Develop Bugs

root

Ok, to save some people some time here for rooting and opening it up to non-market apps on your bravo, and probably any motorola AT&T device.
1. Z4Root is the easiest way to root since you just get it from the market. One buttons press then done.
2. to modify the settings.db in /data/data/com.android.providers.settings/databases/ use the SuperOneClick which you can get here
http://forum.xda-developers.com/showthread.php?t=803682
3. I used root explorer, which you can get from the market and just edited the /system/etc/motorola/com.android.providers.settings/secure.mkitso
and /system/etc/motorola/com.motorola.android.providers.settings/settings.mkitso files in place. Copying them, editing them, and chmodding them didn't seem to work for me for whatever reason. The way I did it, you don't have to do anything other than edit the file in text editor and factory reset your phone.

Rooted mine the other day using the Droid 2 root method at modmymobile.
I can't post links yet, so here's the instructions:
dragonius said:
Setup:
- Make sure you have ADB installed properly and the latest Motorola drivers.
- Download attached archive
- Extract to a directory, I used C:\Droid2Root
- Make sure you have USB degugging enabled
- Change connection to PC Mode
Process:
- Open Command Prompt (Start - Run - cmd - Enter)
- adb devices (to verify the connection)
- cd C:/Droid2Root
- adb push Superuser.apk /sdcard/Superuser.apk
- adb push su /sdcard/su
- adb push busybox /sdcard/busybox
- adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage-arm5.bin
- adb shell
- cd data/local/tmp
- chmod 0755 rageagainstthecage-arm5.bin
- ./rageagainstthecage-arm5.bin
- Let the process run until the prompt returns you to C:/Droid2Root (be patient, it takes a while, but does happen. If not, reboot phone and try again.)
- adb devices (to verify the connection)
- adb shell (you should now have a # prompt)
- mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system
- cp /sdcard/Superuser.apk /system/app/Superuser.apk
- cp /sdcard/su /system/bin/su
- cp /sdcard/busybox /system/bin/busybox
- chmod 4755 /system/bin/su
- chmod 4755 /system/bin/busybox
- mount -o ro,remount -t ext3 /dev/block/mmcblk1p21 /system
- exit
Once you have achieved root, to update the Superuser.apk to the latest version, run these commands:
- adb shell
- su
- mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system
- rm /system/app/Superuser.apk
- pm uninstall com.noshufou.android.su
Then search on the market for Superuser and download the one by ChainsDD. Confirmed working on latest Droid2 2.2 OTA & the new leaked 2.3.15 OTA.
Click to expand...
Click to collapse
On the Bravo its not "PC Mode", I think its "Portal and Tools" Other then that, everything worked flawlessly.

Thanks, a bunch. I actually used the Z4Root app from the market and it worked flawlessly. Now I'm just trying to figure out how to allow non market apps and maybe get an overclock going on this. any suggestions?

Grape Drank said:
Thanks, a bunch. I actually used the Z4Root app from the market and it worked flawlessly. Now I'm just trying to figure out how to allow non market apps and maybe get an overclock going on this. any suggestions?
Click to expand...
Click to collapse
I just bought this phone for my younger brother and I'm impressed. I have a Droid Incredible and its just as smooth. I also verified that the Z4root app from the marketplace roots the phone.

Did anyone get it unlocked yet

Yeah, it's a great phone. I'm trying to get the settings.db thing to work so we can install non-market apps, but it doesn't seem to be working. I got the db modded and put back in place, but I still don't see the option in the application manager screen.
IMO this is the #2 android phone on AT&T next to the captivate. that SAMOLED is great and the GPU on the captivate is top notch.
Anyway, if anyone can assist on the non-market app thing that would be great.
So far, I have rooted with Z4Root, removed the AT&T crapware, installed the MarketAccess to get around the stupid AT&T market filters. Last thing is to get the non-market apps going. After that it's a matter of waiting for this device to gain popularity and some custom ROMs.

I managed to get my Bravo to install non-market apps using:
1. SuperOneClickv1.5.5-ShortFuse
2. Click Here
I am not sure if just step 2 alone would be OK though.
Remember, you have to factory reset after you have finished with step 2.
Good Luck!

I edited my original post with the steps and tools I used to get the phone rooted and non-market unlocked.

Wait so can some explain how to unlock it?
Sent from my SGH-T959 using XDA App

cooldead said:
Wait so can some explain how to unlock it?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
If you mean "unlock" as in able to use the phone on a different carrier no one has posted how to do it yet. The OP meant allowing non-market apps.

Got cha, thanks.
Sent from my SGH-T959 using XDA App

cooldead said:
Got cha, thanks.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
No problem

I'm lost here,
Downloaded z4root onto my phone because it's not available on Market,
but it won't let me run the z4root.apk because it's not a market app.
total newb here, so any help would be appreciated.
thanks

Nevermind, got z4 to install using Android Central's Sideload Wonder Machine, then rooted my phone no problem, installed TiTanium backup, and rid of the bloatware.
Phone processes quicker, from settings, fetching list of running apps, data manager, manager etc, list loads much quicker now.

How did you go about getting rid of the garbage-ware? curious.

Hi I'm posting here in hopes to get a response because I cannot seem to get a response on the S1C forum. I rooted with z4root but cannot get non market apps enabled using S1C. I have .net framework 4.0 using vista and the motorola drivers from their site. I get as far as "getting mount path" and then it fails. Am I missing something or should this be working for me. And if so, what could be the problem? Many thanks.

SideloadWonderMachine worked for me, give it a shot. 2 clicks to add an app. Pretty foolproof (I am a fool).

Rooted my Bravo using adb install z4root (linux PC) then ran z4root from phone, worked great.

just rooted Bravo using Droid2Root files and manual ADB commands, from the thread that Gumpo10k shared in this thread, up above. Worked great, now I need a good 2.2 ROM to get tethering working.

[GUIDE] Permanent root on Desire Z 'the clean way', using rage

This thread is copied and modified from the G2 thread by trigeek for the Desire Z:
http://forum.xda-developers.com/showthread.php?t=834228
Apart from the changed hboot and wpthis-Z kernel module for the Desire Z instead of the G2, I have also updated the su-binary and SuperUser.apk to the latest version by ChainsDD
In no way I can be held responsible for any bricks to your phone. You are using this guide at your own risk!! I did test this guide on my own, and also on a friend's Desire Z.
As there was no manual rooting guide for the Desire Z, I posted it myself in order to help others that do not like visionary and like to do it 'the clean way'.
[GUIDE] Temp to permanent root on Desire Z, using rage instead of visionary
=================================================
There's already a guide here for obtaining permanent root using VISIONary, but some folks in #G2ROOT are having issues with the way that VISIONary modifies parititons. Using rage directly is a bit cleaner, since you know exactly what it's going to touch at each step of the way. I did NOT come up with any of this on my own, I'm building completely off of work that others have done. Speaking of which-
None of this would be possible without the tireless work that scotty2 put in. He stayed with the project for well over a month, through lots of smashed hopes and dead ends, until the solution was finally found. Were it not for his work, as well as the help of a few other key folks- we wouldn't be here. He deserves our thanks and some donations! We're talking hundreds of hours of work here, a couple bucks is not too much for that. His paypal is:
[email protected]
Send him some love! I'm not asking for anything myself, because I spent a half hour putting this together, and that doesn't deserve any donations!
DESIRE Z ROOT INSTRUCTIONS
=================================================
These are modified instructions based on the ones posted at http://bit.ly/g2root that use Visionary. A number of people have run into issues with the way that Visionary juggles around temporary partitions, and using the original root exploit is a much easier, and cleaner method for achieving permanent root. This tutorial will walk you through the rooting process by first achieving temporary root, and moving on to permanent root.
REQUIREMENTS
=================================================
•Visionary disabled at boot or uninstalled completely
•Android Terminal Emulator app
•ADB
•desirez-combined-root.zip (Attached to this post)
In the commands to run below, $ or # represent the prompt and should NOT be entered as part of the commands.
VERY IMPORTANT!
Visionary has caused filesystem corruption for some users during the rooting process. Before attempting the instructions below, make sure that you have "auto run on boot" turned OFF, and reboot your system. Since you will not need visionary anyway after this, you might as well just uninstall visionary and reboot NOW before doing anything.
TEMP ROOT
=================================================
ON YOUR PC:
Unzip the z-temp-root files to a folder. From a cmd window or terminal, navigate to that folder and execute these commands:
Code:
$ adb push su /sdcard/su
$ adb push Superuser.apk /sdcard/Superuser.apk
$ adb push rage /data/local/tmp/rage
$ adb push busybox /data/local/tmp/busybox
$ adb push root /data/local/tmp/root
$ adb shell chmod 0755 /data/local/tmp/*
ON YOUR PHONE:
1.Launch Terminal Emulator
2.
Code:
/data/local/tmp/rage
3.Wait for the message: "Forked #### childs."
4.Menu > Reset Term - Terminal Emulator will exit.
5.Launch Terminal Emulator, it Force Closes. Launch a second time, and you'll have a root shell
6.**NOTE**: in the original directions from the XDA thread, you are instructed to run the /data/local/tmp/root script here. DON'T do this just yet. Leave the terminal window open.
PERM ROOT
=================================================
ON YOUR PC:
unzip z-perm-root and navigate to that folder. There will be four files. You will need to push two of these to your phone: hboot_7230_0.84.2000_100908.nb0 and wpthis-Z.ko. The other two files are optional for checksum verification.
Code:
$ adb push hboot_7230_0.84.2000_100908.nb0 /data/local
$ adb push wpthis-Z.ko /data/local
Optional but might came in handy:
Code:
$ adb push md5checksum /sdcard/md5checksum
ON YOUR PHONE:
You should still have terminal emulator up, at a root prompt. Now run:
Optional but recommended:
Code:
# /data/local/tmp/busybox md5sum /data/local/*
You should see:
hboot_7230_0.84.2000_100908.nb0 2ce1bdd5e4c1119ccfcecb938710d742
wpthis-Z.ko c73c5e77c91d306c418983c002b60b93
In case your hboot or wpthis-Z.ko file do not have the same md5hash as shown above, DO NOT CONTINUE. This means your file is corrupt or you are using a different file, for example the one for the G2 instead of Desire Z.
Now, let's turn off security for permanent flashing:
Code:
# insmod /data/local/wpthis-Z.ko
init_module 'wpthis-Z.ko' failed (Function not implemented)
That means it worked. This next step is CRUCIAL. You must make sure that you are writing to the proper partition here or you could brick your phone. To be absolutely clear- the partition is mmcblk(zero)p(one)(eight)
# dd if=/data/local/hboot_7230_0.84.2000_100908.nb0 of=/dev/block/mmcblk0p18
Click to expand...
Click to collapse
You should see some messages indicating that it was written.
Code:
# /data/local/tmp/root
This will lock in root, and give you 'su' access in the future. Next, run:
Code:
# sync
Now wait at least a minute, just to be safe. After waiting, reboot your phone using the power button. After it finishes starting up, launch the terminal emulator, and type 'su'. You should get the prompt asking you to grant permissions. If you got the prompt, congratulations! You have permanent root!

Nice guide, thanks

Thank you Mr Q. works like a charm!

first of all.. thanks for this great guide. Everything went perfect until I came to the step to lock in root. After the command "/data/local/tmp/root" I get this error:
mkdir failed for /system/xbin, File exists
when I just ignore it and type sync after that I have no root acces after a reboot.
Does anybody have a solution for it? I have already done a hardreset with the same results.
thanks in advance...

So this only roots your phone? Or does it s-off as well? From what I understand this s-offs as well because you're pushing the hboot as well.
EDIT: Nevermind. I read the thread again and it does indeed s-off as well.

MarDor said:
first of all.. thanks for this great guide. Everything went perfect until I came to the step to lock in root. After the command "/data/local/tmp/root" I get this error:
mkdir failed for /system/xbin, File exists
when I just ignore it and type sync after that I have no root acces after a reboot.
Does anybody have a solution for it? I have already done a hardreset with the same results.
thanks in advance...
Click to expand...
Click to collapse
Everything was fine up until this point. So i restarted the phone and phone is stuck on the "quietly brilliant" screen

ssyed said:
Everything was fine up until this point. So i restarted the phone and phone is stuck on the "quietly brilliant" screen
Click to expand...
Click to collapse
having the same issue here

So I'm looking into these S-OFF and rooting threads and here is two bricks too. Does anyone have an answer for these two or should I skip this? Did the hboot do this or was it due to some problem in inserted kernel module? (I.E. the reboot of the emmc controller resulted in a ****ed up file system?)

yelti said:
having the same issue here
Click to expand...
Click to collapse
AnyDone said:
So I'm looking into these S-OFF and rooting threads and here is two bricks too. Does anyone have an answer for these two or should I skip this? Did the hboot do this or was it due to some problem in inserted kernel module? (I.E. the reboot of the emmc controller resulted in a ****ed up file system?)
Click to expand...
Click to collapse
Ok, so I have figured out how to get out of this "quietly brilliant" loop.
First of all, this isn't a brick and all that is needed to fix this is a quick factory reset from the bootloader.

ssyed said:
First of all, this isn't a brick and all that is needed to fix this is a quick factory reset from the bootloader.
Click to expand...
Click to collapse
Ok, so does any one have an explanation why this happened?
1. It wasn't wrong or screwed hboot, otherwise we would be facing a real brick?
Was it the root method? Was it the wpthis-Z.ko?
It might have been the kernel module, but I can't be sure about that with so little knowledge I have. (sure not the module itself but the kick to the emmc?) Just that it seems to be more likely option than a rooting attempt on a cached r-o file system?
I'm not complaining about the guide, it is specific and easy to follow but I would really love to have these semi bricks etc inspected more closely. It is not really helping to encourage ppl to root and try safe-off when we have unexplained bricks and semi-bricks around

MarDor said:
first of all.. thanks for this great guide. Everything went perfect until I came to the step to lock in root. After the command "/data/local/tmp/root" I get this error:
mkdir failed for /system/xbin, File exists
Click to expand...
Click to collapse
ssyed said:
Everything was fine up until this point. So i restarted the phone and phone is stuck on the "quietly brilliant" screen
Click to expand...
Click to collapse
yelti said:
having the same issue here
Click to expand...
Click to collapse
Did you guys run Visionary before trying this "rage" method of rooting ?

steviewevie said:
Did you guys run Visionary before trying this "rage" method of rooting ?
Click to expand...
Click to collapse
I don't know about others, but I didn't on mine. I was rooting it for the first time. Also, I don't know if this has anything to do with it, but I have the Bell version from Canada.

The root script threw an error for me too, so just to be safe I opened the script and typed in the commands manually. If you have problems with the script, just run these commands from the root terminal on your phone:
Code:
/data/local/tmp/busybox killall rage
mount -o rw,remount -t ext3 /dev/block/mmcblk0p25 /system
mkdir /system/xbin
/data/local/tmp/busybox cp /data/local/tmp/busybox /system/xbin/busybox
chmod 4755 /system/xbin/busybox
/system/xbin/busybox --install -s /system/bin
cp /sdcard/Superuser.apk /system/app/Superuser.apk
cp /sdcard/su /system/bin/su
chmod 4755 /system/bin/su
mount -o ro,remount -t ext3 /dev/block/mmcblk0p25 /system
sync
"mkdir /system/xbin" just creates a directory, if it already exists you can ignore this command and proceed.
Hope this helps someone.. Thanks to the OP for the scripts.

Have a quick look, /system/xbin already seems to exist on my phone too.
So is there an error in the script ? e.g. needs to ignore if the directory already exists ? Or am I (we ?) missing something ?

goldenarmZ said:
"mkdir /system/xbin" just creates a directory, if it already exists you can ignore this command and proceed.
Click to expand...
Click to collapse
Good info, thanks. Perhaps just comment out that line of the script, to save running it all by hand (and therefore be prone to more error ?) ?

steviewevie said:
Good info, thanks. Perhaps just comment out that line of the script, to save running it all by hand (and therefore be prone to more error ?) ?
Click to expand...
Click to collapse
I did that first.. it threw more errors with the mount commands because I'd already run the script once, so some of the commands were repated. If it's your first run through, commenting it out would be fine.
I only did it line by line so I could see any more errors for myself and decide if they were important. As it turns out the script is very simple and only involves moving files around and changing their permissions.. anything that goes wrong should be immediately apparent even if you have no experience with shell commands.

goldenarmZ said:
I only did it line by line so I could see any more errors for myself and decide if they were important. As it turns out the script is very simple and only involves moving files around and changing their permissions.. anything that goes wrong should be immediately apparent even if you have no experience with shell commands.
Click to expand...
Click to collapse
Thanks, I was starting to worry about the bad experiences outlined above, given that this method appeared to be a more reliable one than VISIONary, and a route I was going to go down. But I'm pretty comfortable with shell scripts, so your input makes me feel a whole lot better !

goldenarmZ said:
The root script threw an error for me too, so just to be safe I opened the script and typed in the commands manually. If you have problems with the script, just run these commands from the root terminal on your phone:
-code-
"mkdir /system/xbin" just creates a directory, if it already exists you can ignore this command and proceed.
Hope this helps someone.. Thanks to the OP for the scripts.
Click to expand...
Click to collapse
thanks for this... I will give it a try

Yay, I just perma-rooted my phone using this method, many thanks to those who came up with the method in the first place, plus this handy guide too.
I got the message about /system/xbin already existing, but you can just ignore that message, it runs the rest of the script anyway.

ssyed said:
Ok, so I have figured out how to get out of this "quietly brilliant" loop.
First of all, this isn't a brick and all that is needed to fix this is a quick factory reset from the bootloader.
Click to expand...
Click to collapse
So after doing the guide you simply reeboot your phone into bootloader and select factory reset?
And then will the device be perm root and s-off???

[Q] Gfree Rooting!

Hey guys,
I took the advice of tons of people here to try the gfree method instead of the hboot or something, or the visionary permaroot.
the thing is, i did it my way and was too lazy to install ADB cuz it always failed and I don;t know how to use it.
I got a desire z- asian version
with a 1.2 version (NOT 1.7 that can't use gfree)
anyway
here's what i did
1) Installed Visionary to Temproot
2) got superuser for terminal emulator (ON PHONE)
3) chmod 777 the GFREE File on SDCARD
4) Tried to run it with the ./gfree -f command
5) IT SHOWS PERMISSION DENIED....WHYYY!???
WTF?
Anyway, if theres no o
ther way than ADBing this, I'll just go ahead and use the .ko file from the other rooting method..
THANKS GUYS

kwhkkwhk said:
Hey guys,
I took the advice of tons of people here to try the gfree method instead of the hboot or something, or the visionary permaroot.
the thing is, i did it my way and was too lazy to install ADB cuz it always failed and I don;t know how to use it.
I got a desire z- asian version
with a 1.2 version (NOT 1.7 that can't use gfree)
anyway
here's what i did
1) Installed Visionary to Temproot
2) got superuser for terminal emulator (ON PHONE)
3) chmod 777 the GFREE File on SDCARD
4) Tried to run it with the ./gfree -f command
5) IT SHOWS PERMISSION DENIED....WHYYY!???
WTF?
Anyway, if theres no o
ther way than ADBing this, I'll just go ahead and use the .ko file from the other rooting method..
THANKS GUYS
Click to expand...
Click to collapse
Ive seen this before, which files did you put on the sdcard, If you put the entire gfree02.zip file on your sdcard this is worng. You need to unzip the gfree02.zip file and place only the gfree file from the unzipped gfree02.zip file on the root of your sd card.
then re-run using this Code:
Code:
$ su
# cd /sdcard
# chmod 777 gfree
# ./gfree
# sync

i did everything as said, moved only the gfree file onto the sdcard.
everything works until ./gfree
it says: "./gfree: permission denid"
i don't really know whats wrong. the kernels right - its a stock 2.2 asian desire z on 1.2 version or something.
thanks SO MUCH For the reply though. I REALLY APPRECIATE IT

The guide says not to use Visionary for temp root before using gfree, in fact it says to either turn it off (if set to auto-soft-root on boot) or uninstall it altogether.
the gfree method has you use the rage method to obtain temp root.

raitchison said:
The guide says not to use Visionary for temp root before using gfree, in fact it says to either turn it off (if set to auto-soft-root on boot) or uninstall it altogether.
the gfree method has you use the rage method to obtain temp root.
Click to expand...
Click to collapse
Thats if your gonna temp root with Rage, requires ADB to push the files, which he is trying to avoid using ADB, gfree has been done the way he is trying before.

I don't believe you can run the gfree program from the sdcard mount point. You should try moving it to the phone itself (try putting it in /data/local directory as instructed in the wiki). That should take care of your permission denied issue.
Also, you may want to copy over all of the other files as listed in the wiki (except for rage since that's not needed for you). The wiki says you need to run the root command after running gfree (it'll set up things like busybox and su for you). You could also do all it manually yourself if you really wanted to...

But how do I move it off the sdcard? I tried using es file explorer but it says gfree can't be moved. And I cant mount the internal memory. Thanks for the advice though

If you are temp rooted you should be able to remount your file system as read/write, you will need to do this to copy files to the /system path and set permissions.

raitchison said:
If you are temp rooted you should be able to remount your file system as read/write, you will need to do this to copy files to the /system path and set permissions.
Click to expand...
Click to collapse
How would I do that?
remounting the file system? i can't find that option in settings...
and by copying the files, is that done through a file manager on the phone?
or on a computer?
thanks so much guys for the help

It shouldn't make a difference if gfree is on /sdcard or not.
To the OP - do you have a # (root) prompt when you are trying to run gfree ? You need that or it won't work. Have you followed exactly the commands that joemm posted, and you didn't get error messages from any of them ?

Yes I do have that sign. Everythin works (chmod, su) until the last code which is to run it.

kwhkkwhk said:
Yes I do have that sign. Everythin works (chmod, su) until the last code which is to run it.
Click to expand...
Click to collapse
Do "ls -l gfree" and copy and paste up here the output please. Something is still wrong.

It shows
Rwxr-x system sdcard_rw 134401 2010-12-11 08:57 gfree

steviewevie said:
It shouldn't make a difference if gfree is on /sdcard or not.
Click to expand...
Click to collapse
By default on my phone (running CM6), the sdcard mount point is mounted with the noexec option (so no direct execution of any binaries). I assumed it was this way on all roms for security reasons, but I'm not familiar with Visionary. Are you saying that Visionary remounts the sdcard as exec for you? Or that it's already that way by default for the stock rom? If so, then yes, you can leave gfree on your sdcard. You can check by running mount in the terminal. You should see an entry for /sdcard with all of its options after it. If you see noexec in there, you will either need to move the files to the phone or remount your sdcard with the exec option instead.
If you want to copy files over to your phone while rooted, you could use Root Explorer (probably easiest way). I believe there are other free programs that allow r/w access, but I haven't tried anyway. Otherwise, you should be able to copy over the files in Terminal. I think the data partition is mounted as r/w but you can verify with the mount command mentioned above (on the line containing /data, look for either rw or ro). If there is a rw, then just use the copy command to copy the files where you need to:
Code:
su
cp /sdcard/gfree /data/local
If the data partition is mounted as ro, you'll need to remount as rw first:
Code:
su
mount -o remount,rw -t ext3 /dev/block/mmcblk0p26 /data
Pretty sure that won't be needed though.

ianmcquinn said:
By default on my phone (running CM6), the sdcard mount point is mounted with the noexec option (so no direct execution of any binaries).
Click to expand...
Click to collapse
ooh, ok, thanks, I never knew that. My apologies, that looks like why it's not running then.
If you want to copy files over to your phone while rooted, you could use Root Explorer (probably easiest way). I believe there are other free programs that allow r/w access, but I haven't tried anyway. Otherwise, you should be able to copy over the files in Terminal. I think the data partition is mounted as r/w but you can verify with the mount command mentioned above
Click to expand...
Click to collapse
Yeah, /data is mounted as rw by default, so should be fine to copy as you said.

Alright. This WORKS for running gfree
but for the step that makes the root "stick" according to the guide here...
http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_G2
where i says :
"You now have read-write access to your /system, hboot, and recovery partitions. But you still need to "lock in" root, and give you 'su' access in the future. So just do:
# /data/local/tmp/root
# sync
"
I can't find /data/local/tmp/root
so it fails to run..
any suggestions on this?
gfree runs fine. it says done when I did ./gfree -f
thanks guys for all the help!

kwhkkwhk said:
# /data/local/tmp/root
# sync
"
I can't find /data/local/tmp/root
so it fails to run..
any suggestions on this?
Click to expand...
Click to collapse
root is the binary that actually does the rooting, it's included in the gfree_temp-root zip. Did you copy that to /data/local/tmp or did you copy it somewhere else?

the only thing i did, if you were able to see my previous problem,
was just copying the gfree file over to the /data/local and running it
by ./gfree -f
other than that, i copied nothing else, since the guide using adb and the commands used moved nothing other than the gfree file i moved to /data/local
I didn't use the gfree_temp-root.zip folder, i used the gfree_02.zip (permaroot) folder.
and i temp rooted using visionary to get the needed gfree file onboard.
then do i need other filed then?
thank you so much for the quick reply.

kwhkkwhk said:
then do i need other filed then?
Click to expand...
Click to collapse
Yeah, root is actually just a script that installs things like busybox and su for you (see my earlier post).
You should copy those files to the proper locations listed in the wiki (pretty much every file but rage). It'll make life easier (otherwise, you'll have to do all of that stuff manually).
Congrats, you almost have a fully rooted phone.

THank you so much!
and thank you to all of you guys who helped me!
I managed to root my phone finally! Without adb!
YAY

[Q] Metamorph

I'm on a HTC Desire, rooted with unrevoked and I have flashed the Oxygen ROM. I want to install custom framework, but every time I try to open Metamorph, I get the ''some files could not be extracted and set up. please make sure you have enough space in /system''. I have tried
''adb remount
adb shell
ln -s /system/xbin/busybox /system/xbin/cp'', but still without luck. Could someone please tell me what to do? I'm not very skilled at this, so please explain carefully. Thanks!

Isnt it because of the fact you need BusyBox from the market in order to get Metamorph to work, but BusyBox is not working for Desire yet.
it says so in the description of BusyBox in the market.

If you want busybox download titanium backup and open it, you will see how obtain busybox working on desire It worked for me

qweasdfzxc said:
If you want busybox download titanium backup and open it, you will see how obtain busybox working on desire It worked for me
Click to expand...
Click to collapse
Thanks, but am I supposed to do something after I've installed busybox with titanium? Or just open MM? cus that didn't work. And also, why can't I delete the 'busybox' file from /xbin? Sorry for being such a noob, but you're my hero if you can help me with this!

I have no idea how metamorp works or what you are trying to do, but if you want to write to the system partition while booted you need to be S-off.
If you want to delete busybox and you're not S-off, you need to do it with adb while in recovery.

TheGhost1233 said:
I have no idea how metamorp works or what you are trying to do, but if you want to write to the system partition while booted you need to be S-off.
If you want to delete busybox and you're not S-off, you need to do it with adb while in recovery.
Click to expand...
Click to collapse
alright, thanks. which adb command? tried adb uninstall, but that didn't work, unless i did something wrong

adb shell
rm /system/xbin/"whatever you are trying to remove from there"
To see what is in there:
ls /system/xbin
But i don't think uninstalling busybox will fix your problem since you got a error regarding /system and you won't be able to write to there unless you're S-off.

TheGhost1233 said:
adb shell
rm /system/xbin/"whatever you are trying to remove from there"
To see what is in there:
ls /system/xbin
But i don't think uninstalling busybox will fix your problem since you got a error regarding /system and you won't be able to write to there unless you're S-off.
Click to expand...
Click to collapse
Ok, thanks a lot anyway!

[GUIDE][ROOT] Blu Dash 3.5 d170 - Help with recovery and root

Update: New guide is in post # 122
http://forum.xda-developers.com/showthread.php?p=40433602#post40433602
The guide is in post # 98
http://forum.xda-developers.com/showthread.php?p=39362805#post39362805
Hello,
I have a Blu Dash 3.5 and would like to install clockworkmod recovery and enable root access, but so far have not found anything. Could you help me?
thank you

I tried using SuperOneClick, Gingerbreak, zroot but all without success.
Anyone have any other option?

_ _

I managed to set up the android SDK on ubuntu but I get permission denied message when trying to copy the files to the /system
I suppose I have to remount the partition in RW to be able to put the files but no idea how to do this.

_ _

fenrixarena said:
Well you can't without it being rooted, right now I just don't care about it anymore it's just a phone, & $30 isn't worth just freeing up some space. No guarantee that will make it run smoother without crashes either, that could just be a result of interface, so a bit of speed don't seem worth it to me, I have my own ringtones with ringdroid so I'm happy.
Everything having to do with extracting the boot.img requires it to be rooted otherwise I know enough about enough crapola already I could make that all spiffy and zabam if I wanted. I would just literally edit all the img files and provide a simple update.zip given I could get signing to work!
unfortunately I get nothing from fastboot at all, not sure it would help though. oem unlock stuff is all I recall about that besides it being a great wau to flash images to the phone
let me know if you make any progress, I'll put in my effort if you do anything at all that intices me to find a path to progress
Click to expand...
Click to collapse
fenrixarena, hope you get to find any progress on rooting this phone. I also agree with you that it is no worth the time or effort with this kind of phone but I think that the challenge is interesting . In my case I have no idea on how you may root it but I am sure it is possible i guess it all in find another compatible boot.img that can be rooted, right?
Regards,

- -

_ _

What is the address of the site that charges $ 30? We can verify that other users would like to do and split the cost ...

I managed to make root ...
I found the CWM recovery and stock recovery for Qsmart.
I was very curious if it would work in BLU and ended up installing the CWM with fastboot. It did not work, the screen just stays with the BLU and not access the recovery.
Then I installed stock recovery and did not work ...
But I realized that Windows recognized the device connected and I recognized two units with unsupported format.
then returned to the prompt and saw that the ADB was working. I used the command 'adb shell' and to my surprise was how the cursor #
So without wasting time already put su and busybox in /system/ bin and superuser.apk in /system/app, I changed the permissions and restarted the phone. And the root was working perfectly. :victory:
Only one problem, I do not have the recovery installed.
I wonder how I can help you to make root without losing recovery

>>

I use Windowns 7 Pro x64 bits.
I installed the drivers in the SuperOneClick version 2.3.3.
With the drivers installed could use fastboot and adb command.
Turning on the phone + vol - access mode fastboot / bootloader
It would be good to get root without losing the recovery. Because we need him to compile a clockworkmod recovery.
I used the romdump and got the following files:
https://docs.google.com/file/d/0B5rQL4bfhfPRZXhhZkg1Mkx5SHc/edit?usp=sharing
I used the mkfs.yaffs2 to convert the file system.tar for system.img
https://docs.google.com/file/d/0B5rQL4bfhfPRMGdaNnQ4b1RwclU/edit?usp=sharing
This system.img would function on another device?

okay, I am having one problem, what did you type for the permissions?
I've got superuser.apk pushed and the su in the /system/bin but when i try to chmod 777 it returns to -r- after I reboot!
Here's howto manually back up now that I have recovery adb root:
cat /proc/mtd
Then just cat (mtd#) > /sdcard/(image.img)
You can restore via fastboot flash

fenrixarena said:
okay, I am having one problem, what did you type for the permissions?
I've got superuser.apk pushed and the su in the /system/bin but when i try to chmod 777 it returns to -r- after I reboot!
Here's howto manually back up now that I have recovery adb root:
cat /proc/mtd
Then just cat (mtd#) > /sdcard/(image.img)
You can restore via fastboot flash
Click to expand...
Click to collapse
you get root access in adb shell?
send su to /system/bin with permission 6755.
busybox to /system/bin with permission 755.
and superuser.apk to /system/app with 644.
reboot your phone
then download terminal emulator on your phone and enter the command su
if the cursor change to # worked

erickreisbr said:
you get root access in adb shell?
send su to /system/bin with permission 6755.
busybox to /system/bin with permission 755.
and superuser.apk to /system/app with 644.
reboot your phone
then download terminal emulator on your phone and enter the command su
if the cursor change to # worked
Click to expand...
Click to collapse
These are actually good news... Right on!!! Cheers if you manage to root Blu Dash 3.5 :victory:
Can someone guide me on how I can Root my phone? What adb tools do i need?
Regards

az0ik said:
These are actually good news... Right on!!! Cheers if you manage to root Blu Dash 3.5 :victory:
Can someone guide me on how I can Root my phone? What adb tools do i need?
Regards
Click to expand...
Click to collapse
I can upload the cwm.img & adb I used + fastboot. Not all adb.exe will recognize the phone. Also drivers from qsmart for adb bridge.
1 boot holding vol down + power (about 15 sec.)
Fastboot flash recovery cwm.img
Then turn phone off.
Boot holding vol UP + Power (about 15 sec)
Adb push su /system/bin
Adb push busybox /system/bin
Adb push superuser.apk /system/app
adb shell
~# chmod 6755 /system/bin/su
~# chmod 755 /system/bin/busybox
~# chmod 644 /system/app/superuser.apk
reboot your phone
terminal emulator - su
permission granted
IT WORKED!
---------- Post added at 02:21 AM ---------- Previous post was at 02:00 AM ----------
sorry, tomorrow I will upload a zip with the img i used and so forth all in one zip so you can root with that, unless it's here by someone else by then I gotta work!

fenrixarena said:
I can upload the cwm.img & adb I used + fastboot. Not all adb.exe will recognize the phone. Also drivers from qsmart for adb bridge.
1 boot holding vol down + power (about 15 sec.)
Fastboot flash recovery cwm.img
Then turn phone off.
Boot holding vol UP + Power (about 15 sec)
Adb push su /system/bin
Adb push busybox /system/bin
Adb push superuser.apk /system/app
adb shell
~# chmod 6755 /system/bin/su
~# chmod 755 /system/bin/busybox
~# chmod 644 /system/app/superuser.apk
reboot your phone
terminal emulator - su
permission granted
IT WORKED!
---------- Post added at 02:21 AM ---------- Previous post was at 02:00 AM ----------
sorry, tomorrow I will upload a zip with the img i used and so forth all in one zip so you can root with that, unless it's here by someone else by then I gotta work!
Click to expand...
Click to collapse
Thank you so much Fenrixarena!! You are awesome :good::good::good:. I still can believe it, i thought it was a lost hope... I really appreciate for uploading the files I am patient enough to wait another day

Follow the ADB and the recovery I've used.
The drivers installed by SuperOneClick, but have these here:
32 bits - http://www.mediafire.com/?21na032gnzbfza2
64 bits - http://www.mediafire.com/?1hrwo325cb1ej2w

Fx

fenrixarena said:
interesting, I got a cwm4s12.img that's larger(4.51) and because of having a 64bit laptop without 32bit support I had to use a smaller ADB (158kb) to be able to recognize the phone and only on regular usb debugging does superoneclick install drivers which was useless since I needed the drivers to work in recovery.
If those files don't work for you I will upload mine
I got my files from foreign thread, and since I download so many versions and custom versions of programs like adb I'm not sure where it came from !!
oh, and he rooted the phone first, I only did it on a more bothersome platform.
Click to expand...
Click to collapse
the root worked on your phone?
Now we need a recovery. I'm trying to learn how to compile cwm, but it is very complicated.