Develop Bugs

update 18-may dualizer major update: full toolkit(beta)!

major update here, the dualizer has become a feature rich toolkit for dualbooting. this includes a modified version of amon ra's recovery image. you need it to use the dualizer toolkit, it is included and can be flashed with one command.
it is a beta version for now. i have tested each option, but i cannot foresee all conditions you might have on your phone... have a backup at all time! and don't forget to backup the stuff from your sdcard before installing dualboot, during the creation of this toolkit i accidently deleted everything on mine...
there is no logging at the moment, if you get any error messages please paste them here in full.
i haven't tried a nandroid backup at all yet, and wouldn't advice you to do it either. please use apps like titanium backup to backup your stuff. i will be looking into getting some kind of nandroid capability, but that is not a trivial topic. i can however imagine to have full pc-based backup capabilites, sometime in the future...
before you use any of the romX options make sure you have installed the dualboot environment, i have no idea what happens otherwise...
i have tried to include a full description, please let me know if something is unclear (i hope it is obvious that romX needs to be replaced with either rom1 or rom2):
Code:
kendon's dualboot toolkit for the HTC Hero
usage: ./dualizer <option>
place the two roms you want to use for dualbooting in the
rom1 and rom2 subdirectories. make sure directories do
contain other files. you can use the temp/ subdir of the
two rom folders to store your roms while you want to flash
another update.zip
you need a modified version of Amon_Ra's custom recovery image.
it can be installed with this tool, see the options.
options are:
help show this information
vmsetup prepare ubuntu vm for usage
check-dev check if your device is properly attached and connected via adb
boot-rec reboot hero to currently flashed recovery
check-rec check if RA-hero-v1.6.2-DBmod is currently flashed
boot-dbmod put hero in fastboot mode (back+power) first!
fastboot hero with RA-hero-v1.6.2-DBmod
no permanent changes are done, works with unlocked spl only
NOTE: the trackball doesn't select, use green key instead
unlocked-spl copies update.zip for unlocked spl to sdcard, so you can flash it.
if this goes wrong it can brick your phone, make sure you do it right!
flash-dbmod flash RA-hero-v1.6.2-DBmod to recovery partition (permanently)
NOTE: the trackball doesn't select, use green key instead
install-db ALL your data will be lost, so you better have a backup!
install dualboot environment on htc hero
this includes partitioning of the sdcard
place roms in folders rom1 and rom2 first!
romX wipedata wipe data/factory reset romX
romX wipedalvik wipe dalvik-cache for romX
for the following options place update.zip file in folder romX first!
romX flash flashes update.zip from folder romX
romX makeboot create boot.img-update.zip files for romX
romX makeboot push create boot.img-update.zip files for romX and push it to /sdcard
i don't see any potential to brick your phone, even if it fails, as the critical parts (spl, radio) are not touched at all. worst that could happen is that you have to do a full wipe and flash a rom... be careful while flashing recovery and/or bootloader though!
as always: use at own risk!
note: first (and maybe second) boot maybe painfully slow. after that it gets better, see for yourself if it is too slow for you. i have been using villainrom and slidevillain in a dualboot for a few days now, i haven't noticed too much slowdown. then again i don't care too much about this.
credits: huge thx to the ppl in this thread: http://forum.xda-developers.com/showthread.php?t=594077 the information in there helped a lot.
changelog:
v0.2: major update, toolkit for flashing, wiping etc.
v0.1: initial release

installation & usage instructions
please read the first post before you install dualboot!
instructions for windows:
instructions for windows said:
the dualboot install can now set up all necessary stuff in a fresh installed ubuntu virtual machine in virtualbox. you must have adb access to your hero from the windows command line, if you need help check theunlockr.com for their awesome video tutorials.
here is a great howto install virtual box in windows: http://www.psychocats.net/ubuntu/virtualbox
and this is the second part, howto install ubuntu in a virtual machine: http://www.psychocats.net/ubuntu/installing
once you are done installing ubuntu download the archive from the first post and follow these steps (the default download directory is "Downloads", so i'm gonna use that in this example):
- go to "Downloads", you find it in "Places" in the upper menu bar
- rightclick the zipfile you just downloaded and select "Extract Here"
- open a terminal window: goto Applications, Accessoires, Terminal
- execute these commands:
Code:
cd ~/Downloads/dualizer/
chmod +x dualizer
./dualizer setup
it will ask for your password once, then do some stuff and finally reboot the virtual machine.
once rebooted, connect your hero to your pc, rightclick on the usb sign in the lower right corner of the virtual machine window and select the "HTC Android Phone". some hardware installations from windows might pop up (happened to me), just click on next and let them do their stuff. if it doesn't work at first shut down ubuntu, then restart your pc and continue. "reboot tut gut", as the german likes to say
back to ubuntu, with your hero connected to pc and virtualbox, open a terminal and check if your hero is detected by adb with the following commands:
Code:
cd ~/Downloads/dualizer/
./dualizer check-dev
this will tell you if your device is properly connected. you can now continue with the options you can get from
Code:
./dualizer help
Click to expand...
Click to collapse
instructions for linux:
instructions for linux said:
you need java, perl and zip setup, make sure that these are available. then follow these steps:
- extract the attached zipfile from the first post on your pc (for this example i'll assume you extracted it on your desktop).
- get the two roms you want to dualboot, do not extract them.
- put one rom in the rom1 folder, the other rom in the rom2 folder inside the dualizer folder on your desktop.
- open a terminal, cd to the folder and make the main file executable by typing:
Code:
cd ~/Desktop/dualizer
chmod +x dualizer
- turn on your hero (recovery or normal, doesn't matter)
- connect your hero to your pc and check if your hero is detected by adb with the following commands:
Code:
./dualizer check-dev
this will tell you if your device is properly connected. you can now continue with the options you can get from
Code:
./dualizer help
Click to expand...
Click to collapse

reserved...

Holy... this is incredible. Great job on getting this out.

I use a virtual box and ubuntu 10.04 lts.The method seems to work but in step 3 on partition card my hero restarts and boots in recovery and i don't have time to mount the usb/htc device into virtual box so i get in step 5 an no device found error.The time is very short.I have to press USB-MS toggle on my hero and after that i have to mount it in virtual box.I've tried it over 20 times but i don't have time and in terminal get me the error.Is there a way to pause the process or a solution to my problem?
Sorry for my bad english
EDIT:SOLVED.Set the sleep from dualizer in step3 from 15 to 30.Wainting for setup to finish.Cross my fingers
EDIT2: Ok now this is getting awkward.Waiting on step 4 (push to sd) for 25 minutes now.I have checked the log.Last line says mounting /dev/block/mmcblk0p1 on /sdcard failed: No such file or directory.Should I wait for it any longer?Or what should I do now?

As I have said on the VillainROM forum; this is really outstanding work.
Well done, Kendon.

Zero00SM said:
EDIT2: Ok now this is getting awkward.Waiting on step 4 (push to sd) for 25 minutes now.I have checked the log.Last line says mounting /dev/block/mmcblk0p1 on /sdcard failed: No such file or directory.Should I wait for it any longer?Or what should I do now?
Click to expand...
Click to collapse
that shouldn't happen, and the pushing shouldn't take longer than a few minutes. you should cancel it by pressing ctrl-c, if you fancy debugging then check why it wouldn't mount. otherwise you can partition your sdcard, do a full wipe and should be able to flash a regular rom.
i guess i underestimated the complexity of the virtual machine solution, gotta look deeper into this... *sigh*

Hi, regarding the Apps2SD issue... Would it ever be possible for the two ROMs that are dual booting to have the same apps sourced from one place... if that makes any sense...
Like in windows... you can "install for all users" so if you log off and someone else logs in with there account the very same apps are there...
Ok bad analogy since we are talking about dual booting different versions like (Vista & Windows 7) ... but the same data on hdd is accessible...
is this possible with the dual booting scenario?
If I had Slide Villain and Villain 5.5 .. both being 2.1 ROMs which would make app compatibility a non-issue...
If I booted up Villain 5.5 and made changes to an app / save data .. could this not be accessible with the slide rom.. I would hate having to install the very same apps on another partition..worst of all if you have save data (such as a game) and wanted to play it on one of the ROMs your game progress would be different?
you could just use Titanium to transfer over the data but agaqin it is a long procedure.
It would be fantastic if we could mirror image exactly what we have on our main Roms to our "secondary roms" ...

Amazing !
Ciao
Fred

Yeah this is really amazing. I have read this on villainRom forum, and i was stupified .
But, if i want to flash another Rom as primary and need to wipe cache, i need to do this process again! Am i right?

for the shared apps:
a shared apps2sd directoy/partition is possible, although you'd have the problem that apps are installed to one market only, and idk what would happen when you update an app in one rom, would the update get market-linked in the other? you can solve this with titanium backup, but it isn't really comfortable at all. i'll think about this.
for shared data: in theory possible as well, but i don't think it would work out well. you cannot distinguish between system data and apps data that easily, and i don't think it would work to share system data (sense settings etc) between two different roms...
@masterxiter: easiest way to do this is to use the installer script again. you can wipe the cache manually, installing another rom would be really complicated (about as complicated as the installer script )...

Sweet. But is there any way i can run this in cygwin? every version of linux ive tried so far doesnt support my crap compaq wifi card or most things, or even wired for that matter, and running ubuntu in a virtual machine gives a reboot every time after step 1 (maybe cos i suck at terminal)

i'll try some time, but i have never used cygwin... so don't expect anything too soon.

joshman99 said:
Sweet. But is there any way i can run this in cygwin? every version of linux ive tried so far doesnt support my crap compaq wifi card or most things, or even wired for that matter, and running ubuntu in a virtual machine gives a reboot every time after step 1 (maybe cos i suck at terminal)
Click to expand...
Click to collapse
if you install ubuntu in an virtual machine like VMware(paid) or virtualbox(free) you can just use linux, it will automatically grab all your internet settings and stuff from the windows installation(main computer) so your windows will be like some kind of router for your virtual machine with everyhing working.
Very nice tutorial, i'm not going to try it.. because my phone has to be resend to HTC for fixing some dead pixels, there just messers with screens
BTW. you can also try another linux version sounds crazy, maybe try backtrack?? the only thing you need is linux, backtrack is..

I have backtrack 4 (I could never get wifi on that either, but tbh i couldnt work out how to try (that distro is soo confusing imo). I got backtrack 3 to work a while back, so if i can find the disk im gnna try that.
Also virtualbox didnt put my internet settings at all (maybe co im on win7 ultimate?)
Thanks for the suggestions, cos i know cygwin aint the most elegant solution

changing rom 1 and rom 2
i test lotz of roms.... everyday they are being updated...
say if i dualize with ahero0.8 and Kimera 1.7....
wud i be able to update aHero to 0.9 and leave kimera as it is???
simply can i update JUST ONE rom???

manual setup??
i tried it got error in step 3 and then 'Device not found errors...'
can u make a tutorial for doing it manually.....

kendong2 said:
please read the first post before you install dualboot!
instructions for linux:
you need java, perl and zip setup, make sure that these are available. then
Click to expand...
Click to collapse
hihi.. i am trying to do a dual boot, so im wondering what u mean by.. need java , perl and zip setup... can advice me?

He means that you need to have Java, perl and zip installed and configured on your Linux system. If you dont have that installed and configured correctly than the install script wont be able to run.

lolnl said:
He means that you need to have Java, perl and zip installed and configured on your Linux system. If you dont have that installed and configured correctly than the install script wont be able to run.
Click to expand...
Click to collapse
oh noes.. .i do not have those in my ubuntu, does that mean i cant do a dual boot? btw, i saw post 2 and post 3 ... are they the same instruction ? or different? (one for windows user and one for linux?)

[N2E][1.1] TouchNooter 2.1.31

This Nooter is officially supported by The Nooter Project for Nook Simple Touch​
I'm not adding certain things because I don't believe they should be available as part of a rooting kit designed to give users more control of their devices. Things such as additional readers or CPU Clocks are up to the user to install themselves and needlessly putting them in Nooter creates app bloat that a user may or may not want. You can always drop Apps you want into \nooter\data\app and they will install automatically when you root the device. This Nooter is designed with the sole purpose of opening up the possibilities of the device by giving users Root, Google Apps, and other Apps which make the device more usable as an android device than just an e-reader.
What it does:
Enables ADB via uRamdisk
Installs adbWireless
Installs Button Savior
Installs NookTouch Tools
Installs Amazon Marketplace
Installs su and Superuser.apk
Installs ADW + E-ink Friendly Theme
Installs Busybox & Busybox Installer/Uninstaller
Installs Gapps (Gmail, Market, Youtube, Others)
Installs NookColor Tools (To Enable Non-Market Installs)
System Files that get Modified:
/system/build.prop - Enabling Google Check In
packages.xml - Allows Gapps to install properly.
framework.jar - Should allow a proper Android ID to generate.
Changes:
January 26, 2012 -
Tested Fix: ADW not installing - Caused by spaces in ADW's Filename in 2.1.26
Added: Amazon Marketplace, Opera Mini
January 26, 2012 -
Added: adbWireless, SuperManager (Root File Manager, APK Manager, other useful tools), Busybox Installer/Uninstaller
Untested Fix: Market 1 Day wait
Updated: busybox, ButtonSavior.apk, su & SuperUser.apk
November 20, 2011 -
Removed: GoLauncher, LiveWallPaper Picker, maybe some other stuff.
Added: New Market, ADW with Black Minimalist Theme, NookTouchTools.
New: Rooting Image
June 24, 2011 -
Removed: Multitouch Permission
Added: Modified framework.jar
June 22, 2011 - Fixed: Script not running at boot.
June 20, 2011 - Initial Release
Before you begin:
You must already have a registered Nook Simple Touch
You must have a Gmail/Youtube linked Account. IF you used a Gmail account for B&N Registration you should use that one for this process.
You must either have dd (Linux) or WinImage (Windows) software.
You must have an external microSDCard reader or this will not work. Using the Nook Simple Touch can result in it becoming unusable (bricked).
You must have enough intelligence to follow instructions.
Let's get started:
Download TouchNooter from here: touchnooter-2-1-31.zip - Uploaded
Linux: Unzip and use dd if=touchnooter-xx-xx-xx.img of=/dev/sdcard (where xx-xx-xx is the version number)
Windows: Unzip and use WinImage to "Restore Virtual Hard Disk Image" to your SDcard.
Windows Alternative: https://launchpad.net/win32-image-writer/+download
If you wish to use Underclocking follow these steps
Download Underclock.zip from uploaded attachments
Unzip it and place the data folder in /nooter/
Check that the com.antutu.CpuMasterFree folder is in the /nooter/data/data folder
Check that com.antutu.CpuMasterFree.apk is in /nooter/data/app
Power off your Nook Simple Touch.
Insert TouchNooter SDcard into your Nook Simple Touch.
Power on your Nook Simple Touch.
You should see the new TouchNooter boot screen, follow all instructions.
That was the hard part, now to the simple stuff.
Upon boot unlock your screen.
At the Android Welcome Screen skip Sign In.
Enable Location Services when given the option.
Connect to Wifi and launch Youtube from ADW's App Drawer (Or the App Drawer of your Choice).
Click the Menu button (The right one in the middle of the status bar).
Select "My Channel" and Login using your Gmail Account.
Exit Youtube and Launch Gmail from ADW's App Drawer.
Sync your Gmail Account and Exit. (If it fails to sync that is fine.)
At this time Market fails and you must wait up to a day. Just check it every so often. Future updates should fix this.
Open up Market and Accept Terms and Service.
If you made it this far your nook should be successfully Rooted. Go Download an App to make sure.
Enable Non-Market Installs by running the NookColor Tools App.
If your Youtube fails to launch Uninstall and Reinstall Youtube from /data/app
Go to Settings > Device Info > SdCard > UnMount > Format
Thanks To:
XorZone - NookTouchTools - http://forum.xda-developers.com/showthread.php?t=1289894 - Sorry, been busy, credit where credits due.
Torimu.Joji - For the configurations for CPU Master Free that allows simple automated underclocking
xevious - Kick starting my brain to get this update out
mali100 - modified framework.jar for 1.1
eded333 - Repackaged Gapps, the idea that may fix 1 Day Market Issue.
ros87 - uRamdisk
nemith - helping me figure out getting it to run at boot.
JesusFreke - For getting root.
MrMuffin - For the original Market Hack that we're using.
If I'm using an app in TouchNooter and you would like Credit/Thanks, or to have it removed, please PM me, otherwise I might not see your requests
Currently Working On: School

What's great info but are you going to still develop it to make gapps working?

domi.nos said:
What's great info but are you going to still develop it to make gapps working?
Click to expand...
Click to collapse
If I can find a way to do it without killing the device I will.

Works great
Hi
It works great, thanks.
Beside the full GApps do you know if there's a way today to get the Market working on a firmware 1.1 with TouchNooter 1.11.11 ?

ZeAuReLiEn said:
Hi
It works great, thanks.
Beside the full GApps do you know if there's a way today to get the Market working on a firmware 1.1 with TouchNooter 1.11.11 ?
Click to expand...
Click to collapse
Go through all the steps manually with something like noogie. The reason TouchNooter can't do it is because to get the script to run requires the the system to boot, replacing the files while the system is active will cause the system to crash when you go to reboot it to complete the steps for Market. Because of this to install Gapps you have to use a method that doesn't require the system to be active like Noogie.
Another method which would allow us to add Gapps, is if someone completed a version of CWM for Nook Touch.

Dear Gabriel,
somehow i gained working market on my Nook with 1.1. I used the older touchnooter with subplanted framework.jar and uRamdisk (wifi one). Then i've done all steps as in guide. Market however didn't saw any applications. I removed youtube app, and it started working! Then updated market to that one http://forum.xda-developers.com/showpost.php?p=15084704&postcount=51 using adb.
"adb install -r Vending.apk"
And right now i'm cool.

I've done the root for 1.1 manually, and it was a bit of a pain, so everybody should be thanking Gabrial here for streamlining the process a bit and not having to hunt down all the elements necessary to make a rooted Nook useful. (It's not actually difficult, but nobody has centralized *all* of the info even if much of it can be found in the Knowledge Base thread, including e.g. that you need Busybox even for something as simple as the cp command.)
domi.nos-
Is the -r switch for reinstallations any different than removing the old Vending.apk and then installing the new one? I still have not got market 100%; search won't work. Is it working for you? It's not really that big a deal because I only need a few apps but all the same it'd be nice...

Is it necessary to revert to original Nook ROM (the backup I've made before rooting the Nook Touch)?

No as a see it does not search. ;/ But in my opinion it is more important to find out why did my nook (any everyone elses' as i presume) disappear from pc market website.
But as i remember in the previous 1.01 software market couldn't do true way of searching, it was only showing most used searches.

This may sound dump, but I don't have a lot of knowledge with android yet.
This root is without any google apps, Can I download the google apps apks and install them on my device?

Dark_hawk,
From what I read from Gabrial, the only way to install Gapps if when nook is booting, and there is no safe way as from now. I'm still checking, though.
My experience so far? 1.1, touchnootered with 1.11.11, backup recovered with titanium backup pro (which worked quite well, I might add), and besides market, everything else is working?
I'm looking for info on how to install Gapps, or market at least, but no luck yet. Gabrial mentioned something about using noogie, but I don't even know where to look for Gapps version that may work on Nook STR>

(Hard method)
First, install this:
http://forum.xda-developers.com/showpost.php?p=19201466&postcount=352
Then try this, it should work:
http://nookdevs.com/NookColor:Manual_market_enable
and if search dosn't work, this:
http://forum.xda-developers.com/showpost.php?p=15084704&postcount=51
(Easy method)
Follow this guide:
http://www.mobileread.com/forums/showthread.php?t=156539
Read post 7, it explains how to do it easily.

How can I install Side-loaded APK?
I think, its dumb NB question... but I can not figure out, how I can install side-loaded APKs... I copied APKs to Nook but just not find a way to install them on nook... Is this something simple ? or not that simple as I think?

WORKS WITH 1.1.0 and gapps!
eded333 said:
(Hard method)
First, install this:
http://forum.xda-developers.com/showpost.php?p=19201466&postcount=352
Then try this, it should work:
http://nookdevs.com/NookColor:Manual_market_enable
and if search dosn't work, this:
http://forum.xda-developers.com/showpost.php?p=15084704&postcount=51
(Easy method)
Follow this guide:
http://www.mobileread.com/forums/showthread.php?t=156539
Read post 7, it explains how to do it easily.
Click to expand...
Click to collapse
The Easy method above worked perfectly with my new nook running 1.1.0.
all I would add is that I got search working in the market by toggling "allow non market apps" in Nook Tools app, then installing the vending.apk file from my sd card with ES file explorer as an application. just select yes when it asks you to replace system app.
To get ES file explorer to begin with, I scrolled thru the whole list of top free apps, which took awhile.
Apps that I was able to install and work:
ES file explorer, Facebook, Google reader, Google voice, XDA app, Opera mobile, Opera mini, Google+, Quickpic and Paint easy.
Thanks to everyone for all the hard work that made it easy for a N00b like me to root and customize my NST!

Orz-Orz said:
I think, its dumb NB question... but I can not figure out, how I can install side-loaded APKs... I copied APKs to Nook but just not find a way to install them on nook... Is this something simple ? or not that simple as I think?
Click to expand...
Click to collapse
+1 It seems ES File Explorer is not installed!

Well, I followed the recipe:
- Restored
- Resetted
- Updated to 1.1.0
- Touchnootered with 1.6.24 and framework and uramdisk for 1.1.0
- Three locked boots (at least 5 minutes each)
- When tried without SD, got back to regular nook!!!!
I did register, though, after reset. Would that make a difference???
Gotta try.

I've tried to install ESFile Explorer through browser but with no results. Besides, browser crashes when, for instance, I try to write something on google.

One way to side-load apk's
Orz-Orz said:
I think, its dumb NB question... but I can not figure out, how I can install side-loaded APKs... I copied APKs to Nook but just not find a way to install them on nook... Is this something simple ? or not that simple as I think?
Click to expand...
Click to collapse
The way I did it was to copy apk's to my SD card, then download a file explorer/manager app from the market (my personal favorite is ES file explorer), which allows you to view the contents of your SD card, and select apk's to install.
---------- Post added at 07:48 PM ---------- Previous post was at 07:32 PM ----------
apeine said:
Well, I followed the recipe:
- Restored
- Resetted
- Updated to 1.1.0
- Touchnootered with 1.6.24 and framework and uramdisk for 1.1.0
- Three locked boots (at least 5 minutes each)
- When tried without SD, got back to regular nook!!!!
I did register, though, after reset. Would that make a difference???
Gotta try.
Click to expand...
Click to collapse
It sounds like you did it the exact same way I did. Just to make sure did you delete the old Framework and uramdisk files, then copy/rename their replacements to match the original files? i.e. framework.jar and uRamdisk
---------- Post added at 07:51 PM ---------- Previous post was at 07:48 PM ----------
myself11 said:
I've tried to install ESFile Explorer through browser but with no results. Besides, browser crashes when, for instance, I try to write something on google.
Click to expand...
Click to collapse
I think the easiest way to get it would be from the market. if you haven't updated the vending.apk file to fix searching the market then you would have to use the category buttons at the top of the market to browse for it and install it.

Yes, I deleted the old version, installed uRamdisk usb 1.1 and framework 1.1.jar and renamed them properly (same name as erased files).
Did it all over again, no registering, and same result: after running for 3 times, went back to regular nook STR!!!

Forget about the restart the process three times, do it like this:
1) Use nookRestore to restore /system.
2) Erase and Deregistered to wipe /data
(If it dosnt let you, force it shutting down your nook, then starting it up, and when the screen flickers press right and left bottom buttons, hold for 5+ seconds).
3) Register, or not, as you preffer.
4) Apply 1.1 firmware update.
5) Open the TouchNooter 1.6.24 image and inside the nooter folder, search and substitude the uRamdisk for this one http://www.multiupload.com/CJ981FWPJG
and framework.jar for this one http://forum.xda-developers.com/showpost.php?p=19201466&postcount=352.
6) Use the new TouchNooter 1.6.24 to root your device. Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=1132693
If it dosnt work, try again until it works.
7) Continue with registering: Youtube (401 error) --> GMail --> Market.
8) Download adb, and unzip it:
http://forum.xda-developers.com/showthread.php?t=1124160&page=6
download this vending apk:
http://forum.xda-developers.com/showthread.php?t=1124160&page=6
and sqlite3:
http://www.sqlite.org/sqlite-shell-win32-x86-3070900.zip
copy the apk and sqlite3 tothefolderyouunzippedadb/platform-tools , open cmd and then:
cd tothefolderyouunzippedadb/platform-tools
adb connect yournooktouchip
Now we are going to enable non market apps use my method, or what madmachinist said:
adb shell
mount -o rw,remount -t ext2 /dev/block/mmcblk0p5 /system
adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
sqlite3 settings.db "update secure set value=1 where name='install_non_market_apps';"
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
adb reboot
now when NST reboots:
cd tothefolderyouunzippedadb/platform-tools
adb connect yournooktouchip
adb install Vending.apk
adb reboot
You are done, everything should work now.

[Guide] Eden Midas 8" Tablet

Moderators, please permit me to leave the tablet's Korean name (Eden Midas: 이든 마이다스) here so it shows up in google searches (if you don't have Korean fonts, it will probably show as garbage, but it really does say "Eden Midas" in Korean script).
This thread is intended as a place to collect together information about the Eden Midas tablet. It's quite possible that we will eventually find that the internals are the same as one of the Chinese tablets using the RK2918 chipset, in which case the thread may just turn into a pointer to that other thread.
What is the Eden Midas tablet?
In the form I have it, an 8" tablet based on the RK2918 chipset, with ICS 4.0.3 and kernel 3.0.8+ (whatever the plus may mean). It's quite nice, with a very clean 1024*768 screen. But like most RK2198 builds, severely locked down and marketed just as an entertainment station. At present, it seems to be only sold online in Korea. My build is V1.0.1.IMK74K.eng.root_20120508.165508_HW:1.0.0.0 (I wonder if the HW stands for huawei??).
Rooting[\B]
This is all I've done so far. Here's what I did:
On Linux
What's needed:
You may need to have root privileges on your linux system (you will need to mount some filesystems, and edit a udev rule file - depends on the linux system who is allowed to do these). You will also need rk2918tools ( https://github.com/lamegopinto/rk2918tools) - these are tools collected by lamegopinto, credits inside to the original authors; specifically, you will need ivop's rkflashtool.
In theory, this shouldn't remove your applications, data, and settings. In practice, on my machine, it did. So I'd back everything up first. And take out any external sd card so it's safe. Also, I better warn that I had a few scary moments getting to here, so please make sure you have really good backups. You will need (on your linux system) copies of su, Superuser.apk and busybox.
Connect the tablet by USB to your linux machine (real or virtual). Put the tablet into fastboot mode by holding down the whole +/- key, then pressing the start key for about 3 seconds. Keep holding the +/- key for up to ten seconds. If the system boots or goes into the boot screen (android open robot icon) you need to try again.
On the linux system, type lsusb (if you get an error, you probably need to install usbutils - how you do this depends on the linux system). If you see 2207:290a, you are OK. If you see 2077:0000, you missed fastboot mode and need to try again.
Tell linux about your device. You need to install udev rules.
Code:
cd /etc/udev/rules.d
sudo pico 61-android.rules
then create the content
Code:
# USB devices
SUBSYSTEM=="usb",ATTRS{idVendor}=="2207",ATTRS{idProduct}=="0000",MODE="0666",GROUP="users"
SUBSYSTEM=="usb",ATTRS{idVendor}=="2207",ATTRS{idProduct}=="290a",MODE="0666",GROUP="users"
This is for fedora 17. On current ubuntu the priority number (the 61 in the file name) probably needs to be different (maybe 51?). In earlier systems, the udev rule format is different, you're going to need to google this. The above rules also include one for adb mode, which will probably turn out useful. If you want adb mode, you will also need to do this:
Code:
pico ~/.android/adb_usb.ini
and create the content
Code:
0x2207
Create a directory called MIDAS inside the directory where you stored the rkflashtools. You need to have probably 2 times the capacity of your sdcard available (if you have an 8GB internal sdcard, I'd aim for 16GB+ free). Go into that directory.
Use ivop's rkflashtool to retrieve the first 2K blocks of memory:
Code:
../rkflashtool r 0x0 0x2000 > headers
This will create a file called headers. It's a binary file, but the important bit is readable. Try
Code:
more header
to read it, and carefully note down the partition locations (note that the order parameter order is the opposite to what rkflashtool uses. [email protected] means that the partition consists of X blocks starting at Y. Whereas for rkflashtool, you specify "rkflashtool (r or w) Y X (< or >) filename". The numbers X and Y are in hex notation (that's what the 0x at the start means). Note also that the MIDAS has a different layout to the tablet Ivop was discussing).
Now retrieve all the other partitions from the device, giving them descriptive names. For root, the only one you will actually need should be system.img. But get the rest just in case, as backups... Please note that there seem to be some funnies with this device, and rewriting partitions often causes it to reinitialise everything. It's probably doing some checksumming... Please keep these image files safe, and don't edit them! But you can gzip them to reduce the space they take up. Please note also that the last partition - usually the user partition - goes to the end of your card. So you need to convert your flash card size into a hex number (e.g. 8GB is 0x200000000 bytes, or 0x10000000 512B blocks). Suppose the user partition starts at 0x32A000. Then you need to put its length as 0x10000000 - 0x32A000 = CD6000 blocks (you may need a hex calculator for this).
Download su, Superuser.apk and busybox (these are all public domain) into your MIDAS directory
Code:
cp system.img system.new.img
mkdir mnt
sudo mount -t ext3 system.new.img mnt
Copy su into mnt/xbin, busybox into mnt/bin and Superuser.apk into mnt/app (simplest is to use a file manager to do this - or use linux commands). At this point, your image is complete!
Code:
umount mnt
../rkflashtool w (the system partition address and length for _your_ system image, which might be different from mine) < system.new.img
../rkflashtool b
Disconnect the USB cables
Your system should now reboot. If you're lucky (I wasn't) it will reboot as a rooted system with all your files intact. If you're semi-lucky, it will reboot as a rooted system, but without your files. Hope your backups were good... If you're really unlucky, it won't reboot. You may need to recreate all partitions from the copies you just made above, and try again. If the system seems completely bricked, the reset button (the tiny pinhole in the back, just above the external sd card door) is your friend. Pressing it and going into fastboot mode can allow you to reload all your partitions (you did make those backup copies of all partitions, didn't you)?
On Windows[\I]
Sorry, I have no idea. If someone drafts a guide, I'm happy to put it up. Alternatively, you can easily install a ubuntu virtual machine inside your windows box. It will probably be easier, and the linux experience won't go astray in working with android anyway.
[Tun Drivers and Openvpn]
For some reason known only to themselves, the manufacturers have removed the Tun drivers from the ics kernel build. The kernel doesn't have the ability to load modules. (This makes sense for phones, maybe, but I can't understand why anyone would remove the ability to load modules in a tablet. Perhaps the Chinese government doesn't want it to be too easy for people to set up vpns?) Anyway, you can install what appears to be a suitable Tun module using Tun.ko installer. It installs OK but when you try to use it, the system freezes for about 10 seconds, then reboots. If anyone finds a version of the 3.0.8+ kernel (maybe 3.0.8- kernel would be a better name), suitable for the Midas and with either a built-in tun driver, or the ability to load kernel modules, please let me know.
Complete Reflashes
Not sure if there are any that will work right now. If you're really stuck, the cyanogenmod version for Cube might work, but it sounds like it is still a work-in-progress.

Do you have the kernel of the tab?
- Oma -

Oma7144 said:
Do you have the kernel of the tab?
Click to expand...
Click to collapse
Sorry, no - and sorry for the delay in replying, I didn't get notification for the thread.

Dump the firmware and upload the files: http://forum.xda-developers.com/showpost.php?p=35298423&postcount=462
- Oma -

Collection of Guides and Tutorials for G9(Also, how to root and get custom rom)

Welcome
I wrote this post to help people get their Archos g9 tablet running custom roms. If you have any improvement ideas, please post them so I can make this better source of information.
List of content:
Post 1
What is recovery
What is SDE and how to install it
-Also SDE for 4.0.25
List of most commonly used roms
How to install custom roms
How to install offical rom
How to multiboot android 4.0 based roms
Installing 3G stick and Huawei modems support.
Post 2
Change symlinks/binds.
Installing ADB
Installing SuperCharger
Installing Chainfire3D
But why?
FAQ
Useful links
What is recovery​You can boot to recovery menu by holding volume- while booting your device. From recovery meny you can calibrate your touchscreen, wipe data and do this kind of stuff. Installing SDE creates new entry to recovery menu, called Special Developers Edition. There you can remove android kernel, flash new, export hdd and data. In recovery move up and down with volume + and -. Select by pressing power button
What is SDE and how to install it​SDE is shortened word from Special Developers Edition. After SDE is installed, your tablet is able to boot to official rom, recovery, and SDE rom. Most of the roms advice you to use "Remove android kernel" from SDE before you install kernel. When you remove your android kernel from there and install kernel from custom rom, your archos boots directly to custom rom. If you don't delete it, your device boots to official, but keeping volume - while booting gives you change to boot to SDE.
There are 3 guides how to install SDE. Official SDE watermarks your device for archos (there is no watermark on screen ), so they can detect you have installed SDE in some point. It stays even if you remove SDE. Official way is more safe. Also, it removes "only" software warranty. If your devices powerbutton, Usb-port or etc brokes, you can still send it to warranty. Link to official SDE install guide. Big thanks for Shano56.
Then there is unofficial, a bit more dangerous method. It doesn't watermark your device, but is more complicated. Guide tells that it's outdated, but it worked for me. I used official 4.0.4 version while installing. Link to the guide. Big thanks to Shano56.
4.0.25 Guide, by surdu_petru
surdu_petru said:
Hi !
I uninstalled SDE by mistake yesterday !
...so, you can enable (install) unofficially SDE following this path ( work 100% on firmware 4.0.25 ) :
On your tablet :
check on Settings-> Developer options -> USB debugging on !
connect USB cable ( PC to tablet )
On your PC :
> adb push 1 /data/local
> adb push 2 /data/local
> adb shell
$ chmod 0755 /data/local/*
$ ./data/local/1
$ exit
> adb reboot
> adb shell
$ ./data/local/2
$ exit
> adb reboot
> adb push zimage /data/local/tmp
> adb push initrd.cpio.lzma /data/local/tmp
> adb push abcbox /data/local/tmp
> adb shell chmod 755 /data/local/tmp/abcbox
> adb shell /data/local/tmp/abcbox kd_flasher -k /data/local/tmp/zimage -i /data/local/tmp/initrd.cpio.lzma
( now you have installed unofficially SDE ! )
Flash Root version or other Custom Rom :
> adb reboot
> adb shell rm /data/local.prop
> adb push archos.ext4(.update) /mnt/storage
Go to SDE -> ( check "Reboot" on power off menu , and after a while press & keep volume down until you see SDE menu !)
Go to Recovery System -> Developer Edition Menu -> Remove Android Kernel -> I Undestand -> OK -> Developer Edition Menu -> Flash Kernel & Initramfs -> copy here zImage and initramfs.cpio.lzo appropriate archos.ext4(.update) -> OK -> wait to boot !
Now you have Rot version installed !
Here you will find the necessary files : Enable_SDE.zip
Click to expand...
Click to collapse
List of most commonly used roms​These roms are most commonly used. Most of them are still being developed. I also included link to rooted official honeycomb, because some people have better touchscreen responsibility with it.
ParanoidAndroid 3
Cyanogenmod 10, 4.2 mockup
Cyanogenmod 10
AOKP ROM
[email protected]
Clean_Slim&Fast(Based on official 4.0.25!)
Ubuntu. This requires special kernel, which is compatible with official android 4.0.4Overclockable stock rom
Early CM9
Stock ICS rom with root & busybox
Stock honeycomb with root. (FYI, kernel requires renaming while installing)
How to install custom roms​Custom roms have different installing methods, but basic idea is same. You move image file with specified name to specified location.
When coming from stock rom or whengoing to stock rom:
CyanogenMod 10, AOKP, CyanogenMod 9
surdu_petru said:
Installation : Now should be work on all devices Gen9 !!!
...connect USB cable to PC and ( you need to use a Rom with root access ) :
> adb shell
# stop
# rm -rf data/*
# mkdir data/local
# mkdir data/media
# exit
> adb push archos.ext4 /mnt/storage ( need to wait about ~150 seconds ) !
> at the same time do : adb reboot & press and keep volume down ; in SDE -> DEM-> Remove Android Kernel ( if exist ) -> Flash Kernel & Initramfs -> copy here zImage & initramfs.cpio.gz -> OK -> wait to reboot !
Click to expand...
Click to collapse
[email protected], Ubuntu, Root 4.0.7 Clean_Slim&Fast
surdu_petru said:
Install :
- copy archos.ext4.update(archos.ext4 in case of Clean_Slim&Fast) in /mnt/storage/ , you can use this command > adb push archos.ext4.update(remove .update if Clean_Slim&Fast) /mnt/storage/
- go to SDE -> Developer Edition Menu -> ( Remove Android Kernel if available ) -> Flash Kernel & Initramfs -> copy here zImage & initramfs.cpio.lzo -> OK! -> wait to reboot .....
- after everything was installed - please reboot your device !
Click to expand...
Click to collapse
Honeycomb
Install like Cyanogenmod and AOKP and others, but rename initramfs.cpio.gz to initramfs.cpio.lzo
How to install official rom​Download official 4.0.7 rom from here.
Now boot to recovery (hold volume- while booting) and choose update firmware.
Now there should be noew drive in your pc. Drop the downloaded firmware_archos_it4.aos to there and press ok in recovery. Keep usb plugged in while installing. It should take around 30 seconds to 2 minutes. Now choose ok again. your tablet should now reboot to stock rom.
4.0.24 Official is owrking on some devices, but because it won't work on all, i won't cover it here(yet)
How to multiboot android 4.0 based roms​Install modified initfram from this topic. Use the zimage from the rom you want to multiboot. AFAIK you can multiboot with following combos:
[email protected], Ubuntu (download newer kernel from later pages.), Root 4.0.7
and
AOKP, CyanogenMod 9.
You cant use [email protected] and AOKP because they do not use same kind of data. That means that after you have run first rom, the second will bootloop. That is also why it requires wiping data when changing from stock to aokp and vise versa.
Detailed:
Download dmenu-0.3a.zip, and extract initframfs to desktop. Then download [email protected] and stock 4.0.7 rooted. Extract Image files and zimage from either one of the roms. Now just instal like described in earlier section, while using initframfs from multiboot and kernel from other rom.
Installing 3G stick and Huawei modems support. ​
Trevd made a package to add 3G stick and extra Huawei modems work for AOKP and generally all ICS ROMs. This guy is awesome because he also made some Huawei modems work.
trevd said:
Hi surdu_petru and AOKP fans.
Great work as always, It's not a rom i'll ever use but It's the first time I've loaded an AOKP Rom, I like notification layout, I'll be having that away for my own personal rom Anyway I was more just passing through and noticed 3G was not working yet. As seen as though that seems to be my speciality and preoccupation/addiction for the last 9 months I thought I do something to remedy that situation for you.
Here's an hotfile link to download the update [ 3g-archos-aopk.7z ] this should contain everything you need to get the Archos 3G Dongle, just for ****s and giggles as a extra bonus i've also included the huawei support file as well :good:
Installation:
From a command prompt / bash terminal
Code:
7z x 3g-archos-aopk.7z
adb push 3g /
adb shell reboot_into sde
extracting the 3g-archos-aopk.7z will give youu a 3g directory in you current directory, we then push the contents of the 3g directory to the root direcotry on the device. This operation is recursive.
Have Fun!
What follows is a detailed explanation of what files and modifications are required to add 3G support.
Archos 3G Stick
The changes / additions to add this functionality breaks down like this ; The following required binary's were on the device already:
** /lib/modules/hso.ko is insmod'd by the device specific init file /etc/init/init..rc
Code:
/lib/modules/hso.ko[B]**[/B]
/usr/bin/usb_modeswitch
/system/lib/libtcl-ril.so
/system/bin/rild
/system/bin/pppd
/system/xbin/chat
/etc/ppp/init_pppd_datakey
/etc/ppp/ip-up-datakey
/etc/ppp/ip-down-datakey
/etc/ppp/peers/datakey
/etc/chatscripts/datakey_start
/etc/chatscripts/datakey_stop
/etc/usb_modeswitch/1bbb_f000
The following required services were already defined in the device specific init.rc's located in /etc/init/init..rc ,
*** switch_ms_3g defined by /etc/init/init.archos.rc
Code:
service service switch_ms_to_3g[B]***[/B]
service pppd_secrets
service pppd_datakey
service ril-daemon
So what's missing? you may ask as this pretty much is everything that is needed by the Archos 3G Stick.
Standard Archos Roms use the UsbKeyManager.apk system service to start the switch_ms_to_3g and ril-daemon service's. I replace that with my own ueventd handling native service and add an additional to configuration file keep everything clean
Code:
/system/bin/hotplugd
/init.dongle.rc
I've added the following line to the top of the /init.rc
Code:
import init.dongle.rc
All that is left to do now is enable mobile networks on the rom. I used apktool to decompile the /system/framework/framework-res.apk and change the following values
res/values/bools.xml
Code:
true
true
res/values/arrays.xml
Code:
wifi,1,1,1,-1,true
mobile,0,0,0,-1,true
mobile_mms,2,0,2,60000,true
mobile_supl,3,0,2,60000,true
mobile_hipri,5,0,3,60000,true
mobile_fota,10,0,2,60000,true
mobile_ims,11,0,2,60000,true
mobile_cbs,12,0,2,60000,true
wifi_p2p,13,1,0,-1,true
"1,1"
"0,1"
"7,1"
"9,1"
res/values/strings.xml
Code:
ppp1
Huawei Support
The extend this functionality further I added the following files
Code:
/etc/ppp/init_pppd_gprs
/etc/ppp/ip-up-gprs
/etc/ppp/ip-down-gprs
/etc/ppp/peers/gprs
/etc/chatscripts/gprs_start
/etc/chatscripts/gprs_stop
/etc/usb_modeswitch/ [ numerous configurations files ]
/lib/modules/usb_wwan.ko
/lib/modules/option.ko
/system/lib/libhuaweigeneric-ril.so
We also need to chmod 6755 /system/bin/pppd but that is handled/checked in the /init.dongle.rc so there is no need to do that manually
Click to expand...
Click to collapse

Change symlinks/binds​Trevd wrote guide to let people know how to change binds. That way you can move large folders, like Gameloft games and navigator files to ExternalSD, saving InternalSD space.
trevd said:
If you after freeing up space, it is still possible with a bit of hacking voodoo . There are 2 ways I know of in fact.
METHOD 1 - SDCARD SERVICE
you can point the /storage ( /mnt/storage in reality ) to any directory you like. I've currently got mine pointing to an multi partitioned external 32gb sdcard. :0 all you need to do is change the sdcard service in the /etc/init/init.A101S.rc,
Currently it mounts /data/media to /mnt/storage, if you have an external sdcard card handy, try this as a quick and dirty test
From a terminal emulator or adb shell run the following commands
Code:
stop sdcard ;
sdcard /mnt/sdcard 1000 1015 &
ls /storage
You will now see that the external sdcard can be access through /storage. to kill the test run
Code:
pkill -9 sdcard
start sdcard
Everything should be back to normal. As I mentioned to make a more permanent change edit the following line in the /etc/init/init.A101S.rc
Code:
service sdcard /system/bin/sdcard /data/media 1000 1015
METHOD 2 - MOUNT BIND
The other, perhaps more straight forward method uses the bind argument on the mount to command to "mount an already visible filesystem elsewhere" .
In the example I'll bind the external sdcard to a directory in the internal storage
use the terminal emulator or adb once again to execute the following commands
Code:
mkdir /storage/sdcard
mount --bind /mnt/sdcard /storage/sdcard
To make this more parmanent, I would probably create a wrapper shell script for the sdcard service to make sure it all gets started together, that's just my preference, As we say in trade ( or maybe it's a saying i've just made up :silly: ) ; "there's more than one way to mount a file system!"
In Summary: I would go with method 2 as this effectively achieves the desired effect off "symlinking" an external directory in the /storage
Cheers
Click to expand...
Click to collapse
Installing ADB​ADB comes from word android development bridge, and it allows you to debug, move files and get shell access to your tablet.
Archos said:
First make sure you are running the latest ARCHOS firmware. Connecting by this method will give you user shell privileges. Learn more to know how to use ADB on Windows, Mac or Linux operating system:
Go to the Android SDK page and download the latest SDK for your operating system.
For Windows users only: Install the Archos ADB USB Driver for Windows. The driver is available at the ARCHOS support ftp (ftp://support.archos.com). Instructions how to install the driver are available at USB Driver for Windows site on Android Developers.
Add Archos vendor ID (0x0e79) to adb_usb.ini in .android folder in your home directory:
Windows: echo 0x0e79 >> "%USERPROFILE%\.android\adb_usb.ini"
Macos: echo "0x0e79" >> ~/.android/adb_usb.ini
Linux: echo "0x0e79" >> ~/.android/adb_usb.ini
For Linux users only: You need to add a udev rule if ADB only works as root:
Create a file /etc/udev/rules.d/51-android.rules that contains the following lines:
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device",
ENV{PRODUCT}=="e79/*", MODE="0666"
SUBSYSTEM=="usb", SYSFS{idVendor}=="e79", MODE="0666"
Make the rule known to udev with the following command:
udevadm control --reload-rules (or udevcontrol reload_rules on older systems)
Click to expand...
Click to collapse
Running adb from anywhere
steviewevie said:
We need to update your Path variable. This lets you run adb on your PC from a command window no matter which directory you are in (which makes things a lot easier). If you don't setup your Path, then every time you want to run adb, you will either have to type the whole long pathname where you put adb, or cd to where you've put adb and run it from there (which could be inconvenient if you are transferring files to/from your phone).
On your PC, right-click on "My Computer" and select "Properties". (on Vista, click on "Change Settings"). Go to the "Advanced" tab, then select "Environment Variables". Find the "Path" variable in the list of variables that it shows (you might need to scroll), and then double-click on that entry to edit it. Add the full path of the "tools" and "platform-tools" folders of the SDK to your path. e.g. if the SDK has been installed in "c:\Program Files\android-sdk-windows", then add to your Path "c:\Program Files\android-sdk-windows\tools;c:\Program Files\android-sdk-windows\platform-tools" (Please Note - don't put any spaces between the semi-colon and pathname, otherwise it won't work !)
Click to expand...
Click to collapse
sources:Archos, steviewevie
Installing Supercharger​Supercharger is a multiscript which makes the tablet work much better. Its created by Zeppelinrox, and its official topic is here. We are using also script manager in this guide. That way we can make MinFrees and OOM apply.
In this guide we'll use Apex launcher which is moved to /system/app for our default launcher.
We are also using adb to configure and run Supercharger.
Because stock launcher is odexed and i am not writing how to deodex, we are not using it.
First make sure apex is your default launcher. This can be tested by pressing home button in homescreen.
If it show mini previews of your homescreens, apex is your default launcher.
Now lets begin:
go to here and download newest file. At
the time of writing, it is Update 9_RC11_test6. Move it to your adb folder.
Then open commandline. This can be opened with windowskey + R and writing cmd. Navigate
to adb folder using cd command. I have made adb to run from anywhere, so i just navigate to the downloaded file.
Now use command "adb push v6* /mnt/sdcard" then use command "adb shell". Now you should have
shell access to your tablet. Now do following
su
cd /mnt/sdcard
sh V6* /remember capital V)
Supercharger script should open now. After presentation, script should print after telling your busybox version
"com.anddoes.launcher is the home launcher!" Now continue install. Supercharger will tell you everything you need to know.
So just follow the instructions. After choosing kernel tweak, you get bunch of permission denieds.
We can't help them, so lets just continue.I recommend on using all the tweaks that you can,
but it is your choise do you want to use or not. After all the selections are selected and your in
driver panel, choose number 32. It'll reboot your tablet and wipe dalvik. When the tablet has booted, lets run supercharger script again.
So write these again:
su
cd /mnt/sdcard
sh V6_Super*
After getting to drivers panel, you notice that minfrees are not in effect, and neither is OOM Grouping Fix BUT if they are, you can ignore this step..
Install script manager from market and open it. Give it root permissions and navigate to /system/etc/init.d
press SS99SuperCharger to open its settings. Now press the Su button and then Boot button.
Now press save, and then click it's name which appers to right. Then press back button and reboot.
Now Minfrees should work, and OOM too.
Now you can run 22 if you want to try it. Supercharger is now fully working.
Installing Chainfire3D​
Chainfire said:
Chainfire3D is an intermediary OpenGL driver. What does that mean? It means that Chainfire3D sits between your apps and the graphics drivers, and can intercept and/or change commands between the two. It has some built-in functions, and can be further extended with plugins to provide extra functionality.
Click to expand...
Click to collapse
It is very useful for running gameloft games and other games too. I recommend buying it. There are some plugin for it, but i'm not going to tell you about it now.Play store link.
After downloading it, open it and choose "Chainfire3D Driver" and from there "install". Then confirm it and tablet should reboot. Now reopen it and choose "Default opengl setting". From there you can tweak 3D performance if some games lag. Also, if you install plugin, there you can apply them. I personally use "reduce texture quality".
But why?​
This section is to point few reason why to follow these guides. Lets begin:
SDE
Well, you should install this if you want to customize your tablet. If your happy with your tablet running stock, you don't need this, or any other guides.
Custom roms/kernels
Custom roms allow you to use root, they make your tablet faster and add extra functionality. This "functionality" includes: Overclock, run init.d scripts, enable both cores with all governors, root and themes. The benefits are not limited to these, but I could name this quickly. If you wan't to try something which is close to stock, but still has root and some custom functionalities, i would recommend deodexed 4.0.7, or [email protected]
Install official roms
These roms do not require SDE, but will not include root or anything fun . Updating your official rom has many benefits. They include fixes and boost your tablets performance.
Multiboot
Multibooting allows you to have 2 or more roms, which you can choose which to boot on startup. I would recommend this if you want to test functions with root, but still have "backup plan" if testing rom renders unbootable.
3G support
Basicly this allowes some extra huawei 3G sticks to work. There is no list of working stick, you just have to try and hope.
Change symlinks/binds
These allow you to "move" eg. gameloft games to external sd, and allow you to acces your externalsd via internalsd folder.. That way your gamedata does not eat the valuable internalsd space.
ADB
You need this to transfer rom to your tablet. It is also required when you sent logcat reports to help remove bugs.
SuperCharger
This makes your tablet work more fluid. I personally install supercharger to all my android devices. It removes need for task killer, and makes the device work better. Everyone has different results, and it costs only time to install, so i would recommend installing it.
Chainfire3D
This tool allows you to play games made for other GPUs and it can tweak application graphics. You can make the game look worse, but run better or adjust the grphics for a bit higher, so the game looks nicer.
FAQ[/CENTER]
These questions and answers are collected from various sources.
surdu_petru said:
How to activate second core for all govenors in surdu_petrus roms?
To activate the second core, you need the following steps :
- copy /system/S1tweak in /system/etc/init.d/ or ( > adb shell ; # cp /system/S1tweak /system/etc/init.d ; # exit )
- open No-frills CPU Control :
- choose the desired Governor ( but not hotplug ) !
- choose the desired frequency , but not overclocked ! ( when the device will boot - will open with the selected frequency , so please choose max. frequency = your max. stock frequency )
- check "Apply on boot"
- check "Applay"
- check allow if superuser asked permission
- reboot your device !
- Now , both core will be used in any selected Governor ( other than hotplug ! ).
Click to expand...
Click to collapse
What modems does Trevds mod support?
trevd said:
The theoretical list of supportted devices come from those devices supportted by usb_wwan and option kernelp drivers.
Click to expand...
Click to collapse
Shano56 said:
Can I just drag the .zip file to the RAMDISK that appears when I flash zImage and initramfs?
No! Archos recovery cannot read ZIP files. You must first EXTRACT, then copy the contents of the extracted folder. NOT the folder itself. This means you will have two files on the RAMDISK, and no additional folders. If you don't know what a RAMDISK is, try Google or Wikipedia. If you get stuck in a boot loop because you forgot to extract archos.update.ext4 or drive.zip, you must follow the instructions below.
Help! I am stuck in a bootloop! Archos splash screen appears and keeps rebooting. I messed up when I was rooting, and now android will not boot! I accidentally formatted my device, and now I cannot boot into android.
This is a simple mistake and in 99% of cases it is easy to fix. Follow these steps:
Step 1: Download official Archos G9 firmware for ALL G9 tablets (aos file) HERE
Step 2: Boot into recovery turning your device off and then holding volume down + power at the same time
Step 3: Choose "Update Firmware"
Step 4: Connect USB cable to computer and tablet
Step 5: A removable device should appear (RAMDISK), copy the file you just download straight to that drive
Step 6: Press the power button once the file is done copying. DO NOT UNPLUG your device until it has finished updating and has booted back into android.
If you did not format your tablet or delete any personal media, your files should be uneffected.
Will I lose SDE menu if I update my tablet with official AOS or OTA update
As of the latest update (4.0.6) no official update from Archos has removed SDE menu. You should be fine, and your SDE menu should remain untouched.
Click to expand...
Click to collapse
[/quote]
Useful links​Some link i consider useful are here:
G9 101 16GB 1.5GHz Teardown! (Lots of Images)
XBMC for android
Want faster GPS? Follow this guide

3th just i remember something to add. Comment and give me some feedback. It helps me to make this topic useful for beginners, and for those who seek info.

I meant to edit first post... well, this works as 4th reserved then.

Hi there!
You have been busy! Thanks for kind words, Just an heads up really, you might want to update your post as I deleted the usb-modem-binary-redist github repo yesterday as it was a bit too clever for it's own good and I think a bit of abuse/misuse of the concept branching! Just because you can, doesn't always mean you should LOL, with that in mind I'd probably advise against linking to my github repos as they don't stay static for very long. I generally leave the hotfile links up "forever" so link away with them.
The Information and files included in the new AOKP post about 3G Dongles should be good across all ICS roms. Finally allow me to throw out this mini guide I wrote a while back which explains an "app-free" method of freeing up space, I noticed there been a bit of discussion about it, Using an app just seem like overkill, but that's just me I suppose.
Anyway good work. :good:

trevd said:
Hi there!
You have been busy! Thanks for kind words, Just an heads up really, you might want to update your post as I deleted the usb-modem-binary-redist github repo yesterday as it was a bit too clever for it's own good and I think a bit of abuse/misuse of the concept branching! Just because you can, doesn't always mean you should LOL, with that in mind I'd probably advise against linking to my github repos as they don't stay static for very long. I generally leave the hotfile links up "forever" so link away with them.
The Information and files included in the new AOKP post about 3G Dongles should be good across all ICS roms. Finally allow me to throw out this mini guide I wrote a while back which explains an "app-free" method of freeing up space, I noticed there been a bit of discussion about it, Using an app just seem like overkill, but that's just me I suppose.
Anyway good work. :good:
Click to expand...
Click to collapse
Thanks for the feedback.
I removed the part which had github link, and modified the AOKP section to tell it works with all ICS ROMs.
I'll included your mini guide. I might even have some use for it myself...
Sent from my GT-I9100 using xda app-developers app

help me for multi boot ubuntu ics bleuv03
hello I want to know is it possible to bleuv03 ics and multi boot with ubuntu and it is possible that what zImage and iniframts I should use.
desoler for my english I'm french and I go through a translator thank you.

muti642 said:
hello I want to know is it possible to bleuv03 ics and multi boot with ubuntu and it is possible that what zImage and iniframts I should use.
desoler for my english I'm french and I go through a translator thank you.
Click to expand...
Click to collapse
Download zimage, initfram and Ubuntu image from
http://forum.xda-developers.com/showthread.php?p=26000199
There is a high chance that touchscreen will not work if you have 101 G9 model in Ubuntu. You can still use USB OTG devices like mouse normally.
Sent from my GT-I9100 using xda app-developers app

julle131 said:
Download zimage, initfram and Ubuntu image from
http://forum.xda-developers.com/showthread.php?p=26000199
There is a high chance that touchscreen will not work if you have 101 G9 model in Ubuntu. You can still use USB OTG devices like mouse normally.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
thank you for answered. j've already managed to install ubuntu and I had no problem touch by cons I Can not get a dual boot ubuntu and bleuv03 ics. I shall therefore understands the multi boot flash I then I put two images but in the memory of the tablet and then I flash the kernel you gave me quote above and I should be able to boot on 2 rom and bleuv03 ubuntu?

muti642 said:
thank you for answered. j've already managed to install ubuntu and I had no problem touch by cons I Can not get a dual boot ubuntu and bleuv03 ics. I shall therefore understands the multi boot flash I then I put two images but in the memory of the tablet and then I flash the kernel you gave me quote above and I should be able to boot on 2 rom and bleuv03 ubuntu?
Click to expand...
Click to collapse
Download the this kernel https://docs.google.com/file/d/0BxgjsI4pMALheHZoVUdIYnVTN28/edit
It can dualboot [email protected] v03. If the ubuntu does not boot after flashing it, download this ubuntu image:
https://docs.google.com/file/d/0BxgjsI4pMALhVl9kek9SSFpKb2M/edit

THX
julle131 said:
Download the this kernel https://docs.google.com/file/d/0BxgjsI4pMALheHZoVUdIYnVTN28/edit
It can dualboot [email protected] v03. If the ubuntu does not boot after flashing it, download this ubuntu image:
https://docs.google.com/file/d/0BxgjsI4pMALhVl9kek9SSFpKb2M/edit
Click to expand...
Click to collapse
Thank you thanks you it works well, I do not use the right kernel or the good image of ubuntu. ps: the touchscreen does not work but using the OTG is perfect.
thank you again julie :good:

sorry for ignorance but for root i need to have adb sdk for do this steps??
"- copy archos.ext4.update to /mnt/storage/ , you can use this command > adb push archos.ext4.update /mnt/storage/
- go to SDE -> Developer Edition Menu ->( Remove Android Kernel if available ) -> Flash Kernel & Initramfs -> copy here zImage & initramfs.cpio.lzo -> OK! -> wait to reboot .....
- the first boot may be longer ! "
If my archos is untoot how i use this comand? with adb sdk ?!

solrakk6 said:
sorry for ignorance but for root i need to have adb sdk for do this steps??
"- copy archos.ext4.update to /mnt/storage/ , you can use this command > adb push archos.ext4.update /mnt/storage/
- go to SDE -> Developer Edition Menu ->( Remove Android Kernel if available ) -> Flash Kernel & Initramfs -> copy here zImage & initramfs.cpio.lzo -> OK! -> wait to reboot .....
- the first boot may be longer ! "
If my archos is untoot how i use this comand? with adb sdk ?!
Click to expand...
Click to collapse
Yes, you must use adb. I assume your "untoot" means unrooted. You use cd command to navigate to your adb folder and from there to platform-tools. Also drop archos.ext4.update to there. Then use the adb command to move the file. Moving file to that location does not require root.
Sent from my GT-I9100 using xda app-developers app

Archos G9 101 HD
Hi Surdu,
I tried to update after SDE install and then accidentally dont know what happened have lost android on my tablet G9 101 HD. I cant see my hd on pc and is not booting but only can see the rom image which appears on boot without animation. How can I transfer the update archos.ext4 into Internal Storage without seeing the drive on PC win 7. I have made mistake in steps may be.
Please help.

hondacity said:
Hi Surdu,
I tried to update after SDE install and then accidentally dont know what happened have lost android on my tablet G9 101 HD. I cant see my hd on pc and is not booting but only can see the rom image which appears on boot without animation. How can I transfer the update archos.ext4 into Internal Storage without seeing the drive on PC win 7. I have made mistake in steps may be.
Please help.
Click to expand...
Click to collapse
Go to the recovery menu, choose update firmware. When it prompts you to connect tablet to pc, cobbect it, but to different usb port than last time. That should cause the pc to reinstall usb drivers for the tablet.
Sent from my GT-I9100 using xda app-developers app

Archos G9 101 HD
julle131 said:
Go to the recovery menu, choose update firmware. When it prompts you to connect tablet to pc, cobbect it, but to different usb port than last time. That should cause the pc to reinstall usb drivers for the tablet.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks, for so fast reply Dear...
I did the same as you advised and a drive with name ending with "REC" with a capacity of 299 MB appeared. I tried to copy the Surdu's Deoedex update but it has more weight in MBS about 390. So it could not. I tried original Archos ROM with weight of 186 MB and it copied. Started update but returned with an error "Update failed: (221)".....
Please advise.
Note: I also tried in SDE menu to export data drive and got a drive 1.48 GB which I formated from win 7 and succeded in copying Stock and Surdu's ROMs one by one but always failed to get android and it always say failed update. Still get unanimated Archos logo on startup with no further bootup.

hondacity said:
Thanks, for so fast reply Dear...
I did the same as you advised and a drive with name ending with "REC" with a capacity of 299 MB appeared. I tried to copy the Surdu's Deoedex update but it has more weight in MBS about 390. So it could not. I tried original Archos ROM with weight of 186 MB and it copied. Started update but returned with an error "Update failed: (221)".....
Please advise.
Note: I also tried in SDE menu to export data drive and got a drive 1.48 GB which I formated from win 7 and succeded in copying Stock and Surdu's ROMs one by one but always failed to get android and it always say failed update. Still get unanimated Archos logo on startup with no further bootup.
Click to expand...
Click to collapse
Okay... So you have sde installed? Good. First, let's get the official firmware working. Download the latest official ROM from archos:
http://update.archos.com/9/gen9/gen9_4.0.26/firmware_archos_it4.aos
Drop this to the 300mb partition called REC. Then press power and let it install.
Now follow the install guide o. The ROM you want to install
Sent from my GT-I9100 using xda app-developers app

Archos G9 101 HD
julle131 said:
Okay... So you have sde installed? Good. First, let's get the official firmware working. Download the latest official ROM from archos:
Drop this to the 300mb partition called REC. Then press power and let it install.
Now follow the install guide o. The ROM you want to install
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks Julle..But Now I understand that official ROM is not installing because of unofficial kernel flash I have already installed and had flushed original one. I think if I get original kernel then I can arrive to original Android ICS which you have mentioned. Please advise if you have any address of original kernel for "firmware_archos_it4.aos".
THANKS and Best Regards...
Further to my above thread...I found the stock kernel and flashed it but still after installing kernel and then original firmware, its giving same error of update failed (221).
Please advise if any remedy you prefer.
Regards...
Hi Julle,
Sorry too many threads from me but very much annoyed but sure thanks Dear for your kind help.
On export of HDD from "Repair system" menu...>>>> A drive appeared in PC but not opening as it says " Insert disk into drive". I think it is the problem which is preventing from installing the AOS file to run Android.
Please advise.
Regards,

hondacity said:
Thanks Julle..But Now I understand that official ROM is not installing because of unofficial kernel flash I have already installed and had flushed original one. I think if I get original kernel then I can arrive to original Android ICS which you have mentioned. Please advise if you have any address of original kernel for "firmware_archos_it4.aos".
THANKS and Best Regards...
Further to my above thread...I found the stock kernel and flashed it but still after installing kernel and then original firmware, its giving same error of update failed (221).
Please advise if any remedy you prefer.
Regards...
Hi Julle,
Sorry too many threads from me but very much annoyed but sure thanks Dear for your kind help.
On export of HDD from "Repair system" menu...>>>> A drive appeared in PC but not opening as it says " Insert disk into drive". I think it is the problem which is preventing from installing the AOS file to run Android.
Please advise.
Regards,
Click to expand...
Click to collapse
To install the update I linked, you shouldn't need any kernel changes. Removing kernel from SDE removes the official kernel, but that does not prevent installing official update. Also installing custom kernel will not prevent installing official rom.
I just do not understand why you get the 221 error as most of the people get it when that have incorrect file there or already have newer stock ROM installed. It is possible that your windows format broke it, because windows formats it to wrong format. You should never format any other than sdcards in windows. You could try the format system in recovery and choosing reformat device. After that install the official update I linked.
Sent from my GT-I9100 using xda app-developers app

Archos G9 101 HD
julle131 said:
To install the update I linked, you shouldn't need any kernel changes. Removing kernel from SDE removes the official kernel, but that does not prevent installing official update. Also installing custom kernel will not prevent installing official rom.
I just do not understand why you get the 221 error as most of the people get it when that have incorrect file there or already have newer stock ROM installed. It is possible that your windows format broke it, because windows formats it to wrong format. You should never format any other than sdcards in windows. You could try the format system in recovery and choosing reformat device. After that install the official update I linked.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks again Dear,
I applied same as you say but ending on same 221 error. Any thoughts please.
Best regards.:crying:

THBK1-10 thread: extend, root, hack !

Hello,
I'm the proud owner of an hybrid monster, called THBK1-10.
This is basically an affordable tablet, running both Windows 8 and Android 4.2.2.
10.1 display, running x86 Atom 4cores, 2Gb RAM, 32Gb eMMC, USB host enabled. It is shipped with an external keyboard/touchpad (no port, no battery, no extended storage on it). More informations: http://www.thomsoncomputing.eu/dualboot.html
Windows 8 comes in x86 flavor...
The boot process let you choose Windows or Android.
There is no play store. My main goal actually is:
- (ok) rooting Android part
- (ok) installing Play Store
- (ok) increasing space
- (nok) installing a recovery (CWM/TWRP) allowing you to flash non-signed updates
- (nok) running Linux from an external USB drive
Partition layout: http://forum.xda-developers.com/showpost.php?p=54095052&postcount=8
Rooting / play store guide: http://forum.xda-developers.com/showpost.php?p=55513404&postcount=23
Known clones: http://forum.xda-developers.com/showpost.php?p=54282229&postcount=10
Increasing space with external SD: http://forum.xda-developers.com/showpost.php?p=54914759&postcount=17
Timezone issue Android/Windows: http://forum.xda-developers.com/showpost.php?p=54945950&postcount=19
BIOS default (SlateDroid): http://www.slatedroid.com/topic/106594-thbk110-default-bios-values/
Have fun !

I know there are EXT2 drivers for Windows, and EXT3 is just EXT2 + Journaling (the journaling is an important feature, but it's not part of the security model). However, I'm not sure if any of those drivers can modify file permissions. Alternatively, one could of course hex-edit the Android partition and try to tweak the file permissions that way, but that would require much more understanding of the EXT filesystem than I have. The source code is all open, though...

Thank you. Here is what i did:
a) trying to handle EXT3 fs from Windows
-> with Ext2Fsd, i have accesses to all the partitions, including /system and /data, but unfortunatly, permissions are not correct
-> i trying with other tool (Explore2Fs) not luck
-> ltools seems to provide a lattr util that could do it, but i'm unable to see the files (certainly because of the GPT partition
b) trying to use VirtualBox with raw disk access for handling, with a linux guest, permissions:
-> up to partition 7, this seems correct
-> from partition 8 (/system), i can mount it in RO but it crashes in RW
c) trying to boot to any linux supporting EFI32 and GPT
-> thanks to paperwastage, i could achieve it (thread here: http://forum.xda-developers.com/showthread.php?t=2500078 )
-> i have strange troubles: the system only detect mmcblk0 to mmcblk7, and is throwing an error (error -110 + unknow command)
-> both, in clonezilla and ubuntu
d) tryed to use so android local tricks to force change mode, but once, i'm stuck with no eXecute flag. I dig around the local.prop or any stuff that would help me to achieve this goal. The recovery is not available (nor i found it) and the only thing i can do is factory reset.
It really seems only Windows got the proper drivers for this eMMC. This could explain why i had hard time to dump it (and, actually, i would not try to restore b/c i'm not sure everything is backuped correctly and don't want to brick my tablet), and why i could only write from Windows and why it cuts at partition7 (i have at least 12 partitions. NTFS windows main is the #11 iirc)
What i could try actually:
-> double check with newer ubuntu (when i started "install to disk", it seems it could detect the whole disk, have to look again)
-> double check with local THBK install (copy 3 apks bundled with the tablet, but perhaps a command script is available to be executed ?)
-> double check with virtual box & raw disk acces (i focused on /system, but perhaps /data is ok ?)
-> recompile Ext2Fsd to have different default properties
-> dig the hardware to see if a real recovery boot is not available, or change the recovery to something more usefull than factory reset
Thank you if you have more and more ideas

Quick notes:
- THBK1 does NOT connect to PC/MAC
- THBK1 does NOT have USB Debug activated. The micro-usb is aimed to put a (normal) cable, not an OTG one nor a charging cable. You can reach ADB only over Wireless.
-> Currently trying TowelRoot with different parameters, but for now not successfull. Basically this is a 4.2.2 kernel so i could expect a low resistance at exploits, it worths to be tested

Good news, i was able to boot from an USB stick (with EFI), and while the MMC is not accessible, i found a trick to change permissions.
I have now full R/W support on EXT3 partition.
But sadly SU is not enough to gain root accesses.... damn.
Anyone able to find doc or explain how root access is triggered ?

I found an update, and i'm now able to flash the whole system partition. Sadly, i could not flash another update.zip, so i guess this is signed (and sadly it is).
I have also tryed z4root, towelRoot exploits, not working.
Basically i could somehow bypass the sign system in applying myself the content of the update.zip (as long as it deals with /data and /system files & perms). I'll try that for at least google apps.
edit: ok i have now play store and the whole google suite is working after a big playstore update (talkback, vocal syntgetisis and so on). Only google+ is FCing but it should only be a matter of installation. I should remove it and reinstall it from the market.
Only thing missing is root
Status on Android forum side: http://forum.xda-developers.com/android/help/hacking-thbk1-10-getting-root-t2804631/post53896017

As today, the tablet is now rooted. It works flawlessly.
Next step is the handling of recovery to flash non-signed zip files. It would ease the process of installing GAPPS or rooting the tablet.
But i'll take a break before
TODO list, from top to crazy:
- recovery
- test and deploy various system tweaker sur as Xposed framework
- bugfix vibrator (only working when you hit Windows button, not in apps)
- new rom, new kernel

Here is the actual partition layout:
Code:
Model: MMC BIWIN (sd/mmc)
Disk /dev/mmcblk0: 30.9GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 269MB 268MB fat16 ANDROID!bootloader boot, hidden, legacy_boot
2 269MB 337MB 67.1MB ANDROID!panic
3 337MB 873MB 537MB ext4 ANDROID!factory
4 873MB 2484MB 1611MB ANDROID!fake
5 2484MB 2618MB 134MB ext4 ANDROID!config
6 2618MB 4229MB 1611MB ext4 ANDROID!cache
7 4229MB 5303MB 1074MB ext4 ANDROID!logs
8 5303MB 7450MB 2147MB ext4 ANDROID!system
9 7450MB 11.7GB 4295MB ext4 ANDROID!data
10 11.7GB 11.7GB 1049kB ANDROID!misc
11 11.7GB 11.8GB 33.6MB ANDROID!boot
12 11.8GB 11.9GB 134MB ANDROID!recovery
13 11.9GB 11.9GB 33.6MB ANDROID!droidboot
14 11.9GB 12.3GB 315MB ntfs Basic data partition diag
15 12.3GB 12.5GB 273MB fat32 EFI system partition boot
16 12.5GB 12.7GB 134MB Microsoft reserved partition msftres
17 12.7GB 30.9GB 18.3GB ntfs Basic data partition msftdata
I'm not able to read the partition w/o filesystem (2, 4, 10, 11, 12, 13).
I tryed with yaffs2, but i'm not able to see them (and since it is not MTD...)
I'm working on dd image of the 32Gb MMC.
In example, hexdump of partition 12 shows it is a kernel. Certainly the recovery kernel directly flash, i should dig this.

Guide: installing Google Apps and Rooting the tablet
THIS POST IS DEPRECATED. See http://forum.xda-developers.com/showpost.php?p=55513404&postcount=23
:good: /!\ Please click thanks or offer me a coffee with donate if it was usefull for you /!\ :good:
This is rather technical, but i can help if you are stuck. Thank you for your comments.
Here is how you could install Google App suite to the THBK1-10 and certainly many ones based on Inside H2O bios, board name: CARD_B (see above for detailled specs)
Basically, to install some stuff, the concept is to get rid of all the caveats (special MMC drivers, EFI 32 bits with GPT, etc...) through actual Windows 8.1 installation. Everything takes place through classic Windows desktop. For convenience, personnally worked with TeamViewer, doing this with the dock/touchpad is pain in the ass. You can void your warranty and break the android part of your tablet, so operate carefully, i'm not responsible of what you do !
This leads to 3 phases:
a) accessing EXT4 Android partitions
b) transfer files from Windows to Android
c) change permissions
a) Accessing EXT4. I used coLinux to access and handle Android EXT4 partitions:
- download and install coLinux http://sourceforge.net/projects/colinux/files/latest/download?source=files. At the 'Choose components' screen, uncheck 'Root filesystem image Download', and accept everything (including TAP drivers)
- download and unzip Debian Squeeze image in coLinux folder (c:\program files\colinux). Warning, this leads to a 2Gb file, ensure you have proper space. You could unzip it in your external SDcard, but you would have to change the path to rootfs and swap in above squeeze.conf
http://sourceforge.net/projects/col... 6.0 Squeeze/Debian-6.0.1-squeeze.7z/download
- test it: click on the squeeze.bat file into c:\program files\colinux (if you have an error co-slirp, simply close colinux and restart it). Once you have the 'debian login:' prompt simply type root then enter. You are now under coLinux.
First, install your local keyboard (if needed)
Code:
apt-get update
apt-get install console-setup locales console-data
In case you miss the point for the keyboard:
(choose select keyboard from full list / pc azerty or whatever...)
Code:
dpkg-reconfigure console-data
- you should now update your /etc/apt/sources.list file:
Code:
nano /etc/apt/sources.list
- fill with the following lines (remove all before)
Code:
deb http://ftp.fr.debian.org/debian/ squeeze main contrib non-free
deb http://security.debian.org/ squeeze/updates main contrib non-free
- update your apt repository:
Code:
apt-get update
- you would like to sync the clock from Linux with Windows: edit /etc/default/rcS and change UTC=yes to UTC=no
Code:
nano /etc/default/rcS
You can exit coLinux, we have things to tweak now.You can then download the attached Squeeze.conf, and put it into your colinux folder, replacing the old. Remember, if you have changed the path for rootfs and swap, you must change them to reflect your current installation.
Squeeze.conf:
Code:
kernel=vmlinux
cobd0="c:\program files\coLinux\rootfs_2gb.img"
cobd1="c:\program files\coLinux\\swap_128mb.img"
cofs0="C:\share"
cobd8=\Device\HarddiskVolume8
root=/dev/cobd0 ro
initrd=initrd.gz
mem=256
eth0=slirp
b) transfer files from Windows to coLinux
We would create a share folder at the root of C:\.
You must have C:\share folder.
- Create a directory in /mnt
Code:
mkdir /mnt/win
- then mount the folder into your coLinux
Code:
mount -t cofs cofs0 /mnt/win
FOLLOW THE ABOVE ONLY FOR GAPPS:
- You must now download the google apps files. The operation is done under Windows:
download Android 4.2.2 ones: http://goo.im/gapps/gapps-jb-20130812-signed.zip and extract all the file into C:\share
This folder must contains the whole gapps (you 'll see folders named: system, META-INF, optional...).
You must directly DELETE 3 files and 1 folder:
file system\app\GooglePlus.apk
file system\app\LatinImeDictionary.apk
file system\lib\libjni_latinime.so
fodler system\tts
If everything is ok, browsing /mnt/win/ from coLinux (not windows)
Code:
ls /mnt/win
should show the share directory content (META-INF,system,optional,...).
FOLLOW THIS ONLY IF ROOT:
- You must now copy su binary to your tablet: download attached files, unzip, copy it to your windows desktop shared folder
Nota: this file is extracted from Koush' superuser APK. This is the x86 su binary. Feel free to replace with newest version if available or if you fear something
FOLLOW THIS IF ROOT & GAPPS
c) access to Android partition
- create a system folder in /mnt
Code:
mkdir /mnt/system
- mount android to system
Code:
mount /dev/cobd8 /mnt/system
- check you are ok with
Code:
ls /mnt/system
You must see app, bin, usr, etc .... folders.
*** at this point, /mnt/system contains ALL your android system. NO MISTAKE ! ***
FOLLOW THIS ONLY IF GAPPS
- part 1: removing files. Browse to /mnt/system/app and CAREFULLY delete the 8 files (some could be missing, don't bother):
Code:
cd /mnt/system/app
rm Provider.apk
rm Provider.odex
rm QuickSearchBox.apk
rm QuickSearchBox.odex
rm SetupWizard.apk
rm SetupWizard.odex
- part2: copy. Copy the files from Windows to Android - it could take up to 2 minutes -
Code:
cp -rp /mnt/win/system/* /mnt/system
- then fix the permissions:
Code:
chmod -R 755 /mnt/system/addon.d
chmod 755 /mnt/system/app/*
sync
At this point, this is over. You can exit from colinux, reboot to Android, and come back to windows uninstalling coLinux, if anything is ok
The whole GAPPS are installed. Enjoy !
FOLLOW THIS ONLY IF ROOT
- copy attached x86 su binary to android
Code:
cp -p /mnt/win/su /mnt/system/bin
- then fix the permissions:
Code:
chmod 755 /mnt/system/bin/su
chmod u+s /mnt/system/bin/su
ln -s /mnt/system/bin/su /mnt/system/xbin/su
sync
At this point, this is over. Reboot, you can now download and install superuser https://f-droid.org/repository/browse/?fdfilter=superuser&fdid=com.koushikdutta.superuser
Your tablet is now rooted. Enjoy !

Know clones (feel free to help):
- Danew i1012 dual boot (strictly identical to Thbk1)
- VOYO A1 (Windows 8 only).
- Cube U100GT (Windows 8 only)
Certainly clones:
- Ramos i10 pro (dual boot)
- Pipo W1 / Work W1 (Windows 8 only)
- ColorFly i106 (Windows 8 only)
- Toshiba WT8-AT01G (Windows 8 only)

Graveen said:
Know clones (feel free to help):
- Danew i1012 dual boot (strictly identical to Thbk1)
- VOYO A1 (Windows 8 only).
- Cube U100GT (Windows 8 only)
Certainly clones:
- Ramos i10 pro (dual boot)
- Pipo W1 / Work W1 (Windows 8 only)
- ColorFly i106 (Windows 8 only)
- Toshiba WT8-AT01G (Windows 8 only)
Click to expand...
Click to collapse
Considering getting a voyo a1 or a pipo w2. But 99% of my interest in windows 8 tablets is running old windows games on them. What's your experience with win 8 and older games for windows? Touchscreen make anything unplayable? Thinking old command and conquer or Warcraft 1-3 etc. With some RPG thrown in.
I hate the idea of being limited to just windows, but I'm hesitant to spend too much on what might not work like I hope.

StridAst said:
Considering getting a voyo a1 or a pipo w2. But 99% of my interest in windows 8 tablets is running old windows games on them. What's your experience with win 8 and older games for windows? Touchscreen make anything unplayable? Thinking old command and conquer or Warcraft 1-3 etc. With some RPG thrown in.
I hate the idea of being limited to just windows, but I'm hesitant to spend too much on what might not work like I hope.
Click to expand...
Click to collapse
Honestly,i installed Steam and played some to test. But, alas, it is not successfull. If you can wire a BT pad, let's say it is ok, but else, generally, the touchpad is not suitable, really.
Of course some point'n clic games should work nicely. But except theses, you 'll be forced to add keyboard/mouse. Or, as i mentionned, a bluetooth gamepad, with some keyboard mapping, such as XPadder, could work fine.

Graveen said:
Honestly,i installed Steam and played some to test. But, alas, it is not successfull. If you can wire a BT pad, let's say it is ok, but else, generally, the touchpad is not suitable, really.
Of course some point'n clic games should work nicely. But except theses, you 'll be forced to add keyboard/mouse. Or, as i mentionned, a bluetooth gamepad, with some keyboard mapping, such as XPadder, could work fine.
Click to expand...
Click to collapse
So basicly, the hardware ran things OK, but the interface sucks, oh well. Probably not worth the headaches of dealing with windows again. I'd imagine it's a real PITA to fix things if it gets a virus.

StridAst said:
So basicly, the hardware ran things OK, but the interface sucks, oh well. Probably not worth the headaches of dealing with windows again. I'd imagine it's a real PITA to fix things if it gets a virus.
Click to expand...
Click to collapse
Like a windows. The 'dock' is allowing light computer use, and Office 2013 home is shipped for free with the tablet. But yeah, Windows legacy is the key when dealing with windows

Hey mate,
I have one of these - http://www.ebay.co.uk/itm/390900023783?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
are you implying that I should be able to get it to dual boot Windows and Android following your guide?
Thanks
Karl

Hello Karl,
Yes it should be possible if strictly identical.

Increase data space with Link2SD
You can dedicate a part of external SD to increase /data size. Link2SD is ok for this, and will, in the free version, allows you to move APK to external partition.
Your tablet MUST be rooted !
1) ensure you have a FAT32 partition (primary, 1st position)
2) ensure you have an EXT2 or EXT4 partition (primary, 2nd position)
3) install Link2SD https://play.google.com/store/apps/details?id=com.buak.Link2SD
You can now use Link2SD which 'll create links and move your APKs to your new EXT partition.
Personnaly, i have a 32Gb SD with 24Gb FAT + 8Gb EXT4 partition.

Increase data space with Link2SD : Good news !!! You are the Boss. THNK1-10 is available at Carrefour (an another good news)

Time is changing between windows and Android
You can simply set timezone to GMT+0 and disable network time.
On Debian, you set UTC to YES, but need to seek where it takes place in Android.

bu3304 said:
Increase data space with Link2SD : Good news !!! You are the Boss. THNK1-10 is available at Carrefour (an another good news)
Click to expand...
Click to collapse
carrefour or conforama.
thomson carrefour and /danew in conforama.
even saw on internet that MSI is also having this tablet and just sticking there logo on it. atleast looked like this tablet.
---------- Post added at 12:05 AM ---------- Previous post was at 12:01 AM ----------
hum. i think i will go for the new asus transformer book t100 with atom z3775 processor.
i like the battery life of the asus.
but prefer the acer switch 10 in terms of look and the magnetic dock
but yeah choice of 11 hours of battery or 8. makes a difference
and the new 3775 or 3745. cpu