward
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
That perfect! Thanks for clarification on this. I am sure others wondered the same.. Now if there was just a nice Vanilla stock type tweaked non theamed ICS rom I would jump in. I will however ODIN Agats 2.3 to be ready! You rock!
Hey guys, I am new to this forum here but before anyone flames me, I did read the faqs and tried to uninstall from there but it did not work out. Apparently I dont think you can get rid of CM11 since you cant install any stock firmware older than it? Before I installed CM11, I was on jellybean. I had tried to find the latest kitkat update for the s3 (att) and there is no file of it found online (tried sammobile). When I tried flashing an older firmware with ODIN, it just fails at "NAND!". Any help would be appreciated. I am COMPELETELY new at this so specific directions would be appreciated!
I really do love cyanogenmod but there are simply too many glitches and not enough guidance on how to fix em. I am, however, currently using it on my HP touchpad, if anyone remembers what it is . Maybe ill go back to using it in the future.
thanks!
Your rom (cm) has nothing to do with what firmware you can or cannot flash. Once you have updated to 4.3 firmware or newer, you can only flash the same or newer firmware in odin from now on. (Regardless of firmware you can still flash older roms btw)
Using terminal emulator, enter this to find your current firmware build:
getprop ro.bootloader
I suspect you are on a 4.3 build. So odin flash that same firmware. You can find it in these forums. After that you can get the ota to update fully to kk.
There are other methods of updating. Just check the General section. (enewman17 has a few threads that will help)
Note: anytime you go between touchwiz and non touchwiz roms, you will have to factory reset or it'll hang at boot.
DocHoliday77 said:
Your rom (cm) has nothing to do with what firmware you can or cannot flash. Once you have updated to 4.3 firmware or newer, you can only flash the same or newer firmware in odin from now on. (Regardless of firmware you can still flash older roms btw)
Using terminal emulator, enter this to find your current firmware build:
getprop ro.bootloader
I suspect you are on a 4.3 build. So odin flash that same firmware. You can find it in these forums. After that you can get the ota to update fully to kk.
There are other methods of updating. Just check the General section. (enewman17 has a few threads that will help)
Note: anytime you go between touchwiz and non touchwiz roms, you will have to factory reset or it'll hang at boot.
Click to expand...
Click to collapse
..
I am on "I747UCUEMJB"
and i am not sure what build i am on but according to my "build number"this is what it says: "cm_d2att-userbug 4.4.2 KOT49H"
The main issue is, I cannot find 4.3 update anywhere on the internet
The MJB is your current firmware/bootloader build/version.
The build number displayed in settings only represents the rom, which is often different, and doesnt really matter to much.
From this post/thread
http://forum.xda-developers.com/showthread.php?p=52341560
Direct link to MJB firmware
http://www.androidfilehost.com/?fid=23329332407590581
DocHoliday77 said:
The MJB is your current firmware/bootloader build/version.
The build number displayed in settings only represents the rom, which is often different, and doesnt really matter to much.
From this post/thread
http://forum.xda-developers.com/showthread.php?p=52341560
Direct link to MJB firmware
http://www.androidfilehost.com/?fid=23329332407590581
Click to expand...
Click to collapse
i have no idea what MJB means (i google'd it) and i just found out what my bootloader version is via download mode (its at the very bottom) and i have version 2.0?
ok downloading the giant file now. will report details. just follow instructions in the first link?
[sorry, like i said, im a noob so i really apologize for the lack of terms here]
MJB is just short for I747UCUEMJB. Sorry if I confused you. And the S/W revision being 2.0 is what Odin uses to know what firmware it is allowed to flash. In this case 2.0 tells odin it can flash the MJB firmware, or anything newer.
And yes, follow the instructions he posted and you should be fine.
Oh, and if you did not run the getprop command I posted before, please do so before flashing....just to be on the safe side. If it returns I747UCUEMJB, you are good to go. If it returns anything else, let me know before flashing.
DocHoliday77 said:
MJB is just short for I747UCUEMJB. Sorry if I confused you. And the S/W revision being 2.0 is what Odin uses to know what firmware it is allowed to flash. In this case 2.0 tells odin it can flash the MJB firmware, or anything newer.
And yes, follow the instructions he posted and you should be fine.
Oh, and if you did not run the getprop command I posted before, please do so before flashing....just to be on the safe side. If it returns I747UCUEMJB, you are good to go. If it returns anything else, let me know before flashing.
Click to expand...
Click to collapse
Cool! Got it. I think that was my main problem. I could only find 4.0 (or 4.1) and have been trying to use that on ODIN. Perhaps that was the main issue....
Oh already ran it and got "I747UCUEMJB", sorry if didnt say it properly.
Really appreciate the help! Ive at this for days and no solutions. Sometimes the hacking/custom firmware isnt for everybody
Ill update what happens. Download is taking forever.
EDIT: BTW, for the first link, which poster am I gonna have to follow? im assuming "garbage guy"?
I though you did run the command already, but just wanted to be certain is all. For some reason AT&T stopped releasing their firmware, which has been causing all kinds of problems for people.
Anyway, it sounds like you are good to go! Good luck!
Oh, and if the firmware you're downloading is a .zip or .7z file, make sure you extract it first. Odin only flashes .tar and .tar.md5 files.
DocHoliday77 said:
I though you did run the command already, but just wanted to be certain is all. For some reason AT&T stopped releasing their firmware, which has been causing all kinds of problems for people.
Anyway, it sounds like you are good to go! Good luck!
Oh, and if the firmware you're downloading is a .zip or .7z file, make sure you extract it first. Odin only flashes .tar and .tar.md5 files.
Click to expand...
Click to collapse
Thank you so much! It finally worked! I got the reset notification and I am now back on JB
Thank you! should I take any more steps to ensure I made a clean installation or am I good after flashing it?
david12795 said:
Thank you so much! It finally worked! I got the reset notification and I am now back on JB
Thank you! should I take any more steps to ensure I made a clean installation or am I good after flashing it?
Click to expand...
Click to collapse
Weird, I went straight to update phone and it said my phone is up to date? I thought the official 4.4 update came out for the S3?
david12795 said:
Thank you so much! It finally worked! I got the reset notification and I am now back on JB
Thank you! should I take any more steps to ensure I made a clean installation or am I good after flashing it?
Click to expand...
Click to collapse
Awesome!
really glad to hear that! The only thing I can think of thst you might want to do next is backing up your nv data. The following is a copy/past from a post I made a few min ago... root is required to fo this btw, just so you know.
(Since you are looking to update though, I recommend waiting till you have updated before rooting and running this backup)
It's a super simple procedure and will create an on device backup of your nv data. The backup will be stored on a couple of partitions we never touch, not even with firmware flashes. This essentially makes it a permanent backup. The cool thing about it is every time you reboot, the system checks for any corruption, and if detected, it will automatically restore from this backup. So if it were to ever happen, you probably wouldn't ever even notice it!
Install the Terminal Emulator from the play store. Open and enter this:
su
reboot nvbackup
Thats it! Device will reboot and create your backup. This should prevent you from ever suffering from a lost IMEI!
david12795 said:
Weird, I went straight to update phone and it said my phone is up to date? I thought the official 4.4 update came out for the S3?
Click to expand...
Click to collapse
That has been released, but OTA's are generally rolled out in stages over several weeks. Usually done by region. So it msy not have started in your area just yet.
Two alternatives you can try though, install kies on your computer and update through that. Or there are a couple if threads in the General section that provide the ota for download.
Enewman17 has a few threads helping folks to update so I recommend checking them out as well.
Ive heard that some people have gone to best buy and they were able to initiate the update there. I dont know much more about this though.
DocHoliday77 said:
Awesome!
really glad to hear that! The only thing I can think of thst you might want to do next is backing up your nv data. The following is a copy/past from a post I made a few min ago... root is required to fo this btw, just so you know.
(Since you are looking to update though, I recommend waiting till you have updated before rooting and running this backup)
It's a super simple procedure and will create an on device backup of your nv data. The backup will be stored on a couple of partitions we never touch, not even with firmware flashes. This essentially makes it a permanent backup. The cool thing about it is every time you reboot, the system checks for any corruption, and if detected, it will automatically restore from this backup. So if it were to ever happen, you probably wouldn't ever even notice it!
Install the Terminal Emulator from the play store. Open and enter this:
su
reboot nvbackup
Thats it! Device will reboot and create your backup. This should prevent you from ever suffering from a lost IMEI!
Click to expand...
Click to collapse
Thank you! I will look into this. I just figured for some reason...I would have some data left from cyanogenmod, if that makes sense. In other words, i want my phone to be as fresh as possible. I only ask this because when I had CM, i accidentally made a backup of it through rom manager (or clockwork) and I am not sure if its in my partition somewhere.
That has been released, but OTA's are generally rolled out in stages over several weeks. Usually done by region. So it msy not have started in your area just yet.
Two alternatives you can try though, install kies on your computer and update through that. Or there are a couple if threads in the General section that provide the ota for download.
Enewman17 has a few threads helping folks to update so I recommend checking them out as well.
Ive heard that some people have gone to best buy and they were able to initiate the update there. I dont know much more about this though.
Click to expand...
Click to collapse
TIL that OTA arent as fast. Ill download KIES and give it a try.
Just installed KIES and it said my phone has the latest firmware?
david12795 said:
Thank you! I will look into this. I just figured for some reason...I would have some data left from cyanogenmod, if that makes sense. In other words, i want my phone to be as fresh as possible. I only ask this because when I had CM, i accidentally made a backup of it through rom manager (or clockwork) and I am not sure if its in my partition somewhere.
TIL that OTA arent as fast. Ill download KIES and give it a try.
Click to expand...
Click to collapse
Factory resetting with stock recovery installed wipes all data except the external sdcard. I am so sorry I should've mentioned this before. I was thinking you had already done one at some point and didn't have anything left to worry about. Still, I should have asked and I do apologize for that. Hopefully if it was really important it was saved to the external sdcard....
david12795 said:
Just installed KIES and it said my phone has the latest firmware?
Click to expand...
Click to collapse
Ok, I wasn't sure about that. I personally never need or use kies so I didn't know if it was tied to the staged rollouts. It would appear that it is though.
Give me a few min and ill post links to the threads where you can download the ota or update via a different method.
---------- Post added at 03:56 AM ---------- Previous post was at 03:40 AM ----------
UCUEMJB to UCUFNE4 firmware update - thread by enewman17
http://forum.xda-developers.com/showthread.php?t=2808654.
How to update SGH-I747 yo UCUFNE4_4.4.2 - thread by enewman17
http://forum.xda-developers.com/showthread.php?t=2789917
[Download] AT&T Kitkat OTA file - thread by bkong
http://forum.xda-developers.com/showthread.php?t=2788012
I suggest trying the third one by bkong first. He posted a pure OTA file you can try to update with.
The first option is a recovery flashable firmware, but does not include the /system (ROM) portion. To fully update using this you'll flash the firmware per his instructions and then go to his development thread for the stock rom. It is here: http://forum.xda-developers.com/showthread.php?t=2788357
The second option is the OTA file, but it has been slightly modified to skip certain file checks. If the original OTA doesnt work, theres a good chance this will. (Since you are full stock now either one should flash without issue).
Hope those help! I recommend doing a bit of reading about each one (at least the OP and last few pages) and start with whichever you are most comfortable with.
Or, you could always use that most valuable tool, patience, and wait for the OTA to roll out for your area.
Good luck!
DocHoliday77 said:
Factory resetting with stock recovery installed wipes all data except the external sdcard. I am so sorry I should've mentioned this before. I was thinking you had already done one at some point and didn't have anything left to worry about. Still, I should have asked and I do apologize for that. Hopefully if it was really important it was saved to the external sdcard....
Ok, I wasn't sure about that. I personally never need or use kies so I didn't know if it was tied to the staged rollouts. It would appear that it is though.
Give me a few min and ill post links to the threads where you can download the ota or update via a different method.
---------- Post added at 03:56 AM ---------- Previous post was at 03:40 AM ----------
UCUEMJB to UCUFNE4 firmware update - thread by enewman17
http://forum.xda-developers.com/showthread.php?t=2808654.
How to update SGH-I747 yo UCUFNE4_4.4.2 - thread by enewman17
http://forum.xda-developers.com/showthread.php?t=2789917
[Download] AT&T Kitkat OTA file - thread by bkong
http://forum.xda-developers.com/showthread.php?t=2788012
I suggest trying the third one by bkong first. He posted a pure OTA file you can try to update with.
The first option is a recovery flashable firmware, but does not include the /system (ROM) portion. To fully update using this you'll flash the firmware per his instructions and then go to his development thread for the stock rom. It is here: http://forum.xda-developers.com/showthread.php?t=2788357
The second option is the OTA file, but it has been slightly modified to skip certain file checks. If the original OTA doesnt work, theres a good chance this will. (Since you are full stock now either one should flash without issue).
Hope those help! I recommend doing a bit of reading about each one (at least the OP and last few pages) and start with whichever you are most comfortable with.
Or, you could always use that most valuable tool, patience, and wait for the OTA to roll out for your area.
Good luck!
Click to expand...
Click to collapse
No no! Its fine, I wasnt planning using it or anything, I just wanted to get rid of it since I have no use for it, no need to apologize. , I was fully aware that I would lose all files, other than SD ext drive. I just wanted to make sure that all files are in the right place and none of the unnecessary files are taking up space (e.g. files from cyanogenmod)
As for the update, I talked to a samsung representative and they said one can go to Best Buy and get it updated there through a technician, so Ill try that later since I am close to it ATM. If it back fires, Ill try your suggestions.
I really do appreciate for the help , I have been completely lost for days but it turns out I was just using the wrong firmware. Thanks for pointing it out. Good karma is coming your way . Hopefully one day, I will be here again and trying out a new custom firmware.
Glad I could help!
If I remember right, someone who mentioned the best buy thing had said at the time that the first store they went to did not have the update yet. But I think they found another in their area did. So if they say its up to date and cant help, you might find another store close by can. (If there is one of course!)
Just fyi so you're not too surprised if that happens.
DocHoliday77 said:
Glad I could help!
If I remember right, someone who mentioned the best buy thing had said at the time that the first store they went to did not have the update yet. But I think they found another in their area did. So if they say its up to date and cant help, you might find another store close by can. (If there is one of course!)
Just fyi so you're not too surprised if that happens.
Click to expand...
Click to collapse
Ill hope for the best and prepare for the worst.
Of course, if the worst happens, I can just use one of your links you mentioned. :good::good:
I rooted my old milestone many years ago but havee been keeping my devices stock ever since, until today that is. Today I decided I wanted to try to root my Samsung SGH-I747M with Telus and everything seemed to start off smoothly. Once installed the SuperSU stopped working. I tried fixs I had read online such as updating the app, but this did not work. I read on a forum that you could flash something to disable know to help fix the problem. When I tried going this avenue I was not able to reboot my phone. I tried restoring from a backup taken before flashing, but I havent done any of this in so long im not entirely sure the backup took properly. At one point I got a message saying no OS was installed but after restoring this seemed to go away. I apparently do not remember anything about rooting from my milestone and am hoping someone may be able to help me get out of this mess. I am currently downloading the stock firmware and I think I will try flashing it tomorrow. I also was hoping someone could point me in the direction of a thread on xda that went into a more detailed explanation of how rooting works, what specifically roms and flashing all is and does. Any help is greatly appreciated.
cdriver said:
I rooted my old milestone many years ago but havee been keeping my devices stock ever since, until today that is. Today I decided I wanted to try to root my Samsung SGH-I747M with Telus and everything seemed to start off smoothly. Once installed the SuperSU stopped working. I tried fixs I had read online such as updating the app, but this did not work. I read on a forum that you could flash something to disable know to help fix the problem. When I tried going this avenue I was not able to reboot my phone. I tried restoring from a backup taken before flashing, but I havent done any of this in so long im not entirely sure the backup took properly. At one point I got a message saying no OS was installed but after restoring this seemed to go away. I apparently do not remember anything about rooting from my milestone and am hoping someone may be able to help me get out of this mess. I am currently downloading the stock firmware and I think I will try flashing it tomorrow. I also was hoping someone could point me in the direction of a thread on xda that went into a more detailed explanation of how rooting works, what specifically roms and flashing all is and does. Any help is greatly appreciated.
Click to expand...
Click to collapse
General section is most likely the best place for that.
Here's a How-to that should get you started: http://forum.xda-developers.com/showthread.php?t=2538991
And here is the Sticky index: http://forum.xda-developers.com/showthread.php?t=1725839 Lots of good guides and info in there!
General section is most likely the best place for that.
Click to expand...
Click to collapse
The Only problem is I already attempted to follow this and my phone will no longer boot up. Also I tried navigating through the stickies. couldn't find much info for my device. I will be trying to flash the stock firmware tonight but I want to have a clear understanding on what flashing is and what the difference is between os firmware kernel and rom and such BEFORE flashing this firmware tonight. I hope someone will be able to help.
cdriver said:
The Only problem is I already attempted to follow this and my phone will no longer boot up. Also I tried navigating through the stickies. couldn't find much info for my device. I will be trying to flash the stock firmware tonight but I want to have a clear understanding on what flashing is and what the difference is between os firmware kernel and rom and such BEFORE flashing this firmware tonight. I hope someone will be able to help.
Click to expand...
Click to collapse
Well that info is already in the Sticky Index. Understanding what you're doing (or about to do) is really important but you gotta start reading, it's all there.
OS, firmware and ROM are the same thing.
When your phone boots, it basically goes: Bootloaders -> Kernel -> ROM (OS).
The kernel has pretty much all the "underground" controls (RAM, Mhz, governor, scheduler, BT, Wifi, etc).
I won't write everything but those are the basics.
Also, having a Canadian variant of the S3 (that's what the M is for), doesn't change much other than flashing bootloaders and stock ROM (which you'll wanna use the Canadian variant bootloaders and Telus ROM for stock). Everything else is basically the same.
Also, having a Canadian variant of the S3 (that's what the M is for), doesn't change much other than flashing bootloaders and stock ROM (which you'll wanna use the Canadian variant bootloaders and Telus ROM for stock). Everything else is basically the same.
Click to expand...
Click to collapse
Sweet I will definitely check that out. So I did flash twrp to my phone. Is it possible that I flashed the version say for the i747 but not the m version and that is why the phone wont move past the samsung screen? Also should I attempt to get rid of twrp before flashing the stock firmware. This should answer all my questions and then I will explore the stickies some more.
cdriver said:
Sweet I will definitely check that out. So I did flash twrp to my phone. Is it possible that I flashed the version say for the i747 but not the m version and that is why the phone wont move past the samsung screen? Also should I attempt to get rid of twrp before flashing the stock firmware. This should answer all my questions and then I will explore the stickies some more.
Click to expand...
Click to collapse
If flashing a stock ROM, flash the Telus one. If flashing a custom ROM, it doesn't matter (I747 or M variant), as long as it's D2LTE.
Your recovery doesn't change anything to flashing with Odin, it will overwrite it.
Flashing the stock firmware fixed my problems. Thanks for all of your help and I will definitely be checking out the links that you sent me before trying to root again tomorrow.