Develop Bugs

USB not working at all and I need stock

I'm running SRF 1.1.0 with genocide kernel and whenever I connect my phone to my PC, the PC doesnt detect it but if I try with my sister's epic it works so I need to find a way to get complete stock through CWM (I have 3.0.2.5) without using a computer so I can take it to a sprint store can someone please help me either fix the USB or help me get to complete stock without a computer. Thank you

Go to the development section and look for the rerfs rom. Download that it. It will flash a stick ec05 rom rfs with cwm 2.5.1.0. Then in the same thread is the stock recovery. Download that and then boot into the cwm 2.5.1.0 and flash the stick recovery. Now u are on stock ec05 with stock recovery. Hope I helped. That is your best bet since you can't use odin or heimdall
Sent From My Evo Killer!

musclehead84 said:
Go to the development section and look for the rerfs rom. Download that it. It will flash a stick ec05 rom rfs with cwm 2.5.1.0. Then in the same thread is the stock recovery. Download that and then boot into the cwm 2.5.1.0 and flash the stick recovery. Now u are on stock ec05 with stock recovery. Hope I helped. That is your best bet since you can't use odin or heimdall
Sent From My Evo Killer!
Click to expand...
Click to collapse
Thank you so much. Will try one more thing to try to fix my usb and if it doesn't work I will use that.

do you get a charge at all when you connect it? Have you reinstalled the drivers? Sometime a dif usb cord will work also.

phonehunter59 said:
Thank you so much. Will try one more thing to try to fix my usb and if it doesn't work I will use that.
Click to expand...
Click to collapse
No problem man if u need anymore help with anything you can pm me. Good luck
Sent From My Evo Killer!

Did you plug your phone into the same port that your sister's connected with? I found I had to reload the drivers for every USB port on my laptop to make Odin work for each, otherwise it only works for the first one I used.

kennyglass123 said:
Did you plug your phone into the same port that your sister's connected with? I found I had to reload the drivers for every USB port on my laptop to make Odin work for each, otherwise it only works for the first one I used.
Click to expand...
Click to collapse
I tried reloading the drivers and everything and I'm. Using a blackberry cable and I tried different computers but for some reason they still don't work so I'm going to take it to a sprint store because I think its a hardware problem not a software problem and thanks for all the support guys I really appreciate it. One more thing is when I plug in any cable into the wall charger it thinks its a computer and gives me the options for c,harging and mass storage and tethering which its not supposed to do unless its plugged in to a computer

phonehunter59 said:
I tried reloading the drivers and everything and I'm. Using a blackberry cable and I tried different computers but for some reason they still don't work so I'm going to take it to a sprint store because I think its a hardware problem not a software problem and thanks for all the support guys I really appreciate it. One more thing is when I plug in any cable into the wall charger it thinks its a computer and gives me the options for c,harging and mass storage and tethering which its not supposed to do unless its plugged in to a computer
Click to expand...
Click to collapse
I have one charger from an older phone that does that to my phone.

Go too a verizon store buy a usb cable for the droid x. Its an excelent cable . Thick and short. Mounts my phone every time no issues. I've tried like 10 cables. By far the best

I ended up downloading swiftp to connect to computer, was making me mad I couldn't solve it. Its nice and fast.

I'm Just going to do the rerfs rom and take it to a sprint store because I think it's a hardware issue because odin or the computer dont recognize my epic but they recognize my sister's

try turning off usb debugging then connecting usb for mass storage mode that way
i struggled with this on srf forever (and other roms including ee03)

eigerzoom said:
try turning off usb debugging then connecting usb for mass storage mode that way
i struggled with this on srf forever (and other roms including ee03)
Click to expand...
Click to collapse
tried that and no luck before I took it to the sprint store they tried to ODIN back to stock but even their computer wouldn't recognize it so they just gave me a new one.

Need Help/Advice Phone Wont Run Os

i have a samsung epic for sprint and when i turn it on it shows the samsung mobile font with black background and it never loads the rom ive tried to odin it but odin wont find the phone ive downloaded and re installed drivers numerous times and i can get the phone into the downloading mode but my comp doesnt see the phone when its pluggged in idk what to do ive been without a phone for two weeks trying to figure this out any help would be appreciated thanks

First off try different usb cord. Make sure you start odin and load the files and then plug in your phone. Hope this helps
Sent from my SPH-D700 using XDA App

What rom did u try to flash? And are you on rfs or ext4?
Sent From My Epic S 4gizzle Useing XDA Premium App

Take the battery out, plug it in and boot to download mode without the battery
Sent from my SPH-D700 using XDA App

i did all of that this is the tutorial and i downloaded all of the stuff from there and did what it said http://forum.xda-developers.com/showthread.php?t=1052813

Its 2 late now but for anyone else that comes by this thread it is crucial that you have tested if not ODIN recognizes your phone before rooting it and putting a custom zip on your sd card. I can't tell you how many threads I have seen like this.
Before modding your phone what so ever it is a good idea to just open ODIN and see if your phone is using a com port. That way you always have an escape route if things go wrong.
To the original poster. If you tried everything listed in the posts above and still have no luck your only option is 2 find another comp.
Sorry
Sent from my SPH-D700 using XDA Premium App

Did you try flashing a kernel like Genocide after the ROM? That has saved me once before.
Sent from my SPH-D700 using XDA Premium App

In download mode you see the big yellow graphic of an android with a shovel right?
I would suggest using the drivers from samsung.com rather than any you find elsewhere, I've always had better luck with them.
Make sure you reboot your PC right before you try to use odin. Don't put it to sleep/hibernate, actually turn it off and back on.
Finally, try a different micro usb cable and plug into a different usb port. When you plug in, have you computer sound on to listen for the plugnplay "ding" sound - if you hear the sound just let it sit for up to 5min for the drivers to install. Either they will install and odin will give a com port or you will get an error on your PC.
If you get the error (failed to install driver) then you are probably still using the samsung usb cable and truely need to get a different one.
If you are using a diff usb cable, have tried multiple usb ports (front and back) and you have allowed up to 5min for the install but it still won't pick it up, either try with a different computer or take it to sprint and they can odin it for you.
Sent from my SPH-D700 using XDA App

it is rommed now but wont run os like it died oneday and when i charged it it showed the samsung logo for ever so idk

Download Mode Not working?(CM9 Alpha 2)

i was trying to flash back to gingerbread with odin but my pc no longer recognizes the phone when it's in download mode. Never had a problem with this until i flashed CM9 Alpha 2? Am i the only one with this problem ? is there another way i can go back to gb ?

19fonzy said:
i was trying to flash back to gingerbread with odin but my pc no longer recognizes the phone when it's in download mode. Never had a problem with this until i flashed CM9 Alpha 2? Am i the only one with this problem ? is there another way i can go back to gb ?
Click to expand...
Click to collapse
Check drivers and cable. I can almost guarantee that CM9 Alpha 2 didn't break download mode.
Just to verify ... and because I'm bored at work ... I'm on CM9 A2 and using odin to go back to el29 as we speak. No problems with pc recognizing the phone.
As for another way to go back ... no, you'll definately need odin.

19fonzy said:
i was trying to flash back to gingerbread with odin but my pc no longer recognizes the phone when it's in download mode. Never had a problem with this until i flashed CM9 Alpha 2? Am i the only one with this problem ? is there another way i can go back to gb ?
Click to expand...
Click to collapse
Use mobile Odin to flash back to stock also buT can almost guarantee that it won't fix it...I could go into download from cm9 also ...something else with your setup ....drivers or USB probably
Sent from my SPH-D710 using Tapatalk 2 Beta-5

I'm pretty sure it is not my cable because i use it for when i'm charging my phone and it works perfectly fine. when i connect it to my pc, the computer makes a sound but nothing happens. The notification light on my phone turns on but that's about it, it doesn't even charge when connected to my pc.

i've been trying to use mobile odin but whenever i select the stock rom it says partition not found? a little help.

19fonzy said:
I'm pretty sure it is not my cable because i use it for when i'm charging my phone and it works perfectly fine. when i connect it to my pc, the computer makes a sound but nothing happens. The notification light on my phone turns on but that's about it, it doesn't even charge when connected to my pc.
Click to expand...
Click to collapse
To tell you the truth it might sound like a faling usb port. My friend had the same problem with his phone. First it would not connect to transfer data then eventually it would not even charge but in his case the notification light came on as well just nothing else happened.

19fonzy said:
I'm pretty sure it is not my cable because i use it for when i'm charging my phone and it works perfectly fine. when i connect it to my pc, the computer makes a sound but nothing happens. The notification light on my phone turns on but that's about it, it doesn't even charge when connected to my pc.
Click to expand...
Click to collapse
USB power and AC charging are separate lines. You could have nicked the usb and still be able to charge the device.
The fact that you can charge doesn't have any bearing on your ability to use any USB functionality. Only using the same cord on another device completely rules that out.
Have you installed any drivers or software on your computer since the last time you used odin?
Sent from my SPH-D710 using Tapatalk

well like i said before odin worked perfectly fine before i installed cm9. But i'll try installing the drivers. You guys are probable right though I could have nicked the usb and still be able to charge the device. I just want to go back to Stock Gingerbread (el29) just to see if it was CM9 that was causing the problem or if i really did nick the usb port. Can any of you help me with Mobile odin ?

19fonzy said:
well like i said before odin worked perfectly fine before i installed cm9. But i'll try installing the drivers. You guys are probable right though I could have nicked the usb and still be able to charge the device. I just want to go back to Stock Gingerbread (el29) just to see if it was CM9 that was causing the problem or if i really did nick the usb port. Can any of you help me with Mobile odin ?
Click to expand...
Click to collapse
Look at http://forum.xda-developers.com/showthread.php?t=1433101
You just need to download EL29 tar file and put it on your sd card, then in mobile odin choose open file and it will look at the file in your external or internal sd card, once it locates it you hit flash and you should be back to stock roooted el 29

i tried and tried but it just keeps saying " partition not found in file"

are I using the one click self extract....or a tar file
Sent from my SPH-D710 using Tapatalk 2 Beta-5

It has been noted on another thread: Are you using the Sammy USB cable or another? My LG one will charge the E4GT but will not function USB - Sammy one works fine.

SAMSUNG epic 4g stuck on boot screen after trying to restore Stock Rom

I was running CM10 but I got a message whenever I got into the Camera App that said "Unfortunately, Gallery has stopped working", after a research in here I found that I wouldn't get that msg again if I installed this "gapps-jb-picasa-20121011-signed" thing.
I did, but when I got into my Camera App, I didn't have the other options like "Image Effects" and all that stuff.
So, what I did was to Restore my phone from my BackUp folder that I've created before installing CM10, but for my surprise I got a msg saying "VolumeError" or something like that and other things that I can't really remember... and as a good Mexican that I am, I ignored it and hit the Reboot System Now..
What happened next almost made me cry...
I was expecting to get in my stock rom without any problems and yadda yadda but... OH SURPRISE!
I got stuck on the boot screen, where it says "Samsung" and the website of it and I didn't freak out... I waited like 5-6 mins and took the battery out. When I turned again, I tried to get in Recovery Mode but the screen just kept turning off and on and saying the exact same thing, the "Samsung" logo and it's website.
I hope you can help me and please answer me. I don't know if I'm 1000000% screwed but I will only wait for the worst. Sorry for my bad english and don't hate me for being mexican
I don't know if I can get into my phone from my PC but whenever I plug my phone in, it just loads it as if it was in Charging Mode
PLEASE HELP ME!
I BEG YOU!

Flash again CM10 with wipe data, cache, dalvik
If still stuck
Odin to stock ROM, you can search on google to odin the epic
Sent from my JellyBeer v.4.14 epicmtd (b3)

Questions go in Q&A
Thread moved
Friendly Neighborhood Moderator

Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21

AndyYan said:
Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21
Click to expand...
Click to collapse
Thanks to Everyone!
I solved this like 2 hrs after all this happened.
I got it by Odin. I couldn't go into Recovery Mode, but I got in Download Mode and do it by Odin.
Sorry, I'm a n00b to all this.
Greetings from México and thanks for all your support.

Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?

To the OP:
I would follow the instructions in this video from the part where qbking77 talks about putting the phone in download mode, as you presumably did when you first rooted your phone. Download all the files linked/referenced on the site, especially the Samsung mobile drivers, Odinv3 1.87, CWMRecovery, and the deOxed versions of the stock ROM. In sum:
1) get into recovery mode by holding onto the volume down, camera buttons, and then without letting either of those go, press and hold the power button.
if you get into recovery mode, skip to step 4
2) while your phone is completely off, hold onto the "1" button on the slide out keyboard first, then without letting the 1 button go, press and hold the power button until you're in download mode.
3) flash the version of Clockworkmod
4) once in recovery mode, wipe your phone, clear the cache, and dalvik cache, and then flash the deOxed version of the stock ROM
niteNarmor said:
Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?
Click to expand...
Click to collapse
Do you have the mobile drivers installed on the computer you're trying to connect your phone to?

Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".

niteNarmor said:
Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".
Click to expand...
Click to collapse
Uninstall and reinstall drivers.
Sent from my SPH-D700 using Tapatalk 2

Have already done that. But just for laughs, I did do it again with no change.

can you get your D700 into download mode as described above?

Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.

niteNarmor said:
Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.
Click to expand...
Click to collapse
Try to install another version of Odin or getting Odin from a different server.
My phone is fully recovered and now I'm only SuperUser 'cause I don't want any CM by now.
Greetings from Mexico!

I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
EDIT: I have now downloaded and tried 4 different Odin programs with no avail. Again, that makes 6 Odin programs, 6 different USB ports, 3 different cables with the same exact results. The computer recognizes device but Odin will not.

niteNarmor said:
I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
Click to expand...
Click to collapse
Had a simular issue when I had two odins on the same computer, for a lark and as I had nothing better to do, tried installing drivers and one version of odin to a vertual machine running vista and checked to see if my computer's vertual machine would reconize and it did, I took it as a sine that at one point I had done something to my computer's main os sometime between rooting my epic 4g and frying it (recovering from a backup from a different parition layout I think, bad times with bootloops and seeing way to much of the samsung logo.) So as I'm not brave enough to run odin on vm I instead removed all of odin from my main os and all of the samsung drivers, then reinstalled rebooted and repluged my epic in, got reconition and reflashed with plesure.
The other issue might be that your computer is reconizing the device and try/failing/hanging and not allowing odin in. Had an issue when my computer was failing to pop up a 'what do I do with this' window and hanging round in the system. A reboot with the internet unpluged strangely solved that for some reason, might be the reboot might be the combo, but I find better connection reconition with my computer when I've fewer things connected.
Don't mind the spelling to much I clean up with my other device.
Sent from my T-Mobile myTouch 3G Slide using xda app-developers app

One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2

jeffreyjicha said:
One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Phone does not boot past the "Samsung - www.samsung.com" logo. Plus, as with all of my devices, USB debugging is always checked.
Thanks for the suggestion though. Always helps to double check things.
I believe I am going to take it to Sprint tomorrow.
If I can't get into it, they should not be able to get into to it either. If they can't get into it, HELLO WARRANTY....

Perhaps before doing the whole getting found out thing with the return center, perhaps they do know what they're doing, try rolling this link past your eyes?
http://forum.xda-developers.com/showthread.php?t=773032
I know I've been in your boot problem situation and recovered, it just took persistence and eyenumbing amounts of reading.
Note On the multiple Odin, USB, and driver installation: if you've access to another computer it could be worth wile to run once though on a previously virgin computer, meaning your phone and computers' USB's have never touched. Just do the installation, rebooting, and plugging in exasperatingly meticulous order.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"

Yep tried the "virgin computer" computer as well. The computer sees the device but Odin does not. Com light will not illuminate.

Sounds grim.
So to rap up all the cables, plugs, computer, and software with odin is out of the debug process.
So I did some digging into the past and if your computer is reconizing and odin is not then ADB (android debug bridge) and the sdk are the other option
http://forums.androidcentral.com/epic-4g-rooting-roms-hacks/33427-how-access-your-adb-shell.html
Ran across this and it might just be what you need. Its not quick but it has worked for me in the past.
The other thing that may work is ejecting the sd card and battery before doing anything. Though its likely something you've already tried.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"

[Q] [Help!] Bricked Phone with driver problem

Hello everyone...
I was updating the phone recently, and went to reboot it (cyanogen mod ROM btw) and now I have no idea what it did but it is now stuck on the Samsung logo, and their is no recovery I can use on it. Only DL mode works.
I tried to use Odin to relfash but the problem is on both my Windows 7 and Windows 8 computers, they install the drivers, but they still fail to recognize the phone when I plug it in!
I have tried different USB ports, a full driver uninstall, multiple USB cords and the computer refuses to recognize the phone saying "USB Device not recognized"
Again, the drivers install fine, and I did a reboot after each install and uninstall. No luck.

I didnt even install drivers on my W8 netbook and I was able to flash back TWRP using Odin and Download mode yesterday when my attempt at flashing TWRP 2.6.0.4 originally failed.
Fire up download mode, then open up Odin (you should see a COM port open), load up what you need to install, then flash.
What are you trying to flash using ODIN? A bootloader or a ROM?

"BootLooping GhostBrick"
Holy crap! you too? I'm experiencing the same thing too bro. its my girlfriend's phone tho. she's borrowing my Nexus 4 while I work on fixing her SGS2...I seem to have contracted a serious case of the BootLooping GhostBrick, just like you did, right after updating. I went through the same steps troubleshooting as you did, and ...its a guess, but I'm starting to figure the solution will probably include: 1. using ADB to push sum files to the phone, or otherwise somehow reflashing stock firmware from the PC.
2. Re-Root the dam thing and flash a kernel with a recovery (like CWM or TWRP) using rom manager...and 3. Considering installing a ROM of my choice Like PACMAN, or Cyanogenmod.....hmm...Yum
anyway, the search for the vaccine to this dreadful affliction begins. Please post if you find something, I will too.
---------- Post added at 10:21 AM ---------- Previous post was at 10:13 AM ----------
nagoshi said:
I didnt even install drivers on my W8 netbook and I was able to flash back TWRP using Odin and Download mode yesterday when my attempt at flashing TWRP 2.6.0.4 originally failed.
Fire up download mode, then open up Odin (you should see a COM port open), load up what you need to install, then flash.
What are you trying to flash using ODIN? A bootloader or a ROM?
Click to expand...
Click to collapse
...true, I second that. I'm doing this as we speak.

No Go Mi Amigo... PC still No read
vdorvilus said:
Holy crap! you too? I'm experiencing the same thing too bro. its my girlfriend's phone tho. she's borrowing my Nexus 4 while I work on fixing her SGS2...I seem to have contracted a serious case of the BootLooping GhostBrick, just like you did, right after updating. I went through the same steps troubleshooting as you did, and ...its a guess, but I'm starting to figure the solution will probably include: 1. using ADB to push sum files to the phone, or otherwise somehow reflashing stock firmware from the PC.
2. Re-Root the dam thing and flash a kernel with a recovery (like CWM or TWRP) using rom manager...and 3. Considering installing a ROM of my choice Like PACMAN, or Cyanogenmod.....hmm...Yum
anyway, the search for the vaccine to this dreadful affliction begins. Please post if you find something, I will too.
---------- Post added at 10:21 AM ---------- Previous post was at 10:13 AM ----------
...true, I second that. I'm doing this as we speak.
Click to expand...
Click to collapse
.....well, so much for that attempt.... still cant get either the PC or Odin to Read....I just flashed CWM recovery using ODIN minutes ago with no problems, but now its borked too

vdorvilus said:
.....well, so much for that attempt.... still cant get either the PC or Odin to Read....I just flashed CWM recovery using ODIN minutes ago with no problems, but now its borked too
Click to expand...
Click to collapse
Reinstall Odin and the drivers for t989, then go get twrp 2.6.0.4 from techerrata.com/browse/twrp2/hercules then open Odin and put the phone in DL mode, now when odin connects make sure u open the recovery in PDA format and touch nothing else in Odin, flash twrp and ur good, this version is capable of dealing with 4.3 too with no issues at all
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

Same issue
soupysoup said:
Reinstall Odin and the drivers for t989, then go get twrp 2.6.0.4 from then open Odin and put the phone in DL mode, now when odin connects make sure u open the recovery in PDA format and touch nothing else in Odin, flash twrp and ur good, this version is capable of dealing with 4.3 too with no issues at all
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Re-installing Odin and drivers still didn't get Odin to recognize the device in download mode. Windows 7 isn't assigning it any COM port, and nothing can be flashed unless Odin sees the com port the device is on. I used Goo Manager to flash TWRP 2.6.0.3 over my previous 2.6.0.0 version and now I'm stuck on samsung logo, can't reboot to recovery and PC won't recognize device in download mode. Anyone know a solution?

VermontKindBud said:
Re-installing Odin and drivers still didn't get Odin to recognize the device in download mode. Windows 7 isn't assigning it any COM port, and nothing can be flashed unless Odin sees the com port the device is on. I used Goo Manager to flash TWRP 2.6.0.3 over my previous 2.6.0.0 version and now I'm stuck on samsung logo, can't reboot to recovery and PC won't recognize device in download mode. Anyone know a solution?
Click to expand...
Click to collapse
Welcome to ur first soft brick, and as I said in ur other post u need to disable or removes Samsung kies before trying to use Odin as long as any part of kies is running even in background Odin won't see the device, also make sure u use factory/data approved USB wires, also try diff ports, sometimes Odin won't see com3 but will see com5, be patient and follow this and ull be fine, also twrp2.6.0.3 has been known to cause sftbricks, DL 2.6.0.4 from techerrata.com/browse/twrp2/hercules its the newest and 4.3 compatible
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

Yup
soupysoup said:
Welcome to ur first soft brick, and as I said in ur other post u need to disable or removes Samsung kies before trying to use Odin as long as any part of kies is running even in background Odin won't see the device, also make sure u use factory/data approved USB wires, also try diff ports, sometimes Odin won't see com3 but will see com5, be patient and follow this and ull be fine, also twrp2.6.0.3 has been known to cause sftbricks, DL 2.6.0.4 from its the newest and 4.3 compatible
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah, I wish I'd known that. Goo Manager automatically selected it as the latest recovery. I just can't get past the device not showing up as a com port issue at all. Is there any known way to make windows recognize it?

VermontKindBud said:
Yeah, I wish I'd known that. Goo Manager automatically selected it as the latest recovery. I just can't get past the device not showing up as a com port issue at all. Is there any known way to make windows recognize it?
Click to expand...
Click to collapse
Yes u need to make sure kies isn't running or installed on ur PC, if it is Odin won't see it
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

Unrecognized by PC
VermontKindBud said:
Yeah, I wish I'd known that. Goo Manager automatically selected it as the latest recovery. I just can't get past the device not showing up as a com port issue at all. Is there any known way to make windows recognize it?
Click to expand...
Click to collapse
It's not a matter of trying different com ports, I can't get the PC or Odin to recognize the phone in download mode despite uninstalling kies, installing the latest drivers twice, 3 different OEM cables, multiple usb ports, nothing. when I plug it in, Windows doesn't make any sound like with other usb devices, nor does it try and search for drivers. Are there any other options short of JTAG repair?

VermontKindBud said:
It's not a matter of trying different com ports, I can't get the PC or Odin to recognize the phone in download mode despite uninstalling kies, installing the latest drivers twice, 3 different OEM cables, multiple usb ports, nothing. when I plug it in, Windows doesn't make any sound like with other usb devices, nor does it try and search for drivers. Are there any other options short of JTAG repair?
Click to expand...
Click to collapse
I was going to reply earlier, but I got side tracked and this guy is literally having the exact same problem as me. I tried multiple OEM cables, and ports and Windows recognized it but it still won't let me USE it. Odin (after re-install) still shows no connections or ports.
Also, yeah this phone isn't mine either, my Dads. He is using my old S3 for now and is quite mad with me hahaha.
So yeah, I have to re-cap...
-Updated through Goomanager.... (the culprit I am guessing)
-Rebooted
-Got stuck on the Galaxy S 2 screen
-Plugged in with 4 USB cables to three different USB ports
-Uninstalled and reinstalled Odin numerous times, each with a reboot between.
-Odin fails to recognize it
-Windows KNOWS IT IS THERE, and makes a sound when plugged in, however it says "USB Device not recognized"
Any more ideas?
Thanks for the help to guys it is very much appreciated. I will donate to the person that can help me out of this

Here is a screen shot of Windows with the phone in DL mode

LGIQEXPO said:
Here is a screen shot of Windows with the phone in DL mode
Click to expand...
Click to collapse
Do u have Samsung kies installed on the PC? If u do your going to need to remove all traces of it in order for Odin to see the phone, also search Samsung t989 USB drivers and install the specific driver for Hercules, if u can get the phone into DL mode its fixavke so don't stress to much, I use Odin v1.85, download twrp2.6.0.4 from this site techerrata.com/browse/twrp2/herculesif Odin still fails to recognize the device try diff PC, factory/data approved USB wire, an make sure kies is nowhere and it should work, pm me if u need more help I'll do what I can, but like I said as long as DL mode is accessible its only a soft brick...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

soupysoup said:
Do u have Samsung kies installed on the PC? If u do your going to need to remove all traces of it in order for Odin to see the phone, also search Samsung t989 USB drivers and install the specific driver for Hercules, if u can get the phone into DL mode its fixavke so don't stress to much, I use Odin v1.85, download twrp2.6.0.4 from this site techerrata.com/browse/twrp2/herculesif Odin still fails to recognize the device try diff PC, factory/data approved USB wire, an make sure kies is nowhere and it should work, pm me if u need more help I'll do what I can, but like I said as long as DL mode is accessible its only a soft brick...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Kies is no where in sight. I will try yet another PC as well as searching for Hercules specific drivers (any link?) When I get home. Thank you in the mean time

LGIQEXPO said:
Kies is no where in sight. I will try yet another PC as well as searching for Hercules specific drivers (any link?) When I get home. Thank you in the mean time
Click to expand...
Click to collapse
Just Google Samsung t989 Hercules USB drivers, download and install, it should work, like I said as long as DL mode is accessible it should be an easy fix...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

Omg....

I am experiencing the same problem. Did anyone find the solution?

Probably a faulty USB port. My computer shows that message all the time, only one of them works correctly. If not, you just need to install the correct USB Drivers, because even if you don't have them it should recognize your phone as a Samsung phone but will say that the drivers did not install correctly.