<SOLVED> Help!!!! data connection kills my wildfire!!! - Wildfire Q&A, Help & Troubleshooting

Hello all guys!
Thank you a lot for the work that are you doing, sharing to all of us how we can make our phones free...
Recently i found xda-forums and because i own a wildfire, i wanted to make it better.
I started reading and i learned how to make things better... S-off my phone, rooted, completly wipe internal memory and flash a new rom. All good.... i had GPS problems first time, but i managed to fix it... anyway... Now i have a REAL PROBLEM...
A few days ago i flashed CyanogenMod7 nightly #232, after a full wipe. All good, but now i can't use it because data connection kills it... it doesn't matter what i do, but when i try to use browser/e-mail/market or any app that uses internet the same thing happens: reboot or power down.
I restored my stock froyo nandroid wich i had, same thing... Anybody knows a way to fix it??? please help me out, tethering phone's data connection was my getaway, but now it reboots my phone...
Here are my phone specs:
Phone: HTC Buzz Wildfire
S.OFF:Revolutionary
Hboot:[6.01.1002]
Recovery: [v.5.0.2.0] ClockworkMod Recovery
ROM: [2.3.7] CyanogenMod7-NIGHTLY-buzz #232
Kernel:[2.6.35.14]-nFinity [email protected] #1
Radio: [13.55.55.24H_3.35.20.10]
OC: SmartAssV2 min:[264]Mhz max:[691]Mhz
Jit=yes
VM Heap size: 32m
Help!
Edit: flashed the previous CM7 kernel (2.6.32) -> nothing happens
reflashed radio, still nothing... flashed 3.35.19.25 radio... still nothing...
Edit 2: now i see that if i connect phone to power socket, stays awake... i can use internet only with the phone. tethering still reboots my phone...
Final edit: Problem solved, i sent the phone to the sellers and after a failed attempt (where they thought that a sw update and a screen protector can make me happy), they figured out that all the phone needed is a new battery... they sent me the new one, and now all works just fine... i'm happy again, now i'm searching new tweaks for the BuzzFire... thx all who tried to help me out , special thx to 3xeno

Anyone can help? Desperate user here, guys!!! I'll pray for you... i just search for an answer but i cannot find a thread with the same issue or something close to it... Pleaseee!!!

HappyWILDFIRE said:
Anyone can help? Desperate user here, guys!!! I'll pray for you... i just search for an answer but i cannot find a thread with the same issue or something close to it... Pleaseee!!!
Click to expand...
Click to collapse
Does it reboot when you just turn the dataconnection on? and are you using v6turbocharger or the 3gturbocharger scripts?

Some options:
1. Reflash radio file to your phone
2. Get a official release of cyanogenmod
3. Make sure you wipe data/cache/dalvik before you flash the rom
Hope this helped, if it did please press the thanks button!
---------- Post added at 03:08 PM ---------- Previous post was at 02:56 PM ----------
Also partition your sd card! A lot of the time this helps!

dud3me said:
Does it reboot when you just turn the dataconnection on? and are you using v6turbocharger or the 3gturbocharger scripts?
Click to expand...
Click to collapse
no, i don't use v6turbocharger or 3g turbocharger... i don't need them, phone acts verry well without those scripts...
The phone dies few seconds after i enable data connection...
i also tried to read from the "Adb logcat" but i don't understand a s##t

mrweqa said:
Some options:
1. Reflash radio file to your phone
2. Get a official release of cyanogenmod
3. Make sure you wipe data/cache/dalvik before you flash the rom
Hope this helped, if it did please press the thanks button!
---------- Post added at 03:08 PM ---------- Previous post was at 02:56 PM ----------
Also partition your sd card! A lot of the time this helps!
Click to expand...
Click to collapse
I have 3 zips of CyanogenMod7 nightly (#202 #220 #232)... i allways perform a full wipe before i flash the rom... i reflashed all 3 radios from http://forum.xda-developers.com/showthread.php?t=1029318 ... same result...phone get killed or rebooted...
Now after a full wipe i have restored only Boot.img and System.img from my original Froyo nandroid backup, so basically i belive that could be a fresh install of the original Sense Froyo... the kernel is the original Htc kernel... but i still have the same problem... phone get killed after enabling data connection... i don't know why phone acts like this... All this "phone dies" story started suddenly... one day i woke up and the phone started acting like this... i think it hates me
Partitioning card helps?? i'l give it a shot... i'll tell you if it works... thx in advance...

wiped dalvik cache and cache... patition - 128 mb ext - 32 swap... nothing... same prob...(((((

Partitioning an SDCard can prevent freeze ups / network issues? That is a new one!
On topic, try flashing an RUU and check for the issue when on the stock ROM. I can't find the post, but it worked for someone else who was facing similar issues,

3xeno said:
Partitioning an SDCard can prevent freeze ups / network issues? That is a new one!
On topic, try flashing an RUU and check for the issue when on the stock ROM. I can't find the post, but it worked for someone else who was facing similar issues,
Click to expand...
Click to collapse
since i am a noob... i try all the suggestions... even for me sounded strange... anyway... i choose the RUU_Buzz_HTC_WWE_1.14.405.2_R_Radio_13.45.55.24_3. 35.15.31_release_130814_signed.exe, since i don't know what i had in my phone when i bought it, and i don't want to use a Froyo RUU because i'm afraid i won't be able to S-OFF and root my phone again... but another question... If i have HBoot:6.01.1002, the RUU is able to downgrade the HBoot, or i have to make it myself?... thx @3xeno... in advance... i hope this will solve my phone disease...
Edit: When i bought it, the phone had Sense 2.1 Eclair, but i made the 2.2.1 in-phone software update (dhaaaa)... i'm happy i managed to s-off it after that... and i didn't used AlpharevX (i had no idea at that time), i used "revolutionary-0.4pre4"...

You can use a Froyo RUU (WWE 2.22.405.1). The HBoot will not be touched. (You will lose Clockworkmod Recovery though, but, since you know how to use Fastboot, it shouldn't be an issue at all I am assuming). Also, your device, except the SDCard, will be formatted, so make sure you have your important stuff backed up.

3xeno said:
You can use a Froyo RUU (WWE 2.22.405.1). The HBoot will not be touched. (You will lose Clockworkmod Recovery though, but, since you know how to use Fastboot, it shouldn't be an issue at all I am assuming). Also, your device, except the SDCard, will be formatted, so make sure you have your important stuff backed up.
Click to expand...
Click to collapse
I learned this things thx 2 u... i have backups... fastboot... now i have to download the RUU... i'll tell you if it works in a couple of days... i have a poor bandwidth ( +>- 5KBps)... i'll pray to all the Gods i know (i'm christian but doesn't matter, maybe my God doesn't now a shee about ANDROID) ... i'll make you know if it worked, if not, i'll apply the RUU, downgrade Hboot, and i will go in the shop where i bought the phone and ... i'll make it pieces in front of the sellers... or request for warranty... am i correct?

Yes, do that, definitely if the RUU method doesn't work as well.

Anyway, it doesn't matter my data... if the phone doesn't work as it should, i don't think data is so important... data is a thing that can be refound... a phone with unknown issue.. is a really phookin' problem... the incredible thing is the fact that the phone works quite well without data connection... rarely app FC's, smooth UI... i'm amazed... did'n tried wifi... i will... maybe will work...

3xeno said:
Yes, do that, definitely if the RUU method doesn't work as well.
Click to expand...
Click to collapse
sorry for stressing you with questions... assuming that i may have some little knowledge (i think) about android and wildfire... let's say that RUU does his job... but what really does an RUU?? Rom update utility... removes clockworkmod+ performs a fresh install of an original HTC rom+ sometimes upgrades or downgrades HBOOT+S-on's the phone...
this stuff we can do it via Fastboot and adb... I have my original rom... i backed it up when i thought that AOSP ROM is something that definetly phone needs ( well i can say that: yes... it needs... <3 CM7NB)
so... if i "advanced" restore my Sense nandroid (only boot+system) after a full and complete wipe( i performed the wipe via clockworkmod-->mounts and storage--> all "format" options+ yes + wipe Dalvik cache + reboot in HBOOT -clear storage= phone boots and reboots in HBOOT... cuz there's no boot or operating system)... it means i have the original stock froyo... without configurations and stuff like that... am i correct?

Yes you can do that, but with an RUU, you are practically guaranteed a clean install. It's a good way to point out where exactly an issue potentially lies.

3xeno said:
Yes you can do that, but with an RUU, you are practically guaranteed a clean install. It's a good way to point out where exactly an issue potentially lies.
Click to expand...
Click to collapse
That's the point... ( linked to my phone issue)... if it's not the kernel or the radio or the custom recovery... remains the hboot... in your opinion can this be the problem?? sorry if i'm stressing you again...let's make this thread useful and discuss all the aspects... for the future, in case that this can be useful for all the community of XDA... maybe is pointless... but i wanna learn, and this is a verry good subject to discuss(i think)
While i wait that RUU to download (14% of 130+MB)
I think that since my nandroid is clean...(btw... i made a factory reset before making the Stock Froyo nandroid) and i know that data connection worked before and after... it just doesn't make sense for me why the RUU can fix things...

Sorry, but I am not so technically proficient as to go in depth and explain stuff, because, I myself don't know about it. I suggested something that has been known to work for others, and, it stays just that - a suggestion. It's totally upto you what you wish to do, what you wish to experiment etc. Its your device and your wish.
Hopefully, someone with in-depth knowledge of how stuff works can explain these to you.

3xeno said:
Sorry, but I am not so technically proficient as to go in depth and explain stuff, because, I myself don't know about it. I suggested something that has been known to work for others, and, it stays just that - a suggestion. It's totally upto you what you wish to do, what you wish to experiment etc. Its your device and your wish.
Hopefully, someone with in-depth knowledge of how stuff works can explain these to you.
Click to expand...
Click to collapse
yeah... if someone can explain, or i'll keep search for it till i find the explanation myself... man, thx for your advices (not suggestions) as i know that you understand more than i do this things, at the end i am a beginner in Android, also in XDA, i don't try to be rude or disrespect anyone, and most of all, i don't want my questions to be seen as stupid questions... i am a user that wants to know more...
Thx for your time and advices man!!! God Bless you!!

RUU installed, but issue not resolved
Bad news... looks that the RUU (2.22.405.1) did remove the custom recovery, flashed new radio and flashed the stock Froyo rom... didn't touch the hboot... but my phone is not cured... still dies few seconds after i enable data... i'll try to downgrade the Hboot to 1.01.0001 S-ON to see if the problem is resolved, if not, i think it may be a hardware problem and i hope i can send it for a warranty intervention... God!!! Why are you doing this to me?!!

I had it wrong doesn't matter.

Related

Power button reboots phone with Skyraider 3.3

Hey all
I've searched for an answer to my problem but have been able to find it. Anyway, I have tried about 8 different ROMS over the past month or so and Skyraider is easily my favorite. However, I had to remove due to the fact that whenever I would try to power down the device, it would reboot instead.
I've tried installing both manually and from ROM manager with the same outcome. I've cleared date & davlik and performed full wipes each time. My last hope was fixing permissions but that failed to correct the issue as well.
Again, I really enjoy using this ROM and do not relish the thought of not being able to use it. Does anyone have any thoughts on a possible fix?
patsfan1130 said:
Hey all
I've searched for an answer to my problem but have been able to find it. Anyway, I have tried about 8 different ROMS over the past month or so and Skyraider is easily my favorite. However, I had to remove due to the fact that whenever I would try to power down the device, it would reboot instead.
I've tried installing both manually and from ROM manager with the same outcome. I've cleared date & davlik and performed full wipes each time. My last hope was fixing permissions but that failed to correct the issue as well.
Again, I really enjoy using this ROM and do not relish the thought of not being able to use it. Does anyone have any thoughts on a possible fix?
Click to expand...
Click to collapse
You sure its Skyraider? That happened to me... Phone wouldnt shut off, if your in dark you can see the screen doesnt even shut down. With me though, it would shut off if plugged in.. Turned out the phone was damaged, a power surge damaged it. Got it replaced. If you flash another rom and it still wont shut down, then your gonna need a replacement.
Thanks for the response Mike. No, It does not happen with any other ROM I flash. Been bouncing between CM, Virtuous and uncommon for a week now and the power button works as it should.
I dunno, I realize I am a n00b with all of this but it simply doesnt make sense to me
Again, Thank you for the response
What radio are you using? A lot of people using 2.05 were having that issue and it went away when they upgraded to a 2.15 radio baseband.
No problem. But what you have going on is very odd, i wasnt aware that a ruu could do that. Try upgrading to the latest radio.
That's the baseband version correct? Sorry, I'm not too saavy with radios. Anyway..it says 2.15.00.07.28
patsfan1130 said:
That's the baseband version correct? Sorry, I'm not too saavy with radios. Anyway..it says 2.15.00.07.28
Click to expand...
Click to collapse
Yes, that's the baseband version and you should be good to go with the one you are using. The only other things I can come up with is to ensure you are S-OFF and running HBOOT 0.79 or higher.
Please forgive my ignorance here. I am definately S-off but I am unsure how to see what HBOOT I am running. I go into recovery but I dont see any version.
patsfan1130 said:
Please forgive my ignorance here. I am definately S-off but I am unsure how to see what HBOOT I am running. I go into recovery but I dont see any version.
Click to expand...
Click to collapse
Not a problem. This is how we learn. To find your HBOOT version power down then reboot into recovery. When you get to the white recovery screen look in the top left corner. The first line should state S-OFF and the second line should state your HBOOT version.
I was really hoping I would see it lower than 0.79 but it's 0.92. ah well..I suppose it's simply my phone doesn't play well with this ROM.
Thank you for the suggestions
I had this happen to me on Skyraider 3.3 after I tried to install a taskbar or battery icon from his older roms. Try just the stock rom for now until he updates.
patsfan1130 said:
I was really hoping I would see it lower than 0.79 but it's 0.92. ah well..I suppose it's simply my phone doesn't play well with this ROM.
Thank you for the suggestions
Click to expand...
Click to collapse
Well that's unfortunate. I read a couple of posts in the Skyraider thread that sounded as though a couple of people had the "recommended" setup (like you) but also had the reboot problem. Those posts seemed to get no response so I guess there was no fix found. Most of the discussion on this problem starts around post #2432 in the Skyraider thread if you want to do some more digging but I couldn't really find anything more.
Some other factors to consider:
When you first flashed the ROM did you wipe all data? (factory reset, wipe data cache, wipe dalvik cache).
If you flashed a custom kernel, try going back to the stock kernel.
What version of ClockworkModRecovery are you running? They released a buggy update a couple of weeks ago and it was pulled shortly after release so if you have a version higher than 2.5.0.5 then you should revert to an older version of CWM.
You could flash the 2.15.00.09.01 radio baseband but I don't think it would make a difference with this problem. Also, if you screw up or accidentally flash the same radio over itself then you will have a brick so use extreme caution if you decide to go that route.
That pretty much exhausts my knowledge on the subject so if everything is as it should be then you could always try wiping everything and flashing the ROM again.
RebelShadow said:
I had this happen to me on Skyraider 3.3 after I tried to install a taskbar or battery icon from his older roms. Try just the stock rom for now until he updates.
Click to expand...
Click to collapse
I didn't think of that but definitely a possibility. Good call.
Best of luck.
RebelShadow said:
I had this happen to me on Skyraider 3.3 after I tried to install a taskbar or battery icon from his older roms. Try just the stock rom for now until he updates.
Click to expand...
Click to collapse
Well wouldn't you know it! Problem solved
I did not know the add ons were not compatible
Thanks everyone!
I'm glad I was able to help...
Really though, good to hear you got it working. Enjoy.

[Q] Need help flashing ROM - Desire

Ok, basically I discovered cyanogen 7 about a week ago and was pure ''
well since then I have gone from knowing nothing at all to having a rooted 2.2 (stock rom) GSM desire (A8181 - whatever that actually means), S -ON
I rooted with unrevoked and have clockworkmod 2.something.
now from what i understand I need to S -OFF so that I can use a program (run on the phone from ROM manager) to upgrade clockwork to 3.x then (correct me if i'm wrong, I'm a total noob dont forget xD) I can use ROM manager to download CM7 and instal all on the phone?
is that right? if not could someone please correct me
I've done a NANDroid backup
i think thats all i want to say :')
I get confused when browsing forums because people talk about things, especially abbreviations, that mean nothing to me xD
Thanks for the help guys
spears93 said:
Ok, basically I discovered cyanogen 7 about a week ago and was pure ''
well since then I have gone from knowing nothing at all to having a rooted 2.2 (stock rom) GSM desire (A8181 - whatever that actually means), S -ON
I rooted with unrevoked and have clockworkmod 2.something.
now from what i understand I need to S -OFF so that I can use a program (run on the phone from ROM manager) to upgrade clockwork to 3.x then (correct me if i'm wrong, I'm a total noob dont forget xD) I can use ROM manager to download CM7 and instal all on the phone?
is that right? if not could someone please correct me
I've done a NANDroid backup
i think thats all i want to say :')
I get confused when browsing forums because people talk about things, especially abbreviations, that mean nothing to me xD
Thanks for the help guys
Click to expand...
Click to collapse
not an expert on the S-OFF side of things but ive been flashing various ROMS without ever needing to S-OFF.
Been using LeeDroid and now GingerVillain (and tried a few more along the way).
For info the GingerVillain has CM7 stuff in it and is pretty stable. Once you have flashed GingerVillain once it has its own setup for flashing updates/patches etc.
But you are right to always take a nandroid backup first. the one time i forgot my flash screwed up
wilbur-force said:
not an expert on the S-OFF side of things but ive been flashing various ROMS without ever needing to S-OFF.
Been using LeeDroid and now GingerVillain (and tried a few more along the way).
For info the GingerVillain has CM7 stuff in it and is pretty stable. Once you have flashed GingerVillain once it has its own setup for flashing updates/patches etc.
But you are right to always take a nandroid backup first. the one time i forgot my flash screwed up
Click to expand...
Click to collapse
That's sound advice because I'm not set on cyanogen however I don't know how I'd go about flashing GingerVillain :')
And how sure are you it's alright with S-ON because I don't like the sound of a £250 paperweight
thanks though
well ive never changed my S status .....
Download ROM Manager from the Market. Make sure you install clockworkmod recovery (using ROM Manager). Backup current ROM (using ROM Manager). Download GingerVillain latest version. Flash ROM from SD card (using ROM Manager)
Any future updates to GingerVillain you can use the 'Villain Setup' utility that you will find in your app list once the Flash is complete.
If its your first ever flash be aware that you should make sure the battery level is high, and that it may take several minutes (so dont panic !)
As long as you backup first everything should be fine (although there is always some risk).
Once you have finished your first Flash it will seem like you were worried about nothing
Oh ... and if you would prefer to stay with Froyo the LeeDroid ROM has a very good A2SD version
that sounds.... easy
thanks
and ROM manager says i already have CwM 2.5.0.7 -- so thats all cool, yeah?
Will my NANDroid backup count or shall I just do it again in ROM manager?
and I'm guessing I can download GV from within ROM manager?
sorry to ask all the newb questions but i'd rather be sure lol
Ive never bothered downloading ROMs from within ROM Manager but I believe you can.
As for the backup Id copy your existing backup to your PC and do another. You can never have too many backups
The backup will be in a sub folder on your SD card in a 'clockworkmod' directory.
oh ... and it generally is easy its just summing up courage for the first one.
Might be worth using titanium backup or my backup pro to take a copy of your apps if you dont want to lose where you have got to on Angry Birds etc
you can then restore them to your new ROM
Thanks
my phone is off to charge quicker at the minute then i'll give it a shot
one last question to be extra annoying
if i can't download GV within ROM man.
..could you provide a download link for me to manually slap in on my SD please
Seriously though, I'm really grateful!
They are all under the Desire Android dev sub forum.
http://forum.xda-developers.com/showthread.php?t=880465
FINALLY about to do it and I've just thought..
Im on clockwork 2.x
don't i need 3.x for ext4 which makes gingerbread more stable?
also, ROM manager didn't have GV so i downloaded the zip from the link you gave me and extracted it to the root of my SD
rom manager doesnt find the image file, only the 3 folders
..and i feel really stupid :')
[edit 5 mins later]
NOT unzipping it was a better idea, its working now
...my excuse is that im learning
Good thing it worked for you. Some users have reported a host of problems flashing ROMs from ROM Manager. I'd advice you to do it the tried-and-tested old way: through Recovery (which in your case is ClockworkMod).
If you decide to repartition, ROM Manager can do that too, but that's not too advisable either, as some have reported problems with that method, and ROM Manager only allows up to 512Mb partitions, if I remember right.
funny that ^
ROM manager ended up leaving me on the white screen with the green HTC logo untill i pulled the battery
i did it through recovery and it worked a charm
just went through ALL of the settings and i LOVE it
there are a few things i dont like but i'm yet to try different themes etc yet
I'm a happy bunny!
Glad you managed the Flash OK
Never experienced any problems with ROM Manager myself ....
Thing is, now you have recovery and a nadroid backup you are fairly safe. Anything goes wrong you can recover to a previous image from recovery
I always keep a nadroid on my SD card just in case
Of course if you try S-OFF and all sorts of HBOOT changes then you expose yourself to more risk apparently so be careful.
Happy Flashing
oh ... and if you are on GingerVillain go to the Villain Setup and flash the adfree add on. For me it always takes 2 attempts to work, which is strange, but adfree is great
and on GingerVillain you also might want to flash the 'new market' add-on too ...
.... and then there are the Kernels to try too
A week from now you will wonder what you were worried about and will be flashing daily
wilbur-force said:
Glad you managed the Flash OK
Never experienced any problems with ROM Manager myself ....
Thing is, now you have recovery and a nadroid backup you are fairly safe. Anything goes wrong you can recover to a previous image from recovery
I always keep a nadroid on my SD card just in case
Of course if you try S-OFF and all sorts of HBOOT changes then you expose yourself to more risk apparently so be careful.
Happy Flashing
oh ... and if you are on GingerVillain go to the Villain Setup and flash the adfree add on. For me it always takes 2 attempts to work, which is strange, but adfree is great
and on GingerVillain you also might want to flash the 'new market' add-on too ...
.... and then there are the Kernels to try too
A week from now you will wonder what you were worried about and will be flashing daily
Click to expand...
Click to collapse
I'm already wondering it
I though last night (well, 4.20 this morning) that I might bite the bullet and try flashing cyanogen
-which i did with sucess
then downloaded the google add on pack and added that
I felt all happy like
onr of my friends did his hero at the same time too because he was interested when i showed him
I think for now I'll keep cyanogen, but i've left it in note form: no homescreens properly set up, very few apps etc, until i find a ROM that I really like the look of
I'll keep ginger in mind though, especially as i hadn't tried the stuff you mentioned above
Hi there,
Saw the thread and thought i could help you with some information.
S-ON/OFF refers to Signature Verification on or off. S-ON stops things that the phone manufactuer do not want changed. It is totally separate to Root access to android. The main advantage of turning S-OFF is that you can change the size of the partitions on the device to give you more space for you apps. Basically playing around here can be dangerous if you are not aware of what it's actually doing at all times.
The great news is that as you have already discovered, you definately don't need to play with S-OFF to flash ROMs. Just root access and a recovery. The ClockworkMod 2.0.5.7 that comes with the Unrevoked root method should is fine for flashing all ROMs from ROM manager or by booting into recovery. But if any of your ROM instructions call for later versions you can just store the later version zip on your SD and use the older recovery to flash the newer version. It will be usable until your phone re-boots. You can't flash the image of the new recovery without S-OFF
Glad to have you experimenting in the community. I think this sort of stuff is exactly why Android is excellent. Apple hate that people Jailbreak their phones but Google openly encourage this development!
Thanks Jimmy
I flashed GV again (because i'm getting a bit carried away now ;D) and tried to install new market, adfree and a 3d desire bootlogo. I've got debugging and unknown apps enabled but it says there is a problem downloading?
Any idea why?
hmmmm.... not seen that one. Have you tried wifi and 3G ? whats the exact message ?
Did you wipe between flashes ? you dont normally need to do this when flashing updates (eg gingervillain 2.0 to 2.1) but when flashing between different ROMs (eg CM to GV) then you should do a full wipe ....
jimmytheflea said:
Hi there,
Saw the thread and thought i could help you with some information.
Click to expand...
Click to collapse
Great summary! I definitely recommend s-off as I found it as easy as root.
I have close to 300mb free on internal and usually over 200mb free ram.
You can also change the HTC quietly brilliant (should be "loudly" if you ask me!) splash screen after s-off, and write to any of your device partitions, including /system and /data while booted, saving some time using advanced for certain tasks.
Click to expand...
Click to collapse
spears93 said:
Thanks Jimmy
I flashed GV again (because i'm getting a bit carried away now ;D) and tried to install new market, adfree and a 3d desire bootlogo. I've got debugging and unknown apps enabled but it says there is a problem downloading?
Any idea why?
Click to expand...
Click to collapse
Is that just the market message telling you there is a problem downloading?
My best guess is that there is a setting in GV that allows direct install to the SD-ext partition for apps. Do you have an EXT2/3/4 partition on your SD card?
When ROMs talk about A2SD, Data2EXT and Data2SD the EXT partition is required.
have a look at the blog for the Starburst ROM for desire for a great tutorial (can't post an external link in here)
It is for a specific ROM but the process is the same. I would recommend using EXT3 because it is the most compatible with ROMS.
See how you go with that.

[Q] Still on Froyo. Want to change!

Hello,
Why posting a subject that is probably already posted?
I know that this subject has been dealt with many times before, but I read a lot in the forum and I still don't know really how to make the upgrad.
Causes :
- I'm frensh so it's more difficult to me to understand and there is no such good websites in frensh langage unfortunatly.
- Also, I am a NEWBIE, so when I read HGY or FGTR, BGT, PMOO... I don't get it at all. The tutorials are full of these words-sentence, abreviations. When it's one or two i can make it, but when all the tutos are full of it, it's become hard.
- An other point is that I don't have internet connexion in my phone. I could connect it with some Wifi but difficultly. I don't know if it's really important by the way, but in many tutos, they said to take things from the google store. Can I just download all the things I need in my computer?
Now the Question :
How to move on a better version of Android?
I don't want to have the latest versions, I just want a GingerBread 2.3 version with a stable rom.
Caracteristics :
Android version : 2.2
Kernel version: 2.6.32.15
Build number: 2.22.75.3
Software number: 2.22.75.3
I bought my HTC Desire 1 year ago from a friend, I think that it's rooted because when I turn it on, I have these screens: Joker - Why So Serious? (S-OFF AlphaRev)=> Orange => My desk finally
Thank you very much for your help!​
Yeah I think you're rooted too but we gotta see if you have a recovery installed or not to do that just turn off your phone then hold vol down + power button and then the bootloader will come. In there your phone well only work with vol up/down button and the power button so with them navigate through the menu and find "recovery" and press the pretty button to activate it. Wait for the recovery page to come if there is a recovery installed you will see it then and if not, there will be a picture trying to address the fact that there's no recovery installed on your device. If there's a recovery regardless of it version, just navigate through the android development section and download one (the how is written there but most of them work like this: download the ROM .zip file> put it in the sd card> go to recovery mode> find the option which address wiping or formatting the system partition, the bootanimation and the cache partition and format them> then find the wipe dalvik cache option and wipe it> now find the option which address installing zip from sd card> explore your sd card and select the .zip file and flash it then reboot and you're good to go)
By the way you must (in the same way).flash the latest radio first (before flashing the ROM I forgot that cuz you just have to do it once till its updated again which will never be cuz desire is outdated device for HTC)
Hope I could help, any question feel free to ask, I will respond add soon as I see it.
Sent from my HTC Desire using Tapatalk
If I helped you why don't you thank me by hitting the Thanks button!!
Thanks!
By installing a rom for exemple like MildWild based on Oxygen 2.3.2 directly on my phone with my Froyo and my kernel unupgraded. Will I upgrade my android and kernel and every thing related?
Or should i upgrade each thnig alone?
I'm a Newbie and I know it​
midy said:
Thanks!
By installing a rom for exemple like MildWild based on Oxygen 2.3.2 directly on my phone with my Froyo and my kernel unupgraded. Will I upgrade my android and kernel and every thing related?
Or should i upgrade each thnig alone?
I'm a Newbie and I know it​
Click to expand...
Click to collapse
No, greatly advanced users flash kernels separately themselves too but there's a kernel in each and every ROM you flash to your phone, btw you have a recovery installed or not?
Sent from my HTC Desire with BCM 3.7U0 ICS ROM using Tapatalk
I sent you an private message where I explain much things
I have done what you told me and I found the recovery.
So I must now begin by flashing the radio and after I can install the rom?
To keep my contacts and my messages, settings... Should I do something precisely or it's saved?
Do you have any other things you would like to change besides your android version? Like the small internal memory for instance? Also what kind of android would you like? Something purest as possible, one with HTC Sense, or MIUI(look at screenshots in development section)?
---------- Post added at 02:52 PM ---------- Previous post was at 02:46 PM ----------
midy said:
To keep my contacts and my messages, settings... Should I do something precisely or it's saved?
Click to expand...
Click to collapse
Contacts are automatically saved if you saved them on your google account. And for saving messages I recommend SMS Backup + from the market.
zolistir said:
Do you have any other things you would like to change besides your android version? Like the small internal memory for instance? Also what kind of android would you like? Something purest as possible, one with HTC Sense, or MIUI(look at screenshots in development section)?
Click to expand...
Click to collapse
I was really scared the first time I got my phone, I didn't want to crush it with these upgrades, and I waited for official upgrades. But now when I'm sure it will never happen, I want to change it myself.
Firstly, I want to move to a better version of android, because I think that it's the same way we change a Windows XP to a Windows Seven. Correct me if I'm wrong.
Otherwise, I don't know what's the better for my phone. But I just want it to be fast and pretty, with the minimum of bugs possible. And I'm ok to change my HTC Sence. I can have an upgrade version of Sense after (3.0 or 4.0) if there is no big problems and if it's also fast. But now a pure android version or a MIUI is ok.
Is there different procedures for every one of these roms?
I didn't understand what the point in having a small internal memory :s
What I meant by the small internal memory is that, by default you have like 140MB for applications. But this can be increased easily to around 280MB. I would be happy to guide you through the process. Also if you want a more pure android, I would recommend Cyanongemod 7.2(latest release candidate, I can help you with this too). I found this ROM to be very customizable, and rock solid. It's also faster then a Sense ROM. Though you might find that things will look a little different, then they do in Sense.
zolistir said:
What I meant by the small internal memory is that, by default you have like 140MB for applications. But this can be increased easily to around 280MB. I would be happy to guide you through the process. Also if you want a more pure android, I would recommend Cyanongemod 7.2(latest release candidate, I can help you with this too). I found this ROM to be very customizable, and rock solid. It's also faster then a Sense ROM. Though you might find that things will look a little different, then they do in Sense.
Click to expand...
Click to collapse
I would love to increase my internal memory of course!
I will also download the Cyanongemod 7.2. Should I partition my SD card for this rom? By the way my SD Card memory is 2Go :/
midy said:
I would love to increase my internal memory of course!
I will also download the Cyanongemod 7.2. Should I partition my SD card for this rom? By the way my SD Card memory is 2Go :/
Click to expand...
Click to collapse
No not really. I mean yes you could if you really need the extra space, but it will lower performance. I say you should cross one bridge at a time.
Ok then first of all save all your data, then go into recovery and do a backup! This is very important because if something goes wrong, you can get everything back the way it was.
Next go to this site: http://alpharev.nl/ read it carefully before starting with it. If you got any questions then ask. It is very important that before you do something you understand what are you doing and why.
In the meantime dowload the following:
http://get.cm/get/2wt
http://goo.im/gapps/gapps-gb-20110828-signed.zip
http://alpharev.nl/PB99IMG_cm7r2.zip
zolistir said:
No not really. I mean yes you could if you really need the extra space, but it will lower performance. I say you should cross one bridge at a time.
Ok then first of all save all your data, then go into recovery and do a backup! This is very important because if something goes wrong, you can get everything back the way it was.
Next go to this site: http://alpharev.nl/ read it carefully before starting with it. If you got any questions then ask. It is very important that before you do something you understand what are you doing and why.
In the meantime dowload the following:
http://get.cm/get/2wt
http://goo.im/gapps/gapps-gb-20110828-signed.zip
http://alpharev.nl/PB99IMG_cm7r2.zip
Click to expand...
Click to collapse
I'am aware of the dangers. Thanks!
I will save my data and do the backup.
I have downloaded the files you gave me.
What's next?
Well first you make a backup in recovery. After that copy PB99IMG_cm7r2.zip to your the root of your sdcard and rename it to PB99IMG.zip. Copy the other files as well. Then start the phone in hboot mode(power + back). You should see some installation being done.
After this enter to recovery. Select wipe data/factory reset(or the name is very similar. Then go to advanced->wipe dalvik cache(some recoveries have it in a different location). Now your phone should be clean of everything. It's time to install the new ROM.
Select install zip from sdcard, and go to the location you put the zip file to(it's named something like update-...). Wait for it to install, then do the same with the gapps zip.
After your done, you can reboot your phone. The first boot might take longer(in some cases even 15-20 mins, though this never happened to me). And there you go, you should have gingerbread. Let me know how it went.(If there are any problems don't panic, it's most likely fixable)
best for you is that someone else made ​​all ..
rodjo777 said:
best for you is that someone else made ​​all ..
Click to expand...
Click to collapse
Where I can find someone like this...
I'm in Paris region, if you know some one who can do it for me there, I will be glad to meet him
@midy
You're lucky ass...
i'm french, live in Paris...ans use HTC desire ( 2 yrs old)...
i'm currently on ultimate Gingerbread 2.3.7 MIUI ROM namely 2.3.30 with the a2sd+ feature. (MIUI_XJ_A2SD_2.3.30_2.3.7Final_Notsigned.zip )
In addition, i use ManU 2.1 kernel plus a specific partition table from CM7_Hboot_MIUI_Mod.zip
no further development on this rom, but still one of the best.
If you're stuck, PM me !!!
BTW, I speak french too...LOL

Storage issues help

I'm suddenly having storage issues with every ROM that I flash after running a ROM with some script that isn't widely used.
First I'll give you a brief idea of my problem. I"m running out of storage and get notifications from the market saying as much after I download and reasonable amount of apps. The thing is... It show's I have used 738MB of ext4 out of 1.5 so that isn't the issue. The problem is internal memory. My phone won't move dalvik cache for some reason. When I run any ROM with a2sd or m2sd they both say that there is a problem and leave the dalvik cache where it is.
I think my internal folders are jacked up from 40ad2sdx or a zip that was used to clear memory before the ROM. There was a ext4 superwipe cleaner to load before the ROM. I did that without researching first. When I did go looking for the thread about it, it plainly said that it was for one phone only, and it wasn't my phone. I believe it was the Galaxy S3, but I can't be certain. It was a week ago. It was advised not to use it on any other phone because part of what it did was reset the internal folders. Does this mean I can now flash a ROM for the galaxy s3? Lol Just kidding.... Seriously, the second part is all my speculation and I have been wrong many times concerning android. Will somebody help me get my phone back in oem condition please?
Okay, I'm not even sure what you did here, because not knowing the script, anything could have happened.
Try wiping everything and flashing stock rooted here, then go from there with other roms after that.
If that doesn't work. Here's what I would do. It might be a major pain, but it is almost a surefire fix.
Unroot and return to stock, then root again.
[UNROOT]
[ROOT]
For future reference, NEVER flash anything that is meant for another device. (Obviously, if it's a port then you're ok.)
ALSO EXTREMELY IMPORTANT: Backup your SD card, and wipe that puppy clean!! Only partition using Amon-RA recovery, otherwise it will screw you up quite often. I repeat, if you do not have the partition done correctly, then odds are that A2SD or equivalent won't work.
nate234 said:
Okay, I'm not even sure what you did here, because not knowing the script, anything could have happened.
Try wiping everything and flashing stock rooted here, then go from there with other roms after that.
If that doesn't work. Here's what I would do. It might be a major pain, but it is almost a surefire fix.
Unroot and return to stock, then root again.
[UNROOT]
[ROOT]
For future reference, NEVER flash anything that is meant for another device. (Obviously, if it's a port then you're ok.)
ALSO EXTREMELY IMPORTANT: Backup your SD card, and wipe that puppy clean!! Only partition using Amon-RA recovery, otherwise it will screw you up quite often. I repeat, if you do not have the partition done correctly, then odds are that A2SD or equivalent won't work.
Click to expand...
Click to collapse
I did the wipe and flash to stock earlier today, then flashed the Pac man ROM but the issue is still there. I had looked at unrooting my phone earlier today also. I'm glad to read this because it lets me know that I do have some idea of what to do. Thanks for the reply. I'll post here again with the results. Check back soon.
EDIT----> Man, my phone is okay. I loaded up a fairly recent ROM by Tronit, and it worked fine. It was the ROMs. Just to be sure, I went back to the last two ROMs just to see, and they did the same thing again. Now I'm on the AOKP Unnoffical and it's working just fine. The a2sd is working perfectly like it should, and my dalvik cache is moving to ext4. It was just coincidental that the last three ROM's I loaded all have issue with the a2sd. It's funny how nobody else see's problems but me. I looked in the bin file of one of them and it's missing part of the a2sd file. The other two have weird init.d files that I don't know anything about. I'm assuming the a2sd problem is related to that. It's funny how I see lots of problems, and report them, but I get blown off by some people as a noob who is making mistakes. I am a noob, and I do make mistakes, but I know some of my theories about problems are correct...... I gotta get me some respect by compiling my own ROMs.
Status update..... My phone is jacked up for sure. It does work with the AOKP Unofficial by Tronit, but this morning when I cleared my cache with Smelkus Recovery, it had major problems with almost every app. Clearing the cache in recovery is something I've done with every ROM and this has never happened. I uninstalled all the apps and reinstalled them. Got them working again. Everything seemed to be okay. However, when I cleared my cache with Android Tuner, again it ruined every app. I've used android tuner every day for two months to clear the cache and never had problems like this. Something is very wrong.
*****edited and deleted for the sake of peace*****
Long story short, I flashed something made for another phone. I can't explain why I did this without taking up lots of pages, and it doesn't even matter really. Lets just focus on the solution. Here is the link. I flashed both of the zips in the link.
http://forum.xda-developers.com/showthread.php?t=1477955
So I think my permissions for the files on my phone are out of whack. Is that what I"m reading is the possible outcome of flashing these if your phone is not the one listed? Please post your thoughts. I need them.
Try backing up your SD card on a computer and format you SD card and repartion it
Sent from my PC36100 using Tapatalk 2
g2435 said:
Try backing up your SD card on a computer and format you SD card and repartion it
Sent from my PC36100 using Tapatalk 2
Click to expand...
Click to collapse
I did that. Both with Smelkus, and Mini partition wizard. Same problems. I just tried to fix permissions with smelkus 4.3 on the AOKP Unofficial ROM and it took a minute for it to do it's thing. The line of dots was two full rows. So when It loaded back up, I suddenly see the same disk Icon in my notification bar, and now this ROM says it it out of memory. Man, it was working fine. I had twenty more apps on it too and I uninstalled them. It was working fine then, so with twenty less apps, it shouldn't suddenly say "Running out of Storage space."
I have told you this already: Please do not flash things meant for other phones, it could mess up. If it's meant for another device, it might screw yours up. To stay on the safe side: If it's not generic (works for every Android phone) or phone specific (exclusive to the Evo 4G) then don't flash it.
nate234 said:
I have told you this already: Please do not flash things meant for other phones, it could mess up. If it's meant for another device, it might screw yours up. To stay on the safe side: If it's not generic (works for every Android phone) or phone specific (exclusive to the Evo 4G) then don't flash it.
Click to expand...
Click to collapse
I flashed this about a eek ago, when I was looking for the ext4 wipe. I thought it was the same thing as another zip despite what it said. Stupid... I know. I think this may be the cause of my problems, but I can't be sure. I don't know at all really. Just speculations. I reflashed the CWM touch and used to flash a stock ROM. Gonna try that again. I ran the test on CWM touch and it said that the
/sys/class/android_usb/android0 was missing and unable to perform the test. Can this be the cause of my problems?
Don't beat yourself up man, it was an honest mistake, just learn from it and you'll be alright.
Now the optimal recovery for this device would be the Amon-RA recovery, and I recommend redoing what I said in my first post once you have Amon-RA installed. Amon-RA is an awesome recovery, and it's super easy to install. Check out this easy-to-follow video on how to install by clicking here.
Do that, then do what I said in the previous posts. Let me know what happens, because I'm almost certain this should work.
nate234 said:
Don't beat yourself up man, it was an honest mistake, just learn from it and you'll be alright.
Now the optimal recovery for this device would be the Amon-RA recovery, and I recommend redoing what I said in my first post once you have Amon-RA installed. Amon-RA is an awesome recovery, and it's super easy to install. Check out this easy-to-follow video on how to install by clicking here.
Do that, then do what I said in the previous posts. Let me know what happens, because I'm almost certain this should work.
Click to expand...
Click to collapse
I tried loading the Pacman ROM again with CWM and it wouldn't even load. It gets stuck in a bootloop. After that I flashed smelkus and went back to the Stock Rom.
*****edited and deleted for the sake of peace****
RADIO EDIT------
Sent from my PG86100 using xda app-developers app
edited and deleted for the sake of peace
As I stated in my pm give me a day or so till I get back home and I will check into a fix for you. Only don't expect any one on one help. If the fix works cool if not I will dig further. TNN strives to help with any issue no matter who is at fault. I will look at the wipe script you flashed and see if it can be undone. Just be prepared of the possibility that your phone may never work correctly again.
Sent from my PG86100 using xda app-developers app
I was finally able to get my phone straightened out. I loaded up a stock ROM then decided to use my SD Maid to look around. I found a file with completely different dates on it, but it wouldn't let me remove it. I ended up copying everything else in the subfolder and then deleted the parent folder. Then added everything else back. Wah lah.... magic. I don't know what that file was or where it came from but it was killing my internal memory. I'm wondering how it stayed from ROM to ROM. I dunno, but it's gone, and the Pacman ROM is lovely now. BOOM!!!!
jlmancuso said:
As I stated in my pm give me a day or so till I get back home and I will check into a fix for you. Only don't expect any one on one help. If the fix works cool if not I will dig further. TNN strives to help with any issue no matter who is at fault. I will look at the wipe script you flashed and see if it can be undone. Just be prepared of the possibility that your phone may never work correctly again.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Whatever I did only fixed part of the issue. I'm left with in a situation where every time I go into recovery my downloaded apps stop working. It is cutting part of them off whether I clear cache or not. All I have to do is power off into recovery, and when I reboot, all of my downloaded apps begin giving messages that "Unfortuately such ans such has stopped." My phone becomes inoperable. The only way I can keep it working is to send a new launcher to my phone from the market, let it install, then open it up and uninstall all the downloaded apps. I'm pretty sure this is an easy fix for someone like you Mancuso. I have a logcat and it show LOTS of errors that I have never seen before on any of my other logcats. What are my options? Tell me what to do to get my phone back to absolute OEM and then I'll reroot. UNLESS you know of some fix.
I've supplied a logcat from Catlog if you or anybody else wants to have a look. I'd really appreciate some help here. I love my Evo and I love learning this stuff. If somebody can help me positively identify the problem, I can most likely figure it out from there. Please give me your suggestions here. I'm nothing without some guidance on this. It's way out of my scope.
I've included a link to the ext4 script wipe that I used. How I got to this page, I do not know. However, I ran it because this page said it COULD POSSIBLY work on other phones despite the fact that it was made for another phone.
http://www.xda-developers.com/android/darkside-super-wipe-easily-wipe-partitions-when-flashing-roms/
And I flashed both zips from the thread that the story links users to. Here is the link for the two zips.
http://forum.xda-developers.com/showthread.php?t=1477955
I'm not sure this is the problem. I'll try to find the Vold.fstat thread that I tried on my own before you came up with the 40ad2sdx solution for the MIUI ROM.
This is the memory fix I tried as mentioned above.
http://forum.xda-developers.com/showthread.php?t=2246909
Please note that you see before and after pics of sd storage. You can see that my pics clearly resemble the after pics shown in this thread. I believe this is my problem. How can I undo this?
This post reflects the only things I did outside of normal flashing. My problem is here somewhere...
The fix you used is for samsung devices. That could have caused your problems.

Stuck in a very, murky, muddy, Desire HD puddle......

Right. Here we go.
Yesterday, I used HTC devtool and easy ace tool to be rooted and unlocked bootloader. Im still S-On. Ace Pvt Hboot.
Had all sorts of problems. Firstly, with PacMan, which looked and worked fantastic, except no GPS lock, AT ALL, (important to me) soi tried Jellytime and CFX, but all three had issues, and GPS worked on none. I believe this is because the radio is the original one, but dont have the knowledge, skill, or importantly courage to flash an updated radio.
So, tried to flash and EXT4 recovery, with the tool from Google Play. Will not work. Saves to a folder on SD but still boots in CWM recovery So I cant use EXT roms properly. I tried to go back to PacMan, but I cant even do that. I wipe and format, and reflash the boot image, but every time it wont load correctly - something ddoesnt work, and I get errors. Latest was Android Keyboard is not working, so I cant do anything!
Attempted to put ViperDHD rom on to go back to something like stock (GPS worked great on stock!!) and worked ok, with some funny issues on initial boot but settled down. But, STILL no GPS.
Decided stuff it, go back to stock . Downloaded stock RUU and attempted to install, but, of course, it wont work.
So, in short, I have a fantastic Desire HD, that wont flash EXT4, wont go back to stock on RUU, and I cannot find a ROM that will work with GPS. On some, wireless doesnt work either.......
So, if someone could help me to either make my GPS work on ICS or Jellybean, or, help me go back to where I was, (GPS working!!) before I started all this, I'd be eternally grateful. I dont have money to spend on a new phone, so I'll even put some money in your development coffers as a thankyou for helping me out. I just need me smartphone to be smart again, not the useless pile of Sh*te it is right now
My previous post about lack of GPS proved fruitless, no replies. BUt I am hoping that one of you Desire HD gurus will rise to the challenge that I face right now and help. I cant but you a beer, I cant do much at all, but of you help me fix my problem I will, I promise, be eternally grateful. I'll even send your missus flowers by Interflora if that helps!!!:silly: Seriously, I really need someone who knows there stuff to give me a hand out of a hole.
My thanks in advance.
Phil
Hey there. Seems like you've gotten yourself into quite a little mess there.
First of all, I'd recommend you flash BlackICE. Its a Gingerbread based ROM but I know for 250% fact that it is rock solid and the GPS works.
After that, I believe you're going to have to manually flash the recovery using fast boot (hit up the link for the Ace Think Tank in my signature for guides and any additional help you might need)
Finally, another bulletproof ROM I recommend is IceColdSandwich. I personally know that this ROM is 100% stable and that the GPS works.
If you need any additional assistance, feel free to post in the Ace Think Tank. And as always, be sure to drop a thanks if I helped or anyone else helps!
Edit: ViperDHD isn't based on stock my friend. Its based on the One V stock ROM as far as I know, so its been ported from that. An amazing stock based ROM is Android Revolution HD, which I've tested personally and found to be bloody amazing!
Also, the RUU won't flash as you'll have to relock your boot loader. Use fast boot to to that if you still want to return to stock
Edit 2: also. Please refrain from creating multiple threads. I know its tempting but the desire HD is slipping into the legacy stage, where I treat and development is slowing down. If you must get an answer quick, either 'bump' your thread (simply post the word 'bump' and it'll push it to the top of the list, so it'll show as unread. Be aware that you can only do this once every 24 hours) or post in the Ace Think Tank.
Thanks
- Sent from Guy's Super Duper S3
GuyInTheCorner said:
Hey there. Seems like you've gotten yourself into quite a little mess there.
First of all, I'd recommend you flash BlackICE. Its a Gingerbread based ROM but I know for 250% fact that it is rock solid and the GPS works.
After that, I believe you're going to have to manually flash the recovery using fast boot (hit up the link for the Ace Think Tank in my signature for guides and any additional help you might need)
Finally, another bulletproof ROM I recommend is IceColdSandwich. I personally know that this ROM is 100% stable and that the GPS works.
If you need any additional assistance, feel free to post in the Ace Think Tank. And as always, be sure to drop a thanks if I helped or anyone else helps!
- Sent from Guy's Super Duper S3
Click to expand...
Click to collapse
Thanks for coming back to me mate, it is greatly appreciated.
Ok, deep breath, and after my above and considering your reply, I ihave flashed an EXT4 recovery from Fastboot, but, this will not load. Goes to HTC screen and stops. Im sure I can put it right with EasyAce which I will try now.
I will try then to put Black ice on as you advised and post back.
really appreciate your advice!
addictR3 said:
Thanks for coming back to me mate, it is greatly appreciated.
Ok, deep breath, and after my above and considering your reply, I ihave flashed an EXT4 recovery from Fastboot, but, this will not load. Goes to HTC screen and stops. Im sure I can put it right with EasyAce which I will try now.
I will try then to put Black ice on as you advised and post back.
really appreciate your advice!
Click to expand...
Click to collapse
Seems I cant boot into a recovery at all now. Tried to reflash with EasyAce tool but getting errors. I dont have a working recovery, so cant flash a rom
Ok, somehow, via the red wine and stress induced fog, I managed to get EXT recovery working. Im now tryig to get a rom working. Tried PacMan again, bit straight off I get AOKP keyboard not working error and I didnt have to go through the Google setup - why cant I get a clean boot - this confuses me?? I wipe Cache, Dalvik. Factory reset - same problem. I have even tried formatting system from Advanced - same????
At least I can flash RIMs now!!
Thanks again for your help
You are still s-on yes?
Have you flashed boot.IMG?
If you are s-on you must flash the boot.IMG (contained inside the ROM's zip file) using a PC and "fastboot flash boot boot.img" every time you change to a new, different ROM.
Sent from my GT-I9505 using xda app-developers app
I have indeed mate, one thing I learned early on.
I have managed to get JellyTime on ok, but, again, no gps and also the potentiometer for the compass etc appears to not work!! Arrrrrgh!!!!
I think the issue must be the radio. Can I flash a new radio if im S-On and bootloader unlocked? Im ok with fastboot stuff if I need that to push a radio, but, I read that flashing a radio is inherently more "dangerous" than flashing the recovery etc.
I hoped the EXT4 recovery would make a difference, but seems not to have at all. FWIW, I also did the GPS antenna mod yesterday, and it hasnt helped either. My gps appears to work, but its very poor. I left it outside for 10 mins last night looking up at clear sky and it didnt show one satellite.
Think it might be time to sell the phone
You need to be S-Off to flash a radio.
I still cant get my head around why I cant get PacMan back on ok? It worked a treat first time, except for gps. Now, it will not install properly at all. It boots ok, but straight away I get keyboard has stopped working, and it doesnt go through the account setup etc.
But the potentiometer works!!!!!
Where I am at now.
Put CWM recovery back on, and tried Cyanogen 7.1. Would not boot. Several attempts at wipe and reflash did not cure this. So I am now running Android Revolution HD7.3. I thought as it was close to a stock ROM it may work, but, still no joy.
I put other halfs Desire HD next to mine and started the GPS on them both. Hers locked in less than a minute. Half an hour later, I had seen one brief flicker of two satellites on mine, Still no fix.
So, I dont know what to do really. I ish I could put the phone back to how it was, but doesnt look like that is going to be an option. Tried the RUU, but it doesnt work
I still cannot understand why none of these roms will work with the GPS when it was perfect before on stock 2.3.5??
What's wrong with the RUU? I would try flashing a fresh recovery image from fastboot, then wiping everything under the sun and flashing ARHD again.

Categories

Resources