It appears that Adreneline and Supercharger V6 perform similar functions.
Any thoughts on which is better (if either is better) and why?
hgoldner said:
It appears that Adreneline and Supercharger V6 perform similar functions.
Any thoughts on which is better (if either is better) and why?
Click to expand...
Click to collapse
I Like adrenaline better because you can flash it and be done with it. instead of having a script manager using a service which uses battery. IMO
synisterwolf said:
I Like adrenaline better because you can flash it and be done with it. instead of having a script manager using a service which uses battery. IMO
Click to expand...
Click to collapse
Not quite on the supercharger part. You run the script once, and it saves to the init.d and you're good. Script Manager doesn't need to be running all the time.
PonsAsinorem said:
Not quite on the supercharger part. You run the script once, and it saves to the init.d and you're good. Script Manager doesn't need to be running all the time.
Click to expand...
Click to collapse
Oh i didnt know how it worked. i thought script manager had to turn it on with every boot. thank you.
Right now I have the following init.d scripts:
00cpufreq_modules (comes from tiny's kernel, I believe)
77sdcardspeedfix (adreneline takes it up to 3048, I keep it at 512)
94fastcharge (also associated with kernel, I think)
94incredicontrol (likewise, looks like I need to change the number!)
S97ramscript (Juwe's RAM script)
Adrenaline appears to include some of these; Supercharger appears to modify init.rc and build.prop.
And that's all I can figure out on my own so far.
V6 for me. Has a lot of options to tweak, plus it's easy to undo and redo (when flashing a new kernel, etc.).
hgoldner said:
Right now I have the following init.d scripts:
00cpufreq_modules (comes from tiny's kernel, I believe)
77sdcardspeedfix (adreneline takes it up to 3048, I keep it at 512)
94fastcharge (also associated with kernel, I think)
94incredicontrol (likewise, looks like I need to change the number!)
S97ramscript (Juwe's RAM script)
Adrenaline appears to include some of these; Supercharger appears to modify init.rc and build.prop.
And that's all I can figure out on my own so far.
Click to expand...
Click to collapse
Best way to learn is to open them up in a text viewer and read what they do. The 94 one is redundant. Fast charge turns on fast charge, where Incredicontrol turns on fast charge and audio boost. They can have the same number, but in this case they're overlapping and it's pointless to have both.
So only use one of them?
Sent from my ADR6300 using XDA App
Erisnoob said:
So only use one of them?
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Only use one of what? The two 94 scripts? You can have both, it doesn't hurt, but you don't get any added benefit. So, the question is, do you want only fast charge (use fast charge and delete Incredicontrol) or do you want both fast charge and audio boost (use Incredicontrol and delete fast charge).
Thanks, I was talking about adrenaline or v6 tweaks. From the mods thread it was a little muddy on whether or not to use both. Thanks again.
Sent from my ADR6300 using XDA App
Erisnoob said:
Thanks, I was talking about adrenaline or v6 tweaks. From the mods thread it was a little muddy on whether or not to use both. Thanks again.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
If I remember right, those are sort of overlapping again, but not quite to the point of redundancy as the 94 scripts mentioned above. Both have RAM tweaks, of which you only need one of. I think V6 would take precedence if both were used. But adrenaline has some stuff that V6 doesn't have, and vice versa. Both should be able to be safely used together, but there is a lot of wasted motion.
And that uses up my allotted number of helpful/informative posts here, so now I'm going back to my #Occupy forum.
synisterwolf said:
I Like adrenaline better because you can flash it and be done with it. instead of having a script manager using a service which uses battery. IMO
Click to expand...
Click to collapse
after taking the time to rip apart V6 and Adrenaline i found out that script manager is only used to view the script and not to run it for V6. you can use terminal emulator after you you told V6 to install to your system.
if you did what i said above all you need to do is type
Code:
$ su
# bash V6
its will put a script into init.d and do some build.prop tweaks. i have been running both mods for 3 days now with no problems. ( every phone is different)
for me i chose the option 6 the "leaded under 512hp" along with adrenalin its been super smooth. i would also suggest to do the mods after you have done a clean wipe if you are on CM7 nightly.
there are some redundancies to having both mods but to avoid this if you flash the older universal adrenaline without the rams script, version 9, you will avoid using 2 rams scripts. i hope this helps anyone out there reading this.
PonsAsinorem said:
Only use one of what? The two 94 scripts? You can have both, it doesn't hurt, but you don't get any added benefit. So, the question is, do you want only fast charge (use fast charge and delete Incredicontrol) or do you want both fast charge and audio boost (use Incredicontrol and delete fast charge).
Click to expand...
Click to collapse
Interestingly, I removed the 94fastcharge and the 94incredicontrol failed to "stick". I removed the 94incredicontrol (I don't care about audio boost) and the fastcharge script always sticks. Go figure.
hgoldner said:
Interestingly, I removed the 94fastcharge and the 94incredicontrol failed to "stick". I removed the 94incredicontrol (I don't care about audio boost) and the fastcharge script always sticks. Go figure.
Click to expand...
Click to collapse
It should. Odd. Maybe because it's the second line, but that shouldn't matter. I'll have to experiment and switch aboost with fast_charge_USB and see if that sticks.
Related
I am trying to figure out the best setting for the rom. I am only getting like 6 to 8 hours on my phone. When I've seen others get close to 24 with light to moderate use. Like I stated in the Title The rom is Dewizzed 2.0, and I know the some people have the same rom while using tuner pro. I would ask the dev in the devolpment section, but I don't have permissions to do so. Also Hello everyone in xda. I am a long time visitor since the G1 days. I made this account a long time ago, but recently got tired of touchwiz, and decided to give it the boot lol.
from what I have heard... for dewizzed... if you use Faux, just flash gideon's script you might want to bump the clock just a bit over 1ghz to make it smoother... i believe synergy kernel works really well with dewizzed from the getgo (haven't tried it i get good results from faux).... if using gideon's script.. don't use a cpu tuner, you want to manually adjust the values in the script.
Teo032 said:
from what I have heard... for dewizzed... if you use Faux, just flash gideon's script you might want to bump the clock just a bit over 1ghz to make it smoother... i believe synergy kernel works really well with dewizzed from the getgo (haven't tried it i get good results from faux).... if using gideon's script.. don't use a cpu tuner, you want to manually adjust the values in the script.
Click to expand...
Click to collapse
See this is where I seen people on here talk about scripts. While yes I hear great things about it. I'm pretty stupid in to what it it, does, or how to apply lol. As to say why My idiot self uses setcpu, but apparently setcpu gets stuck on conservative which was creating a noticeable lag. Which in turn lead me to tuner pro. Which in turn leads me to look for the appropriate settings I want. Just don't know how to achieve that. Things sure have changed since the G1. -sigh- Sorry if I'm more of a pain in the bottom. :\
Sent from my SGH-T989 using xda premium
scripts are basically tweaks to your phone. They're PreProgrammed tweaks that runs when your phone is booted.
Basically gideon's script controls your phone's clockspeed and voltages without the need of a 3rd party app. Therefore when running tuner pro it overrides the script... go to faux's kernel thread... it's in the 3rd post. You flash the script through cwm.. check out synergy's thread for its own configuration.. i haven't really checked it out yet (i should)... heard great things about that kernel
Here is a link to Gideon's scripts. Before you flash them uninstall system tuner, and wipe cache and dalvik. I suggest putting the revert script on your sd card also. In case your phone doesnt like being under volted. You can boot into recovery and flash the revert script.
http://forum.xda-developers.com/showpost.php?p=20946429&postcount=574
I am running Dewizzed 2.0 with Synergy kernel and using System Tuner Pro, 1.62max 384min, 384max and 192min with screen off and am not UV because Synergy is already UV. Getting well over 21 hours of use, light to moderate usage,
Sounds like you have a app that is using a lot of battery.
Teo032 said:
scripts are basically tweaks to your phone. They're PreProgrammed tweaks that runs when your phone is booted.
Basically gideon's script controls your phone's clockspeed and voltages without the need of a 3rd party app. Therefore when running tuner pro it overrides the script... go to faux's kernel thread... it's in the 3rd post. You flash the script through cwm.. check out synergy's thread for its own configuration.. i haven't really checked it out yet (i should)... heard great things about that kernel
Click to expand...
Click to collapse
Thanks for helping this Dummy out with the scripts bro. When I flash dewizzed 2.0 again. Ill flash gideon right over it.
Sent from my SGH-T989 using xda premium
GreggoryD502 said:
Here is a link to Gideon's scripts. Before you flash them uninstall system tuner, and wipe cache and dalvik. I suggest putting the revert script on your sd card also. In case your phone doesnt like being under volted. You can boot into recovery and flash the revert script.
http://forum.xda-developers.com/showpost.php?p=20946429&postcount=574
Click to expand...
Click to collapse
Thanks bro for the revert script. Will definitely check that out. Thanks for the replies, but when I was up last night. My phone said 15% before I left my room to talk to someone came back say 15-20 min. It was dead and I had just did a reboot at that time. :/
Sent from my SGH-T989 using xda premium
adclem said:
I am running Dewizzed 2.0 with Synergy kernel and using System Tuner Pro, 1.62max 384min, 384max and 192min with screen off and am not UV because Synergy is already UV. Getting well over 21 hours of use, light to moderate usage,
Sounds like you have a app that is using a lot of battery.
Click to expand...
Click to collapse
If so battery management hasn't been reporting it running. Could It be social hub? I only Facebook other hour. Sync is always once a day. As well as managing my settings.
Sent from my SGH-T989 using xda premium
Which one is MOST suggested?
1. Use the V6 script by zeppelinrox?
OR
2. Install RAM Manager app?
P/S : Does anyone knows how to un-supercharge the V6 script? PLEASE help me!
SyzwnFrzRdz said:
Which one is MOST suggested?
1. Use the V6 script by zeppelinrox?
OR
2. Install RAM Manager app?
P/S : Does anyone knows how to un-supercharge the V6 script? PLEASE help me!
Click to expand...
Click to collapse
If you look at the options available at the number input stage, one of these can remove supercharge settings.
I prefer ro zeppelinrox's v6..it's more reliable..
sent from another space
I dont know its hard to say. Ive used the v6 on 3 roms and its abit of a does it or does it not. Plus its hard to say. But it does free up some memory from looking at task manager it was always between 180 and 200mb of ram which is good.
At the minute im using ram manger and the ram is up around 220 to 250 but smooth just have it on normal balance setting.
Everyone is going to have their favorite's. I personally found the v6 to be annoying when setting it up and trying to get it 100% sc. But it seemed to work at the end of the day so cant argue.
A tricycle is easy to ride and is for kids.
And that app is a a tricycle, missing a wheel, and pretending to be a ferrari - it does nothing for the launcher or multitasking and you have to pay for the third wheel.
You can get the same effect as that app with autokiller or auto memory manager - for free.
I do have the V6 script in my phone now so based on your replies guy, i guess i'm gonna stick with the script instead of the RAM Manager.
@Zeppelinrox,
If i am to un-supercharge the script, the data of V6 is still in the phone, right? Where is it located then? Thanks!
If you unsupercharge the only thing left on the phone itself is nothing
But all the files stay backed up on the sd card for easy re-resupercharging
zeppelinrox said:
If you unsupercharge the only thing left on the phone itself is nothing
But all the files stay backed up on the sd card for easy re-resupercharging
Click to expand...
Click to collapse
I mean where are the backed up files? And is there any steps for re-supercharging? Thanks!
A tricycle huh..?and pretended to be a Ferrari..haha..
@snwman
Dude,v6 is not like bunch of cosmetic app where u can found on market that is easy to ride ..v6 is a script and it's solid like hell..its not how much u can free up ur memory,it's about managment..and it's free,!!!!
But whatever suite u well,its up to u..so..happy riding..
sent from another space
I'd like to know if anyone running the script on the SGW has had problems with the stock browser, particularly trying to open more windows/tabs. I realised the moment I opened a second tab the the phone froze while opening the web page and took several minutes before killing the browser. I've never had problems with tabbed browsing so its certainly linked to the V6 aggresive memory management. I'm also aware the browser can use up huge RAM(upto 100MB and over) depending on how many and how big the web pages you are opening. Any help here would be welcome.
PS: I'm running the RC6 Version of the script.
Sent from my GT-I8150 using XDA App
As in topic. Im looking for any enhancements form my xperia play such as increasing size of ram, applications memory or sth like that. I didnt put it in offtopic cos i dont think that it is offtopic. Please move my topic if u think different.
Two things I would definately recommend.
1: V6 SuperCharger
2: Xperia PLAY Tweaks from this thread....
http://forum.xda-developers.com/showthread.php?t=1456777
Between those two and some build.prop tweaks my phone just screams... And dont forget ROOT..... move all your apps to SD via Titanium Backup
You cannot make ure Ram or anything bigger by replace hardware just optimise with software
Sent from my R800a using XDA
Ram Is Fixed To a Certain Size eg plays is 512mb I believe,
Jgregory Is right V6 and others Make Your Phone mental
jgregoryj1 said:
Two things I would definately recommend.
1: V6 SuperCharger
2: Xperia PLAY Tweaks from this thread....
http://forum.xda-developers.com/showthread.php?t=1456777
Between those two and some build.prop tweaks my phone just screams... And dont forget ROOT..... move all your apps to SD via Titanium Backup
Click to expand...
Click to collapse
do I need an unlocked bootloader for the V6 supercharger? and what does that tweak do? No one in that thread knows :S
GetPatriotized said:
do I need an unlocked bootloader for the V6 supercharger? and what does that tweak do? No one in that thread knows :S
Click to expand...
Click to collapse
No you do not need a unlocked BL. Just need root and busybox and script manager. But honestly just get your bootloader unlocked. It's worth the 24$.
Potato13 said:
No you do not need a unlocked BL. Just need root and busybox and script manager. But honestly just get your bootloader unlocked. It's worth the 24$.
Click to expand...
Click to collapse
What's script manager?
How does it work though? Do they add something to the hardware or is it software based? :S If it's software why can't I do it for free?
GetPatriotized said:
do I need an unlocked bootloader for the V6 supercharger? and what does that tweak do? No one in that thread knows :S
Click to expand...
Click to collapse
Its much easier to use Ram manager app. I found it seams to do more for our play's we have. Then Supercharger V6 and a lot easier to set up when you want different setting's. We just wondered why the supercharger dev never made his script into an app instead of using script manager. This is really what ram manager did. All you need is root.
hope this helps as is another option.
GetPatriotized said:
What's script manager?
How does it work though? Do they add something to the hardware or is it software based? :S If it's software why can't I do it for free?
Click to expand...
Click to collapse
Script manager runs written coded scripts that change things written in your device's code.
Supercharger is software based. All it add's is some build.prop tweek's really and tells you device to kill running background apps like a hardcore version of Advanced Task Killer
I already have ram manager pro,running the script for V6 supercharger now.
What scrolling speed should I select as mentioned in the V6 Thread?
Thanks
ShahinTehShiz said:
What scrolling speed should I select as mentioned in the V6 Thread?
Thanks
Click to expand...
Click to collapse
Really? The scrolling speed is what speed the text is going move in Script Manager. If you're having problems that early on with the options, good luck getting the rest of it set up.
I would seriously recomend doomlord's doomkernel. It supports over clocking. I'm loving it at 2Ghz. I ran v6 but in all honesty I didn't notice a difference what so ever. I'm actually doubting wether it does anything at all.
CodenameZeus said:
I would seriously recomend doomlord's doomkernel. It supports over clocking. I'm loving it at 2Ghz. I ran v6 but in all honesty I didn't notice a difference what so ever. I'm actually doubting wether it does anything at all.
Click to expand...
Click to collapse
I have doomlord kernel and i can overclock it 2 2GHz too but it drains battery so much that it is pointless to do it.
Otherwise - thanks every1 for help especially jgregoryj1 and poo-tang
super charger 100% does work look at the ram games such as six guns seem to work way better with little to no lag, before i used super charger this game was unplayable
CodenameZeus said:
I would seriously recomend doomlord's doomkernel. It supports over clocking. I'm loving it at 2Ghz. I ran v6 but in all honesty I didn't notice a difference what so ever. I'm actually doubting wether it does anything at all.
Click to expand...
Click to collapse
I used v6 with the diehard launcher and super UL for 512 mb of ram for my phone and that made my phone noticeably faster
V6 Supercharger on Stock SE ROM ?
Hi guys,
I noticed some of you in this thread are having excellent results with V6 Supercharger script.
I tried to install this script on my XPeria Play R800i under Stock SE ROM 2.3.4 without success.
Frozen screen on reboot and recovery through ClockWorkMod to get it up again.
Do you use the V6 Supercharger on stock ROM or on a custom ROM ?
Thanks for your answers,
Hi there,
As nobody answered my call so far, I come back to give feedback on my own experience.
I tried again to install the V6Supercharger Script and manage to get through this time.
The first time, I guess I simply did not wait enough time.
In fact, I had to wait like almost 10 minutes on the Sony-Ericson XPeria logo (after the boot animation) before my phone came back to life.
It can be quite stressful so just be prepared !
After that, I went through the pin code entry screen and found out some of my widgets did not properly load and some applications were not showing up.
Therefore, I rebooted and everything went fine on the second time. All the apps showed up properly (only mixed up in the scrolling app section).
Launching the script again, it confirmed my phone was 100% supercharged with the following settings (script previously set as root, run at boot):
- DieHard launcher
- Rock&Roll Kernel
- Miscellaneous tweaks and 3G enhancement installed
- 512HP setting with V6 CustOOMizer option
- Minfrees set at 8, 12, 40, 47, 55 and 62MB
with 367MB of Ram (is this correct for the XPlay ?).
This was applied on the Sony Ericsson stock ROM 2.3.4 and the stock Kernel.
The first impression was that the scrolling between various home displays was faster.
I started Dead Trigger, running correctly (maybe just a bit slower, not sure) and when I exited the game, I had almost no Redraw time to wait.
Before V6 Supercharger, I used to wait around 5 seconds before all the icons were there again and I could scroll.
This time, the icons were right there and the scrolling hesitated for maybe 1 second but got super smooth again right after that.
Ok, this is to share my experience with you, guys.
No idea if anyone has experience on the XPlay ? Maybe using other settings ?
As there is a clear note that this script is not intended for heavy gamers, it tends to indicate it should not be really used on the XPlay, mainly used by heavy gamers.
What is your opinion on that ?
Cheers,
Please read the entire OP
DISCLAIMER:
I am NOT responsible for anything YOU do that causes damage to your device. Follow the instructions to TEE and there won't be any problems.
Your ROM/kernel MUST support init.d scripts
How do you know if your kernel supports init.d scripts? There are a number of ways to check, but the best way is to ask the developer of that kernel. You can also check in the ROMofCHOICE.zip by navigating to /system/etc/init.d. If the original .zip of your ROM has an init.d folder with scripts in it, then you are good to go.
What is Lightning Zap!?
Lightning Zap! is a set of tweaks that I have written and compiled to make the LG Nitro Lightning fast, super smooth, and contain excellent battery life!
I have used these same tweaks on devices like the Samsung SGS4G, Samsung Captivate, Samsung Skyrocket, Samsung Blaze, Sony S Tab. I have also assisted others with adding Lightning Zap! to their devices such as the Nexus S and various HTC devices. They have been proven time and time again to add amazing improvements to all devices.
What's the difference in the various version I find of Lightning Zap! when I google it?
Simply put, all devices are setup, formatted and created differently.
What's included in Lightning Zap!:
Battery tweaks for awesome battery life
Governor tweaks for amazing speed and performance without sacrificing battery life
Kernel tweaks
Memory and Ram tweaks
Cleaner tweaks
Build.prop tweaks
Internet speed tweaks
and MORE!
I used ParanoidAndroid ROM to test these tweaks. Although I have used the tweaks from froyo to jellybean, the the mounts, on some devices, are sometimes different as well as some kernel differences on each android version. If you are using a different ROM, feel free to test and post your results in this thread.
Install instructions:
Make a backup and then backup your data with titanium or something alike
***Download link is at the bottom of this post***
Download Lightning Zap! v1.zip to pc (Can be downloaded to sdcard also)
Place Lightning Zap! v1.zip on sdcard
Flash
Allow phone to set for 10 minutes after reboot
Enjoy
Confirmed ROMs & kernels
This space is going to be used to track the ROMs and kernels people have tested and confirmed Lightning Zap! installs and functions correctly.
Gningerbread:
ICS:
Jellybean:
ParanoidAndroid
CM10
Miui 2.9.27
CodeNameAndroid
I'm also adding some helpful tips on how to test Lightning Zap! to get the most positive results.
Testing option 1:
After flashing Lightning Zap!, download SManager from the market, navigate to /system/etc/init.d
Press menu key/more/advanced options/mount /system as rw and click ok
Press on each script individually then a ui will come up
In the ui, tap the icon at the top that is a skull and cross bones (has SU under it) then tap run.
An output will be displayed. Note the output for errors and report errors to me. Please use pastebin.com to upload your outputs
Testing option 2:
Plug phone into pc, open a terminal/command prompt and type each command individually
adb shell
su
cd /system.etc.init.d
Now type the file name of each tweak individually, eg:
01governor
Now note each output that is displayed and look for errors
If errors exist, report errors to me. Please use pastebin.com.
There may be some errors that exist that are not true errors. I know what they are, but haven't noted them yet.
If you have failures, please get them to me as soon as you can so I can fix it
FYI, since I installed Lightning Zap! on my wife's Nitro, she is at 100% with light use at 4.5 hours... I know it is not a normal day for her as she uses her phone much more than what she is using it today, but this is just to give users an idea of how great my scripts are. Typically on my S2 Skyrocket I get about 30 hours under moderate use (many texts from my wife, 5-10 calls, 30-45 minutes of web browsing, etc.) on a single charge...
More improvements and tweaks
The governor tweak is set pretty high for performance. If you find yourself needing battery life over performance, you can make some minor changes. Here's how:
1 Download Script Manager from the market (it's free)
2 Open Script Manager and navigate to /system/etc/init.d
3 Press menu/more/advanced options and select mount as RW
4 Select 01governor and select "edit" at the top (this will open the file in atext editor)
5 Change:
Code:
echo "45" > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold;
To:
Code:
echo "[COLOR=red]70[/COLOR]" > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold;
6 Select menu/save
7 Press the skull and cross bones icon at the top (this will allow Super User)
8 Press run, close app and enjoy
This will result is slightly slower performance but higher battery life.
If you want even better battery life:
1 Following steps 1-4
2 Add a # at the begining of lines 11 to 19
3 Scroll to "pwoersaver" section
4 Remove the # at the begining of lines 28, 30-38 and 43
Code:
#AWAKE_GOVERNOR="ondemand"
#SLEEP_GOVERNOR="ondemand"
# echo "70" > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold;
etc
Code:
AWAKE_GOVERNOR="powersaver"
#SLEEP_GOVERNOR="powersaver"
echo "20000" > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate;
5 Follow steps 6-8 (no need to select super user icon if you already did)
This will result in lower performance, but ultimate battery life
When running in a higher performance mode (especially for gaming) you can disable powersave_bias by changing the 1 to a 0 like this:
Code:
echo "1" > /sys/devices/system/cpu/cpufreq/ondemand/powersave_bias;
echo "[COLOR=red]0[/COLOR]" > /sys/devices/system/cpu/cpufreq/ondemand/powersave_bias;
Powersave_bias only allows the CPU to peak for small increments at a time, and not allow the CPU to remain peaked even when the system calls for it. In gaming, that could result in choppy, laggy perofrmance and slow FPS..
Although it says not to in the script, you can change the sampling rate as well. Do not go below 50000. I left it at 57500 as I found this seems good setting for smooth scrolling and performance.
Code:
echo "[COLOR=Red]57500[/COLOR]" > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate;
Always leave SLEEP_GOVERNOR="powersave" uncommented (no #) and do not uncomment any other SLEEP_GOVERNOR as this will keep ultimate battery save while screen is off.
Only change values in increments of 5 for the up_threshold.
I am not resposible if you do something wrong. Make a back up just in case.
Working on CM10 latest nightly. Noticing a slight speed up. Will keep an eye on battery and post back if I notice any notable changes. Thank you!!
Sent from my LG-P930 using XDA Premium HD app
Can i use it with official miui?
Jl6owa said:
Can i use it with official miui?
Click to expand...
Click to collapse
You should be able to, but like i said in the op, i need you guys to help me test. At worst, you will have to reflash your Rom and gapps... make sure you backup your data too...
Please report back with your results...
When i get home, i will post some testing tips for you guys also...
Sent from my SGH-I727 using xda app-developers app
Thanks for supplying this! I'll have time to make these changes tomorrow and hope to see great improvements.
Sent from my LG-P930 using xda app-developers app
AllstarE4 said:
Thanks for supplying this! I'll ha e time to make these changes tomorrow and hope to see great improvements.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
Are you building from source? If so, you can add many of the values straight into the kernel. I haven't looked at the Nitro's source, but I can still somewhat guide you on how to make a Lightning Zapped! kernel where the tweaks work MUCH better than going thru scripts...
thomas.raines said:
Are you building from source? If so, you can add many of the values straight into the kernel. I haven't looked at the Nitro's source, but I can still somewhat guide you on how to make a Lightning Zapped! kernel where the tweaks work MUCH better than going thru scripts...
Click to expand...
Click to collapse
Oh heck no. I'm still a noob. I'm pretty good at following instructions though. Lol
Does SQLite Editor work the same? Can I perform all those changes with it or do I need the other app mentioned?
Sent from my LG-P930 using xda app-developers app
Jl6owa said:
Can i use it with official miui?
Click to expand...
Click to collapse
It works fine with miui. Phone become little more faster.
+500 points in antutu
Jl6owa said:
It works fine with miui. Phone become little more faster.
+500 points in antutu
Click to expand...
Click to collapse
Which version of MIUI?
Anyone tried it on Full Throttle 8.4
I'm not proficient enough so I want to hear if other Full Throttle 8.4 finds this working for them.
Jl6owa said:
It works fine with miui. Phone become little more faster.
+500 points in antutu
Click to expand...
Click to collapse
Want to raise your scores even higher, refer to the second post but lower the up_threshold to 15. Of course this will take from your battery life, but it will seriously enhance your performance. You can also change powersave_bias, io_is_busy, down_differential, ignore_nice_load to "0" and play with sampling_rate a bit too... Keep in mind, the more you add performance, the less battery life you will have...
AllstarE4 said:
Oh heck no. I'm still a noob. I'm pretty good at following instructions though. Lol
Does SQLite Editor work the same? Can I perform all those changes with it or do I need the other app mentioned?
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
Any text editor that supports shell scripting will work. As for adding this to a port, then it's as easy as adding files and a few entries in your updater-script...
Tried to install this on Full Throttle. Is it supposed to restart in the middle of flashing?
rsalan said:
Tried to install this on Full Throttle. Is it supposed to restart in the middle of flashing?
Click to expand...
Click to collapse
It does reboot itself as soon as it is done flashing... Since it rebooted, it flashed correctly...
Is full throttle ICS and how is it working for you?
thomas.raines said:
Which version of MIUI?
Click to expand...
Click to collapse
Miui 2.9.27
thomas.raines said:
It does reboot itself as soon as it is done flashing...
Click to expand...
Click to collapse
I get that you want to automate the process a bit, but I think it could be annoying in some cases. What if I wanted to do something else in recovery before rebooting? Just my personal opinion.
drumist said:
I get that you want to automate the process a bit, but I think it could be annoying in some cases. What if I wanted to do something else in recovery before rebooting? Just my personal opinion.
Click to expand...
Click to collapse
From my experience, when flashing tweaks, you want to reboot immediately after so they fully install. Same with ROMs, kernels and recoveries... Otherwise, you can cause gremlins to take over and corrupt your partitions...
thomas.raines said:
From my experience, when flashing tweaks, you want to reboot immediately after so they fully install. Same with ROMs, kernels and recoveries... Otherwise, you can cause gremlins to take over and corrupt your partitions...
Click to expand...
Click to collapse
Not true, but whatever. It's a minor point anyway.
VERSION 3.5
"My phone is flying!" - vgomez916
"My phone is lighting quick now, Like I said this thing is really flyin. Thanks"- zackandethan
"This mod is sickkk. phone is flying, on 3g i'm getting 1-2 mbs speed. Thanks for the mod Goddly."- Nyckrs
"My speeds are way up too. 100-200 kbs up to 850kbs now. Download and upload. Same time of the day, same location"- g_ding84
"4G speed jumped to 8.9MB. Incredible!"- xNicoyAx
Stock MF9 , with busybox workaround. http://forum.xda-developers.com/showthread.php?t=1933849 ~~ POST #2 ~~ thanks - devoureddreams-
This tweak pack Originated in the Epic 4G Touch Forums, been tested, and has improved-
Battery Life, User battery life may vary, depending on a varitey of things, widgets, radios, etc., etc.,
network speed
GPS lock
system performance, Increased app load speed, etc.
Browser upgrades
wifi_wait (Kobridge)
memory tweaks (Modded Kobridge, Mine)
test screenstate (screen off = deep sleep, Phakker, Improved)
Init.d test script (Exit_Only)
battery stats format (Exit_Only)
and more
V1.2
added Kobridge, read ahead script
added script for working Cron (Exit_Only)
added an option for NO Undervolt. (more universal)
cleaned up things.
v 1.3
stripped undervolt till a new kernel pops up.
cleaned up scripts, non working parts
added Kobridge 41 tweaks, modded for less conflicts , thanks Kobridge
and a few small touches
Version 2.1 Crossbreeder
]Added newest Crossbreeder to install package
Slightly modded GPS settings.
changed updater script to be compatible with the S4 and all other rooted Android devices
Version 3.0.2 ~
~added more init.d low memory tweaks
~added a few more small kernel tweaks
~swapped out the stock browser for my modded variation
~added a browser cache script (hoping to load browser pages quicker)
~added delay to the larger scripts (to speed up boot times)
~New~ Version 3.5
~Fixed loss of root issue
~added newest release of crossbreeder 12-4
~added a few new kernel tweaks
~cleaned up
Infromation About CrossBreeder-
- This is a new take at Android lag reduction. It's lightweight and won't consume battery. Users have reported drastic improvements in usability and even benchmark scores. It will show noticeable improvements - Android devices from Donut to Froyo to Gingerbread to Honeycomb to ICS and Jellybean.
- This is a combination of 5 different methodologies to reduce Android lag.
- Removal of DNS lag . A lot of the lag in a lot of apps, apart from the GUI lag, is due to slow DNS querying, specially on the mobile network.
- CrossBreeder now runs a caching, parallelising DNS client on the device. So now most of your DNS queries will be served from the cache and if not found, the query will be sent in in round robin fashion to multiple DNS servers including Google DNS, OpenDNS and your home router and the reply will be served to you, hot.
- This speeds up network access and networked apps, like Browsers of course, and Tapatalk, Gmail and thousands of others drastically. And removes a lot of the lag where it was due to DNS querying. This will not increase your network or download speed but pages will load much faster.
- This will future proof your devices as more and more apps start using HTML5 and/or reside completely as web pages or the like.-
I Just thought, there are some great developers in our forum, with great tweaks, geared for their own specific purpose, and i thank them. I HAVE asked for permission to use these tweaks, to make a pack of the best, from the best taking a few of those great tweaks and putting them in one lightweight package. Now , I did NOT create any tweak in this pack. That is why introductions and thanks are in order.
ALL THANKS TO THESE GUYS
Exit_Only - For being the mad scientist of the "tweak" in general
Kobridge - Having used your tweaks in various roms and knowing how great they work :good:
Phakker - For the use of his Infamous, screenstate tweak
G_Ding84 - For being one h*ll of a rom maker , teacher, and one of the most helpful guys youll meet on any forum
idcrisis - For the use of his CrossBreeder Mod found here -
http://forum.xda-developers.com/showthread.php?t=2113150
Without these guys we wouldnt be where we are now, as a forum, or a community.
Gentlemen- On behalf of the users of this tweak , and every E4GT owner out there.... *BOWS* I thank you....
I am in no way responsible for your equipment, flash at your own risk
Download ComaDose version you prefer, from the downloads section, and put on root of phone
Boot into custom recovery
Flash ComaDose
Reboot to rom (flash stock kernel) or reboot system etc.
This is a .zip file, can be flashed with CWM recovery, put on root of phones storage, boot into recovery & flash.
Issues with repack and new Custom Recovery kernels-
Now Ive heard it works for some people on repacks, and ive heard of battery drain, and GPS taking along time to lock on others. But the best results i get, are out of the "stock" Leak kernels.
Conflicting issues with new Custom Recovery modded and released updated version
~NEW~ComaDose V3.5
http://d-h.st/22v
md5: faae873f493540cd68e58f5ddc9ac79a
ComaDose V2.1 W/ Crossbreeder V. 7.2.13
View attachment 2149730
Mirror #1
http://www.androidfilehost.com/?fid=23060877490004661
ComaDose_removal.zip (Uninstaller)
View attachment 2149687
Mirror #1
http://www.androidfilehost.com/?fid=23060877490004662
Whats under this button??
If you guys like my work and have a little jingle floating around, dont hesitate to toss a beer (or coffee ) my way through the "donate to me" under my avatar. THANKS GUYS!
Test Init.d With The "21 Test-init.d" script
-THINGS YOU NEED-
Rom Toolbox (free or pro)
Root Access (superuser access) for Rom Toolbox
ComaDose Already Flashed
-Steps-
After ComaDose flash, if you want to check if your init.d is functioning properly you can check it with the 21 test init.d script...
After flash the test init.d script has already ran (on startup) now thwe sole purpose of this script is to show whether or not init.d
is properly functioning.
When this script is ran (executed) as all scripts in init.d are upon startup, it creates a file in the /data folder.
so why dont we take a look for it?
Using Rom Toolbox, go to the "root browser" tab (upon first startup youll be prompted to SuperUser permissions, Allow this)
Once in Root Browser youll be in the root of your device by default. ( / )
Click on the "Data" folder..
In the /Data folder, were looking for "Exit Only Init.d" file
if you see this file, your init.d is working and all scripts are running ...
If you dont see this file after reboot (post flash) you can execute the "21 test Init " script manually...
back out to the root of the phone, go into "system", then into "etc" then into the "init.d" folder and locate the "21_testinit.d" script, press on it , bringing up this menu.
press the "open as" tab, bringing up this menu...
then press the "script file" option..
Then you want to press the "execute Script" option, making sure the "execute as root option is checked, as shown below.
which will then execute the script using init.d support to do so.. looking like this
after its executed, go back into /data and find the "Exit Only Init.d" file if its there your init.d is working.....
If its as good as it sounds, this'll surely be one of my favorites. Trying this out.
Good to see you on here! I used your tweaks when I was on the E4GT. This is good stuff people!
Sent from my SPH-L710 using XDA
Soap said:
If its as good as it sounds, this'll surely be one of my favorites. Trying this out.
Click to expand...
Click to collapse
give it a try
s9amme said:
Good to see you on here! I used your tweaks when I was on the E4GT. This is good stuff people!
Sent from my SPH-L710 using XDA
Click to expand...
Click to collapse
this is the best working version yet enjoy
Nice. Giving this a try
Sent from my SPH-L710 using xda premium
Goddly said:
this is the best working version yet enjoy
Click to expand...
Click to collapse
Is it for stock kernel only, or will it play nice with KT as well?
:fingers-crossed:
orlzzt said:
Is it for stock kernel only, or will it play nice with KT as well?
:fingers-crossed:
Click to expand...
Click to collapse
Same question but with dkp?
Sent from my SPH-L710 using xda premium
_Epic said:
Same question but with dkp?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Its not kernel sensitive , nothing in this relates to kernel. should be 100% compatible, only thing you need to be rooted, (busybox etc) Crossbreeder is awesome. has add block etc. for those who want to shut off certain aspects of crossbreeder there are terminal commands you can find those in his thread...
Goddly said:
Its not kernel sensitive , nothing in this relates to kernel. should be 100% compatible, only thing you need to be rooted, (busybox etc) Crossbreeder is awesome. has add block etc. for those who want to shut off certain aspects of crossbreeder there are terminal commands you can find those in his thread...
Click to expand...
Click to collapse
Thank you! Will be flashing it in a few.
Sent from my SPH-L710 using xda premium
I'll give it a go!
Sent from my SPH-L710 using xda app-developers app
You will not be disappointed.
Sent from my SPH-D710 using Tapatalk 2
Goddly said:
You will not be disappointed.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
12 hours in, and I must say I am impressed! Definitely helps with reducing lag and with screen times. My battery is much better today, but being on my wi-fi instead of that nebulistic vortex that is Universal Studios Orlando will always improve battery. Will follow the OP instructions and do a full cycle, then report back.
Thanks to @Goddly for the lovely treat!
This is no joke guys... ive spent countless hours on this mod . I run this myself and know it's results. Just trying to share the wealth.
Sent from my SPH-D710 using Tapatalk 2
Will this work if I'm not on touchwiz? I'm currently running slimbean
Sent from my SPH-L710 using xda premium
shehroze3 said:
Will this work if I'm not on touchwiz? I'm currently running slimbean
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
it will, if you see the file in /data "Exit Only init.d" .. FILE not folder. then your init.d is working correctly..
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Seems to be doing well for me except for one problem, it seems to conflict with adaway? I restored a backup from right before I flashed this and adaway worked fine, but with the mod adaway says disabled every time and resets to that when I try to enable it, which requires a reboot.
Any ideas why? Potential fix?
Sent from my SPH-L710 using xda premium
therenegadenail said:
Seems to be doing well for me except for one problem, it seems to conflict with adaway? I restored a backup from right before I flashed this and adaway worked fine, but with the mod adaway says disabled every time and resets to that when I try to enable it, which requires a reboot.
Any ideas why? Potential fix?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Crossbreeder has its own ad block brother. try uninstalling adaway, if you find you want or need adaway as opposed to the ad block in CBreeder, there are terminal commands that can be used to disable ad blocking in Crossbreeder.. lemme know ill give you the disable terminal command.
looks good, will i need to uninstall crossbreeder before i flash this
edit: cant wait, i will uninstall and flash!