Hey guys so I bought the Skinomi, Xtreme Guard, and Realook screen protector to test and use. There are some notes that I hope you'll find useful.
Skinomi (~$7 shipped) :
Feels thinner in width than both of XG and Realook. The holes are cutout precisely for the speaker, proximity sensor, and front facing camera so that the entire screen (cept those three places) are protected. It also has less slip than XG. This requires water to apply. Comes with a plastic business card, a very nice box, and a tube of water/soap solution.
Xtreme Guard ($2 shipped):
Similiar to Skinomi with water application needed. The cutouts actually covers the proximity sensor and the front facing camera and speaker are cut straight out (see pictures below). Note: their customer service is excellent; my first order was defective and they immediately shipped one the next day. Comes with a small plastic piece to straighten out bubbles.
Realook ($12 shipped for 2 pieces)
The only place that is not covered is the speaker: front facing camera and proximity are both covered. The surface is slick hard plastic, not soft and grippy like the other two. The protector does not require water and is similar to the two pieces (front back) that you simply peel off and apply. Includes an alcohol wipe, lint-free cloth.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
Just wanted to share my idea. I have a heavy duty occupation and went with copter screen protector and a wallet case. The wallet case has snap on attachment and opens from right to left. The sleeve has three card slots and a bill slot. In my opinion the sleeve was quite annoying since it's so light it wants to close over the screen all the time. I got the idea to put a thin metal plate in the bill slot to make the sleeve heavy enough to make it fall open easier. The bill slot is exactly the size of the screen, so there won't be any pressure marks on the screen from the edges of the plate. I cut the plate with small margin and smoothed the edges and corners so as not to cut the sleeve. Bonus effects are added protection against pressure and blunt trauma and added weight (I tend to drop my phones if they are too lightweight). I'm still on the lookout for an even thinner and lighter sheet of metal to use but am quite pleased with this solution as is.
Re: Wallet case with metal plate
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So here I have two pretty cheap accessories products for OnePlus One
Casebase Premium Tempered Glass Screen Protector TWIN PACK
I would say its a great value product as you get two for £9.99. I have an experience with Nillking product where I found this is more fingerprint resistive. Its crystal clear, no picture distortion, no sharp edges. Pretty happy with it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cotechs® - Gel Case Skin TPU
This is really cheap but good quality gel skin. All the cut outs are in right place and align. Its really tight so it fits and hold really good. You can choose from different colour variations. For this money you can't get wrong
Good set up. So far I'm waiting on a screen protector. I thought I would be fine without a case but something like this case would be good.
Too bad they don't ship that case to the US...
Sent from my One using XDA Free mobile app
Is the lip so high that you can lay the phone face down without it resting on the screen?
Unfriendly said:
Is the lip so high that you can lay the phone face down without it resting on the screen?
Click to expand...
Click to collapse
I would say yes.but cos its so cheap the piece from piece may differ
Dear all,
I just got today my P10 plus. Before unboxing it I bought a glass screen protector (the one with the two black band on the top and botton). Then I removed the plastic film there was on the display but before installing the glass protection it seems there's already another glass screen protection. You can see it going around the upper part of the fingerprint sensor. Please see the attached picture.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
. I tried to pill it off but it seems hard glued on the screen. Is this a glass screen protection or just another plastic film? The fact is that if I do not remove it the protection I bought won't fit perfectly on the screen seens it has a full hole for the fingerprint and with the "original" one I can't fit perfectly on the bottom of the fingerprint sensor.
Sorry for my english.
There's two - the one with the red tab on it that's meant to be removed before you use it, and the one that's meant to be used as a screen protector.
I took both off.... it seems very stuck but it's actually just really well fitting - it comes off fine..... I got the one with white at top and bottom and round the sides - works brilliantly.
is it true that the display on Plus is better as far as the color saturation goes ?
Hi friends.
Today i received Poetic AFFINITY case and Poetic tempered glass. First i need to say that glass and case fits perfect together. Glass is full adhesive and it's made from superior 9H tempered glass that is scratch resistant and shatterproof protecting your screen from scratches to high impact drops. Oleophobic Anti-Fingerprint Coating keeps your screen free of fingerprints and oily smudges and is easy to clean. The touch response is great and I didn't need to increase the sensitivity on the device itself. Only problem that glass have is black edge that cover maybe 1mm on each side of the screen.
Cases from Poetic is one of the best for me. Cheap but perfect. This honeycomb look is super cool. I have white s10e and it's look perfect. Buttons access and function are great. When you put phone on table you have some gap so you dont have worries (maybe 1mm). All cutouts are made very well and are easy to use.
Poetic cases is on the top as usual
I only wish there were more color options (citrus green is my favorite)
This is my opinion and you can read some more on the links:
https://www.poeticcases.com/products/tempered-glass-2019-samsung-galaxy-s10e-screen-protector
https://www.poeticcases.com/products/affinity-2019-samsung-galaxy-s10e-case
You can buy this on poetic site, amazon, ebay,....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I be more concerned with a good case as that provides most of the protection in a drop.
The screen protector is mostly for sand and mar protection.
blackhawk said:
I be more concerned with a good case as that provides most of the protection in a drop.
The screen protector is mostly for sand and mar protection.
Click to expand...
Click to collapse
Yes
Any LOCA screen protector is worth it, but you'll have to have se patience installing. I like matte protectors so I use this https://www.amazon.com/dp/B0957SJBMM?ref=ppx_pop_mob_ap_share
I would recommend rhinoshield. Its a custom material that works better than glass.
I favor hydrogels like Gorilla IQ Sheild.
Easy to apply, inexpensive and long lasting.
Hi, I'm using OnePlus sandstone case w/ Whitestone Dome UV glass.
I recommend installing by aligning up the camera hole without trying to use the included frame. You can find videos how to install. Make sure screen clean, glue in center, set glass nice and slow as not to splash. Make sure you at least tape your earpiece speaker so glue don't get into.