I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE BY FLASHING THIS KERNEL
From version 3.0 i'll provide kernel both for stock based rom & Cyanogenmod based rom
This kernel is still on heavy development & maybe can make instabillity on your system.
Do with your own risk!!
Feature:
Overclockable to 1Ghz, but stable in 883Mhz for me
Added 672Mhz clock speed.
Support Ext 3 and Ext 4
Swap support
Cifs & Tun Module (u can found it on /system/lib/modules)
added scaling governor for battery life (interactifve, smartass, smartassV2, savagedzen, scary, minmax, interactiveX, lagfree, lulzactive)
added 4 i/o schedulling for better i/o (cfq,bfq,vr,sio)
prerooted (after install this kernel, your rom automatically rooted)
Unsecure Mode (adb shell aways as root)
better memmory management
init.d support
custom bootanimation
preinstalled busybox 1.19.3-cm7 bionic
BLN (Backlight notification) support *
more tweak on kernel
known bug:
-
what kernel should i choose??
its depand on your rom.
if you use rom based on stock rom (modified/unmodified) [ex: stockrom from samsung, giopro, particle rom] you can try this kernel for stockrom.
if you use rom based on cyanogenmod7, u should use kernel for cyanogenmod7.
here's some screenshoot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
do backup first before try this kernel update
this kernel update is include no-frills application. it's used for change maximum & minimum cpu speed, governor, and i/o schedule
if get error when set maximum & minimum cpu clock, please use setcpu to set it
Download link:
you can download it from My Mirror or Goo-inside.me
Special thx to:
Hyriand for his kernel source at github
Indonesian Gio Community for help me to fix bug
if u have problem with this kernel or found a bug, please report to me
Do With Your Own RIsk
Changelog & Download Link
Changelog
Version 3.0 Release
Based on newest experimental kernel for my cm7
Add more tweak & better stability
kernel & ramdisk compressed using xz
small size than other kernel
using 800Mhz as default, instead 787Mhz
BLN should 100% working without any patch
Fix issue with usb tether (on stockrom)
More, u can see on my github
Version 2.1 Release
alot feature added
based on my cm7 latest kernel, with some modification to work on stock rom
based on perf-CL783107
fix compatibility, now this kernel should work on most stock rom
added BLN support
added init.d support
prerooted
added custom bootanimation support
many more
Version 2.0
this version is not pusblished
Version 1.3 Release
Add support to mount ext4 partition on internal memory (system, data & cache)
Version 1.2 Release
Fix charge when phone turn off
Fix bootanimation issue, now u can use bootanimation
Added 2 new scaling governor (smartass, interactive)
Version 1.1 relase to public
Overclockable to 1Ghz, but stable in 883Mhz for me
Support Ext 3 and Ext 4
Swap support
Cifs & Tun support
added 5 new scaling governor for battery life (smartassV2, savagedzen, scary, minmax, interactiveX)
added 4 i/o schedulling for better i/o (cfq,bfq,vr,sio)
What's scaling governor & i/o schedulers?
If u want know about governor & i/o schedulers
go to this thread:
Code:
http://forum.xda-developers.com/showthread.php?t=1242323
*reserverd*
Will this work with S5660M?
lypang said:
Will this work with S5660M?
Click to expand...
Click to collapse
wow, i dont know about that
maybe u can try it, but do nandroid backup first before apply this kernel
phiexz said:
I've compiiling kernel with 2.6.35.7-Perf-CL561540
Click to expand...
Click to collapse
May I distribute it with my custom ROM?
ZimniY said:
May I distribute it with my custom ROM?
Click to expand...
Click to collapse
yes u can
but, u should check 1st. is it work on ur rom or not
phiexz said:
but, u should check 1st. is it work on ur rom or not
Click to expand...
Click to collapse
R u trolling me?! sure I check it BEFORE I put it into my ROM)) I'm not a kamikaze
now we have enough reason to ask for our own sub forum right?
great work bro, downloading first testing while i've free time
I've rebuild initrd for my needs... Will test now...
ZimniY said:
R u trolling me?! sure I check it BEFORE I put it into my ROM)) I'm not a kamikaze
Click to expand...
Click to collapse
hahahaha.. justkiddd bro
klebengan said:
now we have enough reason to ask for our own sub forum right?
Click to expand...
Click to collapse
yup, can u ask admin or moderator for our sub forum??
oh, i just received report that wifi is not working.
please report, is it working or not.
i've test this kernel with particle beta 2 & simpligio 1.3
wifi module work. but i'm not check is it can connect to wifi or not.
phiexz said:
hahahaha.. justkiddd bro
yup, can u ask admin or moderator for our sub forum??
oh, i just received report that wifi is not working.
please report, is it working or not.
i've test this kernel with particle beta 2 & simpligio 1.3
wifi module work. but i'm not check is it can connect to wifi or not.
Click to expand...
Click to collapse
for gio sub forum maybe we should ask waqas to do that. cos he's ts for the first gio thread
btw wifi work great with me
klebengan said:
for gio sub forum maybe we should ask waqas to do that. cos he's ts for the first gio thread
btw wifi work great with me
Click to expand...
Click to collapse
can u pm him to ask the admin?
some one report his wifi cant connect. stuck in obtaining address
recently i also test wifi. i created adhoc from linux + dhcpd module
then i try to connect my gio to this adhoc with dynamic ip
its work on me, only take about 2 seconds and connected. i also try to ping & browsing, it's worked
i think the problem isn't from this module wifi, maybe his access point
Wifi works for me)
But gio reboots sometimes... I apologise - I've set up too hight frequency...
ZimniY said:
Wifi works for me)
But gio reboots sometimes... I apologise - I've set up too hight frequency...
Click to expand...
Click to collapse
hahahaha stable in 883Mhz for me
but i usually use 122 to 806Mhz
i only use high frequency if need, like play hd game, and benchmark too
Gooddddd Jooobbb 2 Thumbs up
phiexz said:
can u pm him to ask the admin?
some one report his wifi cant connect. stuck in obtaining address
recently i also test wifi. i created adhoc from linux + dhcpd module
then i try to connect my gio to this adhoc with dynamic ip
its work on me, only take about 2 seconds and connected. i also try to ping & browsing, it's worked
i think the problem isn't from this module wifi, maybe his access point
Click to expand...
Click to collapse
i'll pm him this night
squadzone said:
Gooddddd Jooobbb 2 Thumbs up
Click to expand...
Click to collapse
: sungkem
klebengan said:
i'll pm him this night
: sungkem
Click to expand...
Click to collapse
maybe the way is posting request thread here and we need to tell all gio thread in there
Related
I've compiled cm-kernel 2.6.35.7-Perf-CL783107
Feature:
Overclockable to 1Ghz, but stable in 883Mhz for me
Support Ext 4 sdcard format
s2e compatible
Swap support
Cifs & Tun support
added scaling governor (interactifve, smoothass, smartass, smartassV1, smartassV2, savagedzen, scary, minmax, interactiveX, superbad, DARKSIDE, lazy, virtuous, msm7k, smoothass, lagfree, brazilianwax, ondemandX, greaselightning, and one of BNC )
added 4 i/o schedulling for better i/o (cfq,bfq,vr,sio)
Add BLN support
Bash Installed
Custom bootanimation
Added cf-root kernel
For CM7.2, u can use cm-7.2-kernel
known bug:
Screen on animation doesn't work
Here some ss for CM 7.1 (Tested by me) :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here for 7.2 (Tested by me & laba2batu, Jibs) :
*Do nanbackup first before try this kernel update.
This kernel update is include no-frills application. it's used for change maximum & minimum cpu speed, governor, and i/o scheduler.
If get an error while u were setting maximum & minimum cpu clock, please set it to a normal freq (787MHz).
If u feel freak to No-frills CPU, just do delete it!
And, use from CyanogenMod settings
Download link [Updated] :
Code:
[LIST]
[*][B][COLOR=red] CyanogenMod 7-dell 2.6.35.7-perf-CL561540[/COLOR] [COLOR=blue](v1.1)[/COLOR] ---> [/B][B][URL="http://*******/49kuF"][COLOR=#0066cc]here[/COLOR][/URL][/B]
[*][B][COLOR=red]CyanogenMod 7-dell 2.6.35.7-perf-CL561540[/COLOR] [COLOR=blue](v1.1)[/COLOR] another file (1) --->[/B][B][COLOR=red] [URL="http://*******/4EVRN"][COLOR=black]here[/COLOR][/URL][/COLOR][/B]
[*][B][COLOR=red]CyanogenMod 7-dell 2.6.35.7-perf-CL561540[/COLOR] [COLOR=blue](v1.1)[/COLOR] another file (2) --->[/B][B][COLOR=red] [URL="http://*******/4CbSc"][COLOR=#0066cc]here[/COLOR][/URL][/COLOR][/B]
[*][B][COLOR=red]CyanogenMod 7-dell 2.6.35.7-perf-CL561540[/COLOR] [COLOR=blue](v1.1)[/COLOR] another file (3) ---> [URL="http://*******/4Cbip"][COLOR=#0066cc]here[/COLOR][/URL][/B]
[*][B][COLOR=red]CyanogenMod 7-dell 2.6.35.7-perf-CL561540[/COLOR] [COLOR=blue](v1.1) [COLOR=black]another file (4)[/COLOR] [COLOR=black]--->[/COLOR][/COLOR][/B] [URL="http://*******/4BLGG"][COLOR=#0066cc]here[/COLOR][/URL]
[/LIST]
[LIST]
[*][B][COLOR=#ff0000]CyanogenMod 7-dell 2.6.35.7-perf-CL783107[/COLOR] [COLOR=blue]For CM7.2 --->[URL="http://www.mediafire.com/?kknqjqbo7okrotw"] here[/URL][/COLOR][/B]
[*][B][COLOR=#ffa500]md5sum:[/COLOR][/B]
[*][COLOR=Red]e56eb758f8858c8bc5f0be945da23410[/COLOR]
[/LIST]
[LIST]
[*][COLOR=DarkRed]or this one (For CM7.2 RC5.x :D) [/COLOR]--> [URL="http://www.mediafire.com/?66bt3rd46666k9b"]here [B][COLOR=orange][new][/COLOR][/B][/URL]
[*][COLOR=Orange]md5sum:[/COLOR]
[*][COLOR=Red]959104fc744108c7deb22803e4a6a5b8[/COLOR]
[/LIST]
[LIST]
[*][COLOR=Red][COLOR=DarkRed]If u have problem about s2e on this version, Flash [URL="http://www.mediafire.com/?m9oad1txrekcdlz"]this file
[/URL][/COLOR][/COLOR]
[/LIST]
Choose Kernel that u think it's useful and totally work for daily use or working activity
Steps to install :
Go to recovery mode (press Home+Power on/off button while your phone's off)
Go to mount and storage (CWM) | Go to mount menu (RZR)
Mount system, go back (CWM & RZR)
Choose Install zip from sdcard (CWM) | Choose install menu (RZR)
And choose file u've downloaded (CWM & RZR) | Then, install DelanoKernelxxx.zip (RZR)
Reboot system (CWM) | Reboot android (RZR)
Enjoy!
Special thx to:
Phiexz & Squadzone for their kernel source code @github
Adam Roland for bootanimation
All BNC & All devs & All
if u have problem with this kernel or find a bug, please report me!
Do With Your Own RIsk!
If u like this, hit thanks button,please!
-reserved-
I'll test it on CM7.2 RC1.1, I want BLN on Gio
is it really have bln support?
i think we also must edit liblight for bln
and, have you try to use software like bln control fro neldar?
and test it, is this kernel have support bln or not
phiexz said:
is it really have bln support?
i think we also must edit liblight for bln
and, have you try to use software like bln control fro neldar?
and test it, is this kernel have support bln or not
Click to expand...
Click to collapse
Weh ada mastahnya hihi.
:malus
Delete dulu contentnya
Cause on my phone just be like that. So, I can say bln support.
But, I wanna test it anymore.
is it software for PC?
or we can test on our phone?
I can't turn BLN on....
Macław said:
I'll test it on CM7.2 RC1.1, I want BLN on Gio
Click to expand...
Click to collapse
ok, sure u can test it
Macław said:
I can't turn BLN on....
Click to expand...
Click to collapse
How did u test it?
Maybe I did mistake broer.
By BLN Control Pro from Market, it tells me: BLN is not installed.
Macław said:
By BLN Control Pro from Market, it tells me: BLN is not installed.
Click to expand...
Click to collapse
OK, sry. I'm false.
Sry I think there's still BLN issues.
On CM7.2 GPS and sensors starting work, but Market have FC.
Macław said:
On CM7.2 GPS and sensors starting work, but Market have FC.
Click to expand...
Click to collapse
Market FC, u can downgrade it, maybe.
Like what u do while you're on CM 7.1 which has issues like that.
Have u tried it?
No, from yesterday I'm on CM7.2...
---------- Post added at 11:21 AM ---------- Previous post was at 10:29 AM ----------
Dude, try to fix Market, this kernel is great right now for CM7.2, but only Market is problem!
for market FC
trying to change chmod /cache on init.rc at ramdisk
you should change it to 777
Macław said:
No, from yesterday I'm on CM7.2...
---------- Post added at 11:21 AM ---------- Previous post was at 10:29 AM ----------
Dude, try to fix Market, this kernel is great right now for CM7.2, but only Market is problem!
Click to expand...
Click to collapse
Please try this! hehe
I'll do it now.
----
Oooh, now all is works. Can I use it on RC2 of CM7.2?
Macław said:
I'll do it now.
----
Oooh, now all is works. Can I use it on RC2 of CM7.2?
Click to expand...
Click to collapse
Thx for trying!
RC2 of 7.2?
Has it been released?
I think it's still RC-0
phiexz said:
for market FC
trying to change chmod /cache on init.rc at ramdisk
you should change it to 777
Click to expand...
Click to collapse
I did, masbro!
Delanoister said:
Thx for trying!
RC2 of 7.2?
Has it been released?
I think it's still RC-0
Click to expand...
Click to collapse
1.0 and 1.1 update were released today. (see 7.2 topic).
Kernel Version V3 Released : Link
Kernel For Optimus Me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have compiled a kernel for Optimus Me p350 from a combination of Drapalyuk and pax0r kernel.Please Try this kernel and check the problems (bugs) I have replaced the wifi drivers with original one form drapalyuk
Fixes :
wifi (I guess)
How To:
download the zip file
copy it to sdcard
reboot to recovery
select flash menu
choose the zip card from sdcard
flash it
Click the thanks button
enjoy
Download V1 : kernel-p350-vivek
Changelog
V3:
more CPU governors
minmax
scary
savagZen
interactiveX
Smartass
V2 :
wifi fix
new Toolchain
compiled form pax0r kernel
Optimus Me p350 Kernel V3
This kernel can be applied on CM7.1 ,CM7.2 and MIUI , and other ROMs based on Cyanogen
Note : We can set the CPU Governors in Menu > Settings > CyanoGenMod settings > Performance > CPU Settings > Available governors OR you have to download no-Frill (Free) from market to change the CPU Governors
CPU Governors
minmax
scary
savagZen
interactiveX
Smartass
Download : vivek-kernel-v3
but I did not changed anything in WiFI code so I dont see how this could be something diffrent
And what improvements specifically do we get by flashing your kernel?
How I install this Kernel?
Have bugs?
Sorry my bad english!
I installed as a rom using the recovery mode option with "zip install from sd card" option.
pax0r said:
but I did not changed anything in WiFI code so I dont see how this could be something diffrent
Click to expand...
Click to collapse
Users reported wifi to be working after applying this kernel
Sirrocco said:
And what improvements specifically do we get by flashing your kernel?
Click to expand...
Click to collapse
fixed the wifi problem (users are still testing wifi)
assef said:
How I install this Kernel?
Have bugs?
Sorry my bad english!
Click to expand...
Click to collapse
Apply it via recovery as you apply ROMs like CM7
What are the changes or fix or anything New in this kernel as i am using your Theme from Here so are the both same or is this the new one
loveboy_lion said:
What are the changes or fix or anything New in this kernel as i am using your Theme from Here so are the both same or is this the new one
Click to expand...
Click to collapse
This is kernel only
you can apply this over the CM7.2 or CM7.1. The CM7.2 comes with paxor kernel you can apply this to get more wifi/3G ie wifi breaks in pax0r kernel .That problem is fixed in this kernel
pax0r said:
but I did not changed anything in WiFI code so I dont see how this could be something diffrent
Click to expand...
Click to collapse
vivekkalady said:
Users reported wifi to be working after applying this kernel
fixed the wifi problem (users are still testing wifi)
Apply it via recovery as you apply ROMs like CM7
Click to expand...
Click to collapse
Guys, why dont you work together on this? isnt that the Linux filosofy ?
Now we are getting a lot of kernels and users probably don't know what to install anymore.... just my 2 cents !
Both thank you for the good work!!
Cheers, Gerard
The data connection goes after sometime and i'm told no connection. A reboot fixes this though.
kirit1193 said:
The data connection goes after sometime and i'm told no connection. A reboot fixes this though.
Click to expand...
Click to collapse
my 3g its work with this kernel...
Theme
vivekkalady said:
Optimus Me p350 Kernel V3
This kernel can be applied on CM7.1 ,CM7.2 and MIUI , and other ROMs based on Cyanogen
CPU Governors
minmax
scary
savagZen
interactiveX
Smartass
Download : vivek-kernel-v3
Click to expand...
Click to collapse
What theme you have or what Custom rom?
xcoandroid said:
What theme you have or what Custom rom?
Click to expand...
Click to collapse
CM 7 with ics theme
Sent from my GT-I9003 using xda premium
this kernel can be support on rom cosmic experia ???
cooler1182 said:
this kernel can be support on rom cosmic experia ???
Click to expand...
Click to collapse
Yes
Because it is also based on CM
Sent from my GT-I9003 using xda premium
minmax
scary
savagZen
interactiveX
Smartass
Whats the use/advantage of each governer?
Which governor is the best??
Phonerix said:
Which governor is the best??
Click to expand...
Click to collapse
That depend on your use
Minmax is good for games,others for battery backup,performance,stability etc
Notice: Sorry guys but at the moment i'm very busy with real life and Xda moderation so i'm unable to continue this project, for now though.
Welcome to the HyperDroid Androidmeda RedPill Kernel (GT-P1000 Galaxy Tab Edition)
Hello all, me and D.O.C started this collaboration for the Galaxy Tab, he is on the roms (awesome work) and me on kernel, while thanking him all the other thanks goes to the Hyperdroid team, mostly know for works on HD2 and Galaxy s2.
Credits
-Thanks the the whole Hyperdroid team for making this possible
-Thanks to Koxudaxi for every patch to the kernel Tab.
-Thanks to Disgustipated for sharing his source and tweaked governors
-Thanks to the OverCome Team for sharing their wonderful experience, specially alterbridge89 for his great support and source sharing, you guys are an example of what true developers should be.
-Thanks to D.O.C for his rom and for pushing me to this.
-Thanks to Arif-Ali for his precious help, i'll never forget this.
-Thanks to to Supercurio for Voodoo stuffs
-Thanks to Technomancer for his CM7 work and source
-Thanks to Petsasj for his GitHub help
-Thanks to Ronis_BR for his patches
-Thanks to CyanogenMod team, Stratosk, Koush, Pongster (Hyperdroid team leader), Google.
-Thank you from the Samsung Galaxy Tab @XDA Community we are forever grateful!
-Thanks to Tab Cm9 Team : angel_666, cdesai, humberos, jt1134, koxudaxi, red_bell, sbrady, techomancer.
- Thanks to DoomLord and Napstar from team UtterChaos for some help with recovery and for been so kind people.
I may have forgot someone, send me a pm if i did and i will add you here.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel features:
- New pimped Recovery (thanks to Alterbridge for source):
possibility to chose location for nandroid backup and restore.
New color layout and Hyperdroid RedPill personalization.
Click to expand...
Click to collapse
-Overclock possibility till 1.4 ghz
-Undervolted
-BFQ-v2 scheduler
-Governors: Smartass2, Lagfree, Smoothass, Ondemandx, InteractiveX, Interactive and the others Android default.
-Ondemand, BFQ-v2 and 1.0 ghz set by default.
-Voodoo sound V10
-Voodoo lagfix
-10 points multitouch
-Fast USB charge updated for USB 3.0 users
-Sio, Vr and deadline schedulers
-SFB Stochastic Fair Blue
-Tiny_Shmem (thanks to Ronis_BR)
-Ram and LCD STOCK Voltage ( i don't like to undervolt them, this is a choice of mine)
-and other......
Click to expand...
Click to collapse
Note: I don't care a frack about Quadrant or Antutu scores so if you will come here to complaint about them, well, you'd better think twice lol.
Click to expand...
Click to collapse
MatrixPills Image Used with permission from Corinne Wilger... You can find her site HERE.
Warning: I will not responsible if by flashing this kernel you will hurt your Tab.
DOWNLOADS:
RP_V2.0.1 CWM Flashable
RP_V2.0.0 CWM Flashable
RP_V2.0.0 TAR Odin flashable
HDRP_V1.0.0 CWM Flashable
HDRP_V1.0.0 TAR Odin flashable
Source code
Installation:
If you come from an Overcome kernel, download the CWM flashable zip, copy it to your sdcard root, reboot into recovery and flash it.
After reboot check from recovery if lagfix system is enabled.
Click to expand...
Click to collapse
If you come from a stock rom, download the TAR Odin flashable, reboot your Tab into download mode, connect it to your pc and flash the tar with Odin.
After reboot wait till it will convert your partitions to EXT4.
Click to expand...
Click to collapse
ChangeLog:
V1.0.0 : Initial release
Click to expand...
Click to collapse
V1.0.1 BETA:
+ a lot of governors:
brazilianwax
scary
smoothass
Savagedzen
minmax
lazy
lulzactive
lionheart
+Lulzactive+Vr set as default
+file sync disable patch
+Kernel with LZO compression
- Kernel with LZMA compression
+Script to init.d for Lulzactive battery save
Check here for more informations about governors, schedulers and tweacks.
Download Lulzactive app from market and tweack it.
Thanks to Tegrak for lulzactive governor.
Click to expand...
Click to collapse
V2.0.0:
Fixed USB charge.
Fixed some UV lines.
Add Ntfs support and Battery life extender
Add some new governors
Add touch recovery
Some other minor fix and changes.
Add USB host.
Removed file sync disable patch.
Removed LionHeart governor
Removed Lulzactive script.
This thanks to Cm9 Tab team because i merged many patches from their repo and Dizgustipated for the work on governors
Click to expand...
Click to collapse
V2.0.1:
removed USB OTG since we have video capture problems.
removed some Governors.
Back to LZMA kernel compression.
Click to expand...
Click to collapse
Car'nt wait
Congratulations, you guys will be amazed by the kernel....so far, great!
Isto this kernel compatible with your previous 2.3.6. ROM?
Thanks
Sent from my GT-P1000 using xda premium
Af974,Thank you first,and How to enable the USB charge Please?
Yes it is compatible with 2.3.6, modules inside initramfs are from JQ8
nscosta said:
Isto this kernel compatible with your previous 2.3.6. ROM?
Thanks
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
It ia autoactivated, you don't need to do nothing, perhaps, do not expect that your tab will charge as with wall charger, it needs 2ah and usb only give us 500ma (usb 2.0) and 900mah (usb 3.0)
wayijie said:
Af974,Thank you first,and How to enable the USB charge Please?
Click to expand...
Click to collapse
First thanks for your work.
A doubt, this kernel also active lagflix (EXT4)?
regards
Yes, it is also wrote in kernel features
Anyway, reboot into recovery and check if system lagfix is enabled otherwise enable it
rebelde_ said:
First thanks for your work.
A doubt, this kernel also active lagflix (EXT4)?
regards
Click to expand...
Click to collapse
Yes, I have found that it activated.
Thank you for your speed
Is it exactly the same version as in other hyperdroid thread 1.4.8?
Yes the same.
redikx said:
Is it exactly the same version as in other hyperdroid thread 1.4.8?
Click to expand...
Click to collapse
Congratulations Hope you'll reach the millions of views and downloads like the rest of the HyperDroid family...
I went through the hole ugrade from Froyo to Ginger today and discovered this great kernel! Great job Thank you af974 for your hard work and this kernel!
Thanks again for the quality work... great kernel.
How can I set Governor, Scheduler and OC, is a special app recommended?
... tapatalked
Voltage Control is the one that i use
Fenvarien said:
How can I set Governor, Scheduler and OC, is a special app recommended?
... tapatalked
Click to expand...
Click to collapse
af974 said:
Voltage Control is the one that i use
Click to expand...
Click to collapse
Thx, I will try it. Tegrak Ultimate didn't work by the way...
/edit: VC works perfectly!
... using tapatalk
hello af974
Maybe it's crazy how I'm going to ask.
Recently released a driver for the Galaxy S "USB host" to work with pendrive, ect ..
The question is: Do you think this driver can carry in the future to your kernel?
Thank you very much for your great and precious work
regards
Sorry for my spanglish
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ladies and Gentlemen, welcome to my latest kernel ELiTE edition!
Get ready for the most battery life, the best performance and the most fps in-game!
The goal of this kernel is to be atleast as stable as Sony's stock kernel, while delivering a better performance and battery life.
This is mainly accomplished due to Swap, CleanCache, ZCache, ZRam, which help to reduce the I/O load and give you more free memory for multitasking. The battery consumption should not be worse compared to Sony's stock kernel, while I am achieving more performance due to making full usage of the Qualcomm Resource Power Manager (RPM).
To save additional battery, I recommend switching to either the 'intellidemand' or 'badass' governor for the best battery life.
To get the most performance out of this, I'd recommend to switch to the 'lagfree' governor.
Click to expand...
Click to collapse
FEATURES
CPU OVERCLOCKING UP TO 1.7 GHZ
MORE GOVERNORS
MORE SCHEDULERS
MORE TWEAKS
MORE BATTERY LIFE
SWAP
ZRAM
ZCACHE
CLEANCACHE
VOLTAGE CONTROL
CWM RECOVERY
GOVERNORS
OnDemand
Userspace
Powersave
Conservative
Performance
Lagfree
Lazy
Intellidemand
Badass
SCHEDULERS
No-op
Deadline
CFQ
SIO
VR
CREDITS
Dennis Rassmann (showp1984)
Paul Reioux (faux123)
Yoann Laissus (arakmar)
INFO
If requested, a CyanogenMod version will be done.
I am working on including the TWRP recovery (Team Win Recovery Project).
I seriously don't feel a need to overclock the GPU (Adreno 220), but if requested, I will look into it.
If the hardware doesn't make it impossible, there's hardly anything I can't do. Just be brave and give me constructive feedback!
SOURCE
A full source code, with actually understandable commits can be found HERE
Downloads +++ Changelog
DOWNLOADS AT GOO.IMhttp://goo.im/devs/RaymanFX/downloads/ELiTE/Xperia_S
CHANGELOG
V2
Code:
*Compatible with Sony Stock Roms and MIUI
*WiFi BCM4330 fixed
*Adreno220 2D/3D overclocked
*CPU/GPU bandwith increases
*Additional CPU freq @ 1.7 GHZ
*increased voltages
V1
Code:
*Initial Release
*Based on Sony's .55 source release
*Compatible with Sony Stock Roms and MIUI
*Awaiting user's feedback
*^if requested, a CM version can be done
Yeeeeees!!! a new kernel finally for ICS!!!! will try It of course.
Thank youuu
woot !!
new kernel !!
testing it now !!
thanks.
will give this a try..and give feedback.... nice....
and yes..a cm10 kernel would be great...
Regards
Great news, a new kernel, thanks! I've already flashed it on XTXperience v7 and booted with no problems - cleaned cache & dalvik cache before flash. So far seems snappier, governor is intellidemand and antutu score is 8740. Will post feedback when I use it for a couple of days. I was on Stock+ kernel.
Sent from my LT26i using Tapatalk 2
Just to make it clear,
is this just for the unlocked bootloader or is it also possible to flash while on locked bootloader?
thanks!
omasis said:
Just to make it clear,
is this just for the unlocked bootloader or is it also possible to flash while on locked bootloader?
thanks!
Click to expand...
Click to collapse
You can't flash kernels with locked bootloader.
Felimenta97 said:
You can't flash kernels with locked bootloader.
Click to expand...
Click to collapse
kk thank you!
WiFi not turning on. I am using XTX7 UB.
Besides that, kernel works great. I don't have any other issues so far.
fchaudhri01 said:
WiFi not turning on. I am using XTX7 UB.
Besides that, kernel works great. I don't have any other issues so far.
Click to expand...
Click to collapse
same here
another thing is that i can't find is where to change governor
everything else is fine
moe18 said:
same here
another thing is that i can't find is where to change governor
everything else is fine
Click to expand...
Click to collapse
Use app like setcpu. It allows you to change governor and scheduler.
AnTuTu CPU Master free also allows you to change governor. It says "Scaling" instead of governor and scheduler comes under Advanced settings tab.
Hope that helps.
For those who have wifi problem, try flashing stock wifi module.
Flash this: https://www.box.com/shared/0wjj7myr79u5ezipm0yc
Thanks me if i helped!xD
Send from my stupid lt26i
I'm on xtx7.
just flashed the kernel. no wifi problem here.
monivan said:
For those who have wifi problem, try flashing stock wifi module.
Flash this: https://www.box.com/shared/0wjj7myr79u5ezipm0yc
Thanks me if i helped!xD
Send from my stupid lt26i
Click to expand...
Click to collapse
That fixed it for me. Wonder why it happened for me and not for the person above me? Anyways, all is well now.
Thanks for the kernel...
And yes a cm10 version will also be great with TWRP recovery in both kernels...
Sent from my Xperia S using xda premium
Need Help
I flashed the Kernel. After reboot a encounted the same wifi problem. But solved it with flashing the Wifi module.zip. Thanks to the Uploader.
I set the maximum cpu speed and lagfree governer. And What about " SCHEDULERS". ? What is the use of that ? Which one should i set ? I am using Setcpu... Pls reply.. Thanks in advance
Wow great kernel I will feedback soon, YES a CM9.1 kernel Please????
Sent from my LT26i using xda premium
monivan said:
For those who have wifi problem, try flashing stock wifi module.
Flash this: https://www.box.com/shared/0wjj7myr79u5ezipm0yc
Thanks me if i helped!xD
Send from my stupid lt26i
Click to expand...
Click to collapse
Ya k, I forgot to include the stock wifi module it seems.
By default, my kernel loads the module in /system/lib/modules/bcm4330.ko, which can lead to problems if you don't have the stock wifi modules.
TWRP seems to still be causing some issues... will look into it for sure. I am currently working on Android 4.2, got it booting up already, but there are some libs that need to be fixed.
If anybody's interested, I upgraded to a working CWM 6.2 Recovery and the CM10 kernel is on its way.
rajeevxperia said:
I flashed the Kernel. After reboot a encounted the same wifi problem. But solved it with flashing the Wifi module.zip. Thanks to the Uploader.
I set the maximum cpu speed and lagfree governer. And What about " SCHEDULERS". ? What is the use of that ? Which one should i set ? I am using Setcpu... Pls reply.. Thanks in advance
Click to expand...
Click to collapse
You might want to use Antutu CPU Master from the Play Store and go to the 'advanced' tab. There you can change your I/O scheduler, which can finally result in much better I/O performance, rad-and-write improvements which can have a massive effect on games, file copying, reading or whatever. Just try and you'll find out soon what suits you best
Might be a stupid question, but would this kernel work in JB MIUI? (ie. the newest MIUI posted here on the Xperia S forum.)
I'm assuming it doesnt since this is for ICS, but thought I'd ask before I'd try it out while I'm at work. Especially since it just said MIUI.
thanks regardless of the answer
Base: CM10 JellyBean - Nightly
Kernel: Nibbles v0.1.5 (hercules port)
Installer: Aroma
Source Sync & Build Date: 1.18.13
Release Date: 1.19.13
Release Version: v1.6
IntroductionBack with ANOTHER port! Guys, make sure that before you even proceed with reading, you go HERE and hit that thanks button for car vs driver! Me and him would appreciate that because he is the one who originally created this ROM. So seriously... DO NOT GO ON WITHOUT DOING THAT! Thanks guys
Click to expand...
Click to collapse
FeaturesPacked full of yummy goodness, stability and speed, this ROM is intended to be a daily driver. This is not a test, experiment or buggy piece of nonsense. I started with CM10 Jellybean-Stable and added numerous enhancements to improve speed, stability and battery life. Installation is a breeze with Aroma, choose which options and applications you want to have - or run it again to install any apps you may have missed (without having to reflash the ROM).
Please read the first three posts completely, then read them again before you flash this for the first time. Any notable bugs are located in the post below. If you experience any issues that have not been reported already, please post to the thread. Thanks!
Click to expand...
Click to collapse
Installation Made Easy:Just download the zip and flash it. The Aroma installer will guide you through a multitude of options, including different launchers, application choices and system options. If you prefer a no fuss installation, there's even an option for a pre-configured base installation. Lastly, if you decide to install any apps you previously chose not to, simply flash the zip and choose the application installer option.
Click to expand...
Click to collapse
Included Applications:Google Apps 4.1, ROM Manager, Root File Explorer, Accuweather, DSP Manager with BEATS Audio, Goo.im and more! The ROM also includes the new UCLK4 radio as an optional installation.
Under the hood are numerous script tweaks, system tweaks and enhancements to balance performance, stability and usability.
Click to expand...
Click to collapse
Nibbles Kernel:Ported by ayysir to the Hercules, please give him thanks HERE
The Nibbles kernel includes a LOT of new features that cater to all users who want to get the most out of their device. I've included many popular CPU Governors and I/O schedulers to support a wide variety of uses. Additionally, I've made lots of other fundamental changes to the kernel to better balance battery and performance (well beyond what you can do with a handful of scripts) as well as implementing over clocking the CPU to 1.782GHz, Under/Over Volting the CPU at each frequency step and over clocking the GPU.
CPU Governors: intellidemand, pegasusq, gallimaurfy, interactivex, smartassv2, wheatley, interactive, conservative, userspace, ondemand, performance
I/O Schedulers: noop, deadline, cfq, sio, vr, bfq
Right now, we only have the Stock GPU Speed version available!
Click to expand...
Click to collapse
Thanks and credits!car vs driver
CyanogenonMod
ayysir
Óðinsdagr
MoNsTeRmAyHeM
jesse0471
Ok, so I think it's important to make sure you guys go hit Thanks! on each of the people noted above next time you see them in a thread.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer: This rom will not prevent a zombie apacalypse. It may however, aid you in the event of an apacalypse by providing stability, battery and smooth cellular operation. By flashing this, your phone should still work ... and as an added bonus, it'll likely work better than your stock rom. If your phone bricks, build a house. By flashing this rom, you agree to have your phone powered by beer and tiny nibbles.
Re: [ROM-JB][Aroma] CvD-Nibbles 1.6 ~ Custom Kernel ~ GAPPS
Installation:Do not flash a ROM or Radio with your phone plugged into USB.
Nandroid your current ROM
Flash the zip from recovery
Aroma installer start and guilde you through the process.
Aroma will also take care of wiping data and caches as needed, so you don't have to do this on your own.
Boot it up
Setup your google account if you installed google apps
Let your google apps sync from play store (if applicable)
Allow installed apps to update from play store (if applicable)
Fix permissions
Reboot
Click to expand...
Click to collapse
DOWNLOAD NIBBLES 1.6 HERE!Download: http://tinyw.in/lhd0
MD5: 6736f0e3ffe4cecdb4fa36e8462419e9
Mirror:
Download: http://d-h.st/KJM
Click to expand...
Click to collapse
Settings and Recommendations
Below are some settings that CvD uses on this ROM for best performance and battery.
CPU Governor: ondemand
Scheduler: CFQ
Settings->Developer Options: On
Settings->Developer Options->Window animation scale: 1x
Settings->Developer Options->Animation duration scale: .5x
Settings->Developer Options->Transition animation scale: .5x
Settings->Developer Options->Force GPU rendering: On
Apex Launcher->Advanced->Keep in memory: On
Settings->Wi-Fi->Advanced->Keep Wi-Fi on during sleep: Always
Settings->Wi-Fi->Advanced->Avoid Poor Connections: On
Settings->Wi-Fi->Advanced->Notify open network: Off
Click to expand...
Click to collapse
Known Bugs:
Bluetooth may crash the first time you open it. Just relaunch and it should be fine. I don't have a means to test bluetooth, if someone wants to offer up a fix, PM me or CvD.
Things of note:
Double check your APN settings after flashing to make sure you're on LTE and it's all correct.
First boot will be slow, have patience. It may take a couple minutes. Subsequent reboots should fly.
If you set your CPU to 196MHz, you will notice some lag when waking up the phone. This is particularly true if you have a live wallpaper.
After first boot, hit the volume rocker to wake up the sound. (This should no longer be an issue)
Changelog InformationThis is obviously where the changelog is This will be set up a bit differently from CvD's or any other one. The changes under the BLUE text are what I, ..Cory.., changed. The changes under the RED text are what CvD changed. My changes will only be ones to improve stability for our phones and I try to make sure all work by CvD is untouched to bring you the full experience he intended to bring!
Click to expand...
Click to collapse
v1.6 Change Log:
1/19/13: OUT OF TESTING
1/19/13: Fixed root issue (hopefully)
1/19/13: Fixed build.prop
1/19/13: Added T989 latest radio (UVLH1) in Aroma
1/5/13: Reverted base to Jellybean CM10 branch
1/5/13: Fixed Instagram photo flickering
1/5/13: Aroma updates
1/5/13: Camera seems to be working fine now.
1/5/13: GPU clocks set to [email protected] [email protected] (stock speeds are optional at time of installation)
Re: [ROM-JB][Aroma] CvD-Nibbles 1.6 ~ Custom Kernel ~ GAPPS
..Cory.. said:
reserved 2
Click to expand...
Click to collapse
One more won't hurt...
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Good work Cory....dont forget to update your sig!!!!!:silly:
Re: [ROM-JB][Aroma] CvD-Nibbles 1.6 ~ Custom Kernel ~ GAPPS
Exelent cory...:thumbup:
Enviado desde mi SAMSUNG-SGH-T989 usando Tapatalk 2
Alright, added download and info in the second post and changelog is in the third post! Enjoy! Don't forget to give CvD thanks!
Re: [ROM-JB][Aroma] CvD-Nibbles 1.6 ~ Custom Kernel ~ GAPPS
HUGE shout out to my testers for helping make this as stable as possible so quick!
Óðinsdagr
MoNsTeRmAyHeM
jesse0471
Thanks guys!
Re: [ROM-JB][Aroma] CvD-Nibbles 1.6 ~ Custom Kernel ~ GAPPS
Great ROM. Fast and stable. A great daily driver.
Thrown at your face by my T989
Definite DD, smooth, no lag that I've found, no flickers, solid port and solid build.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Using my kernel? vedi niceee
All-Star Kernel coming to Galaxy s3 soon
ayysir said:
Using my kernel? vedi niceee
All-Star Kernel coming to Galaxy s3 soon
Click to expand...
Click to collapse
Yes sir!
I hope credits suffice for your needs! I made sure to include a link to your thread and to let everyone know that your work made this possible
Can't wait!
..Cory.. said:
Yes sir!
I hope credits suffice for your needs! I made sure to include a link to your thread and to let everyone know that your work made this possible
Click to expand...
Click to collapse
Thanks man, and remember if your going to make changes yourself you have to post them on github
All-Star Kernel coming to Galaxy s3 soon
itzsmokey said:
Can we use the kernel for CM10?
Click to expand...
Click to collapse
Yes
Sent from my Nexus 4 using xda premium
itzsmokey said:
Can't wait!
Click to expand...
Click to collapse
This ROM is CM10 based
ayysir said:
Thanks man, and remember if your going to make changes yourself you have to post them on github
All-Star Kernel coming to Galaxy s3 soon
Click to expand...
Click to collapse
Yeah man, no problem!
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
So just how smooth and fast is this lol
krazeecracker said:
So just how smooth and fast is this lol
Click to expand...
Click to collapse
Try it!
i installed it exactly as the instructions indicated and i got stuck at the samsung logo and it will not boot any ideas?
Relfash (dirty) over the original flash is more what I meant. I wipe everything except external SD, rebooted into twrp 2.3.3.0, flashed ROM, and the JustinBean inverted gapps, reboot let sit for like 15 and was golden.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2