5.0.2.0 - Wildfire Q&A, Help & Troubleshooting

Hello. I've had CWM 3.0.0.6 installed on my Wildfire ever since I rooted it and it has been working fine (I had to use 2.5.0.7 for amend scripts), and now ROM Manager (just upgraded to CM 7.1) offered me to install 5.0.2.0 recovery. Should I install the newer one or should I keep this one?

In my opinion its totally down to personal preference mate,if your happy don't change. Regards Slymobi.
sent from my wilderbeast:buzz

El Mariach1 said:
Hello. I've had CWM 3.0.0.6 installed on my Wildfire ever since I rooted it and it has been working fine (I had to use 2.5.0.7 for amend scripts), and now ROM Manager (just upgraded to CM 7.1) offered me to install 5.0.2.0 recovery. Should I install the newer one or should I keep this one?
Click to expand...
Click to collapse
Rom manager doesn't flash the recovery permanently on the phone, but only in a virtual sd partition...

if its working perfectly then don't do anything....

How can i update the cwm in the cwm, when i have one the img file like this http://www.multiupload.com/M7HOETAK33
I have cwm 2.5.0.7

U have to flash it by using fastboot.it can be found in android-sdk installation pack.
Sent from my HTC Wildfire using XDA App

uurm also i have permanently cwm version 4. xxx and as flashable zip version 5.0.2.0 and 2.5.0.7 as update.zip so if you want to use any version first flash in the option "choose zip from sd card" and flash the cwm version than u have temporary the version of cwm as you need or if you have rom manager than u can u can load older version as virtual sd partition

Related

[Q] i'm using two recoveries at once...

I dont think i need them both,
I originially had clockworkmod after rooting with unrevoked,
then i installed amonra to split the sdcard,
now i want clockworkmod so i can flash unsigned roms.... so i used rom manager to flash it, done so about 10 times now, it says that i have it installed, and i can get to it only if i boot into recovery from rom manager, if i boot into recovery any other way i get amonra..
its not a huge problem since both recoveries are working properly, but id rather just have clockworkmod because im never going to split my card again..
anyone know how i can remove amonra and install cwm?
thanks.
If you are S-On you will have to use unrevoked to get back to ClockworkMod.
If you are S-Off, you can use fastboot flash recovery recovery.img.
By using ROM Manager you have installed ClockworkMod using the "fake-flash" method. It was how recoveries could be launched easily on desire before unrevoked cracked it!
Thats because ROM Manager uses a fake-flash so it will load CWM but when you boot from HBOOT it will use AmonRA as it's the permanent recovery
AmonRA is a better recovery and does the same job as CWM so just use that
Ooooohhhh I see, are there any negatives to using fake flashed clockworkmod?
Sent from my HTC Desire using XDA App
No, it's just ROM Manager is a fail like that
(I don't like it in case you haven't guessed)
It just means that clockwork mod is not actually installed but just a update.Zip on the SD card which launches clockwork mod wheh flashed.
What version of amonra recovery do you have? It should be able to run unsigned zips.
1.7.0.5 r5 or something like that, it doesn't like unsigned.
Sent from my HTC Desire using XDA App

[Q] Different Clockwork Recovery Versions

I have a rootet Desire (via unrevoked) with s-off and Oxygen 2.1.3 ROM. I flashed a new clockwork version (3.0.0.5) .img file via ADB. If I boot my phone and enter the clockwork recovery the new version is used. If I reboot the phone using ROM manager it enters the old version of clockwork recovery.
So I think, I have 2 recovery versions on my phone. How can this be avoided? I just want to have the new one.
Found this in Cyanogenmod forum.
CWM 3.0.0.5 is permanently flashed so it's always there. 2.5.0.7 is a temporary recovery as when you reboot with rom manager, it uses the zip file that comes with it
Click to expand...
Click to collapse

[Q] no im in big problem with wildpuzzle room

when i try to use the zip room he tell me
amend scripting(update scripte)is no longer supported
amend scripting was deprecated by google in android 1.5
it was necessary ro remove it when upgrading to clockworldmod 3.0 gingerbread based recovery
please switch to edify scripting(updater-scrupt and update binary)
to creat working update zip packages
installation aborted
what shoult i do to install the room
- Download ROM Manager App from the Market, Open it
- Then Select Install Clockworkmod Recovery. This will install v2.5 on the SDCard
- Select Reboot into Recovery from ROM Manager
- This will take you to Clockworkmod 2.5, then you can install this ROM as usual.
Remember to perform a wipe before installing a new ROM.
Boot your current rom. Root it if not yet. Install rom manager.
Then flash 2.x recovery from ron manager. Then reboot to recovery from rom manager itself. Now install your rom.
For next time to use 2.x recovery, just open the recovery and apply sdcard update (works only if u have flashed 2.x recovery from rom manager for the last time) .
Sent from my HTC Wildfire using XDA App
3xeno said:
- Download ROM Manager App from the Market, Open it
- Then Select Install Clockworkmod Recovery. This will install v2.5 on the SDCard
- Select Reboot into Recovery from ROM Manager
- This will take you to Clockworkmod 2.5, then you can install this ROM as usual.
Remember to perform a wipe before installing a new ROM.
Click to expand...
Click to collapse
thank's so much for help
bharatgaddameedi said:
Boot your current rom. Root it if not yet. Install rom manager.
Then flash 2.x recovery from ron manager. Then reboot to recovery from rom manager itself. Now install your rom.
For next time to use 2.x recovery, just open the recovery and apply sdcard update (works only if u have flashed 2.x recovery from rom manager for the last time) .
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
thank's for help
it work he start install the room now
I have the same problem but the catch is: I installed HCDR.Jacobs kernel(http://forum.xda-developers.com/showthread.php?t=798471) while running CyanogenMod 7.1. and of course couldn't boot afterwards . Now i can't Install a ROM that will support the new kernel and i can't install the stock kernel . I am running Clockworkmod 3.0.0.6. Can someone help??? I've got to have the phone running before Saturday
P.S. Don't tell me that I'm stupid for installing the kernel, I already know that -_-

[q] flashing roms!

when im flashing my roms on my htc Wildfire i can only flash Cyanogen mod, does this have anything to do with having HBOOT 1.001.001?
I presume it gives you the Amend scripting error.
Download ROM manager
Click Flash recovery inside it
Wait
Click reboot into recovery
Flash from there.
but i already have clock mod inside it, is the version of clock mod too new? i think i have 3.2 or somthing
You need 2.5 for pre-gingerbread roms, kernels and radios.
And if you flash it from ROM manager, you can still get to 3.2 from the HBOOT and the 2,5 from rom manager.
so your saying to downgrade to the 2.5 clockmod firmware? because curently im useing 3.0 somthing
Clockworkmod recovery 3.x will install only gingerbread roms.
To install other things either directly flash 2.x recovery or flash 2.x recovery from Rom manager.
From Rom manager select flash recovery which flashes 2.x recovery on memory card relating to a file named update.zip. Then reboot to recovery from the option in Rom manager itself and you will have 2.x recovery. And if you wiped everything and in 3.x recovery, just flash that update.zip first which gives you 2.x recovery instantly for installing other roms.
Sent from my HTC Wildfire using XDA App
thanks man! got it all worked out thanks for all the help people!

[Q] ClockworkMod update issue

Hello.
I have HTC Desire rooted with Unrevoked and installed CyanogenMod 7.1 RC1 some time ago. My problem is that ClockworkMod version was 2.5.0.7. When I enter into Rom Manager I can see that mu current version of ClockworkMod is 5.0.2.0. But when I click on "enter into recovery" my phone restars and enters into recovery but then I see on top of my screen that it's still 2.5.0.7 version. So my question is, how can I update ClockworkMod with Rom manager?
a recovery need to be stable and need to be working..cwm 2.5.0.7 is still the best
stay away from rom manager and do things manually
anyway if u want update the new recovery (some users reported problems) from rom manager u need s-off
andQlimax said:
a recovery need to be stable and need to be working..cwm 2.5.0.7 is still the best
stay away from rom manager and do things manually
anyway if u want update the new recovery (some users reported problems) from rom manager u need s-off
Click to expand...
Click to collapse
Thank you very much for your help. Problem is solved. I simply didn't know that I have to s-off. And I want to have newer ver. of CWM to partition my SD card from ROM Manager. But since you wrote it's better to do it manually then I'll try I think

Categories

Resources