Edit - Problem was after flashing hboot I could not boot into recovery .... I tried multiple recovery images AmonRa and Cwm but it would never boot.
Solved - I have no idea how, I downloaded the recovery image again with the same link as the previous images, all md5sums were ok, but the 4th download worked and I was able to flash + boot into recovery again? Do I have some other problem though because I don't see why it took so many flashes for me to be able to access recovery again?
Alphrev Cm7 r2
Bravo PVT1 Ship S- OFF
Hboot-6.83.1002
Radio-5.17:52.18
C:\android\tools>fastboot devices
HT~~####93 fastboot
C:\android\tools>fastboot flash hboot bravo_alphaspl-cm7r2.img
sending 'hboot' (512 KB)...
OKAY [ 0.096s]
writing 'hboot'...
OKAY [ 0.164s]
finished. total time: 0.261s
C:\android\tools>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.094s]
finished. total time: 0.094s
C:\android\tools>fastboot erase cache
erasing 'cache'...
OKAY [ 0.039s]
finished. total time: 0.040s
Reboot to recovery - stuck on splash??? Using Reflex S...
Edit - After trying to boot to recovery, sat on splash screen for 40 mins and then my bootanimation randomly started... everything is just back to normal?
I can't seem to be able to flash recovery though, it just doesn't boot into it?! I've tried a couple of images and checked md5sum's but it always sticks on splash??
hmm that's strange, suppose you could try to flash a different HBOOT, then try a different recovery - that's what I'd do anyway
bortak said:
hmm that's strange, suppose you could try to flash a different HBOOT, then try a different recovery - that's what I'd do anyway
Click to expand...
Click to collapse
I shouldn't of posted really but something that usually take 10 minutes took an hour or two.... I used the exact command everytime and the same files... It just didn't work!? I'm still really confused but happy it's working
Hello everyone, I made a mistake (I am a big noob) and I don't know how to fix it.
I wanted to have fresh phone (real factory reset) to back-up and start over, so in recovery mode (interim one from paul) I wiped data, cache partition and I also formated cache,data, sdcard and system.
Now, I am stuck on htc quietly brilliant screen, I have access to hboot, recovery etc. I have been looking for a solution for 2 days without succes, I am sad.
Can someone help please ? thanks guys.
You wiped the system so there is no android on there!
Eirher download a new Rom and flash or relock bootloader and use ruu
Sent from my HTC One X using xda premium
Thanks sir, I'll try.
sotirios said:
Thanks sir, what can I do ? Which part I did wrong ? thanks again
Click to expand...
Click to collapse
The part you did wrong: It's true that you wipe (dalvik) cache and data before flashing a custom rom. That will perform a factory reset. Wiping system means deleting android itself, as stated before. That's what you did wrong.
Now, we can't know why you wanted to start all over again, but assuming you already flashed a custom recovery, you wanted to install a custom rom. Just go ahaed and do so, your problem will be fixed.
thanks, but I can't because this custom recovery doesn't allow me to mount usb and i have no rom on my sd card
sotirios said:
thanks, but I can't because this custom recovery doesn't allow me to mount usb and i have no rom on my sd card
Click to expand...
Click to collapse
That's not actually a problem. I assume you aleady have the android SDK set up, if you don't, please use the search function or google. try the following command while in the platform-tools folder:
adb push path/to/custom/rom /sdcard
or for linux/mac:
sudo ./adb push path/to/custom/rom /sdcard
This will copy the file to the root of your sdcard, so you can flash it. Good luck!
P.S. there's a thanks button, too
dobbi10k said:
That's not actually a problem. I assume you aleady have the android SDK set up, if you don't, please use the search function or google. try the following command while in the platform-tools folder:
adb push pfad/zu/einer/custom/rom /sdcard
or for linux/mac:
sudo ./adb push pfad/zu/einer/custom/rom /sdcard
This will copy the file to the root of your sdcard, so you can flash it. Good luck!
P.S. there's a thanks button, too
Click to expand...
Click to collapse
That wont work as ADB does not work on any of the custom recoveries at the moment. Im stuck in the same situtation at the mo and as phone is branded cant get the RUU to reflash so just playing the waiting game until either ADB/USB mount available in recovery or S-Off available.
See my thread in development thread
http://forum.xda-developers.com/showthread.php?t=1599748
Sent from my HTC One X using XDA
Hi lee james, thanks, I followed your thread but I don't know how to install ruu after relocking my bootloader, can you help me please ? thx again.
"Eirher download a new Rom and flash"
I can't flash, my ssd is wiped too and i can't mount usb with this custom recovery
"That's not actually a problem. I assume you aleady have the android SDK set up, if you don't, please use the search function or google. try the following command while in the platform-tools folder:
adb push pfad/zu/einer/custom/rom /sdcard"
It doesn't work, it doesn't find my device, even with the adb devices command
sotirios said:
Hi lee james, thanks, I followed your thread but I don't know how to install ruu after relocking my bootloader, can you help me please ? thx again.
Click to expand...
Click to collapse
Go to development thread then shipped ruu ans download specific to ur phone. Follow and Job done
Sent from my HTC One X using XDA
Same problem here! I unfortunatly erase everything from my one x and i can't restore anything!! How can i solve it?? My device is unlocked but stay in s-on mode! Why? From fastboot i can't flash anything! Help!!
Hello folks, problem solved by following leejames instructions :
flash stock recovery
relock bootloader
use ruu
I'm so happy. Thanks.
Mee too!! Thanks a lot!! I'm very very very very very very very very very very very very very very happy!!
1 flash stock recovery
2 relock bootloader
3 use ruu
It works fine!!
I do exactly the same thing , but half way through the RUU process it gives me an error saying i need the correct RUU. anyone can help ?
All you have to do is grab an RUU, run it. now on your pc search for %temp%in there locate ROM.zip. Extract the boot.img and system.img. and push them thru fastboot
Code:
fastboot flash boot boot_signed.img
Code:
fastboot flash system system.img
Code:
adb reboot
i did that , but i get this error:
C:\ADB>fastboot flash boot boot_signed.img
sending 'boot' (4278 KB)...
OKAY [ 0.741s]
writing 'boot'...
FAILED (remote: not allowed)
finished. total time: 0.942s
C:\ADB>fastboot flash system system.img
sending 'system' (979509 KB)...
FAILED (remote: (00000008))
finished. total time: 0.001s
I used the latest RUU uploaded 3 days ago in the filefactory folder.
mahdibassam said:
i did that , but i get this error:
C:\ADB>fastboot flash boot boot_signed.img
sending 'boot' (4278 KB)...
OKAY [ 0.741s]
writing 'boot'...
FAILED (remote: not allowed)
finished. total time: 0.942s
C:\ADB>fastboot flash system system.img
sending 'system' (979509 KB)...
FAILED (remote: (00000008))
finished. total time: 0.001s
I used the latest RUU uploaded 3 days ago in the filefactory folder.
Click to expand...
Click to collapse
Is your bootloader unlocked?
When I do it with an unlocked bootloader the error changes to this:
C:\ADB>fastboot flash boot boot_signed.img
sending 'boot' (4278 KB)...
OKAY [ 0.741s]
writing 'boot'...
FAILED (remote: not allowed)
finished. total time: 0.942s
C:\ADB>fastboot flash system system.img
sending 'system' (979509 KB)...
FAILED (remote: (00000008))
finished. total time: 0.001s
Nobody can help me?!! ((
Hi, my kf2 is stucked at fastboot, i'm not able to boot into recovery or system, i have succesfully installed fff-1.4a using a factory cable (because it was bricked with the stock bootloader) and have installed the otter2-twrp-2.4.4.0-recovery.img from hashcode..
It boots and i see the blue kindle logo, and have a menu, but when i select recevery it just turns on the amber light and stays there, i have left it for about 5 minutes waiting to see if it get to revery with no luck.
I tried this:
Code:
sudo fastboot -i 0x18d1 getvar product
< waiting for device >
product: kindle
finished. total time: 0.000s
sudo fastboot -i 0x18d1 oem format
...
OKAY [ 0.068s]
finished. total time: 0.068s
Then
Code:
sudo fastboot -i 0x18d1 flash boot fff-u-boot_v1.4a.bin
< waiting for device >
sending 'boot' (243 KB)...
OKAY [ 0.065s]
writing 'boot'...
OKAY [ 0.051s]
finished. total time: 0.115s
sudo fastboot reboot
rebooting...
sudo fastboot -i 0x18d1 flash boot fff-u-boot_v1.4a.bin
< waiting for device >
sending 'boot' (243 KB)...
OKAY [ 0.065s]
writing 'boot'...
OKAY [ 0.051s]
finished. total time: 0.115s
It succeed as you can see, it has the fff bootloader and twrp recovery is installed!!
Then i tried
Code:
sudo fastboot -i 0x18d1 flash zip cm-10.1-20130704-NIGHTLY-otter2.zip
< waiting for device >
sending 'zip' (155204 KB)...
OKAY [ 38.806s]
writing 'zip'...
FAILED (remote: partition does not exist)
finished. total time: 38.813s
It seem like a partition table problem maybe because i'm trying to install Cyanogenmod and not a stock image...
I think maybe i must reformat the partitions but i only have access to fastboot and i have read the documentation of Android Fastboot in OmapPedia but i'm not sure it's a "generic" information and don't want to mess up things more.
I have read many trheads in the forum but all of them use adb and there's not a thread with instructions about it..
Or maybe i need to flash all the images (system, kernel, etc..) with fastboot but i don't know where to get it, the main problem is that i'm not able to boot into recovery and maybe that point to the real problem
Any help is appreciated !!
Thank's
You can't write CyanogenMod from fast boot.
Sounds like somewhere in there you formatted the system partition. You need the stack file on the system partition in order to boot into recovery.
Restore to stock using fast boot and try again.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
How?
mindmajick said:
You can't write CyanogenMod from fast boot.
Sounds like somewhere in there you formatted the system partition. You need the stack file on the system partition in order to boot into recovery.
Restore to stock using fast boot and try again.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Maybe it is the problem as fastboot oem format seems to do the job...
I have downloaded the stock update-kindle-6.3.2_D01E_4110520.bin, please can you point to the thread explainig how to do that using fastboot or it's just as easy as rename the file to update.zip and flash it directly?
Edited: also i'm not completely sure it's a kf2 and can't get a hint on how to discover it without knowing the is version :banghead: I've looked one the motherboard and is a MB0090 F3F.
I've downloaded the stock bin for the kf2 too...
Thank' for your quick reply
Well. If you have a kf2... The update you downloaded is wrong. IT'S FOR THE ORIGINAL KINDLE FIRE.
Without knowing what device u have u better slow down a sec. Any advice i give COULD permabrick u of you're on the wrong device.
What color was the BOX it came in? What is the model# on the back? (Same for kf1 AND 2 BUT NOT THE KF HD 7" OR 8").
Be advised- this device is EASY TO BRICK. BE CAREFUL.
--
Sent from my mind to your screen.
---------- Post added at 02:48 AM ---------- Previous post was at 02:40 AM ----------
Also. The correct update file wont work either.
You can only flash image files from fastboot.
--
Sent from my mind to your screen.
It's apparent you have a KF1 and not a KF2. The command "fastboot -i 0x18d1..." would not work on the KF2 because it still has the stock bootloader (unless something miraculous happened while I was AFK). The stock bootloader has a VID of 1949, and will not answer to commands using a different VID. 18d1 is Goggle's VID and is indicative of having FFF installed (KF1 only).
BTW, the "-i 0x18d1" part is completely unnecessary on FFF.
That's not your biggest problem though....
Code:
sudo fastboot -i 0x18d1 flash boot fff-u-boot_v1.4a.bin
That command is completely wrong. What you're doing there is flashing the bootloader (fff-u-boot_v1.4a.bin) to the boot (kernel) partition. Obviously, there is no way that could possibly would work out for you. After the "fastboot" portion of the command, you need to specify what you want done with the image in question: flash or boot. "Flash" is persistent, "boot" is for one boot only. In the next part of the command, you need to specify which partition the image in question goes to; bootloader, recovery, boot, etc.
What you need to do is get an actual recovery.img and flash it to your recovery partition before you can even think of accessing said recovery to flash a ROM and get your device working again.
soupmagnet said:
It's apparent you have a KF1 and not a KF2. The command "fastboot -i 0x18d1..." would not work on the KF2 because it still has the stock bootloader (unless something miraculous happened while I was AFK). The stock bootloader has a VID of 1949, and will not answer to commands using a different VID. 18d1 is Goggle's VID and is indicative of having FFF installed (KF1 only).
BTW, the "-i 0x18d1" part is completely unnecessary on FFF.
That's not your biggest problem though....
Code:
sudo fastboot -i 0x18d1 flash boot fff-u-boot_v1.4a.bin
That command is completely wrong. What you're doing there is flashing the bootloader (fff-u-boot_v1.4a.bin) to the boot (kernel) partition. Obviously, there is no way that could possibly would work out for you. After the "fastboot" portion of the command, you need to specify what you want done with the image in question: flash or boot. "Flash" is persistent, "boot" is for one boot only. In the next part of the command, you need to specify which partition the image in question goes to; bootloader, recovery, boot, etc.
What you need to do is get an actual recovery.img and flash it to your recovery partition before you can even think of accessing said recovery to flash a ROM and get your device working again.
Click to expand...
Click to collapse
Well you are completely right!! Didn't realize I was flashing it to the kernel partition, I bought this on eBay and it was already bricked, when I used the factory cable first time I got a lab26 device, and it was a 1949 so, if I'm right it's a kf2.
I've already flashed a twrp recovery but it won't boot.. I'll try sintering else and post the results here
Sent from my SPH-D710 using xda premium
LUC4X said:
when I used the factory cable first time I got a lab26 device, and it was a 1949 so, if I'm right it's a kf2.
I've already flashed a twrp recovery but it won't boot.. I'll try sintering else and post the results here
Click to expand...
Click to collapse
No. The stock bootloader on all generations and variants of Kindle Fires have vendor IDs of 1949. The fact that your device responds to the "fastboot -i 0x18d1..." clearly means you have a custom bootloader installed in its place. If you have an actual custom bootloader installed (not 2nd bootloader) then you clearly cannot possibly have a KF2.
In this thread, you say you have installed recovery twice, but the information given seems to suggest otherwise.
So to try and get to the root of the problem, what is the exact command you used to install custom recovery, and what custom recovery (version) did you install?
Glad you are here soupmagnet!
I didn't even look at the commands he was using but i definitely learned stuff from your posts. Thanks again
--
Sent from my mind to your screen.
Commands used
soupmagnet said:
No. The stock bootloader on all generations and variants of Kindle Fires have vendor IDs of 1949. The fact that your device responds to the "fastboot -i 0x18d1..." clearly means you have a custom bootloader installed in its place. If you have an actual custom bootloader installed (not 2nd bootloader) then you clearly cannot possibly have a KF2.
In this thread, you say you have installed recovery twice, but the information given seems to suggest otherwise.
So to try and get to the root of the problem, what is the exact command you used to install custom recovery, and what custom recovery (version) did you install?
Click to expand...
Click to collapse
Sorry guys i was out of town...
These are the commands (bootloader & recovery) i've used till now:
sudo fastboot -i 0x18d1 flash bootloader fff-u-boot_v1.4a.bin
< waiting for device >
sending 'bootloader' (243 KB)...
OKAY [ 0.065s]
writing 'bootloader'...
OKAY [ 0.083s]
finished. total time: 0.148s
sudo fastboot -i 0x18d1 flash recovery otter2-twrp-2.4.4.0-recovery.img
sending 'recovery' (8153 KB)...
OKAY [ 2.042s]
writing 'recovery'...
OKAY [ 2.705s]
finished. total time: 4.748s
Click to expand...
Click to collapse
Also tryed the twrp from teamw's site in both versions (otter & blaze) just to make sure, by issuing the following commands:
sudo fastboot -i 0x18d1 flash recovery openrecovery-twrp-2.5.0.0-blaze.img
< waiting for device >
sending 'recovery' (6144 KB)...
OKAY [ 1.540s]
writing 'recovery'...
OKAY [ 1.514s]
finished. total time: 3.054s
Click to expand...
Click to collapse
With this, when i reboot and select the recovery it turns on the amber light for 2 seconds and shuts down.
Then when i install the other recovery version (blaze from teamw):
sudo fastboot -i 0x18d1 flash recovery openrecovery-twrp-2.5.0.0-otter.img
< waiting for device >
sending 'recovery' (6144 KB)...
OKAY [ 1.540s]
writing 'recovery'...
OKAY [ 0.684s]
finished. total time: 2.224s
Click to expand...
Click to collapse
When select recovery i get the same result: amber light for 2 seconds and turns off.
And with hashcode otter2-twrp-2.4.4.0-recovery.img:
sudo fastboot -i 0x18d1 flash recovery otter2-twrp-2.4.4.0-recovery.img
< waiting for device >
sending 'recovery' (8153 KB)...
OKAY [ 2.042s]
writing 'recovery'...
OKAY [ 0.894s]
finished. total time: 2.937s
Click to expand...
Click to collapse
It hangs on amber light and i have to manually turn it off holding the power buttom for 10 seconds...
So you think it is a kf1 based on the device id?, it shows that id after i installed the fff-u-boot_v1.4a.bin from hashcode that i intended for the kf2...
Well, based on that i have installed a kf1 bootloader:
Downloaded the Kindle Fire Utility v0.9.9.zip from http://forum.xda-developers.com/showthread.php?t=2192818
Unzipped it (as i'm GNU/Linux)
"Grepped" recursively till find the web address to download files from
Downloaded fff-u-boot_v1.4a.bin
Downloaded openrecovery-twrp-2.4.4.0-blaze.img
Followed the install procedure
Same result !!, still can't get it to boot into recovery...
Really i hope someone here can point me to the right direction to fix this tablet, can't figure out what's wrong with kf(?)
LUC4X said:
So you think it is a kf1 based on the device id?, it shows that id after i installed the fff-u-boot_v1.4a.bin from hashcode that i intended for the kf2...
Well, based on that i have installed a kf1 bootloader:
Downloaded the Kindle Fire Utility v0.9.9.zip from http://forum.xda-developers.com/showthread.php?t=2192818
Unzipped it (as i'm GNU/Linux)
"Grepped" recursively till find the web address to download files from
Downloaded fff-u-boot_v1.4a.bin
Downloaded openrecovery-twrp-2.4.4.0-blaze.img
Followed the install procedure
Same result !!, still can't get it to boot into recovery...
Really i hope someone here can point me to the right direction to fix this tablet, can't figure out what's wrong with kf(?)
Click to expand...
Click to collapse
Lets get a few things clear right off the bat. The file named fff-u-boot_v1.4a.bin is the custom bootloader for the KF1. The bootloader flashed in the KF2 2nd bootloader installation is named otter2-u-boot-prod-10.2.4.bin. If you flash the fff-u-boot_v1.4a.bin (FFF1.4a) onto a KF2, you would end up with something that is slightly less useful than a doorstop.
Why you re-installed it is a mystery to me. You already had FFF1.4a installed. I know this (as I explained earlier) by the fact that your commands, using the "-i 0x18d1" switch, were successful. If you had a stock bootloader, no commands containing that particular vendor ID would work at all. If you had a KF2, there is absolutely NO WAY you would have a device that responds to fastboot commands using "-i 0x18d1". Even with a modified KF2, with 2nd bootloader installed, the vendor ID would still be 1949 and all fastboot commands must include "-i 0x1949" or they will not work. You can confirm the fact that you have FireFireFire installed by entering a fastboot command without adding "i- 0x18d1". With FireFireFire (KF1 only), the commands will still work because it is unnecessary to specify the vendor ID.
That being said, I'm not entirely sure what's going on with TWRP using both "otter" and "blaze" for the board name (I think it has something to do with Goo Manager?), but anything you get from the TWRP website should work for the KF1 (for the time being at least). Anything you get from Hashcode will be for the 2nd generation KFs.
I would suggest, to avoid complicating things any further, that you download Cannibal Open Touch recovery, confirm that the MD5sums match after downloading, and flash it to recovery in fastboot. COTR only works for the KF1 (not made for the 2nd Generation devices yet) so there is "practically" no way you can get the wrong one. If that works and you still want to try TWRP, download the one for Blaze, check the MD5 (as you should with everything), and try flashing it in recovery again.
If you still can't get your device to boot into recovery, try the command again, but replace the word "flash" with the word "boot" and leave out the partition (i.e. 'fastboot boot openrecovery-twrp-2.4.4.0-blaze.img'). If the device boots into recovery, then you know you have the right one and you may have bad blocks in your recovery partition preventing it from booting, but you won't know for sure without checking a few things out first.
Followed your instructions and get the same result...
Maybe i should install a complete system from fastboot and let it try to boot, but where can i get those files?
What do you think?
soupmagnet said:
Lets get a few things clear right off the bat. The file named fff-u-boot_v1.4a.bin is the custom bootloader for the KF1. The bootloader flashed in the KF2 2nd bootloader installation is named otter2-u-boot-prod-10.2.4.bin. If you flash the fff-u-boot_v1.4a.bin (FFF1.4a) onto a KF2, you would end up with something that is slightly less useful than a doorstop.
Why you re-installed it is a mystery to me. You already had FFF1.4a installed. I know this (as I explained earlier) by the fact that your commands, using the "-i 0x18d1" switch, were successful. If you had a stock bootloader, no commands containing that particular vendor ID would work at all. If you had a KF2, there is absolutely NO WAY you would have a device that responds to fastboot commands using "-i 0x18d1". Even with a modified KF2, with 2nd bootloader installed, the vendor ID would still be 1949 and all fastboot commands must include "-i 0x1949" or they will not work. You can confirm the fact that you have FireFireFire installed by entering a fastboot command without adding "i- 0x18d1". With FireFireFire (KF1 only), the commands will still work because it is unnecessary to specify the vendor ID.
That being said, I'm not entirely sure what's going on with TWRP using both "otter" and "blaze" for the board name (I think it has something to do with Goo Manager?), but anything you get from the TWRP website should work for the KF1 (for the time being at least). Anything you get from Hashcode will be for the 2nd generation KFs.
I would suggest, to avoid complicating things any further, that you download Cannibal Open Touch recovery, confirm that the MD5sums match after downloading, and flash it to recovery in fastboot. COTR only works for the KF1 (not made for the 2nd Generation devices yet) so there is "practically" no way you can get the wrong one. If that works and you still want to try TWRP, download the one for Blaze, check the MD5 (as you should with everything), and try flashing it in recovery again.
If you still can't get your device to boot into recovery, try the command again, but replace the word "flash" with the word "boot" and leave out the partition (i.e. 'fastboot boot openrecovery-twrp-2.4.4.0-blaze.img'). If the device boots into recovery, then you know you have the right one and you may have bad blocks in your recovery partition preventing it from booting, but you won't know for sure without checking a few things out first.
Click to expand...
Click to collapse
Followed your instructions and get the same result...
Maybe i should install a complete system from fastboot and let it try to boot, i've found you uploaded a system.img to androidfilehost...
What do you think?
I posted that ages ago. I'm not even sure what device it's for.
Check the file size. If it's around 350MB go ahead. If it's closer to 500MB then it's probably for the HD.
I can't imagine why you couldn't load recovery using the 'fastboot boot recovery.img' command. Did you receive any errors when trying?
soupmagnet said:
I posted that ages ago. I'm not even sure what device it's for.
Check the file size. If it's around 350MB go ahead. If it's closer to 500MB then it's probably for the HD.
I can't imagine why you couldn't load recovery using the 'fastboot boot recovery.img' command. Did you receive any errors when trying?
Click to expand...
Click to collapse
There's not error message, this is the output:
Code:
sudo fastboot boot CannibalOpenTouch-v2.1_otter.img
< waiting for device >
downloading 'boot.img'...
OKAY [ 1.394s]
booting...
OKAY [ 0.004s]
finished. total time: 1.398s
But it never boots up and stays off.
I'm seriously thinking it may be a hardware failure but i wont give up until i'm completely sure about it.. that's why i though i should reformat partitions at the first time but the fastboot oem format command "seems" to work, perhaps it takes very short time to execute 0.068s and it is a very short time, so i though maybe it isn't really formatting anything, is it a "normal time"?
Right now i'm downloading the file it's 380MB maybe something good could happen!!
I'll try the following and will post the results:
Code:
fastboot flash system system.img
fastboot erase userdata
fastboot erase cache
fastboot reboot
LUC4X said:
There's not error message, this is the output:
Code:
sudo fastboot boot CannibalOpenTouch-v2.1_otter.img
< waiting for device >
downloading 'boot.img'...
OKAY [ 1.394s]
booting...
OKAY [ 0.004s]
finished. total time: 1.398s
But it never boots up and stays off.
I'm seriously thinking it may be a hardware failure but i wont give up until i'm completely sure about it.. that's why i though i should reformat partitions at the first time but the fastboot oem format command "seems" to work, perhaps it takes very short time to execute 0.068s and it is a very short time, so i though maybe it isn't really formatting anything, is it a "normal time"?
Right now i'm downloading the file it's 380MB maybe something good could happen!!
I'll try the following and will post the results:
Code:
fastboot flash system system.img
fastboot erase userdata
fastboot erase cache
fastboot reboot
Click to expand...
Click to collapse
The command 'fastboot oem format' will only make sure the partition layout is stock, it does not format the partitions themselves. The information within the limits of the partitions will remain untouched, so it won't do you much good in this situation. The only way to properly format any partition is with recovery (or 'parted' which is usually run from recovery anyway). Your situation is rather unique because the "fastboot boot' command doesn't write anything to the recovery partition. It loads the disk image you choose, into active memory, as if your computer were a separate partition on which that image is stored. There shouldn't be any reason for it to not work properly.
Try to flash the system partition you downloaded and see how it goes. I would also suggest that you make absolutely sure the md5sums match before installing any image to your device, including the recovery images you downloaded before.
soupmagnet said:
The command 'fastboot oem format' will only make sure the partition layout is stock, it does not format the partitions themselves. The information within the limits of the partitions will remain untouched, so it won't do you much good in this situation. The only way to properly format any partition is with recovery (or 'parted' which is usually run from recovery anyway). Your situation is rather unique because the "fastboot boot' command doesn't write anything to the recovery partition. It loads the disk image you choose, into active memory, as if your computer were a separate partition on which that image is stored. There shouldn't be any reason for it to not work properly.
Try to flash the system partition you downloaded and see how it goes. I would also suggest that you make absolutely sure the md5sums match before installing any image to your device, including the recovery images you downloaded before.
Click to expand...
Click to collapse
Code:
sudo fastboot flash system system.img
sending 'system' (389120 KB)...
OKAY [ 97.308s]
writing 'system'...
OKAY [ 36.819s]
finished. total time: 134.131s
sudo fastboot erase userdata
erasing 'userdata'...
OKAY [116.935s]
finished. total time: 116.935s
sudo fastboot erase cache
erasing 'cache'...
OKAY [ 29.189s]
finished. total time: 29.189s
sudo fastboot reboot
rebooting...
finished. total time: 0.000s
Must be hardware, it's sad... if it where a SMD flash memory i would try to changed it but it's a tyni BGA chip...
Thank you very much for your help
I wouldn't give up just yet. You can still try to usbboot, using the shorting trick.
soupmagnet said:
I wouldn't give up just yet. You can still try to usbboot, using the shorting trick.
Click to expand...
Click to collapse
I'll try tonight !!
Sent from my SPH-D710 using xda premium
soupmagnet said:
I wouldn't give up just yet. You can still try to usbboot, using the shorting trick.
Click to expand...
Click to collapse
./usb_fix_parts_and_install_fff_twrp
Loading FFF through USB...
?
waiting for OMAP44xx device...
sending 2ndstage to target...
waiting for 2ndstage response...
sending image to target...
Fixing partitions...
< waiting for device >
... OKAY
Installing x-loader...
sending 'xloader' (128 KB)... OKAY
writing 'xloader'... OKAY
Flash FFF...
sending 'bootloader' (211 KB)... OKAY
writing 'bootloader'... OKAY
Flash TWRP...
sending 'recovery' (5260 KB)... OKAY
writing 'recovery'... OKAY
Resetting bootmode to standard boot...
... OKAY
Loading TWRP...
downloading 'boot.img'... OKAY
booting... OKAY
Click to expand...
Click to collapse
Same as before, it won't reboot after sending the boot to recovery command and if try to get into recovery it turns off after an amber light..
LUC4X said:
Followed your instructions and get the same result...
Maybe i should install a complete system from fastboot and let it try to boot, but where can i get those files?
What do you think?
Click to expand...
Click to collapse
At the begining i saw you were using "fastboot flash zip...." that's wrong command.. should be "fastboot flash update xxxx.zip"
so if you find the totally package, youcan use it.
also you has mixture the boot.img and bootloader.bin..
recovery is not needed if you can flash the right bootloader and boot.:laugh: