Develop Bugs

Ghetto Dock 1.0

So i realized i had a problem.. i had no dock. I saw some other self made docks around the forum and realized i didn't have any of the supplies So i made my own.
Required:
1 red cup
2 Screws
1 push pin
2 Screw anchors (thx MV10 for clearing that up )
Basically place the cup upside down, place the two screws equally apart on the bottom, place the two screw holsters on the sides of the push pin (mine fit fairly snug actually) then find the spot you'd like to angel your phone with and place it in, put the phone on and verify you like how it feels (might take a few adjustments here and there). Enjoy
I know it's extremely ghetto but hey it's labor day, and i'm at work (sucks) and there was nothing to do!
Attached is an image of the final product.

Sure it's ghetto, but it works and I'll bet you weren't bored for about half an hour finding the supplies and putting it together. Plus you can feel self satisfied whilst you watch your video

nicholson317 said:
Sure it's ghetto, but it works and I'll bet you weren't bored for about half an hour finding the supplies and putting it together. Plus you can feel self satisfied whilst you watch your video
Click to expand...
Click to collapse
Sooo True! the cool thing about this is, the bezel on the phone actually kinda locks into the screws...the only funny thing is when i get a text the entire cup starts moving rofl.. Watching Kick-Ass on it right now too Working perfectly for what it's worth

The things you're calling "screw holsters" are called anchors.

MV10 said:
The things you're calling "screw holsters" are called anchors.
Click to expand...
Click to collapse
Thanks, i was wondering what they were actually called I'll update it

Whats the point of this? Not asking to be a jerk...i just dont get it.
Sent from my SGH-T959 using XDA App

NoDataFound said:
Whats the point of this? Not asking to be a jerk...i just dont get it.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Read the thread title, it clearly says DOCK in it, and GHETTO. Do the math.

i made a kickstand with a paperclip... photos via the girlfriends mytouch slide
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Awsome ideas on the dock and the kickstand.

Here is a link to do a paper clip stand (it has been discussed before, but for the ones who don't know about it), includes a template.

StefanB86 said:
Here is a link to do a paper clip stand (it has been discussed before, but for the ones who don't know about it), includes a template.
Click to expand...
Click to collapse
hahaha he sure put alot more thought into it than i did... lol looks awesome i will soon have 2 docks to choose from

Man that guy put a lot of effort into that paper clip. Maybe to much, but I can really appreciate his efforts and willingness to share.

Sent myself the paper clip one to try at work..... during my break of course

talltexan said:
Sent myself the paper clip one to try at work..... during my break of course
Click to expand...
Click to collapse
Haha, I was @ work earlier when i made the dock... and the funny thing is i couldn't find a freakin paperclip which led me to using the red cup, the screw anchors and the screws (from a d-link switch box) rofl...

Breffo SpiderPodium

I bought a few days ago the Breffo Spider Podium with some doubt about the size, but once in my hands the result is spectacular.
To use as dock, as camera support (to timelapse for example), to see tv or videos, simply espectacular.
two days from amazon.com, and a reasonable price.
Search it!

I broke leg on it...but apart from that is so helpful thing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

auau! one broken leg??? its seems too hard to break!!!
i take care with it!

skymota said:
auau! one broken leg??? its seems too hard to break!!!
i take care with it!
Click to expand...
Click to collapse
No its easy to brake it

skymota said:
some doubt about the size
Click to expand...
Click to collapse
So now you don't think it's at all too small? Definately no need to go for the Spider Podium Tablet model?

timboyce94 said:
So now you don't think it's at all too small? Definately no need to go for the Spider Podium Tablet model?
Click to expand...
Click to collapse
No no! its perfect with Note

avetny said:
No no! its perfect with Note
Click to expand...
Click to collapse
Thanks.
One more question, how well does it fold up (obviously it can fold up) securely and safely for travel in a bag or something... Anyone can upload a pic of it folded up nicely for travel? Do you guys use some kind of pouch for it or just loose?

timboyce94 said:
Thanks.
One more question, how well does it fold up (obviously it can fold up) securely and safely for travel in a bag or something... Anyone can upload a pic of it folded up nicely for travel? Do you guys use some kind of pouch for it or just loose?
Click to expand...
Click to collapse
Bump? Thanks.

This seems to be interesting also.
http://www.x-idip.com/

emo99 said:
This seems to be interesting also.
Click to expand...
Click to collapse
It seems cool!

I found a very cheap one:
http://www.eforchina.com/v/93677

anonymous572 said:
I found a very cheap one:
...
Click to expand...
Click to collapse
Nice. Just one thing. It's hard to judge, but from the little info provided there it seems a bit on the small side...

Great find! Just a little worried if its the actual Breffo branded one or just a generic no brand one since its half the price of the amazon ones. Anyone willing to take one for the forum? =D

DealsSeeker said:
Great find! Just a little worried if its the actual Breffo branded one or just a generic no brand one since its half the price of the amazon ones. Anyone willing to take one for the forum? =D
Click to expand...
Click to collapse
That's right, the size info does not seem to match what you read in the breffo.com product-info page, for instance:
Chinese page: 10) Size: 195x51x5mm
Breffo page: Thickness: 7mm

[Q] recommended slim case with no S-Pen troubles

I had two cases already,
a 360 case and a slim leather with magnets.
the 360 was very convenient for standing positions with alot of options, but was too big.
the leather was very slim and comfort for holding and taking away, but the angles for positions were lacky and the magnets are messing up with my S-Pen and that's unacceptable for me. The tablet is 90% for studying (I write on it as notebook) and I have to have it working..
Do any of you perhaps found some good cases with fine viewing angles and positions but yet slim and light?
I only care for 2 viewing angles:
~80 degree, a standing one for watching, it doesn't have to be super stable at that one
~30 degree, for writing, this one must be stable.
I'm willing to invest few extra bucks for a fine case.
please share what have you already found, I don't wanna waste more money and time for 'testing'.. Asking the sellers is pointless, they barely speaks English and 100% don't understand what the freak do I want from them
Thanks alot ahead!

I bought this 2 years ago, It still works great but it's no longer available on Amazon:
http://www.amazon.com/gp/product/B0089FCX9O/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
These 2 look pretty much identical to the one I have:
http://www.amazon.com/MoKo-Slim-Fit-Folio-Samsung-Galaxy/dp/B0088I9AX4/ref=pd_cp_pc_0
http://www.amazon.com/i-Blason-Samsung-Galaxy-Version-Android/dp/B008L3C2MW/ref=pd_cp_pc_1

bluzman said:
]http://www.amazon.com/i-Blason-Samsung-Galaxy-Version-Android/dp/B008L3C2MW/ref=pd_cp_pc_1[/url]
Click to expand...
Click to collapse
We have two of these One For each of our note 10.1 .. still looks and works great..

erica_renee said:
We have two of these One For each of our note 10.1 .. still looks and works great..
Click to expand...
Click to collapse
bluzman said:
I bought this 2 years ago, It still works great but it's no longer available on Amazon:
http://www.amazon.com/gp/product/B0089FCX9O/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
These 2 look pretty much identical to the one I have:
http://www.amazon.com/MoKo-Slim-Fit-Folio-Samsung-Galaxy/dp/B0088I9AX4/ref=pd_cp_pc_0
http://www.amazon.com/i-Blason-Samsung-Galaxy-Version-Android/dp/B008L3C2MW/ref=pd_cp_pc_1
Click to expand...
Click to collapse
Thank you very much,
a question for both of you:
if you put the case on that angle:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can you lean your hand on it and write? is it comfort for writing or does it bounce up and down easily? how stable is it?
Also, have you found one of these (especially the Moko one that caught my eyes) on eBay?
I'm not from USA, so amazon is pretty useless for me, and I can't find it on eBay aswell

mcjordan92 said:
Thank you very much,
a question for both of you:
if you put the case on that angle:
Can you lean your hand on it and write? is it comfort for writing or does it bounce up and down easily? how stable is it?
Also, have you found one of these (especially the Moko one that caught my eyes) on eBay?
I'm not from USA, so amazon is pretty useless for me, and I can't find it on eBay aswell
Click to expand...
Click to collapse
It Does Bounce some. Also if you stand it up it will try to slide out of the Clips. I put a piece a two sided tape on the back across the top to prevent this..
But in either position i can Use the s-pen. I like the case because its simple but protects the screen from scratching when out and About.

I agree - in the position shown, I have no problem using the S-Pen.

[Q] OPO Origami dock?

Hi
Got my OPO from an online store in Malaysia (I'm from the Philippines). It comes with this extra package
I've watched a lot of OPO unboxing but I haven't seen this before
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
At the back
Inside is this thingymajig. I'm pretty sure this is some sort of a dock or something
Rear view
Tried putting it together. With all my best efforts, I've failed.
Only got this far. I dunno how to build the back part.
I tried searching for it on the interwebz but to no success.
Can anyone please point me out to a tutorial on how to build this?
Extra info: My OPO doesn't come with the Cyanogenmod logo at the back (dunno if this is a good thing). And it's got ColorOS bundled (Now using temasek's).
TIA!!

Have you scanned that qr code? May be some info will be there.
fired from A0001

it redirects here:
http://mp.weixin.qq.com/scanproduct?p=CAEQBBoNNjkyMTgxNTYwMDAxNQ==&extinfo=
turned out to be a dead end

pabling19 said:
it redirects here:
http://mp.weixin.qq.com/scanproduct?p=CAEQBBoNNjkyMTgxNTYwMDAxNQ==&extinfo=
turned out to be a dead end
Click to expand...
Click to collapse
It's meant to redirect to a WeChat profile.

Looks pretty cool hope you finish it and show use how it works/looks, good luck!

@pabling19 care to share a scan of the sheet? maybe on a black background, so that we could see where to cut

ozone89 said:
@pabling19 care to share a scan of the sheet? maybe on a black background, so that we could see where to cut
Click to expand...
Click to collapse
That'd be awesome! :laugh:

I also have this cartoon. Lol bought my OPO from Lazada got an imported unit from China. Couldnt also figured it out.
Sent from my 1+1 using Tapatalk

DrearierJester1 said:
I also have this cartoon. Lol bought my OPO from Lazada got an imported unit from China. Couldnt also figured it out.
Sent from my 1+1 using Tapatalk
Click to expand...
Click to collapse
then the request for a scan is extended to you as well
I'd gladly SVG the **** out of it :3

opo
i found out that if you bend inside the others parts it fits
works for me, i hope it helps

Hi,
Sorry for the late reply. I was away on vacation lol.
I hope this will suffice. I dont really have access to a scanner. I just laid the thingy flat and PSed the background
http://i.imgur.com/bQC996T.jpg
ibvil said:
i found out that if you bend inside the others parts it fits
works for me, i hope it helps
Click to expand...
Click to collapse
Can we please have a photo for reference? Thanks in advance!

pabling19 said:
Hi,
Sorry for the late reply. I was away on vacation lol.
I hope this will suffice. I dont really have access to a scanner. I just laid the thingy flat and PSed the background
http://i.imgur.com/bQC996T.jpg
Click to expand...
Click to collapse
Thank you very much!
How is the slot made? Is it folded inwards? If so, guess I'll have to work a bit with scissors and glue ?
Can you provide the measure of that big horizontal fold near the top, so that I could calculate its dimension (preferably in metric)? ☺
Thank you again! ?

no idea if this is right or not (dont have the dock) but it looks like it might be an opening for a "speaker"
if you look in the bottom of the slot where the phone sits, you can see that its open for the speakers.....so maybe the sound gets directed down and out the back side of the dock.....maybe?
dont have anything that I can draw, but the opening at the back might point towards the phone....so the sound kinda loops around.

Benuo Leather Card Case

Hey guys, I recently got hooked up with the sweet case. It's made by a company called Benuo. I got the black version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I really liked it. It definitely will come in handy on a vacation or short get away. I tested it in a few different scenarios. It doesn't work with Samsung Pay if you have two cards in it (which is the purpose of the case.) If you don't use Samsung Pay, this won't be a big deal. I use Samsung Pay for nearly all my purchases so the case will only be used when going somewhere where I'd like to have less in my pockets.
I also tested it with wireless charging. That was a hit or miss. It worked with my stock Samsung Wireless Fast Charger but didn't with my off brand wireless fast car charger. Also, when I did wireless charge it, it retained a lot of heat. (I'd recommend not using the case while wirelessly charging.)
Overall, I think the quality of the case is decent. It gets the job done while providing its purpose, to hold two of your cards. I don't see myself using it unless I will be on vacation or going out. That isn't to say that it isn't a great case cause it is. I'd definitely recommend it to someone who would like to save some room in there pockets.
Purchase link:
https://www.amazon.com/dp/B06Y26XGC6/ref=cm_sw_r_cp_apa_uzfozbJBW2F67

You know your image is broken right? And, there's no link to the site that sells it.

sanjsrik said:
You know your image is broken right? And, there's no link to the site that sells it.
Click to expand...
Click to collapse
IDK what happened, will fix shortly. Thanks! (Link added)
Sent from my SM-G955U using Tapatalk

Link is now broken
Link leads to lola who is one of amazon's dogs. Nice dog, but otherwise, probably NOT the product you are hoping to show.

Lol, Now that's funny . But would like to see case pictures...

sanjsrik said:
Link leads to lola who is one of amazon's dogs. Nice dog, but otherwise, probably NOT the product you are hoping to show.
Click to expand...
Click to collapse
Link works fine for me. Must have been an issue on Amazon's end. Re-uploading pics now...

galaxys said:
Lol, Now that's funny . But would like to see case pictures...
Click to expand...
Click to collapse
Fixed pics. lol

I too picked up this case. I have to admit... I really like this case. The fit is good but the corners are not snug. I thought that was a flaw until I needed to use Samsung pay. It came right off with no issue and came back on.
The leather is legit. Stitching was strong. While it won't be my daily driver, its good when I go out.