UPDATE 2: Heathcliff74 has taken a look into the reason that this method wasn't working on phones with the HTC updates for Mango, and appears to have found a work-around! I strongly suggest that people try his version instead of mine. The instructions are similar but not identical. Scroll down to the bottom of this first post and use the HTC Interop Unlock XAP located there:
http://forum.xda-developers.com/showthread.php?t=1271963
If you want to post your results in this thread, please specify which XAP you are using, mine or Heathcliff74's. There are known limitations with mine. There still seem to be some limits with his, be we aren't sure exactly what they are yet.
UPDATE: This is disappointing, but apparently HTC has put yet another roadblock in our way. I'm working on a way around the next one. I can't say how long it will take, but I beat the last one (process arbitrary provxml on an interop-locked phone) and I'll beat this one (allow Connection Setup to modify the registry again, after the HTC updates).
I'll update this thread again when I have a new version to test. Guesses as to the problem's root cause, suggestions for fixing it, and anything else you've found are all welcome.
I'm not taking the initial release of the app down, but unless you have an HTC phone which somehow is on Mango, doesn't have the HTC updates, and isn't already interop-unlocked, this isn't going to do anything for you. If you are in that situation, have at it - for now though, I'm just leaving it up so people can download it and pull it apart.
What it does: Modifies your HTC phone to allow maximum unsigned apps, which will also allow you to deploy and run apps with ID_CAP_INTEROPSERVICES. This does not require rolling back to pre-Mango. It is designed for use on stock ROMs. It is expected to work on all GSM HTC Windows Phone 7 devices. It might even work on the Arrive (can't hurt to try). You can read more about Interop Unlock here: http://forum.xda-developers.com/showthread.php?t=1271963
What it needs:
HTC Windows Phone (in theory, any of them)
Developer-unlock (AppHub account or ChevronWP7 Labs should be fine)
Connection Setup app (it's in Marketplace under HTC Apps)
What you do:
0) Install Connection Setup, if you haven't already.
1) Start Connection Setup, just to make sure it works. You don't have to do anything, just start it.
2) Exit Connection Setup using the Back button (so it's not running or suspended).
3) Install HtcInteropUnlock.xap. You don't need to run it.
4) Run Connection Setup again.
5) Expand the AppBar menu (... at the bottom) and choose "manual select".
5.a) The Country and Carrier list-picker boxes should become enabled.
5.b) If they don't, hit "manual select" again, it takes two taps on my phone.
6) Tap on Country and select "Phone Customization" (you can use the jump list to get to P quickly).
7) Carrier should automatically change to "Dev and Interop Unlock" (make sure this happens).
8) Hit the check mark at the bottom (AppBar "ok").
9) Make sure it reports success, then hit Done.
10) Try to install / run an interop app (or just install an 11th unsigned app).
Please report what happens, including the following info:
Your phone model (mine is HTC HD7, T-Mobile US branded).
Your version info (mine is 7720, no HTC Mango updates).
Success or failure of the whole operation.
If failure, indicate the exact step that went wrong, and what happened instead.
Be aware: This method does not damage your data connection in any way, but it will probably prevent Connection Setup from working normally. This can be undone. However, I didn't want to put the effort into making it reversible until I knew whether it worked on other phones, so if you need Connection Setup for its official purpose, don't install the initial release of this app.
This app builds on the work of multiple members of our community. Special thanks go to:
Heathcliff74, for researching interop-unlock and discovering the xap-deployer hack.
kounadisk, for researching how to add custom entries to Connection Setup.
I am already interop-unlocked but
OMG I am tempted to roll back to nodo, update the official way then unlock this way!
Watching this thread Kudos!
For what it's worth, I'm interop-unlocked already too, so I haven't actually tested this app on a non-IU phone. However, it should work just fine, provided that Connection setup was installed from the Marketplace.
On the plus side, by using this method you can restore your interop-unlock if you ever lose it (if you IUed the way I did, then an update might cause you to lose IU without being able to get it back the same way - but this method should still work).
that's worked
W00t! Can you please tell me your phone model and software version too? Thanks!
Radar 7740: The option shows up, I can "apply" it but it does nothing.
Surround 7740: I can apply Phone Customization but when I open HTCInteropUnlock app, nothing happens
TeNsTrKe15 said:
Surround 7740: I can apply Phone Customization but when I open HTCInteropUnlock app, nothing happens
Click to expand...
Click to collapse
Read the instructions...You just install the app and the follow the other steps. No need to open it.
Nothing special is supposed to happen. The change is invisible. As for the Interop Unlock app itself, it's just a stub - all of the "what it does" is entirely in the install process. Once it's installed, you can even remove the app.
Try installing this app: http://forum.xda-developers.com/showthread.php?t=1238519
If you can install it (without modifying the XAP file) then your interop-unlock worked!
Alternatively, try installing Registry Editor 1.2.0.0 from TouchXperience: http://forum.touchxperience.com/viewtopic.php?f=20&t=593. It goes in the Settings hub, but if you can install and run that, then there was great success!
MJCS said:
Read the instructions...You just install the app and the follow the other steps. No need to open it.
Click to expand...
Click to collapse
even so, i still cant install interop apps. error 0x81030120
TeNsTrKe15 said:
Surround 7740: I can apply Phone Customization but when I open HTCInteropUnlock app, nothing happens
Click to expand...
Click to collapse
I suspect this might not work if you have the HTC updates installed.... the OP indicated he has not installed any HTC updates
Ok, tried this on my HTC Titan.
I selected "Phone Customization" as country and "Dev and Interop Unlock" as carrier and applied these settings. The Connection Setup app reported that it successfully configured the phone.
But ... it does not seem to have any effect (yet, I hope!). I still can't sideload more than 10 apps.
My Titan is on WP7 version 7.10.7740.16.
Connection Setup app is version 1.12 (build 2119.18323)/
I'm hoping it works anyhow, but it's possible it wouldn't. It really depends what's in those updates.
For example, we know they modified the HTCFileUtility driver in some way, but we don't know exactly how. TouchXplorer stopped working, but Connection Setup (which also uses ComFileRW.dll) still works. I know it works because if it didn't, you wouldn't be able to see the Phone Customization option.
It's possible that the update made some other change that made it impossible to change the MaxUnsignedApp value from within Connection Setup or something unfortunate like that.
I can modify the app to make some more obvious change when Connection Setup does its thing. For example, forcibly change your phone's accent color or some such. Really, though, I'm hoping that won't be needed.
One thing to try is rebooting the phone. I don't think it's required, but it can't hurt and might help.
Can you make it write to a specific registry path and then tell us what that path is. I would like to see if it can at least write to the registry.
Dev/Interop applies from Connection Setup but can't install an app with interop (ansar's USBModeSwitch XAP) enabled (in my case 3rd unsigned app since i have a student account).
Mozart 7720, with latest HTC updates installed.
update: rebooted. not installing still. it auto-starts Connection Setup, ran it again, doesnt work still.
cheers.
GoodDayToDie said:
One thing to try is rebooting the phone. I don't think it's required, but it can't hurt and might help.
Click to expand...
Click to collapse
Rebooting does not help... Still can't sideload more than 10 apps.
I think it would be a good idea to try and edit some other registry setting in the provxml, that has visible consequences. Then at least we can verify if changing that setting works.
Didnt work for me. Unbranded HD7, HTC Updates 7720.
Sounds promising though
@MJCS: It already writes a test value to the registry:
KEY: HKCU\Software\DeployProvXml
VALUE: InteropUnlock
DATA: "Success" (String)
Can somebody who was already interop-unlocked but has installed the HTC updates use this app, then check if that value exists? It does on my phone, but of course I don't have the HTC updates.
What are the passwords for the dbz files?
Nevermind its 030D681B-1DFC-4bd0-A72A-A9B3CCCDA653
Yeah there must be some sort of time-bomb that clears out the interop setting.
http://forum.xda-developers.com/showthread.php?p=18916888#post18916888
GoodDayToDie said:
@MJCS: It already writes a test value to the registry:
KEY: HKCU\Software\DeployProvXml
VALUE: InteropUnlock
DATA: "Success" (String)
Can somebody who was already interop-unlocked but has installed the HTC updates use this app, then check if that value exists? It does on my phone, but of course I don't have the HTC updates.
Click to expand...
Click to collapse
My HD7S has all the latest updates, and is already interop-unlocked.
I tried the app out, and checked the registry and found no such entry.
I hope you get this figured out today before I pick up my Titan. Haha.
Related
This is discussed elsewhere, but deep within other threads, so I wanted to give it it's own thread to help people in finding out how to prevent Zune from relocking WP7 devices. It only works on HTC devices for now because TouchXplorer only works for HTC devices.
1. Install TouchXplorer
2. Install HTC Connection Setup
3. Download and extract this zip file to your PC.
4. Deploy the extracted XAP to your device
5. If XBMOD.Files.Deployer does not automatically run, run it from your App list on your device.
6. Using TouchXplorer on your device, copy \My Documents\My Ringtones\CustClear.provxml to \Windows\
7. Run HTC Connection Setup on your device, hit the ok button (with the check mark) to let it provision.
8. You're done.
If you unlock with ChevronWP7, apply this hack, and then for some reason your phone relocks, refer to DanielNTX's post to get it unlocked again. You need to install a new certificate, provided on his post.
All credit goes to xboxmod and his HTC Registry Editing thread and HTC WP7 Apps thread.
Hope it works for me... "thanks"
I tried this before and it didn't work. It revoked every application I had downloaded.
Yeah I had this done for a while but my question is can I uninstall the program once I've done everything else? It looks ugly in my app list =/
This Didn't work for me, had finally got it unlocked, came back 3 hours later, connected with this installed and also with flight mode on and now my phone's relocked. Make sure to block Windows Mobile Zune Communication Service from your firewall, while that was blocked it didn't relock
Psygnosis84 said:
I tried this before and it didn't work. It revoked every application I had downloaded.
Click to expand...
Click to collapse
What type of device do you have?
ceo4eva said:
Yeah I had this done for a while but my question is can I uninstall the program once I've done everything else? It looks ugly in my app list =/
Click to expand...
Click to collapse
You can uninstall it. The provxmls stay in the My Ringtones folder.
julianpitt said:
This Didn't work for me, had finally got it unlocked, came back 3 hours later, connected with this installed and also with flight mode on and now my phone's relocked. Make sure to block Windows Mobile Zune Communication Service from your firewall, while that was blocked it didn't relock
Click to expand...
Click to collapse
I don't bother with flight mode or any of the other tweaks and it still works for me. What device do you have?
Thanks. This works well. Finally, I don't need to unlock everytime after zune syncing.
Do you think this patch will be removed by MS at the next update as well as chevron unlock?
I think that chevron (the phone unlocker) doesn't work after OSupdate.
Yes, the method that ChevronWP7 uses will be disabled in the update... but that doesn't mean it won't be cracked open again.
After applying this patch there are 2 files in the My Ringtones dir - one of them is restoreCustClear.provxml file, which means it will revert the registry changes done by the first provxml file (custClear.provxml).
Do you think that if I activate my phone the Marketplace will start working as usual - downloading any apps without the error "can't get info right now... come back after a little while" , AFTER I've installed the above patch for not relocking the phone? I.e. in other words can I side-load apps and simultaneously continue to use the legacy Marketplace without any problems?
@thesecondsfade, applied the patch on my HD2.
Thanks
poceh said:
After applying this patch there are 2 files in the My Ringtones dir - one of them is restoreCustClear.provxml file, which means it will revert the registry changes done by the first provxml file (custClear.provxml).
Do you think that if I activate my phone the Marketplace will start working as usual - downloading any apps without the error "can't get info right now... come back after a little while" , AFTER I've installed the above patch for not relocking the phone? I.e. in other words can I side-load apps and simultaneously continue to use the legacy Marketplace without any problems?
Click to expand...
Click to collapse
Yes, you can sideload and download from the Marketplace simultaneously. I do it now on my HD7. It should be the same with an activated HD2.
julianpitt said:
This Didn't work for me, had finally got it unlocked, came back 3 hours later, connected with this installed and also with flight mode on and now my phone's relocked. Make sure to block Windows Mobile Zune Communication Service from your firewall, while that was blocked it didn't relock
Click to expand...
Click to collapse
I am just about to do this until i saw this!
Please confirm that this hack works!
PS: Unlocked my device yesterday and now it's still unlocked.. I downloaded and deployed youtube, shazam and other stuff without problem.. Strange though cause every one had this problem after unlocking and sync with Zune...But I don't!
So...do i have to make this hack or not?
Thanks
This works like a charm
I can not find CustClear.provxml in ringtones folder...!
arkatis said:
I can not find CustClear.provxml in ringtones folder...!
Click to expand...
Click to collapse
You sure you deployed the XAP? The path is \My Documents\My Ringtones
This method works like a charm! Thank you! I can now synchronise my phone with Zune without the phone getting relocked by Zune
Just love it!
Yes i deployed those 3 apps on my device...weird!
Brilliant
Works flawless on my HD2
arkatis said:
Yes i deployed those 3 apps on my device...weird!
Click to expand...
Click to collapse
Try it again. See what happens.
Thought I would write a thread showing how to simply complete an unlock with Chevron WP7 and some common homebrew apps/tweaks for all platforms. The information is scattered and varied, but I will edit this post to be as useful as possible for beginners as a one stop source. Thanks to the following threads for info:
http://forum.xda-developers.com/showthread.php?t=857127
http://forum.xda-developers.com/showthread.php?t=907971
http://forum.xda-developers.com/showthread.php?t=924497
Unlocking with Chevron WP7
The first step to "sideloading" applications to your phone (applications not approved by Microsoft) is to developer unlock your device.
Downloads needed:
Windows Phone 7 Developer Tools (annoyingly large, but necessary)
Chevron WP7 Application, Chevron Security Certificate, Chevron Registry Entry
TCPView for Windows (don't neglect this, it saves a lot of time and is a useful utility!)
Steps for unlocking:
Install Windows Phone 7 Developer tools. This will require a reboot at the end.
Email the "ChevronWP7.cer" file to your Windows Phone 7 device.
Open the email, tap on the attachment to download it. The icon will turn into a shield, tap again to get a new dialog. Press "Install" then OK.
Put your WP7 Phone into airplane mode (Settings>Airplane mode>Slide the toggle to ON)
Double click the ChevronWP7.reg file on your computer. A prompt will open up asking if you want to write this to your registry. Press Yes to continue, then OK at the end.
Open TCPView. (tcpview.exe inside of the downloaded archive) Click on the heading marked "Local Port" until the arrow next to it is pointing up.
Look on the Local Port column for any entries labeled "HTTPS". These programs MUST be closed for Chevron to work properly. Common culprits are Skype, and XAMPP. Use Task Manager (CTRL+ALT+Delete) to ensure they are closed if you run into issues.
Connect your phone to your PC via USB cable. Open the Zune software if it is not already open, and wait for it to finish syncing.
Open your Zune software and go to the Phone page, and make SURE you don't see anything that denotes that you are in a "Guest Sync" relationship with the device. It needs to be the primary computer the phone is synced with.
Unlock your phone and leave it at the home screen. Make sure the phone does not go to sleep after this.
Open ChevronWP7.exe. It should be running as administrator. Check both boxes, and press Unlock.
Cross your fingers, and you should be up and running on a developer unlocked device! (The Unlock button will change to Relock in Chevron if this is successful)
If you receive the error "Phone is locked with a PIN", it means your phone was locked when the fix was being applied. Make sure to unlock your phone (so you can see the live tiles) BEFORE pressing the unlock button.
If the program crashes, navigate to C:\Windows\system32\Drivers\etc and right click the file named hosts and press properties. Uncheck read only and press OK, then try again.
Homebrew Applications
All homebrew applications are installed as follows:
Go to Start>Programs>Windows Phone Developer Tools> and run Application Deployment
Ensure the target is "Windows Phone 7 Device"
Browse to the .XAP that you are loading.
Connect your phone, wait for Zune sync to finish. Ensure it is not guest.
Unlock phone and keep it awake. Press "Deploy" and the application should load (not extremely fast, and will appear in your app list without a reboot when done)
If the above doesn't work, then try resetting your phone and retrying. Also, restart your computer if the problem persists.
Registry Editor
DO NOT MESS WITH THE REGISTRY UNLESS YOU KNOW WHAT YOU ARE DOING!!!
Registry Editor for all devices (also has a download for TouchXplorer - a file manager for HTC phones only): http://forum.touchxperience.com/viewtopic.php?f=20&t=593 thanks to TouchXperience user schaps for this download.
Great thread on what registry tweaks are currently known: http://forum.xda-developers.com/showthread.php?t=907971
Ringtone Installer
Instructions and XAP downloads at the following link: http://www.chevronwp7.com/post/2054291102/chevronwp7-custom-ringtone-manager
Thanks to the Chevron WP7 team for this app.
Theme Color Changer
Instructions and XAP downloads at the following link:
http://www.daveamenta.com/2011-01/change-accent-colors-on-windows-phone-7-samsung-devices/
Thanks to Dave Amenta for this great app!
Prevent Phone from Relocking
The phone is unlocked, but will relock every time it syncs to Zune unless one of these hacks are done.
Samsung Devices (also removes sideload limit, fixes MMS/data on unlocked phones!):http://forum.xda-developers.com/attachment.php?attachmentid=498084&d=1295825731 from this great thread by lyriquidperfection
All other devices:
In an installed registry editor, navigate to the following key and change these values.
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg]
"PortalUrlProd"=""
"PortalUrlInt"=""
Let me know if anything should be added or if you need any help!
I just wanted to thank you again for making this. The only thing that I think would be useful would be to add links to extremely useful Registry hacks, like the power management ones for the Focus.
I try everthing but still can't unlock it again....
please make sure it is connected using usb
please start zune application
Try to reset your phone.
paullu said:
I try everthing but still can't unlock it again....
please make sure it is connected using usb
please start zune application
Click to expand...
Click to collapse
Did you already turn off your firewall during the procedure? Was a problem of mine and of a friend.
Sebo1985 said:
Did you already turn off your firewall during the procedure? Was a problem of mine and of a friend.
Click to expand...
Click to collapse
firewall off.still got the error msg
paullu said:
I try everthing but still can't unlock it again....
please make sure it is connected using usb
please start zune application
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=918710
or
http://forum.xda-developers.com/showpost.php?p=10463609&postcount=1
Sebo1985 said:
Did you already turn off your firewall during the procedure? Was a problem of mine and of a friend.
Click to expand...
Click to collapse
yes I did turn off firewall alreday.still no luck.
I unlock once and when i connect the pc again it lock again
How about MMS and Data for other non-samsung phones?
paullu said:
yes I did turn off firewall alreday.still no luck.
I unlock once and when i connect the pc again it lock again
Click to expand...
Click to collapse
did you see my post?
duhhh said:
did you see my post?
Click to expand...
Click to collapse
yes,thanks I am trying now
works for me,hope to works for you 2
HTC and LG offer utilities in their section of the marketplace for MMS/data, so just grab one of those! Samsung's utility is faulty by design to keep people from unlocking, thus the hack.
What does this mean? Is ig that samsung phones have trouble unlocking because I bought my wife a focus and I had the same error message. But I haven't tried the way posted here. So I will be trying this way and replying. Thanks!
pls help me with this: I have HTC Surround and can not sync with zune, it doesn´t start when connect the phone and if start manually it doesn´t connect and sync neither
thank you for this one. it works exactly it was described on the first page. samsung omnia 7 portugal bought phone. but using it in Turkey.
Win Phone 7 MMS settings XML
So I dont know if this helps, or if anyone a little more knowledgable than I can attack this with me but I have the XML and registry settings for MMS from my LG quantum. I have a focus and LG Quantum. My LG has the XML viewer and reg editor built right in, which I friggen love.
So I took pix of the whole xml file that should be enough info to change the profile to the right settings, with the reg keys.
At first glance here it looks like just changing a couple string values... of the key at HKCU\Software\Microsoft\ShortMsg\MMS in the ADDR string value to your MMS server would be a start. I will look further into it after work tonight. If anyone beats me to it... so be it. Just thought I would toss this out there just in case it helps.
wm.andrew.wilson said:
Thought I would write a thread showing how to simply complete an unlock with Chevron WP7 and some common homebrew apps/tweaks for all platforms. The information is scattered and varied, but I will edit this post to be as useful as possible for beginners as a one stop source. Thanks to the following threads for info:
http://forum.xda-developers.com/showthread.php?t=857127
http://forum.xda-developers.com/showthread.php?t=907971
http://forum.xda-developers.com/showthread.php?t=924497
Unlocking with Chevron WP7
The first step to "sideloading" applications to your phone (applications not approved by Microsoft) is to developer unlock your device.
Downloads needed:
Windows Phone 7 Developer Tools (annoyingly large, but necessary)
Chevron WP7 Application, Chevron Security Certificate, Chevron Registry Entry
TCPView for Windows (don't neglect this, it saves a lot of time and is a useful utility!)
Steps for unlocking:
Install Windows Phone 7 Developer tools. This will require a reboot at the end.
Email the "ChevronWP7.cer" file to your Windows Phone 7 device.
Open the email, tap on the attachment to download it. The icon will turn into a shield, tap again to get a new dialog. Press "Install" then OK.
Put your WP7 Phone into airplane mode (Settings>Airplane mode>Slide the toggle to ON)
Double click the ChevronWP7.reg file on your computer. A prompt will open up asking if you want to write this to your registry. Press Yes to continue, then OK at the end.
Open TCPView. (tcpview.exe inside of the downloaded archive) Click on the heading marked "Local Port" until the arrow next to it is pointing up.
Look on the Local Port column for any entries labeled "HTTPS". These programs MUST be closed for Chevron to work properly. Common culprits are Skype, and XAMPP. Use Task Manager (CTRL+ALT+Delete) to ensure they are closed if you run into issues.
Connect your phone to your PC via USB cable. Open the Zune software if it is not already open, and wait for it to finish syncing.
Open your Zune software and go to the Phone page, and make SURE you don't see anything that denotes that you are in a "Guest Sync" relationship with the device. It needs to be the primary computer the phone is synced with.
Unlock your phone and leave it at the home screen. Make sure the phone does not go to sleep after this.
Open ChevronWP7.exe. It should be running as administrator. Check both boxes, and press Unlock.
Cross your fingers, and you should be up and running on a developer unlocked device! (The Unlock button will change to Relock in Chevron if this is successful)
Homebrew Applications
All homebrew applications are installed as follows:
Go to Start>Programs>Windows Phone Developer Tools> and run Application Deployment
Ensure the target is "Windows Phone 7 Device"
Browse to the .XAP that you are loading.
Connect your phone, wait for Zune sync to finish. Ensure it is not guest.
Unlock phone and keep it awake. Press "Deploy" and the application should load (not extremely fast, and will appear in your app list without a reboot when done)
If the above doesn't work, then try resetting your phone and retrying. Also, restart your computer if the problem persists.
Registry Editor
DO NOT MESS WITH THE REGISTRY UNLESS YOU KNOW WHAT YOU ARE DOING!!!
Registry Editor for all devices (also has a download for TouchXplorer - a file manager for HTC phones only): http://forum.touchxperience.com/viewtopic.php?f=20&t=593 thanks to TouchXperience user schaps for this download.
Great thread on what registry tweaks are currently known: http://forum.xda-developers.com/showthread.php?t=907971
Ringtone Installer
Instructions and XAP downloads at the following link: http://www.chevronwp7.com/post/2054291102/chevronwp7-custom-ringtone-manager
Thanks to the Chevron WP7 team for this app.
Theme Color Changer
Instructions and XAP downloads at the following link:
http://www.daveamenta.com/2011-01/change-accent-colors-on-windows-phone-7-samsung-devices/
Thanks to Dave Amenta for this great app!
Prevent Phone from Relocking
The phone is unlocked, but will relock every time it syncs to Zune unless one of these hacks are done.
Samsung Devices (also removes sideload limit, fixes MMS/data on unlocked phones!):http://forum.xda-developers.com/attachment.php?attachmentid=498084&d=1295825731 from this great thread by lyriquidperfection
All other devices:
In an installed registry editor, navigate to the following key and change these values.
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg]
"PortalUrlProd"=""
"PortalUrlInt"=""
Let me know if anything should be added or if you need any help!
Click to expand...
Click to collapse
Hi every memeber's and Thx for wm.andrew.wilson ; )
-I reply for your message because i still do every steps but nothing happened !!!!!
Because i relocked my WP7 .
After along nights unlocked was success ))
wm.andrew.wilson=>
- I think you miss this before doing evry thinks you must disable Lan card or Ethenet connection ...
- Then follow wm.andrew.wilson steps
- Don't worry your WP7 will not unlocked why ???
- For unlocked it you must close chevron wp7 notification
- Then enable internet connection (wlan or ethernet...)
- Reclick on chevronWP7.....and miracle
Your WP7 is UNLOCKED ENJOY .
THks for :>>>>>>>>>>> wm.andrew.wilson
Hi, I'm new here.
So I followed each step thoroughly, and when I execute 'ChevronWP7' and check off each box and click 'unlock', the program says it has stopped working.
What could be the issue?
Also:
I have the phone on the main menu
I do have all necessary programs running
Samsung re-lock prevention hack doesn't work for me
After deploying the xap it seems to take, but, my Focus is always relocked after syncing. Not a huge deal to unlock before deploying, but, thought it was worth a mention...
Edit: Nevermind. Didn't realize they're was an app on the phone to run as well... Should have read the original thread first. Sorry...
I'M A CHINESE.I hope my experience can help all WP7 fans. If this thread help you,It's my pleasure.
detail steps：
1. MAKE sure your phone has a 7004 or 7008 rom，than used chevronWP7.cer and chevronWP7.EXE to unlock your WP7. (this is step you can find in this forum)
2. After UNLOCK! prevent relocked. (belows is the easy way to edit your registry)
for HTC download xap in http://dl.dbank.com/c0u5q3xic8 and sideload it to your phone and run it ,press the green button.
for Samsung devices,see post #17 in this thread.
3. Update to NoDo via zune and your device still in unlocked state! (for some people cannot get nodo from zune, see below method,100% successful rate.)
methods to get zune nodo. http://forum.xda-developers.com/showthread.php?t=1012189 !!!!
Download USAIP.pbk open it and connect to EUROIP PPTP Hungary with
USERNAME: demo
PASSWORD: demo
Connect your phone to the PC
Disable WIFI in your phone but be sure not to open FLIGHT MODE
OPEN "Use cellular data connection to check for updates" in SETTINGS-UPDATE, AND KEEP YOUR PHONE IN THIS SCREEN
Start Zune and keep it running all the time
Manually search for an update within Zune (setting-phone-update)
After a few seconds (about 20-25 seconds for me) disable "Use cellular data connection to check for updates on your phone" --> WAIT FOR 20-30S,The update shows up! and enjoy it!
I MANAGED TO GET UPDATE BY USING THIS METHOD!!!
HAVE fune!
the update should go via zune. it should be official update。
If it works that's good news.. But is it that easy? I would thing that the update edits the registry...
If you update to 7008 the unlock still works that I know.. Are you sure that's not what happaned.. And you just got the Pre-NoDo update...?
BellPego said:
If it works that's good news.. But is it that easy? I would thing that the update edits the registry...
If you update to 7008 the unlock still works that I know.. Are you sure that's not what happaned.. And you just got the Pre-NoDo update...?
Click to expand...
Click to collapse
the vision is 7390.after 7008，unlock，then prevent unlock， then connect to zune， if you can find update， then you success。many chinese succeed，the only problem is MS，it promise everyone can update，but only very few people receive the notice of update through zune。
March thanks for XDA-DEVELOPERS(xboxmod)!
But I am still waiting the Nodo Version in Hong Kong, if it is true, it is a great job for the user!!!
I am a user of HD2 with wp7 two days ago.but now I have to switch to Android again as the wp7 is not fully developed,I think.anyway...thanks for sharing the good news...謝謝!
It seems to work based on user replies. However, it requires HTC-ProvXml-Deploy to work. What about us non-htc users?
as it was already said, we need to know if it works on non HTC devices?
Can anyone post the xap here?
Registered and downloaded the xap. It's attached as a zip, just change the file extension from .zip to .xap.
Wondering if this will truly be our way to update to NoDo and still keep our devices unlocked...
eternalemb said:
Registered and downloaded the xap. It's attached as a zip, just change the file extension from .zip to .xap.
Wondering if this will truly be our way to update to NoDo and still keep our devices unlocked...
Click to expand...
Click to collapse
thanks! I still cannot update to NoDo from Zune. Though my phone is unbranded
Is it the same with this?
[HTC] Prevent WP7 from Relocking
http://forum.xda-developers.com/showthread.php?t=913748
thats great, im sure this will be very helpfull to get a real JB goin...
too bad ive already updated :/
lemme quote the first post of the site translated (powered by microsoft translator):
http://www.qdppc.com/thread-48290-1-1.html said:
"Frog brothers produced"
---Prevent once and for all small patches of the lock (Prevent Relock:1B)
Simple, perfect, effectively address the WP7 lock problem again!
From then on no longer careful, make you lechery tour ZUNE!
Note: HTC models suitable for
Frog (Wagool) by XDA-DEVELOPERS (xboxmod) information produced by XAP patch (formerly:http://www.qdppc.com/thread-48230-1-1.html), an effective solution to mobile phone unlocking (prison break) is locked again after question!
"Steps"
1, verify that the phone has "escaped";
2, Prevent Relock.xap deployment installation attachment to mobile phone,immediately disconnect the ZUNE connection;
3, mobile Executive HTC-ProvXml-Deploy program, pressGreen(OK) button;
4, after you restart the phone, remove HTC-ProvXml-Deploy, well, everything OK!
"Description"
If the reset system (hard restart, restore factory, brushing machines), you need to "escape" and install this patch!
Reprint please specify the source
March thanks for XDA-DEVELOPERS(xboxmod)!
----------------
1, immediately disconnect the purpose is to prevent before continuing to the next step, have also been locked (in fact, in "flight mode" or under)
2,Deploy delete it or not as you, in fact, at this point the useless
PS: I'm not "boring", is a frog, HA HA ~ ~
Wagool
Click to expand...
Click to collapse
I received this morning notice of NoDO update... but I can wait a few days before to do...
harmoniic said:
Is it the same with this?
[HTC] Prevent WP7 from Relocking
http://forum.xda-developers.com/showthread.php?t=913748
Click to expand...
Click to collapse
+1
Any one plz answer this.
info5i2002 said:
It seems to work based on user replies. However, it requires HTC-ProvXml-Deploy to work. What about us non-htc users?
Click to expand...
Click to collapse
The whole prevent-relock thing essentially does this:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg]
"PortalUrlProd"=""
"PortalUrlInt"=""
On Samsung devices you can use the TouchXplorer Registry Editor to do this. Though it has limited access on Samsung devices. It will show an "Access Denied" when you open the DeviceReg registry-key. But it will still allow you to create new values there and overwrite the old values. So, open the DeviceReg-key and create the "portalUrlProd" and "PortalUrlInt" values as empty strings. That will prevent your Samsung from relocking. And as it seems, that tweak will even survive the NoDo-update.
is that only for htc device?
Heathcliff74 said:
The whole prevent-relock thing essentially does this:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg]
"PortalUrlProd"=""
"PortalUrlInt"=""
On Samsung devices you can use the TouchXplorer Registry Editor to do this. Though it has limited access on Samsung devices. It will show an "Access Denied" when you open the DeviceReg registry-key. But it will still allow you to create new values there and overwrite the old values. So, open the DeviceReg-key and create the "portalUrlProd" and "PortalUrlInt" values as empty strings. That will prevent your Samsung from relocking. And as it seems, that tweak will even survive the NoDo-update.
Click to expand...
Click to collapse
The xap samsung tools does the job automatically which is easier to use
Marvin_S said:
The xap samsung tools does the job automatically which is easier to use
Click to expand...
Click to collapse
So someone has tried to change these keys and update to nodo to see!!!!
Hi hackers,
Version 2.1 of DeployProvXML is here, and should be more robust than the previous version:
1: The CustClear.provxml file is now copied both using the filesystem DLL (like v1) and using XML provisioning (hopefully works aroudn the HTC update blocking filesystem access.
2: The CustClear.provxml file is now self-chaining. Really, this time - so long as you run the program *once*, you can even change the included CustClear.provxml, re-deploy, and run Connection Setup; your new version will then be copied to \Windows. (Re-run CS to actually process your new version). No more need to re-run DeployProvXML after each use of Connection Setup!
3. The program now contains more diagnostics. It sets a registry value at launch (using ComRegRW.DLL), changes that registry value (using provxml) when deploying the file, and changes it again when the deployed file is processed by Connection Setup (as part of the CustClear.provxml). It also checks that the value is as expected avter deploying.
REQUEST:
Anybody who has an interop-unlocked HTC phone with the latest official HTC update (meaning you can't use TouchXplorer anymore), please run this app, then run Connection Setup, then use a registry editor to check the key HKCU\Software\DeployProvXML. It should have a value, LastOperation. Please include the data in the value (or the fact that it doesn't exist) with your reports. Thank you!
Description:
Another handy little utility for people with HTC phones, this app simply copies a CustClear.provxml file from its install directory to \Windows, then exits. The idea is to make sure that you're never without at least a basic file that can be used by Connection Setup to unlock your phone. New in v2, every time you run Connection Setup, the file will automatically restore itself to the Windows directory. This ensures you'll never accidentally get caught with a locked phone after an upgrade or something!
The included Provxml has three parts. However, you can customize it however you like by opening the XAP file and editing the embedded provxml. The parts are:
1: Applies the registry settings to unlock the phone, including Interop-Unlock.
2: Applies a test value in the registry, at HKCU\Software\DeployProvXML. This value is harmless but can be used to test if the app is working.
3: Chain-copies itself from DeployProvXML's install folder into Windows again, replacing the copy that Connection Setup consumes.
Note that this program does not actaully apply the provxml, merely copies it to where Connection Setup expects to find it. It should close immediately after starting; this is not a bug. If you see a dialog box instead, something went wrong and you should report it below!
This program is only going to work on HTC phones, since it uses the HTC DLLs for provxml, file access, and registry. It is a 7.0 app but is compatible with Mango if you have Interop Unlock already.
XAP is in DeployProvxml\bin\debug. Source included for those interested.
Do you think a deployer for OMNIA 7 is possible ?
Maybe with a .dll of WP7 Root Tools ?
So users who didn´t prepare their device for our OnDevice provxml app under NoDo could also enable this feature...
contable said:
Do you think a deployer for OMNIA 7 is possible ?
Maybe with a .dll of WP7 Root Tools ?
So users who didn´t prepare their device for our OnDevice provxml app under NoDo could also enable this feature...
Click to expand...
Click to collapse
This has been solved I can finally test the app myself now. I changed the path to copy the provxml from the iso storage of the app instead of the provxml folder.
Interop.Services
Just read this http://translate.google.com/transla...oducing-windows-phone-7-5-native-programming/
Any joy?
Looks cool, but I'll need to investigate further. It has definitley been reproted that Homebrew apps without ID_CAP_INTEROPSERVICES don't work even in Mango. It sounds like this guy is maybe using a marketplace signed DLL, though? Not sure - the translation isn't great. He's working from an app that I've never explored, and that appears to be specific to the Japanese Mango phone.
how do we use it. will it permanently unlock when we update to official Mango?
Ttblondey said:
how do we use it. will it permanently unlock when we update to official Mango?
Click to expand...
Click to collapse
Install app in NoDo.
Run in once.
Upgrade to Mango.
Run the Connection Setup app (from Marketplace).
Hit "OK" in Connection Setup.
Your phone is now dev-unlocked and will not automatically relock. Additionally, you can now install Mango homebrew.
I suggest you then run DeployProXml again, since installing an update, even something like a HTC firmware update, may re-lock the phone. So long as you've run DeployProvXml since the last time you ran Connection Setup, though, you can unlock again.
If this helps, please hit Thanks!
piaqt said:
Just read this http://translate.google.com/transla...oducing-windows-phone-7-5-native-programming/
Any joy?
Click to expand...
Click to collapse
he does pretty much the same from what I read. You just use oem dll's and have some native functions to work with. f/e htc has file operations + regoperations + provxml, samsung has regoperations + provxml (trough which you can do regops). This manufacturer dll probably contains fileops as well, which is nice since there might also be a chance that there will be a working provxml method and with the fileops you can copy the provxml files to the desired location. In theory ofcourse.
Marvin_S said:
he does pretty much the same from what I read. You just use oem dll's and have some native functions to work with. f/e htc has file operations + regoperations + provxml, samsung has regoperations + provxml (trough which you can do regops). This manufacturer dll probably contains fileops as well, which is nice since there might also be a chance that there will be a working provxml method and with the fileops you can copy the provxml files to the desired location. In theory ofcourse.
Click to expand...
Click to collapse
There are two differences that are worth noting, though.
A) This is a phone that came with Mango. There was never any chance to unlock it for Mango homebrew. It blocks apps with ID_CAP_INTEROPSERVICES - something we had to work around with registry edits.
B) Related to A, he can call native code without having ID_CAP_INTEROPSERVICES. This isn't supposed to be possible at all. Makes me wonder if he's actually calling anything in the DLL or if he's just loading the COM object but not using it and calling that success.
GoodDayToDie said:
There are two differences that are worth noting, though.
A) This is a phone that came with Mango. There was never any chance to unlock it for Mango homebrew. It blocks apps with ID_CAP_INTEROPSERVICES - something we had to work around with registry edits.
B) Related to A, he can call native code without having ID_CAP_INTEROPSERVICES. This isn't supposed to be possible at all. Makes me wonder if he's actually calling anything in the DLL or if he's just loading the COM object but not using it and calling that success.
Click to expand...
Click to collapse
Ahh yeah your right. Yeah I realy wonder what the trick behind it is and if he manages to install it.
Something else I have not tried yet, but what happens if you deploy it without the id_cap and than run it. It will not work obviously, but what happens if you redeploy with the tag in? Will it still get rejected? Because the phone rejects the app I think.
Hey, the ZIP contains a folder, which, if I package into a XAP, fails on deployment. What's the best way to get this packaged into a usable XAP?
trying to figure out how to install this app.
@thesecondsfade:
Bottom line of the first post:
"XAP is in DeployProvxml\bin\debug. Source included for those interested."
I distribute most of my apps this way, unless the source is really big and the XAP alone is a significantly smaller download for some reason.
@Ttblondey:
Is your phone dev-unlocked?
Is your phone either pre-Mango, or interop-unlocked?
Do you have a XAP deployment program and the Zune software?
GoodDayToDie said:
@thesecondsfade:
Bottom line of the first post:
"XAP is in DeployProvxml\bin\debug. Source included for those interested."
I distribute most of my apps this way, unless the source is really big and the XAP alone is a significantly smaller download for some reason.
@Ttblondey:
Is your phone dev-unlocked?
Is your phone either pre-Mango, or interop-unlocked?
Do you have a XAP deployment program and the Zune software?
Click to expand...
Click to collapse
My TouchXplorer does not work anymore after updating to the official Mango, though my phone is still unlocked. This XAP will definitely helps if new firmware/updates come along to deploy Provxml to /windows.
I've installed it but how can I verify if this is being installed/copied to /windows?
GoingInside said:
My TouchXplorer does not work anymore after updating to the official Mango, though my phone is still unlocked. This XAP will definitely helps if new firmware/updates come along to deploy Provxml to /windows.
I've installed it but how can I verify if this is being installed/copied to /windows?
Click to expand...
Click to collapse
This app uses the same DLL as TouchXplorer, which means it doesn't work either (I wrote a number of apps using that DLL, including a backup tool, and none of them can see any files anymore). I'm not sure exactly what was changed, but yeah, they broke it. My hope is that Heathcliff74's WP7 Root Tools will restore file browsing on HTC soon.
As soon as I finish restoring my phone, I'll try writing a version of the app that uses ProvXML to copy the file, instead of ComFileRW.dll (which no longer works if you get the final HTC update). Using ProvXML is limited in some ways - you can't browse the filesystem, for example - but it works great for this type of operation.
i'm on force unlock from Ansar's thread with Pedbe way final mango.Been trying to use advancedconfig 1.3,1.4 battery meter it don't work anymore.Good thing I can sideload(that's important)
GoodDayToDie said:
This app uses the same DLL as TouchXplorer, which means it doesn't work either (I wrote a number of apps using that DLL, including a backup tool, and none of them can see any files anymore). I'm not sure exactly what was changed, but yeah, they broke it. My hope is that Heathcliff74's WP7 Root Tools will restore file browsing on HTC soon.
As soon as I finish restoring my phone, I'll try writing a version of the app that uses ProvXML to copy the file, instead of ComFileRW.dll (which no longer works if you get the final HTC update). Using ProvXML is limited in some ways - you can't browse the filesystem, for example - but it works great for this type of operation.
Click to expand...
Click to collapse
Ok, guess I'll have to wait for the experts (Heathcliff74 and you etc) to solve this HTC drive update issue. Thank you!
GoingInside said:
Ok, guess I'll have to wait for the experts (Heathcliff74 and you etc) to solve this HTC drive update issue. Thank you!
Click to expand...
Click to collapse
@GoingInside, and anybody else in the same boat (latest HTC update installed, filesystem browsing broken), please try the latest version (v2, now on the initial post)! After running the app once, run Connection Setup and hit OK. After you do that, use a Registry Editor to check for the presence of the following registry key: HKCU\Software\DeployProvXML.
Please report whether that key is present. If it is, that means the app is fully functional even with the latest update!
I only have a NoDo Backup (my phone came with nodo) - can I get the interop unlock trough dev unlocking the phone and then running our app?
nvm, I am now downgrading to NoDo and Will then update to the HTC RTM (the one that Comes via zune). As soon as I am there I will tell you if i had luck with it or not (I hope I can interopunlock on NoDo as the 3 apps sideloadlimit is crap)
Update 1: I am on NoDo and I started your app. It cloesd, i went to Connection Setup and ran it. Will check if the registry value is there as soon as some XAPs are deployed (first time that I can deploy more than 3 XAPs )
Update 2: Now going trough the Beta - RTM - HTC Update Update marathon. Will Report back as soon as I am on HTC's RTM
GoodDayToDie said:
@GoingInside, and anybody else in the same boat (latest HTC update installed, filesystem browsing broken), please try the latest version (v2, now on the initial post)! After running the app once, run Connection Setup and hit OK. After you do that, use a Registry Editor to check for the presence of the following registry key: HKCU\Software\DeployProvXML.
Please report whether that key is present. If it is, that means the app is fully functional even with the latest update!
Click to expand...
Click to collapse
Unfortunately, it seems that the new XAP (v2) doesn't work as well. Copy and deploy the latest DeployProvXML.xap (dated 5/10/2011) to my HTC trophy. After running Connection Setup, I can't find the registry key: HKCU\Software\DeployProvXML. I only found MICROSOFT under HKCU/Software/.
But please continue your research into this. THANKS!
Can someone please simplify all this for me?
The information on this site is so convoluded in terms of methods, some expired , some still valid, and guesses that are plain wrong, and irrelevancies.
I have been reading, installing, and uninstalling for hours into days.
Samsung Focus
1. Can Mango unlock be achieved with unlock from 7004?
2.I was on NoDo unlock and followed some instructions for the Focus that did not work. It went right to Mango LOCKED (as many others have reported).
I made a nice little back up of my NoDo unlock but can't get back to it using any version of Zune or any method, they all result in restore errors.
My back up might as well be on the north pole because I can't get to it.
3.I flashed back to 7004 and couldn't get chevron to unlock again like I used to be able to on XP or WIN 7 with various zune versions back to 4.7.
I'm wondering if the newer Zunes corrupted that somehow because last time it worked was on a fresh zune install on windows 7.
And besides that, they all ask to be upgraded before they do a back up, usually.
4.But even if it is unlocked at ROM 7004, zune updates (if chosen) will send it back to mango and locks it agian right? That's what happened last time , it just kept updating the phone for hours and then it was back to mango.
5.It appears my only option now is Mango locked or 7004 flash Rom with possible unlock.
Hopefully answers here will help others as well.
A few answers, though not compreheensive:
1) You don't have to let WP7 install each update, if you wanted to stop at, for example, NoDo 7392, you could. Just wait untilt he update gets that far, then pull the plug and/or hit Ccancel in Zune. Left to itsself, it will install all available updates.
2) The phone automatically dev-relocks whenever a major update is installed - this happens even to people with legitimate develop-unlock (and it's annoying!) For Samsung, I believe the technique for preserving unlock is the same one used to get interop-unlock on Mango: place an unlock provxml file in \provxml\ on the phone's filesystem (you can either use Heathcliff74's WP7 Root Tools to do this, or you can just install his interop-unlock XAP) and make sure you have a working version of the Samsung Diag app (should allow you to process provxml files). Once you have that, you can install all the way up to the Mango update safely, I think (I don't have a Samsung, but it should work) and use the Diag app to process your provxml file, which will both dev-unlock and interop-unlock the phone.
Not sure what's up with your backups; I can't really help you there without more information. What error do you get? What version of Zune are you using (you probably should use the latest version, 4.8.whatever)? How big is the backup (it's in %localappdata%\Microsoft\Windows Phone Update\)?
As for what guides to follow, starting with the stickies is always a good idea.
Hello,
I have a HTC Mozart device wich is momentarily running on unlocked NoDo.
I have followed various guides from xda but I end up running a locked Mango (most of the guides require after Mango update to run HTC Connection Setup to unlock... which I am unable to run (black scren) and all other apps tell me revoked by Microsoft).
is there any latest guide a little more foolproof?
It seems that after 18th October something happened with Zune which prevents Mango unlock...
Gyuritzy said:
Hello,
I have a HTC Mozart device wich is momentarily running on unlocked NoDo.
I have followed various guides from xda but I end up running a locked Mango (most of the guides require after Mango update to run HTC Connection Setup to unlock... which I am unable to run (black scren) and all other apps tell me revoked by Microsoft).
is there any latest guide a little more foolproof?
It seems that after 18th October something happened with Zune which prevents Mango unlock...
Click to expand...
Click to collapse
After you install the interop-unlock xap while on nodo then goto mango you reinstall the diag app and in the Diagnosis app dial: *#9908#.. Select "Heathcliff74 Interop Unlock"
then tap Save, tap Close and exit the Diagnosis app
@lucasryan: Those are the instructions for a Samsung phone. They don't work at all on an HTC phone.
@Gyuritzy: Currently, Microsoft is pushing the Mango update and an HTC update together. The HTC update blocks the unlock path used with Mango. If your phone gets that update - which means if it gets Mango through the retail update path - there's no current way to interop-unlock it.
If you can get Mango through an atypical upgrade path (I came from the beta, which worked), or if you use a custom ROM (be *very careful* of the bootloader version if you try this!!), you can get interoop-unlocked Mango on HTC. It's not easy, though.
Ahh i see that i quoted his post now. as alan93 has focus
What solution do I have to load Mango without HTC update? Should I try with RCT2RTM type of packagge?
@GoodDayToDie
#1 - ahh ok, but I'm sure watching the update tentativley is required right? For like an hour and a half.
#2 - now see, there you go again, this is only for dev-unlock people which , i'm not even sure what that is..what? you pay $100 to MS to get it? It needs to be stated more clearly where ever that solution is posted AT THE VERY TOP like this "IF YOU ALREADY HAVE A DEV UNLOCK ....
@ lucasryan - That can't be right, -->"installing interop unlock on NoDo then go to Mango"...STOP RIGHT THERE. when you go to Mango it wipes everything out and you have no more access...unless of course ..YOU ALREADY HAVE A DEV UNLOCK...what ever that is.
I did try the diagnosis trick on update to mango after putting that file on there but the diagnosis version would not go higher than 908 or what ever. Couldn't get 1112 or what ever the one that is needed.
Please, just say there is no way to unlock Mango unless you have a dev unlock and that is low percentage as it is...then I won't expect so much.
Thanks for the replies.
Here is the zune error I get on trying to restore to my NoDo unlock.
http://answers.microsoft.com/en-us/...-restore/3ec7091d-d79d-422c-9995-cfe186e0155b
As you can see nobody is dying to answer it.
I think the code number means "this goon is trying to restore to an unlocked version, don't answer him".
@alan93: Developer Unlock is the term used for the change to your phone made by the Windows Phone Registration Tool (if you have a marketplace developer account), ChevronWP7 Unlocker (possible on pre-NoDo), ChevronWP7 Labs (coming soon), or changing the DeveloperUnlockState registry value located at HKLM\Comm\Security\LVMod to 1 (possible with the LG registry editor, or by using the Samsung diag app or HTC Connection Setup app to process to provxml file). The registry change is actually what matters; the other methods are simply ways to achieve it.
Dev unlock allows you to install XAP files - a renamed ZIP file with some manifest XML files, one or more managed (.NET-based) DLL files, and possibly other files needed by the application. Due to a bug in the application installer, you can also use a XAP to put arbitrary files almost anywhere in the filesystem (the installer can't write to the \Windows\ directory).
One of those manifst files specifies capabilities that the app has, which controls permissions of the app (for example, ID_CAP_ISV_CAMERA allows access to the public camera APIs). As of Mango, including beta versions, it is no longer possible to install apps with the ID_CAP_INTEROPSERVICES capability unless the MaxUnsignedApp registry value (located in HKLM\Software\Microsoft\DeviceReg\Install) is set to at least 300 (the default value is either 10 or 3, depending on the unlock method used). ID_CAP_INTEROPSERVICES is required for interfacing with drivers, a way for applications to run at high permissions (for example, to write to the registry). Each time you install a major upgrade, such as Mango, this value is reset to its default. An app with ID_CAP_INTEROPSERVICES therefore can't be installed (or run, if it was installed before upgrading to Mango) until this MaxUnsignedApp registry value is changed, a process referred to as Interop-unlock (term coined by Heathcliff74 on this forum). Marketplace-installed apps are exempt from this restriction, which is why things like Connection Setup (which has ID_CAP_INTEROPSERVICES) can be used.
For what it's worth, I got my dev-unlock by purchasing a marketplace developer account ($100 from MS). One day I may even submit an app to the marketplace, but so far all the apps I've written use homebrew and wouldn't be acceptable for the marketplace, so I just publish them here.
Thanks great explanation.
I intend to write my own too, I wrote one and have a few more great ideas but didn't want to pay until i made sure I was able to write them completely and testing on the simulator sux. And last I heard, the media player doesn't work with it.
I just think the fee and lockout just hurts development thereby limiting the success of WP7.
If it was $50 or less I would probably pay it.
I mean for crying out loud I'm a certified MCP/MCAD, they should give me a break here.