TL;DR version available at the bottom of the post.
Hello, I have a Sony Xperia Play model R800at from AT&T that originally ran 2.3.3 out of the box, and I read that you can root a Sony Xperia Play by flashing the firmware to 2.3.2 then rooting it and afterwards upgrading back to 2.3.3.
So here's the kicker, I mistakenly downloaded the 2.3.2 firmware for the Sony Xperia Arc, and my phone refused to boot after flashing. Next, I downloaded 2.3.2 firmware for Sony Xperia Play from here, and after flashing that my phone was able to boot but "android.process.media" is force closing every few seconds.
I gave up on trying to root my phone and just wanted to make my phone normal again so I went in search of my phone's original firmware in order to flash that in hopes of bringing the phone back to normal and stopping "android.process.media" from crashing so much. So after searching up and down and high and low for my original R800at 2.3.3 firmware from AT&T, I couldn't find it anywhere! Does anybody have it or does anybody know how to fix my phone?
TL;DR: Stupidly flashed wrong firmware, can't find right firmware to flash. Firmware I'm looking for: USA Sony Xperia Play model R800at Android version 2.3.3 from AT&T.
Just flash the north American 2.3.3. Its way better then the att version.
Sent from my R800a using xda premium
Can you please tell me where I may get that firmware from?
EDIT: Will it come with the bloatware that came with my phone? Because I got different bloatware when I flashed the generic UK firmware and believe it or not I miss my old bloatware.
Not much bloat really. It's in the development section I think.
Sent from my R800a using xda premium
Apparently my phone was still under warranty, so I sent it in and got a new one for free so everything is all fine and dandy now. Of course, I didn't tell them that my phone was acting up because I flashed the firmware.
4G
HighJeep said:
Just flash the north American 2.3.3. Its way better then the att version.
Sent from my R800a using xda premium
Click to expand...
Click to collapse
Were you able to access 4G with Generic 2.3.3? (Did the "H+" appeared?)
Hello,
I am looking for the stock Rom for the R800AT (AT&T) Version of the Xperia Play.
When I got the phone, I rooted it then installed the R800A 2.3.3 Rom. The Rom works pretty well but it sometimes has issues with data. I am planning on selling the phone and wish to revert it to stock.
I did not make a backup but perhaps someone else did an would like to share?
Thanks
I want it too, have the R800AT 4G and installed R800A now want to rollback
Yeah Same here, I need it
here you go
Xperia_Play_3.0.1.B.0.270_ATT.rar
http://www.mediafire.com/?s7vr35v675kqomx
I am looking to return my Xperia Play which is rooted with the Generic North American R800a firmware at 2.3.3 with bootloader locked back to the Stock at&t firmware that came with as R800at. If anyone knows where i can get that so i can flash my phone back to stock and remove root in the process which is a Gingerbreak root kept by doing a OTA update from 2.3.2, i would be very very grateful. I will be returning my xperia play and forking over the money for a samsung galaxy s2 skyrocket on at&t since i am still within my 30 day return policy. Thanks again for any help with this matter.
voidlogik said:
I am looking to return my Xperia Play which is rooted with the Generic North American R800a firmware at 2.3.3 with bootloader locked back to the Stock at&t firmware that came with as R800at. If anyone knows where i can get that so i can flash my phone back to stock and remove root in the process which is a Gingerbreak root kept by doing a OTA update from 2.3.2, i would be very very grateful. I will be returning my xperia play and forking over the money for a samsung galaxy s2 skyrocket on at&t since i am still within my 30 day return policy. Thanks again for any help with this matter.
Click to expand...
Click to collapse
The galaxy s2 isn't all that but I hope you enjoy it. Just do a factory reset and delete super user app, they won't even bother looking at your software version or kernel (they wouldn't even know if it's right or wrong anyways).
Sent from my R800i using Tapatalk
Someone with that model would need to make an ftf file for flashtool, as far as I'm aware.
Sent from the best phone ever
Someone did make an at&t ftf he posted in the general section but you need to copy and paste the link into your browser
Sent from my R800a using XDA App
Okay guys so I read the other threads regarding going back to stock from cm7 and
I understand how to flash back and everything. But my problem is...when I first got my phone it was bootloader locked and it's also the r800at version. After successfully getting the bootloader unlocked I rooted and flashed the ROM Cm7.2 then noticed the model became r800i but I still have "4g" speed via H+. So I want to go back to stock with doom kernel but am wondering which ROM I need which is either the UK generic or the north America one also will I still have H+ speeds? Sorry for such a long post!! Figured that more info resulted in better reply!!
Thanks guys in advanced!! ^.^
Just flash the north American rom and put your apn settings in again and you should be good to go
Sent from my R800a using XDA App
Hey guys, I was hoping I would'nt have to do this but i'm at a loss now.
I own the blue xperia play 4g phone and currently using it with straight talk service with their unlocked sim. Everything was fine until I decided to start trying out custom roms.
No matter what I tried, I could get them to load, work , function ect BUT I had weird issues where people could not hear me for the 1st call, but if I called them right back they could. It just seemed to be random and I could'nt put my finger on it.
So I flashed back to the stock 2.3.3 R800AT firmware, and then updated thru their Sony patch they made me do on the phone...and everything was fine again.
Well I got adventurous again, and UNLOCKED my bootloader. So NOW....after doing custom roms, I CANNOT reload my old R800at 2.3.3 firmware and get the OFFICIAL update from them. So i'm stuck with an upgradeable working 2.3.3 (this is the 2.3.3 before the update they put out, I know it does'nt go to 2.3.4. but its some kinda 2.3.3 update) with NO further updates.
So after tons of research i'm HOPING its the baseband I need ??? I dont know what else to do. Only other option is if some kind soul wants to send me over their AT&T r800AT 2.3.3 UPDATED firmware I'll just go back to stock but i'd prefer to keep using my custom roms!!!
***maybe if someone who has the blue xperia play 4g version, would post the "baseband" version they see on their phone, even that would help!!!***
Any help would be great and more than appreciated.
God bless and thanks guys,
Jason
jaygrae said:
Hey guys, I was hoping I would'nt have to do this but i'm at a loss now.
I own the blue xperia play 4g phone and currently using it with straight talk service with their unlocked sim. Everything was fine until I decided to start trying out custom roms.
No matter what I tried, I could get them to load, work , function ect BUT I had weird issues where people could not hear me for the 1st call, but if I called them right back they could. It just seemed to be random and I could'nt put my finger on it.
So I flashed back to the stock 2.3.3 R800AT firmware, and then updated thru their Sony patch they made me do on the phone...and everything was fine again.
Well I got adventurous again, and UNLOCKED my bootloader. So NOW....after doing custom roms, I CANNOT reload my old R800at 2.3.3 firmware and get the OFFICIAL update from them. So i'm stuck with an upgradeable working 2.3.3 (this is the 2.3.3 before the update they put out, I know it does'nt go to 2.3.4. but its some kinda 2.3.3 update) with NO further updates.
So after tons of research i'm HOPING its the baseband I need ??? I dont know what else to do. Only other option is if some kind soul wants to send me over their AT&T r800AT 2.3.3 UPDATED firmware I'll just go back to stock but i'd prefer to keep using my custom roms!!!
***maybe if someone who has the blue xperia play 4g version, would post the "baseband" version they see on their phone, even that would help!!!***
Any help would be great and more than appreciated.
God bless and thanks guys,
Jason
Click to expand...
Click to collapse
Oh my friend, you are in the same boat as me. xD
All you need to do is get the stock 2.3.3 AT&T firmware, But you can also use r800i firmwares and update to 2.3.4 with the latest firmware.
Theres a thread somewhere containing the firmware, if not you can find it on google.
(Which is what im doing right now with straight talk) only negative thing I see is so far H instead of H+.
Dito on the baseband, the flashtool links with FTF 2.3.3 is down my phone is softbricked though
Cetus90 said:
Dito on the baseband, the flashtool links with FTF 2.3.3 is down my phone is softbricked though
Click to expand...
Click to collapse
If alejandrissimo unlocked your phone you should have OTA updates. If you unlocked it with another method then im not sure what to tell you, gotta find the updated FTF files.
Guys good news here
I was correct in thinking it was the baseband on our phone that is causing the problem. I think its due to the fact we are 4g rather than 3g.
So how did i fix this problem??? Simple. I was able to use the doomkernel v13 (any seem to work), actually install the rom of choice, (i'm using Jokawild 2.5), and then downloaded/installed baseband file -36.
I also installed the -36 libs package that was somewhere posted on here its the new .386 version.
Everything is working now and i'm happy. Going to save the baseband/lib files so i have them forever incase something happens.
Take care, God bless and thank you for your input/time. I could'nt go another day with them stock at&t roms!!!!
jaygrae said:
Guys good news here
I was correct in thinking it was the baseband on our phone that is causing the problem. I think its due to the fact we are 4g rather than 3g.
So how did i fix this problem??? Simple. I was able to use the doomkernel v13 (any seem to work), actually install the rom of choice, (i'm using Jokawild 2.5), and then downloaded/installed baseband file -36.
I also installed the -36 libs package that was somewhere posted on here its the new .386 version.
Everything is working now and i'm happy. Going to save the baseband/lib files so i have them forever incase something happens.
Take care, God bless and thank you for your input/time. I could'nt go another day with them stock at&t roms!!!!
Click to expand...
Click to collapse
Hello hello, I need your help. I've got the generic North Am. 2.3.4 (.42) and I'm having this problem. I've got an unlocked bootloader and I want to install the baseband file. Can I do that with a generic rom? What is the process for installing a baseband file and libs package? Where can I get these files? Thanks.
SonyFanboy said:
Hello hello, I need your help. I've got the generic North Am. 2.3.4 (.42) and I'm having this problem. I've got an unlocked bootloader and I want to install the baseband file. Can I do that with a generic rom? What is the process for installing a baseband file and libs package? Where can I get these files? Thanks.
Click to expand...
Click to collapse
I think I have the same or a similar problem. I frequently encounter a similar situation where it could take 10+ seconds before the other person can hear me speak, but I can hear them the whole time. By now most of my friends and family know how to deal with it, but before they would just hang up on me. Then they could hear me if I called them. If I reboot the phone, it fixes it for a while, but then it comes back after some time and takes another reboot to resolve.
My phone is a SIM unlocked, bootloader locked Xperia Play R800a model from last year's Google I/O. It uses the same frequencies as AT&T for 3G and 2G and I'm using it on AT&T as well. I have the Generic North America 4.0.2.A.0.42 (Android 2.3.4) ROM installed, and it has Baseband 8x55A-AAABQMAZM-203028D-56.
I found a separate thread with the -36 Baseband here:
http://forum.xda-developers.com/showthread.php?t=1469473
I'm considering flashing this over my current -56 Baseband to see if it improves the situation. As I recall, I never had this sort of trouble when I first got the phone. It's really only been since I updated to Firmware .42 that I've had these problems. Is it safe to do this?
Thanks!
MechaBouncer said:
I think I have the same or a similar problem. I frequently encounter a similar situation where it could take 10+ seconds before the other person can hear me speak, but I can hear them the whole time. By now most of my friends and family know how to deal with it, but before they would just hang up on me. Then they could hear me if I called them. If I reboot the phone, it fixes it for a while, but then it comes back after some time and takes another reboot to resolve.
My phone is a SIM unlocked, bootloader locked Xperia Play R800a model from last year's Google I/O. It uses the same frequencies as AT&T for 3G and 2G and I'm using it on AT&T as well. I have the Generic North America 4.0.2.A.0.42 (Android 2.3.4) ROM installed, and it has Baseband 8x55A-AAABQMAZM-203028D-56.
I found a separate thread with the -36 Baseband here:
http://forum.xda-developers.com/showthread.php?t=1469473
I'm considering flashing this over my current -56 Baseband to see if it improves the situation. As I recall, I never had this sort of trouble when I first got the phone. It's really only been since I updated to Firmware .42 that I've had these problems. Is it safe to do this?
Thanks!
Click to expand...
Click to collapse
I wanted to add that on Friday I installed the -36 baseband with mine and I'm getting 4G+ (I hit 12MBs at mobilespeedtest.com). And my calls have stopped being cut off.
SonyFanboy said:
I wanted to add that on Friday I installed the -36 baseband with mine and I'm getting 4G+ (I hit 12MBs at mobilespeedtest.com). And my calls have stopped being cut off.
Click to expand...
Click to collapse
Awesome! That's also funny because I also installed the -36 baseband last night. So far, so good. Calls and data both work as normal. I'll need to do more testing to be sure whether it fixed my problem or not.
Now did you just install the baseband or did you also flash or push the libs to it as well? All I did was use Flashtool to flash the baseband .ftf file.