Related
Okay, so earlier today I rooted my evo and flashed the CM6 ROM. A little later I tried to install Google apps.
I followed a tutorial on youtube on how to install gapps using rom manager.
Now my Evo is stuck in the Clockworkmod recovery screen and when I click reboot system now it reboots and goes back to the clockworkmod screen. I tried wiping data/factory reset and then re-installing the CM6 ROM, it did not work.
I really need some help here, I'm not too experienced and I don't want to brick my Evo. How do i fix this?? I am freaking out. Thank you!
I use AmonRA recovery personally and flash everything through recovery. I had too many problems when I tried flashing things through Rom Manager app. Do you have a nandroid backup? If so install the backup and then boot into recovery and reinstall CM6 and gapps back to back in the same recovery session. If no backup, download PC36IMG that corresponds with your hboot version and put it on the root of your sd card. Boot into bootloader by holding volume down and power at the same time. It will scan the sd card for PC36IMG and then verify it. It will then ask you if you want to update. Select yes and let it do its thing and then when it asks if you want to reboot select yes. This will put you back to stock and may unroot, so you may have to do the root procedure again. Then install CM6 and gapps in same recovery session.
Before all this try wiping cache and davlick cache and reboot. If that doesn't work try powering off phone through clockwork and then boot into bootloader. It will scan for PC36IMG and not find it then you will have options to boot into different things. Select recovery, and it will boot into Clockwork. Wipe cache and davlick cache and reboot. See if this works. If not you will have to nandroid or go back to stock probably unless someone that has had this problem and comes along to help you fix it. Always wipe cache and davlick when installing something new like gapps or kernels and full wipe when installing a new Rom, unless you are updating a Rom then just Davlick and Cache.
As long as the phone turns on it is not bricked.
housry23 said:
I use AmonRA recovery personally and flash everything through recovery. I had too many problems when I tried flashing things through Rom Manager app. Do you have a nandroid backup? If so install the backup and then boot into recovery and reinstall CM6 and gapps back to back in the same recovery session. If no backup, download PC36IMG that corresponds with your hboot version and put it on the root of your sd card. Boot into bootloader by holding volume down and power at the same time. It will scan the sd card for PC36IMG and then verify it. It will then ask you if you want to update. Select yes and let it do its thing and then when it asks if you want to reboot select yes. This will put you back to stock and may unroot, so you may have to do the root procedure again. Then install CM6 and gapps in same recovery session.
Before all this try wiping cache and davlick cache and reboot. If that doesn't work try powering off phone through clockwork and then boot into bootloader. It will scan for PC36IMG and not find it then you will have options to boot into different things. Select recovery, and it will boot into Clockwork. Wipe cache and davlick cache and reboot. See if this works. If not you will have to nandroid or go back to stock probably unless someone that has had this problem and comes along to help you fix it. Always wipe cache and davlick when installing something new like gapps or kernels and full wipe when installing a new Rom, unless you are updating a Rom then just Davlick and Cache.
As long as the phone turns on it is not bricked.
Click to expand...
Click to collapse
Where can I download the pc36img? Also, it seems that when I try to wipe dalvik cache, it doesn't do anything.
try here
http://forum.xda-developers.com/showthread.php?t=884060&highlight=unroot
If you are having issues getting the img on your SD card, if you have a card reader handy just use that to transfer it over
Tower1972 said:
try here
http://forum.xda-developers.com/showthread.php?t=884060&highlight=unroot
If you are having issues getting the img on your SD card, if you have a card reader handy just use that to transfer it over
Click to expand...
Click to collapse
I did find the correct one for my hboot version, but another question I have is do I need to flash unrevoked-forever-son.zip since I rooted using unrevoked 3.32? Or do I just put the PC36IMG on the sd card and flash it? Thanks.
Okay, I seem to have gotten it back to stock. Thank god, thought I lost my evo for a minute! Thanks to those who helped me out, its 4:45 in the morning and now I can finally go to bed! ;]
LOL glad ya got it back.. Yeah thats where I was heading before I seen your post..Its 5:46 am and Im not sure how many Evo people are actually on at this time so...anyway nite
I stayed on to help as long as I could, but had to go to work. Sorry I couldn't be here to help with more questions. Funny I was just getting up for work and you guys were just going to bed.
Glad you got it fixed for now. Remember to flash CM6 from recovery and not Rom Manager. Also, flash Gapps from recovery and not Rom Manager app. Flash CM then gapps and reboot. Make sure you do a full wipe first though. You could also look for Calkulin's tools thread in Dev section of EVO forum and find his wipe all zip. You just flash it like any other zip but it formats data, cache, boot and system partitions so that when you flash a new ROM nothing is left over from old one. Good luck my friend and happy flashing.
PS. I don't think the stock rom would give you s-on since you already had s-off, so you should be good to go. I could be wrong, but as long as you still have a custom recovery and s-off you should be good to flash any Rom.
evo camera
ok i have a root evo but my camara dosent work ... can some body help me to fx that problem
What rom are you using? Do they list camera issues or camera not working in the initial post with the rom?
Camera
Lets talk about the camera not working here:
http://forum.xda-developers.com/showthread.php?p=10983385
I am having lot of trouble installing Rom on my Epic 4g touch. I am not sure where I am doing wrong.
Here are the steps i followed to install a new rom
1) Installed SPH-D710.EL29_CL852097_ROOTED-oc-sfx.exe (EL29)
2)E4gtAuto Root options C and L (CWM+ Rouge)
3)Calkulins format all * also did cwm wipe
-- Now my phone is stuck at Samsung Galaxy S screen but I am able to go to download mode and/ cwm
4)Copied Calkulin\'s_E4GT_ROM_v2.8.1.zip
--When i reboot it My phone is stuck at Samsung Galaxy S 2 screen.
What ever ROM I install it just gets stuck Samsung galaxy S2 Screen
Rom's I tried
1)Calkulin
2) Unamed Rom
3)ICS leaked Rom.
Guys I really appreciate your help.
Re download the ROM and this time wipe without using the format all zip, install the ROM. If it still wont work, reinstall the recovery through Odin, that may be your problem.
1 wipe data, system, cache
2 install .zip (ROM) from sd
3 reboot.
Sounds like from your post your skipping step 2
Am i still missing something
1) Restored to pre rooted stock based on EL29 rom
2)Flashed Rouge recovery using ODIN (difference i see between auto root and ODIN based flash is I see yellow triangle)
3)Downloaded Unnamed Rom
4)Wipe (Factory reset, System,Cache)
5)Install zip from SD card(external card)
Again it stucks on Samsung Galaxy S2 screen with yellow triangle.
Thanks for your help.
update: I am able to flash Calkulin but not any other ROM
Try wiping cache and data after the new ROM install. So wipe, install, wipe, reboot.
brahmaji said:
Am i still missing something
1) Restored to pre rooted stock based on EL29 rom
2)Flashed Rouge recovery using ODIN (difference i see between auto root and ODIN based flash is I see yellow triangle)
3)Downloaded Unnamed Rom
4)Wipe (Factory reset, System,Cache)
5)Install zip from SD card(external card)
Again it stucks on Samsung Galaxy S2 screen with yellow triangle.
Thanks for your help.
update: I am able to flash Calkulin but not any other ROM
Click to expand...
Click to collapse
..Same thing happend to me yesterday...got stuck when I tried to install a addon for the Explode XE Rom...When I rebooted the System it GOT stuck on The Galaxy S2 screen...Tried everything includin removin battery several times then it would stick on the CWR screen then go into the S2 Screen...I just got fed up and rebooted thru Odin...Simple process...Then Reflashed Clockwork to get it back and then reflashed one of the older Roms and I was back in business...
Thank God for QB King77 and for all the Devs on here for makin a Fool Proof system to get u up and back runnin...without them the phone is bricked if you don't know what yur doin...
So if you do that you'll be good to go and start over on that Rom installation if you want ...I've been flashin stuff on here for a long time and thats the first time that ever happened to me...But its good to know you can always get back to point A...
Thanx again to everyone on here for their great work... help... and advice...
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Which recovery version are you using? It might a corrupted recovery.
Try this recovery TWRP is cwm flashable:
SGH-T989_TWRP_v2.2.2.0.zip - 6.72 MB
Then TDJs super wipe and then install the stock ROM or any other ROM.
http://forum.xda-developers.com/showthread.php?t=1858435
Sent from my SGH-T989 w/AOKP JB Sept-12-12 using XDA app.
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
wwwwd83 said:
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Click to expand...
Click to collapse
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
m tr4nch said:
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
Click to expand...
Click to collapse
got it all working again.. ended up odin flashing twrp 2.2 and i was able to boot into it, wipe everything, and install the new rom stuff.
Similar problem, but cannot make zips to work - HELP NEEDED
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
thatdude02 said:
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
Click to expand...
Click to collapse
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Use Odin. There is a tutorial on how to revert to stock GB (might be ICS) in the T989 development forum. It should be a sticky in that forum.
Ditto issues.. Thank good for search function. Read.. Read.. Read..
Sent from my SGH-T989 using xda app-developers app
Tried your suggestion, but Odin won't recognize my phone
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
thatdude02 said:
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
Click to expand...
Click to collapse
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
samsung jig
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
thatdude02 said:
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
Click to expand...
Click to collapse
I've heard about the jig method as well, but have no idea on how to go about doing it. Might be worth a shot. I don't think the jig costs that much anyway. I will see if I can find anything later.
Sent from my SAMSUNG-SGH-T989 using xda premium
Hi
I was flashing back to Stock from task650 to fix my gps. Well something blew up and when the phone reboots the screen goes black but I hear the AT&T start-up tune. Essentially I can't get to enable USB debugging to reflash. I can get to download or recovery, but there are no files to recover<?> and busybox never got installed.
What do I do now?
Do you have the stock recovery now? If so, try going in there and resetting to defaults. That helps sometimes.
Otherwise, you may need to Odin back to stock if you still want to go stock.
CZ Eddie said:
Do you have the stock recovery now? If so, try going in there and resetting to defaults. That helps sometimes.
Otherwise, you may need to Odin back to stock if you still want to go stock.
Click to expand...
Click to collapse
Yes I have stock recovery. Odin is of no use because it hangs waiting for the USB debug to respond. And i can't turn it on because the screen is black and I can't navigate
Do you have a micro sd card? If so, throw a rom on there. If you want to go back to stock, there' a flashable stock zip at the bottom of post #2 in the link in my signature. Under the emergency toolkit section. Flash that, turn on use debugging, do your gps fix and continue on with the task release
xBeerdroiDx said:
Do you have a micro sd card? If so, throw a rom on there. If you want to go back to stock, there' a flashable stock zip at the bottom of post #2 in the link in my signature. Under the emergency toolkit section. Flash that, turn on use debugging, do your gps fix and continue on with the task release
Click to expand...
Click to collapse
Thanks. I created an emergency tool kit on an SD, I wiped data, wiped cache and Davlik and formated system. Flashed the stock rom. When I rebooted it now hung at the Samsung Galaxy S III screen.
How do I get out of this mess?
Try wiping data and cache again in recovery
xBeerdroiDx said:
Try wiping data and cache again in recovery
Click to expand...
Click to collapse
I've wiped data and cache several times, and format/system. I've even tried to flash CWM 6.0.3.1 and I get a status 7 error. Nothing is taking.I get signature failures.
I re downloaded all the files figuring they were corrupted. Nothing doing. I need some real help, because this is beyond my abilities to figure out.,
Now I've got a red triangle showing up in recovery.
BertMor said:
I've wiped data and cache several times, and format/system. I've even tried to flash CWM 6.0.3.1 and I get a status 7 error. Nothing is taking.I get signature failures.
I re downloaded all the files figuring they were corrupted. Nothing doing. I need some real help, because this is beyond my abilities to figure out.,
Now I've got a red triangle showing up in recovery.
Click to expand...
Click to collapse
i dont know why some of these things are not working correctly for you. you're seeing the red triangle because you have stock recovery now from the stock firmware zip. you cannot flash anything in stock recovery nor can you format /system. what happens when you boot up after a factory reset and cache wipe?
a couple of your options include either using odin to flash the stock firmware back onto your device or to use odin to flash a custom recovery back and make a move from there.
xBeerdroiDx said:
i dont know why some of these things are not working correctly for you. you're seeing the red triangle because you have stock recovery now from the stock firmware zip. you cannot flash anything in stock recovery nor can you format /system. what happens when you boot up after a factory reset and cache wipe?
a couple of your options include either using odin to flash the stock firmware back onto your device or to use odin to flash a custom recovery back and make a move from there.
Click to expand...
Click to collapse
When it rains it pours. Now I can't get into recovery. I get the empty battery graphic cycling on and off, and its very warm to the touch. I think the battery is not charging.
I tried using Odin and flashed a stock rom but I kept getting verification errors and status 7 errors. Things just are not taking. I fear I've got a hard brick and I don't know what to do to fix it.
I appreciate your help
aaaaand let the questions roll:
you got verification errors in odin? and after flashing the firmware, i'm assuming you then flashed cwm and that's where you were getting the status 7 errors?
at what point did it all go off? i need to know what order you did all of these things.
can you still get into download mode?
xBeerdroiDx said:
aaaaand let the questions roll:
you got verification errors in odin? and after flashing the firmware, i'm assuming you then flashed cwm and that's where you were getting the status 7 errors?
at what point did it all go off? i need to know what order you did all of these things.
can you still get into download mode?
Click to expand...
Click to collapse
No, it won't go into download. I initially flashed stock rom, but I don't think I wiped anything. That was probably the big mistake. I used something called Samsung S3 QCom tool kit to do an initial flash. It never failed me before. And I also flashed a CWM.
I followed your advice and made a emergency SD kit and flashed from there. I did a clean flash several times. Things just never worked and I kept getting those error messages. Then it just got more difficult to get into download. Now it just flashes a drained battery
it might indeed be drained. leave it plugged in for a while and report back.
you were getting the error/status 7 messages after you flashed cwm back on it likely because the cwm wasnt up-to-date.
what was the last thing you tried before it stopped working altogether?
It gets really hot if I leave it plugged in. But it seems like I can get into recovery again. The last thing I flashed was CMW 6.0.3.1. But what is on it now is CMW 5.5.0.4
actually, what you're saying is the last thing you flashed was cwm 5.5.0.4, just via odin not cwm.
if the phone was in my hands, i would:
flash the cwm 6.0.3.1 zip, select advanced and reboot recovery. now you will be in the updated cwm recovery.
perform a full wipe: wipe data, cache, dalvik, format /system, format /data
flash rom and gapps. if you're going to stick with tasks, use the 4/23 release. i'm on that with no feature or stability issues.
wipe data, wipe cache, reboot.
give it a few minutes to boot up.
BertMor said:
No, it won't go into download. I initially flashed stock rom, but I don't think I wiped anything. That was probably the big mistake. I used something called Samsung S3 QCom tool kit to do an initial flash. It never failed me before. And I also flashed a CWM.
I followed your advice and made a emergency SD kit and flashed from there. I did a clean flash several times. Things just never worked and I kept getting those error messages. Then it just got more difficult to get into download. Now it just flashes a drained battery
Click to expand...
Click to collapse
xBeerdroiDx said:
actually, what you're saying is the last thing you flashed was cwm 5.5.0.4, just via odin not cwm.
if the phone was in my hands, i would:
flash the cwm 6.0.3.1 zip, select advanced and reboot recovery. now you will be in the updated cwm recovery.
perform a full wipe: wipe data, cache, dalvik, format /system, format /data
flash rom and gapps. if you're going to stick with tasks, use the 4/23 release. i'm on that with no feature or stability issues.
wipe data, wipe cache, reboot.
give it a few minutes to boot up.
Click to expand...
Click to collapse
Nope. When I try to flash CWM 6.0.3.1 I get an assert failed error. I came across this fix, I wonder if it is safe to try http://mobotechie.com/tips-tricks/how-to-fix-android-custom-rom-status-7-installation-abort-assert-failed-error-in-recovery-easily-ultimate-guide
BertMor said:
Nope. When I try to flash CWM 6.0.3.1 I get an assert failed error. I came across this fix, I wonder if it is safe to try http://mobotechie.com/tips-tricks/how-to-fix-android-custom-rom-status-7-installation-abort-assert-failed-error-in-recovery-easily-ultimate-guide
Click to expand...
Click to collapse
Well I think I managed it!. First I tried to install an update d/l'ed from Dropbox and that did nothing. Then I flashed an old .tar that was a rooted stock and it rebooted!
I tried editing the updater-script but I couldn't getit to save the changes properly.
Well I will now re flash the RM and CWM and hope for the best
Thanks for all your help, greatly appreciated
I rooted my phone, downloaded the jedi mind trick rom and attempted to flash it. I deleted and format my phone in CWM and i installed the rom from an internal sdcard. Now it keeps resetting and wont turn on. What should I do now?
Have you tried jamison's cache wipe?
Sent from my HTC One using xda app-developers app
Im downloading the stock telus rom in an attempt just to start from the beginning. When I flash it I'll get back to you. I was rushing when I rooted it the first time I guess.
Okay so I've done that and have rooted it using the s2 toolkit. what steps should I take to ensure the jedi mind trick rom can be successfully flashed?
Okay I tried reflashing it again... Didn't work, I have the same problem. I did the factory settings, and wiped the cache and flashed the rom. I then went into advanced and cleared the Devac (sp) cache and fixed permissions. I rebooted and it didn't work. It starts, gets to about the loading circle graphic and just resets
I used Darkside super wipe and it worked for me...
ive done it like this.
flashed original stock rom via odin
Root via S2 toolkit
flash cmw with toolkit as above
and flash custom rom via s2 toolkit
and after that used darkside superwipe
thanks for the tip, I tried the darkside wipe but it still is happening.
I have the same exact thing. But for me it's different. It started with the PACman 22.0.1. Whenever I press the power button to turn on/off the screen, it would restart a couple of seconds later being stuck in an infinite reboot loop. Can't get into recovery mode (used TWRP 2.3.3.1 and 2.5). I somehow managed to revert back to stock which worked properly. Rooted and installed PACman 22.1.1 ROM and it's still stuck on a reboot loop.
I don't know if it's a hardware problem (wiring off power button to the circuit is damaged) or a software code that messed up the machine code in the circuit.
i had the same when i installed wrong kernel and radio...try it like this..instal stock
http://forum.xda-developers.com/showthread.php?t=1513359
and then try cwm recovery version from the s2 toolkit (try non touch ver.)
and then try flashing
try doing a factory reset, wipe cache and install rom. don't wipe cache or anything after that until after it boots. btw don't use cwm wipe cache, try the one that is stickied in development forum.