Develop Bugs

Best Case / Pouch for XDA EXEC / JASJAR / HTC UNIVERSAL

Hi All,
I can't decide which case to get for my XDA EXEC.
I would like to use it on my belt occasionaly, so one with a belt clip or loop would be preferred.
From your experiences, which case is the best to go for ?
Thanks.

The t-mobile 6315 case is the best I tried until now (my 3rd for the Universal). It is a holster type, as in, you carry it on your belt and take the Universal out to use it.
It is a surprisingly good fit, and it is very easy to take the device out and put it back in, at the same time, it is very safe when it is sitting on your belt.
The guy I bought it from at ebay has 2 left
http://cgi.ebay.com/NEW-HP-iPAQ-OEM...840044486QQcategoryZ15036QQrdZ1QQcmdZViewItem
And it costs you 1/4 of anything else you are going to buy out there.

Doesn't look like he ships to the UK though !

Does size matter?
atekant,
I looked up the dimensions of the iPAQ 6315 and compared them to the JasJar. Here they are:
iPAQ JasJar
118.872 mm 127.7 mm
74.93 mm 81 mm
18.542 mm 25 mm
So based on the demensions posted by HP and imate, the JasJar is larger than the 6315. Since I'm used to seeing demensions in inches/feet, I have no idea if these differences are significant. Do you find that the case is too small? Did you have to modify it? Because if not, I may end up purchasing one from www.casesonline.com, but get a slightly different color combo than the one you found on ebay. Thank you for any help.

This same guy has 52 under a different listing, very quick delivery BTW.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5771486213&category=15036#ebayphotohosting
weather, the fit is perfect, not tight and not loose, the Uni just goes in & out easily, yet the clip is tight on the belt. This is actually near identical to the HP case (larger one) selling for U$49 retail.

weatheryoko
I had the same questions when ordering it, and I was quite sure it would end up being too tight, but it is not tight at all.
The front, back, and the flip cover (with magnetic closure) is leather (I mean fake leather like substance, but not bad). The bottom, and the sides are elastic bands (about 1 inch wide) and have enough give to let the Universal slide in, and at the same time hold it tight enough.
You flip open the top and the case opens like a change purse would so you can slide your fingers in to grab the device.
I have stopped looking for a case for the Universal, that is how happy I am with it.

Thank you both....
Wow, that was a fast reply. Thank you. It sounds like I may the specific case that you bought (with the elastic bands on the side). So I might hold off on buying the one from casesonline. One last question..... Is there a slot to hold SD cards? Thanks again.

Has 2 slots. Go for it, best $12 I ever spent

I got mine yesterday. First when I open it, I felt as it seems it was made from not such a high quality material.
But when I try to use it, I was extremelly happy.
It was indeed made for the Universal! It fits very well, and very comfortable to put in the Universal and take it out. The belt clip is very nice as well. Finally, I reach the point where I can stop hunting for a perfect case for my Universal. I have tried few before: the original case that I modified with a belt clip, the metal case, and a PDA keyboard case. And this one is the best and I'm going to use it with my Universal from this point forward.
I feel upset with imate or HTC though, if they can sell a device with $1000 price, they should be able to include such a perfect case that only cost $5.
I guess this case is just perfectly made for Universal.

Some pictures of this case
Here are some pictures of my Universal case for the benefits of all of you. Like I said, it simply fits the Universal nicely. Look at the bottom cut, this allows you to take out the Universal easily. And I have no more problem with the stylus flying out when pulling the Universal out of the case (the problem with the original Universal case). Best value for the price ($5 plus tax and shipping, around $14) that you can get.

Does it have a belt clip or a belt loop? You missed taking a picture of the back. Please.

Hi,
strange that there is - still - no separate "carrying case" with a holster available for the i-mate JASJAR / Qtek 9000 other than cases offering complete insertion of the device thus being forced also to work with the device inserted.
Good news:
Expansys will be offering one, watch out here
http://www.expansys.com/product.asp?code=125516
Bad news:
It is EUR 53 here in Europe, which is quite a lot :-(
Second: Expansys is not really renowned for keeping the price it announces before availability of product, neither do they keep dates of delivery. (This product was first announced as "available before Christmas", then 23 Dec., then 2 Jan., now 6 Jan. in Europe, which is a public holiday in many countries here...)
Expansys says the manufacturer is "Premier Systems", though Google does not seem to know a manufacturer under this name.
Obviously this is just some fantasy brand producing for Expansys ???
Does anyone know who is producing this case or hides behind "Premier Systems" ?
(Strange enough that none of the big case manufacturers: Covertec, Krusell, ... offers such a case for the device.)
As my last PDA was an iPAQ 4700, for which I purchased the original holster case, I tried it out for my Qtek 9000 (identical with the im-mat JASJAR).
Almost fits perfectly
(Bad: Now my iPAQ, which is still a cute device, however lacking GSM connectivity, is "naked"...)
The 6315 is similar in size to the hx4700 afair, though I never saw the case one guy described here (attached photos a few posts downwards).

Ok, there we go. The back of the case.
Its a belt clip, not a loop. Very comfortable, its not moving around, not too lose, not too tight, just perfect.
Originally I was thinking to buy that XaX case as well, but its too expensive ($50?) and there is an opening on top intended for the headphone, but I dun like it considering if there is a rain drop into it, that's it.

Ok, there we go. The back of the case.
Its a belt clip, not a loop. Very comfortable, its not moving around, not too lose, not too tight, just perfect.
Originally I was thinking to buy that XaX case as well, but its too expensive ($50?) and there is an opening on top intended for the headphone, but I dun like it considering if there is a rain drop into it, that's it.

Thanks very much for the pictures.

Piel Frama - sweet!
my piel frama case just arrived in the mail today - very nice!! it retails for around €60 - or you can buy it brand-new on ebay for €40like i did
here's the link, i'll see if i can attach some pics as well!
http://cgi.ebay.de/Piel-Frama-Leder...841638524QQcategoryZ38994QQrdZ1QQcmdZViewItem
merry christmas
dennis

and here's another picture - this case covers the keyboard (on my old psion a few of the keys were rubbed blank from usage, and i've seen that problem reported on mda III's as well. plus you can leave the device in the case while using all t's features! :lol:

Hi all, does anyone know where to get T-Mobile case in Europe?
Thanks

t-mobile case
@stric
if you are talking about the case that came with the original mda profrom t-mobile, you can have mine, if you cover s&h! let me know if you're interested!
merry christmas
dennis

Hi, no I ment the case for HP 6340 which is being sold on ebay (but only in USA ). Thanks anyway.
Marry christmas and happy new year to all of you

Case Recommendations

Hi,
What case do people recommend to keep their Orbit safe? I'm stuck between the Krussell (which I have protected phones with before) , a silicon case (ebay item number 160068404562) or PDA Leather Flip Case (ebay 160068463414).
I'm tempted for the silicon as you still have easy access to the screen , but welcome any other ideas.

gavinlew said:
I'm tempted for the silicon as you still have easy access to the screen , but welcome any other ideas.
Click to expand...
Click to collapse
Before reading your question, I was not aware of the existance of a silicon case for this model. Now I've looked it up at Ebay and am also interested. A couple of months ago I bought a silicon case for my mp3 player (different brand though, ZCover) and am very pleased with it. So far however, the seller seems only to ship within the UK. I have just asked him by email if he is able to ship abroad, no answer yet.
Update: he does sell abroad. Apparently he has more than one item on Ebay, all about this case but with different shipping methods. Anyway, I just ordered a black silicon case, due to arrive later this week. I will let you know.

hi
i have the PDAIR flip case and am very pleased with it. i prefer it to a silicon type as it gives the screen more protection.

I agree that a flip case does give more protection, especially to the screen, but isn't it annoying when actually making a call? I presume you don't take the phone out of the case before calling. To me it looks rather silly. NOFI.

Have a look for the aluminium (on ebay, under artemis/p3300) case for the artemis as I have just ordered one and hope it is a good fit for the orbit?

Not massively protective but the slipcase supplied with the 8oGB ipod is a perfect fit. I'm using it just now to avoid scratches until i find a good screen protector and silicon case.

JC#79 said:
Have a look for the aluminium (on ebay, under artemis/p3300) case for the artemis as I have just ordered one and hope it is a good fit for the orbit?
Click to expand...
Click to collapse
has your aluminiun case arrived, How much extra bulk does it add, as I'm thinking of getting one. I already have a black silicone case which is very good, and a very tight snug fit, but no protection for the screen. If the aluminium one is not to big, then I would sell my silicone case.

Yes my aluminium case came through the same day as my last post and it does not add much bulk to the device. The only issue I have had with it is the stylus is covered slightly so to remove it you have to open the case and slide the phone up slightly. Apart from that great case would recommend highly to all those in need of a case. My case came in a Pdair box so I assume it is made by them?

I also have the leather PDAIR flip case and my only criticism is that it extends a little to much toward the sides of the base of the screen so that I must angle the stylus a bit at the edges.

mungosdad said:
I already have a black silicone case which is very good, and a very tight snug fit, but no protection for the screen. If the aluminium one is not to big, then I would sell my silicone case.
Click to expand...
Click to collapse
I just had a look at the aluminium cases sold on Ebay but they don't seem to have protection for the screen as well? How is that different then?
Just like you, I ordered a silicon case last week and it arrived a couple of days later. I'm pleased with it, pretty tight fit, better grip, no chance anymore of scratching the camera lens when the phone is on it's back, and all the required openings are exactly on the right spot. Indeed, the only thing left is the absence of protection for the screen, but I don't carry the phone in a pocket together with keys or coins.

The aluminium case has a plastic screen in it to protect the orbit. You have to open the front cover to use the touch screen.
All of which is not a problem as I would advise anyone with a phone of this quality to purchase a screen protector ASAP.
I didn't use my orbit till my protector came through the post.

Hi All
I spoke to the lady in the O2 shop in Swindon about cases, she said that O2 will be releasing some Orbit specific ones in the next couple of weeks.
I have my fingers crossed.
Rich

JC#79 said:
I didn't use my orbit till my protector came through the post.
Click to expand...
Click to collapse
The slightly scratched, fingerprint smeared and dusty state of my just-over-a-week-old Orbit screen would probably give you a heart attack then! Screen protectors don't come cheap, £10 for little sheets of sticky plastic... selotape is under £1 a roll! I'll just use some of that!

Has anyone on their internet travels come across a vertical leather pouch/holster for the Artemis that has a belt clip?
Something like this:
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=21740
Just want something that can be attached to a belt and the Artemis slid into and out of - not for use in the actual case.
Must be vertical and minimal size (ie designed for the Artemis and no larger).

Krusell Vertica with Multidapt® - S-Wide

Selotape aside I'll almost certainly be going for http://www.pielframa.net/pielframa_productos.asp?id=1685 (mentioned on the other case thread) if I ever bother getting a case... can't beat something made-to-measure!

Just got myself a Piel Farama in black for my Jasjam. Looks very good and high quality but certainly requires getting a bit used to as each time you have to open the flap and fold it all the way back to get a hold of the device to take or make a call.
regards

Thanks Moleshome - that is exactly what I am looking for except my only concern (as with all "multi" cases) is that it will not fit it nicely and/or be the smallest possible case for the dimensions of the p3300. I can't think it fits all of the listed "compatible" models perfectly and I don't know if the Artemis would be in that category.
Anyone bought this particular case? Experiences?

Got my Piel Frama case today - it fits the Orbit well despite being designed for the P3300 (sharper corners).
Overall a beautifully crafted case which I will probably return as it won't let me store a credit card in the flap. My last case for the XDA Mini was a Krusell - hope they bring out an Orbit sepcific case soon....

strongp said:
Overall a beautifully crafted case which I will probably return as it won't let me store a credit card in the flap. My last case for the XDA Mini was a Krusell - hope they bring out an Orbit sepcific case soon....
Click to expand...
Click to collapse
No good for spontanous gprs internet shopping on the go then?
I dropped an email to see if I could get one for review, fingers crossed otherwise I'll have to fork over some mulah or see what my birthday holds. (I've been a games/tech journalist for a while, which is nice)
Would be interesting to get a comparison of the Krusell and Piel cases, and maybe something a bit more on the minimalistic size. I'll see what I can do, but neither are contacts I've dealt with before.

Samsung official flip case

I want to get the samsung flip case that covers the screen. It was being included for free with the order from some retailers.
Can it be purchased separately?
Thanks for any feedback.

apascual89 said:
I want to get the samsung flip case that covers the screen. It was being included for free with the order from some retailers.
Can it be purchased separately?
Thanks for any feedback.
Click to expand...
Click to collapse
Yes. I got mine at Handtec UK.

i bought mine on ebay. but it seems the price has hiked up a fair bit now.

please don't bother with buying it, the build quality is terrible, and it peels off after a few weeks of use. definitely not worth what it's selling for

Got mine on ebay for $45 shipped. I actually like it as I can fold it back to fit in my car dock quite easily.
It's integrated into a backplate that's slightly raised so it protects the Camera from scratches.

Thanks for the replies. I ordered it from mobile fun uk.

jeremy.chan said:
please don't bother with buying it, the build quality is terrible, and it peels off after a few weeks of use. definitely not worth what it's selling for
Click to expand...
Click to collapse
I've had no problems with mine. I have abused it also by puttiing it into tight desk and car docks which scrape the sides. It is still in great shape.

Mine is doing fine too.. No problem with quality

Low quality
I'd agree about the low quality comment.
The line along the edges started to peel off first, and now the actual cover is starting to peel.
Fortunately, I'm expecting my easecase soon, so, I'm hoping it survives another week or two, and, I hope the easecase is as good as others have indicated it is.

The most annoying thing about this case is it's actually not for sale (mine had a sticker that said "not for resale"). They are given free in some countries where Notes are purchased.
eBayers are making a fortune on this free item. Capitalism at it's finest but oh well.

jeremy.chan said:
please don't bother with buying it, the build quality is terrible, and it peels off after a few weeks of use. definitely not worth what it's selling for
Click to expand...
Click to collapse
Too true, although I like the idea of the flip case, mine starting peeling off after a couple of weeks.

Also mine started peeling off inspite my intensive care

I got mine with the phone. After 2 months it's still ok.

I think that a flip case that does not need to change the phone back might be better for those like me who are used to connect it to the car dock often, to get the latest traffic info. Even if it might be possible to hook the phone-case combo into the dock, nevertheless it seems to put strain on the micro USB connector, which might being damage in time.
Ernesto de Bernardis
[from my Galaxy Note]

I have the flip case and I have to say it made the whole experience of carrying the note much better .it is better than other cases because it does not add bulk.
Sent from my GT-N7000 using xda premium

Sad to hear that it's such bad quality. I am using mine for a week now (Netherlands) and no problems yet. Lovin it! Also bought the Brodit Carkit but as people mentioned, won't fit with flip case :-(
So decided to put the normal back cover on and buy a pouch (Going to try a neoprene for now).

German purchasers of the Note can get it for free now under https://samsung.de/de/microsites/galaxynote_flipcover/Default.aspx

Case Question

Just sold my G Tab 10.1 and picked a 10.1 Note. I've been searching through this forum with no luck so thought I'd ask. Does anyone, hooefully Samsung make a book cover case that is the same as the Tab case? All I have seen is the magnetic book cover but it just lays on the screen. The samsung case I had for my Tab was magnetic as well but had a flap on it that folded over and held it all together.
Sent From a far away Galaxy, in Missouri.

The Apostle said:
Just sold my G Tab 10.1 and picked a 10.1 Note. I've been searching through this forum with no luck so thought I'd ask. Does anyone, hooefully Samsung make a book cover case that is the same as the Tab case? All I have seen is the magnetic book cover but it just lays on the screen. The samsung case I had for my Tab was magnetic as well but had a flap on it that folded over and held it all together.
Sent From a far away Galaxy, in Missouri.
Click to expand...
Click to collapse
Your correct there is a Galaxy Note 10.1 Magnetic Book Cover, Gray. http://www.samsung.com/us/mobile/galaxy-tab-accessories/EFC-1G2NGEGSTA
http://www.youtube.com/watch?v=ijrpRzV7V3U
Watch video ... your right no magnet on the front only on the back. This could be due to the fact that magnets can cause the S Pen function to go screwy, so your better off without magnets near the screen.
.

I have that case. I'm actually looking for one just like I hsd on my GTab. Their is a magnetic "clasp" that holds it together. Example here - http://reviews.us.samsung.com/7463/...-tab-10-1-book-cover-case-reviews/reviews.htm
Sent from my SCH-I535 using xda premium

There is one just like that for the Note 10.1, but it doesn't seem to be readily available in the states.
I saw an eBay listing for buying it from China a few days ago while case shopping, but I can't seem to find it again atm. I'll dig through my history and see if I can locate it.
Edit: search for "NEW Ultra Slim Case Cover For Samsung Galaxy Note 10.1 N8000 N8010 Black" on eBay (I'll pm a link) It's about $12
Also, I'm a long-term reader, but new poster so it won't let me post a link to the YouTube video that shows it until I've posted 10 times. Blargh.
YouTube "Samsung Galaxy Note 10.1 N8000 case" posted by SuperClement001
Sent from my EVO using xda app-developers app

Thanks for the info man
Sent from my GT-N8013 using XDA Premium HD app

Found it on amazon. Saw 3 colors... here is the black. http://www.amazon.com/Plastic-Cover...=8-1&keywords=new+ultra+slim+galaxy+note+10.1
Sent from my GT-N8013 using XDA Premium HD app

Even better!
I was considering ordering this one myself, but was iffy on the eBay order and wasn't sure about how heavy it was.
Did your version for the tab add a lot of weight?
P.S. I'm a she. STEPHiroth. I guess I should add an avitar....
Sent from my EVO using xda app-developers app

Just be careful with those cheap cases from ebay that look like the Samsung book cover (with no extra flap). They are knock-offs and the quality is horrible. There is no microfibre on the inside of the flap, just the same vinyl/plastic material as the outside. The magnets are too strong, so they interfere with the spen. The pen won't write within the 1 inch strip exactly on top of the magnets. You can also tell exactly where the magnets are by the sunken circular areas in the back part of the cover. The flap itself is very stiff and when you try to keep it closed it presses on the power button and causes restarts. I've bought one but I've requested a refund and I now have an original Samsung book cover on the way. It should arrive tomorrow.

This looks possibly promising. http://www.amazon.com/MoKo-Slim-Fit-Folio-Samsung-Galaxy/dp/B0088I9AX4/ref=pd_sim_e_2
___________________________________
Sent from the local NoTel MoTel

Lots of people linked that one as their favorite in the original, now 50 pages long, case thread. (Worth reading through to get people's opinions on practically every case that has come out.)
The only downside I see is the clip on the front could get in the way if you wanted to use a BT keyboard on the case or if you wanted to fold the case back and use it flat on a desk.
The plus side to the clip is there are no magnets, and it leaves the tablet at a nice angle for typing in landscape mode.
Sent from my EVO using xda app-developers app

stephiroth said:
Lots of people linked that one as their favorite in the original, now 50 pages long, case thread. (Worth reading through to get people's opinions on practically every case that has come out.)
The only downside I see is the clip on the front could get in the way if you wanted to use a BT keyboard on the case or if you wanted to fold the case back and use it flat on a desk.
The plus side to the clip is there are no magnets, and it leaves the tablet at a nice angle for typing in landscape mode.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Wow, i like this. but i dont understand why all the samsung made stuff has the fold on the wrong side. when holding like a book, the power button is in a very awkward position. Nearly every 3rd party case flips the device so the power button is in the top right not lower left. I reach for that more than my S pen.
Does anyone have httpFolio Stand Hard Case This case? im leary on an Ebay item i cant get anywhere else.... ie no reviews.
So im torn between This from Poetic or this from Moko. I typically dont like the leather on top of the edges look, but I like all other aspects. anyone have an opionion on either?
I dont mean to hijack the thread, but it seems relevant :angel:

Neflhiem said:
Wow, i like this. but i dont understand why all the samsung made stuff has the fold on the wrong side. when holding like a book, the power button is in a very awkward position. Nearly every 3rd party case flips the device so the power button is in the top right not lower left. I reach for that more than my S pen.
Does anyone have httpFolio Stand Hard Case This case? im leary on an Ebay item i cant get anywhere else.... ie no reviews.
So im torn between This from Poetic or this from Moko. I typically dont like the leather on top of the edges look, but I like all other aspects. anyone have an opionion on either?
I dont mean to hijack the thread, but it seems relevant :angel:
Click to expand...
Click to collapse
I'm pretty sure that eBay one is the same case that The Apostle linked to earlier via Amazon I think both may be knock offs, but either way they cover the charging port when closed. One of the 3 Amazon reviews says teh magnets interfere. YMMV.
As for the ones you linked. I've just finished reading the Cases thread and possibly every review for all the Note10.1 cases on Amazon in my search for a perfect case, so I'll share what reviewers have summarized about them:
The MoKo has an elastic closure and pen loop that the Poetic doesn't have.
It also has a nice open spen slot (at the expense of leaving that corner unprotected from a drop.)
It leaves all ports uncovered and you can charge while it's closed.
Weight: 9oz
The Poetic has more card slots and a magnetic closure (which can supposedly sometimes interfere with the spen)
It offers more coverage for the corner with the spen (which I like) at the expense of making it harder to remove.
It also covers the SD card slot with the case. (Which is no big deal if you leave it in, but if you swap them a lot to transfer camera photos like I do, you would have to remove it from the case.)
Weight: 9.9oz
The Poetic was crossed off my list (due to the blocked SD slot), but the MoKo is still on it even though I was hoping to find a case with an uncovered bezel.
Sent from my EVO

Poor case selection

I'm trying to find a case with a belt clip but I've only found one believe it or not. Searching Amazon I've found the same case rebranded a hundred times over.
Problem is, I bought one and it has a critical flaw. With the case on the phone, insert it into the slip holster (aka clamshell) and the railing of holster constantly pushes the power button, so every time I pull out the phone, it reboots! I though it was my phone at first. Anyway, all designs on Amazon are the same! Just overseas made and sold by differing names.
I checked eBay too
I have found some nice horizontal cases (with a flap) that I think will work but I'm feeling like I will never see a true clamshell or clip design for this device...
I don't pocket my phones at all. I find it ruins the finish and is uncomfortable to me.
Just a rant. Anyone know of a well built case that offers a belt clip. I'll pay the price for a quality case, gladly!
Sent from my ZTE A2017U using Tapatalk

A crazy idea that might work....
I had an idea! The Axon 7 measures 5.97 x 2.95 x .31 and the Google Pixel XL measures 6.09 x 2.98 x .33. With my TPU case on, I think if I purchase the Seidio spring clip holster this might just fit the bill. The side rails might be cutting it close, but I am willing to take the chance.

Edit: am dumb
Edit2: I was right, it has a belt holder: Case with holder

Boutchoo said:
Edit: am dumb
Edit2: I was right, it has a belt holder: Case with holder
Click to expand...
Click to collapse
I tried that one. It has a critical design flaw. When I put it into the belt holder, the belt holder pushes, and holds, the power button hard-rebooting my phone every time. I think the inner rubber phone case fits loosely which causes too much material over the power button. LOL Otherwise it isn't that bad of a combo.
Sent from my ZTE A2017U using Tapatalk

emtownsend said:
I tried that one. It has a critical design flaw. When I put it into the belt holder, the belt holder pushes, and holds, the power button hard-rebooting my phone every time. I think the inner rubber phone case fits loosely which causes too much material over the power button. LOL Otherwise it isn't that bad of a combo.
Click to expand...
Click to collapse
Amazon. Com

Received my Poetic Revolution series case for my A7 today. I am very impressed by it thus far, especially by the built-in screen protector since there are no full screen tempered glass protectors for the A7 due to the curved glass. I don't plan on tossing my phone around to test out the durability but it feels like it is going to offer some good protection all around.

Is there any flip cover case with sleep/lock function, like the original?
Couldn't find any, on ebay or EU amazons, except the original from US which costs 55 $ with postage to Europe...
Nillkin, who has such nice quality and economy cases, has not produced an Axon 7 case.
Any suggestions pleaseeee ?

I'm very happy with the one given in the box.
Envoyé de mon ZTE A2017G en utilisant Tapatalk

nek4d said:
Is there any flip cover case with sleep/lock function, like the original?
Couldn't find any, on ebay or EU amazons, except the original from US which costs 55 $ with postage to Europe...
Nillkin, who has such nice quality and economy cases, has not produced an Axon 7 case.
Any suggestions pleaseeee ?
Click to expand...
Click to collapse
You can buy the original from ZTE or B&H. Both dropped the price to 9.99 USD. B&H I know ships internationally-don't know about ZTE.
https://www.zteusa.com/products/accessories/
https://www.bhphotovideo.com/c/product/1297278-REG/zte_a2grcas_clear_view_folio_case.html

I just ordered this metal case.
https://www.amazon.com/gp/aw/d/B06XZ3PV82/ref=ya_st_dp_summary

borijess said:
I just ordered this metal case.
https://www.amazon.com/gp/aw/d/B06XZ3PV82/ref=ya_st_dp_summary
Click to expand...
Click to collapse
Please report back when you get it, as I'm very curious how it works with signal - every metal case I've ordered in the past for my other phones has reduced the signal slightly to significantly. I had thought the slightly wasn't a problem - what's a decrease of 1-2 bars when you're at full strength anyway?
The problem is when you're in a poor signal area and you NEED that 1 bar and you have to take the phone out of the case to work!
On another note, I wish that someone would make a simple backless bumper case - I miss those days when I could use my phone practically naked with just a protective bumper around the sides.

rEVOLVE said:
Please report back when you get it, as I'm very curious how it works with signal - every metal case I've ordered in the past for my other phones has reduced the signal slightly to significantly. I had thought the slightly wasn't a problem - what's a decrease of 1-2 bars when you're at full strength anyway?
The problem is when you're in a poor signal area and you NEED that 1 bar and you have to take the phone out of the case to work!
On another note, I wish that someone would make a simple backless bumper case - I miss those days when I could use my phone practically naked with just a protective bumper around the sides.
Click to expand...
Click to collapse
Just got the case today. I ordered a black one and i got a silver mirror looking back. I will be sending the case back. The back is plastic and it very reflective. The only metal is the bumper.

borijess said:
Just got the case today. I ordered a black one and i got a silver mirror looking back. I will be sending the case back. The back is plastic and it very reflective. The only metal is the bumper.
Click to expand...
Click to collapse
Ah, sorry to hear about that - I was hoping you had good news, but it seems not only did you not get what you wanted, but have to go through a bit of inconvenience to return the product. I appreciate that you shared your experience, though- thanks a lot for saving me from the same mistake.

I've using my poetic case for a few months now, and thus far I have a few complains
- flaps they remain open after a while, I cut them off both recently
- screen protector awful scratches easily, removed it and used a higher quality protector instead
now is near perfect the case plays well with third party screen protectors and is VERY sturdy, has saved me from QUITE a few drops

emtownsend said:
I'm trying to find a case with a belt clip but I've only found one believe it or not. Searching Amazon I've found the same case rebranded a hundred times over.
Problem is, I bought one and it has a critical flaw. With the case on the phone, insert it into the slip holster (aka clamshell) and the railing of holster constantly pushes the power button, so every time I pull out the phone, it reboots! I though it was my phone at first. Anyway, all designs on Amazon are the same! Just overseas made and sold by differing names.
I checked eBay too
I have found some nice horizontal cases (with a flap) that I think will work but I'm feeling like I will never see a true clamshell or clip design for this device...
I don't pocket my phones at all. I find it ruins the finish and is uncomfortable to me.
Just a rant. Anyone know of a well built case that offers a belt clip. I'll pay the price for a quality case, gladly!
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
I spent tons of time looking for cases for the Axon 7 and found that honestly there are 5 variants. The poetic tank case, the Spigen "rugged armor" case, the dual layer (rubber plus plastic) case thats rebranded by tons of companys, the "iron man" dual layer case (Also rebranded by various companies), and the belt clip one with terrible reviews because of the problem you stated. There are a few others that are some variation of the above or some see-through ones with bumpers but honestly none seemed satisfactory.
In light of this I decided to opt for ZTE's own hybrid material case. I haven't dropped the phone since I put it on but it is definitely sturdier than the case they included with the phone and the material is hard enough yet flexible enough that it seems like it would be able to take a hit without causing any damage to the phone. It also fits really well and is not bulky either. I realize this might not be what you're looking for but for some strange reason good quality cases are far and few between for this phone (perhaps due to some kind of licensing issue from ZTE?) so that case might be your best bet :/. You could potentially get some other kind of belt holster and have this phone sit in it while in the case.
Link for ZTE case: https://www.zteusa.com/axon7-co-mold-protective-case

Aluminum doom
Though this question was posed back in May , I didn't see a response answering the question so I'll answer it for you in case anyone else is curious . I purchased the Mirror case for $3.89 on eBay in piano black . ( I always seem to find better deals there and easier to navigate then the Big A but that's just my opinion). It is indeed a beautiful case and mine came in with no damage whatsoever . Indeed it is a tight fit putting the back on but once you get it in place everything does line up perfectly . The concern from another member was whether or not the signal would be blocked with the aluminum casing around the edges . The answer is a very easy yes . The signal degrades horribly . I only get two bars inside my home and with the case on it dropped to 0 with no signal whatsoever . It does get some signal outside but it's not worth using this case if I may be missing important calls or messages from clients . Sadly it's just a beautiful case with poor execution with the materials involved . Fortunately I didn't lose much on the case itself . I really wanted this one to work strictly because it looked so awesome even though it's not great when it comes to protecting the phone itself in a drop . Hope this helps if anyone else was curious about the case.
[=rEVOLVE;72176896]Please report back when you get it, as I'm very curious how it works with signal - every metal case I've ordered in the past for my other phones has reduced the signal slightly to significantly. I had thought the slightly wasn't a problem - what's a decrease of 1-2 bars when you're at full strength anyway?
The problem is when you're in a poor signal area and you NEED that 1 bar and you have to take the phone out of the case to work!
On another note, I wish that someone would make a simple backless bumper case - I miss those days when I could use my phone practically naked with just a protective bumper around the sides.[/QUOTE]