Related
Hey Guyz,
i unlocked by bootloader using fast boot method
then i rooted my phone using the same method and it was working fine.
Yesterday i installed CW rom and CWM autoinstaller , to reboot in recovery and installed a mod to bring reboot in Power Off menu options.. it intalled correctly.
But when i rebooted the phone, the sony ericcson logo appears again and again.. i.e it is stuck in boot loop.. m still able to enter in recovery but unable to boot my phone properly..
Please Help...
The First solution is to flash a stock firmware using flashtool.
But which Kernel and which Rom have you tried to flash?
Sent from my iPad using Tapatalk HD
k.. i'l try to flash 4.0.a.283 using fastboot..
BTW
I am noob.. Dont know anything about anything about kernel.. all i did was install Clock work rom.. When i opened it, it said, "you need to install CWM". So i installled CWM autoinstaller...
Now with everything installed, i booted into recovery and installed a mod ( which brings the option to reboot in Power Off menu). It installed correctly... Then i clicked on reboot system now.. That is when i realized that m stuck in boot loop..
hysenkoshy said:
k.. i'l try to flash 4.0.a.283 using fastboot..
BTW
I am noob.. Dont know anything about anything about kernel.. all i did was install Clock work rom.. When i opened it, it said, "you need to install CWM". So i installled CWM autoinstaller...
Now with everything installed, i booted into recovery and installed a mod ( which brings the option to reboot in Power Off menu). It installed correctly... Then i clicked on reboot system now.. That is when i realized that m stuck in boot loop..
Click to expand...
Click to collapse
You must first check the compatibilty of "reboot mod" with the firmware version you use.
Just check the firmware you have in your phone and make sure it matches with the firmware on which the mod is based.
@wayne
I have flashed my phone using fastboot method just like i did it when i was rooting my phone. And Thank GOD it is working fine now..
@KingWecked,
M still trying to figure out, where did i go wrong at the first place...
was it the CWM auto installer ??
or was it the Reboot mod ?? coz i downloaded the mod for xperia arc only..
Do we need to change that kernel thing after rooting ??
I don't know what the hell is a kernel; and after rooting i haven't done anything with my kernel. Should i ???
A kernel is the base of what Android runs
Sent from my iPad 2 using Tapatalk
hysenkoshy said:
M still trying to figure out, where did i go wrong at the first place...
was it the CWM auto installer ??
or was it the Reboot mod ?? coz i downloaded the mod for xperia arc only..
Do we need to change that kernel thing after rooting ??
I don't know what the hell is a kernel; and after rooting i haven't done anything with my kernel. Should i ???
Click to expand...
Click to collapse
Before you install any mod,you must first check the firmware version you are using.You can find it out from Settings-->About Phone-->Build Number.
It contains the firmware version on which your phone is running Ex:4.0.a.283
.283 is the old version firmware and most of the mods dont work on this firmware.You must flash the latest firmware .42 in order to support the majority of the mods and themes available in this forum
And a kernel is very complicated thing.you must not mess with it unless you know what you are doing.Manipulating your kernel might brick your phone permanently.And if you want to know much further about kernels then search the forum and you must find loads of threads explaining about kernels and stuff related with it
@ KingWickedd
are u sure .283 is an old firmware
Coz initially i had "unrooted .62"
For rooting purpose i downloaded this firmware..
So can U please tell me where can i get " rooted 0.42 firmware" where i can start installing all mods right away..
Note: Multiupload links are not working ... Any other links ????
hysenkoshy said:
@ KingWickedd
are u sure .283 is an old firmware
Coz initially i had "unrooted .62"
For rooting purpose i downloaded this firmware..
So can U please tell me where can i get " rooted 0.42 firmware" where i can start installing all mods right away..
Note: Multiupload links are not working ... Any other links ????
Click to expand...
Click to collapse
Yes I am sure its the old version where as .42/.62/.69 are the latest firmware versions.They have almost everything in common and they differ based on the regions they are released in.
For rooted .42 firmware..follow this link below..
http://forum.xda-developers.com/showthread.php?t=1330314
Boot looooop
I am facing the same problem but the solutions given in here doesn't seem to work..please help me.
I had .42 rooted on my XPERIA ARC, unlocked bootloader.
Installed Cyanogenmod Stable version and flashed its boot.img.
Wiped the cache n data.
Installed the zip file after going into recovery mode but phone is stuck in BOOTLOOP...
When i try re-flashing .42 generic firmware using flashtool, PC hangs and i need to restart
Please help me out guys...
You need to flash kernel toooo
From my sexy LT15i
amulbaby said:
I am facing the same problem but the solutions given in here doesn't seem to work..please help me.
I had .42 rooted on my XPERIA ARC, unlocked bootloader.
Installed Cyanogenmod Stable version and flashed its boot.img.
Wiped the cache n data.
Installed the zip file after going into recovery mode but phone is stuck in BOOTLOOP...
When i try re-flashing .42 generic firmware using flashtool, PC hangs and i need to restart
Please help me out guys...
Click to expand...
Click to collapse
Don't worry...first start PC in safe mode first and then connect mobile in faatboot mode and wait for minute.. driver will install automatically..then restart PC in normal..then flash kernal in fast boot mode with recovery inbuilt..then flash rom.. it work for me in past..
Sent from my Xperia Arc using xda premium
hEY GUYS,
Thanks a lot...
What i did was...Flashed the kernal again...
Wiped Dalvik Cache...Rebooted into recovery...
Wiped Data n Cache partition...rebooted
And then re-installed the zip from SD card...
But now i wanna have a help reg. restoring of nandroid backup....
I had taken a nandroid backup using CWM Auto-installer...
But now I wanna know how can i restore my apps that i had with Stock ROM...i tried a advanced backup on /data alone but then, its not booting up if i do so...
Please help..
hallo good afternoon sir,
To the point of my problem..
what kernel must be use if i want to try SnapSeries_C.A.M.P_Zeus__V02FINAL_Signed_ideosdevzack
i follow step by step of OP and flash the kernel inside the rom package but my xperia play does not boot. I flash using fastboot n flashtool n got the same result
What kernel must be use? thanx u sir.
sorry..my english is bad.. i hope you understand what i mean. thx
The kernel is inside the build as stated in the instructions. Try open up the zip and find the kernel file.
Is your plays bootloader unlocked?
Sorry for my bad English. It's not my native language.
Xcited android user said:
Is your plays bootloader unlocked?
Sorry for my bad English. It's not my native language.
Click to expand...
Click to collapse
yes sir.. my play unlocked bootloader. now i am using ics markphyton with lupus kernel. i want to try P.A.C.Man but when flash kernel within rom package inside, my play not boot. just blank screen
i also try flash lupus kernel for jb v3 an got a same case,, can u help me sir, what must to do?
jeff7424 said:
The kernel is inside the build as stated in the instructions. Try open up the zip and find the kernel file.
Click to expand...
Click to collapse
i flash that kernel sir, kernel inside build. i open up with 7zip. i have to do step by step of OP instruction. but if i flash lupus kernel icsbeta v11, my play boot normaly.
sorry of my english sir.. its not my native language.
what about the firmware sir? i use firmware58
OK first remove kernel from extracted zip... Then re-zip rom. Flash kernel in fastboot... Boot into recovery using either Vol. Down or the back button... Depending on kernel. Once inside recovery. Clear data, cache, & dalvik. Once those are done... Install from sd.
Sent from my R800x
Lordomn said:
OK first remove kernel from extracted zip... Then re-zip rom. Flash kernel in fastboot... Boot into recovery using either Vol. Down or the back button... Depending on kernel. Once inside recovery. Clear data, cache, & dalvik. Once those are done... Install from sd.
Sent from my R800x
Click to expand...
Click to collapse
i can not boot into recovery (with press vol down or back button) screen are still black. i use fw62 now. no boot logo appears sir!
Going into recovery you have to continuously press back button when you boot phone... You should feel it vibrate.
Sent from my R800x
bootloop !!!
First, sorry for my bad english ( I'm french !!!)
I have a bootloop at the launcher chooser
I follow all the instructions correctly
I've got a Xperia Play root and unlocked bootloader
I see another have the same problem... is this a bug or I do something wrong ?
Check the zip. Make sure the files meta-inf & system are the first you see when you go into zip. If not you need to rezip to where the extra folder is gone.
Sent from my R800x
xperiandroid13 said:
i can not boot into recovery (with press vol down or back button) screen are still black. i use fw62 now. no boot logo appears sir!
Click to expand...
Click to collapse
Fw version will only make a difference to signal, data, battery ect, it still boots on other FW. Anyway to the point, do not use ics kernel bootlogo takes an extra couple of seconds to come on on JB kernel. Because u say u flashed lupus-isc-beta im assuming u know how to flash kernels. Ive probably flashed this over 50+ times since v2 with both flashboot (sdk) & flashtool. Did you try the kernel below the ROM Downloads??
And do click thanks to the users who have been helping you thats why its there
Calvelli said:
First, sorry for my bad english ( I'm french !!!)
I have a bootloop at the launcher chooser
I follow all the instructions correctly
I've got a Xperia Play root and unlocked bootloader
I see another have the same problem... is this a bug or I do something wrong ?
Click to expand...
Click to collapse
Im not sure what u mean "launcher chooser" its not a bug buddy 99.99999% user error. If you mean CWM then the only bug on that AFAIK is the screen jumping. If you cant boot at all try the pac kernel which is below the rom downloads
Sent from my GT-I9300 On Official JB
thanks for your answer !!!
wedgess said:
Fw version will only make a difference to signal, data, battery ect, it still boots on other FW. Anyway to the point, do not use ics kernel bootlogo takes an extra couple of seconds to come on on JB kernel. Because u say u flashed lupus-isc-beta im assuming u know how to flash kernels. Ive probably flashed this over 50+ times since v2 with both flashboot (sdk) & flashtool. Did you try the kernel below the ROM Downloads??
And do click thanks to the users who have been helping you thats why its there
Im not sure what u mean "launcher chooser" its not a bug buddy 99.99999% user error. If you mean CWM then the only bug on that AFAIK is the screen jumping. If you cant boot at all try the pac kernel which is below the rom downloads
Sent from my GT-I9300 On Official JB
Click to expand...
Click to collapse
I have an Xperia Play rooted and bootloader unlocked, I flash the boot into te zip file, and the rom (I follow the instuctions step by step)
when the phone reboot, I'm on the launcher chooser and the phone immediatly return to the bootlogo again and again... (I'm not the one with this problem !!!)
I want this rom (It's look awesome !!!)
... sorry, man for my very bad english...I'm french !!!
xperiandroid13 said:
hallo good afternoon sir,
To the point of my problem..
what kernel must be use if i want to try SnapSeries_C.A.M.P_Zeus__V02FINAL_Signed_ideosdevzack
i follow step by step of OP and flash the kernel inside the rom package but my xperia play does not boot. I flash using fastboot n flashtool n got the same result
What kernel must be use? thanx u sir.
sorry..my english is bad.. i hope you understand what i mean. thx
Click to expand...
Click to collapse
I have flashed kernal (not the kernal inside the package).....
I flashed FXP kernal included in Paranoid rom and flashed the CAMPS+ rom ....
And after that flashed Jbv3 kernal via fastboot and boot CAMPS+ rom....
But... but... no it gets booted till launcher selection & again gets booted and again same problem occurs....
It doesn't even stay on for 30 sec...
Till no solution found in any of threads...
anurag86 said:
I have flashed kernal (not the kernal inside the package).....
I flashed FXP kernal included in Paranoid rom and flashed the CAMPS+ rom ....
And after that flashed Jbv3 kernal via fastboot and boot CAMPS+ rom....
But... but... no it gets booted till launcher selection & again gets booted and again same problem occurs....
It doesn't even stay on for 30 sec...
Till no solution found in any of threads...
Click to expand...
Click to collapse
Think this problem happened to others using CAMP. Maybe try using my PACMan ROM its official and built specifically for Zeus and Zeusc from source plus working camera
Sent from my GT-I9300 On Official JB
Hey guys!
My Xperia Arc S is kinda new - 1 month old.
I was on Xperia Ultimade HD Rom for a while and wanted to install another rom, so i did via CWM Recovery.
All fine.
I wanted to restart my phone but it got stock in Sony Logo.
Because my bootloader cant be unlocked i rooted with kernel downgrade and CWM is not there after flashing due to the wipe.
So i flashed stock .tft with Flashtool and phone booted again.
Now when I'm trying to flash anything my phone gets always stuck in Sony Logo (even when i try Eagleboy's mode without wiping!).
Anyway: I'd like to install a custom rom.
Does anyone how to fix this?
Bootloader: Locked
Phone: LT18i
Rooted: yes
... and I have the 4.0.1.B.0.587 firmware installed right now.
Thanks in advance!
Phone Flashing problem
That's the only problem with locked bootloader's:crying:When you install some stock custom roms you have to wipe system to do a clean install which by default wipes cwm because it is installed in system for locked bootloader's.So if you have a problem with a install you have to flash another .ftf because you wiped cwm recovery.
When I first had arc I had a locked bootloader and it was a pain if something went wrong while flashinghaving to flash again etc! etc! It just got to stage where I had enough and took the plunge and unlocked the bootloader.:good:
I'm afraid it's one of those things you have to live with unless you unlock your bootloader:crying: ( I know you said you can't )there are quite a few stock roms that work but like I said if anything goes wrong you have to flash .ftf again.Probably a case of just trying each one Jader's rom alway's seemed to boot nice:good:
tallman43 said:
That's the only problem with locked bootloader's:crying:When you install some stock custom roms you have to wipe system to do a clean install which by default wipes cwm because it is installed in system for locked bootloader's.So if you have a problem with a install you have to flash another .ftf because you wiped cwm recovery.
When I first had arc I had a locked bootloader and it was a pain if something went wrong while flashinghaving to flash again etc! etc! It just got to stage where I had enough and took the plunge and unlocked the bootloader.:good:
I'm afraid it's one of those things you have to live with unless you unlock your bootloader:crying: ( I know you said you can't )there are quite a few stock roms that work but like I said if anything goes wrong you have to flash .ftf again.Probably a case of just trying each one Jader's rom alway's seemed to boot nice:good:
Click to expand...
Click to collapse
Hi, thanks for your answer
I tried to install 3 different roms till now - i wiped everything.
Then: Boot till sony-logo - I have to flash another tft with flashtool, Root again, and this takes time and is quite annoying.
I came from Samsung Galaxy S there wasn't the problem with the "bootloader" which is really annoying.
So: What should i do now?
I mean my CWM is not persistent and till now no rom worked.
Galaxy3User said:
Hi, thanks for your answer
I tried to install 3 different roms till now - i wiped everything.
Then: Boot till sony-logo - I have to flash another tft with flashtool, Root again, and this takes time and is quite annoying.
I came from Samsung Galaxy S there wasn't the problem with the "bootloader" which is really annoying.
So: What should i do now?
I mean my CWM is not persistent and till now no rom worked.
Click to expand...
Click to collapse
Hi totally agree it is frustrating!:crying: When you install some of these custom rom's they use Aroma installer are you unticking the reboot option in aroma installer and rebooting from cwm?Because you need to reboot that way (you seem to be doing everything right )
(1) Boot to cwm
(2) Wipe cache/Data/Advanced Dalvik cache
(3) Mounts & Storage format data/cache/system (NOTHING ELSE!)
(4) Install .zip on Sd card
(5) Choose options Aroma Installer
(6) Untick reboot option
(7) Reboot from cwm
tallman43 said:
Hi totally agree it is frustrating!:crying: When you install some of these custom rom's they use Aroma installer are you unticking the reboot option in aroma installer and rebooting from cwm?Because you need to reboot that way (you seem to be doing everything right )
(1) Boot to cwm
(2) Wipe cache/Data/Advanced Dalvik cache
(3) Mounts & Storage format data/cache/system (NOTHING ELSE!)
(4) Install .zip on Sd card
(5) Choose options Aroma Installer
(6) Untick reboot option
(7) Reboot from cwm
Click to expand...
Click to collapse
Yes i know , but thats what i did !
Wiped & formatting these settings and unticking reboot in aroma.
But it still doesn't work
Galaxy3User said:
Yes i know , but thats what i did !
Wiped & formatting these settings and unticking reboot in aroma.
But it still doesn't work
Click to expand...
Click to collapse
:crying:Like I said you seem to be doing everything rightHave you tried this rom http://forum.xda-developers.com/showthread.php?t=1994135 it's a two part installation but if I remember right this one seemed to install ok:good:
tallman43 said:
:crying:Like I said you seem to be doing everything rightHave you tried this rom http://forum.xda-developers.com/showthread.php?t=1994135 it's a two part installation but if I remember right this one seemed to install ok:good:
Click to expand...
Click to collapse
Haha i know. Thats why it seems strange for me too. But i need a custom rom and normally i would need a different kernel too.
But thats not possible. Sadly.
So nobody knows what i could change?
Galaxy3User said:
Haha i know. Thats why it seems strange for me too. But i need a custom rom and normally i would need a different kernel too.
But thats not possible. Sadly.
So nobody knows what i could change?
Click to expand...
Click to collapse
Only other thing you could try is changing your base firmware/ftf I notice you are using .587 base ftf try changing to another one, although Some of the custom roms recommend that firmware
Maybe someone else as any ideas
Απ: Flashing problem
If you accidentally formatted system then you removed the cwm. Try flashing the official ftf, install x-parts and redo everything without wiping system partition.
The other choice is to unlock your bootloader and you'll never face this problem again. I voided my warranty less a month after taking my phone, I knew that any problem will come up I could fix it myself
Sent from my Xperia Arc
Retrosid said:
If you accidentally formatted system then you removed the cwm. Try flashing the official ftf, install x-parts and redo everything without wiping system partition.
The other choice is to unlock your bootloader and you'll never face this problem again. I voided my warranty less a month after taking my phone, I knew that any problem will come up I could fix it myself
Sent from my Xperia Arc
Click to expand...
Click to collapse
Yep sure - but my CWM is gone when i wipe data. And I tried this: I flashed stock .ftf and installed xparts, then flashed a ROM without wipe - but doesn't boot and I cant access CWM again :/
And as I said i can't unlock my bootloader.
.. But the strange thing is just:
I even get bootloop when I install EAGLEBOYYS MOD (!) without WIPING anything! (just the recommended for sure)
That should not happen.
Why can't you unlock bootloader? Doing that would solve most of the problems you are facing. You don't have to downgrade to re root. Flash the stock kernel, install a new recovery then try again.
Sent from my Xperia Arc S using xda premium
If I go in service menu it says: Bootloader Unlock Allowed: No !
If I flash stock .ftf root is gone (?) -- RootChecker says that root is gone too.
Galaxy3User said:
Yep sure - but my CWM is gone when i wipe data. And I tried this: I flashed stock .ftf and installed xparts, then flashed a ROM without wipe - but doesn't boot and I cant access CWM again :/
And as I said i can't unlock my bootloader.
Click to expand...
Click to collapse
Galaxy3User said:
If I go in service menu it says: Bootloader Unlock Allowed: No !
If I flash stock .ftf root is gone (?) -- RootChecker says that root is gone too.
Click to expand...
Click to collapse
First of all - this thread: http://forum.xda-developers.com/showthread.php?t=1683957
I advice you to take step by step STRICTLY.
Or you can try to root with the FlashTool but I'm not sure if it will work with locked BL.
After that: http://forum.xda-developers.com/showthread.php?t=1955248
And for additional info: http://forum.xda-developers.com/showthread.php?t=1955248
TopperBG said:
First of all - this thread: http://forum.xda-developers.com/showthread.php?t=1683957
I advice you to take step by step STRICTLY.
Or you can try to root with the FlashTool but I'm not sure if it will work with locked BL.
After that: http://forum.xda-developers.com/showthread.php?t=1955248
And for additional info: http://forum.xda-developers.com/showthread.php?t=1955248
Click to expand...
Click to collapse
Thats how i rooted my Arc S!
Thats the only method that is working with locked BL.
And well, i took all the steps mentioned in the second topic you posted..
If you can't get it to work (stuck on Sony logo), then flash this in flash tool and then root again and do it one more time.
It´s ICS and kernel for Arc S but works fine on regular Arc. I use it myself on my Arc.
http://www.mediafire.com/?r0anos8emtx4iiy password is MMAS (If asked for)
Good luck and have fun with your superfast Arc with Ultimate HD™ ROM 2.0.
Click to expand...
Click to collapse
And this download link doesnt work :/
Galaxy3User said:
Thats how i rooted my Arc S!
Thats the only method that is working with locked BL.
And well, i took all the steps mentioned in the second topic you posted..
And this download link doesnt work :/
Click to expand...
Click to collapse
Here it is:
https://www.box.com/s/yu3dbp760kkyw7osoo41
https://www.box.com/s/9prbhnvkmyrglyoyl20j
TopperBG said:
Here it is:
https://www.box.com/s/yu3dbp760kkyw7osoo41
https://www.box.com/s/9prbhnvkmyrglyoyl20j
Click to expand...
Click to collapse
I flashed these files already after i got stuck at SONY logo but doesnt help..
Galaxy3User said:
I flashed these files already after i got stuck at SONY logo but doesnt help..
Click to expand...
Click to collapse
What does mean "doesnt help" ?
What are you trying to do and dont work, what is messages, what happens, did you have newest version of FlashTool, did you have installed ADB drivers, what's the error ?
TopperBG said:
What does mean "doesnt help" ?
What are you trying to do and dont work, what is messages, what happens,
did you have newest version of FlashTool, did you have installed ADB drivers,
what's the error ?
Click to expand...
Click to collapse
I mean when i flash this .ftf and reroot and install CWM all works fine.
But when I try to flash any ROM and doing all wipes etc. correctly it still gets stuck at SONY logo!
I have newest version of flashtool and ADB drivers installed. In flashtool there is no error.
Galaxy3User said:
I mean when i flash this .ftf and reroot and install CWM all works fine.
But when I try to flash any ROM and doing all wipes etc. correctly it still gets stuck at SONY logo!
I have newest version of flashtool and ADB drivers installed. In flashtool there is no error.
Click to expand...
Click to collapse
Which ROM are you trying to flash?
Is that ROM for locked BL ?
Hey guys so I'm in boot loop. Yes I know there are many guides all over saying how to fix it but I have tried many of them and they didnt work.
What happens is I start the phone, it shows the boot image and then restarts after a time.
I can boot into the Recovery mode by spamming the back button when the Logo comes. And can install zip files from the SD card.
I also have tried flashtool to restore it to stock but when i try flashing it detects my device "Device connected in flash mode" but when i try toflash it, it gives an error "Error flashing. Aborted".
I tried many many room whit kernels but stuck on bootloop every time, no way. I have never seen this problem before. Maybe bricked bootloader ?
I tried to relock the bootloader but doesnt help either.
Any help?
Ok, since you can boot into recovery can you flash you ROM.zip and try to boot into ROM? I also need some details:
- ROM you were using
- Kernel you were using
- How you got bootloop
Flashtool should work, try to recover using flashtool.
僕のLT18iから送られてきた
popthosegaskets said:
Ok, since you can boot into recovery can you flash you ROM.zip and try to boot into ROM? I also need some details:
- ROM you were using
- Kernel you were using
- How you got bootloop
Flashtool should work, try to recover using flashtool.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Before this happened i was using Ultimate HD 4.0 and Vengeance kernel ayame. The telephone was crashed and i didnt any backup. I tried to upgrade it to android 4.2 or 4.1 and the probleme begin I relocked the bootloader but doesnt help. I flashed it but doesnt accept any firmware, show Error flash bla bla bla Flash aborted. tried almost roms and kernels but doesnt help. I can install rooms and flash kernels, and boot up to recovery but after that is just stuck on boot animation or bootloop.:crying::crying::crying:
During the upgrade to JB, did you flash the kernel that came with it?
I assume you wanted to update to CM10/10.1? Vengeance Kernel is not compatible with JB. You need to flash UHD4 back to /system partition if you want to stick with UHD or flash the boot.img that came with the JB ROM.zip.
Do a clean install. Your phone should be working again if you do the steps correctly.
If you still have problems, you can reply to this thread or send me a PM if you wish to be more private about it.
Regards, 日焼けさん.
僕のLT18iから送られてきた
popthosega-skets said:
During the upgrade to JB, did you flash e ä'ökernel that came with it?
I assume you wanted to update to CM10/10.1? Vengeance Kernel is not compatible with JB. You need to flash UHD4 back to /system partition if you want to stick with UHD or flash the boot.img that came with the JB ROM.zip.
Do a clean install. Your phone should be working again if you do the steps correctly.
If you still have problems, you can reply to this thread or send me a PM if you wish to be more private about it.
Regards, 日焼けさん.9
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Thank you very much but i need steps . Plzz
Best regards
popthosegaskets said:
During the upgrade to JB, did you flash the kernel that came with it?
I assume you wanted to update to CM10/10.1? Vengeance Kernel is not compatible with JB. You need to flash UHD4 back to /system partition if you want to stick with UHD or flash the boot.img that came with the JB ROM.zip.
Do a clean install. Your phone should be working again if you do the steps correctly.
If you still have problems, you can reply to this thread or send me a PM if you wish to be more private about it.
Regards, 日焼けさん.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Sorry but i want tell you that the last i tried is this but doesnt help, stuck on boot animation. I gone be crazy.
OBS !!!!!! When i install rom and not working whit me i look on SD on pc if the installation files are there but nothing just the rom zip. I changed the SD but the same happened
Having issues realted to this one. Here's my device info. Hope it helps.
Device:
-> never been modded.
-> all stock rom.
-> stuck on a bootloop due to bluetooth.
It doesn't even have a recovery mod. So I'm pretty much stuck.
Can you help me out? And another thing, sorry for bringing this
old topic back. Haha.
i unlocked the bootloader . after that my xperia M c1904 just getting stuck on boot logo.
i tries many custom roms. kernals but result is same.
everytime its getting stuck on boot logo.
guys please help
chetan02012 said:
i unlocked the bootloader . after that my xperia M c1904 just getting stuck on boot logo.
i tries many custom roms. kernals but result is same.
everytime its getting stuck on boot logo.
guys please help
Click to expand...
Click to collapse
hmmm bro, i think you have a same problem with stuck in boot logo after unlock the bootloader right? just try to flash the stock rom with flashtool and check list the wipe data and cache in flashtool and after that flash it and wait. after boot up you can install any kernel for recovery mode and any custom rom for your development.
good kuck
Nicklas Van Dam said:
hmmm bro, i think you have a same problem with stuck in boot logo after unlock the bootloader right? just try to flash the stock rom with flashtool and check list the wipe data and cache in flashtool and after that flash it and wait. after boot up you can install any kernel for recovery mode and any custom rom for your development.
good kuck
Click to expand...
Click to collapse
Man ... tried that as well.. but no use..
chetan02012 said:
Man ... tried that as well.. but no use..
Click to expand...
Click to collapse
hmmm what software you used for unlock bootloader last time? i use a flashtool? if you use a flashtool to i think you can re flash again? or if you use a fastboot with pc command, you use this command right?
fastboot.exe -i 0x0fce getvar version
fastboot.exe -i 0x0fce oem unlock 0xKEY
right? have you change any kernel before unlock bootloader? i start to dizzy
Nicklas Van Dam said:
hmmm what software you used for unlock bootloader last time? i use a flashtool? if you use a flashtool to i think you can re flash again? or if you use a fastboot with pc command, you use this command right?
fastboot.exe -i 0x0fce getvar version
fastboot.exe -i 0x0fce oem unlock 0xKEY
right? have you change any kernel before unlock bootloader? i start to dizzy
Click to expand...
Click to collapse
I used the fastboot . followed the proper procedures from sony's official site.
nah i did not change the kernel before unlocking the bootloader.
anyhow, bootloader unlocking was ok. i was showing successful. even i tries2nd time as well. its same. still same problem. i tried almost all the custom roms from this forum and stock rom but result is same.
my brain is also freezed now.
i think is something comon
i Found this on the Unlocking bootloader tutorial http://forum.xda-developers.com/showthread.php?t=2484428
"When i unlocked my bootloader from above steps i first got a bootloop but after flashing My kernel ELIxER i recovered from bootloop and phone started well.
My apps and Data on internal SD were been WIPED so Do a backup first!"
hope i helped you
FinalbossMLG said:
i Found this on the Unlocking bootloader tutorial http://forum.xda-developers.com/showthread.php?t=2484428
"When i unlocked my bootloader from above steps i first got a bootloop but after flashing My kernel ELIxER i recovered from bootloop and phone started well.
My apps and Data on internal SD were been WIPED so Do a backup first!"
hope i helped you
Click to expand...
Click to collapse
so you think it's must change the kernel first? i still dizzy i just reflash it and it's okay again? change the kernel? with fastboot? but how about that kernel isn't compatible with that devices? can be hardbrick?
This may be the solution.
Hey brother,
Even i encountered that problem before, even i followed the same steps mentioned in the official sony site and was successful in wiping out my stock ROM and got stuck into the boot logo "SONY".
Then i tried to reset my phone using hard reset keys but didnt work.
i sincerely suggest you not to use flashtool.exe( which will open up CMD and u type series of codes ) .
Then i used Androxyde XPERIA Flashtool ( now new version is released) you can download from
here : http://www.xperiafirmware.com/compo...2-uncategorised/30-androxyde-xperia-flashtool
Download the .FTF file of your phone and connect your phone in Flashboot mode ( it may be volume down key , search for ur phone).
Then make sure you check Wipe data and cache partition and click the flash button.
I use Sony Xperia M Dual C2004. it worked for me and i am sure this will work for u too. if u have tested with this method and if it didnt work then i am so sorry i cant help u but trust me this will definitely work.:good::angel:
Sai Bhasker Raju said:
Hey brother,
Even i encountered that problem before, even i followed the same steps mentioned in the official sony site and was successful in wiping out my stock ROM and got stuck into the boot logo "SONY".
Then i tried to reset my phone using hard reset keys but didnt work.
i sincerely suggest you not to use flashtool.exe( which will open up CMD and u type series of codes ) .
Then i used Androxyde XPERIA Flashtool ( now new version is released) you can download from
here : http://www.xperiafirmware.com/compo...2-uncategorised/30-androxyde-xperia-flashtool
Download the .FTF file of your phone and connect your phone in Flashboot mode ( it may be volume down key , search for ur phone).
Then make sure you check Wipe data and cache partition and click the flash button.
I use Sony Xperia M Dual C2004. it worked for me and i am sure this will work for u too. if u have tested with this method and if it didnt work then i am so sorry i cant help u but trust me this will definitely work.:good::angel:
Click to expand...
Click to collapse
Thank you very much bro... it reallly solved my problem.... i still did not able to find the root cause..
But anyway now my phone is working and m able to flash any rom i want...
Thank you
chetan02012 said:
Thank you very much bro... it reallly solved my problem.... i still did not able to find the root cause..
But anyway now my phone is working and m able to flash any rom i want...
Thank you
Click to expand...
Click to collapse
so that's solved with wipe data and cache? i think why i don't think that ya, waaa but great job you can solved it
Nicklas Van Dam said:
so that's solved with wipe data and cache? i think why i don't think that ya, waaa but great job you can solved it
Click to expand...
Click to collapse
Nah it wasnt with the wiping of data and catche.. coz i did it mNy times.. but didnt work.
It was wid flashing the FTF with flashtool..
chetan02012 said:
Nah it wasnt with the wiping of data and catche.. coz i did it mNy times.. but didnt work.
It was wid flashing the FTF with flashtool..
Click to expand...
Click to collapse
so the step is re flash the firmware with ftf.file after that you do wipe data/factory reset? only that? i think that what i do, but i don't do any wipe data? pok it's not necessary, but first your phone has succesfully boot up right with unlocked bootloader Good job and happy flashing anyway:silly:
Hey Brother
Nicklas Van Dam said:
so the step is re flash the firmware with ftf.file after that you do wipe data/factory reset? only that? i think that what i do, but i don't do any wipe data? pok it's not necessary, but first your phone has succesfully boot up right with unlocked bootloader Good job and happy flashing anyway:silly:
Click to expand...
Click to collapse
Hey there,
When you flash .FTF file all your data on your phone will be erased , even the /System. So it restarts as good as before. Dont know whether this is the exact explanation but i did see this on Flashtool. so that made me tell this .. if u came through the exact explanation , plz do comment here. they are many waiting to learn. thanks:good::angel:
Sai Bhasker Raju said:
Hey there,
When you flash .FTF file all your data on your phone will be erased , even the /System. So it restarts as good as before. Dont know whether this is the exact explanation but i did see this on Flashtool. so that made me tell this .. if u came through the exact explanation , plz do comment here. they are many waiting to learn. thanks:good::angel:
Click to expand...
Click to collapse
but i think is that we can choose right? is that we want to wipe it? data or system in flashtool before we flash the .ftf file right? so why you say when we flash it the /data also erased automatically? i've flash it when my phone still locked bootloader to update 4.3 from 4.1.2 and my data is save? why?
Yes
Nicklas Van Dam said:
but i think is that we can choose right? is that we want to wipe it? data or system in flashtool before we flash the .ftf file right? so why you say when we flash it the /data also erased automatically? i've flash it when my phone still locked bootloader to update 4.3 from 4.1.2 and my data is save? why?
Click to expand...
Click to collapse
Hey there,
Yes we can select whether to wipe out data or not but the reason i mentioned is i want his phone to turn as new as before , you can exclude
wiping out the data but the remains of files in the /System can lead to undesirable , i never experimented but read in few blogs and few tld me abt this and that made me write it .so i never wanted to take chances and thats y i suggested him like that
i am no expert and still learning . but it is recommended to wipe out data and cache . thats what we do when we flash a custom rom right?
hope i was clear. thnx , gud day:angel::angel::good: