Hi XDA!
Recently, my SD card reached its limit and I now only have around 100 mb of space, no matter what I do.
Using the MIUI file manager, I can see that under the tab 'other' (i think that is what its called, danish locale), it shows 1.7 gb used storage. Searching through the objects in the category, I only see small 20-900 kb files and some 100 mb, which apparently is my backup files.
Seeing it keeps rising, I thought about formatting and start over.
Is there any folders or files (beside my photos etc.) That I need to backup prior to formatting?
Also, could I just format it using Windows, if mounted as external harddrive?
Thanks in advance!
- Nagelzz
Sent from my HTC Desire using XDA App
I'm pretty sure there is no need for a full format, why don't you just delete the folders with those unnecessary backups and locale files?
Folders that I think need to be backuped if you decide to format afterall are those with a dot in the start of their name (altough I'm quite sure that even those are not important) and probably those that contain files that your programs use for backuping things (like notes, smsbackups, dropbox or whatever). I wouldn't format it though with windows, try sd formatter (google it) or format it with gparted just to be sure it won't corrupt your ext partition(s) if you have them...
Sent from my HTC Desire using XDA Premium App
Link2SD Problem... HELP!!!
Hello I have a HTC Desire Bravo(GSM) running CyanogenMod9 4.0.4 ICS. I have a 16GB MicroSD memory card and need to partition it to allow Link2SD to move apps and free the *tiny* storage my phone has.
I have got gParted LiveCD and I created a 1.5GB partition for Link2SD and formatted it to EXT3 (as instructed by CM9) but then when I come to open Link2SD on my phone to set it up, it asks me for the filetype so I select "EXT3" and it says the following:
Mount Script Error
------------------
Mount script cannot be created.
mount: mounting /dev/block/vold/179:2
on /data/sdext2 failed: Invalid argument
ext3 may not be supported on your device. Try FAT32
on the second partition.
Now before this I had CyanogenMod 7 build 2.3.7 and it worked fine but up until I upgraded to CM9 ICS it decides not to work. I formatted and reformatted my card to try all other options but it didn't work. Would I HAVE to use FAT32 on my second partition or is there something I am doing wrong??
Thanks
Related
I'm really confused, first with all the different a2sd variants and ones that are made by Darktremor or other people or the FroYo version. This is as much as I know for this app.
Secondly, I really couldn't find any information on doing partitions manually or setting ALL partitions to ext since I have a linux box, I really don't care to use windows to copy over files or whatever. I have a VMware box to do that on my windows machine anyways.
Third, the ClockworkMod recovery has NO options to do the partition following Darktremor's faq, and I don't know if I should install another recovery after flashing my hboot to 0.93 S-OFF (Alpha)
Mind you I only had my android for about 6 days and this is my first one, so learning curve is hard.
Please help
1) the names can be confusing but old apps2sd is an ext partition on your SD card that appears to the system as internal storage. Froyo apps2sd is using Froyo to transfer mapps to the fat32 partition (normal partition) of your SD card. You just need to use context because people tend to use apps2sd for both.
2) you can use gepart to partition. You need a fat32 partition for apps to write to and for any personal data because Android looks to that partition for that kind of data. I have my SD card as 5 gb fat32 and 3 gb ext3. Fat32 goes first.
3) go to ROM manager. Partition SD card. Choose size....there is only 3 sizes though.
If anything I wrote is wrong I'm sure I'll be corrected.
Sorry to hijack the thread, but since this is related to a2sd in general I might as well ask it here. What's the effect of having a2sd+ on your battery? Would it lower battery life due to cache and apps being stored mainly on SD instead of internal memory? I observed that this was often the case when I store always-on apps on SD back on my old Windows device.
So no way of not using a fat32 eh?
It still seems I don't have much space left after using the Rom manager way. I have 120meg free on internal mem.
Could I just format using linux mkfs? I want to make the apps partition about 2GB to hold more apps. Though it seems some widgets can't take putting on SD card, it dissipates.
BriEE said:
So no way of not using a fat32 eh?
It still seems I don't have much space left after using the Rom manager way. I have 120meg free on internal mem.
Could I just format using linux mkfs? I want to make the apps partition about 2GB to hold more apps. Though it seems some widgets can't take putting on SD card, it dissipates.
Click to expand...
Click to collapse
Widgets must be installed on internal storage, or they wont work.
If you want an easy method to make a ext 3 partition use ROM manager premium from the Market. It will make you automatically an ext3 partition with a maximum of 512 mb which is enough (put swap to 0). Just keep in mind that first inside ROM Manager you need to select the option Flash ClockworkMod Recovery, and after that go to the SD partition option otherwise it wont work. And also remember you need to have the PREMIUM version otherwise it might not work
Now if you want to have more than a 512 mb you can use gparted. It is a livecd which means that can work on linux, mac or windows just reboot with the cd inside and is quite straightforward to use. Hope this helps.
Hello guys, any thought about that issue maybe?
http://forum.xda-developers.com/showthread.php?t=816098
Hey, so I've rooted my phone, installed CWM. Now I'm kinda confused how to install Link2SD.
I've a 16 GB SD card with me. All I need to do is, boot into recovery and then partition the SD card?
Do I need to do anything else?
Also, What's that swap memory? (The option which comes after selecting the partition size) What should I choose in that part? I read somewhere that I should choose 32/64 MB only..
I'm using HTC Wildfire S A510e with the latest update having Gingerbread 2.3.5
Thanks
Well partition your SDcard and create two primary partitions. Format the second partion as ext4 and use tune2fs to disable journalling.
Install Link2SD configure it and select ext4 as the second partition. It will automatically mount it then.
I'm still trying to contact the developer to mount without barriers and atime to get better performance.
i used minitool partition wizard on my pc to do it, but i think you can through CWM as well. i originally tried making the 2nd partition FAT32, but my l2sd didnt recognize it, so i redone it in sdext2. on my wifes wildfire s i tried ext2 first, and ended up having to change it to FAT32. theoretically you should be able to use the partitioning on CWM and get l2sd to work, but if it doesnt detect your second partition then just try different formats if you can. minitool is a free program if you need it, and is available with a simple google search. there are also several other threads about l2sd all around xda and the net, so if you get stuck just search them up. once partitioned, go into l2sd and press the menu button and select more, then create mount scripts. this will get it running, and also will show if there are any issues with your partition.
Hey People,
As the title shows I have some questions about using Link2sd correctly.
First off my phone is rooted and is using a standard VM rom with most of the bloatware already removed and apps2sd built into the rom.
I am only using a 4 gig SD card that has 2 partitions.
In Link2sd SD(/mnt/sdcard) card shows total .97GB and SD Card 2nd Part (/data/sdext2) has total 2.84GB.
I think I have them backwards, should /mnt/sdcard be the larger partition since that is the one I have access to?
And what is the difference between Linking something to the SD card and just moving it to the SD card?
From what I have gathered when something is Linked to the SD card it gets moved to the /data/sdext2.
And if you just move it to the SD card it gets moved to the /mnt/sdcard partition.
When would you choose one over the other?
Thanks
Quick study Links2SD can move any app; A2SD can only move apps written to be moved to SD [/sdcard]. I prefer to use the ext2 or ext3 [/sdext] as much as possible for apps as its a native file system [android is a linux branch after all]. The fat32 can cause longer delays at boot time imo. I believe your partition sizes to be a good choice though. Your fat32 will fill up with nandroids, downloaded roms and mods, music, documents and such before you know it
Hope that helps.
Rob
Sent from my HTC_A510c using Tapatalk 2
I think your ext partition is to big for a 4gb sdcard, you may want to reduce it to 1gb or 2gb if you have plenty of apps. Let me tell you more about this link2sd, app2sd and data2sd so that you will understand better and be able to decide which is suitable for your phone.
As mentioned above, link2sd moves apps to your ext2/ext3/ext4 partition. But not only apps or the apk's, it also moves the dalvik, cache, and library files supporting the apps. The advantage of link2sd is the freedom to choose which of those you want to move. You can easily check or uncheck this options during the linking process.
Native app2sd moves apps to the fat32 partition (/sdcard). And it only moves the apk, leaving cache, dalvik and library files in the internal memory. If you have several applications moved in this manner, a certain portion of your internal memory is still being consumed.
There's also Data2Sd, it creates a link of the entire /data folder and moves everything to the ext partition. Logically speaking, your ext partition becomes your /data partition. The original data partition now becomes a useless space. The advantage of this is the size of your internal memory, which is only limited to the size of your ext partition. But there's also a disadvantage, to use app2sd you need a fast sdcard (category 6 and above is recommended) because everything is now residing on the sdcard which is normally slower than the built-in memory and may result to lagging on some applications.
I have a new SD cart I have partition it like the 1i use know
How do I copy all of my staff from one card to another? So that link 2sd will work with no problem?
Sent from my HTC Wildfire S A510e using Tapatalk 2
anhelogr said:
I have a new SD cart I have partition it like the 1i use know
How do I copy all of my staff from one card to another? So that link 2sd will work with no problem?
Sent from my HTC Wildfire S A510e using Tapatalk 2
Click to expand...
Click to collapse
I you mean the apps linked into your old sdcard, then do this:
1. Backup all your apps using titanium backup. The backup will be stored in your /sdcard under "TitaniumBackup" folder.
2. Use a card reader to copy that folder to your new sdcard.
3. Insert your new sdcard to your phone, then download and reinstall titanium backup.
It will automatically scan for backup up files in your sdcard and will allow you to restore all your apps.
Ok thanks s I will try this
Send from my Wildfire S Rom : Wildchild Lite v1. 1
Why is link2sd not finding my ext 2 particion ?
Is this because I used cwr to particion my SD card ?
I have made a 2gb ext2 with 512 swap I have linked a lot of apps to SD card but when I get the memory status I get the SD particion not detected
What can I do? The think is that the phone works fine
Send from my Wildfire S Rom : Wildchild Lite v1. 1
2GB is probably more that you'll ever need. I've always used 1GB and it has not yet run out.
Could you clarify what you mean when you say that you have linked a lot of apps but the SD partition is not detected?
Does Link2SD say that the apps are on the sdcard or the apps are LINKED to SD?
AceRoom said:
2GB is probably more that you'll ever need. I've always used 1GB and it has not yet run out.
Could you clarify what you mean when you say that you have linked a lot of apps but the SD partition is not detected?
Does Link2SD say that the apps are on the sdcard or the apps are LINKED to SD?
Click to expand...
Click to collapse
Well the problem is this when I open the link2sd a windows pops up and tells me to choose
Ext2 ext 3 ext 4 fat 32 if I choose ext 2 it say that it can't found the ext2 and I have to do a restart then it finds the ext2 and tells me to restart again if I do not turn the phone off there is no problem but if I turn the phone off at night I have to do this again:banghead: in order for the link2sd to find the ext2 partition if I go to link2sd settings storage use the 2end partition is not available only if I do 2 restarts
Sent from my HTC Wildfire S A510e using Tapatalk 2
Did you ever use data2sd or s2e or anything else which uses the sd-ext partition? It sounds like there might be a conflict between different startup scripts.
Could you open a root explorer (Or terminal or adb) and find the init.d folder.
On my CM9, the folder is at /system/system/etc/init.d
Post here a list of all the files inside that folder.
AceRoom said:
Did you ever use data2sd or s2e or anything else which uses the sd-ext partition? It sounds like there might be a conflict between different startup scripts.
Could you open a root explorer (Or terminal or adb) and find the init.d folder.
On my CM9, the folder is at /system/system/etc/init.d
Post here a list of all the files inside that folder.
Click to expand...
Click to collapse
No I haven't use anythink
I have a new rom Installed with link2sd ready for use
I have a lot of free space the rom is what I wanted the only promplem is this :banghead:
The solution is never turn off my phone (I think this is no good for any phone )
Send using Htc Wildfire S
Rom Wildchild v1.1
anhelogr said:
No I haven't use anythink
I have a new rom Installed with link2sd ready for use
I have a lot of free space the rom is what I wanted the only promplem is this :banghead:
The solution is never turn off my phone (I think this is no good for any phone )
Send using Htc Wildfire S
Rom Wildchild v1.1
Click to expand...
Click to collapse
I've got confirmation that the Link2SD/a2sd in this ROM are working just fine. Many users have reported that; and a few users have even told me that Data2SD also works just fine (I dunno... I only use Link2SD) with the only point being that you can't delete/uninstall any of the app2sd scripts that come bundled with the ROM. If you must use Data2SD (why??) then simply install it and you're off and running. Other than that, Link2SD should work just fine (it does for me and, literally, hundreds others).
I suspect this has to do with what/how you restored from Titanium Backup... or the fact that you partitioned with CWM. No offense, but CWM's strength is in backup/recovery, not partitioning (or even partitioning WIPING, if you read a few key posts on this forum).
I suggest you format with MiniTool Partition Wizard (lots of good tutorials on XDA). I'm using ext2fs myself and it works just fine (of course, ext4fs also works... I've tried it myself).
Good luck,
Tigger31337 said:
I've got confirmation that the Link2SD/a2sd in this ROM are working just fine. Many users have reported that; and a few users have even told me that Data2SD also works just fine (I dunno... I only use Link2SD) with the only point being that you can't delete/uninstall any of the app2sd scripts that come bundled with the ROM. If you must use Data2SD (why??) then simply install it and you're off and running. Other than that, Link2SD should work just fine (it does for me and, literally, hundreds others).
I suspect this has to do with what/how you restored from Titanium Backup... or the fact that you partitioned with CWM. No offense, but CWM's strength is in backup/recovery, not partitioning (or even partitioning WIPING, if you read a few key posts on this forum).
I suggest you format with MiniTool Partition Wizard (lots of good tutorials on XDA). I'm using ext2fs myself and it works just fine (of course, ext4fs also works... I've tried it myself).
Good luck,
Click to expand...
Click to collapse
I though the same that the problem is the partition method I use I will try the mini tool
Send using Htc Wildfire S
Rom Wildchild v1.1
I found the problem I was selecting ext2 for link2sd but when I use mini tool it said ext3 so I load up again the card start link2sd ext3 reboot and vouala all ok know I really enjoy my phone
Send from my HTC Wildfire S
ROM. Wildchild. v2. 0
Alright, this is a guide for those people who need to increase/decrease their size of ext2/3/4 partition or even change SD card as I did from 2 GB Samsung to 4 GB Kingston Class 4.
This has been tested on windows 8.
Windows only recognizes the first partition of any removable device, this is where the problem lies while changing SD card or while making the amendments to your Ext partition. You apps will all be LOST if you format without care. Don't get hyper, this is quick and easy guide.
Things you will need.
1.Minitool Partition wizard home edition (probably the same which you used to create the partition)
2.Ext2 Volume manager.
3.Ext2IFS for windows.
USB mount is strictly not advisable, use a card reader. If you don't have any then use a mobile which is not an android, Nokia as for example.
1. Switch your mobile off, remove SD card. Insert it into card reader and then to USB port.
2.Windows will show you your FAT/FAT32 partition.
3.Backup your FAT/FAT32 partition. This is because you are gonna delete this partition.
4.After backing up open Minitool Partition wizard, delete your FAT/FAT32 partition. Be sure to delete this only, DO NOT DELETE EXT2/3/4. Apply those changes.
5.Go to Ext2 Volume manager and select the removable SD card. Double click on Linux partition. Then click on mount points and done.
6.Go to My computer and you will find your Ext2/3/4 partition as a removable drive. Backup this, be sure to copy all the files. Do not leave any file.
7.Now delete this partition from Minitool Partition wizard, your full card is empty now.
8.Create a new parition as primary and Ext2/3/4. Drag this to the far right. Be sure that all the unallocated space is before this Ext partition. Not even a single MB should be after this partition. Apply changes. Select the size of partition according to your convenience.
9.Copy all those EXT backup files to this Ext partition. Windows will show this partition now. If it does not, go to Ext2 Volume manager and do the steps you did before.
10.Now that you have created an Ext partition of your desirable size. Go to Minitool Partition wizard and create a primary FAT/FAT32 partition in the unallocated space. Apply changes.
11.Copy those backup files on this new partition of fat file system which you copied. Now the Ext partition will not be shown in windows.
12.You are done! Insert SD into your phone and power it on. The first boot will take a little longer than normal.
13.Go to link2sd and check the storage, you will be having all the apps + your partition size is increased/decreased now.
If you have any problems tell me.
To all those who want to create a pictorial guide, DO IT BUT INCLUDE A LINK TO MY ORIGINAL GUIDE.
Close to 100 views still nothing here. :/
Sent from my GT-S5360 using XDA
Master_Key said:
Close to 100 views still nothing here. :/
Sent from my GT-S5360 using XDA
Click to expand...
Click to collapse
I believe that increasing means getting bigger ext partition without the need to re-partition the card. If I were you I would create a guide in RESIZING EXT PARTITIONS, else rename your guide to "how to repartition a SD Card"
Sent from my GT-S5360 using xda premium
Sorry, changed it.
Well that day I had laptop and since then I am using mobile so forgot to check the caption.
Sorry again
Sent from my GT-S5360 using XDA
Problem
I followed all of your steps to the letter to repartition and increase the size of my link2sd partition and after rebooting my phone, I'm getting nothing but error messages and "force close" left and right. I'm not sure at all what had gone wrong. :/ I backed up every single file from both partitions, but everything appears to be borked.
UPDATE: it's apparently not mounting the second partition; that's at least what it seems to be telling me as I'm going through some of the stuff on link2sd
ElusiveZatchmo said:
I followed all of your steps to the letter to repartition and increase the size of my link2sd partition and after rebooting my phone, I'm getting nothing but error messages and "force close" left and right. I'm not sure at all what had gone wrong. :/ I backed up every single file from both partitions, but everything appears to be borked.
UPDATE: it's apparently not mounting the second partition; that's at least what it seems to be telling me as I'm going through some of the stuff on link2sd
Click to expand...
Click to collapse
Can you tell me in more detail what did you do?
Also what kind of SD card are you using and other details.
increase 2nd partition of SD card without losing data
My SD card's 2nd partition is FAT32 and I'd like to increase it's size. How do I do it without losing my apps installed on there?
I tried connecting it to card reader and using miniTools to increase the size but it only allows NTFS partition to increase without losing data.
increase size of partition 2
Hi, just a quick question, can I increase the size of partition 2 without formatting or losing files and data?
Hello guys,
I've got a problem.
I've been following the following guide "http://www.link2sd.info/description" in order to create a partition with Minitool Partition Wizard and link/swap all my apps on my SD card.
So I've got two partitions on my SD card now:
- The first one, "kingston (F)" - 14 Go FAT32 which is where I store all my data.
- The second one, with no name, 780 Mo FAT32 which is used by Link2SD to link and install my apps.
So far, everythings fine, Link2SD is working as it should be.
My only problem is: the second partition (the one used by Link2SD) does not show in windows 7 explorer. It is not visible on my computer and I cannot access to the data on this partition. Which is a shame as I want to backup all these data, just in case. And I want to upgrade my SD card to 32 Go so I need to copy and move all this data from my current SD card to the new one.
Curiously, the partition on my SD card shows in Minitool Partition Wizard, it also shows in "ES File Explorer" on my phone, and it is also visible via Windows Disk Management program (but I cannot explore or access to it: it just shows as 780 Mo used separately, with no name, no letter).
Do you know what the problem is? Maybe I did something wrong when creating the partition?
Your help or suggestions would be very appreciated.
You didn't do anything wrong, it just doesn't work that way. Windows 7 doesn't know how to mount the 2nd partition, because Android doesn't tell it to mount as a drive. It's like you're asking why you can't mount the /data or /system partitions on Windows 7